Elite RS: VF0850-xx VF0860-xx

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Elite RS VF0850-xx (1 Loop)

Analog Addressable VF0860-xx (2 Loops)


Fire Control Panels
where xx = 10 for Red & 40 for Gray
(1 or 2 Loops)
Apollo Protocol

Standard Features Product Overview


One full SLC circuit expandable to two Elite RS is a versatile range of open
protocol fire alarm control panels
3 programmable relays compatible with existing Elite fire alarm
5.25A power supply panel technology.

Large graphic display Available with one or two detection loops


Real time clock for a total of 250 primary SLC points or
up to 400 points using addresses and
Compatible with eMATRIX graphics subaddresses. Elite RS uses leading
annunciator
edge microprocessor based electronics
Powerful, network wide cause and to provide a flexible control system with
effects (500 total). Fully user high reliability and integrity.
programmable by point or zone.

Can be networked with additional RS Suitable for all small to medium sized fire
and/ or Elite control panels detection systems, Elite RS control panels
Compatible with eVIEW Annunciator can be expanded and networked to
become part of much larger systems if the
Programmable through a PC need arises, therefore providing a future
connection to the panel
proof solution for any installation.
Same look and feel as Elite range
With its large graphical display and
Stores 1000 last events in history log
ergonomic button and indicator layout,
Model ranges include with or without a the Elite RS control panel is simple
Dual-Line internal DACT and straightforward to understand for
Compact, stylish enclosure installers, commissioning engineers and
end users alike.
Available in Red or Gray

APPROVED
Manufactured by Kentec Electronics Ltd.
2 Programmable NAC circuits with
internal synchronization support.
Dartford, DA11JQ, United Kingdom

VES Fire Detection Systems, Tel (US): 800.270.3066 (Toll free) Tel (non US): (001) 610.992.3378 E-mail: [email protected]
620 Allendale Road, King of Prussia, PA. 19406 Fax: 610.992.3380 Web: www.ves-network.com
Added Features: Technical Specifications
Elite RS with Internal Modem/ Construction: 16AWG sheet steel
Dimensions: 14.5”W x 18.9”H x 4.25” D
DACT (VF0856-xx/VF0866-xx)
Dual line digital communicator and modem Weight (without batteries): 20lb
Central Station reporting; SIA and Contact ID Finish (lid & box): RAL3002 (Red) or BS 00 A 05 (Gray)
On-board loop start terminal connections for both Finish (product labels): BS 00 A 05 (Gray)
primary and secondary Telco lines
Mains voltage supply: 115 or 230V AC 50 or 60 Hz.
(specify when ordering, default is 115V)
Also available: Mains supply fuse: 1.6A 250V
Power supply DC rating: 24V 5.25 Amps
eNET Networking Card - VF1170-00
Aux 24V supply: Fused at 500 milliamps
1 loop expansion board - VF1054-00
Battery (24 hour standby): 9Ah 12V (2 per panel) (non-networked)
Trim ring - VF1071-xx
Fault contact rating: 30V DC 1 Amp
Fire contact rating: 30V DC 1 Amp
Alarm contact rating: 30V DC 1 Amp
NAC output rating: 3.1V across both channels, 2.3V across any one
Detection loop: 250 milliamp output
Serial expansion port: Serial RS485
PC port: Serial RS232
Network connection: Optional network Cards allow the use of e-Net
networking or VESnet networking
NAC Synchronization: Internal Support
NAC Protocols: System Sensor, Wheelock, Gentex, Amseco

VES Fire Detection Systems, Tel (US): 800.270.3066 (Toll free) Tel (non US): (001) 610.992.3378 E-mail: [email protected]
620 Allendale Road, King of Prussia, PA. 19406 Fax: 610.992.3380 Web: www.ves-network.com

You might also like