Catalog

Number

Notes

FEATURES & SPECIFICATIONS Type

INTENDED USE — Built on the compact, low-profile Z strip channel, this LED strip offers long
maintenance-free life, several color temperatures, lumen outputs and lengths. Ideal for new construc-
tion and retrofit applications in T5 and T8 lengths. Ideal for uplight and downlight in commercial, retail,
manufacturing, warehouse, cove and display applications. Certain airborne contaminants can LED Striplight
diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate
Compatibility table for suitable uses.
CONSTRUCTION — Compact-design channel and cover are formed from code-gauge cold-rolled steel.
Easy to install row aligner included for continuous row mounting.
Finish: Paint options include high-gloss, baked white enamel (WH), galvanized (GALV), matte black (MB)
and smoke gray (SKGY). After fabrication, five-stage iron phosphate pre-treatment ensures superior paint
ZL1N
adhesion and rust resistance.
OPTICS — Standard diffuse snap on/snap off lens eliminates pixels, improves uniformity and minimizes 24", 48" and 96" Lengths
glare. L/LENS option available.
ELECTRICAL — L70>60,000hours. Utilizes high-output LEDs integrated on a two-layer circuit board,
ensuring cool-running operation. Optional internal pluggable wiring harness for reduced labor cost in row
mounting applications. (See PLR_ ordering information on page 3.) Electronic LED driver is rated for 75
input watts maximum (see Operational Data on page two for actual wattage consumption), multi-volt
input and 0-10V dimming standard. This fixture is designed to withstand a maximum line surge of
2.5kV at 0.75kA combination wave for indoor locations, for applications requiring higher level of protec-
tion additional surge protection must be provided.
L/Lens
LEDs provide nominal 80 CRI at 3000 K, 3500 K,4000 K, or 5000 K.
Lumen output up to 2,000 lumens per foot. In 86°F (30°C) ambient environments. Luminaire should be
installed in applications where ambient temperatures do not exceed 86°F (30°C).
INSTALLATION — Tool-less channel cover for easy installation.
Fixture may be surface mounted (with or without ZSPRG hanger), pendant or stem mounted with
appropriate mounting options. Three-point aligner locks in place for easy continuous row mounting.
LISTINGS — CSA certified to US and Canadian safety standards. For use in damp locations between
Lensed
-40°F (-40°C) and 86°F (30°C).
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions
of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products
List at www.designlights.org to confirm which versions are qualified.
BUY AMERICAN — Product with the BAA option is assembled in the USA and meets the
Buy America(n) government procurement requirements under FAR, DFARS and DOT.
Please refer to www.acuitybrands.com/buy-american for additional information.
WARRANTY — 5-year limited warranty. Complete warranty terms located at: Buy American
www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to provide
consistent color appearance and out-of-the-box control compatibility with simple
commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for
chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® or control networks
marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details

INDUSTRIAL ZL1N
Page 1 of 7
ZL1N  LED Striplight
A+ Capable options indicated
by this color background.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example:  ZL1N L48 3000LM FST ­MVOLT 40K 80CRI WH

Series Length Reflectors‡ Nominal lumens‡ Diffuser Voltage

ZL1N LED striplight L24 24" ‡ (blank) Less reflector 1500LM 1,500 lumens FST Snap on frosted, diffuse MVOLT 120-277V
SMR Symmetric 2500LM 2,500 lumens L/LENS No diffuser 120 120V
3500LM 3,500 lumens SBL FST Straight blade louver with snap 208 208V
L46 46" (blank) Less reflector 3000LM 3,000 lumens on frosted, diffuse 240 240V
L48 48" ASR Asymmetric (L48 only) 5000LM 5,000 lumens 277 277V
SMR Symmetric 7000LM 7,000 lumens 347 347V ‡
TZL1N LED striplight ‡ L92 92" (blank) Less reflector 6000LM 6,000 lumens 480 480V ‡
L96 96" SMR Symmetric 10000LM 10,000 lumens
14000LM 14,000 lumens

Color temperature Color rendering index Options Paint finish

30K 3000 K 80CRI 80 CRI PLR__ Plug-in wiring‡ Individual Controls ‡ WH White
35K 3500 K 90CRI 90 CRI PLR1LVG Plug-in wiring-low voltage‡ LBOZU 360° low mount LSXR PIR sensor, (7-15' mounting GALV Galvanized
40K 4000 K E7W Emergency battery pack, 7W heights), ON/OFF occupancy, pre-wired (LINK) ‡ MB Matte black
50K 5000 K CA Title 20 Noncompliant‡ LBH0SZU 360° low mount LSXR PIR sensor, (7-15' mount- SKGY Smoke gray
2E7W Two Emergency battery packs, 7W ing heights), high/low occupancy dimming,
CA Title 20 Noncompliant‡ pre-wired (LINK)‡
E10WLCP Emergency battery pack, 10W Linear LBPZU 360° low mount LSXR PIR sensor, (7-15' mounting
Constant Power, Certified in CA Title heights), ON/OFF photocell, pre-wired (LINK) ‡
20 MAEDBS‡ LBM0SZU 360° low mount LSXR PIR sensor, (7-15' mount-
2E10WLCP Two Emergency battery packs, 10W ing heights), dimming and switching photocell,
Linear Constant Power, Certified in CA pre-wired (LINK) ‡
Title 20 MAEDBS‡ Cord sets:‡
E15WLCP Emergency battery pack, 15W Linear CS1W Cord with NEMA 5-15P, 120V straight blade plug,
Constant Power, Certified in CA Title 18 gauge, 3 conductors, white, 6ft
20 MAEDBS‡ CS3W Cord with NEMA L5-15P, 120V twist lock plug, 18
OUTEND Cord set to exit endplate of fixture gauge, 3 conductor, white, 6ft
BAA Buy America(n) Act Compliant CS7W Cord with NEMA 7-15P, 277V straight blade plug,
nLight® Wireless ‡ 18 gauge, 3 conductors, white, 6ft
NLTAIR2 RLSXR10 nLight® Air Generation 2 enabled, 360° CS11W Cord with NEMA L7-15P, 277V twist lock plug, 18
low mount sensor, (7 to 15’ heights) gauge, 3 conductors, white, 6ft
(LINK) CS25W Cord with NEMA L24-20P, 347V twist lock plug,
NLTAIR2 RLSXR10EM nLight® Air Generation 2 enabled, 360° 18 gauge, 3 conductors, white, 6ft
low mount sensor, (7 to 15’ heights),UL CS97W Cord with NEMA L8-20P, 480V twist lock plug, 18
924 Emergency Operation, via power gauge, 3 conductors, white, 6ft
interrupt detection (not available with CS93W Cord only (no plug), 18 gauge, 3 conductors,
battery pack) (LINK) ‡ white, 6ft

Accessories: Order as separate catalog number.

HC36 M12 Hanger chain, 36" (1 pair) ZLR L24 SYM UPL WH 24" symmetric reflector with uplight, white finish
ZACVH M100 Adjustable 10' aircraft cable with Y hanger ZLR L24 SYM WH 24" symmetric reflector, white finish
(1 pair) ZLR L46 SYM UPL WH 46" symmetric reflector with uplight, white finish
ZLANGBKT Luma-tilt™ angle bracket for shelf or ledge ZLR L46 SYM WH 46" symmetric reflector, white finish
mounting only
ZLR L48 ASY WH 48" asymmetric reflector, white finish
SQ_ Swivel stem hanger (specify length in 2"
increments up to 48") ZLR L48 SYM UPL WH 48" symmetric reflector with uplight, white finish
NPP16D nLight® wired power/relay pack, 0-10VDC ZLR L48 SYM WH 48" symmetric reflector, white finish
dimming output (LINK) ZLR L92 SYM UPL WH 92" symmetric reflector with uplight, white finish
RPP20D nLight® air Generation 2 enabled, power/ ZLR L92 SYM WH 92" symmetric reflector, white finish
relay pack, 0-10V dimming output (LINK) ZLR L96 SYM UPL WH 96" symmetric reflector with uplight, white finish
LSXR Sensor Switch® LSXR occupancy sensor (LINK) ZLR L96 SYM WH 96" symmetric reflector, white finish
ZSPRG J2 Tong and T-grid hanger, for 15/16" T-grid UNIVERSAL REFL ALIGNER Universal reflector aligners, quantity 1
(Order quantity required in multiples of 2)
WGZ24 24" wireguard, white ‡
WGZ48 48" wireguard, white ‡

ZL1N

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 1-800-705-SERV (7378)  www.lithonia.com  [email protected] © 2013-2021 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 07/29/21
Page 2 of 7
ZL1N  LED Striplight
‡ Option Value Ordering Restrictions
Option value Restriction
2E7W Utilizes (2) Power Sentry PS750L emergency drivers. MVOLT required. Available with L92 or L96 only. Not available with L24, L46, L48, L92 6000LM, L96 6000LM
or any cordset that includes a plug.
2E10WLCP Utilizes (2) Power Sentry PS1055LCP emergency drivers. MVOLT required. Available with L92 or L96 with 10,000LM or 14000LM only. Not available with L24,
L46, L48, L92 6000LM, L96 6000LM or any cordset that includes a plug.
347, 480 Utilizes step down transformer.
Cord Sets Must specify voltage when plug is inlcuded. Cordsets exit back of fixture unless OUTEND option is specified.
E7W Utilizes Power Sentry PS750L emergency driver. MVOLT required. Available with L46, L48, L92 or L96 with 10000LM or 14000LM only. Not available with L24 or
any cordset that includes a plug.
E10WLCP Utilizes Power Sentry PS1055LCP emergency driver. MVOLT required. Available with L46, L48, L92 or L96 only. Not available with L24 or any cordset that
includes a plug.
E15WLCP Utilizes Power Sentry PS1555LCP emergency driver. MVOLT required. Available with L92 or L96 only. Not available with L24, L46, L48 or any cordset that
inlcudes a plug.
HTZL1N Tandem fixture ships as two L46 or L48 fixtures.
Available with MVOLT, 347 or 480 only. See ordering information on page 6 for more configurations. This sensor configuration is suitable for minimum ambient
Individual Controls temperature of 14°F (-10°C). See page 5 for low temperature option providing -4°F (-20°C) minimum ambient. When choosing Sensor and PLR for same fixture,
consult the factory. Sensors come prewired, they must be snapped into place at time of installation.
L24 Not available with 347V, 480V or emergency batteries.
nLight® Wireless See LINK in sensor description to RLSXR specification sheet for more configurations. When choosing a sensor and PLR for same fixture, consult the factory.
Sensors come prewired, they must be snapped into place at time of installation.
NLTAIR2 RLSXR10EM Not available with 347 or 480. MVOLT required.
Nominal Lumens See Operational Data on page 2 for actual lumens.
PLR _ _ Not available with cordset options. See ordering information on page 5. When choosing a sensor and PLR for the same fixture, consult the factory.
PLRLVG Not available with cordset options.
Reflectors Optional. Reflectors ship separately.
WGHZ24 Not available with ASR or SMR reflector options.
WGHZ48 Not available with ASR or SMR reflector options. Orde a Qty of 2 for L92 or L96 tandem fixtures.

ZL1N

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 1-800-705-SERV (7378)  www.lithonia.com  [email protected] © 2013-2021 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 07/29/21
Page 3 of 7
ZL1N  LED Striplight
OPERATIONAL DATA
Delivered Lumens 3000 Delivered Lumens 3500 Delivered Lumens 4000 Delivered Lumens 5000
Nominal K CCT @ 77°F (25°C) K CCT @ 77°F (25°C) K CCT @ 77°F (25°C) K CCT @ 77°F (25°C) Wattage
Length
lumen ambient temperature ambient temperature ambient temperature ambient temperature @ Comparable Light Source
(inches)
package 120V/277V
80 CRI 90 CRI 80 CRI 90 CRI 80 CRI 90 CRI 80 CRI 90 CRI
1500LM 24 1738 1409 1777 1467 1804 1494 1871 1528 15 1-lamp 17W T8
2500LM 24 2265 1846 2315 1900 2351 1947 2438 1991 19 1-lamp 17W T8
3500LM 24 3586 2924 3666 3026 3723 3084 3860 3152 31 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID
3000LM 46 or 48 3172 2586 3243 2677 3293 2728 3415 2788 25 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID
Lensed

5000LM 46 or 48 4417 3601 4515 3727 4585 3798 4754 3882 34 2-lamp 32W T8, 1-lamp 54W T5H0, 70W HID
7000LM 46 or 48 6535 5328 6681 5515 6785 5619 7035 5744 52 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID
6000LM 92 or 96 6561 5349 6708 5537 6812 5642 7063 5767 48 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID
10000LM 92 or 96 8687 7082 8881 7331 9019 7470 9351 7636 68 4-lamp 32W T8, 2-lamp 54W T5H0, 100W HID
14000LM 92 or 96 12457 10513 12735 10665 12933 10711 13409 10949 104 4-lamp 32W T8, 3-lamp 54W T5H0, 150W HID
1500LM 24 1881 1534 1923 1588 1953 1618 2025 1654 15 1-lamp 17W T8
2500LM 24 2452 1999 2506 2069 2545 2108 2639 2155 19 1-lamp 17W T8
3500LM 24 3882 3165 3969 3276 4031 3338 4179 3412 31 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID
3000LM 46 or 48 3434 2800 3511 2898 3565 2953 3697 3019 25 1-lamp 32W T8, 1-lamp 54W T5H0, 50W HID
Unlensed

5000LM 46 or 48 4781 3898 4888 4035 4964 4111 5147 4203 34 2-lamp 32W T8, 1-lamp 54W T5H0, 70W HID
7000LM 46 or 48 7075 5768 7233 5971 7345 6083 7616 6219 52 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID
6000LM 92 or 96 7103 5791 7261 5995 7374 6108 7646 6243 48 3-lamp 32W T8, 2-lamp 54W T5H0, 100W HID
10000LM 92 or 96 9404 7667 9614 7937 9764 8087 10123 8266 68 4-lamp 32W T8, 2-lamp 54W T5H0, 100W HID
14000LM 92 or 96 13485 10994 13786 11381 14001 11596 14516 11853 104 4-lamp 32W T8, 3-lamp 54W T5H0, 150W HID

PROJECTED LUMEN Operating Hours 0 15,000 30,000 45,000 60,000 100,000

MAINTENANCE Lumen Maintenance Factor 1 0.94 0.89 0.83 0.79 0.67

DIMENSIONS PALLET DIMENSIONS

All dimensions are shown in inches (centimeters) unless otherwise noted. 92
(234) Length Approximate weight Fixtures per pallet Approximate pallet dimensions (L x W x H)
Specifications subject to change without notice.
2-1/8
46
(117)
46
(117) 2 18_
(5.4) (5.4)
L24 7 lbs. 408 46" X 51" X 32 11/16"
2 18_
(5.4)
L46 11 lbs. 176 46" X 51" X 32 1/16"
L48 12 lbs. 176 46" X 51" X 31 3/8"
L92 22 lbs. 176 46" X 98 1/2" X 31 1/16"
46
2-1/8
23 (58) 23
2-1/8
L96 24 lbs. 176 46" X 98 1/2" X 31 1/16"
(5.4)
(58) (58) (5.4)
2-1/8
(5.4)

92
(234)
46 46
2-1/8 (117) (117) 2 18_
(5.4) (5.4)
2 18_
48 48 (5.4)
2-1/8 (122.0)
48 (122.0)
48 2-1/8
(5.4)
2-1/8 (122.0)
48 (122.0)
48 (5.4)
2-1/8
(5.4)
2-1/8 (122.0) (122.0) (5.4) 2-1/8
2-1/8
(5.4) (5.4)
(5.4) 2-1/8
96 (5.4)
2-1/8
(244.0)
96 (5.4)
(244.0)
96
(244.0)
46
23 24 (58) 23 24
2-1/8
2-1/8 (58) (61.0)
24 (58) (61.0)
24 2-1/8
(5.4)
(61.0) (61.0) (5.4) 2-1/8
(5.4)
2-1/8 24 24 (5.4)
2-1/8
2-1/8
(5.4) (61.0) (61.0) (5.4)
(5.4)
2-1/8 2-1/8 2-1/8
(5.4)
Knockout hole is .86in in diameter.
(5.4) (5.4) 2-1/8
48 (5.4)
2-1/8
(122.0) 2-1/8"
48 (5.4) 2-3/16" (5.39)
(122.0) (5.56)
2-3/16" 2-1/8"
48 (5.39)
(122.0) (5.56)
2-3/16" 2-1/8"
(5.39)
12 12 Mounting Hole Location - All Lengths 2-1/8"
(5.56)
(30.5)
12 (30.5)
12 (5.39)
2-1/8 (30.5) 2-1/8 2-1/8" 2-1/8"
(5.4)
2-1/8 12 (30.5)
12 (5.4) (5.39) (5.39)
2-1/8 2-1/8" 2-1/8"
(5.4) (30.5) (30.5) (5.4) 2-1/8 (5.39) (5.39)
2-1/8 2-1/8 (5.4) 2-1/8"
(5.4) (5.4) 2-1/8 (5.39)
24 (5.4)
(61.0)
24
2-1/8
(5.4)
1.50
(61.0)
24
(61.0)
PHOTOMETRICS
Please see www.lithonia.com

ZL1N

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 1-800-705-SERV (7378)  www.lithonia.com  [email protected] © 2013-2021 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 07/29/21
Page 4 of 7
ZL1N  LED Striplight

REFLECTORS (Optional)
L24 Reflector

3.67

24.00 10.70

L48 Reflector
3.67
10.70
48.00

L96 Reflector
3.67
96.00 10.70

PHOTOMETRICS
Please see www.lithonia.com

PRODUCT INFORMATION Wiring

Advanced plug-in system with two-circuit capability. Available on industrial and strip products and a variety of architectural products

PLR
mounted in continuous rows. 1, 2, 3 and 4-lamp fixtures. PLR22 (2-circuit) and crossover harness switches hot circuit serving next fixture
in row. Reduces fixture types on job for alternating circuit applications (see example below.)
Easy one-step installation, saves up to 35% on labor costs. Expanded switching flexibility helps save energy.
Rows can be 50% longer with two-circuit systems. Polarized, lock-together nylon connectors prevent miswiring in the field. #12 THHN
conductor, rated 600V, 90°C. White neutral wire included. Grounding accomplished by fixture in-row connectors.
CSA certified systems available with up to 2 circuits. G ground required. Advanced 1 or 2-Circuit Plug-In
Note: Specifications subject to change without notice.

ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative.

Series Number of hot wires Branch circuits Dimming Ground

PLR (blank) Not required for 22 Circuits to which ballast is connected Emergency circuit connected LV Low-voltage G Ground, required
PLR22 1 Black (blank) Not required for 22 or PLR1 (blank) No emergency circuit dimming
2 Black and red A Black wire ELA Emergency circuit wired to black wire
B Red wire ELB Emergency circuit wired to red wire

Typical Applications
• Multiple-circuit and single-circuit for longer continuous rows
• Multiple-circuit with alternating fixtures on separate circuits, 2-circuit (PLR 22)
• Multiple circuit with night-lights located along row as desired

ZL1N

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 1-800-705-SERV (7378)  www.lithonia.com  [email protected] © 2013-2021 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 07/29/21
Page 5 of 7
ZL1N  LED Striplight
LSXR – Fixture Mount Occupancy Sensor (see LSXR Comparable Old style sensor
configuration CMRB sensor nomenclature
www.AcuityControls.com for additional information)
• Three interchangeable lens options to satisfy multiple mount- For shortest lead times use one of the following LSXR configurations
ing heights and coverage pattern requirements. LCOZU CMRB 50 MSI
• Integrated mounting bracket drops lens down 3” from chase LCH0SZU CMRB 50 D MSID
nipple.
LCPZU CMRB 50 P MSIPED
• Single or dual relay versions — designed with robust protection
from the harsh switching requirements of T5 and LED loads. LAOZU CMRB 6 MSI360
• Photocell and 0-10VDC dimming options. LAH0SZU CMRB 6 D MSI360D
• No PIR field calibration or sensitivity adjustments required.
LAPZU CMRB 6 P MSI360PED
• Sensor ambient temperature rating of 14°F (-10°C) to 131°F
(55°C).

SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME. CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS.
SINGLE RELAY
ORDERING INFORMATION Example: LAH0SZU

Default occupancy
Series Lens option Dimming/Photocell Max. dim level Min. dim level Temp/Humidity time delay

L LSXR passive A High mount, O None1 0 10 VDC S Minimum dim Z None I 30 sec
infrared indoor 360° H High/low occupancy 9 9 VDC level of ballast T Low temperature2 D 2.5 min
occupancy sensor B Low mount, operation 1 1 VDC
8 8 VDC X 5.0 min
360° P Switching photocell 2 2 VDC
7 7 VDC R 7.5 min
C High mount (on/off)1 3 3 VDC
aisleway U 10.0 min
M Dimming and 4 4 VDC (with minimum 15
switching photocell minute on time)
5 5 VDC
G Dimming and V 15.0 min
switching photocell 6 6 VDC
with high/low oc- W 20.0 min
cupancy operation Y 30.0 min

Notes
1 Max and min dim levels not applicable with this option.
2 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

DUAL RELAY (Available with 120, 277, and 347V only)

ORDERING INFORMATION Example: LA2KZU

Series Lens option Poles Operating mode Temp/Humidity Default occupancy time delay

L LSXR passive infrared A High mount, 360° 2 Dual relay J None Z None I 30 sec
indoor occupancy sensor B Low mount, 360° K Alternating off relays (promotes even lamp wear) T Low tempera- D 2.5 min
C High mount aisleway O Alternating off relays w/photocell ture1 X 5.0 min
P Switching photocell(on/off) R 7.5 min
E Photocell on/off (pole 1 only) U 10.0 min (with minimum
F Photocell on/off - both poles (dual set-point) 15 minute on time)
V 15.0 min
W 20.0 min
Y 30.0 min

Example: LENS 50 J100 Notes

1 Ambient temperature rating of -4°F (-20°C) to 131°F (55°C).

Replacement lenses: Order as separate catalog number.

Series Lens type Package quantity

LENS 6 High mount 360° [blank] Single Lens
10 Low mount 360° J10 10-pack
50 High mount aisleway J100 100-pack

ZL1N

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 1-800-705-SERV (7378)  www.lithonia.com  [email protected] © 2013-2021 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 07/29/21
Page 6 of 7
ZL1N  LED Striplight
OPTIONS AND ACCESSORIES
The Z Series fixture offers numerous options for almost every electrical and optical component, including a long list of field-installable accessories.

HANGER CHAIN Z SPRING HANGER

36" chain with Y hanger. Snap ‘n’ lock design requires no fasteners and can
be used on T-grid ceiling or universal mounting
systems.
Order as:
HC36
Order as:
ZSPRG

ZACVH HANGER ANGLE MOUNTING BRACKET

10' Aircraft cable with Y hanger. Luma-tilt™ angle bracket ships as a pair

Order as: Order as:

ZACVH ZLANGBKT

WIRE GUARD

Order as:
WGZ24
WGZ48

ZL1N

INDUSTRIAL:  One Lithonia Way, Conyers, GA 30012  Phone: 1-800-705-SERV (7378)  www.lithonia.com  [email protected] © 2013-2021 Acuity Brands Lighting, Inc. All rights reserved.  Rev. 07/29/21
Page 7 of 7