AutoCreaser Pro 50

DOCUMENT
CREASING MACHINE
ILLUSTRATED PARTS MANUAL
Morgana Systems Limited United Kingdom
Telephone: ( 01908 ) 608888 Facsimile: ( 01908 ) 692399
Website: www.morgana.co.uk

ISSUE 7 NOVEMBER 2011

70-130
 INTRODUCTION

AutoCreaser Pro 50

ILLUSTRATED PARTS MANUAL

The Illustrated Parts Manual has been designed to assist when selecting a part or
assembly which may be required to service or repair your machine.

The index on page four lists all of the major assemblies in the order in which the
machine is constructed.

The following page demonstrates how to recognise a part from a sub-assembly and
shows the quantity contained within the major assembly.

The major assembly number and description is listed at the top of the page and
should always be quoted when ordering parts or when seeking technical advice.

Before ordering parts confirm that the model number of the machine (listed at the top
of page four) is identical to the number stamped on the specification plate.
Whilst checking this, make a note of the serial number also stamped on the plate.

Some components will not be made available individually as they form part of a
sub-assembly which may require specialist tools and knowledge to dismantle. The
machine may not perform correctly if attempts are made to repair sub-assemblies of
this type.

NOTE....
ALWAYS READ THE OPERATORS MANUAL BEFORE MAKING ANY
ADJUSTMENTS TO YOUR MACHINE AND ALWAYS DISCONNECT THE POWER
SUPPLY BEFORE REMOVING ANY COVERS.

Page 2 PAPER
AutoCreaser Pro 50

CREASER Page 3
730820T CONTENTS

SECTION ASSEMBLY DESCRIPTION PAGE

1 7-01-18 MAIN ASSEMBLY 6

2 7-03-14 FEED BED ASSEMBLY 10

3 730820T FINAL ASSEMBLY 12

4 7-06-13 CREASER UNIT 20

5 7-08-13 STACKER ASSEMBLY 28

NOTE.... TIP....
To assist you in quickly finding
the section you require, there are
numbered tabs positioned down
the outside edges of each page.

Page 4 PAPER
AutoCreaser Pro 50

DOCUMENT
CREASING MACHINE

CREASER Page 5
7-01-18 MAIN ASSEMBLY

Page 6 PAPER
AutoCreaser Pro 50 MAIN ASSEMBLY 7-01-18
IT EM No. PA R T No . Q T Y. D E S C R IP T IO N
1 71-01-03 1 A D A P T O R A S S Y - Ø 2 4 / Ø 2 4 - S V1 9 0 - D r u m B lo w - C A R D M A S T E R
2 7 1 -0 0 2 -0 4 2 T IE BA R - A C 5 0
3 71-005 4 S UPPO R T S PO O L .
4 71-010 1 PIVO T BU S H - S te pp e d.
5 7 1 -0 1 3 -0 2 1 T I L T L E VE R - M K 2 .
6 71-015 2 P A D - S t a ck e r.
7 71-016 4 S H O C K S L E E VE .
8 7 1 -0 1 8 -0 2 1 P L A T E - B la n k i n g - A u to C r e a s e r .
9 7 1 -0 5 2 -0 1 2 A X L E - A u to C re a s e r 5 0 .
10 7 1 -0 5 3 -0 2 1 B L O W E R S U P P O R T - A u to C re a s e r 5 0 M k 4 .
11 7 1 -0 5 5 -0 1 2 W H EEL CO LL A R
12 7 1 -0 7 1 -0 2 1 M A IN F R A M E - A u to C re a s e r 5 0 M k 4 .
13 7 1 -0 7 2 -0 2 1 PL IN T H - A u to C re a s e r 5 0 M k 4 .
14 7 1 -0 8 6 -0 2 1 F a n M T G . P la te - Ø 1 2 0
15 7 5 -2 0 8 -0 1 1 T o w e r B la n k - O p S i d e
16 7 5 -2 0 8 -0 3 1 T o w e r B la n k - L a y S id e - C a b le R o u te
17 7 5 -2 2 9 -0 1 1 F a n G u a rd A s s y
18 7 5 -3 1 6 -0 2 1 F A N & L EA D A S S Y. - A C 5 0 Peo.
19 7 5 -4 1 5 -0 2 1 BA F F L E PL A T E - L o w e r - A u to C re a s e r 5 0 M k 4 .
20 7 5 -4 2 4 -0 4 1 C O N T R O L L E G A S S E M BL Y - A u to C re a s e r 5 0 M k 4 .
21 7 8 -0 5 7 -0 1 2 H O O P H O O K.
22 62-006 2 NYL O N W H E E L .
23 9 1 -0 0 6 -0 5 1 W H E E L T U B E - O p. S ide - A u to C re a s e r 5 0 .
24 9 1 -0 0 6 -0 6 1 W H E E L T U B E - L a y S i d e - A u to C r e a s e r 5 0 .
25 9 1 -0 2 5 -0 4 2 B U N G - C o m p re s s o r - Ø 2 5 P i p e .
26 9 1 -0 2 5 -0 5 2 B U N G - C o m p re s s o r - Ø 4 0 P i p e .
27 9 1 -1 0 4 -0 1 1 F A N H UB - S V1 9 0 .
28 601-01 5 4 H o le B u s h in g - S p lit - Ø 3 8
29 601-16 1 3 VI B R A T I O N M O U N T - S t u d .
30 603-04 1 4 S PIR O L S PA C ER - Ø 4 x Ø 5 .6 5 x 4 L g .
31 605-05 8 4 NYL O N S PA C E R - Ø 7 .9 4 x Ø 4 .3 4 x 6 .3 5
32 613-33 9 2 C A BL E T IE M O UN T IN G
33 615-01 4 8 C IR C L IP - E XT E R N A L - Ø 1 5
34 617-00 8 2 W heel - Ø 100
35 621-02 5 1 FA N - PL A S T IC 5 BL A D E 6 " C C W
621-03 2 1 B lo w e r S V1 9 0 ( 5 0 H z )
36
621-03 8 1 B lo w e r S V1 9 0 ( 6 0 H z )
37 650-02 8 6 C A BL E T IE M T G . - P u s h F it.
38 4 0 1 -0 2 -0 4 0 -0 0 6 4 S cr e w - P a n P o z i T a p t it e - M 4 x 6 L g .
39 4 0 1 -0 2 -0 4 0 -0 0 8 18 S cr e w - P a n P o z i T a p t it e - M 4 x 8 L g .
40 4 0 1 -0 2 -0 4 0 -0 1 2 4 S cr e w - P a n P o z i T a p t it e - M 4 x 1 2 L g .
41 4 0 2 -0 2 -0 3 0 -0 8 0 2 S C R E W - C o u n te rs u n k P o z i T a p ti te - M 6 x 8 L g .
42 4 0 2 -0 2 -0 4 0 -0 0 6 2 S cr e w - C s k H d . T a p t it e - M 4 x 6 L g .
43 4 0 2 -0 2 -0 4 0 -0 0 8 6 S cr e w - C s k H d . T a p t it e - M 4 x 8 L g .
44 4 0 3 -0 1 -0 5 0 -0 1 0 2 S C R E W - S o ck e t C a p H e a d - M 5 x 1 0 L g .
45 4 0 3 -0 1 -0 5 0 -0 2 0 2 S C R E W - S o ck e t C a p H e a d - M 5 x 2 0 L g .
46 4 0 3 -0 1 -0 6 0 -0 1 0 4 S C R E W - S o ck e t C a p H e a d - M 6 x 1 0 L g .
47 4 0 4 -0 1 -0 6 0 -0 1 2 2 S C R E W - S o ck e t C o u n te r s u n k H e a d - M 6 x 1 2 L g .
48 4 0 5 -0 1 -0 6 0 -0 1 2 1 S C R E W - S o ck e t B u t to n H e a d - M 6 x 1 2 L g .
49 4 0 5 -0 1 -0 8 0 -0 1 6 4 S C R E W - S o ck e t B u t to n H e a d - M 8 x 1 6 L g .
50 4 0 5 -0 1 -0 8 0 -0 1 0 2 S C R E W - S o ck e t B u t to n H e a d - M 8 x 1 2 L g .
51 4 0 5 -0 1 -0 8 0 -0 8 0 2 S C R E W - S o ck e t B u t to n H e a d - M 8 x 5 0 L g .
52 4 0 9 -0 1 -0 4 0 -0 0 6 2 S cr e w - S k t S e t S c re w - F la t P t. - M 4 x 6 L g .
53 4 6 1 -0 1 -0 4 0 4 N U T - F u ll - M 4
54 4 6 1 -0 1 -0 6 0 5 N U T - F u ll - M 6
55 481-04 0 4 W A S H E R - P la i n - M 4
56 481-05 0 2 W A S H E R - P la i n - M 5
57 481-06 0 5 W A S H E R - P la i n - M 6
58 481-08 0 4 W A S H E R - P la i n - M 8

CREASER Page 7
7-01-21 MAIN ASSEMBLY

Page 8 PAPER
AutoCreaser Pro 50

BLANK
PAGE

CREASER Page 9
7-03-14 FEED BED ASSEMBLY

in 2 Posns. in 2 Posns. in 2 Posns. in 3 Posns.

15 11 14 26 3 7 13 28 22 16 28 23 12 29 31 37

21

25

20
34

19

17 35 9
30
in 2 Posns.

5 33
in 2 Posns.
10
6

36 18 32
2

4 28 27
in 2 Posns. in 6 Posns.

Page 10 PAPER
AutoCreaser Pro 50 FEED BED ASSEMBLY 7-03-14
ITEM No. PART No. QTY. DESCRIPTION
1 73-05-06 1 CHOKE BLEED ASSEMBLY - AutoCreaser50
2 73-06-02 1 VACUUM DRUM DRIVE ASSY. - AutoCreaser Pro
3 73-07-01 1 VACUUM ROLLER ASSY. - AutoCreaser 50 Mk4.
4 175-28-01 1 Butterfly Valve - Stepper
5 73-004 2 Key Hole Latch - Creaser
6 73-009-02 1 FEED BED SPACER - Foam.
7 73-012-02 1 BELT SUPPORT - AutoCreaser 50.
8 73-054-01 1 SUPPORT PLATE - AutoCreaser 50
9 73-066-01 1 KNOB - Vac Bleed
10 73-071-01 1 FEED FRAME - AutoCreaser 50 Mk4.
11 73-075-01 1 FEED DRUM ASSEMBLY - Idler
12 73-077-01 1 VACUUM DRUM MOUNTING - AC50 Mk4.
13 73-080-01 1 MANIFOLD PLATE - AutoCreaser 50 Mk4.
14 93-021 1 Feed Belt
15 93-032 1 Feed Drum Assy - Drive
16 93-033-02 1 Support Bracket - Control Bed - M3
17 94-021 1 LABEL - Papergate 'UP'.
18 51-095 1 Clamp Washer
19 28-003 1 UNIVERSAL KNOB ASSY - M6 x 25 Lg. - Black - Ø16
20 601-015 1 Snap Bushing Ø33.3 x Ø38
21 604-062 1 Waved Washer
22 607-017 1 TIMING BELT - 120 XL - 037
23 609-008 1 'O' Ring.
24 609-030 1 'O' Ring.
25 615-035 2 Metric Push-in Fix
26 401-02-040-006 1 Screw - Pan Pozi Taptite - M4 x 6 Lg.
27 401-02-040-008 7 Screw - Pan Pozi Taptite - M4 x 8 Lg.
28 401-02-040-016 6 Screw - Pan Pozi Taptite - M4 x 16 Lg.
29 401-02-050-020 2 Screw - Pan Pozi Taptite - M5 x 20 Lg.
30 402-02-040-008 2 Screw - Csk Hd. Taptite - M4 x 8 Lg.
31 403-01-040-008 5 SCREW - Socket Cap Head - M4 x 8 Lg.
32 403-01-060-012 1 Screw - Socket Cap Head - M6 x 10 Lg.
33 405-01-060-006 2 Screw - Button Hd. - M6 x 6 Lg.
34 408-01-050-030 1 Screw Skt Cone Pt - M5 x 30 Lg.
35 409-01-040-012 1 Screw - Skt Set Screw - Flat Pt. - M4 x 12 Lg.
36 461-01-060 1 Nut - Full - M6
37 481-040 5 WASHER - Plain - M4

CREASER Page 11
730820T FINAL ASSEMBLY

35 71 37 44 71 51 36 71

2 off
51
6
48
61
41

19

48
4
3

2 off
69 17

3 off

61 27
5
59 50 2 off

2 off 70 2 off

60 28
55
22 20 67 2 off

75 2 off

76 2 off

34

24 33
72

68

52

47 82 62 16
60 25 52 9 26 60
6 off
12 off 4 off

Page 12 PAPER
AutoCreaser Pro 50 FINAL ASSEMBLY
ITEM No. PART No. QTY. DESCRIPTION
3 7-06-13 1 CREASING UNIT ASSEMBLY - Autocreaser Pro 50
4 7-08-13 1 Slotted Stacker Assy - Autocreaser Pro 50
5 71-011 1 HINGE PLATE - AutoCreaser.
6 71-012-02 2 COVER BRACKET - Mk2.
9 73-08-01 1 MANIFOLD TUBE ASSEMBLY - AutoCreaser Pro 50
16 75-01-07 1 CONTROL SYSTEM - AutoCreaser Pro 50
17 75-06-02 1 Touch Screen Assembly - 7” (New Controller)
19 75-253 1 Label - Reverse Gap Set
20 75-356 1 DIN Socket Assy.
22 75-333-01 1 EMC BLANKING PLUG - Eng. Socket.
24 75-387 1 Label - Fuse Ratings
25 75-411-01 1 COMPRESSOR PANEL - Autocreaser Pro 50
26 75-413-01 1 SERVICE PANEL - AutoCreaser Mk4.
27 75-414-02 1 TOP COVER - Touch Screen
28 75-428-01 1 Ethernet Bracket
33 76-041 1 CORD PULLEY - Driven.
34 76-042 1 DRIVE BELT - Feed Bed.
35 76-049-03 1 HINGE SHAFT - Wide
36 76-050-04 1 ENTRY GUARD - Wide
37 76-051-03 1 EXIT GUARD - Wide
41 96-053 1 Label - Roller Tilt
44 123-059 1 Label - Safety Warnings
47 601-080 1 Grommet Ø28.6 X Ø22 X Ø34.9 X 3.2 PVC
48 601-111 1 Tapered Ferrule
50 605-055 2 WASHER - Self Aligning
51 605-056 2 THRUST WASHER - Ø12.7 x Ø8.00 x 0.81
52 606-010 2 M6 Knurled Knoblet
55 613-351 1 MICROSWITCH
59 651-121 1 Connector - Ethernet
60 401-02-040-006 17 Screw - Pan Pozi Taptite - M4 x 6 Lg.
61 401-02-040-008 11 Screw - Pan Pozi Taptite - M4 x 8 Lg.
62 401-02-040-010 6 Screw - Pan Pozi Taptite - M4 x 10 Lg.
67 403-01-030-020 2 SCREW - Socket Cap Head - M3 x 20 Lg.
68 403-01-100-012 1 Screw - Socket Cap Head - M10 x 12 Lg.
69 405-01-060-012 4 SCREW - Socket Button Head - M6 x 12 Lg.
70 405-01-080-016 2 SCREW - Socket Button Head - M8 x 16 Lg.
71 406-01-040-006 6 SCREW - Tamperproof - M4 x 6 Lg
72 409-01-050-005 1 Screw - Skt Set Screw - Flat Pt. - M5 x 5 Lg.
75 464-01-030 2 NUT - NYLOC - M3
76 481-030 2 WASHER - Plain - M3
82 75-485-01 1 HOSE - MANIFOLD TUBE

CREASER Page 13
730820T FINAL ASSEMBLY

Page 14 PAPER
AutoCreaser Pro 50 FINAL ASSEMBLY
ITEM No. PART No. QTY. DESCRIPTION
1 7-01-18 1 MAIN FRAME ASSEMBLY - AutoCreaser Pro 50
2 7-03-14 1 FEED BED ASSY - AutoCreaser Pro 50
7 71-020 1 LOCKING STUD - Clamp
8 71-025 1 Tilt Washer
10 73-072-01 1 SUPPORT BRACKET - Feed Bed - Autocreaser Pro 50
11 74-001-05 1 FEED BED - AutoCreaser Pro 50
12 74-002-02 1 Control Bed
13 74-003 1 BALL HOLDER - AutoCreaser.
14 74-01-14 1 Moving Sidelay - Autocreaser Pro 50
15 74-050-04 1 Loading Table - AutoCreaser Pro 50
18 74-462-01 1 LABEL - Autocreaser Pro 50
21 76-272 1 PSU - SWITCHED MODE - ATX12V - 300W
23 173-020 1 LABEL - Air Seperation
38 94-026 2 CLAMP KNOB - Sidelay.
39 94-028 2 LOCK PIN ASSEMBLY. - Side Lay.
40 94-058 1 BACKSTOP ASSEMBLY - Screw Clamped.
42 96-060 1 LABEL - Lock
43 98-013-03 1 ANTI-STATIC STRIP - Wide
45 172-05-02 1 PAPER GATE ASSY. - Indexing - AutoCreaser 50.
46 173-020-01 1 PSU Mounting Bracket
49 605-043 2 THRUST WASHER - Ø5.1 x Ø9.5 x 0.75
53 606-035 1 LOBE KNOB - Female - M8
54 609-009 1 EDGING STRIP
56 613-388 2 TIE WRAP - Long
57 617-003 5 STEEL BALL - Ø20
58 650-028 7 CABLE TIE MOUNTING - Push Fit
60 401-02-040-006 17 Screw - Pan Pozi Taptite - M4 x 6 Lg.
61 401-02-040-008 29 Screw - Pan Pozi Taptite - M4 x 8 Lg.
63 401-02-040-016 4 Screw - Pan Pozi Taptite - M4 x 16 Lg.
64 401-02-050-020 2 Screw - Pan Pozi Taptite - M5 x 20 Lg.
65 401-04-006-312 4 Screw - Pan Pozi UNC Taptite #6-32 x 5/16” Lg.
66 402-02-030-008 14 Screw - Csk Hd. Taptite - M3 x 8 Lg.
69 405-01-060-012 4 Screw - Socket Button Head - M6 x 12 Lg.
73 415-01-080-012 3 Screw - Hexagon Head - M8 x 12 Lg.
74 461-01-060 2 NUT - Full - M6
77 481-060 2 WASHER - Plain - M6
78 481-080 3 WASHER - Plain - M8
79 75-482-01 1 HOSE - INLET
80 75-483-01 1 HOSE - EXHAUST
81 75-484-01 1 HOSE - VALVE - BLOW
82 75-485-01 1 HOSE - MANIFOLD TUBE
83 75-486-01 1 HOSE - VALVE - VACUUM

CREASER Page 15
730820T FINAL ASSEMBLY

Page 16 PAPER
AutoCreaser Pro 50 FINAL ASSEMBLY

CREASER Page 17
730820T FINAL ASSEMBLY

11

3
5

8
1

9 12

Line on this side

10

ITEM No. PART No. QTY. DESCRIPTION

1 172-06-01 1 PIVOT ASSEMBLY - Papergate.
2 172-025-02 1 POST - Indexing Papergate - AutoCreaser.
3 172-028-02 1 COLLAR - indexing Papergate.
4 172-029-01 1 LOCKING NUT - Paper Gate
5 172-031-01 1 Label - Papergate
6 48-005-04 1 ROTARY PAPERGATE - Indexed.
7 601-162 1 M6 Ball Spring Plunger
8 604-068 1 WAVED WASHER.
9 615-006 1 CIRCLIP - Internal - Ø22
10 404-01-050-010 1 SCREW - Socket Csk Head - M5 x 10 Lg.
11 409-01-030-010 1 Screw - Skt Set Screw - Flat Pt. - M3 x 10 Lg.
12 411-01-040-005 1 SCREW - Skt Set Dog Pt. - M4 x 5 Lg.

PAPER GATE ASSEMBLY (172-05-02)

Page 18 PAPER
AutoCreaser Pro 50

BLANK
PAGE

CREASER Page 19
7-06-13 CREASER UNIT

14 1 35 36 14 13 3 2 31 2 3 13 24 8

73

65

6 25 63 76 18
67 67
70 70 5 30
42 42 SEE PAGE 24
10
SEE PAGE 26
41
8
67
70
16
4
16
67
70 12

22

7 9 29 12 11 45 21 54 27 28 23 26 33 1 1 19 20 17 15
SEE PAGE 25 77 66 66 2 off.

69

Page 20 PAPER
AutoCreaser Pro 50 CREASER UNIT 7-06-13
ITEM NO. PART NUMBER QTY. DESCRIPTION
1 76-003-02 3 TIE BAR - AutoCreaser - Wide.
2 76-011 2 BLADE ADJUSTMENT CAM.
3 76-012 2 ADJUSTMENT DISK - AutoCreaser
4 76-034-06 1 TIMING PULLEY - 16XL (Wide) - Flanged - Short Hub.
5 76-04-02 1 SPLASH GUARD ASSEMBLY - AutoCreaser 50.
6 76-047 2 LOCK NUT - Blade Cam.
7 76-05-01 1 IDLER GEAR ASSEMBLY.
8 76-053-02 2 HINGE PILLAR
9 76-054-03 1 TILT PILLAR - AutoCreaser MK3
10 76-06-02 1 CRANK SHAFT ASSEMBLY - AutoCreaser 50
11 76-062-04 1 STEPPER PINION - 20T AutoCreaser 50
12 76-065 2 STEPPER SHIM.
13 76-101 2 LABEL - Blade Adjustment
14 76-105 2 BUFFER - Exit Guard.
15 76-121-01 1 MTG. PLATE - Stepper Motor.
16 76-122-01 2 TIE BAR - Female.
17 76-123-01 1 TIMING PULLEY - 20XL - Wide Flanged.
18 76-138-02 1 HUB ASSY. - Gap Control - Lay Side.
19 76-143-01 1 Gap Control Shaft
20 76-144-02 1 Female Tie Bar - Single Gap Control (Wide)
21 76-148-01 1 GAP SET LEVER ASSY. - Op. Side.
22 76-148-02 1 GAP SET LEVER ASSY. - Lay. Side.
23 76-149-01 1 Locking Link - Gap Control
24 76-154 1 LEAD - Dual Sensor Assy.
25 76-155 1 LEAD - Paper Jam Sensor.
26 76-150-01 1 Locking Knob - Gap Control
27 76-175-02 1 INPUT ROLLER - Lower - AutoCreaser 50.
28 76-177-02 1 INPUT ROLLER -Upper - AutoCreaser 50.
29 76-179-01 1 SIDE PLATE ASSEMBLY - Op. Side.
30 76-180-01 1 SIDE PLATE ASSEMBLY - Lay Side.
31 76-230-02 1 LEAD - Paper Guide Sensor - Wide.
33 76-240 1 STEPPER DRIVE MOTOR & LEAD ASSY.
35 76-250-02 1 Upper Output Shaft Assy - AC50
36 76-251-02 1 Lower Output Shaft Assy - AC50.
41 56-003-02 1 TIMING PULLEY Wide - 16XL - Flanged.
42 56-004-02 2 TIMING PULLEY - 16XL - Un-Flanged.
45 603-078 1 SPIROL SPACER - Ø10 X Ø13 X 6.5 Lg.
54 615-038 1 RETAINING RING - External - Ø35
63 403-01-080-012 2 Screw - Socket Cap Head - M8 x 12 Lg.
65 405-01-080-020 1 Screw - Button Hd. - M8 x 20 Lg.
66 407-01-050-006 3 Screw - Socket Set Knurled - M5 x 6 Lg.
67 409-01-040-004 3 Screw - Socket Set - Flat Point - M4 x 4 Lg.
69 409-01-050-005 1 Screw - Socket Set - Flat Point - M5 x 5 Lg.
70 411-01-040-006 4 Screw - Socket Set - Dog Point - M4 x 6 Lg.
73 462-01-080 1 Half Nut - M8
76 481-080 17 Washer - Plain - M8
77 481-100 1 Washer - Plain - M10

CREASER Page 21
7-06-13 CREASER UNIT

2 off
68 61 40 38 37 37 51 32 51

44 48 48 48
48

in 4 Posns.
59

48

48

55
48 39 61 68 in 4 Posns.

58 74 58
47

47 53 58

64
64 76

48 76 72

50 56 57

43

34

71 75 62 76 72 76 72
in 3 Posns.

75 60 43 52 49 52
46

Page 22 PAPER
AutoCreaser Pro 50 CREASER UNIT 7-06-13
ITEM NO. PART NUMBER QTY. DESCRIPTION
32 76-237-02 1 BLADE SET - Standard - Autocreaser 50.
34 76-241 1 STEPPER DRIVE MOTOR & LEAD ASSY.
37 78-013 2 PERFORATOR STRIPPER ASSEMBLY.
38 78-060-01 1 PERF. SHAFT SUPPORT BLOCK ASSY - Top.
39 78-060-02 1 PERF. SHAFT SUPPORT BLOCK ASSY - Bottom
40 78-062-01 1 ECCENTRIC Perf Shaft - Top.
43 601-124 2 HOLE BUSHING - Split - Ø19.
44 603-046 2 Spirol Pin - Ø4 x 12 Lg.
46 603-093 1 SPIROL SPACER - Ø10 X Ø13 X 12 Lg.
47 604-071 2 WAVED WASHER - Ø21.0 X Ø27.5 X 3.0
48 605-052 8 SUPPORT WASHER - Ø12
49 607-042 1 TIMING BELT - 160XL - 15.
50 607-048 1 TIMING BELT
51 608-019 2 Shoulder Bolt - Ø12(M10) x 30 Lg.
52 613-027 3 TIE WRAP - Small.
53 613-339 1 CABLE TIE MOUNTING
55 615-067 1 RETAINING RING - External - Ø30
56 651-031 1 TERMINAL STRIP - 45° - Single
57 401-02-040-006 1 Screw - Pan Pozi Taptite - M4 x 6 Lg.
58 401-02-040-008 24 Screw - Pan Pozi Taptite - M4 x 8 Lg.
59 401-02-040-016 4 Screw - Pan Pozi Taptite - M4 x 16 Lg.
60 403-01-050-016 1 Screw - Socket Cap Head - M5 x 16 Lg.
61 403-01-050-020 3 Screw - Socket Cap Head - M5 x 20 Lg.
62 403-01-050-025 7 Screw - Socket Cap Head - M5 x 25 Lg.
64 403-01-080-020 7 Screw - Socket Cap Head - M8 x 20 Lg.
68 409-01-040-006 2 Screw - Socket Set - Flat Point - M4 x 6 Lg.
71 461-01-050 7 Nut - Full - M5
72 461-01-080 7 Nut - Full - M8
74 481-040 4 WASHER - Plain - M4
75 481-050 15 Washer - Plain - M5
76 481-080 17 Washer - Plain - M8

CREASER Page 23
7-06-13 CREASER UNIT

Page 24 PAPER
AutoCreaser Pro 50 CREASER UNIT 7-06-13

CREASER Page 25
7-06-13 CREASER UNIT

Page 26 PAPER
AutoCreaser Pro 50 CREASER UNIT 7-06-15

CREASER Page 27
7-08-13 STACKER ASSEMBLY

1 6

2 4

3
7 1

5 2

8 11 12

10

14 13

View on Rear of Stacker

Page 28 PAPER
AutoCreaser Pro 50 STACKER ASSEMBLY 7-08-13

ITEM NO. PART NUMBER QTY. Description

1 78-008 2 Magnetic Pad
2 78-009-03 2 Magnetic Strip
3 78-017-01 1 Stacker Bed
4 78-031-02 1 Stacker Guide - LH - Screened
5 78-032-01 1 Stacker Guide RH
6 78-033-01 1 Stacker Backstop - LH
7 78-033-02 1 Stacker Backstop - RH
8 78-034-01 1 Actuator Mounting Block
9 16-029-02 1 Hoop Strut - Conveyor
10 601-079 1 Magnet
11 601-174 3 Grub Screw - Slotted Nylon M4 x 6 Lg.
12 402-02-050-010 2 Screw - Csk Hd. Taptite - M5 x 10 Lg.
13 78-073-01 1 Guide Stop - Stacker
14 403-01-030-006 1 Screw - Socket Cap Head - M3 x 6 Lg.

CREASER Page 29