400 Series 403D-07 Industrial

15.3 kW / 20.5 hp @ 3600 rpm

This 0.7 litre, 3 cylinder engine complements the exciting Perkins® 400 Series
product line-up, offering customers an ultra-compact, lightweight power
unit that maintains all the customer benefits they can experience from other
products in the range.

The 400 Series engine family continues to set new standards in the compact
engine market. Developed alongside customers to fulfil their needs in the
construction, materials handling, agricultural/turf, genset and compressor
markets, it is another class leading diesel range from Perkins.

Built to the most demanding standards, the 400D engines meet all the
requirements of the off-highway emissions legislation for Stage IIIA (EU) and
MLIT Step 4 (Japan).

Long 500 hour service intervals, a two-year standard warranty, low noise and harshness,
and a wide range of options make the 400 Series range the complete solution for compact power needs.

The 403D-07 is a 3 cylinder 0.7 litre unit delivering impressive performance, with low operating costs, in an ultra
compact efficient package, ideally suited for a wide range of small off-highway applications.

Emissions statement
Industrial and IOPU Engines: Certified against the requirements of EU Stage IIIA (Directives 97/68/EC as last
amended, and 2004/26/EC, as last amended).
Constant Speed engines for use in Industrial, IOPU and ElectropaK applications: Certified against the requirements
of EU Stage IIIA (Directive 97/68/EC, as last amended for mobile applications).

Specification
Number of cylinders 3 in-line
Bore and stroke 67 x 72 mm 2.6 x 2.8 in
Displacement 0.76 litres 46.5 in3
Aspiration Naturally aspirated
Cycle 4 stroke
Combustion system Indirect injection
Compression ratio 23.5:1
Rotation Anti-clockwise, viewed on flywheel
Total lubricating capacity 3.05 litres 0.8 US gal
Cooling system Liquid 50/50 antifreeze
Total coolant capacity 1.2 litres 0.3 US gal

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1813/12/14 Produced in England ©2014 Perkins Engines Company Limited
400 Series 403D-07 Industrial
15.3 kW / 20.5 hp @ 3600 rpm

Features and benefits

Ultra-compact power
l Up to 15.3 kW from an engine envelope of 0.09 m3
l Easy installation even in the smallest of machines

Clean and quiet

l Noise levels have been kept to a minimum
l Subjective harshness has been carefully controlled making the engine sound even quieter

Durable power
l Product design and process improvements enhance both engine reliability and durability
l An improved (advanced) governor, valve seat inserts, and new compliance testing deliver reliability of 6,000 hours
l A standard two-year warranty demonstrates our confidence in durability and reliability

Low operating costs

l Approved for operation on biodiesel* concentrations of up to 20%
l Oil and filter changes are 500 hours, dependent on load factor

l Engine durability and reliability, the warranty offering and ease of installation combine to drive down the cost of
ownership
l Warranties and Service Contracts

We provide one-year warranties for constant speed engines and two-year warranties for variable speed models, as
standard. These are supported by multilevel Extended Service Contracts that can be bought additionally
Discover more: www.perkins.esc

Product support
l With highly trained Perkins distributors in thousands of communities in over 180 countries, you are never far away
from expert product knowledge, genuine parts and a range of advanced diagnostic technology for keeping your
engine in peak condition
l To find your local distributor: www.perkins.com/distributor

*Subject to conformance with ASTM D6751 and EN14214

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1813/12/14 Produced in England ©2014 Perkins Engines Company Limited
400 Series 403D-07 Industrial
15.3 kW / 20.5 hp @ 3600 rpm

Technical information
l Cast iron engine block
l Flywheel and flywheel housing

l Fuel injection pump

l Spin on fuel filter

l Glow plug starting aid

l Lub oil sump

l Spin on lub oil filter

l Inlet manifold

l Cast iron exhaust manifold – side outlet

l Closed circuit breather

l Coolant pump belt driven

l Starter motor 12 volt

l Alternator 12 volt 14 amp

l ESOS (Electric shut-off solenoid)

l Lub oil pressure switch

l Coolant temperature switch

l Choice of coolant fans

l Cold start capability to -20°C (aided)

l Gradeability 35° continuous

Option groups
A selection of optional items is available to enable you to prepare a specification precisely matched to your needs.

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1813/12/14 Produced in England ©2014 Perkins Engines Company Limited
400 Series 403D-07 Industrial
15.3 kW / 20.5 hp @ 3600 rpm

371 mm

528 mm
480 mm

Engine package weights and dimensions

Length 480 mm 18.9 in
Width 371 mm 14.6 in
Height 528 mm 20.8 in
Weight (dry) 71 kg 156.5 lb

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1813/12/14 Produced in England ©2014 Perkins Engines Company Limited
400 Series 403D-07 Industrial
15.3 kW / 20.5 hp @ 3600 rpm

55
Torque (Nm)

50
44.5
45
40
35
30

18
17
15.3 16
15
14
13
12

Power (Kw)
11
10
9
8
7
6
5
4
3
2
1

1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800
Engine Speed (rev/min)
Performance after 60 hours operation with fuel oil at 40˚C at pump inlet

Performance data Gross intermittent (ISO/TR 14396) Speed rpm

Power output (kW) 15.3 3600
Power output (hp) 20.5 3600
Peak torque (Nm) 44.5 2200
Peak torque (lbf·ft) 32.8 2200

www.perkins.com

Photographs are for illustrative purposes only and may not reflect final specification.
All information in this document is substantially correct at time of printing and may be altered subsequently.
Final weight and dimensions will depend on completed specification.

Publication No. PN1813/12/14 Produced in England ©2014 Perkins Engines Company Limited