Scribd Logo
Upload

Welcome to Scribd!

  • 59 views

    2SB824

    Uploaded by

    enriquevazquez27
    This document provides specifications for the 2SB824/2SD1060 50V/5A epitaxial planar silicon transistors. It lists the transistors' applications, features, absolute maximum ratings, electrical characteristics, package dimensions, and switching time test circuit. The transistors are suitable for relay drivers, high-speed inverters, converters, and other general large-current switching applications. Their low collector-to-emitter saturation voltage is listed as -0.4V max at -3A collector current and -0.3A base current.

    Copyright:

    © All Rights Reserved

    2SB824

    Uploaded by

    enriquevazquez27
    59 views5 pages
    This document provides specifications for the 2SB824/2SD1060 50V/5A epitaxial planar silicon transistors. It lists the transistors' applications, features, absolute maximum ratings, electrical characteristics, package dimensions, and switching time test circuit. The transistors are suitable for relay drivers, high-speed inverters, converters, and other general large-current switching applications. Their low collector-to-emitter saturation voltage is listed as -0.4V max at -3A collector current and -0.3A base current.

    Copyright

    © © All Rights Reserved

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the 2SB824/2SD1060 50V/5A epitaxial planar silicon transistors. It lists the transistors' applications, features, absolute maximum ratings, electrical characteristics, package dimensions, and switching time test circuit. The transistors are suitable for relay drivers, high-speed inverters, converters, and other general large-current switching applications. Their low collector-to-emitter saturation voltage is listed as -0.4V max at -3A collector current and -0.3A base current.

    Copyright:

    © All Rights Reserved
    59 views5 pages

    2SB824

    Uploaded by

    enriquevazquez27
    This document provides specifications for the 2SB824/2SD1060 50V/5A epitaxial planar silicon transistors. It lists the transistors' applications, features, absolute maximum ratings, electrical characteristics, package dimensions, and switching time test circuit. The transistors are suitable for relay drivers, high-speed inverters, converters, and other general large-current switching applications. Their low collector-to-emitter saturation voltage is listed as -0.4V max at -3A collector current and -0.3A base current.

    Copyright:

    © All Rights Reserved
    of 5

    Ordering number:686I

    PNP/NPN Epitaxial Planar Silicon Transistors

    2SB824/2SD1060

    50V/5A Switching Applications

    Applications Package Dimensions


    · Suitable for relay drivers, high-speed inverters, unit:mm
    converters, and other general large-current switch- 2010C
    ing.
    [2SB824/2SD1060]

    Features
    · Low collector-to-emitter saturation voltage :
    VCE(sat)=(–)0.4V max/IC=(–)3A, IB=(–)0.3A.

    JEDEC : TO-220AB 1 : Base


    ( ) : 2SB824
    EIAJ : SC-46 2 : Collector
    Specifications 3 : Emitter

    Absolute Maximum Ratings at Ta = 25˚C


    Parameter Symbol Conditions Ratings Unit
    Collector-to-Base Voltage VCBO (–)60 V
    Collector-to-Emitter Voltage VCEO (–)50 V
    Emitter-to-Base Voltage VEBO (–)6 V
    Collector Current IC (–)5 A
    Collector Current (Pulse) ICP (–)9 A
    Collector Dissipation PC Tc=25˚C 30 W
    Junction Temperature Tj 150 ˚C
    Storage Temperature Tstg –55 to +150 ˚C

    Electrical Characteristics at Ta = 25˚C


    Ratings
    Parameter Symbol Conditions Unit
    min typ max
    Collector Cutoff Current ICBO VCB=(–)40V, IE=0 (–)0.1 mA
    Emitter Cutoff Current IEBO VEB=(–)4V, IC=0 (–)0.1 mA
    DC Current Gain hFE1 VCE=(–)2V, IC=(–)1A 70* 280*
    hFE2 VCE=(–)2V, IC=(–)3A 30
    Gain-Bandwidth Product fT VCE=(–)5V, IC=(–)1A 30 MHz
    Output Capacitance Cob VCB=(–)10V, f=1MHz 100 pF
    (160) pF

    * : The 2SB824/2SD1060 are graded as follows by hFE at 1A :


    70 Q 140 100 R 200 140 S 280

    Any and all SANYO products described or contained herein do not have specifications that can handle
    applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
    control systems, or other applications whose failure can be reasonably expected to result in serious
    physical and/or material damage. Consult with your SANYO representative nearest you before using
    any SANYO products described or contained herein in such applications.
    SANYO assumes no responsibility for equipment failures that result from using products at values that
    exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
    parameters) listed in products specifications of any and all SANYO products described or contained
    herein.

    SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters


    TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
    91098HA (KT)/D251MH/4017KI No.686–1/4
    2SB824/2SD1060
    Ratings
    Parameter Symbol Conditions Unit
    min typ max
    Collector-to-Emitter Saturation Voltage VCE(sat) IC=(–)3A, IB=(–)0.3A (–)0.4 V
    Collector-to-Base Breakdown Voltage V(BR)CBO IC=(–)1mA, IE=0 (–)60 V
    Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=(–)1mA, RBE=∞ (–)50 V
    Emitter-to-Base Breakdown Voltage V(BR)EBO IE=(–)1mA, IC=0 (–)6 V
    Turn-ON Time ton See specified test circuit. 0.1 µs
    Storage Time tstg See specified test circuit. (0.7) µs
    1.4 µs
    Fall Time tf See specified test circuit. 0.2 µs

    Switching Time Test Circuit

    No.686–2/4
    2SB824/2SD1060

    No.686–3/4
    2SB824/2SD1060

    Specifications of any and all SANYO products described or contained herein stipulate the performance,
    characteristics, and functions of the described products in the independent state, and are not guarantees
    of the performance, characteristics, and functions of the described products as mounted in the customer’s
    products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
    the customer should always evaluate and test devices mounted in the customer’s products or equipment.
    SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
    semiconductor products fail with some probability. It is possible that these probabilistic failures could
    give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
    or that could cause damage to other property. When designing equipment, adopt safety measures so
    that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
    circuits and error prevention circuits for safe design, redundant design, and structural design.
    In the event that any and all SANYO products described or contained herein fall under strategic
    products (including services) controlled under the Foreign Exchange and Foreign Trade Control Law of
    Japan, such products must not be exported without obtaining export license from the Ministry of
    International Trade and Industry in accordance with the above law.
    No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
    mechanical, including photocopying and recording, or any information storage or retrieval system,
    or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
    Any and all information described or contained herein are subject to change without notice due to
    product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”
    for the SANYO product that you intend to use.
    Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
    guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
    no guarantees are made or implied regarding its use or any infringements of intellectual property rights
    or other rights of third parties.

    This catalog provides information as of September, 1998. Specifications and information herein are
    subject to change without notice.

    PS No.686–4/4
    This datasheet has been download from:

    www.datasheetcatalog.com

    Datasheets for electronics components.

    You might also like