TECHNOLOGY

IN MOTION

INDUSTRIAL

SMT Series POWER GEN

Dry & submersible screw pumps

for industrial applications - 80 bar pressure

WIND ENERGY

www.settima.it
 Applications / Applicazioni

Options are indicatory for applications. Please, always contact Settima Technical dept. / Le opzioni sono indicative per
ogni applicazione. Prego controllare sempre con l’Ufficio Tecnico Settima.

High viscosity Body material Screw material Seals

Elevate viscosità Materiale corpo Materiale viti Tenute

Power units, Presses, Machine tools, PIMMs,

Metal & Steel (coolant fluid, transfer and filtration),
Hydraulic Power to Control the Governor, Wicket Gates, Hydro Propel-
lers, Filtration & Oil transfer,
Off-line filtration, Off-shore platforms,
- -/G -/HA -/TM
Process charge (feeding and boosting),
Hydraulic braking systems, Oil jacking,
Hydro power (turbines & compressors lubrication),
Control oil service, Chemical metering, Cranes,
Hydraulic pitch control, Yaw control

Chemical processing (dosing, transfer,

high temperature and hazardous fluids), SN G/GZ HA/HD TM/FGM
Sealing oil service for gas turbine

Paper & Pulp (rotating equipment lubrication)

Lube oil (circulation & transfer), Turbine Shaft jacking,
Rotor jacking, Ball Mill Gearbox lubrication, SN - - TM
Gear box lubrication & filtration (high viscosity lube, air emulsion),
Forced lubrication systems

Building & Construction (hydraulic lifts & elevators) - G - -

Mining (fuel oil transfer, bar mill lubrication) - G * *

Fuel unloading, Forwarding, Transfer and Feeding

Burner operations service,
Fuel service (boosting & transfer),
- G/GZ HA TM
Oil rigs, refineries (transport, meter and mix),
Pipelines re-injection, Tank loading & unloading
Process charge, Boiler injection

Oil filtration & Cooling systems - - - *

Tool machines high pressure coolant - G/GZ HA TMK

All data reported by this catalogue can change without any notice / I dati presenti nel catalogo possono cambiare senza preavviso.
*Standard configuration and material / Configurazione e materiali standard.

2
 Technical characteristics / Caratteristiche tecniche

Types Dry (SMT) or submerged (SMIT)

Tipi Esterno (SMT) o sommerso (SMIT)
Models / Modelli 20 – 25 – 32 – 40 – 45 – 55 – 60 – 70 – 80 - 90
Installation Free for SMT. Submerged (totally or partially) for SMIT
Installazione Qualsiasi per SMT. Sommersa (parzialmente o completamente) per SMIT
Flanges / Flange ISO 3019/2
Connections / Connessioni SAE 3000 - BSPP
Drive loading No axial or radial loads
Carichi Nessun carico assiale o trasversale
Shaft rotation Clockwise (from shaft end) , (suitable also for counter clockwise rotation)
Rotazione albero Destra (disponibile anche per rotazione sinistra)
Shaft speed From 500 to 3.600 rpm(1)
Velocità di rotazione Da 500 a 3.600 rpm(1)
Flows From 4 up to 1.220 L/min
Portate Da 4 a 1.220 L/min
Outlet Pressure Up to 80 bar
Pressione di mandata Fino a 80 bar
Inlet Pressure Min. -0.7 bar max. 3 bar(2)
Pressione in aspirazione Min. -0.7 bar max. 3 bar(2)
• Mineral oil HLP e HVLP
• Oli minerali HLP e HVLP
• Ecologic fluids HETG, HEPG, HEE
• Fluidi ecologici HETG, HEPG, HEE
• Synthetic fluid or emulsion: HFA oil-water emulsion,
• Fluidi sintetici o emulsioni: HFA emulsione olio-acqua, HFB
HFB water-oil emulsion 40% of volume, HFC water/
emulsione acqua-olio 40% dl volume, HFC acqua/glicole –
glycole – water max 35 to 55%, HFDR phosphate
acqua max 35 to 55%, HFDR phosphate ester
Fluids(3) ester
• Olio ad alta viscosità per lubrificazione
Fluidi(3) • Lubrication high viscosity oils
• Fluidi speciali sintetici: MIL-H, SKYDROL,
• Special synthetic fluid: MIL-H, SKYDROL,
• Fuel oil: MGO, MDO, Basso livello di zolfo MDO e HFO
• Fuel oil: MGO, MDO, Low sulfur MDO and HFO
• DMX (ISO8217), DMA, DMB, DMC, DMZ
• DMX (ISO8217), DMA, DMB, DMC, DMZ
• Bunker oil, furnace oil, olio per motori, heating oil, olio
• Bunker oil, furnace oil, engines oil, heating oil,
idraulico DIN 51524
hydraulics oils DIN 51524
Viscosity From 1 up to 100.000 cSt(4)
Viscosità Da 1 fino a 100.000 cSt(4)
Seals polymer (shaft, O-ring)
Polimero guarnizioni (albero, anello NBR, FKM, EPDM (5)
di tenuta)
Seal type TM, TMK, TMZ, FGM
Tipo di tenuta
Acoustic Emissions From 52 up to 68 db(A) at 2.950 rpm (value based on ISO 4412 test procedure)
Emissioni Acustiche Da 52 fino a 68 db(A) a 2.950 rpm (ISO 4412 test)
Pump body Extruded aluminum alloy
Corpo pompa Alluminio estruso
Pump body (special applications) Cast iron, carbon steel.
Corpo pompa (applicazioni speciali) Ghisa, acciaio.
Screws Steel for main screw , idler cast iron
Viti Acciaio vite principale, ghisa viti secondarie
Screws (special applications) Core hardened steel screws, surface treated screws
Viti (applicazioni speciali) Viti in acciaio temprato, viti trattate superficialmente
Environment temperature From -50° up to +60°C
Temperatura ambiente Da -50° a +60°C
Hydraulic Temperature From -50°C up to +300°C
Temperature olio Da -50°C a +300°C
Filtration Permissible degree of fluid contamination NAS to 1638 class 10 or ISO DIS 4406 – 19/16. Recommended filtration ß 25 ≥ 75
Filtrazione Contaminazione NAS tipo 1638 classe 10 o ISO DIS 4406 – 19/16 . Filtrazione raccomandata ß 25 ≥ 75

All data reported by catalogue can change without any notice. I dati presenti nel catalogo possono cambiare senza preavviso.
(1) For shaft speed lower than 1.000 rpm and over 1.800 rpm please contact Settima. Per velocità inferiori a 1.000 rpm e maggiori di 1.800 rpm contattare Settima.
(2) For higher pressure please contact Settima. Per pressioni maggiori contattare Settima
(3) For request of different fluids please contact Settima. Per l’utilizzo di diversi fluidi contattare Settima.
(4) For level of viscosity lower than 20 cSt and over 320 cSt please contact Settima. Per livelli di viscosità inferiori a 20 cSt e superiori a 320 cSt contattare Settima.
(5) For special seals, contact Settima. Per tenute speciali, contattare Settima.

3
 Product description / Descrizione prodotto

Exploded drawing / Disegno esploso

Front flange and suction ports configurations / Configurazione flange e porte di aspirazione

7
10 4
E
8
6 A 17
8 16

4
F
9

7
6 B 8
16 18
8 12
1

2
3

5
11

4
7 10
G
8

8
6 C 16
19

4
7
9
H
8 6 D 21
20
14 2
13
15 8

4
Product description / Descrizione prodotto

N° PARTS DESCRIPTION / DESCRIZIONE COMPONENTI

1 Pump body / Corpo pompa Common components
2 O-ring / Anello O-ring Common components
3 Main screw / Vite centrale Common components
4 Idler screw / Vite laterale Common components
5 Ball bearing / Cuscinetto Common components
6 Seeger Common components
8 Screw / Vite Common components

SHAFT AND SEAL OPTIONS / OPZIONI ALBERI E TENUTE

A SMT LIP SEAL / SMT TENUTA A LABBRO
9 Key / Linguetta Common components
10 Seal / Anello di tenuta Common components
7 Flange / Flangia Common components
B SMT MECHANICAL SEAL - TM OPTION / SMT TENUTA MECCANICA - OPZIONE TM
9 Key / Linguetta Common components
11 Mechanical seal /Tenuta meccanica Common components
12 Driving oil bushing / Boccola convoglia olio Common components
7 Flange / Flangia Common components
C SMT HOLLOW SHAFT (LIP SEAL) - AC OPTION / SMT ALBERO CAVO (TENUTA A LABBRO) - OPZIONE AC
10 Seal / Anello di tenuta Common components
7 Flange / Flangia anteriore Common components
D SMT MAGNETIC COUPLING - FGM OPTION / SMT GIUNTO MAGNETICO - OPZIONE FGM
9 Key / Linguetta Common components
7 Flange / Flangia Common components
2 O-ring / Anello O-ring Common components
13 Internal rotor MC / Rotore interno MC Common components
14 Containment shroud MC / Cappuccio MC Common components
15 External rotor MC / Rotore esterno MC Common components

SUCTION PORTS OPTIONS / OPZIONI PORTE DI ASPIRAZIONE

E SMT RADIAL SUCTION COVER / SMT TAPPA RADIALE
16 Plane gasket / Guarnizione piana Common components
17 Radial suction cover / Tappa radiale Common components
F SMT AXIAL BSPP - AX OPTION / SMT ASSIALE BSPP - OPZIONE AX
16 Plane gasket / Guarnizione piana Common components
18 Axial suction cover / Tappa assiale Common components
SMT TOP FLANGE FOR VERTICAL INSTALLATION OVER TANK - AL OPTION /
G
SMT TAPPA ASPIRAZIONE PER INSTALLAZIONE VERTICALE SOPRA SERBATOIO - OPZIONE AL
16 Plane gasket / Guarnizione piana Common components
19 Tank top flange / Tappa aspirazione sopra serbatoio Common components
H SMIT SUBMERSIBLE / SMIT SOMMERSA
20 Filter / Filtro Common components
21 Clamp / Fascetta Common components

5
6
P D

SMT Pump

SMT Series / Serie SMT

Dry screw pump
Pompa per uso esterno

SMIT Pump
SMT pump - Dimensional drawings / Disegni dimensionali

SMIT Series / Serie SMIT

Submersible screw pump
Pompa per uso sommerso
 SMT SMIT

Dry screw pump / Submersible screw

Pompa per uso esterno pump/Pompa per uso
sommerso

Flange Shaft Suction Discharge Pump Pump

Flangia Albero Aspirazione Mandata Pompa Pompa

Type/Tipo ØF2 ØY ØF3 ØF1 PL ØD CA CH IN-Rd IN-Ax H2 OUT H1 PA ØD1 ØD2 L1 L2 LD LA Kg ØD3 LF

GR20 SMT
1/2” 1/2” 1/2”
8L-12L-15L-20L- 80.0 11.0 103.0 125.0 30.0 14.0 16.0 5.0 26.0 25.0 37.0 59.0 59.0 53.0 118.5 193.0 174.0 1.5 60.0 173.0
BSPP BSPP BSPP
23L

GR25 SMT 3/4” 3/4” 1/2”

80.0 11.0 103.0 125.0 36.0 19.0 21.5 6.0 27.0 27.5 42.0 65.0 65.0 72.5 171.0 262.0 262.0 4 66.0 242.5
25L-30L BSPP BSPP BSPP

GR32 SMT 1” 1/4 1”

1” 1/4
35L-45L-55L- 100.0 11.0 125.0 150.0 35.0 19.0 21.5 6.0 SAE - 55.0 SAE - 41.0 41.0 96.0 94.0 69.0 192.0 295.0 248.0 6.5 95.0 239.0
BSPP
75L 3000 3000

1” 1/2 1” 1/4
GR40 SMT 1” 1/2
125.0 14.0 160.0 188.0 34.0 19.0 21.5 6.0 SAE - 65.0 SAE 46.5 39.5 112.0 108.0 84.5 224.5 348.0 302.0 10.8 109.0 294.0
100L-125L-150L BSPP
3000 -3000

2” 1” 1/2
GR45 SMT 2”
125.0 14.0 160.0 188.0 55.0 32.0 35.0 10.0 SAE - 85.0 SAE 51.5 64.5 125.0 122.5 89.0 248.0 382.0 330.0 15 123.5 312.0
180L-210L BSPP
3000 -3000

GR55 SMT 2” 1/2 2”

2” 1/2
250L-300L- 160.0 18.0 200.0 235.0 55.0 32.0 35.0 10.0 SAE - 95.0 SAE - 55.0 61.5 148.0 142.5 100.5 297.0 449.5 385.5 23.5 143.5 395.5
BSPP
330L-380L 3000 3000

3” 2” 1/2
GR60 SMT 3”
160.0 18.0 200.0 235.0 55.0 32.0 35.0 10.0 SAE 105.0 SAE - 63.0 65.5 160.0 155.0 101.0 342.0 505.5 423.5 30 154.0 430.5
440L-500L BSPP
-3000 3000

3” 1/2 3”
GR70 SMT 3” 1/2
200.0 22.0 250.0 300.0 55.0 32.0 35.0 10.0 SAE - 110.0 SAE - 73.0 60.5 180.0 180.0 115.5 422.0 605.5 529.5 44 179.0 543.5
600L-660L-800L BSPP
3000 3000
SMT pump - Dimensional drawings / Disegni dimensionali

4” 3”
GR80 SMT 4”
200.0 22.0 250.0 300.0 60.0 38.0 41.0 10.0 SAE - 125.0 SAE - 83.0 75.0 210.0 210.0 150.0 470.5 695.0 644.0 59 204.0 628.0
1.000L-1.200L BSPP
3000 3000

4” 3”
GR90 SMT 4”
200.0 22.0 250.0 300.0 60.0 38.0 41.0 10.0 SAE - 125.0 SAE - 83.0 75.0 210.0 210.0 150.0 470.5 695.0 644.0 61 204.0 628.0
1.220L BSPP
3000 3000
All data reported by catalogue can change without any notice. I dati presenti nel catalogo possono cambiare senza preavviso.

7
8
SMT AC Pump
D

SMT AC Series / Serie SMT AC

Dry screw pump
Pompa per uso esterno

SMIT AC Pump
SMT AC pumps - Dimensional drawings / Disegni dimensionali

SMIT AC Series / Serie SMIT AC

Submersible screw pump
Pompa per uso sommerso
 SMT AC SMIT AC

Dry screw pump / Submersible

Pompa per uso esterno screw pump/
Pompa per
uso som-
merso
Flange/Flangia Shaft / Albero Suction / Aspirazione Discharge / Mandata Pump / Pompa Pump / Pompa

Type/Tipo ØF2 ØY ØF3 ØF1 ØD CA CH IN-Rd IN-Ax H2 OUT H1 PA ØD1 ØD2 L1 L2 LD LA Kg ØD3 LF

GR20 SMT AC11 B5

95.0 9.0 115.0 140.0 11.0 12.8 4.2 1/2”BSPP 1/2” BSPP 26.0 1/2” BSPP 25.0 25.0 59.0 59.0 57.0 118.5 197.0 178.0 1.5 60.0 177.0
8-12-15-20-23
GR20 SMT AC14 B5
110.0 9.5 130.0 160.0 14.0 16.1 5.2 1/2”BSPP 1/2” BSPP 26.0 1/2” BSPP 25.0 33.5 59.0 59.0 56.0 118.5 196.0 177.0 1.5 60.0 176.0
8-12-15-20-23
GR20 SMT AC19 B5
130.0 11.0 165.0 200.0 19.0 21.7 6.5 1/2”BSPP 1/2” BSPP 26.0 1/2” BSPP 25.0 42.0 59.0 59.0 75.0 118.5 215.0 196.0 1.5 60.0 195.0
8-12-15-20-23
GR25 SMT AC14 B5
110.0 9.5 130.0 160.0 14.0 16.2 5.2 3/4”BSPP 3/4” BSPP 27.0 1/2” BSPP 27.5 32.5 65.0 65.0 73.5 171.0 263.0 263.0 2.7 66.0 243.5
25-30
GR25 SMTAC19 B5
130.0 10.5 165.0 200.0 19.0 21.9 6.5 3/4”BSPP 3/4” BSPP 27.0 1/2” BSPP 27.5 42.5 65.0 65.0 76.5 171.0 266.0 266.0 2.7 66.0 246.5
25-30
GR32 SMTAC19 B5
130.0 12.0 165.0 200.0 19.0 21.9 6.5 1”1/4 SAE - 3000 1” 1/4 BSPP 55.0 1” SAE - 3000 41.0 43.7 96.0 94.0 92.7 192.0 318.7 271.7 4.4 95.0 262.7
35-45-55-75
GR32 SMT AC24 B5
130.0 12.0 165.0 200.0 24.0 27.3 8.5 1”1/4 SAE - 3000 1” 1/4 BSPP 55.0 1” SAE - 3000 41.0 52.7 96.0 94.0 92.7 192.0 318.7 271.7 4.4 95.0 262.7
35-45-55-75
GR40 SMTAC19 B5
130.0 12.0 165.0 200.0 19.0 22.0 6.5 1" 1/2 SAE - 3000 1” 1/2 BSPP 65.0 1” 1/4 SAE -3000 46.5 42.5 112.0 108.0 109.5 224.5 373.0 327.0 7 109.0 319.0
100-125-150
GR40 SMT AC24 B5
130.0 12.0 165.0 200.0 24.0 27.5 8.5 1" 1/2 SAE - 3000 1” 1/2 BSPP 65.0 1” 1/4 SAE -3000 46.5 52.5 112.0 108.0 109.5 224.5 373.0 327.0 7 109.0 319.0
100-125-150
GR40 SMT AC28 B5
180.0 14.0 215.0 250.0 28.0 31.5 8.5 1" 1/2 SAE - 3000 1” 1/2 BSPP 65.0 1” 1/4 SAE -3000 46.5 64.0 112.0 108.0 120.0 224.5 383.5 337.5 7 109.0 329.5
100-125-150
GR45 SMT AC28 B5
180.0 14.0 215.0 250.0 28.0 31.5 8.5 2" SAE - 3000 2” BSPP 85.0 1” 1/2 SAE -3000 51.5 63.5 125.0 122.5 120.0 248.0 413 361.0 7 123.5 343.0
180-210
GR45 SMT AC38 B5
230.0 15.0 265.0 300.0 38.0 42.0 10.5 2”SAE - 3000 2” BSPP 85.0 1” 1/2 SAE -3000 51.5 81.0 125.0 122.5 133.5 248.0 426.5 374.5 7 123.5 356.5
180-210
GR55 SMT AC28 B5
180.0 14.0 215.0 250.0 28.0 31.5 8.5 2”1/2 SAE - 3000 2” 1/2 BSPP 95.0 2” SAE - 3000 55.0 62.5 148.0 142.5 125.5 297.0 474.5 410.5 15.5 143.5 420.5
250-300-330-380
GR55 SMT AC38 B5
230.0 15.0 265.0 300.0 38.0 42.0 10.5 2”1/2 SAE - 3000 2” 1/2 BSPP 95.0 2” SAE - 3000 55.0 82.5 148.0 142.5 145.5 297.0 494.5 430.5 15.5 143.5 440.5
250-300-330-380
GR60 SMT AC28 B5
180.0 14.0 215.0 250.0 28.0 31.5 8.5 3”SAE -3000 3” BSPP 105.0 2” 1/2 SAE - 3000 63.0 65.0 160.0 155.0 126.0 342.0 530.5 448.5 25 154.0 455.5
SMT AC pumps - Dimensional drawings / Disegni dimensionali

440-500
GR60 SMT AC38 B5
230.0 14.5 265.0 300.0 38.0 41.8 10.5 3”SAE -3000 3” BSPP 105.0 2” 1/2 SAE - 3000 63.0 83.0 160.0 155.0 146.0 342.0 550.5 468.5 25 154.0 475.5
440-500
GR70 SMT AC28 B5
180.0 14.0 215.0 250.0 28.0 31.5 8.5 3”1/2 SAE - 3000 3” 1/2 BSPP 110.0 3” SAE - 3000 73.0 63.1 180.0 180.0 139.3 422.0 553.3 553.3 30 179.0 567.3
600-660-800
GR70 SMT AC38 B5
230.0 14.5 265.0 300.0 38.0 41.8 10.5 3”1/2 SAE - 3000 3” 1/2 BSPP 110.0 3” SAE - 3000 73.0 87.3 180.0 180.0 160.5 422.0 574.5 574.5 30 179.0 588.5
600-660-800

All data reported by catalogue can change without any notice. I dati presenti nel catalogo possono cambiare senza preavviso.

9
 Product configuration / Configurazione prodotto

Suction and drain hole configuration table / Tabella configurazioni porte di aspirazione e drenaggio

SUCTION CONFIGURATION CODES DRAIN CONFIGURATION CODES

CODICI CONFIGURAZIONE ASPIRAZIONE CODICI CONFIGURAZIONE DRENAGGIO

T1 D1

T2 D2

T3 D3

T4 D4

Standard configuration / Configurazione standard: T1 – D2

Standard configuration for pumps WITH RP VALVE* / Configurazione standard per pompa CON VALVOLA RP*: T4 – D2
Example of code for optional suction and drain configuration / Esempio di codice per aspirazione e drenaggio non stan-
dard:
GR32 SMT 45L T1 D3 

* Settima recommends that in case of request of pump with RP valve (external variable regulation valve), it is necessary to choose very carefully
the suction and drain configuration. Once the external valve is built on the pump it will be not possible any change of both configurations.
Please, check the following page for RP option. / Settima raccomanda di scegliere attentamente la configurazione delle porte nel caso di pompa con
valvola RP (valvola regolazione variabile esterna). La valvola RP impedisce di modificare l’orientamento delle porte una volta installata sulla pompa.
Vedere pagina seguente per l’opzione RP.

10
 Product configuration / Configurazione prodotto

RP relief valve option configuration table / Tabella configurazioni valvola di sicurezza RP

INTERNAL BYPASS EXTERNAL BYPASS

BYPASS INTERNO BYPASS ESTERNO

Internal Bypass variable regulation valve is available as option for the follwing models: GR20, GR25, GR32, GR40, GR45,
GR55, GR60, GR70 / Valvola a regolazione variabile con bypass interno opzione disponibile per i modelli GR20, GR25, GR32,
GR40, GR45, GR55, GR60, GR70

External Bypass variable regulation valve is available as option for the follwing models: GR80, GR90 / Valvola a regolazi-
one variabile con bypass esterno opzione disponibile per i modelli GR80, GR90.

Example of code for optional RP valve / Esempio di codice per opzione RP:
GR32 SMT 45L T4 D2 RP 

11
 Product configuration / Configurazione prodotto

Motor pump selection table / Tabella selezione motore

Motor form 56 63 71 80 90 100 112 132

Size
Forma motore AC9 AC11 AC14 AC19 AC24 AC28 AC28 AC38
B14 ü ü ü ü
GR 20
B5 ü ü ü
B14 ü ü
GR 25
B5 ü ü
B14 ü ü
GR 32
B5 ü ü
B14 ü ü ü ü
GR40
B5 ü ü ü ü
GR45 B5 ü ü ü
GR55 B5 ü ü ü
GR60 B5 ü ü ü
GR70 B5 ü ü ü

Example of codes for hollow shaft models / Esempi di codici per modelli ad albero cavo:
GR32 SMT 45L AC24/B5 

12
 Drain
Seals polymer Suction configuration Internal
High Hollow
Nominal Shaft Pump (shaft, O-ring) Screw configuration codes pressure Suction Bearing
Pump Pump viscosity shaft Seal type
flow type body** Polimero treatment code (hollow relief valve flange Rotation type
type model flag flange Tipo di
Portata Tipo Corpo guarnizioni Trattamento Codice shaft only) Valvola Flangia Rotazione Tipo
Tipo Modello Alta Flangia tenuta
nominale albero pompa** (albero, anello viti porta Codici interna di d’aspirazione cuscinetto
viscosità albero cavo
di tenuta) aspirazione drenaggio sicurezza
(solo AC)

8L, 12L,
GR20 15L, 20L, Standard
23L No security
Standard valve
aluminium Standard Nessuna
GR25 25L, 30L Standard
Alluminio steel main valvola
Lip seal
Standard (none) screw (none)
(none) Standard
normal cast iron idler
radial
shaft & screws
35L, 45L, radiale
GR32 flange vite centrale in
55L, 75L (none)
type acciaio
albero viti laterali in
Standard maschio e ghisa Standard Optional Standard
100L, 125L, Standard Standard Standard
GR40 up to flangia Optional (none) D2 RF1 (none)
150L NBR Optional T1 Clockwise
fino a (none) GD (none) 5 bar
(none) TM*** (none) destra
100 cSt cast iron security
mechanical (none)
(none) ghisa sicurezza
SMT seal for oil
GR45 180L, 210L B5 5 bar
dry Optional
B14 GZ
esterna TMK AXS
(only hol- cast iron RF2
mechani- axial SAE
low shaft) with internal Optional 10 bar Optional
SMIT cal seal for assiale SAE
250L, 300L, Optional (solo albero coating HA*** Optional security CS
GR55 submersible Optional water and Optional
330L, 380L hollow cavo) ghisa con core hardened D1 sicurezza 10 encapsu-
sommersa V glycole an T2 AX Optional
Optional shaft rivestimento steel screws bar lated ball
FKM coolant axial BSPP SX
SN type* interno (available only D3 bearing
fluids T3 assiale BSPP counter
from Albero with mechani- RF3 cuscinetto
GR60 440L, 500L E clockwise
da cavo* A cal seal) D4 15 bar scher-
EPDM TMZ T4 AL sinistra
100 cSt AC9 carbon steel viti in acciaio security mato
mechanical tank-top
AC11 acciaio temprato (solo sicurezza 15
seal for fuel flange
AC14 con TM) bar
600L, 660L, oil tappa
GR70 AC19 AZ
800L d’aspirazione
AC24 carbon steel HD RP****
FGM sopra serba-
AC28 with internal surface treated variable
magnetic toio
Ordering code table / Tabella codici di ordinazione

AC38 coating screws regulation

1.000L, sealless
GR80 acciao con viti trattate su- valve
1.200L pump
rivestimento perficialmente valvola
interno esterna a
regolazione
GR90 1.220L variabile

* To request the right hollow shaft according to the pump model please check chapter ”Motor pump selection”. Per richiedere il giusto tipo di albero cavo in base al
modello di pompa vedere il capitolo “Selezione motore”.
** Please contact Settima for different available materials and treatments. Contattare Settima per differenti materiali e trattamenti disponibili.
*** Options HA and TM are not available for version SMT AC. Le opzioni HA e TM non sono disponibili per i modelli SMT AC.
**** RP valve is not available with options AX and AL. La valvola RP non è disponibile con le opzioni AX e AL.

13
 SMT pumps series / Serie SMT

Settima three screw pumps / Le pompe a tre viti Settima

Three screw pumps Le pompe a tre viti, oggi, rappresentano la classe di pompe
represent the larg- a viti maggiormente utilizzate e le più flessibili sul mercato.
est class of multiple Sono considerate le più affidabili ed economiche e raggiun-
screw pumps in ser- gono bassissimi livelli di emissioni acustiche e di vibrazioni.
vice today. Well known Indipendentemente dal tipo di applicazione e dalle condi-
to be very reliable, zioni ambientali, sono ampiamente utilizzate in quanto ri-
cost-efficient, virtually spettano i requisiti di tutti i settori industriali, dall’oil&gas,
pulsation-free, very al settore chimico, navale, industriale, al settore della mo-
low noise, three screw vimentazione, energetico, power generation, industrial ali-
pumps are considered mentare, della carta, industria farmaceutica e molte altre.
as the most flexible Le pompe Settima SMT, sono tra le più usate in tutto il mon-
pumps on the market. do e vantano trentacinque anni di esperienza nel mondo
No matter the applications and the environmental condi- dell’oleodinamica.
tions, they are extensively used in meeting the require-
ments of all industrial sectors, from oil&gas, chemical, Flusso omogeneo, nessuna pulsazione, basse emissioni
marine, industrial, mobile, energy and power generation, acustiche
food processing, pulp & paper, pharmaceutical and many Le pompe a tre viti della serie SMT sono progettate per eli-
other. Settima SMT represent one of the most used three minare le pulsazioni, assicurare un funzionamento omoge-
screw pumpseries all over the world after thirty five years neo e ridurre al minimo le emissioni acustiche, eliminando di
of expericnece in the hydraulic sector. conseguenza i costi legati alla necessità di ricorrere a misure
secondarie per la riduzione del rumore.
No pulsation, smooth flow, low noise Il flusso privo di pulsazioni delle pompe Settima SMT ne per-
SMT three screw pumps are designed to avoid any pulsa- mette l’applicazione anche in condizioni critiche, come ad
tion, to ensure a smooth operation and to reduce to the esempio idraulica di precisione, dosaggio e misurazione di
lowest level the acoustic emissions, eliminating all costs carburanti.
of second noise reduction measures.
The pulsation-free flow of SMT pumps allows Settima Giunto magnetico senza tenute rotanti, totale assenza
screw pumps also in output condition management criti- di perdite - Opzione FGM
cal to applications, such as precision hydraulic controls Le pompe Settima SMT possono, su richiesta, essere dotate
and fuel metering. di giunto magnetico. Con l’applicazione del giunto magneti-
co, l’elemento di trasmissione e quello condotto sono erme-
Magnetic coupling totally leakage free seal less pumps ticamente separati. In caso di fluidi pericolosi, l’utilizzo del
- FGM Option giunto magnetico garantisce una tenuta affidabile che im-
SMT can be equipped with a magnetic coupling optional- pedisce la possibilità di perdite. Il giunto magnetico consiste
ly. The hermetically sealed magnetic coupling is a perma- nella copertura fissata
nent rotor magnetic synchronous coupling able to trans- sull’elemento condotto
mit torque throught magnetic forces between the internal che separa il rotore in-
and the external rotor. Applying a magnetic coupling, the terno da quello esterno.
drive and the driven sides are hermetically separated. Grazie all’assenza di
In case of critical media handling, the magnetic coupling connessioni mecca-
is a reliable seal and avoids any serious leaking. Due to the niche, le vibrazioni
absence of mechanical connection, the vibrations due to dovute alla trasmis-
torque transmission are very low, with completely leak- sione di potenza sono
proof separation of the pumped fluid and the atmosphere. ridotte, senza possibi-
The magnetic coupling is used to ensure no media leak- lità di contaminazione
ing or when working in environments with potentially ex- dell’atmosfera da parte
plosive athmospheres. del fluido.

14
Performances @ 1500 - GR 20-25

Flowrate @ 1450 RPM - 6 cSt

8L 12L 15L 20L 23L 25L 30L
25

20

_____
Flowrate (l/min)

15
GR25

_____
10 GR20

0
0 5 10 15 20 25 30 35 40 45
Pressure (bar)

Flowrate @ 1450 RPM - 68 cSt

8L 12L 15L 20L 23L 25L 30L
25

20

_____
Flowrate (l/min)

15
GR25

_____
10 GR20

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Flowrate @ 1450 RPM - 400 cSt

8L 12L 15L 20L 23L 25L 30L
25

20

_____
Flowrate (l/min)

15
GR25

_____
10 GR20

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

15
 Performances @ 1500 - GR 20-25

Power @ 1450 RPM - 6 cSt

8L 12L 15L 20L 23L 25L 30L
1,5

1,2

_____
0,9 GR25
Power (kW)

_____
0,6 GR20

0,3

0,0
0 5 10 15 20 25 30 35 40 45
Pressure (bar)

Power @ 1450 RPM - 68 cSt

8L 12L 15L 20L 23L 25L 30L
3,5

3,0

2,5
_____
GR25
Power (kW)

2,0

_____
1,5 GR20

1,0

0,5

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Power @ 1450 RPM - 400 cSt

8L 12L 15L 20L 23L 25L 30L
3,5

3,0

2,5
_____
GR25
Power (kW)

2,0

_____
1,5 GR20

1,0

0,5

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

16
Performances @ 3000 - GR 20-25

Flowrate @ 2950 RPM - 6 cSt

8L 12L 15L 20L 23L 25L 30L
50

40

_____
Flowrate (l/min)

30
GR25

_____
20 GR20

10

0
0 5 10 15 20 25 30 35 40 45 50 55
Pressure (bar)

Flowrate @ 2950 RPM - 68 cSt

8L 12L 15L 20L 23L 25L 30L
50

40

_____
Flowrate (l/min)

30
GR25

_____
20 GR20

10

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Flowrate @ 2950 RPM - 400 cSt

8L 12L 15L 20L 23L 25L 30L
50

40

_____
Flowrate (l/min)

30
GR25

_____
20 GR20

10

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

17
 Performances @ 3000 - GR 20-25

Power @ 2950 RPM - 6 cSt

8L 12L 15L 20L 23L 25L 30L
4,0

3,5

3,0

2,5 _____
GR25
Power (kW)

2,0
_____
GR20
1,5

1,0

0,5

0,0
0 5 10 15 20 25 30 35 40 45 50 55
Pressure (bar)

Power @ 2950 RPM - 68 cSt

8L 12L 15L 20L 23L 25L 30L
7,0

6,0

5,0
_____
GR25
Power (kW)

4,0

_____
3,0 GR20

2,0

1,0

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Power @ 2950 RPM - 400 cSt

8L 12L 15L 20L 23L 25L 30L
7,0

6,0

5,0
_____
GR25
Power (kW)

4,0

_____
3,0 GR20

2,0

1,0

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

18
Performances @ 1500 - GR 32-40-45

Flowrate @ 1450 RPM - 6 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
140

120

100 _____
GR45
Flowrate (l/min)

80
_____
GR40
60
_____
GR32
40

20

0
0 5 10 15 20 25 30 35 40 45 50 55
Pressure (bar)

Flowrate @ 1450 RPM - 68 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
140

120

100 _____
GR45
Flowrate (l/min)

80
_____
GR40
60
_____
GR32
40

20

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Flowrate @ 1450 RPM - 400 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
140

120

100 _____
GR45
Flowrate (l/min)

80
_____
GR40
60
_____
GR32
40

20

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

19
 Performances @ 1500 - GR 32-40-45

Power @ 1450 RPM - 6 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
12,0

10,0

_____
8,0 GR45
Power (kW)

_____
6,0 GR40

_____
4,0 GR32

2,0

0,0
0 5 10 15 20 25 30 35 40 45 50 55
Pressure (bar)

Power @ 1450 RPM - 68 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
20,0

16,0
_____
GR45
12,0
Power (kW)

_____
GR40
8,0 _____
GR32

4,0

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Power @ 1450 RPM - 400 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
20,0

16,0
_____
GR45
12,0
Power (kW)

_____
GR40
8,0 _____
GR32

4,0

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

20
Performances @ 3000 - GR 32-40-45

Flowrate @ 2950 RPM - 6 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
250

200

_____
GR45
Flowrate (l/min)

150
_____
GR40
100
_____
GR32

50

0
0 5 10 15 20 25 30 35 40 45 50 55
Pressure (bar)

Flowrate @ 2950 RPM - 68 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
250

200
_____
GR45
Flowrate (l/min)

150
_____
GR40
100
_____
GR32

50

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Flowrate @ 2950 RPM - 400 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
250

200
_____
GR45
Flowrate (l/min)

150
_____
GR40
100
_____
GR32

50

0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

21
 Performances @ 3000 - GR 32-40-45

Power @ 2950 RPM - 6 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
24,0

20,0

_____
16,0 GR45
Power (kW)

_____
12,0 GR40

_____
8,0 GR32

4,0

0,0
0 5 10 15 20 25 30 35 40 45 50 55
Pressure (bar)

Power @ 2950 RPM - 68 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
40,0

35,0

30,0
_____
GR45
25,0
Power (kW)

_____
20,0 GR40

15,0 _____
GR32
10,0

5,0

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Power @ 2950 RPM - 400 cSt

35L 45L 55L 75L 100L 125L 150L 180L 210L
40,0

35,0

30,0
_____
GR45
25,0
Power (kW)

_____
20,0 GR40

15,0 _____
GR32
10,0

5,0

0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

22
Performances @ 1500 - GR 55-60-70-80-90

Flowrate @ 1450 RPM - 6 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
800

700
_____
600 GR90

500 _____
Flowrate (l/min)

GR80
400
_____
GR70
300
_____
200 GR60

100 _____
GR55
0
0 5 10 15 20 25 30 35 40 45 50
Pressure (bar)

Flowrate @ 1450 RPM - 68 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
800

700
_____
600 GR90

500 _____
Flowrate (l/min)

GR80
400
_____
GR70
300
_____
200 GR60

100 _____
GR55
0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Flowrate @ 1450 RPM - 400 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
800

700
_____
600 GR90

500 _____
Flowrate (l/min)

GR80
400
_____
GR70
300
_____
200 GR60

100 _____
GR55
0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

23
 Performances @ 1500 - GR 55-60-70-80-90

Power @ 1450 RPM - 6 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
60,0

50,0
_____
GR90
40,0
_____
GR80
Power (kW)

30,0
_____
GR70
20,0
_____
GR60
10,0
_____
GR55
0,0
0 5 10 15 20 25 30 35 40 45 50
Pressure (bar)

Power @ 1450 RPM - 68 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
120,0

100,0
_____
GR90
80,0
_____
GR80
Power (kW)

60,0
_____
GR70
40,0
_____
GR60
20,0
_____
GR55
0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Power @ 1450 RPM - 400 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
120,0

100,0
_____
GR90
80,0
_____
GR80
Power (kW)

60,0
_____
GR70
40,0
_____
GR60
20,0
_____
GR55
0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

24
 Performances @ 3000 - GR 55-60-70-80-90

Flowrate @ 2950 RPM - 6 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
1600

1400
_____
1200 GR90 (*)
1000 _____
Flowrate (l/min)

GR80 (*)
800
_____
GR70
600
_____
400 GR60

200 _____
GR55
0
0 5 10 15 20 25 30 35 40 45 50
Pressure (bar)

Flowrate @ 2950 RPM - 68 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
1600

1400
_____
1200 GR90 (*)
1000 _____
Flowrate (l/min)

GR80 (*)
800
_____
GR70
600
_____
400 GR60

200 _____
GR55
0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Flowrate @ 2950 RPM - 400 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
1600

1400
_____
1200 GR90 (*)
1000 _____
Flowrate (l/min)

GR80 (*)
800
_____
GR70
600
_____
400 GR60

200 _____
GR55
0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

(*) For shaft speed lower than 1.000 rpm and over 1.800 rpm please contact Settima. Per velocità inferiori a 1.000 rpm e maggiori di 1.800 rpm contattare Settima.

25
 Performances @ 3000 - GR 55-60-70-80-90

Power @ 2950 RPM - 6 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
120,0

100,0
_____
GR90 (*)
80,0
_____
GR80 (*)
Power (kW)

60,0
_____
GR70
40,0
_____
GR60
20,0
_____
GR55
0,0
0 5 10 15 20 25 30 35 40 45 50
Pressure (bar)

Power @ 2950 RPM - 68 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
240,0

200,0
_____
GR90 (*)
160,0
_____
GR80 (*)
Power (kW)

120,0
_____
GR70
80,0
_____
GR60
40,0
_____
GR55
0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

Power @ 2950 RPM - 400 cSt

250L 300L 330L 380L 440L 500L 600L 660L 800L 1000L 1200L 1220L
240,0

200,0
_____
GR90 (*)
160,0
_____
GR80 (*)
Power (kW)

120,0
_____
GR70
80,0
_____
GR60
40,0
_____
GR55
0,0
0 10 20 30 40 50 60 70 80 90
Pressure (bar)

(*) For shaft speed lower than 1.000 rpm and over 1.800 rpm please contact Settima. Per velocità inferiori a 1.000 rpm e maggiori di 1.800 rpm contattare Settima.
All data reported by catalogue can change without any notice. I dati presenti nel catalogo possono cambiare senza preavviso.

26
 Notes / Note

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

........................................................................................................................................................................................................................

27
 Settima, Italy
Headquarter, r&d and production

USA ASIA Ltd.

Warehouse Sales Office

Settima Meccanica Srl

Settima - 29020 Piacenza (Italia)
tel. +39 0523.3650
fax +39 0523.3650299
www.settima.it
APR2016

[email protected]

28