Industrial

Solutions
brands you trust.

Product Overview
 Industrial Pump Applications

Crane Pumps & Systems design’s the most efficient and economical pumps
to serve the large diversity of industrial applications in the market.

Servicing a wide range of applications including: marine, oil and gas, light
manufacturing, zoos, recreation parks and heavy industrial.

Our product line includes:

• Demersible® Solids Handling
• Dewatering
• End Suction (Frame Mounted / Close Coupled)
• Inline Vertical
• Non-Clog - Dry Pit
• Regenerative Turbine
• Self-Primers
• Split Case
• Sump Industrial
• Vertical Multistage
• Vertical Process

CP&S industrial pumps deliver a rich legacy of heavy duty, long-lasting

performance. Many of these pumps are 30 years or older and are still
carrying out their work in a multitude of industrial applications.

2
Centrifugal Pumps
Engineered pumps for a variety of light to heavy-duty wastewater
applications such as unscreened raw sewage or industrial waste. page 4

Solids Handling Pumps

Submersible non-clog pumps constructed of durable cast iron for
sewage, effluent, wastewater processing and solids laden media. page 7

End Suction Pumps

General purpose pumps configured for heavy duty service
for liquid ranging from water and light hydrocarbons to heavy slurries. page 7

Vertical Pumps
Pumps designed for industrial applications requiring water and
other heat transfer liquid to be transported at high pressures. page 8

Regenerative Turbine Pumps

Uniquely designed turbine pumps engineered for high
pressure, low flow applications. page 10

Dewatering Pumps
Pumps manufactured to remove unwanted water
from any area with high efficiency. page 11

Condensate Return Units

Designed for automatic return of hot water condensation from
radiators, coils etc. to low and high pressure boilers. page 11

3
 Industrial Products

Deming Split Case Centrifugal Pumps

Centrifugal

Model 5060 Series

Pumps

No. of Sizes 30 Applications:

Flow Capacity 7,000 gpm – – Air Wash Applications
Heads to: 500’ – – Booster Services
Discharge Sizes 1.5” - 12” – – Building Services
– – Chemical Plants
Features: – – Condenser Cooling
• Cast iron and bored bearing supports – – General Water Supply
• Standard casing wear rings – – Industrial Services
• Enclosed, double suction impellers – – Power Plants
• High strength shaft with renewable
shaft sleeves
• Standard bronze fitted and iron materials

Weinman Split Case Centrifugal Pumps

Model 1100 & 1200 Series
No. of Sizes 27 Applications:
Flow Capacity 6,000 gpm – – Boiler Feed Services
Heads to: 450’ – – Cooling Tower
Discharge Sizes 2” - 12” – – General Servicing
Plumbing
Features: – – Hot or Chilled Water
• Provides higher efficiency and longer Circulation
pump life at lower costs – – Portable Water
• Extra heavy castings absorb vibration Transmission &
and hydraulic noise
Treatment
• Standard are bronze fitted with iron cases
• Optional ductile versions available for 450 psi – – Pressure Boosting
• “V” trough base design for water collection

4
 Crown Self Priming Centrifugal Pumps

Centrifugal
Model PO

Pumps
Applications: Flow Capacity 2,750 gpm
–– Raw Water Heads to: 140’
–– Wastewater Discharge Sizes 2” - 10”
–– Barge Stripping Max Solids 3”

Features:
• Cast iron construction
• Two vane, ductile iron open impeller
• High carbon steel shaft
• Corrosion resistant hardware
• Single mechanical seal
• Grease lubricated - Buna/Carbon/Ceramic

Additional Options:
• Double mechanical seals
• Oil lubricated seals
• V-belt for base mounting

Barnes Self Priming Centrifugal Pumps

Model CCE
Applications: Flow Capacity 4,400 gpm
–– Raw Water Heads to: 184’
–– Wastewater Discharge Sizes 1.5” - 10”
–– Barge Stripping Max Solids 3”
Continuous Media
160°F
Temperature

Features:
• ABS approved
• Fast priming
• Self priming to 20 ft.
• Back pull out on some models
• Heavy duty shafts for durability
• Available in frame mounted and close
coupled

Benefits:
Power frames are completely sealed
against contaminants, and bearings are
grease lubricated, thus reducing long term
maintenance and operating costs of the pump.

5
 Industrial Products

Deming Inline Centrifugal Pumps

Centrifugal

Model 3180 Series

Pumps

No. of Sizes 1 Applications:

Flow Capacity 1,200 gpm – – Brine
Heads to: 390’ – – Chemicals
Discharge Sizes 1” - 4” – – Corrosive Fluids
HP .50 - 50 – – Gasoline
RPM 1750 or 3450

Features:
• Heavy one-piece casing with
flanged suction
• Fully enclosed impeller with
optional replacement wear ring
• Renewable hook type shaft sleeve
products
• Top pull-out, rotating assembly
• Dual purpose jack screws
• Stuffing box cover
• Standard: iron, bronze fitted,
ductile iron and stainless

Barnes Centrifugal Grinder Pumps

Model SGV Series
Flow Capacity 106 gpm Applications:
Heads to: 160’ – – Wastewater
Discharge Sizes 1.25” - 2”
HP 2, 3, 5, 7.5

Features:
• Exclusive Slicerator grinder
• Robust 3-bearing shaft design
• Recessed cast iron vortex impeller
• Quick-connect power cord
• Double mechanical seals
• Oil-filled motor for outstanding cooling

6
 Deming Demersible Non-Clog Pumps
Model 3180 Series
Applications: Flow Capacity 3,250 gpm
–– General Drainage Heads to: 250’
–– Storm Water Run-off Discharge Sizes 3”, 4”, 6”, 8”
–– Waste Treatment Plants Max Solids 3”
–– Building Services Liquid Temperature 104°F Continuous

Solids Handling
–– Power & Utility Plants

Pumps
–– Pollution Control Features:
• Self lubricated for simplified maintenance
• Slide rail or stand alone installation
• Large lifting bail for easy cord retrieval
• Control panel for seal chamber maintenance
• Slotted discharge connection
• Easy retrofit to ANSI and ISO pipe flanges

End Suction
• X-Pruf® construction

Pumps
Construction Details: Vortex or Enclosed
• Impeller - Enclosed Dual Vane or
Enclosed Monovane
• Motor - Inverter Duty Rated motors per
NEMA MG1 Part 31 for VFD operation
• Shaft Hardware - Corrosion resistant
stainless steel
• Discharge Flange - Cast iron, 125lb.
• Power Cord - Horizontal flange slotted
to accommodate ANSI or ISO flanges.
CSA qualified submersible power
cable 200V.

Weinman Back Pull Out End Suction Pumps

Model 375 & 575 Series
Applications: Flow Capacity 4,000 gpm
–– Commercial Heads to: 400’
–– HVAC Discharge Sizes Up to 8”
–– Hot water systems
–– Industrial processes Features:
–– Drinking water • Back Pull Out design allows the pump to be
serviced without disturbing the existing
motor or installed piping
• Efficient design with wide bulls-eye and
low run out horsepower
• Industry leading two week lead-time
• Self-venting tangential discharge
eliminates air entrapment in the pump case
• Steel base with bolt on motor risers. The
pump leaves the factory laser aligned,
which assures that the unit can be aligned
in the field without bolt bind
• Self-flushing mechanical seal, external
piping not required
• CSA and NSF/ANSI 372 certified

7
 Industrial Products

Deming End Suction Pumps

Model 3000 Series
Flow Capacity 4,000 gpm Applications:
Heads to: 780’ – – Air Conditioning
Discharge Sizes up to 6” – – Booster Services
– – Building Services
Features: – – Chemical Services
• Hydraulically balanced, computer- – – Coolants
designed enclosed impeller – – Cooling Tower
• Maximum interchangeability of parts – – General Water Supply
• Rugged, one-piece casing for suction head
and casting – – Industrial Services
• Back pull out design for ease of – – Irrigation
maintenance and regreaseable bearings – – Pollution Control
• Provide continuous service with essentially – – Recirculation
no maintenance
End Suction

– – Washer Lines
• Compact design
Pumps
Vertical
Pumps

Deming Vertical Sump Pumps

Model 4500 Series
No. of Sizes 20 Applications:
Flow Capacity 4,000 gpm – – Condensate Return
Heads to: 250’ – – Corrosive &
Discharge Sizes 1.5” - 10” Non-Corrosive Liquids
Sump Depth 20’ maximum – – Dewatering Services
– – Industrial Processes
Continuous
400°F – – Industrial Sump
Temperature
Drainage
– – Pollution Control

Features: Design:
• Full weight pipe with welded flanges • Semi-open, high
• Registered fit assembly points for efficiency impellers
positive alignment • Single volute: standard
• Axial clearance of impeller through 2” discharge
• High thrust ball bearing contained • Double volute:
in seal housing standard from 3”
• Seal housed in a heavy one-piece discharge and larger
support frame
• Standard all iron with options for
bronze fitted, all bronze and stainless steel

8
 Deming Vertical Solids Handling Pumps
Model 7560 Series
No. of Sizes 25
Applications:
–– Cannery & Meat Flow Capacity 8,000 gpm
Process Wastes Heads to: 250’
–– Industrial Wastes Discharge Sizes 2” - 12”
–– Pollution Control Solids Capacity 1.5” - 6”
–– Process Wastes
–– Sanitary Wastes Features:
–– Storm Water • Enclosed two-port impeller
• Easy axial adjustment
• Flanged column construction
• Stainless steel pump shaft
• Vapor-tight cover plate
• Heavy duty ball thrust bearing
• Flexible motor coupling
• Vertical NEMA C-Flange motors
• Float control options
• Simplex and duplex units
• Sealed thrust bearing housing

Vertical
Pumps
Deming Vertical Process Pumps
Model 4310-11 Series
Applications: Flow Capacity 500 gpm
–– Air Conditioning/ Heads to: 100’
Washers Discharge Sizes 1” - 3”
–– Circulation HP .25 - 7.5
–– Coolants
–– Filtering
Model 5560 Series
–– Metal and parts
Flow Capacity 3,600 gpm
Washing
Heads to: 150’
–– Paint Systems
–– Plating Discharge Sizes 1” - 10”
–– Pickling HP 1 - 75

Features:
• Vertically split, end suction design
• Double volute on pumps with greater than
3” discharge
• Semi-open type impellers with heavy vanes
• One piece cast iron, precision bored
• High shaft strength for maximum loads
with minimum deflection
• Throttle bushing
• Precision ball bearings
9
 Industrial Products

Burks Regenerative Turbine Pumps

Model EC & ED Series
Capacity Range 3.6 - 35.3 gpm Applications:
Heads to: 350’ – – Feed/Transfer
RPM 1750 – – High-Temperature Water or
Standard Bronze Oil Heat Transfer
Construction Fitted, All Bronze – – Boiler Feed & Condensate
or Stainless Steel Return Circulation
Shaft Seal
Mechanical or – – Hot & Cold Water Circulation
Stuffing Box – – Brine Recirculation
– – Hydraulic Oil Circulation
Model CR Series – – Metering
Capacity Range 2.8 - 4.3 gpm – – Additive Metering
Heads to: 200’ – – Hot Water Spray
Burks
RPM CR Pumps
3450
HP Range 1/3
Construction All Bronze
Shaft Seal Mechanical

Model CS Series
Capacity Range 7.1 - 32.5 gpm
Heads to: 350’
RPM 3450
HP Range 1-5
Standard Bronze
Construction Fitted, All Bronze
Burks CS Pumps or Stainless steel
Turbine Pumps
Regenerative

Mechanical or
Shaft Seal
Stuffing Box

Features:
• Raceway sealing grooves
• Annular grooves on impeller
• Jockey pumps
• Pressure booster
• Life-Lok® external adjustment
• Standard bronze fitted
• All bronze material

10
 Prosser Standard Line Submersible Pumps
Models ACV, ADV, AEV, AFV
Applications: No. of Sizes 130
–– Dewatering of building sites & pipe lines Flow Capacity 1,400 gpm
–– Flood Control Dams Heads to: 210’
–– Tunnels Discharge Sizes 2” - 6”
–– Open Pit Dewatering HP .75 - 50
–– Gravel Pits, Quarries & Open Pit Mining
Features:
• Slim-line design
Additional Options: • Light weight for easy portability
• NEMA 3R Enclosure - • Requires no priming, suction hose or
3PH Voltage Only foot valve
• Liquid level controls • Operates in any position
• Series • Ability to run dry for a reasonable
• Adapter kits period of time without damage
• Inline design for cool-running motors
• NEMA 4 rated watertight enclosure for
environmental protection

Weinman Condensate Return Units

Models ACV, ADV, AEV, AFV
Applications: Flow Capacity 225 gpm
–– Condensate Return Heads to: 300’
Boiler Feed Systems Discharge Sizes 1” - 2”
HP .33 - 15
RPM 1750 or 3450
Continuous
200°F
Temperature

Features:
Dewatering
• Water gauge

Pumps
• Drip proof motors
• Steel venting piping
• Mechanical seal
• Bronze impeller
• Top pull out without disturbing piping
• Float switches or alternators
Return Units
Condensate

Additional Options:
• Cast iron receivers standard to 67 gallons
• Steel receivers standard to 150 gallons
• Larger receiver sizes available
• Motor controls mounted and pre-wired
• Isolation valves between receiver and
pump flanges are available
11
  2014 Crane Pumps & Systems, Inc.
A Crane Co. Company A Crane Co. Company
Printed in U.S.A.
INDFULLBRO - Rev. B (3/14)
Crane Pumps & Systems Crane Pumps & Systems Canada
420 Third Street 83 West Drive
Piqua, Ohio 45356 Brampton, Ont. Canada L6T 2J6
(937) 778-8947 (905) 457-6223
Fax (937) 773-7157 Fax (905) 457-2650
www.cranepumps.com

brands you trust.