Sintai Product Catalog

Product Catalogue of Sintai Communication
OTNS8600 Optical Transmission Network System
OTNS8600 WDM Equipment

With the rapid development of the Internet, the bandwidth pressure caused by the spurt growth of data traffic makes it
imperative to introduce a 100G system into the transmission network. Therefore, Sintai communication co., ltd. has
introduced a new generation of high-capacity, long-distance 100G wavelength division transmission Equipment OTNS8600
series products. The product uses advanced transmission technology and high integration technology to support
single-channel transmission rate from 100Mbps to 100Gbps, and provides wide bandwidth, large capacity and fully
transparent transmission for 200Gbps and 400Gbps expansion, enabling smooth upgrade of capacity. It provides a stable
platform for multi-service operation and future network upgrade and expansion. It is widely used in operators, broadcasting,
IDC, finance, government, cloud network, big data and other industries.
Product Diagram  Product features

 Huge capacity transmission
Supports 96×100G ultra-large capacity transmissions, that is, single
fiber transmission capacity up to 9.6Tb/s, and support
80/96×10G/100G hybrid transmission, supporting smooth upgrade
OTNS8600 IB | 1RU from 40 waves to 80 waves, 48 waves to 96 waves. It ensures low
investment and smooth expansion in the early stage of network
construction to meet the growing bandwidth demand in the future.
 Excellent 100G transmission performance
100G system adopts PDM-QPSK coding technology for coherent
detection, supports SD-FEC, B2B OSNR tolerance index is
OTNS8600 IF | 1RU
excellent, adopts industry advanced DSP processing technology,
dispersion tolerance is 22000 ps/nm, and supports 1200 km or more
of non-electric relay transmission. Save investment and greatly
facilitate operation and maintenance.
 Flexible and comprehensive service access capability
Supports 100M-100G any service access: CPRI1~10, eCPRI,
FE/GE/10GE/25GE/40GE/100GE, FC 1G~32G, STM-N,
OTNS8600 II | 2RU OTU1/2/3/4, etc. Transparent transmission reduces the

cross-transmission delay of the circuit.
 Telecom Reliable protection
Supports multiple network protection schemes such as optical layer
1+1 channel protection and optical line side 1+1 protection,
providing multiple protection for important equipment units and
optical fiber lines.
Support AC 220V, DC -48V power supply, 1+1 power protection.
 Excellent structure, convenient and easy to maintain
It adopts 1U, 2U, 5U standard 19-inch rack design, completely
configuration-free installation, device plug-and-play, and unified
OTNS8600 V | 5RU
network management platform, providing complete network and
equipment performance monitoring capabilities.
Product specification
Function Note
Product model OTNS8600 IB OTNS8600 IF OTNS8600 II OTNS8600 V
1U: (back-power 1U: (front -power 2U: (front -power 5U: (front -power
Equipment Size
supply) supply) supply) supply)
（H x W x D, mm）
44×442×280 44×442×220 88×442×220 220×442×220
Service slot 4 slots 4 slots 8 slots 16 slots
Power consumption 120W (Max) 120W (Max) 180W (Max) 450W (Max)
Max channel number CWDM: 18 wavelength, DWDM: 96 wavelength（50GHz）
Single channel max rate 100Gbit/s
Line side rate 1.25Gbit/s, 2.5Gbit/s, 8Gbit/s, 10Gbit/s, 16Gbit/s, 25Gbit/s, 40Gbit/s, 100Gbit/s
 STM-1/4/16/64/256、OC-3/12/48/192/768
 OTU-1/2/3/4
Support service  FE/GE/10GE/25GE/40GE/100GE
 FC 1G/2G/4G/8G/16G/32G
 EPON, GPON, CPRI 1/2/3/6/7/10, eCPRI
Clock features Support IEEE 1588V2
Network topology Point to point, chain type, star type, ring type
Optical channel 1+1 protection, optical multiplex 1+1 protection, optical line 1+1
Network level protection
protection
Equipment level protection Power supply backup
Network management SNMP, Web, CLI, Telnet
"19"and 23" cabinets, ETSI 300mm/600mm cabinets
Installation
Wireless outdoor base station cabinet, FTTX outdoor cabinet, hanging wall
Working temperature range -10℃～60℃
Working humidity range 5~95% no condensation
Storage temperature range -40℃～85℃
Heat dissipation Fan cooling

Power supply mode AC: 90 ~ 260V or DC: -36 ~ -72 V
Network positioning
OTNS8600P Integrated DWDM Equipment

Based on optical integration technology, Sintai Communication Co., Ltd independently developed OTNS8600 P-type
integrated wavelength division equipment, 80G, 160G, 400G, 480G transmission capacity to build networks in batches,
eliminating complex optical layer configuration, reducing the tedious Connected to the optical fiber, the switch-type
connection is connected, the network is built quickly, and the maintenance is simple. It perfectly matches the transmission
requirements of the customer's metropolitan area, and solves the customer's demands to the greatest extent.
Product features
 1U rack device, ultra-high integration design,
compared to traditional solutions, the cabinet space
saving 90%
 Single-channel access rate up to 10 Gbit/s and
adaptive access to all types of services at rates of 10
Gbit/s or lower (like FE/GE/10GE LAN, 10GE WAN,
STM-1~64, etc.)  Single device supports up to 480G transmission
 Support 1+1 line protection on the optical cable side, capacity, 80G/160G/400G/480G devices can be
automatically select transmission routes, and flexibly selected according to service requirements,
improve network reliability and stacking is supported to increase the
 In-band monitoring channel, optical path connectivity transmission capacity
enables SNMP management across the connection  The networking is simple, the original network
of optical road topology is not changed, no complicated optical layer
 Dual-server power configuration, hot-pluggable, 1+1 design, and only the device model is selected based
hot backup using Load Share on the number of attenuation or kilometers.
 One-box delivery by site, power-free distribution, plug  Service port is completely physically isolated and
and play; no fiber jump, no manual intervention transparently transmitted to improve network security.
Function Note
Equipment Size 1U: 44 mm (H)×442 mm (W)×560 mm (D)
Max channel number 480G
Single channel max rate 10Gbit/s

100M ～ 10G All services, including STM-1/4/16/64, OC-3/12/48/192, FE, GE, 10GE,
Support service
FC100/200/400/800/1200, FICON, ESCON, CPRI 1/2/3/6/7 and others services
Clock features Support IEEE 1588V2
Network level protection Support optical line 1+1 protection
Installation 19” 600mm cabinet
Working temperature range -10℃～60℃ (typical)
Working humidity range 5~95% no condensation
Storage temperature range -40℃～85℃

Power supply mode AC: 90 ~ 260V or DC: -36 ~ -72 V (support 1+1 backup power input)
Power consumption <400W (Max)
MTBF ＞100000 hours

100G OTU: 1*CFP+1*QSFP28

100G OTU card launched by Sintai Communication Co., Ltd. supports one 100G service access, adopts advanced
technologies such as PDM-QPSK modulation and coherent reception, and overcomes the OSNR requirements, CD
tolerance, and PMD tolerance of high-speed transmission systems. And the nonlinear physical effects of transmission, such
as 100G service 1200 km or more of non-electrical relay transmission, and the line side interface supports C-band 96-wave
(50 GHz) adjustable.
Product diagram
Functional structure
Function Note
 Client-side interface: 1 QSFP28 hot-pluggable
Interface
 WDM-side interface: 1 CFP hot-pluggable, coherent PDM-QPSK
Support one 100G service transmission, transform one 100G service optical signal into
Line mode
one DWDM standard wavelength optical signal
Relay mode Support 100G wavelength electrical relay
 100GE
Support service type
 OTU4
WDM technology Support DWDM: C band 50GHz 96 wavelengths adjustable
FEC technology Support SDFEC
Occupied slot number Support OTNS8600 series chassis, occupy 2 slots

 Support real time monitoring of the port working state, including: transmitting optical
Network management
power and receiving optical power, temperature, etc.
function
 Support port loopback and port shutdown
Max power consumption 50W (including transceiver)

40G&100G OTU: 4*QSFP28

40G&100G OTU service card launched by Sintai Communication Co., Ltd. supports two 40G or 100G service access. Its
main function is to perform 3R regeneration of two 40G or 100G service signals that are accessed, and can be transformed
into two WDM standard wavelength optical signal, so that the multiplexer unit performs wavelength division multiplexing on
optical signals of different wavelengths, and at the same time implements the inverse process of the above process. It’s
suitable for short-range transmission of wavelength division in metro areas at 40G or 100G rates.
Product diagram
Function Note
Application 100G wavelengths transform 40G wavelengths transform
 Client-side interface: 2 QSFP28  Client-side interface: 2, QSFP+
hot-pluggable hot-pluggable
interface
 WDM-side interface: 2 QSFP28  WDM-side interface: 2, QSFP+
hot-pluggable hot-pluggable
Supports two 100G service transparent Supports two 40G services for transparent
transmissions, which can transform two transmission, which can transform two 40G
Line mode
100G service optical signals into two WDM service optical signals into two WDM
standard wavelength optical signals standard wavelength optical signals.
 100GE  40GE
 OTU4  OTU3
 Support 40G&100G wavelength electrical relay
Relay mode
 Optical signal single, multi-mode transform
WDM technology Support DWDM: C band 100GHz 40wavelengths
Occupied slot number Support OTNS8600 series chassis, occupy 1 slot

Network management
function
Max power consumption 20W (including transceiver)

40G&100G Muxponder: 4*SFP28↔QSFP28

40G&100G muxponder service card launched by Sintai Communications Co., Ltd. supports 4x10G↔40G or 4x25G↔100G
electrical layer multiplexing/demultiplexing, and transform the multiplexed/demultiplexed optical signals into WDM standard
wavelength optical signals. It can facilitate the wavelength division multiplexing of the optical signals of different
wavelengths by mux unit, and simultaneously implementing the inverse process of the above process. It’s suitable for
10G~25G forward multiplexing or 40G/100G inverse multiplexing wavelength division short-distance transmission solution.
Product diagram
Function Note
Application 4x10G↔40G & 4x25G↔100G 40G↔ 4x10G & 100G↔4x25G
 Client-side interface: 4 SFP28  Client-side interface: 1 QSFP28
hot-pluggable, compatible with SFP+ hot-pluggable, compatible with QSFP+
interface
 WDM-side interface: 1 QSFP28  WDM-side interface: 4 SFP28
hot-pluggable, compatible with QSFP+ hot-pluggable, compatible with SFP+
Supports 4*10G & 4*25G service optical Supports one 40&100G service optical signal
Basic function signals to be multiplexed into one 40&100G demultiplexed into 4*10G & 4*25G rate WDM
rate WDM standard wavelength optical signal standard wavelength optical signals
 10GE, 25GE
 40GE, 100GE
Support service type  8G/10G/16G FC (compatible 32G )
 OTU3, OTU4
 STM-64, OTU2, CPRI/eCPRI
Support CWDM: 18 waves
WDM technology Support DWDM: C band 100GHz 40 waves
Support DWDM: C band 50GHz 80 waves
Network management
function
Power consumption 13W (max, including transceiver)

25G OTU: 8*SFP28

25G OTU service card launched by Sintai Communication Co., Ltd supports four types of service access with 16 to 32G
rates. Its main function is to finish the 3R regeneration of any 4-channel signals under any protocol within the rate of 25
Gbit/s to be accessed, and then convert them to optical signals of a standard DWDM wavelength or standard CWDM
wavelength, so that the multiplexing unit can conduct WDM for optical signals of different wavelengths and also achieve the
inverse process of the above process. It’s applicable to the wavelength division transmission solution for 25G rate services,
and compatible with 16G or 32G FC.
Product diagram
Function Note
 Client-side interface: 4 SFP28 hot-pluggable
interface
 WDM-side interface: 4 SFP28 hot-pluggable
Supports transparent transmission of any type of service in four 16G~32G rate ranges, and
Line mode
converts four service optical signals into four WDM standard wavelength optical signals.
Relay mode Support 16G~32G wavelength electrical relay
 25GE
Support service type  16G FC(compatible 32G)
 ECPRI、CPRI 10
Adaptive 16~32G rate adaptive, configuration free
 Support CWDM: 18 waves
WDM technology
 Support DWDM: C band 50GHz 80 waves
Network management
function
 Support port loop back and port shutdown

10G OTU: 8*SFP+

10G OTU service card launched by Sintai Communication Co., Ltd. supports four types of service access with 42M~11.3G
rates.，its main function is to finish the 3R regeneration of any 4-channel signals under any protocol within the rate of 1.25
Gbit/s~11.3 Gbit/s to be accessed, and then convert them to optical signals of a standard DWDM wavelength or standard
CWDM wavelength, so that the multiplexing unit can conduct WDM for optical signals of different wavelengths and also
achieve the inverse process of the above process. It’s applicable to the wavelength division transmission solution for any
access of services with the rate of 11.3G or below.
Product diagram
Function Note
Card type 10G OTU-3R 10G OTU-2R
 Client-side interface: 4 SFP+ hot-pluggable, compatible with SFP
interface
 WDM-side interface: 4 SFP+ hot-pluggable, compatible with SFP
Supports transparent transmission of any type of service in four 42M~11.3G rate ranges, and
Line mode
converts four service optical signals into four WDM standard wavelength optical signals.
Relay mode Support 42M~11.3G wavelength electrical relay
 GE, 10GE  FE, GE, 10GE
 1/2/4/8/10G FC  1/2/4/8/10G FC
 STM-16/64  STM-1/4/16/64, OTU1/OTU2/OTU2e
 CPRI-2/3/6/7  CPRI-1~8, 42M~11.3G Any
WDM technology
Network management Support real time monitoring of the port working state, including: transmitting optical power
function and receiving optical power, temperature, etc.
PON OTU: 8*SFP

PON OTU service card launched by Sintai Communication Co., Ltd. supports four types of EPON or GPON service access，
its main function is to finish the 3R regeneration of any 4-channel PON signal to be accessed, and then converts them to
optical signals of a standard DWDM wavelength or standard CWDM wavelength, so that the multiplexing unit can conduct
WDM for optical signals of different wavelengths and also achieve the inverse process of the above process. It is applicable
to multiple PON port aggregation remote wavelength division transmission solution to achieve wide coverage of PON and
save fiber resources.
Product diagram
Function Note
 Client-side interface: 4 SFP hot-plug gable
Interface
 WDM-side interface: 4 SFP hot-plug gable
Supports 4 EPON or GPON services for transparent transmission, converting 4 PON service
Line mode
optical signals into 4 WDM standard wavelength optical signals
Relay mode Support 4*PON wavelength electrical relay
 EPON
 GPON
Adaptive EPON、GPON adaptive, configuration free
WDM technology
Remote distance GPON max remote distance 50km, EPON max remote distance 35km
Network management
function
 Support port loop back and port shutdown
EDFA: Erbium-Doped Fiber Amplification Card

EDFA is an erbium-doped fiber amplification card launched by Sintai Communication Co., Ltd. Its main function is to
compensate the power of the signal light in the transmission link, and it can amplify the optical signals of up to 48 channels
(channel interval of 100 GHZ) or 96 channels (channel interval of 50 GHZ) at C band at the same time. It has characters of
flat gain, locked gain, low noise figure, etc. and it’s an indispensable important component for DWDM system, future high
speed system and all-optical network long-distance transmission.
Product diagram
Function Note
Standard type: 1529nm~1561nm
Working wavelength Applicable to 40 wavelength(100GHz) or 80 wavelength(50GHz)DWDM system
range Extension type: 1528nm~1568nm
Applicable to 48 wavelength(100GHz) or 96 wavelength(50GHz)DWDM system
Min input optical power -30 dBm
Max output power +22dBm
Max Gain 30dB
Noise factor ＜5.5dB
Gain flatness ＜1.5dB
Secondary amplification Support built-in dual pump (optional) for signal secondary amplification
Support gain locking technology, transient control technology automatic shut-off
Unique technology
technology of output optical power
Built-in EVOA(optional);network management can adjust dynamic damping range of
EVOA function
1dB~20dB
 Support real time monitoring for EDFA port working state, including: optical power,
Network management
optical pumping, temperature, etc.
function
 Support pump shutdown threshold and automatic recovery time setting function
Optical interface LC/UPC
Max power consumption 15W

OLP: Optical Line Protection Card

OLP optical protection card launched by Sintai Communication Co., Ltd. main function is to assist the wavelength division
system to complete optical layer protection solutions such as optical line 1+1 protection and optical wavelength 1+1
protection. It can monitor the primary and backup routing optical paths in real time. In the event that the fiber core is blocked
or degraded in performance, it can implement the secure rearrangement automatically in the main and standby fiber core,
so as to guarantee optical signals in the system line to recover quickly. OLP technology is to complete the routing switch
operation in optical layer. The optical layer protection has the incomparable advantages over the protection of upper
services, and it is the best solution to provide the user with an uninterrupted communication.
Product diagram
Function Note
working wavelength range 1260nm~1650nm
Switching mechanism Selectively receipt from double transmission, and then single-ended rearrangement
Switching time ＜20ms
Introduction Tx port ＜3.8dB
loss Rx port ＜1.2dB
Monitoring of optical power
-50 dBm ~+25dBm
range
 Optical line 1+1 protection
Application scenes
 Optical wavelength 1+1 protection
Network management supports the OLP optical power real-time monitoring, active switch scheduling,
function performance management, routing management, and other management functions

MDU: 1~18 Wavelengths Multiplexing/Demultiplexing card

MDU is multiplexing/demultiplexing card based on WDM technology launched by Sintai Communication Co., Ltd. , is mainly
used in CWDM or DWDM systems to complete the multiplexing and demultiplexing functions of 1~18 optical wavelengths.
Different wavelengths of light can be multiplexed onto one fiber or multiple optical channels multiplexed in the same fiber
can be separated by wavelength. Adopting advanced optical film filtering technology, it has a series of advantages such as
low insertion loss, excellent channel consistency and high reliability. The number of channels can be customized according
to customer requirements.
Product diagram
8 channel Mux/Demux
16 channel Mux/Demux
Function Note
Optical channel number 2 4 8 16 18
Channel insertion loss ≤1.2dB ≤1.8dB ≤2.6dB ≤4.5dB ≤5.0dB

Support OTNS8600 series chassis, occupy 1 Support OTNS8600 series
Occupied slot number
slot chassis, occupy 2 slot
 CWDM: 1271nm~1611nm
Working wavelength range
 DWDM: C Band（100GHz）
Channel center wavelength ITU-T Grid
Line-side fiber number Supports single-fiber or dual-fiber application on the line side.
Flatness ≤0.5dB
Isolation ratio of adjacent channel ≥30dB
Isolation ratio of non-adjacent channel ≥45dB
Return loss ≥50dB
Directivity ≥55dB

AWG: 40 Wavelengths Multiplexing/Demultiplexing Card

AWG split-wave card launched by Sintai Communication Co., Ltd. is mainly used in the DWDM system to complete 40
optical wavelength multiplexing and demultiplexing functions in the C-band range, which can multiplex different
wavelengths of light into one. Multiple optical channels multiplexed on the same fiber are separated by wavelength on the
fiber. It is based on waveguide grating technology on silicon substrates and features a unique heatless package design for
precise channel coupling, low insertion loss, high channel isolation and high stability for 40- or 80-wave high-capacity
DWDM systems.
Product diagram
Function Note
Optical channel number 40 channel, support C band (C_EVEN), (C_ODD)
Channel spacing 0.8nm (100GHz)
Channel frequency ±12.5 GHz
Wavelength accuracy ≤0.05nm
Channel insertion loss ≤5.5dB
-1dB bandwidth ≤0.34dB
-3dB bandwidth ≤0.51dB
Adjacent channel isolation ratio ≥25dB
Non-adjacent channel isolation ratio ≥30dB
Total isolation ≥23dB
Flatness ≤1.5dB
Return loss ≥45dB
Directivity ≥50dB
Occupied slot number Support OTNS8600 series chassis，occupy 2 slot
Support C band（C_EVEN）40 channel and（C_ODD）40 channel through

Extend function
Interleaver extend to 80 channel

ITL: Interleaver
ITL (Interleaver) launched by Sintai Communications Co., Ltd. is a new type of multiplexing/demultiplexing device that uses
a cross-filtering scheme to realize two 40/48-wave (100 GHz) optical signal synthesis. An 80/96 wave (50 GHz) optical
signal simultaneously implements the inverse of the above process. ITL is completely passive, requires no temperature
control, excellent environmental stability, and meets Telcordia GR-1221-CORE requirements.
Product diagram
Function Note
Working wavelength range C band：1528nm~1568nm
Channel spacing Mux：input 100GHz/output 50GHz, Demux: input 50GHz/output 100GHz
Channel middle wavelength ITU-T Grid
Insertion loss ≤2.2dB
[email protected] ≤0.17nm
Bandwidth@25dB ≤0.7nm
Adjacent channel isolation ratio ≥22dB
Flatness ≤0.5dB
Return loss ≥40dB
Directivity ≥55dB
Dispersion ±75ps/nm
PMD 0.2ps
Occupied slot number Support OTNS8600 series chassis，occupy 1slot

TDC: Tunable Dispersion Compensator

TDC (tunable dispersion compensator) card launched by Sintai Communications Co., Ltd. is mainly used for dispersion
compensation of high-speed transmission system. It can accurately manage the residual dispersion after segmented fixed
optical compensation, and provide flexible and accurate solution for dispersion compensation. The product is independent,
transparent, safe and reliable for optical transmission signals, so as to ensure normal communication of the system. It is
suitable for high-speed, long-distance WDM transmission system
Product diagram
Product features
 Adjustable: TDC provide high precision, dynamically adjustable dispersion compensation over a wide range of
dispersion value.
 Low latency: TDC latency is less than 25ns, making it ideal for time-sensitive networks
 G.652 slope matching: TDC compensates for the dispersion slope of the fiber, providing accurate and uniform residual
dispersion for each channel of the C-band
 Multi-channel: TDC has a complete C-band coverage and can be used on 50GHz or 100GHz DWDM networks.
 Dispersion compensation range is large, and it can be selected from ±800ps/nm to ±1200ps/nm
 Optical path is transparent and does not change the optical signal
 Simple structure and convenient maintenance
Function Note
Working wavelength range C band: 1528nm~1568nm
Channel spacing 50GHz
Dispersion compensation range ±800ps/nm ±1200ps/nm
Absolute dispersion accuracy ±25ps/nm ±60s/nm
Introduction loss ＜4dB
PDL ＜0.3dB
PMD ＜1ps
Max input optical power +27dBm
Dispersion setting resolution ±10ps/nm

Support local button operation dispersion compensation range setting, with the
Button and display function
display can visually display the current status
Support real-time monitoring of TDC optical power, remote setting of dispersion
Network management function
compensation range, etc.
Occupied slot number Support OTNS8600 series chassis，occupy 1slot

DCM: Dispersion Compensation Module

The DCM dispersion compensator launched by Guangzhou Sintai Communication Co., Ltd. is a pure passive device. It can
compensate the dispersion slope of standard single-mode optical fiber (G.652) in C-band. And it is used to repair the optical
signal distorted by dispersion and compensate the damaged signal in optical transmission system, so as to improve the
performance of the transmission system and achieve high-speed, large-capacity, long-distance communication. The
dispersion range of the DCM can reach - 10 to - 2100ps/nm at 1550nm wavelength. And products with special requirements
for central wavelength and dispersion can be also provided.
Product Feature
 100% slope compensation of G.652 optical fiber in C-band
 Low insertion loss Pluggalbe Card Type
 Low polarization mode dispersion

 Wide band Dispersion Compensation for DWDM System
 Packaging and interface types can be customized
 Comply with Telcordia GR-2854-CORE standard
 Conform to RoHS-6 (lead free) 1
U Pluggalbe Rack Mout
Application Scenario
 SDH high speed optical transmission system
 DWDM optical transmission system
 G.652 Standard single-mode optical fiber long-distance and
1U Integrated Rack Mount
metropolitan area communication system
Product Specification
Item Petemeter
Equivalent G.652 compensation length 20Km 40Km 60Km 80Km 100Km 120Km
1545nm wavelength dispersion (ps/nm) -340±20 -670±30 -1000±40 -1340±50 -1670±60 -2040±60
1545nm relative dispersion slope (nm ) -1
0.004±20%
Insertion loss (dB) ≤3.5 ≤5.0 ≤6.8 ≤8.7 ≤10.7 ≤12.9
Polarization mode dispersion (ps) ≤0.5 ≤0.8 ≤1.0 ≤1.2 ≤1.3 ≤1.4
Polarization dependent loss (ps) ≤0.1 ≤0.1 ≤0.1 ≤0.1 ≤0.1 ≤0.1
Optical reflection (dB) -27

Maximum permissible input power (dBm) +23
Working temperature range -5°C~70°C
Storage temperature range -40°C~85°C
Environmental/Reliability Testing Conform to Telcordia GR-2854 and GR1221standard
Interface type LC/PC or to be customized
Pluggable chassis: 1U, (D)220mm×(W)442mm×(H)44mm
Packaging
Rack mount: 1U, (D)220mm×(W)442mm×(H)44mm
NCP: Network Control Management Card

NCP is a network management module specially designed for OTNS8600 series products by Guangzhou Sintai
Communication Co., Ltd. Its main function is to provide the interface between equipment and network management system.
With the NS2000 network management system of OTNS8600 series, NCP completes the single card management, various
maintenances and management signal transmission of network element, and realizes the real-time monitoring,
maintenance and management of equipment element and the whole synchronous equipment network. It provides a good
solution for equipment monitoring.
Product Diagram
Product Feature
 High-speed ARM processor is used to provide powerful data processing capability. It can collect the status information,
alarm events and performance parameters of each single card’s function module, and transform, process and store
them. Meanwhile, control and management information is transmitted to other functional modules of the equipment.
 Provide a Console interface to support simulation terminal operation

 Provide two RJ45 Ethernet interfaces to support IP-based graphical SNMP network management
 Provide 3 SFP interfaces to support in-band management of equipment, realize the processing of 3 optical monitoring
channels, and complete the receiving and sending of optical signals of optical monitoring channel at each station.
 The management module is hot swappable and does not affect the normal operation of current service after failure.
Function Description
Local management serial port Support a Micro-USB local management serial port
Remote management Ethernet port Supports two RJ45 Ethernet interfaces, interface rate 10/100/1000M adaptive
OSC optical monitoring port Supports three pluggable optical SFP ports with LC interface
Network management method Support CLI, Telnet, SNMP, Web and other network management methods
Exchange function Support IP communication between devices to realize integrated management
Protection function Plug out or failure of network management card will not affect existing service
Maintenance function Support local or remote software online upgrade
Reset function Support hardware reset of local NCP card by operating key
Initialization function Support initialization of local NCP card hardware by operating key
working temperature -10℃~+60℃
Working humidity 5%~95%
Number of occupied slots Support OTNS8600 full range chassis, occupying 1 slot
Maximum power consumption 5W
Default IP address of factory 192.168.1.100

OTNS2000 Network Management System

The OTNS2000 network management system launched by Guangzhou Sintai Communication Co., Ltd. is based on B/S
architecture. It supports the unified management of the whole communication network products of Sintai, and realizes the
management, maintenance and testing functions of the fault, performance, configuration and security of the whole network
system. End-to-end management function can be also provided according to user's requirements. By use of network
management system, it can improve the quality of network service, reduce maintenance costs, provide guarantee for the
rational use of network resources, and provide standard external interfaces for upper network management. It provides a
complete solution for the network management of transmission network.
Product Feature
 One-button automatic discovery: Search network devices in the process of automatic discovery, identify device
types and models, and generate panel diagrams of devices
 Comprehensive equipment management: Through the topological view, it is convenient to manage the equipment
and its configuration parameters, and supports the related operation of the equipment. It supports automatic
identification of the current device type and configuration parameters, real-time view of equipment operation.
 Visual topology management: Support tree/plane structure linkage to display network topology relationship and
divide network by various layout modes; Real-time display of equipment status with different icons in the topology;
Graphical and concrete topology form to manage equipment, equipment resources and links to reduce maintenance
difficulty and drag layout makes configuration more flexible.
 Timely fault management: multiple alarm mechanisms and self-configuring alarm thresholds can quickly locate the
alarm equipment; comprehensive collection of alarm information, timely alarm and a variety of alarm push modes to
ensure timely fault resolution, which greatly improve the efficiency of alarm processing and reduce the loss caused by
the failure.
 Detailed report statistics: with the statistical function of multiple data, statistical charts can be exported or printed for
backup or comparison; through various types of chart display, users can have a comprehensive and intuitive
understanding of the overall network. And through data analysis, the network situation can be comprehensively
understood to provide a basis for decision-making.
 Deep Control of Equipment: Each device can be configured/backed up and the software can be upgraded to reduce
the workload of administrators and improve the availability of the system. Support configuration file upgrade, backup
and recovery functions for single and batch devices; configuration management, equipment software management,
and equipment parameter management to help you reduce the workload.
 Multi-level security management: Through setting up user network and user rights, and controlling the black and
white list, we can improve network security from multi-level and multi-angle, and ensure user network security.
Network Management Interface

OTNS8600 Optical Transmission Network Subsystem
OEO Optical Amplification Subsystem

The OEO optical amplification subsystem launched by Guangzhou Sintai Co., Ltd adopts the clock and data recovery (CDR)
chip design with the highest performance and flexibility in the industry. It can perfectly realize the function of optical signal
regeneration and amplification, signal cleaning and shaping with features of highly compact structure, flexible configuration
and low power consumption. The system support the amplification of optical signals at any rate between 100M~100G with
all modes and is widely applied in the field of operators, private networks and information systems.
Product Feature
 Support the optical amplification of services at any
rates, such as SDH/SONET, POS, GE, 10GE, 40GE,
100GE and so on
 Support optical signal conversion of single mode and
multi-mode, single and dual fiber and wavelength
conversion
 1U platform supports as most 32 services amplifying  Support ALS function to extend the laser lifespan and
at rate of 155M~10G or 16 service amplifying at rate avoid the damage to humans from laser leakage
of 40G~100G  Support AC power 220V, DC power -48V, and 1+1
 Adopt modular design with flexible configuration of power input protection
each OEO function card and excellent scalability  Free of configuration installation and support plug
 Support multi-kinds of graphical interface network and play. All the optical interfaces are pluggable to
management, such as SNMP, Web reduce the spare parts cost
Function Description
Dimension 1U: 44 mm (H)×442 mm (W)×280 mm (D)
Working wavelength range Multi-mode 850nm, single mode 1260nm~1650nm，CWDM/DWDM

Supported service types STM-1/4/6/16/64/256，FE/GE/10GE/40GE/100GE
 Support the OEO (optical-electrical-optical) amplification of at most 32 routes’
services under any protocols within the rate of 155M~10G
Service access capability
 Support the OEO (optical-electrical-optical) amplification of at most 16 routes’
services under any protocols at the rate of 40G or 100G
3R function Support 3R function: re-amplifying), re-timing, re-shaping
Support laser automatic turn-off alarm function. The laser will automatically turn off the
ALS function
emission when it receives no light
Network management Support multi-kinds of graphical interface network management, such as SNMP, Web
Working temperature range -10℃~60℃
Working humidity range 5%~95% no condensation
Storage temperature -40℃~85℃
Power supply AC: 90 ~ 260V or DC: -36 ~ -72 V (support 1+1 power input backup)
Typical power consumption Full configuration <90W

EDFA Optical Amplification Subsystem

The main function of the EDFA optical amplification subsystem launched by Guangzhou Sintai Co., Ltd is to compensate
the signal’s optical power in the transmission link, which can finally extend the optical signal transmission distance. It can be
divided into BA, LA and PA based on the application scene. BA is usually used at the transmitting end to boost the output
optical power of the system. LA is usually used at the repeater section to compensate the power loss of the line. PA is
usually used at the receiving end of the system to improve the input optical power. The EDFA can amplify all the input
optical signals by using the erbium-doped fiber as the gain medium and using the 980nm or 1480nm pump laser as the
pump source with one-stage or two-stage amplification. It’s one of the most indispensable and important part of the DWDM
system, high speed transmission system and all optical network in the future.
Product Feature
 Support the unified amplification of 48CH/96CH
DWDM signal of C band
 Automatic gain control（AGC）
 Flat gain and low noise figure  Support AC power 220V, DC power -48V, and 1+1
 Support built-in VOA and automatic adjustment of power input protection
optical power  Free of configuration installation and support plug
 Support two-stage amplification with OADM or DCF and play
modules to be configured in the line  Support multi-kinds of graphical interface network
 1U pluggable rack, flexible capacity configuration management, such as SNMP, Web
Item Parameter Remark
Working wavelength range Stand type: 1529nm~1561nm, extended type: 1528nm~1568nm
EDFA type BA LA PA
Min input power (typical) -22dBm -30dBm -32dBm
Saturation output power To be customized
+20dBm +20dBm +16dBm
(typical) with max +23dBm
Rated gain (typical) 17dB 25dB 20dB To be customized
Gain flatness ≤1.5dB
Noise figure ≤5.5 dB
Equipment dimension 1U: 44 mm (H)×442 mm (W)×280 mm (D)
Support multi-kinds of graphical interface network management,
Network management Optional
such as SNMP and Web
Special technology Built-in VOA with automatic adjustment of optical power Optional
Power supply AC: 90 ~ 260V or DC: -36 ~ -72 V (1+1 power input backup)
SOA Optical Amplification Subsystem

The SOA optical amplification subsystem launched by Guangzhou Sintai Co., Ltd is a special amplification platform for low
power optical signal of 100G high-speed services in optical networks. It adopts the plug-in card type and hot-plug design
with the characteristics of high integration, low power consumption and stable output power. The system is widely used in
data link power amplification and extending transmission distance in various industries.
Product Feature
 Wavelength range: 1280nm~1330nm
 Working modes: automatic power control (APC)and
automatic gain control (AGC)
 Input power range：-17dBm~-4dBm
 High output power: saturated output optical power can
 Green and easy-to-use: configuration-free
reach +12dBm
installation, plug-and-play
 Double power protection: support AC power 220V, DC
 Unified network management platform: Support
power -48V, and 1+1 power input protection
 Flexible architecture: 1U plug-in card design, flexible multi-kinds of graphical interface network
capacity configuration management, such as SNMP, Web
Item Parameter Remark
Working wavelength range 1280nm ~ 1330nm
Input power range (total power) -17dBm ~ -4dBm
Output power range (total power) 2dBm ~ 12dBm
Gain ≥14dB
Gain flatness ≤2dB
Noise figure ≤7.5 dB
Polarization dependent gain ≤2dB
Support multi-kinds of graphical interface network management,

Network management Optional
such as SNMP and Web
System capacity 16*100G optical signal amplification 1U full load
Power supply AC: 90 ~ 260V or DC: -36 ~ -72 V (1+1 power input backup)

OLP Optical Line Protection Subsystem

The OLP optical line protection subsystem launched by Guangzhou Sintai Co., Ltd is based on the advanced development
of optical switch technology. It’s an automatic monitoring and protection system independent of communication
transmission system and completely based on the physical link of optical cable. The system can automatically switch the
signal to the optical fiber of the protection path when performance deterioration or blocking of work path is detected. In this
way, an optical communication network with high reliability, safety, flexibility and strong disaster resistance is established.
Product Feature
 Applicable to all kinds of optical communication
system
 Support line protection of dual fiber and single fiber
transmission network
 Support multiple working modes of automatic or
 Support power-off and power-on retention functions
manual switching
 OLP card and network management card are
 Supporting real-time monitoring of main and backup
independent of each other and have no influence on
routes
 Fast response: switching time<20ms each other
 Support automatic non-return and automatic return

 Support multi-kinds of graphical interface network
management, such as SNMP, Web
functions, automatic return time can be set to adapt to
 Support AC power 220V, DC power -48V, and 1+1
a variety of application scenarios
power input protection
 Support panel button operation. The system can be  1U pluggable rack mount, flexible capacity
operated by button on site without management card configuration
Item Parameter
Working wavelength range 1260nm ~ 1650nm
OLPA (dual fiber 1+1 OLPB (dual fiber 1:1 OLPA-BiDi (single fiber 1+1
OLP type
protection) protection) protection)
Switching time ＜20ms ＜40ms ＜20ms
Introduction Main path ＜5dB ＜3dB ＜5.5dB
loss Backup path ＜5dB ＜3dB ＜5.5dB
Monitoring power range -50 dBm ~+25dBm
OBP Optical Bypass Protection Subsystem

The OBP optical bypass protection subsystem (Bypass) launched by Guangzhou Sintai Communication Co., Ltd. is an
intelligent optical path switching system. It belongs to the physical layer equipment and is applied to pure optical network
environment. It can automatically identify the power supply status and optical signal output status of network nodes. When
the local optical equipment fails (including power interruption, hardware or software failures), it can instantaneously switch
to the bypass optical path, and the communication line will bypass the local equipment (i.e. the fault node), thus avoiding
the total resistance obstacle caused by the fault node and ensuring the normal system connectivity.
Product Feature
 Applicable to all kinds of gateway equipment, such as
DPI equipment, firewall, IPS, UTM, IDP, spam
gateway, anti-virus gateway, special DDos equipment,
special logic isolation equipment in all fields, etc.
 Support power-off and power-on retention function:  OBP card and network management card are
Bypass equipment’s power-off or power-on, does not independent of each other and have no influence on
affect the switching status of work routing to ensure each other
the normal operation, and has hot-swap function.  Support multi-kinds of graphical interface network
 Unique power storage function to ensure that no management, such as SNMP, Web
wrong switch occurs even when the bypass equipment  Support AC power 220V, DC power -48V, and 1+1
itself is power off. power input protection
 Automatic instantaneous switch to fault nodes without  1U pluggable rack mount, flexible capacity
human intervention, switching time < 20ms configuration
Item Parameter
Working wavelength range 850nm、1260nm ~ 1650nm
OBP type OBPA (dual fiber 1+1 protection) OBPB (dual fiber 1:1 protection)
Switching time ＜20ms ＜20ms
Introduction Cascade ＜3.5dB (typical 50%: 50% splitter) ＜1.5dB
loss Bypass ＜4.5dB (typical 50%: 50% splitter) ＜1.5dB
Monitoring power range -50 dBm ~+25dBm
Working temperature range 5%~95% no condensation

Passive Splitter Product
CWDM Mux/Demux
The CWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communications Co., Ltd. is designed for economical
and efficient multi-wavelength CWDM network applications. It is based on thin film filter (TFF) technology and operates on
ITU grids with 20nm channel spacing. The CWDM wavelength ranges from 1270 to 1610 nm, and supports at most 18
channels of optical signal multiplexing/demultiplexing. It has a series of advantages, such as multi-kind of packaging
structures, low insertion loss, high channel isolation and so on.
Product Feature
 Low insertion loss (IL)
 High channel isolation Steel tube
 High stability and reliability
 Provide 1 to 18 channels with compact design

 Conform to ITU-T G.694.2 ABS box
 Conform to Telcordia GR-1209-CORE-2001 standard
 Conform to RoHS-6 (no lead)
LGX box
Application Area
 CWDM system
 CATV system 1U rack mount
Item CWDM MUX/DEMUX
Channel number 1 2 4 8 16 18
Operating wavelength (nm) 1260~1620
Center wavelength (nm) ITU-T Grid
Channel spacing (nm) 20
Channel insertion loss (dB) ≤0.8 ≤1.2 ≤1.8 ≤2.6 ≤4.5 ≤5.0
Channel bandwidth (dB) ITU±6.5
Flatness (dB) ≤0.5
Adjacent channel isolation (dB) ≥30
Non-adjacent channel isolation (dB) ≥40
Return loss (dB) ≥50
Directivity (dB) ≥55
Polarization-dependent loss (dB) ≤0.2
Polarization mode dispersion (ps) ≤0.2
Power Handling (dB) ≤500
Operating Temperature (°C) 0~+70
Storage Temperature (°C) -40 ~+85
Package type Steel tube, ABS box, LGX standard box, 1U standard 19 inch rack
CWDM OADM
The CWDM optical add-and-drop multiplexer launched by Guangzhou Sintai Communications Co., Ltd. is specially
designed for economical and efficient multi-wavelength CWDM network applications. It is based on thin film filter (TFF)
technology and operates on ITU grids with 20nm channel spacing. The CWDM wavelength ranges from 1270nm to 1610
nm with optional ITU channel wavelength. It has a series of advantages, such as multi-kind of packaging structures, low
insertion loss, high channel isolation and is widely used in CWDM system for wavelength add-and-drop multiplexing.
Product Feature
ABS box
 High channel isolation
 Wide operating wavelength range
 Conform to ITU-T G.694.2
LGX box
Application Area
 CWDM system add-and-drop multiplexing 1U rack mount
Item CWDM OADM
Channel number 1 2 4 8 16
Channel spacing (nm) 20
Channel insertion loss (dB) ≤0.8 ≤1.2 ≤1.8 ≤2.6 ≤4.5
Input/output channel insertion loss (dB) ≤0.8 ≤1.2 ≤1.8 ≤2.6 ≤4.5
Package type ABS box, LGX standard box, 1U standard 19 inch rack
DWDM Mux/Demux
The DWDM multiplexer/demultiplexer launched by Guangzhou Sintai Communication Co., Ltd. is designed for
multi-wavelength DWDM network applications. It works on ITU grid with 100 GHz channel spacing based on thin film filter
(TFF) technology. The wavelength range of DWDM is from 1525nm to 1565 nm with optional ITU channel wavelength. It
has a series of advantages, such as multi-kind of packaging structures, low insertion loss, high channel isolation and so on.
Product Feature
 High channel isolation Steel tube

 Provide 1 to 32 channels with compact design ABS box

 Conform to RoHS-6 (no lead) LGX box
Application Area
 DWDM system 1U rack mount
Item DWDM MUX/DEMUX
Channel spacing (nm) 0.8nm(100GHz)
Package type Steel tube, ABS box, LGX standard box, 1U standard 19 inch rack
DWDM OADM
The DWDM add-and-drop multiplexer launched by Guangzhou Sintai Communication Co., Ltd. is specially designed for
multi-wavelength DWDM network applications. It works on the ITU grid with 100 GHz channel spacing based on thin film
filter (TFF) technology. The wavelength range of DWDM is from 1525nm to 1565 nm, and the wavelength of ITU channel is
optional. It has a series of advantages, such as multi-kind of packaging structures, low insertion loss, high channel isolation
and so on. And it is widely used in wavelength upstream and downstream multiplexing in DWDM systems.
Product Feature
ABS box

LGX box
Application Area
 DWDM system add-and-drop multiplexing 1U rack mount
Item DWDM OADM
Channel spacing (nm) 0.8nm(100GHz)
Input/output channel insertion loss (dB) ≤0.8 ≤1.2 ≤1.8 ≤2.6 ≤4.5
Package type ABS box, LGX standard box, 1U standard 19 inch rack
AAWG Athermal Arrayed Waveguide Grating

The AAWG athermal arrayed waveguide grating launched by Guangzhou Sintai Communication Co., Ltd. is based on
waveguide grating technology on silicon substrates. It adopts unique thermal-free package design. It can achieve accurate
channel coupling without power supply, software or temperature control. It has a series of advantages such as low insertion
loss, high channel isolation and high stability. There are Gauss type and flat top type to be optional.
Product Feature
 High stability and reliability ABS box
 Provide 40/48/80/96 channels to be used

1U rack mount
Application Area
 DWDM system
Item AAWG DWDM MUX/DEMUX
Channel spacing 50GHz 100GHz
Channel type Flat top Gauss Flat top Gauss
Channel number 80/96 40/48
Wavelength accuracy (nm) ±0.05
-1dB bandwidth (nm) >0.34 >0.24 >0.38 >0.2
-3dB bandwidth (nm) >0.51 >0.3 >0.58 >0.4
Channel insertion loss (dB) <7.0 <6.0 <5.5 <3.5
Adjacent channel isolation (dB) >26 >23 >26
Non-adjacent channel isolation (dB) >30
Total isolation (dB) >20 >21
Flatness (dB) <1.5
Return loss (dB) >40
Directivity (dB) >50
Polarization-dependent loss (dB) <0.5
Polarization mode dispersion (ps) <0.5
Operating Temperature (°C) -10~+70
Package type ABS box, 1U standard 19 inch rack

PLC Optical Splitter

The PLC optical splitter product launched by Guangzhou Sintai Communication Co., Ltd. is based on planar optical
waveguide technology. It can realize the power distribution of optical signal with 1xN or 2xN spectral ratio. It has a series of
advantages such as various packaging structures, low insertion loss, high return loss, and has excellent flatness and
uniformity in the wavelength range of 1260 to 1650 nm. Its working temperature can reach - 40 C to + 85 C and integration
degree can be customized according to demand.
Product Feature
 Low insertion loss and polarization-dependent loss
 High channel number
 Wide working wavelength range

 Wide operating temperature range
Pluggable card
Application Area
 PON network
 CATV Network 1U rack mount
 Optical network monitoring
Item 1:N PLC Splitters 2:N PLC Splitters
Port configuration 1x2 1x4 1x8 1x16 1x32 1x64 2x2 2x4 2x8 2x16 2x32 2x64
Maximum
4.0 7.2 10.4 13.6 16.8 20.5 4.5 7.6 11.1 14.3 17.6 21.3
insertion loss (dB)
Uniformity (dB) <0.6 <0.7 <0.8 <1.2 <1.5 <2.5 <1.0 <1.2 <1.5 <1.8 <2.0 <2.5
PDL (dB) <0.2 <0.2 <0.3 <0.3 <0.3 <0.3 <0.3 <0.3 <0.4 <0.4 <0.4 <0.4
WDL (dB) <0.3 <0.3 <0.3 <0.5 <0.8 <0.8 <0.4 <0.4 <0.6 <0.6 <0.8 <1.0
TDL(dB) <0.5
Return loss (dB) >55
Directivity (dB) >55
Operating
1260～1650
wavelength (nm)
Operating (°C) -40~+85
Storage (°C) -40 ~+85
Interface LC/PC or to be customized
ABS box: (D)120mm×(W)80mm×(H)18mm
Package type Pluggable rack mount: 1U, (D)220mm×(W)442mm×(H)44mm
Integrated rack mount: 1U, (D)220mm×(W)442mm×(H)44mm
Note: The above specifications do not include loss of optical fiber connectors. The test temperature is room temperature.
FBT Optical Splitter

The FBT optical splitter launched by Guangzhou Sintai Communication Co., Ltd. adopts unique materials and
manufacturing technology, which can realize the coupling of optical signals transmitted in optical fibers in the coupling area
of special structures and redistribute optical power. It supports flexible configuration according to different spectral ratios,
working wavelength, connector types and packaging forms. It is convenient for design and project planning of various
products. It is widely used for optical signal replication in cable TV transmission and other optical communication systems.
Product Feature
 Low insertion loss and polarization-dependent loss
 Wide working wavelength range
 Wide operating temperature range

Pluggable card
Application Area
 CATV Network
1U rack mount
 Optical network monitoring
Item SM FBT Splitters MM FBT Splitters
Operating wavelength (nm) 1260~1620 850
50:50 50%≤3.50 50%≤4.10
60:40 60%≤2.70 ; 40%≤4.70 60%≤3.20 ; 40%≤5.20
70:30 70%≤1.90 ; 30%≤6.00 70%≤2.50 ; 30%≤6.50
Insertion loss
80:20 80%≤1.20 ; 20%≤7.90 80%≤1.80 ; 20%≤9.00
of various
90:10 90%≤0.80 ; 10%≤11.60 90%≤1.40 ; 10%≤12.00
splitter ratio
70:15:15 70%≤1.90 ; 15%≤9.50 70%≤2.50 ; 15%≤10.50
(dB)
80:10:10 80%≤1.20 ; 10%≤11.60 80%≤1.80 ; 10%≤12.00
70:10:10:10 70%≤1.90 ; 10%≤11.60 70%≤2.50 ; 10%≤12.00
60:20:10:10 60%≤2.70 ; 20%≤7.90; 10%≤11.60 60%≤3.20 ; 20%≤9.00; 10%≤12.00
Operating Temperature (°C) -40 ~ +85
Storage Temperature (°C) -40 ~ +85

Connector LC/PC or to be customized
ABS box: (D)120mm×(W)80mm×(H)18mm
Package type Pluggable rack mount: 1U, (D)220mm×(W)442mm×(H)44mm
Integrated rack mount: 1U, (D)220mm×(W)442mm×(H)44mm
Note: The above specifications do not include loss of optical fiber connectors. The test temperature is room temperature.
Optical Transceiver
100G CFP-DCO Coherent Optical Transceiver

The 100G CFP-DCO coherent optical transceiver launched by Guangzhou Sintai Communication Co., Ltd. adopts standard
CFP package and advanced modulation mode based on DP-D/QPSK. It supports C-band full band adjustable (50/100GHz
interval) and is compatible with 100GE interface and OTU-4 interface. It aims to support single wavelength DWDM
transmission of 100Gbps and above and is suitable for various applications from data center interconnection (DCI) to
long-distance transmission
Product Feature
 DP-DQPSK modulation mode  Operating optical data rates up
 C band 50GHz ITU-T transmit to 128 Gbps
 Built-in client side and line OTN  Low latency H-FEC/SD-FEC

processing  Optimized DSP algorithm
 Compatible to OTU4 and 100GE  Transmission distance 1200km
 Compatible to OTL4.10 and CAUI  Optional ZR/MR/LH support
 Conform to CFP MSA standard  Conform to IEEE802.3ba MAC
 Hot swappable electrical packaging standard
interface  Double LC optical interface
 Working temperature: 0°C~+70°C  Power supply voltage: 3.3V
 Low power consumption: 24w  Conform to RoHS-6 (no lead)
Application Area
 Metropolitan DCI interconnection
 DWDM long-distance transmission
Item CFP-DCO ZR CFP-DCO MR CFP-DCO LH
Rate 100GE/OTU4 100GE/OTU4 100GE/OTU4
Application P2P DWDM ZR Metro DWDM Long-Haul DWDM
Dispersion-free compensation tolerance 120km 600km 1200km
10G/40G hybrid transmission √ √ √
Low latency SD-FEC √ √ √
Support C-band 96-wave (50GHz) tunable √ √ √
CAUI for 100GE host Interface √ √ √
OTL4.10 for OTU4 host interface √ √ √
Built-in OTN processing √ √ √
Interoperability with G.709 FEC √ √ √
PRBS generation and detection of Line

√ √ √
and Host Interface
Compliance with CFP MSA standard √ √ √

Optical Transceiver
Data Center High Speed Optical Transceiver

Product Name Model Wavelength Distance Interface Fiber
400G QSFP-DD SR8 100m ST-QMFS-85 850nm 100m MPO24 MMF
200G QSFP-DD SR8 100m ST-QMTS-85 850nm 100m MPO24 MMF

400G QSFP-DD SR8
200G QSFP-DD PSM8 2km ST-QSTS-31 1310nm 2km MPO24 SMF
100G QSFP28 SR4 100m ST-QMCS-85 850nm 100m MPO12 MMF
100G QSFP28 PSM4 2km ST-QSCS-31 1310nm 2km MPO12 SMF
100G QSFP28 PSM4 10km ST-QSCL-31 1310nm 10km MPO12 SMF

200G QSFP-DD PSM8
100G QSFP28 CWDM4 2km ST-QSCS-CW CWDM 2km Dual LC SMF
100G QSFP28 CWDM4 10km ST-QSCL-CW CWDM 10km Dual LC SMF
100G QSFP28 LR4 10km ST-QSCL-LW LWDM 10km Dual LC SMF
100G QSFP28 ER4 40km ST-QSCE-LW LWDM 40km Dual LC SMF

100G QSFP28 LR4
100G CFP SR10 400m ST-CMCS-85 850nm 400m MPO24 MMF
100G CFP LR4 10km ST-CSCL-LW LWDM 10km Dual LC SMF
100G CFP2 SR10 400m ST-TMCS-85 850nm 400m MPO24 MMF
100G CFP2 LR4 10km ST-TSCL-LW LWDM 10km Dual LC SMF

100G CFP2 LR4
100G CFP2 ER4 40km ST-TSCE-LW LWDM 40km Dual LC SMF
100G CFP4 SR4 100m ST-FMCS-85 850nm 100m MPO12 MMF
100G CFP4 LR4 10km ST-FSCL-LW LWDM 10km Dual LC SMF
40G QSFP+ PSM4 2km ST-QSQS-31 1310nm 2km MPO12 SMF

100G CFP4 LR4
40G QSFP+ LR4 10km ST-QSQL-CW CWDM 10km Dual LC SMF
40G QSFP+ ER4 40km ST-QSQE-CW CWDM 40km Dual LC SMF
5G Front-Haul Transmission Optical Transceiver

25G SFP28 SR 100m ST-SMVS-85 850nm 100m Dual LC MMF
25G SFP28 LR 10km ST-SSVL-31 1310nm 10km Dual LC SMF
25G SFP28 ER 40km ST-SSVE-31 1310nm 40km Dual LC SMF

25G SFP28 C&DWDM
25G SFP28 BiDi LR 10km ST-SBVL-XX 1270/1330nm 10km Single LC SMF
25G SFP28 BiDi ER 40km ST-SBVE-XX 1270/1330nm 40km Single LC SMF
25G SFP28 CWDM LR 10km ST-SCVL-XX CWDM 10km Dual LC SMF
25G SFP28 CWDM ER 40km ST-SCVE-XX CWDM 40km Dual LC SMF
25G SFP28 DWDM LR 10km ST-SDVL-XX DWDM 10km Dual LC SMF

25G SFP28 BiDi
25G SFP28 DWDM ER 40km ST-SDVE-XX DWDM 40km Dual LC SMF
Optical Transceiver
10G~16G Optical Transceiver

16G SFP+ SR 100m ST-SMUS-85 850nm 100m Dual LC MMF
16G SFP+ LR 10km ST-SSUL-31 1310nm 10km Dual LC SMF

16G SFP+ C&DWDM
16G SFP+ ER 40km ST-SSUE-55 1550nm 40km Dual LC SMF
16G SFP+ CWDM ER 40km ST-SCUE-XX CWDM 40km Dual LC SMF
16G SFP+ DWDM ER 40km ST-SCUE-XX DWDM 40km Dual LC SMF
10G SFP+ SR 300m ST-SMXS-85 850nm 300m Dual LC MMF

10G SFP+ Dual
10G SFP+ LR 10km ST-SSXL-31 1310nm 10km Dual LC SMF
10G SFP+ ER 40km ST-SSXE-55 1550nm 40km Dual LC SMF
10G SFP+ ZR 80km ST-SSXZ-55 1550nm 80km Dual LC SMF
10G SFP+ BiDi LR 10km ST-SBXL-XX 1270/1330nm 10km Single LC SMF

10G SFP+ BiDi
10G SFP+ BiDi ER 40km ST-SBXE-XX 1270/1330nm 40km Single LC SMF
10G SFP+ BiDi ZR 60km ST-SBXZ-XX 1270/1330nm 60km Single LC SMF
10G SFP+ BiDi ZR 80km ST-SBXZ-XX 1490/1550nm 80km Single LC SMF
10G SFP+ CWDM LR 10km ST-SCXL-XX CWDM 10~20km Dual LC SMF

10G SFP+ C&DWDM
10G SFP+ CWDM ER 40km ST-SCXE-XX CWDM 40km Dual LC SMF
10G SFP+ CWDM ZR 80km ST-SCXZ-XX CWDM 80km Dual LC SMF
10G SFP+ DWDM ER 40km ST-SDXE-XX DWDM 40km Dual LC SMF
10G SFP+ DWDM ZR 80km ST-SDXZ-XX DWDM 80km Dual LC SMF

10GBase-T SFP+
10GBase-T SFP+ ST-STXS - 30m RJ45
10G XFP SR 300m ST-XMXS-85 850nm 300m Dual LC MMF
10G XFP LR 10km ST-XSXL-31 1310nm 10km Dual LC SMF
10G XFP ER 40km ST-XSXE-55 1550nm 40km Dual LC SMF

10G XFP Dual
10G XFP ZR 80km ST-XSXZ-55 1550nm 80km Dual LC SMF
10G XFP BiDi LR 10km ST-XBXL-XX 1270/1330nm 10km Single LC SMF
10G XFP BiDi ER 40km ST-XBXE-XX 1270/1330nm 40km Single LC SMF
10G XFP BiDi ZR 60km ST-XBXZ-XX 1270/1330nm 60km Single LC SMF

10G XFP BiDi
10G XFP BiDi ZR 80km ST-XBXZ-XX 1490/1550nm 80km Single LC SMF
10G XFP CWDM ER 40km ST-XCXE-XX CWDM 40km Dual LC SMF
10G XFP CWDM ZR 80km ST-XCXZ-XX CWDM 80km Dual LC SMF
10G XFP DWDM ER 40km ST-XDXE-XX DWDM 40km Dual LC SMF

10G XFP C&DWDM
10G XFP DWDM ZR 80km ST-XDXZ-XX DWDM 80km Dual LC SMF
Optical Transceiver
1.25G~2.5G Optical Transceiver

1.25G SFP 850nm 550m ST-SMGS-85 850nm 550m Dual LC MMF
1.25G SFP 1310nm 2km ST-SSGS-31 1310nm 2km Dual LC SMF

1.25G&2.5G SFP Dual
1.25G SFP 1310nm 20km ST-SSGL-31 1310nm 20km Dual LC SMF
1.25G SFP 1310nm 40km ST-SSGE-31 1310nm 40km Dual LC SMF
1.25G SFP 1550nm 40km ST-SSGE-55 1550nm 40km Dual LC SMF
1.25G SFP 1550nm 80km ST-SSGZ-55 1550nm 80km Dual LC SMF
1.25G SFP 1550nm 120km ST-SSGU-55 1550nm 120km Dual LC SMF
1.25G SFP BiDi 2km ST-SBGS-XX 1310/1550nm 2km Single LC SMF
1.25G SFP BiDi 20km ST-SBGL-XX 1310/1550nm 20km Single LC SMF
1.25G SFP BiDi 40km ST-SBGE-XX 1310/1550nm 40km Single LC SMF

1.25G&2.5G SFP BiDi
1.25G SFP BiDi 40km ST-SBGE-XX 1490/1550nm 40km Single LC SMF
1.25G SFP BiDi 80km ST-SBGZ-XX 1310/1550nm 80km Single LC SMF
1.25G SFP BiDi 80km ST-SBGZ-XX 1490/1550nm 80km Single LC SMF
1.25G SFP BiDi 120km ST-SBGU-XX 1490/1550nm 120km Single LC SMF
1.25G SFP CWDM 80km ST-SCGZ-XX CWDM 80km Dual LC SMF
1.25G SFP CWDM 120km ST-SCGU-XX CWDM 120km Dual LC SMF
1.25G SFP DWDM 80km ST-SDGZ-XX DWDM 80km Dual LC SMF
1.25G SFP DWDM 120km ST-SDGU-XX DWDM 120km Dual LC SMF

1.25G&2.5G SFP C&DWDM
2.5G SFP 850nm 550m ST-SMSS-85 850nm 2km Dual LC MMF
2.5G SFP 1310nm 2km ST-SSSL-31 1310nm 10km Dual LC SMF
2.5G SFP 1310nm 20km ST-SSSE-31 1310nm 40km Dual LC SMF
2.5G SFP 1310nm 40km ST-SSSE-55 1550nm 40km Dual LC SMF
2.5G SFP 1550nm 40km ST-SSSZ-55 1550nm 80km Dual LC SMF
2.5G SFP 1550nm 80km ST-SSSU-55 1550nm 120km Dual LC SMF
2.5G SFP BiDi 20km ST-SBSL-XX 1310/1550nm 20km Single LC SMF
2.5G SFP BiDi 40km ST-SBSE-XX 1490/1550nm 40km Single LC SMF
2.5G SFP BiDi 80km ST-SBSZ-XX 1490/1550nm 80km Single LC SMF 10/100/1000Base-T SFP
2.5G SFP CWDM 40km ST-SCSE-XX CWDM 40km Dual LC SMF
2.5G SFP CWDM 80km ST-SCSZ-XX CWDM 80km Dual LC SMF
2.5G SFP DWDM 40km ST-SDSZ-XX DWDM 40km Dual LC SMF
2.5G SFP DWDM 80km ST-SDSU-XX DWDM 80km Dual LC SMF
10/100/1000Base-T SFP ST-STGS - 100m RJ45 -

Optical Transceiver
Direct Attach Cable
Direct Attach Cable (DAC)

Product Name Model Package 1 Package 2 Cable Length
400G QSFP-DD DAC ST-QDF01-DAC QSFP-DD QSFP-DD 3m
400G QSFP-DD
ST-QDF02-DAC QSFP-DD QSFP56 3m
To 2x200G QSFP56 DAC
400G QSFP-DD 400G QSFP-DD DAC

ST-QDF04-DAC QSFP-DD QSFP56 3m
To 4x100G QSFP56 DAC
400G QSFP-DD
ST-QDF08-DAC QSFP-DD SFP56 3m
To 8x50G SFP56 DAC
200G QSFP-DD DAC ST-QDT01-DAC QSFP-DD QSFP-DD 3m
200G QSFP56 DAC ST-QST01-DAC QSFP56 QSFP56 3m 200G QSFP56 DAC
200G QSFP-DD
ST-QDT04-DAC QSFP-DD QSFP28 3m
To 4x50G QSFP28 DAC
200G QSFP56
ST-QST04-DAC QSFP-DD SFP56 3m
To 4x50G SFP56 DAC
100G QSFP28 DAC
100G QSFP28 DAC ST-QSC01-DAC QSFP28 QSFP28 3m
100G QSFP28
ST-QSC04-DAC QSFP28 SFP28 3m
To 4x25G SFP28 DAC
56G QSFP+ DAC ST-QSW01-DAC QSFP+ QSFP+ 3m
50G SFP56 DAC ST-SSW01-DAC SFP56 SFP56 3m

40G QSFP28 DAC
40G QSFP+ DAC ST-QSQ01-DAC QSFP+ QSFP+ 5m
40G QSFP+
ST-QSQ04-DAC QSFP+ SFP+ 5m
To 4x10G SFP+ DAC
25G SFP28 DAC ST-SSV01-DAC SFP28 SFP28 5m

40G QSFP+ to 4x10G SFP+
10G SFP+ DAC ST-SSX01-DAC SFP+ SFP+ 5m DAC

Sintai Product Catalog

Uploaded by

Copyright:

Available Formats

Sintai Product Catalog

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Sintai Product Catalog

Uploaded by

Copyright:

Available Formats

Product Catalogue of Sintai Communication

OTNS8600 Optical Transmission Network System

OTNS8600 WDM Equipment

Product Diagram  Product features

OTNS8600 II | 2RU OTU1/2/3/4, etc. Transparent transmission reduces the

Service slot 4 slots 4 slots 8 slots 16 slots

Max channel number CWDM: 18 wavelength, DWDM: 96 wavelength（50GHz）

Single channel max rate 100Gbit/s

Working humidity range 5~95% no condensation

Storage temperature range -40℃～85℃

Heat dissipation Fan cooling

OTNS8600P Integrated DWDM Equipment

Max channel number 480G

Single channel max rate 10Gbit/s

Network level protection Support optical line 1+1 protection

Installation 19” 600mm cabinet

Working temperature range -10℃～60℃ (typical)

Working humidity range 5~95% no condensation

Storage temperature range -40℃～85℃

Heat dissipation Fan cooling

MTBF ＞100000 hours

100G OTU: 1*CFP+1*QSFP28

Relay mode Support 100G wavelength electrical relay

WDM technology Support DWDM: C band 50GHz 96 wavelengths adjustable

FEC technology Support SDFEC

Occupied slot number Support OTNS8600 series chassis, occupy 2 slots

Max power consumption 50W (including transceiver)

MTBF ＞100000 hours

40G&100G OTU: 4*QSFP28

Occupied slot number Support OTNS8600 series chassis, occupy 1 slot

Max power consumption 20W (including transceiver)

MTBF ＞100000 hours

40G&100G Muxponder: 4*SFP28↔QSFP28

MTBF ＞100000 hours

25G OTU: 8*SFP28

MTBF ＞100000 hours

10G OTU: 8*SFP+

PON OTU: 8*SFP

EDFA: Erbium-Doped Fiber Amplification Card

Max power consumption 15W

MTBF ＞100000 hours

OLP: Optical Line Protection Card

Max power consumption 5W

MTBF ＞100000 hours

MDU: 1~18 Wavelengths Multiplexing/Demultiplexing card

Channel insertion loss ≤1.2dB ≤1.8dB ≤2.6dB ≤4.5dB ≤5.0dB

Channel center wavelength ITU-T Grid

Isolation ratio of adjacent channel ≥30dB

Isolation ratio of non-adjacent channel ≥45dB

Return loss ≥50dB

Optical interface LC/UPC

Max power consumption 3W

MTBF ＞100000 hours

AWG: 40 Wavelengths Multiplexing/Demultiplexing Card

Channel spacing 0.8nm (100GHz)

Channel frequency ±12.5 GHz

Wavelength accuracy ≤0.05nm

Channel insertion loss ≤5.5dB

-1dB bandwidth ≤0.34dB

-3dB bandwidth ≤0.51dB

100G OTU: 1CFP+1QSFP28