John Deere 914p Belt Pickup With Platform Parts Catalog

A2
Full download: http://manualplace.com/download/john-deere-914p-belt-pickup-with-platform-parts-catalog/
914P BELT PICKUP PLATFORM

H59140 -UN-30JUL99

JOHN DEERE 914P’ BELT PICKUP WITH PLATFORM

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

914P BELT PICKUP PLATFORM PC2772 (30-JUL-99) 5-1

PN=1
This is the cut pages sample. Download all 54 page(s) at: ManualPlace.com
 A3 914P BELT PICKUP PLATFORM

SERIAL NUMBER PLATE

USE ALL NUMBERS, LETTERS, AND SPACES SHOWN ON THE SERIAL NUMBER PLATE IN WARRANTY
CORRESPONDENCE.

PICKUP PLATFORM (625001- )

ON THESE PLATFORMS, THE SERIAL NUMBER PLATE IS LOCATED ON THE LEFT-HAND SIDE OF THE FRAME.

EXAMPLE:
PICKUP PLATFORM

(FIRST LINE) H0 - FACTORY (HARVESTER WORKS)

0912 - PLATFORM MODEL
X - CONFIGURATION/MODEL SUFFIX
625001 - PLATFORM SEQUENCE NUMBER (SERIAL NUMBER)
(SECOND LINE) PICKUP PLATFORM - PRODUCT TYPE

NOTE: BELT PICKUPS DO NOT HAVE SERIAL NUMBERS. CHANGES TO BELT PICKUPS ARE SHOWN BY YEARS.

IMPORTANT
THIS PARTS CATALOG CONTAINS COMPLETE PARTS INFORMATION ON THE THREE-ROLLER BELT AND PICKUP
PLATFORM. IT IS IMPORTANT THAT THE CORRECT SERIAL NUMBER BE USED WHEN ORDERING PARTS.
SERIAL NUMBER LISTING INFORMATION

SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED,
FOR EXAMPLE:
- THE PART CAN BE USED ON ALL MACHINES.
000000- THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED.
-000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER
LISTED.
000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS
LISTED.

WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE
EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

COPYRIGHT (C) 2000. DEERE & COMPANY. MOLINE, ILLINOIS

ALL RIGHTS RESERVED

5-2 914P BELT PICKUP PLATFORM PC2772 (28-FEB-00)

PN=2
 A4 914P BELT PICKUP PLATFORM

DIRECTION ARROW

ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFT-
HAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS

A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A
SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS

KIT INFORMATION CAN BE FOUND IMMEDIATELY AFTER THE STORY IN WHICH IT IS USED. THE ILLUSTRATION
IS REPEATED WITH ONLY THE KIT PARTS CALLED OUTAND WITH ALL OTH ER PARTS SHOWN IN PHANTOM.

JDM REMANUFACTURED COMPONENTS

THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COM-
PONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS,
THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE
INADEQUATE OR NOT USABLE.
BOLT AND CAP SCREW STRENGTH IDENTIFICATION

BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE
IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP
SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH
QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY
THE DESCRIPTION HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS AREPROPERTY CLASS
8.8 OR LOWER.
SI UNITS OF MEASURE

METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS

THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS:

DIAL-A-SPEED™ POSI-TORQ™
DIAL-A-MATIC™ TORQ-GARD SUPREME®
HARVESTRAK™ QUIK-TATCH™

CHANGE INDICATOR LINE

CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE L. H.
MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME
PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

COMPLETE GOODS LISTINGS

COMPLETE GOODS ARE IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT
PARTS ORDER.

914P BELT PICKUP PLATFORM PC2772 (30-JUN-00) 5-3

PN=3
 A5 914P BELT PICKUP PLATFORM

SECTION INDEX

SECTION 05 - GENERAL INFORMATION

SECTION 10 - ROLLERS AND SUPPORTS

SECTION 15 - FRAME, STRIPPERS, DIVIDERS AND PLATES

SECTION 20 - HEADER HEIGHT CONTROL

SECTION 25 - AUGER AND DRIVE

SECTION 30 - HYDRAULICS

SECTION 35 - IDLERS, TIGHTENERS AND SHIELDS

SECTION 40 - BELTS, CHAINS, SHEAVES, SPROCKETS AND DECALS

SECTION 45 - NUMERICAL INDEX

5-4 914P BELT PICKUP PLATFORM PC2772 (30-JUL-99)

PN=4
John Deere 914p Belt Pickup With Platform Parts Catalog
A6
Full download: http://manualplace.com/download/john-deere-914p-belt-pickup-with-platform-parts-catalog/
914P BELT PICKUP PLATFORM
ALPHABETICAL INDEX

GRID PAGE GRID PAGE

A E

B17 ADAPTOR, BACK SHAFT - NEW HEADS TO OLD B8 EXTENSIONS, FLIGHT, AUGER .................................... 25 - 1
LEVEL LAND COMBINES............................................ 25 - 10
A23 ADAPTOR, DIAL-A-MATIC (CONVERSION TO 16-
PIN CONNECTOR) ...................................................... 20 - 2 F
A10 ARMS, FINGER HOLD-DOWN ........................................ 10 - 2
B10 AUGER ADJUSTMENT BRACKETS................................ 25 - 3 B13 FINGERS, AUGER............................................................ 25 - 6
B11 AUGER AND SHAFT ........................................................ 25 - 4 A10 FINGERS, HOLD-DOWN .................................................. 10 - 2
B13 AUGER BEARINGS .......................................................... 25 - 6 A15 FLAP, STRIPPER (132" BELT PICKUP) ........................ 15 - 1
B11 AUGER COVER ................................................................ 25 - 4 A16 FLAP, STRIPPER (154" BELT PICKUP) ........................ 15 - 2
B13 AUGER CRANK ................................................................ 25 - 6 B8 FLIGHT, AUGER, EXTENSIONS .................................... 25 - 1
B13 AUGER FINGERS ............................................................ 25 - 6 B9 FLIGHT, WINDROW SPREADER .................................... 25 - 2
B8 AUGER FLIGHT EXTENSIONS ...................................... 25 - 1 A12 FRAME, IDLER ROLLERS .............................................. 10 - 4
B11 AUGER HUB .................................................................... 25 - 4 A18 FRAME, MAIN AND RUNNERS ...................................... 15 - 4
B13 AUGER SHAFTS .............................................................. 25 - 6
B3 AUTO BELT SPEED ........................................................ 20 - 6
A22 AUTOMATIC HEIGHT CONTROL SENSOR, LINKAGE G
AND HANGER .............................................................. 20 - 1
A9 GAUGE WHEELS ............................................................ 10 - 1
A20 GRAIN SLIDE.................................................................... 15 - 6
B B9 GUSSETT, WINDROW SPREADER ................................ 25 - 2

B17 BACK SHAFT ADAPTOR - NEW HEADS TO OLD

LEVEL LAND COMBINES............................................ 25 - 10 H
A20 BACK SHEETS ................................................................ 15 - 6
B15 BACKSHAFT .................................................................... 25 - 8 A22 HANGER, AUTOMATIC HEIGHT CONTROL .................. 20 - 1
B13 BEARINGS, AUGER ........................................................ 25 - 6 A24 HEADER HEIGHT CONTROL SHAFT, BEARINGS
A24 BEARINGS, HEADER HEIGHT CONTROL AND BRACKETS (685056- ) ................................ 20 - 3
(685056- ) .............................................................. 20 - 3 B1 HEADER HEIGHT CONTROL WIRING HARNESS ........ 20 - 4
A13 BEARINGS,CENTER AND IDLER ROLLERS DRIVE .... 10 - 5 A10 HOLD-DOWN FINGERS .................................................. 10 - 2
B3 BELT SPEED, AUTO ........................................................ 20 - 6 B22 HOSES, HYDRAULIC ...................................................... 30 - 2
A17 BELTS AND FINGERS .................................................... 15 - 3 A13 HOUSINGS, BEARINGS, IDLER DRIVE ROLLER.......... 10 - 5
A20 BOTTOM SHEET .............................................................. 15 - 6 B11 HUB, AUGER .................................................................... 25 - 4
B21 BRACKET, HYDRAULIC LINES ...................................... 30 - 1 B21 HYDRAULIC LINES AND BRACKET .............................. 30 - 1
B24 BRACKET, HYDRAULIC MOTOR .................................... 30 - 4 B22 HYDRAULIC LINES AND HOSES .................................. 30 - 2
B10 BRACKETS, AUGER ADJUSTMENT .............................. 25 - 3 B24 HYDRAULIC MOTOR COUPLER .................................... 30 - 4
A24 BRACKETS, HEADER HEIGHT CONTROL B24 HYDRAULIC MOTOR MOUNTING BRACKET ................ 30 - 4
(685056- ) .............................................................. 20 - 3

I
C
A12 IDLER ROLLERS .............................................................. 10 - 4
B19 CABLE, STORAGE, POWER SHAFT .............................. 25 - 12
A12 CENTER DRIVE................................................................ 10 - 4
C4 CHAIN, DRIVE, ON R.H. SIDE ........................................ 40 - 1 L
B21 COUPLER, BRACKET, HYDRAULIC LINES .................. 30 - 1
B24 COUPLER, HYDRAULIC MOTOR.................................... 30 - 4 B5 LIGHTS, MARKER ............................................................ 20 - 8
B11 COVER, AUGER .............................................................. 25 - 4 B6 LIGHTS, STUBBLE .......................................................... 20 - 9
B13 CRANK, AUGER .............................................................. 25 - 6 B21 LINES, HYDRAULIC ........................................................ 30 - 1
B22 LINES, HYDRAULIC ........................................................ 30 - 2
A22 LINKAGE, AUTOMATIC HEIGHT CONTROL.................. 20 - 1
D

C5 DECALS (685151- ) .................................................. 40 - 2 M

A23 DIAL-A-MATIC SENSING BOX (FOR CONVERSION
TO 16-PIN CONNECTOR) .......................................... 20 - 2 B18 MAIN DRIVE SHAFT ........................................................ 25 - 11
B1 DIAL-A-MATIC WIRING HARNESS ................................ 20 - 4 A18 MAIN FRAME AND RUNNERS........................................ 15 - 4
B1 DIAL-A-MATIC, HEADER HEIGHT CONTROL................ 20 - 4 B5 MARKER LIGHTS ............................................................ 20 - 8
B1 DIAL-A-SPEED CONTROL .............................................. 20 - 4 B24 MOTOR, COUPLER.......................................................... 30 - 4
C4 DRIVE CHAIN ON RIGHT-HAND SIDE .......................... 40 - 1 B24 MOTOR, MOUNTING BRACKET .................................... 30 - 4
B18 DRIVE SHAFT, MAIN ...................................................... 25 - 11 B23 MOTOR, REEL (EATON).................................................. 30 - 3
A12 DRIVE, CENTER .............................................................. 10 - 4 A23 MOUNTING, SENSING BOX, DIAL-A-MATIC (FOR
CONVERSION TO 16-PIN CONNECTOR).................. 20 - 2

914P BELT PICKUP PLATFORM PC2772 (30-JUN-00) 5-5

PN=5
This is the cut pages sample. Download all 54 page(s) at: ManualPlace.com