Catalog 4300 Hydraulic Flanges and Components

PDF Section Updated February 2017

and Dual Seal Flanges

G5Q
SAE Port Block Adapter
SAE Port / Code 61 or 62 Block Flange or Pad

O-ring Face Flat Face

VISUAL
SAE T5 K Dynamic INDEX
TUBE FITTING PORT STRAIGHT FLANGE DRILL T MOUNTING Pressure
PART # DASH THREAD SIZE A B D F I DIA. L THREAD HARDWARE (x 1,000 PSI)
O-RING FACE FLAT FACE SIZE UN-2B (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) UNC-2B -SHCS -SX -SS1
SAE PORT / CODE 61 BLOCK FLANGE OR PAD
8G5Q1B 8G5Q1P 8 3/4-16 0.50 1.81 2.13 0.50 0.63 1.25 0.344 1.42 5/16-18 5/16-18 x 1.25 5.0
12G5Q1B 12G5Q1P 12 1 1/16-12 0.75 1.97 2.56 0.75 0.71 1.54 0.406 1.42 3/8-16 3/8-16 x 1.50 4.0
16G5Q1B 16G5Q1P 16 1 5/16-12 1.00 2.17 2.75 1.00 0.71 1.81 0.406 1.50 3/8-16 3/8-16 x 1.50 3.5
20G5Q1B 20G5Q1P 20 1 5/8-12 1.25 2.68 3.12 1.25 0.83 2.22 0.469 1.61 7/16-14 7/16-14 x 1.75 3.0
24G5Q1B 24G5Q1P 24 1 7/8-12 1.50 3.07 3.66 1.50 0.98 2.50 0.531 1.77 1/2-13 1/2-13 x 1.75 2.5
SAE PORT / CODE 62 BLOCK FLANGE OR PAD
8G5Q2B 8G5Q2P 8 3/4-16 0.50 1.81 2.21 0.50 0.63 1.33 0.344 1.42 5/16-18 5/16-18 x 1.25 6.0
12G5Q2B 12G5Q2P 12 1 1/16-12 0.75 2.17 2.80 0.75 0.83 1.65 0.406 1.38 3/8-16 3/8-16 x 1.50 5.5
16G5Q2B 16G5Q2P 16 1 5/16-12 1.00 2.56 3.19 1.00 0.98 1.98 0.409 1.65 7/16-14 7/16-14 x 1.75 4.5
20G5Q2B 20G5Q2P 20 1 5/8-12 1.25 3.07 3.75 1.25 1.06 2.36 0.531 1.77 1/2-13 1/2-13 x 1.75 3.0
24G5Q2B 24G5Q2P 24 1 7/8-12 1.50 3.70 4.41 1.50 1.18 2.68 0.656 1.97 5/8-11 5/8-11 x 2.25 2.7
32G5Q2B 32G5Q2P 32 2 1/2-12 2.00 4.50 5.28 2.00 1.46 3.38 0.781 2.56 3/4-10 3/4-10 x 2.75 2.0

1) See page L38 for standard stainless steel sizes and dimensions.
To receive mounting hardware with flange, insert a “K” after the material designator. Mounting hardware kits are available for
O-ring Face part numbers and include 4 bolts, 4 lock washers and an O-ring.

GQ
NPTF Port Block Adapter
NPTF Port / Code 61 or 62 Block Flange or Pad

O-ring Face Flat Face

PT K Dynamic
TUBE FITTING PORT FLANGE DRILL T MOUNTING Pressure
PART # THREAD SIZE A B D F I DIA. L THREAD HARDWARE (x 1,000 PSI)
O-RING FACE FLAT FACE NPTF (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) UNC-2B SHCS -SX -SS1
NPTF PORT / CODE 61 BLOCK FLANGE OR PAD
8GQ1B 8GQ1P 1/2 - 14 0.50 1.81 2.13 0.50 0.63 1.25 0.344 1.42 5/16-18 5/16-18 x 1.25 5.0
12GQ1B 12GQ1P 3/4 -14 0.75 1.97 2.56 0.75 0.71 1.54 0.406 1.42 3/8-16 3/8-16 x 1.50 4.5
16GQ1B 16GQ1P 1 - 11 1/2 1.00 2.17 2.75 1.00 0.71 1.81 0.406 1.50 3/8-16 3/8-16 x 1.50 4.0
20GQ1B 20GQ1P 1 1/4 - 11 1/2 1.25 2.68 3.12 1.25 0.83 2.22 0.469 1.61 7/16-14 7/16-14 x 1.75 3.5
24GQ1B 24GQ1P 1 1/2 - 11 1/2 1.50 3.07 3.66 1.50 0.98 2.50 0.531 1.77 1/2-13 1/2-13 x 1.75 2.7
32GQ1B 32GQ1P 2 - 11 1/2 2.00 3.54 4.00 2.00 0.98 3.12 0.531 1.77 1/2-13 1/2-13 x 1.75 2.2
40GQ1B 40GQ1P 2 1/2 - 8 2.50 4.09 4.49 2.50 0.98 3.62 0.531 1.97 1/2-13 1/2-13 x 1.75 2.0
48GQ1B 48GQ1P 3 1/2 - 8 3.00 4.88 5.28 3.00 1.06 4.47 0.656 1.97 5/8-11 5/8-11 x 2.00 1.1
NPTF PORT / CODE 62 BLOCK FLANGE OR PAD
8GQ2B 8GQ2P 1/2 - 14 0.50 1.81 2.21 0.50 0.63 1.33 0.344 1.42 5/16-18 5/16-18 x 1.25 6.0
12GQ2B 12GQ2P 3/4 - 14 0.75 2.17 2.80 0.75 0.83 1.65 0.406 1.38 3/8-16 3/8-16 x 1.50 5.0
16GQ2B 16GQ2P 1 - 11 1/2 1.00 2.56 3.19 1.00 0.98 1.98 0.469 1.65 7/16-14 7/16-14 x 1.75 4.0
20GQ2B 20Q2P 1 1/4 - 11 1/2 1.25 3.07 3.75 1.25 1.06 2.36 0.531 1.77 1/2-13 1/2-13 x 1.75 3.5
24GQ2B 24GQ2P 1 1/2 - 11 1/2 1.50 3.70 4.41 1.50 1.18 2.68 0.656 1.97 5/8-11 5/8-11 x 2.25 3.0
32GQ2B 32GQ2P 2 - 11 1/2 2.00 4.50 5.28 2.00 1.46 3.38 0.781 2.56 3/4-10 3/4-10 x 2.75 2.5

1) See page L38 for standard stainless steel sizes and dimensions.
To receive mounting hardware with flange, insert a “K” after the material designator. Mounting hardware kits are available
for O-ring Face part numbers and include 4 bolts, 4 lock washers and an O-ring.

Dimensions and pressures for reference only, subject to change.

L18 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd
Catalog 4300 Hydraulic Flanges and Components
PDF Section Updated February 2017
and Dual Seal Flanges

G4Q
BSPP Port Block Adapter
BSPP Port / Code 61 or 62
Block Flange or Pad

O-ring Face Flat Face

VISUAL
INDEX
K Dynamic
TUBE FITTING T4 FLANGE DRILL T MOUNTING Pressure
PART # THREAD SIZE A B D F DIA. L M THREAD HARDWARE (x 1,000 PSI)
O-RING FACE FLAT FACE BSPP (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) UNC-2B SHCS SX SS
BSPP PORT / CODE 61 BLOCK FLANGE OR PAD
8G4Q1B 8G4Q1P 1/2-14 0.50 1.81 2.13 0.500 0.63 0.344 1.42 1.25 5/16-18 5/16-18 x 1.25 5.0
12G4Q1B 12G4Q1P 3/4-14 0.75 1.97 2.56 0.750 0.71 0.406 1.42 1.54 3/8-16 3/8-16 x 1.50 4.0
16G4Q1B 16G4Q1P 1-11 1.00 2.17 2.75 1.000 0.71 0.406 1.50 1.81 3/8-16 3/8-16 x 1.50 3.0
20G4Q1B 20G4Q1P 1 1/4-11 1.25 2.68 3.12 1.250 0.83 0.469 1.61 2.22 7/16-14 7/16-14 x 1.75 2.5
24G4Q1B 24G4Q1P 1 1/2-11 1.50 3.07 3.66 1.500 0.98 0.531 1.77 2.50 1/2-13 1/2-13 x 1.75 2.2
32G4Q1B 32G4Q1P 2-11 2.00 3.54 4.00 2.000 0.98 0.531 1.77 3.12 1/2-13 1/2-13 x 1.75 1.7
BSPP PORT / CODE 62 BLOCK FLANGE OR PAD
8G4Q2B 8G4Q2P 1/2-14 0.50 1.81 2.21 0.500 0.63 0.344 1.42 1.33 5/16-18 5/16-18 x 1.25 6.0
12G4Q2B 12G4Q2P 3/4-14 0.75 2.17 2.80 0.750 0.83 0.406 1.38 1.65 3/8-16 3/8-16 x 1.50 5.0
16G4Q2B 16G4Q2P 1-11 1.00 2.56 3.19 1.000 0.98 0.469 1.65 1.98 7/16-14 7/16-14 x 1.75 4.0
20G4Q2B 20G4Q2P 1 1/4-11 1.25 3.07 3.75 1.250 1.06 0.531 1.77 2.36 1/2-13 1/2-13 x 1.75 3.0
24G4Q2B 24G4Q2P 1 1/2-11 1.50 3.70 4.41 1.500 1.18 0.656 1.97 2.68 5/8-11 5/8-11 x 2.25 2.5
32G4Q2B 32G4Q2P 2-11 2.00 4.50 5.28 2.000 1.46 0.781 2.56 3.35 3/4-10 3/4-10 x 2.75 2.0

To receive mounting hardware with flange, insert a “K” after the material designator. Mounting hardware kits are avail-
able for O-ring Face part numbers and include 4 bolts, 4 lock washers and an O-ring.

Dimensions and pressures for reference only, subject to change.

L19 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd
Catalog 4300 Hydraulic Flanges and Components
PDF Section Updated February 2017
and Dual Seal Flanges

W5Q
Flat Weld Socket Block Connector, Pipe
Flat Weld Socket, Pipe / Code 61 or 62
Block Flange or Pad

O-ring Face Flat Face

K Dynamic VISUAL
TUBE FITTING PIPE FLANGE DRILL T MOUNTING Pressure INDEX
PART # SIZE SIZE A B D J DIA. L S THREAD HARDWARE (x 1,000 PSI)
O-RING FACE FLAT FACE (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) UNC-2B SHCS -SX -SS1
FLAT WELD SOCKET, PIPE / CODE 61 BLOCK FLANGE OR PAD
8W5Q1B 8W5Q1P 1/2 0.50 1.813 2.125 0.500 0.560 0.344 0.750 0.855 5/16-18 5/16-18 x 1.50 5.0
12W5Q1B 12W5Q1P 3/4 0.75 2.063 2.563 0.750 0.560 0.406 0.750 1.062 3/8-16 3/8-16 x 1.50 5.0
16W5Q1B 16W5Q1P 1 1.00 2.313 2.750 1.000 0.630 0.406 0.880 1.326 3/8-16 3/8-16 x 1.75 5.0
20W5Q1B 20W5Q1P 1 1/4 1.25 2.875 3.125 1.250 0.690 0.469 0.940 1.672 7/16-14 7/16-14 x 1.75 4.0
24W5Q1B 24W5Q1P 1 1/2 1.50 3.250 3.688 1.500 0.750 0.531 1.190 1.922 1/2-13 1/2-13 x 2.25 3.0
32W5Q1B 32W5Q1P 2 2.00 3.813 4.000 2.000 0.875 0.531 1.380 2.406 1/2-13 1/2-13 x 2.50 3.0
40W5Q1B 40W5Q1P 2 1/2 2.50 4.281 4.500 2.500 1.000 0.531 1.750 2.906 1/2-13 1/2-13 x 2.75 2.5
48W5Q1B 48W5Q1P 3 3.00 5.156 5.313 3.000 1.250 0.656 2.120 3.547 5/8-11 5/8-11 x 3.50 2.0
56W5Q1B 56W5Q1P 3 1/2 3.50 5.500 6.000 3.500 1.190 0.656 1.440 4.047 5/8-11 5/8-11 x 2.75 0.5
64W5Q1B 64W5Q1P 4 4.00 6.000 6.380 4.000 1.250 0.656 1.500 4.578 5/8-11 5/8-11 x 2.75 0.5
80W5Q1B 80W5Q1P 5 5.00 7.120 7.250 4.500 1.380 0.656 1.750 5.641 5/8-11 5/8-11 x 3.00 0.5
FLAT WELD SOCKET, PIPE / CODE 62 BLOCK FLANGE OR PAD
8W5Q2B 8W5Q2P 1/2 0.50 1.940 2.300 0.500 0.560 0.344 1.250 0.855 5/16-18 5/16-18 x 2.00 6.0
12W5Q2B 12W5Q2P 3/4 0.75 2.500 2.950 0.750 0.560 0.406 1.250 1.062 3/8-16 3/8-16 x 2.00 6.0
16W5Q2B 16W5Q2P 1 1.00 2.750 3.190 1.000 0.630 0.469 1.500 1.326 7/16-14 7/16-14 x 2.50 6.0
20W5Q2B 20W5Q2P 1 1/4 1.25 3.060 3.750 1.250 0.690 0.531 1.500 1.672 1/2-13 1/2-13 x 2.50 6.0
24W5Q2B 24W5Q2P 1 1/2 1.50 3.750 4.440 1.500 0.750 0.656 1.750 1.922 5/8-11 5/8-11 x 3.00 6.0
32W5Q2B 32W5Q2P 2 2.00 4.500 5.250 2.000 0.875 0.781 1.750 2.406 3/4-10 3/4-10 x 3.00 6.0
40W5Q2B2 40W5Q2P2 2 1/2 2.50 5.870 6.870 2.500 1.000 0.906 2.060 2.906 7/8-9 7/8-9 x 3.50 3.0
48W5Q2B2 48W5Q2P2 3 3.00 7.000 8.500 3.000 1.250 1.156 2.620 3.547 1 1/8-7 1 1/8-7 x 4.50 3.0

1) See page L39 for standard stainless steel sizes and dimensions.
2) Not covered in SAE J518. Bolt hole centerline dimensions are: 2.312” x 4.875” for 40W5Q2 and 2.812” x 6.000” for 48W5Q2.
To receive mounting hardware with flange, insert a “K” after the material designator. Mounting hardware kits are available for
O-ring Face part numbers and include 4 bolts, 4 lock washers and an O-ring.

Dimensions and pressures for reference only, subject to change.

L20 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd
Catalog 4300 Hydraulic Flanges and Components
PDF Section Updated February 2017
and Dual Seal Flanges

W4Q
Flat Weld Socket Block Connector, Tube
Flat Weld Socket, Tube / Code 61 or 62
Block Flange or Pad

O-ring Face Flat Face

VISUAL
INDEX
K Dynamic
TUBE FITTING TUBE FLANGE DRILL T MOUNTING Pressure
PART # O.D. SIZE A B D J DIA. L S THREAD HARDWARE (x 1,000 PSI)
O-RING FACE FLAT FACE (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) UNC-2B SHCS -SX -SS
FLAT WELD SOCKET, TUBE / CODE 61 BLOCK FLANGE OR PAD
12W4Q1B 12W4Q1P 3/4 0.75 2.06 2.56 0.625 0.560 0.406 0.750 0.752 3/8-16 3/8-16 x 1.50 5.0
16-12W4Q1B 16-12W4Q1P 1 0.75 2.06 2.56 0.750 0.560 0.406 0.750 1.002 3/8-16 3/8-16 x 1.50 5.0
16W4Q1B 16W4Q1P 1 1.00 2.31 2.75 0.875 0.630 0.406 0.880 1.002 3/8-16 3/8-16 x 1.75 5.0
20-16W4Q1B 20-16W4Q1P 1 1/4 1.00 2.31 2.75 1.000 0.630 0.406 0.880 1.252 3/8-16 3/8-16 x 1.75 5.0
20W4Q1B 20W4Q1P 1 1/4 1.25 2.88 3.12 1.125 0.690 0.469 0.940 1.252 7/16-14 7/16-14 x 1.75 4.0
24-20W4Q1B 24-20W4Q1P 1 1/2 1.25 2.88 3.12 1.250 0.690 0.469 0.940 1.502 7/16-14 7/16-14 x 1.75 4.0
24W4Q1B 24W4Q1P 1 1/2 1.50 3.25 3.69 1.375 0.750 0.531 1.190 1.502 1/2-13 1/2-13 x 2.25 3.0
28-24W4Q1B 28-24W4Q1P 1 3/4 1.50 3.25 3.69 1.500 0.750 0.531 1.190 1.752 1/2-13 1/2-13 x 2.25 3.0
32W4Q1B 32W4Q1P 2 2.00 3.81 4.00 1.875 0.875 0.531 1.375 2.002 1/2-13 1/2-13 x 2.50 3.0
36-32W4Q1B 36-32W4Q1P 2 1/4 2.00 3.81 4.00 2.000 0.875 0.531 1.375 2.252 1/2-13 1/2-13 x 2.50 3.0
FLAT WELD SOCKET, TUBE / CODE 62 BLOCK FLANGE OR PAD
12W4Q2B 12W4Q2P 3/4 0.75 2.38 2.81 0.625 0.560 0.406 1.250 0.752 3/8-16 3/8-16 x 2.00 6.0
16-12W4Q2B 16-12W4Q2P 1 0.75 2.38 2.81 0.750 0.560 0.406 1.250 1.002 3/8-16 3/8-16 x 2.00 6.0
16W4Q2B 16W4Q2P 1 1.00 2.75 3.19 0.875 0.630 0.469 1.500 1.002 7/16-14 7/16-14 x 2.25 6.0
20-16W4Q2B 20-16W4Q2P 1 1/4 1.00 2.75 3.19 1.000 0.630 0.469 1.500 1.252 7/16-14 7/16-14 x 2.25 6.0
20W4Q2B 20W4Q2P 1 1/4 1.25 3.06 3.75 1.125 0.690 0.531 1.500 1.252 1/2-13 1/2-13 x 2.50 6.0
24-20W4Q2B 24-20W4Q2P 1 1/5 1.25 3.06 3.75 1.250 0.690 0.531 1.500 1.502 1/2-13 1/2-13 x 2.50 6.0
24W4Q2B 24W4Q2P
28-24W4Q2B 28-24W4Q2P
1 1/2
1 3/4
1.50
1.50
3.75 4.44 1.375 0.750 0.656 1.750 1.502 5/8-11
3.75 4.44 1.500 0.750 0.656 1.750 1.752 5/8-11
5/8-11 x 2.75
5/8-11 x 2.75
6.0
6.0 L
32W4Q2B11 32W4Q2P11 2 2.00 4.50 5.25 1.875 0.875 0.781 1.750 2.002 3/4-10 3/4-10 x 3.00 6.0
36-32W4Q2B11 36-32W4Q2P11 2 1/4 2.00 4.50 5.25 2.000 0.875 0.781 1.750 2.252 3/4-10 3/4-10 x 3.00 6.0

1) Not covered in SAE J518.

To receive mounting hardware with flange, insert a “K” after the material designator. Mounting hardware kits are available for
O-ring Face part numbers and include 4 bolts, 4 lock washers and an O-ring.

Dimensions and pressures for reference only, subject to change.

L21 Parker Hannifin Corporation

Tube Fittings Division
Columbus, Ohio
http://www.parker.com/tfd