Technical Information

Memosens measuring cable and installation

accessories
CYK10 / CYK11

Application Your benefits

Measuring cable for all Memosens sensors and sensors with • Memosens data cable CYK10
Memosens technology for nearly all parts of process – Absolute waterproof connection (ingress protection IP 68)
engineering. – No corrosion of contacts
• The Memosens data cable CYK10 is used with sensors – No influence of interfering potentials thanks to galvanic
utilizing the contactless inductive signal transmission. isolation of transmitter and medium
• The Memosens extension cable CYK11 is used for the
• Memosens extension cable CYK11
connection of digital fixed-cable sensors with Memosens
– Absolute waterproof connection (ingress protection IP 68)
protocol. The following versions are available: Ferrule with
– Flexible and fast in application
ferrule, M12 female connector with ferrule and M12 female
connector with M12 plug. CYK10 based installations can
also be extended with CYK11.
• CYK10 and CYK11 can be extended with junction boxes.
• CYK10 available in versions for use in hazardous areas

TI00118C/07/EN/13.11
71139045
 CYK10/CYK11

Function and system design

Measuring system

a0018829

Measuring system

1 Transmitter
2 Memosens extension cable CYK11 (optional)
3 Junction box (optional)
4 Memosens data cable CYK10 or fixed cable
5 Sensor

Memosens Memosens makes your measuring point safer and more reliable:
• Non-contact, digital signal transmission enables optimum galvanic isolation
• No contact corrosion
• Completely watertight
• Laboratory sensor calibration possible, thus increasing measured value availability
• Predictive maintenance thanks to recording of sensor data, e.g.:
– Total hours of operation
– Hours of operation with very high or very low measured values
– Hours of operation with high temperatures
– Number of steam sterilizations
– Sensor condition

a0013430

2 Endress+Hauser
CYK10/CYK11

Connection in explo-
sion-hazardous areas

a0018789

Connection in explosion-hazardous areas

It is not allowed to use CYK11 as an extension for CYK10-based measuring system in hazardous areas.
For hazardous areas it is recommended to use continuous and not extended Memosens measuring cable
CYK10.

Endress+Hauser 3
 CYK10/CYK11

Cable specification
CYK10 CYK11
Conductor/Construction 4 cores 6 cores
Outer diameter (mm) 6,3 6,3
Shielding Yes Yes
Bending radius solid 5xD 5xD
Bending radius flexible 10xD 10xD

Performance characteristics
Resistance CYK10 CYK11
UV resistant Yes Yes
Clear of ozon-depleting substances Yes Yes
Halogen-free No Yes
RoHs-compliant Yes Yes
Flame-resistant Yes Yes
Oil-resistant - Yes

Environment
Ambient temperature range CYK10 CYK11
Temperature min. -25 °C (-13 °F) -30 °C (-22 °F)
Temperature max. 135 °C (277 °F) 90 °C (194 °F)

Degree of protection • Memosens data cable CYK10: IP 68 (Memosens: 1 bar (15 psi), 25 °C (77 °F), 1 mol/l KCl, 45 days;
M12: 0.1 bar (2 psi), 50 °C (131 °F), 3 mol/l KCl, 30 days)
• Memosens extension cable CYK11: IP 68 (M12: 0.1 bar (2 psi), 50 °C (131 °F), 3 mol/l KCl, 30 days)
in mated condition

Mechanical construction: Measuring cable for digital

sensors
CYK10 for digital sensors with
Memosens technology

a0003350

Instead of GY you can also ground over the cable clamp in the transmitter.
CYK10 with M12 plug

a0016912

4 Endress+Hauser
CYK10/CYK11

CYK11 CYK11 with ferrules

a0015715-en

CYK11 with ferrule and M12 female connector

a0015716-en

CYK11 with M12 plug and M12 female connector

a0016506-en

Assignment M12 plug

1 VFixed cable sensor (+24 V) (PK)
2 GNDFixed cable sensor (GY)
3 VMemosens sensor(BN)
4 GNDMemosens sensor (WH)
5 RS 485 A (GN)
6 RS 485 B (YE)

a0016913

Material CYK10 and CYK11 CYK10 CYK11

Cable sheath TPE TPE

Endress+Hauser 5
 CYK10/CYK11

Mechanical construction: Plug and junction box

CYK11 junction box

a0016200

Variants of CYK11 junction box

A Junction box M12 connector/cable
B Junction box cable/cable

Material Junction box: aluminum

Certificates and approvals

4 mark Declaration of Conformity
The product meets the requirements of harmonized European standards.It therefore meets the legal
specifications of EU guidelines.The manufacturer confirms that the product has been successfully tested by
applying the 4 mark.

Ex approval CYK10-G**a, a = 1, 2
CYK10-I**a, a = 1, 2
• IECEx
Ex ia IIC T3/T4/T6 Ga
• ATEX
II 1G Ex ia IIC T3/T4/T6 Ga
• FM/CSA
IS/NI CLI Div1&2 GP ABCD
• Nepsi
II 1G Ex ia IIC T3/T4/T6 Ga

6 Endress+Hauser
CYK10/CYK11

Ordering information
Product structure You can create a valid and complete order code using the Endress + Hauser Configurator tool on the Internet.
Enter the following addresses in your browser to access the relevant product page:
www.products.endress.com/cyk10
www.products.endress.com/cyk11
1. The following options are available on the right-hand side of the page:

2. Select "Configure this product".

3. A new window opens with the Configurator. Using this tool, you can configure your device and you will
receive a valid and complete order code for this.
4. Then export the order code as a PDF or as an Excel file selecting from the buttons provided at the top of
the page.

Junction box Junction box M12 connector/cable

• Material: aluminum, painted
• Cable extension: Memosens sensors, Liquiline
• Order no. 71145498
Junction box cable/cable
• Material: aluminum, painted
• Cable extension: Memosens sensors, Liquiline
• Order no. 71145499

Endress+Hauser 7
TI00118C/07/EN/13.11
71139045