Installation

Hardware Installation

• Make sure you have a personal computer with

an open USB port before connecting the drive
to your computer.
• Power for all devices should be turned off
before attaching the cables.
Connect the drive to the computer and to a
camcorder, VCR or video device with
Audio/Video cables or S-video cable
(not supplied.) as shown in figure.

A. Connecting to computer
Connect the USB converter cable to the
External Super Multi DVD Rewriter.

Connect the other end of the USB USB converter cable

converter cable to your computer.

Connect the AC adapter plug to the

power connector at the rear of the drive.
Attach the AC adapter to the AC wall
To AC wall outlet.
outlet.

When the computer is ready, confirm

that the drive is detected. And then,
insert the supplied software CD into the
External Super Multi DVD Rewriter and
install the software.

B. Connecting to Camcorder or
Video Device
OR
Connect the Camcorder or Video device.

Refer to the manual supplied with the

device to be connected.

NOTE

• If your Video device is equiped with S-Video

output, you can connect an RCA cable from
the audio output of the video device to the
audio input of the drive, and S-Video cable
from the S-Video output of the video device
to the S-Video input of the drive.
 Location and function of controls
This following is the general figure of the design of the drive.
The drive’s appearance and specifications may change without prior notice.

Front

1. One touch button/indicator

Select the one touch recording mode.
2. Disc Tray
3. Drive activity indicator
The LED used to indicate the operation of
External Super Multi DVD Rewriter.
4. Emergency Eject Hole
5. Stop/Eject Button
1 2 3 4 5
Rear
1. Audio In jack (L/R)
Connect the Audio cable(not supplied) when
connecting the External Super Multi DVD
Rewriter to a video device such as a Video
camera, VCR or TV.
2. Video In jack
Connect the Video cable(not supplied) when
connecting the External Super Multi DVD
Rewriter to a video device such as a Video
camera, VCR or TV.
3. S-Video In jack
Connect the S-Video cable(not supplied) when
connecting the External Super Multi DVD
Rewriter to a video device such as a Video
camera, VCR or TV. 1 2 3 4 5
4. USB Connector
This connector is used to connect to the USB
converter cable.
5. Power Connector
This connector is used to connect to the AC
Power adapter cord.

Removing the USB converter cable

The drive supports the plug and play(not swap) 3. Click “Safely Remove USB Mass Storage
function of Windows, and can be removed and Device-Drive[x:]”.
inserted by performing the following operation. 4. Click “Ok” and then remove the USB converter
cable.
1. Stop the application software being currently used.
2. Click the icon “ ” of the taskbar located on your
screen’s bottom right side.

NOTE

Don’t remove the USB converter cable when

the busy indicator on the drive blinks, or during
computer startup.
 Quick Set-up Guide
External GSA-E20N
Super Multi DVD Rewriter GSA-E20L

To install of your product, please read this guide manual carefully and completely. For the detailed owner’s manual of the drive,
please refer to the CD manual.

Features System Environment

• Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. Computer
• Buffer Under Run error protection technology. This unit can be operated in the system environment explained here.
• Emergency eject support.
System CPU: Pentium III 800MHz, Memory: 256MB
• Combination of CD-R/RW, DVD-R/RW, DVD+R/RW,
requirements (Recommended for optimal performance : Pentium IV
DVD+R DL, DVD-R DL and DVD-RAM drive functions into one drive. 2.4GHz, Memory: 512MB or greater) Pentium IV
• Supports region playback control Phase II. 1.6GHz or faster is required for AV Capture.
• A video capture DVD Rewriter with USB 2.0 interface for VGA Card Memory 32MB or greater. (Recommended: 64MB)
computers, S-video and analog audio/video input terminals for video Hard disk 10GB or more free space. (The free space needed for
device. writing depends on the quantity of data.)
GSA-E20L GSA-E20N (DVD±DL:16GB)
Light Scribe X Interface USB 2.0 port
CD-ROM drive For Software installation
Package Items Software Required OS Windows XP(Home Edition/ Professional/SP1,SP2),
Direct X 9.0 or Higher is required.
Item Quantity
CD-R, CD-RW, CD-R : LG, Mitsubishi Kagaku Media, Verbatim, Taiyo
- External Super Multi DVD Rewriter 1 DVD-R, DVD-RW, Yuden, TDK, Ritek or HP discs are recommended.
- USB 2.0 converter cable 1 DVD+R, DVD+RW, CD-RW : LG, Mitsubishi Kagaku Media, Verbatim discs
DVD±R DL, are recommended.
- AC Power Adapter (with Power supply cable) 1
DVD-RAM discs DVD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo
- Software CD Yuden are recommended.
(DVD Writer Soultion, One touch DVD) 2
DVD-RW : JVC, Mitsubishi Kagaku Media, TDK are
- Quick Setup Guide 1 recommended.
DVD+R : Mitsubishi Kagaku Media, Verbatim are
recommended.
DVD+RW : TDK, FujiFilm, Ricoh, HP are recommended.
DVD±R DL : Mitsubishi Kagaku Media, Verbatim are
recommended.
DVD-RAM : Maxell, Mitsubishi Kagaku Media are
recommended.

* Compatibility problem in write/read function may occur with some media

depending on the media manufacturing quality.

Specifications
Supported Discs DVD-ROM(Single/Dual), DVD-RW, DVD-R, Data transfer rate
DVD+RW, DVD+R, DVD+R Double layer, DVD-R Sustained CD-ROM : 7200 Kbytes/s (48X max)
Dual layer, DVD- RAM, CD Digital Audio & CD- DVD-ROM : 22160 Kbytes/s (16X max)
Extra, CD-Plus, CD-ROM, CD-ROM XAReady, CD-I Average Access CD-ROM : 120msec (Typical)
FMV, CD-TEXT, CD-Bridge, CD-R, CD-RW, Photo- Time (1/3 Stroke) DVD-ROM : 140msec (Typical)
CD (Single & Multi-Session), Video CD, DVD-VIDEO DVD-RAM : 200msec (Typical)
Capture Recording CD-R, CD-RW(VCD/SVCD), DVD±R, DVD±RW, Buffer capacity 2 Mbytes
Supported Discs DVD±R DL(DVD) MTBF 125000 Power On Hours (Duty Cycle 10%)
Interface USB 2.0 Read/Write CD-R, CD-RW, DVD-RW, DVD+RW, DVD-RAM,
Dimensions (WxHxD)160x50x230mm DVD±R DL
Weight About 1365g Writing Methods CD: Disc-at-once, Track-at once,
Read/Write Speed Session at once, Packet Write
Write : CD-R: 16X, 24X, 40X, 48X DVD:Random write, Sequential write
CD-RW: 4X, 10X, 16X, 24X, 32X Power Requirement AC Adapter
DVD-R: 2X, 4X, 8X, 12X, 16X Input 100-240Vac, 0.6A 47-63 Hz
DVD-RW : 1X, 2X, 4X, 6X Output 12Vdc 2A (max 2.5A)
DVD+R: 2.4X, 4X, 8X, 12X, 16X Operating Environment
DVD+RW: 2.4X, 4X, 8X Temperature 5 to 35 degC
DVD-RAM: 2X, 3X, 5X(Ver.2.2) Humidity 20 to 80 %
DVD+R DL: 2.4X, 4X, 6X, 8X Storage Environment
Temperature -20 to 55 degC
DVD-R DL: 4X
Humidity 15% to 85% RH
Read : CD-ROM/R: 48X max
CD-RW: 40X max
DVD-ROM (Single/Dual):16X/12X max
DVD+/-RW: 12X max Software
DVD+/-R: 16X max Install the supplied CD/DVD Recording Authoring Software before using this unit.
DVD-VIDEO: 8X max * Please uninstall any previous CD burning software you may have loaded on
DVD-RAM: 2X, 3X, 5X max (Ver.2.2) your PC in order to prevent possible compatibility issues.
DVD+R DL: 12X max Once you have installed the supplied software, you may (if you wish) begin to
DVD-R DL: 12X max reinstall previous software, taking note for errors.
We recommend using the drive with the latest software as some problems
❋ The drive’s appearance and specifications may change without prior notice. encountered when using the drive can be solved by updating the software.
- The maximum data transfer rate varies according to the performance
capabilities of the PC. Please visit www.lgservice.com and install the program,
- For the sake of periodic improvements, specifications and appearance are “LG ODD Online F/W update.” By using the program,
subject to change without notice. you can automatically check the latest information about FirmWares and
- We have taken all possible measures to assure the quality of our products, update the FirmWare.
but we cannot be responsible for the consequences if defect occurs.
Worldwide support ; http://www.LGservice.com
P/NO. 3828HN1012J Ver. A Worldwide corporate site : http://www.LGE.com
Safety Instructions
PERICOLO : Il dispositivo di lettura e scrittura utilizzato in questo
CAUTION: The laser used in the External Super Multi DVD Rewriter
masterizzatore utilizza un raggio laser che, se osservato da vicino, può
can damage your eyes. Do not attempt to open the cover. To reduce
the risk of electric shock, do not remove the cover (or back). danneggiare la vista. Evitare di smontare il coperchio dell’apparecchio.
There are no user-serviceable parts inside. Refer servicing to qualified Al fine di prevenire eventuali folgorazioni, evitare di smontare
service personnel. Use of controls or performance of procedures other l’apparecchio. All’interno dell’apparecchio non sono presenti parti che
than those specified herein may result in hazardous radiation exposure. richiedono manutenzione da parte dell’utente. In caso di difetti o
guasti, rivolgersi ad un Centro di Assistenza Tecnica. L’esecuzione di
WARNING: To reduce the risk of fire or electric shock, do not expose
procedure diverse da quella espressamente indicate in questo
this appliance to rain or moisture.a
manuale può provocare pericolose esposizioni alle radiazioni laser.
ATTENZIONE: Al fine di evitare cortocircuiti o principi di incendio,
evitare di esporre questo apparecchio alla pioggia o ad una eccessiva
VORSICHT : Der in diesem External Super Multi DVD -Laufwerk umidità ambientale.
benutzte Laser kann Ihre Augen schädigen. Versuchen Sie keinesfalls,
die Abdeckung zu öffnen. Um die Gefahr eines elektrischen Schocks
zu reduzieren, sollten Sie die Abdeckung (oder Rückseite) keinesfalls PRECAUCION: El láser utilizado en la unidad External Super Multi
entfernen. Im Inneren des Geräts befinden sich keine Teile, die vom DVD puede dañar sus ojos. No intente abrir la tapa. Para reducir el
Benutzer selbst gewartet werden können. Überlassen Sie die Wartung riesgo de descarga eléctrica, no quite la tapa (ni la parte posterior).
qualifizierten Kundendiensttechnikern. Beachten Sie bei der Benutzung No hay piezas internas que deba mantener el usuario.
von Bedienelementen und der Durchführung von Prozeduren El servicio de mantenimiento debe efectuarlo personal técnico cualificado.
unbedingt die Anweisungen dieses Handbuchs, da andernfalls El uso de controles o la ejecución de procedimientos distintos de los
gefährliche Strahlung freigesetzt werden kann. especificados en este manual pueden ser causa de exposición a
WARNUNG : Setzen Sie das Laufwerk keinesfalls Regen oder radiación peligrosa.
Feuchtigkeit aus, um die Gefahr eines Brandes oder elektrischen ADVERTENCIA: Para reducir el riesgo de fuego o descarga eléctrica,
Schocks zu reduzieren. no exponga este aparato a la lluvia ni a la humedad.

CUIDADO: O laser utilizado na unidade Super Multi DVD pode causar

ATTENTION: l'exposition au laser utilisé dans le super graveur multi-DVD
présente un danger pour les yeux. N'essayez pas d'ouvrir le capot. lesões oculares. Não tente abrir a tampa. Para reduzir o risco de
Afin de réduire les risques de chocs électriques, ne retirez pas le capot choques eléctricos, não retire a tampa (quer frontal quer superior ).
(ni l'arrière du dispositif). Aucune pièce interne ne peut être remplacée par A unidade não contém peças que possam ser reparadas pelo utilizador.
l'utilisateur. Pour la maintenance de l'appareil, adressez-vous au personnel Deixe a manutenção para um técnico da assistência qualificado.
qualifié du service de maintenance. L'utilisation de commandes ou de A utilização de controlos ou a execução de procedimentos que não
procédures différentes de celles spécifiées ci-après peut entraîner une sejam os especificados neste manual podem causar a exposição a
exposition à des rayons dangereux. radiações perigosas.

AVERTISSEMENT :Ne pas exposer ce matériel à la pluie ou à AVISO: Para reduzir o risco de incêndio ou choque elétrico não
l’humidité (risques d’incendie et d’électrocution). exponha este aparelho á chuva ou humidade.

This product is manufactured to comply with the radio interference Industry Canada requirement
requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC. This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003
Dieses Produkt erfüllt die Funkstörungsanforderungen folgender Normen:
89/336/EEC, 93/68/EEC und 73/23/EEC. du Canada.

Ce produit a été fabriqué conformément aux prescriptions EEC DIRECTIVE FCC COMPLIANCE STATEMENT
89/336/EEC, 93/68/EEC et 73/23/EEC.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Questo prodotto risponde alle direttive CEE 89/336, 93/68 e 73/23, relative
alla compatibilità elettromagnetica.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
Este producto ha sido fabricado cumpliendo los requisitos sobre interferen- generates, uses, and can radiate radio frequency energy and, if not
cias de radio de la DIRECTIVAS CEE 89/336/CEE, 93/68/CEE y 73/23/CEE. installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
CLASS 1 LASER PRODUCT If this equipment does cause harmful interference to radio or
KLASSE 1 LASER PRODUKT television reception, which can be determined by turning the
LUOKAN 1 LASER LAITE
equipment off and on, the user is encouraged to try to correct the
KLASS 1 LASER APPARAT
CLASE 1 PRODUCTO LÁSER interference by one or more of the following measures:
CLASSE 1 PRODOTTO LASER - Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
CAUTION : CLASS 3B VISIBLE AND INVISIBLE LASER RADIATION which the receiver is connected.
WHEN OPEN. AVOID EXPOSURE TO THE BEAM. - Consult the dealer or an Authorized Service Center for help.
ADVARSEL : KLASSE 3B SYNLIG OG USYNLIG LASERSTRÅLING VED • FCC WARNING
ÅBNING. UNDGÅ UDSÆTTELSE FOR STRÅLING. Changes or modifications not expressly approved by the party
ADVARSEL : KLASSE 3B SYNLING OG USYNLIG LASERSTRÅLING responsible for compliance could void the user’s authority to operate
NÅR the equipment.
DEKSEL ÅPENS. UNNGÅ EKSPONERING FOR STRÅLEN. • This External Super Multi DVD Rewriter is for use only with UL
listed personal computers that have installation instructions detailing
VARNING : KLASSE 3B SYNLING OCH OSYNLIG LASERSTRÅLNING
user-installation of card cage accessory.
NÄR DENNAL DEL ÄR ÖPPNAD. STRÅLEN ÄR FARLIG.
VARO! : KURSSI 3B NÄKYVÄ JA NÄKYMÄTÖN AVATTAESSA OLET
ALTTIINA LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEN. ■ Microsoft® and Windows® are trademarks registered in the United
States and other countries by the Microsoft Corporation.
The appliance is not intended for use by young children or infirm persons ■ The company names and product names written in this manual are
without supervision. trademarks or registered trademarks of the respective companies.