Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    Oil Deflector # 3 (ID SHAFT 530,00 MM)

    Uploaded by

    Danil Aditya
    The document is an engineering drawing showing dimensions and tolerances for an air seal exit housing part. Key details include: - The part is labeled as "Air seal exiter housing" and has a part number of 617.06. - Dimensions are provided for the inside diameter of the oil deflector and the clearances for the top, bottom, left and right sides. - General notes provide information on scales, formats, approval, and a request to review for any errors before approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Oil Deflector # 3 (ID SHAFT 530,00 MM)

    Uploaded by

    Danil Aditya
    30 views1 page
    The document is an engineering drawing showing dimensions and tolerances for an air seal exit housing part. Key details include: - The part is labeled as "Air seal exiter housing" and has a part number of 617.06. - Dimensions are provided for the inside diameter of the oil deflector and the clearances for the top, bottom, left and right sides. - General notes provide information on scales, formats, approval, and a request to review for any errors before approval.

    Original Title

    oil deflector # 3 (ID SHAFT 530,00 mm)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document is an engineering drawing showing dimensions and tolerances for an air seal exit housing part. Key details include: - The part is labeled as "Air seal exiter housing" and has a part number of 617.06. - Dimensions are provided for the inside diameter of the oil deflector and the clearances for the top, bottom, left and right sides. - General notes provide information on scales, formats, approval, and a request to review for any errors before approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    30 views1 page

    Oil Deflector # 3 (ID SHAFT 530,00 MM)

    Uploaded by

    Danil Aditya
    The document is an engineering drawing showing dimensions and tolerances for an air seal exit housing part. Key details include: - The part is labeled as "Air seal exiter housing" and has a part number of 617.06. - Dimensions are provided for the inside diameter of the oil deflector and the clearances for the top, bottom, left and right sides. - General notes provide information on scales, formats, approval, and a request to review for any errors before approval.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    8 7 6 5 4 3 2 1

    0,0
    SECTION A-A

    16
    A
    F F

    8x
    Split line

    Split line
    (TOP)

    E E
    2,00
    (L)
    15,00

    655,00
    565,00
    545,00

    3,15
    (R)
    D D
    (BOTTOM)

    2,00 0,30

    C 10,00 C

    A 15,00 OD Shaft
    30,30 530,00
    pcd 617,06
    TOP BOTTOM L R
    B ID oil deflector 530,35 530,05 530,15 530,15 B
    Clearance 0,35 0,05 0,15 0,15
    Approved By 1 Set 1 Air seal exiter housing BRASS - -
    PART REMARK REV
    QTY PART NAME MATERIAL
    NO
    PROYEKTION DRAWING BY DATE
    > 0 6 30 120 400 1000 Surowinoto 17/04/2022
    >= 6 30 120 400 1000 2000 CHECKED & APPROVED BY
    SCALE
    1:5 NAJAR
    A TOL
    NO
    0,05 0,1 0,15 0,2 0,3 0,5
    FORMAT HIKMAT
    A
    2022-024 A4
    Note : Please review before approved, JOB
    BAGIO -
    CUSTOMER PT. PJB UNIT MAINTENANCE REPAIR & UNITS
    and please do correction at the drawing if found miss on design OVERHOUL JP-1 MM DADANG

    8 7 6 5 4 3 2 1

    You might also like