Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Part Name:-Body PART NO.:-1501400100

    Uploaded by

    Prakash kumarTripathi
    The feasibility study summarizes 29 characteristics of part number 1501400100 to determine if they can be achieved. All 29 characteristics were found to be feasible using various measurement methods such as micrometers, calipers, and surface roughness tests. Materials, surface treatments, and weights were also approved by suppliers. The part is made of AISI 304 stainless steel and should be free of burrs or other defects.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    Part Name:-Body PART NO.:-1501400100

    Uploaded by

    Prakash kumarTripathi
    29 views4 pages
    The feasibility study summarizes 29 characteristics of part number 1501400100 to determine if they can be achieved. All 29 characteristics were found to be feasible using various measurement methods such as micrometers, calipers, and surface roughness tests. Materials, surface treatments, and weights were also approved by suppliers. The part is made of AISI 304 stainless steel and should be free of burrs or other defects.

    Original Title

    BODY

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The feasibility study summarizes 29 characteristics of part number 1501400100 to determine if they can be achieved. All 29 characteristics were found to be feasible using various measurement methods such as micrometers, calipers, and surface roughness tests. Materials, surface treatments, and weights were also approved by suppliers. The part is made of AISI 304 stainless steel and should be free of burrs or other defects.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    29 views4 pages

    Part Name:-Body PART NO.:-1501400100

    Uploaded by

    Prakash kumarTripathi
    The feasibility study summarizes 29 characteristics of part number 1501400100 to determine if they can be achieved. All 29 characteristics were found to be feasible using various measurement methods such as micrometers, calipers, and surface roughness tests. Materials, surface treatments, and weights were also approved by suppliers. The part is made of AISI 304 stainless steel and should be free of burrs or other defects.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    FEASIBILITY STUDY

    SEI (Design Input Verification)

    PART NAME :- BODY PART NO. :-1501400100

    CUSTOMER : PV CLEAN MOBILITY TECHNOLOGIES PVT.LTD. DATE:- 28.07.2021

    M/C. Name & No. :AS PER LIST

    Operator & Inspector Name :AS PER LIST


    Feasibile
    S.No. Characterstics Specification Checking Method Reason if not Feasibile
    Yes No
    1 DIA 10.9±0.1 MM ü

    2 TOTAL LENGTH 17.2±0.1 DVC ü

    3 LENGTH 2.8±0.1 DVC ü

    4 LENGTH 1.2±0.1 PP ü

    5 CHAMFER 1×15° PP ü

    6 ID 10.16/10.19 DVC ü

    7 CYLINDERICITY 0.02 DAIL WITH V-BLOCK ü

    8 OD 12.2±0.05 DMM ü

    9 CONCENTRICITY 0.05 DAIL WITH V-BLOCK ü

    10 LENGTH 4×6±0.1 DVC ü

    11 LENGTH 12.2±0.1 DVC ü

    12 FLATNESS 0.02 DAIL WITH V-BLOCK ü

    13 ID 6.5±0.1 DVC ü

    14 CONCENTRICITY 0.05 DAIL WITH V-BLOCK ü

    15 OD 8.4±0.05 DMM ü

    16 CONCENTRICITY 0.05 DAIL WITH V-BLOCK ü

    17 RADIUS R 0.15 PP ü

    18 DIM. 4×2±0.1 ü

    19 RADIUS R 0.2 PP ü

    20 RADIUS R 0.3 PP ü

    21 RADIUS R 0.2 PP ü

    22 SURFACE ROUGHNESS Ra 0.8 RT ü

    23 SURFACE ROUGHNESS Ra 0.8 RT ü

    24 CHAMFER 0.2 PP ü

    PART SHOULD BE FREE FROM BURRS


    25 APPEARENCE
    & OTHER MACHINING DEFECTS
    VISUALLY ü

    26 MATERIAL AISI - 304 SUPPLIER/THIRD PARTY ü


    1 mg MAX
    27 MILLIPORE VALUES MAXIMUM PARTICLE SIZE:- 500 SUPPLIER/THIRD PARTY ü
    MICROMETER

    28 SURFACE TREATMENT GLOSSY FINISH SUPPLIER/THIRD PARTY ü

    29 COMPONENT WEIGHT 1g WEIGHING SCALE ü

    Feasible (if Feasible then Write Yes) : YES

    Not Feasible (Give Your Comments) :


    Sign. CFT Members :
    1. Mr. PARAMVIR SINGH 6. Mr. VINAY SINGH
    2. Mr. PRAKASH TRIPATHI 7. Mr. CHAND RAM
    4. Mr. BANWARI SINGH 8. Mr.
    5. Mr. RAJGIR 9. Mr.
    DOC No:-SEI/PD/F-02A
    Rev. No. : 00
    Eff. Date : 01.10.2018

    Remarks

    You might also like