Scribd Logo
Upload

Welcome to Scribd!

  • 108 views

    Ribbed Slab Design-1

    Uploaded by

    HAITHAM ALI
    This document summarizes the design of a ribbed slab with a specified concrete compressive strength (fc') of 30 MPa. The slab was analyzed for a service dead load of 11.8 kN/m^2, service live load of 5 kN/m^2, and ultimate load of 25.02 kN/m^2. Reinforcement was designed for positive and negative bending moments, with required reinforcement areas of 285 mm^2 and 1164 mm^2 meeting the design demands. Shear design found the concrete shear capacity of 41.7 kN to be sufficient without requiring shear reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Ribbed Slab Design-1

    Uploaded by

    HAITHAM ALI
    108 views2 pages
    This document summarizes the design of a ribbed slab with a specified concrete compressive strength (fc') of 30 MPa. The slab was analyzed for a service dead load of 11.8 kN/m^2, service live load of 5 kN/m^2, and ultimate load of 25.02 kN/m^2. Reinforcement was designed for positive and negative bending moments, with required reinforcement areas of 285 mm^2 and 1164 mm^2 meeting the design demands. Shear design found the concrete shear capacity of 41.7 kN to be sufficient without requiring shear reinforcement.

    Original Title

    RIBBED SLAB DESIGN-1

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the design of a ribbed slab with a specified concrete compressive strength (fc') of 30 MPa. The slab was analyzed for a service dead load of 11.8 kN/m^2, service live load of 5 kN/m^2, and ultimate load of 25.02 kN/m^2. Reinforcement was designed for positive and negative bending moments, with required reinforcement areas of 285 mm^2 and 1164 mm^2 meeting the design demands. Shear design found the concrete shear capacity of 41.7 kN to be sufficient without requiring shear reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    108 views2 pages

    Ribbed Slab Design-1

    Uploaded by

    HAITHAM ALI
    This document summarizes the design of a ribbed slab with a specified concrete compressive strength (fc') of 30 MPa. The slab was analyzed for a service dead load of 11.8 kN/m^2, service live load of 5 kN/m^2, and ultimate load of 25.02 kN/m^2. Reinforcement was designed for positive and negative bending moments, with required reinforcement areas of 285 mm^2 and 1164 mm^2 meeting the design demands. Shear design found the concrete shear capacity of 41.7 kN to be sufficient without requiring shear reinforcement.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    DESIGN OF RIBBED SLAB PROJECT No.

    : J10-10400 SITE - PT11 B1101

    Rib Type : J1
    fc' = 30 MPa fy = 415 MPa Es = 200 000 MPa
    rMIN= 0.0034 rBAL= 0.03087 rMAX = 0.0232 b1 = 0.85
    Concrete Cover = 30 mm Stirrups Diameter = 8 mm
    Ec = 4700 (fc' )1/2 = 25 743 MPa Es/Ec= 7.7691 fr = 0.7 (fc' )1/2 = 3.83 MPa
    WEB WIDTH TOTALD SLAB FLANGE CLEAR SPAC- LOADED
    min max slope EPTH THICK. WIDTH SPAN ING WIDTH
    mm 150 150.6 1/999 370 70 550 4775 400 550
    Analysis Results:
    Straining Actions (Calcuate or Input) = C Calculate Assuming Equal Spans
    Continuity Condition (1,2,3,4) = 2 2-Spans Effective Span= 5013.8 mm
    SERVICE DEAD LOAD = 11.8 KN/m2 Mu (+ve) MID SPAN = 31.45 KN.m
    SERVICE LIVE LOAD = 5 KN/m2 Mu(-ve) INTERIOR SUPPORT= 38.44 KN.m
    ULTIMATE LOAD = 25.02 KN/m2 Mu (-ve) EXTERIOR SUPPORT= 10.48 KN.m
    Qu INTERIOR SUPPORT = 39.67 KN
    NOT APPLICABLE 0.00 KN.m 0.00 KN.m 0.00 KN
    0.00 KN.m
    Design of T - Section(+ve M):
    As (max) = 0.75(Asf+Asw) = 2421.78 mm2 amax = 76.06 mm ds max= 45 mm
    As req = 284.65 mm2
    Chosen Reinforcement : Num f Num f AS
    AS.BOT 2 14 0 0 308 mm2 no. of layers= 1

    EFFECTIVE MAX. STEEL AREA MAX CAPACITY APPLIED MOM. SECTION


    DEPTH mm (As) mm2 FMn max KN.m Mu KN.m STRNGTH KN.m
    325 2421.78 261.52 31.45 36.86
    SAFE

    Design of Tapered Rectangular Section (-ve M):


    SEC 1:As req = 324.20 mm2 SEC 2:As req = 84.95 mm2 no. of layers= 1
    Chosen Reinforcement : Num f AS Num f AS
    SEC 1 3 12 339.43 mm2 SEC 2 2 10 157.14 mm2

    MAX. STEEL MAX CAPACITY SECTION 1 SECTION 2


    EFFECTIVE
    AREA (As) FMn max APPLIED MOM. SECTION APPLIED MOM. SECTION
    DEPTH mm KN.m
    mm2 Mu KN.m STRNGTH KN.m Mu KN.m STRNGTH KN.m
    335.00 1163.57 118.17 38.44 40.24 10.48 19.39
    SEC 1: SAFE SEC 2: SAFE

    Design For Shear


    vc = 1.1 (fc')1/2/6 = 1.0042 Mpa vs max = (2/3) (fc')1/2 = 3.6515 Mpa Aw = 48856 mm2
    fy APPLIED SHEAR CONCRETE SHEAR SHEAR BY RFT. DESIGN SHEAR MAX. SPACING SHEAR RFT.
    Mpa Vu KN FVc KN FVs KN RFT. mm2/mm mm F S Av/S
    400 39.67 KN.m 41.70 0.00 0.0000 0.00 8 200 0.5029
    SAFE
    ZUHAIR FAYEZ PARTNERSHIP Project No.
    DESIGN CALCULATION Date May-23
    Sheet No.
    Project Designed By KHT
    Subject DESIGN OF RIBBED SLAB Checked By MAWA

    Rib Type : J1
    fc' = 30 MPa fy = 415 MPa Es = 200 000 MPa
    rMIN= 0.0034 rBAL= 0.03087 rMAX = 0.0232 b1 = 0.85
    Concrete Cover = 30 mm Stirrups Diameter = 8 mm
    Ec = 4700 (fc' )1/2 = 25 743 MPa Es/Ec= 7.7691 fr = 0.7 (fc' )1/2 = 3.83 MPa
    WEB WIDTH TOTAL SLAB FLANGE CLEAR SPAC- LOADED
    min max slope DEPTH THICK. WIDTH SPAN ING WIDTH
    mm 150 150.6 1/999 370 70 550 4775 400 550

    Analysis Results:
    Straining Actions (Calcuate or Input) = C Calculate Assuming Equal Spans
    Continuity Condition (1,2,3,4) = 2 2-Spans Effective Span= 5014 mm
    SERVICE DEAD LOAD = 11.8 KN/m2 Mu (+ve) MID SPAN = 31.45 KN.m
    SERVICE LIVE LOAD = 5 KN/m2 Mu(-ve) INTERIOR SUPPORT= 38.44 KN.m
    ULTIMATE LOAD = 25.02 KN/m2 Mu (-ve) EXTERIOR SUPPORT= 10.48 KN.m
    Qu INTERIOR SUPPORT = 39.67 KN
    NOT APPLICABLE 0.00 KN.m 0.00 KN.m 0.00 KN
    0.00 KN.m
    Design of T - Section(+ve M):
    As (max) = 0.75(Asf+Asw) = 2422 mm2 amax = 76.06 mm ds max= 45 mm
    As req = 285 mm2
    Chosen Reinforcement : Num f Num f AS
    AS.BOT 2 14 0 0 308 mm2 no. of layers= 1

    EFFECTIVE MAX. STEEL AREA MAX CAPACITY APPLIED MOM. SECTION


    DEPTH mm (As) mm2 FMn max KN.m Mu KN.m STRNGTH KN.m
    325 2422 261.52 31.45 36.86
    SAFE

    Design of Tapered Rectangular Section (-ve M):


    SEC 1:As req = 324.20 mm2 SEC 2:As req = 84.95 mm2 no. of layers= 1
    Chosen Reinforcement : Num f AS Num f AS
    SEC 1 3 12 339.43 mm2 SEC 2 2 10 157.14 mm2

    MAX. STEEL MAX CAPACITY SECTION 1 SECTION 2


    EFFECTIVE
    AREA (As) FMn max APPLIED MOM. SECTION APPLIED MOM. SECTION
    DEPTH mm KN.m
    mm2 Mu KN.m STRNGTH KN.m Mu KN.m STRNGTH KN.m
    335.00 1164 118.17 38.44 40.24 10.48 19.39
    SEC 1: SAFE SEC 2: SAFE

    Design For Shear


    vc = 1.1 (fc')1/2/6 = 1.0042 Mpa vs max = (2/3) (fc')1/2 = 3.6515 Mpa Aw = 48856 mm2
    fy APPLIED SHEAR CONCRETE SHEAR SHEAR BY RFT. DESIGN SHEAR MAX. SPACING SHEAR RFT.
    Mpa Vu KN FVc KN FVs KN RFT. mm2/mm mm F S Av/S
    400 39.67 KN.m 41.70 0.00 0.0000 0.00 8 200 0.5029
    SAFE

    You might also like