Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    RF 35

    Uploaded by

    Isra Nazeer
    RF-35 is an organic-ceramic laminate material well suited for low cost, high volume commercial microwave and radio frequency applications. It offers excellent peel strength for copper cladding even compared to standard epoxy materials. Additionally, RF-35 has an ultra low moisture absorption rate and low dissipation factor that minimize phase shift with frequency changes. The material is available in a variety of thicknesses from 0.01-0.06 inches with copper cladding weights of 1/2 oz, 1 oz, or 2 oz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RF 35

    Uploaded by

    Isra Nazeer
    36 views3 pages
    RF-35 is an organic-ceramic laminate material well suited for low cost, high volume commercial microwave and radio frequency applications. It offers excellent peel strength for copper cladding even compared to standard epoxy materials. Additionally, RF-35 has an ultra low moisture absorption rate and low dissipation factor that minimize phase shift with frequency changes. The material is available in a variety of thicknesses from 0.01-0.06 inches with copper cladding weights of 1/2 oz, 1 oz, or 2 oz.

    Original Description:

    Data Sheet

    Original Title

    RF-35

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    RF-35 is an organic-ceramic laminate material well suited for low cost, high volume commercial microwave and radio frequency applications. It offers excellent peel strength for copper cladding even compared to standard epoxy materials. Additionally, RF-35 has an ultra low moisture absorption rate and low dissipation factor that minimize phase shift with frequency changes. The material is available in a variety of thicknesses from 0.01-0.06 inches with copper cladding weights of 1/2 oz, 1 oz, or 2 oz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views3 pages

    RF 35

    Uploaded by

    Isra Nazeer
    RF-35 is an organic-ceramic laminate material well suited for low cost, high volume commercial microwave and radio frequency applications. It offers excellent peel strength for copper cladding even compared to standard epoxy materials. Additionally, RF-35 has an ultra low moisture absorption rate and low dissipation factor that minimize phase shift with frequency changes. The material is available in a variety of thicknesses from 0.01-0.06 inches with copper cladding weights of 1/2 oz, 1 oz, or 2 oz.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    RF-35

    High volume commercial microwave and RF laminate


    RF-35 is an organic-ceramic laminate in the ORCER family of Taconic products. It is based on woven glass
    reinforcement. RF-35 is a result of Taconic’s expertise in both ceramic fill technology and in coated PTFE
    fiberglass.

    RF-35 is the best choice for low cost, high volume commercial microwave and radio frequency applications.
    And excellent peel strength for 1/2 ounce and 1 ounce copper (even in comparison to standard epoxy
    materials), a critical aspect whenever rework is required. And ultra low moisture absorption rate and low
    dissipation factor minimize phase shift with frequency.

    Benefits
    • Low Cost
    • Excellent Peel Strength
    • Exceptionally Low Dissipation Factor
    • Low Moisture Absorption
    • Enhanced Surface Smoothness

    Applications
    • Power amplifiers
    • Filters and couplers
    • Passive components

    Asia/Australia China Europe/Middle East North&South America


    Korea Taconic Company AGC Multi Material (Suzhou) Inc. AGC Multi Material Europe SA AGC Nelco America Inc.
    Republic of Korea Suzhou City, China Lannemezan, France Tempe, AZ USA 85281
    Tel: +82-31-704-1858 Tel: +86-512-286-7170 Tel: +33-05-6298-5290 Tel: +602-679-9196
    [email protected] [email protected] [email protected] [email protected]
    www.agc-multimaterial.com www.agc-multimaterial.com www.agc-multimaterial.com www.agc-multimaterial.com
    RF-35 Typical Values
    Property Test Method Unit Value Unit Value
    Dielectric Constant @ 1.9 GHz IPC-TM 650 2.5.5 3.50 3.50
    Dissipation Factor @ 1.9 GHz IPC-TM 650 2.5.5 0.0018 0.0018
    Moisture Absorption (.060") IPC-TM 650 2.6.2.1 % 0.02 % 0.02
    Peel Strength (1/2 oz. copper) IPC-TM 650 2.4.8 lbs./linear inch >8.0 N/mm >1.5
    Peel Strength (1 oz. copper) IPC-TM 650 2.4.8 lbs./linear inch >10.0 N/mm >1.8
    Dielectric Breakdown IPC-TM 650 2.5.6 kV 41 kV 41
    Volume Resistivity IPC-TM 650 2.5.17.1 Mohm/cm 1.26 x 109 Mohm/cm 1.26 x 109
    Surface Resistivity IPC-TM 650 2.5.17.1 Mohm 1.46 x 108 Mohm 1.46 x 108
    Arc Resistance IPC TM 650 2.5.1 seconds >180 seconds >180
    Flexural Strength Lengthwise ASTM D 790 psi >22,000 N/mm2 >152
    Flexural Strength Crosswise ASTM D 790 psi >18,000 N/mm2 >124
    Thermal Conductivity ASTM F 433 W/m/K 0.24 W/m/K 0.24
    Tensile Strength Lengthwise ASTM D 638 psi 27,000 N/mm2 187
    Tensile Strength Crosswise ASTM D 638 psi 21,000 N/mm2 145
    Dimensional Stability Lengthwise IPC-TM 650 2.4.39 in/in 0.00004 mm/mm 0.00004
    Dimensional Stability Crosswise IPC-TM 650 2.4.39 in/in -0.00010 mm/mm -0.00010
    x-y CTE ASTM D 3386 (TMA) ppm/°C 19-24 ppm/°C 19-24
    z CTE ASTM D 3386 (TMA) ppm/°C 64 ppm/°C 64
    Flammability UL-94 % V-0 % V-0
    Hardness Rockwell M Scale % 34 % 34

    Type Dk
    TLY-5A 2.17
    TLY-5 2.20
    TLY-3 2.33
    TLT-0 TLX-0 2.45
    TLT-9 TLX-9 2.50
    TLT-8 TLX-8 2.55
    TLT-7 TLX-7 2.60
    TLT-6 TLX-6 2.65
    TLE-95 2.95
    TLC-27 2.75
    TLC-30 3.00
    TLC-32 3.20
    RF-30 3.00
    RF-35 RF-35P 3.50
    RF-60 6.15
    CER-10 10
    Remarks : All reported values are typical and should not be used for specification purposes. In all instances the user shall
    determine suitability in any given application.

    How to Order
    Designation Dielectric Constant
    RF-35 3.5+/- 0.1
    Available Thickness Normal Dielectric Constant
    0.0100'' (0.25mm) 3.5
    0.0200'' (0.50mm) 3.5
    0.0300'' (0.76mm) 3.5
    0.0600'' (1.52mm) 3.5

    Standard sheet size is 36” x 48” (914mm x 1220mm). Please contact our
    Customer Service Department for availability of other sizes and claddings.

    RF-35 can be ordered with the Panels may be


    following electrodeposited copper : ordered cut to size

    Designation Weight Copper thickness Copper Thickness Typical Panel Sizes


    12'' x 18'' 304mm x 457mm
    CH 1/2 oz./sq. ft. ~ .0007'' ~18 μm
    16'' x 18'' 406mm x 457mm

    18'' x 24'' 457mm x 610mm


    C1 1 oz./sq. ft. ~ .0014'' ~ 35 μm
    16'' x 36'' 406mm x 914mm

    24'' x 36'' 610mm x 914mm


    C2 2 oz./sq. ft. ~ .0028'' ~ 70 μm
    18'' x 48'' 457mm x 1,020mm

    An example of our part number is : RF-35-0600-CH/CH-18'' x 24'' (RF-35-0600-CH/CH-457mm x 610mm)

    You might also like