Randall Warranty

DIAVLO 1 watt & 5 watt Amplifier Models

Randall Amplifiers, a Division of U.S. Music Corporation warrants the product
you have purchased to be free of defects in materials and workmanship in normal
use for a period of two (2) years from the date of original purchase. This warranty
RD1H = 1 Watt head with (1) 12AU7 Power & shall run to the original purchaser when purchased from an Authorized Randall
(2) 12AX7 Preamp tubes Dealer. The manufacturer warrants speakers for a period of (1) years. The

A M P L I F I E R S
manufacturer warrants tubes for a period of (90) days. Defective parts found
during the applicable warranty period with proof of purchase will be replaced or
repaired without charge if the complete product is returned to US Music Corp or
RD5H = 5 Watt head with (1) 6V6 Power & (2) any Authorized Randall Service Center within the U.S.A. Randall reserves the
12AX7 Preamp tubes right to use materials readily available at the time of the repair. All Warranty
service requires Proof of Purchase (sales receipt) to be presented at time of service
request. Any repair or service performed by any person of entity other than an
RM50/RM80
Authorized Service Center is not covered by this limited warranty. The customer
RD5-112 = 5 Watt Combo with (1) 12” 50w pays transportation to and from Randall factory service or any Randall Authorized
M ODULAR TUBE CO M BOS
RS-12-50-8 speaker, steel grill. Service Center. Rental stock is warranted for (1) year from date of invoice to the O W N E R S M A N U A L
Authorized dealer. Warranty on rental units is not transferable.

What is covered against manufacturing defects

Gain + Tone + Master Volume
Parts and Labor to correct any defect in materials used and any defect attributable
to workmanship.

T.S.S. 3 way “tone stack shift” What is not covered:

Shipping Damage. Report damage upon receipt of item to the carrier (i.e. UPS).
Class A discrete unity gain instrument level Freight carrier must be notified upon receipt of items to insure freight damage
claim resolution. Shipping damage not filed with carriers within (48) hrs upon
effects loop receipt will not be covered under warranty. Report any shipping damage within
(48) hrs of receipt to the Randall Customer Service Dept at 1-800-877-6863, ext.
5120. Keep all original documents and packing materials to insure freight damage
Speaker emulated XLR output with Ground claim resolution. Merchandise that has been modified after original shipment from
lift and silent operation the Randall factory. Products whose serial numbers have been altered or removed.
Exterior normal wear and tear damage to the finish due to misuse, operation

Models:
outside the specified ratings, neglect or accident. Warranty claims by anyone other
than the original purchaser. Randall is not responsible for any items left in
protective covers or cases, (We strongly advise that all personal items such as
chords, cables, tuners, etc… be removed!) freight charges to and from the factory
or an Authorized service center on customer owned goods, any and all charges

RD1H/RD5H
incurred from priority service requests (Rush Service) or priority shipping for
replacement parts. Any and all charges if no problem is found.

Return Authorization

All items being returned for any reason must have a Return Authorization

RD5-112
number. This RA# must be placed on the outside of the carton of the item being
returned or the carton will be refused upon delivery. Please call the customer
service department at 1-800-877-6863, ext. 5120, for the return authorization

OPERATION
number. Dealer stock items will be returned to the dealer freight prepaid.

An Authorized Warranty Service Center must perform any and all field warranty
service work. Customer will not pay for parts and/or labor provided the problem
found is within warranty guidelines. Proof of purchase must be provided at the

MANUAL
time of service request. Transportation charges to and from the Authorized
Warranty Service Center are the responsibility of the customer. Rush service
charges and special freight charges for required parts are not covered under
warranty and are also the responsibility of the customer. If a unit is not easily
transported to an authorized service center, the customer is responsible for
technician travel charges. Any charges for labor or processing when no problem is
found are also not covered under warranty. Any charges incurred for work
performed by an unauthorized service center are the responsibility of the
customer.

Please visit our website
Warranty terms may very per country, check warranty
terms with local Distributor or at point of purchase. www.randallamplification.com
 Congratulations on the purchase of your new RANDALL RD SERIES Amplifier! We at Randall Amplification appreciate that you chose our brand of guitar instrument
amplifiers and wish you years of great tone and enjoyable playing time with your new machine. Please review the safety instructions and be aware that the documentation
provided in this manual references 120volt USA versions of the models covered. Note that the POWER listed on the power supply should be for your countries’ power standard.

GAIN KNOB - This knob works as

!
T.S.S. - Stands for “Tone Stack Shift” 3-way Midrange frequency variance switch.

•Left- Midrange boost, with flat bass response and rolled off highs....great for smooth
TONE KNOB - This is
VOLUME KNOB - Overall
volume output control. This
an overall tonal sweep. feeds the speaker output
an aggressive all tube overdrive burning lead tones Turn to the left for more and balanced XLR speaker
circuit. It dynamically responds with bass (low frequencies)
•Center- The stock position with an even bass, mid, and treble response....perfect for emulator output.
more overdrive as more input is fed and less treble (high
from your pickups. Turn to the right Rock Note that to achieve cleaner
frequencies) tones, turn volume all the
for more saturation. For cleaner
•Right- Midrange scoop, with a boosted bass and treble response...perfect for metal way up and use GAIN
tones, keep at lowest setting, turn
volume all the way up and use gain KNOB as volume control.
knob as volume output control.

The Power
1/4” Guitar input - switch turns
Plug your guitar into the unit on
this jack/connector. and off.

POWER CABLE:
Note that this unit will
only operate safely in
the country or region
in which it is sold.
please contact your
local Randall
distributor or dealer if
you are unsure of
mains voltage.

Speaker output - plug any (8 ohm or

greater) speaker cabinet into this jack. Class A Discrete instrument
level effects loop send. This
(already connected on combo models) XLR Balanced output is signal fed from the Class A Discrete instrument level plugs into external pedal
XLR ground lift
output transformer including signal from the effects loop return. This plugs into effects unit input and feeds
For silent operation leave speaker changes the ground
output tube. This signal is then sent through external pedal effects unit output signal from the Gain and Tone
output unplugged. All of the functions connection to fix
the speaker emulator which simulates the to complete signal “loop”. Also knobs. Also serves as
of the amplifier will operate as normal ground loops when
sound and response of a mic’d up Randall serves as power amp input so unbalanced preamp output
except the speaker output. Note that interfacing with other
4x12 speaker cabinet. This function is useful external preamp can be plugged send but will mute output
the amplifier has internal resistor to equipment - use at
for direct (silent) recording, Direct send to PA/ directly to power amp section with unless return jack receives
offer simulated speaker impedance quietest setting for
FOH for silent stages, in ear monitor feed or active volume control and speaker return signal.
best performance.
send to external power amp. emulator XLR output.