Metric Measurements Lab - Basic Version

Metric Measurements Lab Basic Version
Key Concepts:
The Metric System, also referred to as the International System of Measurement (SI), is what the scientific community uses to measure data precisely. Units of measurement, such as feet, pounds, inches, and miles are part of the English System of Measurement that we use daily in the United States. These measurements are not part of the Metric System. The Metric System is based on the number 10. Thus, it is quite easy to change one unit into another because all units are related to one another by powers of 10. The three basic units of the Metric System that will be used in this laboratory investigation are grams (mass), liters (volume), and meters (length). Volume generally refers to how much of something (e.g. liquid, gas) a container can hold. Symbol refers to the abbreviation, or initials, used to denote a specific metric measurement (mL, cg, dm). Name refers to the full description of a specific metric measurement (e.g. deciliter, kilogram, nanometer). The first part of the name (deci, kilo, nano) refers to the amount or size of substance being measured. The second part of the name (liter, gram, meter) refers to the basic type of unit based on what is being measured: mass, volume, or length.
Introduction:
In most laboratory investigations where data is collected, precise measurements must be taken before observations and analysis of the data can be made. In scientific work, as well as everyday measuring in nearly every country outside of the United States, the Metric System is used. The Metric System is universal in all fields of science, so even scientists conducting research in different parts of the world and dont speak the same language can understand each others data. In this activity, metric measurements for length, volume, and mass will be reviewed using common classroom materials. Students will also practice using common laboratory equipment, such as metric rulers, meter sticks, and balances.
Materials:

Meter stick Metric ruler Small test tubes Rubber stoppers (jar lids are a suitable substitute) Pennies post-1982 (other coins can be substituted)
Balances (triple-beam or digital if available) suggestions will be given on how to measure mass in this lab if suitable balances cannot be obtained 50mL beaker (one for each student group is preferable) 100mL graduated cylinders (one for each student group is preferable)
Pre-Lab Questions
1. Why do scientists and other people in most countries use the Metric System for measurements?
2. Why is it easy to change from one unit to another in the Metric System?
3. Why is it difficult to convert English units of measurements that we use in America, such as miles to yards or feet?
4. Name several aspects of everyday life that would change if our country converts to using the Metric System.
Note: Prior to answering pre-lab questions #5-10, you should receive copies of the Metric Staircase tool, or at the very least be able to view an electronic copy of the staircase, for further assistance.
5. If you have 43.9 mg, it is equal to ___________________kg.
6. If you have 0.004695 Mg, it is equal to _____________________g.
7. If you have 176 daL, it is equal to ___________________________mL.
8. The symbol that is equal to 100 m is (1)___________________________.
9. If you have 0.001 liters, this is the same as having 1 ____________________ (name).
10. If you have 111.7centigrams of sugar, it is equal to _______________________hg.
Part 1 Measuring Length

1. Use meter sticks to measure the length, width, and height of a lab table or desk in the classroom. Record your measurements to the nearest hundredth of a meter in Data Table #1.
2. Convert the measurements from meters to centimeters and then to millimeters. Record your measurements in Data Table #1.
Data Table #1
Lab Table/Desk Measurements

Dimension Length Width Height meter (m) centimeter (cm) millimeter (mm)
3. Use metric rulers to measure the length of a test tube and the diameter of its mouth in centimeters. Record you measurements to the nearest millimeter in Data Table #2.
4. Convert the measurements from centimeters to millimeters. Record these measurements in Data Table #2.
Data Table #2
Test Tube Measurements

Dimension Length Diameter of Mouth centimeter (cm) millimeter (mm)
Part 2 Measuring Liquid Volume

1. Fill the small test tube to the top with water. Pour the water into the graduated cylinder.
2. The surface of the liquid will be slightly curved. This curvature is referred to as the meniscus. The meniscus is created by a property of water called adhesion. When water molecules are attracted to materials other than water molecules, this phenomenon is called adhesion. Water molecules are attracted to the molecules that make up the graduated cylinder which cause the meniscus to form.
3. To measure the volume accurately, your eye must be at the same level as the bottom of the meniscus. Record the volume of the water from the test tube to the nearest milliliter in Data Table #3.
http://chemsrvr2.fullerton.edu/HES/volume/volume_files/meniscus.gif
Data Table #3
Measurement of Liquid Volume

Object Volume (mL)
Water in Test Tube
Part 3 Measuring Mass

1. Place the 50mL beaker on the measurement tray of a three-beam or digital balance (instructions will follow below for measuring mass if suitable balances cannot be obtained. If you are using a triple beam balance, be sure that the riders are moved all the way to the left and that the pointer rests on zero. If you are using a digital scale, be sure to tare the scale so that the screen reads 0.0 grams.
http://www.explorelearning.com/ELContent/gizmos/ELScien ce_Deliverable/ExplorationGuides/images/EL_MSPS_TripBeamBal1.gif
Tare
http://tennesseecandlesupplies.com/images/scales/Primo_Chrome_P115C_Medium.jpg
2. Move the rider on the middle beam to the right one notch at a time until the pointer drops below zero. Move the rider left one notch. 3. Move the rider on the back beam one notch at a time until the pointer drops below zero again. Move the rider left one notch. 4. Slide the rider along the front beam until the pointer stops at zero. The mass of your object is equal to the sum of the readings on all three beams. 5. Record the mass of the beaker to the nearest tenth of a gram in Data Table #4 and then remove the beaker from the scale. 6. Repeat steps #2 through #5 using the rubber stopper (or equivalent) and then the coin. 7. Use the graduated cylinder to place exactly 40mL of water in the beaker. Find the combined mass of the beaker and water. Record the mass to the nearest tenth of a gram in Data Table #4. Data Table #4
Measurement of Mass
Object
Mass (g)
50mL Beaker
Rubber Stopper (or equivalent)
Coin (specify type)
50mL beaker plus 40mL of water
Note: If triple-beam or digital balances cannot be obtained, a rudimentary scale can be constructed out of a wooden bar with two Ziploc bags (see picture below). When the masses in
the two baggies are the same, the wooden bar should be horizontal. A useful fact when calibrating the rudimentary scale: according to the US mint, a post-1982 penny has mass 2.5 grams (www.usmint.gov; date retrieved 7/19/2010).
http://lpchscience.pbworks.com/Projectile-Lab
Concept Questions
1. How do you convert meters to centimeter mathematically? How do you convert centimeters to decimeters mathematically?
2. What is the largest volume of liquid your graduated cylinder can measure?
3. What is the smallest volume of liquid your graduated cylinder can measure?
4. What is the largest mass of an object your balance can measure (assuming you used a triple-beam or digital balance)?
5. What is the smallest mass of an object your balance can measure (assuming you used a triple-beam or digital balance)?
References:
1.
2. 3.
Activity adapted from: Levine, Joseph, S. (2002). Biology: Laboratory Manual A/Laboratory Skills, Pearson Prentice Hall. Cheryl Dudeck, Science Department Chair/Science Teacher, King College Prep High School, 4445 S. Drexel Avenue, Chicago, IL. 60653. Elena F. Koslover, Graduate Research Assistant, Biophysics Program, Stanford University, Stanford, CA. 94305.

Metric Measurements Lab - Basic Version

Uploaded by

Copyright:

Available Formats

Metric Measurements Lab - Basic Version

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Metric Measurements Lab - Basic Version

Uploaded by

Copyright:

Available Formats

Metric Measurements Lab Basic Version

5. If you have 43.9 mg, it is equal to ___________________kg.

6. If you have 0.004695 Mg, it is equal to _____________________g.

7. If you have 176 daL, it is equal to ___________________________mL.

8. The symbol that is equal to 100 m is (1)___________________________.

10. If you have 111.7centigrams of sugar, it is equal to _______________________hg.

Part 1 Measuring Length

Lab Table/Desk Measurements

Test Tube Measurements

Part 2 Measuring Liquid Volume

Measurement of Liquid Volume

Water in Test Tube

Part 3 Measuring Mass

Rubber Stopper (or equivalent)

Coin (specify type)

50mL beaker plus 40mL of water

You might also like