Form-092-Excavator Safety Checklist

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Form-092

Excavator Safety Checklist


Rev.: AC Date: 19 03 2018

PJT site: Subcontractor: Register No.: Inspection date:



③ ①

⑨ ⑦
⑧ ⑤

no. part Item inspection method S S M T W TH inspection photo

Safety Lever shouldn't have any deformation


① lever and when lever is pulled, all operation
should be stopped

Operators Operators Safety Induction Form


② Induction should be signed by the operator. Safety lever Rear view
form camera

Controller Controller, clutch and brakes should


③ / brake work fine and seat belt needs to be
attached

Hydraulic There shouldn't be any leakage,


④ device and damage and abrasion on hydraulic Hydraulic line
Rear
cylinder motor, cylinder and pipes

Slewing Fixing bolt of slewing device should


⑤ device have abnormalities like loosened part
(Turn table)

Track & Track or wheels (tire) should not have


⑥ Wheel(Tire) any problems such as cracks, Travelling device
Turn table
deformation or damage

Counter Do not add extra weights and


⑦ weight connection status of fixing bolts and
nuts should be fine

Use standard bucket, safety pin should


⑧ Bucket & be properly installed. safety pin
Counter weight
Screens
All screen curtains & view obstructions
should be removed operators cabin.

Reverse Alarm ,Beconlights,Head, rail,


⑨ Lamps & fog, mars light should work normally,
Alarms

Other Side footboard , protection facility for


⑩ safety driver's seat, limit switch for crash
device protection should be in safe condition Lamp Collision
avoidance
Inspector Name: (signature) (s
Site Engineer

Page 1 of 2 M3-FST-FOR-HSE00-GEN-000092
Page 2 of 2 M3-FST-FOR-HSE00-GEN-000092

You might also like