Scribd Logo
Upload

Welcome to Scribd!

  • 36 views

    DS1211 Nonvolatile Controller X 8 Chip: Features Pin Assignment

    Uploaded by

    Charbel Tadros
    The DS1211 chip converts CMOS RAMs into nonvolatile memories by unconditionally write protecting the RAMs when power is out of tolerance and automatically switching to a battery backup. It provides control for up to eight CMOS RAMs using a 3-8 decoder and consumes less than 100 nA of battery current. The chip monitors power, protects the RAMs during failures, and switches to a battery to maintain memory contents without power.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    DS1211 Nonvolatile Controller X 8 Chip: Features Pin Assignment

    Uploaded by

    Charbel Tadros
    36 views1 page
    The DS1211 chip converts CMOS RAMs into nonvolatile memories by unconditionally write protecting the RAMs when power is out of tolerance and automatically switching to a battery backup. It provides control for up to eight CMOS RAMs using a 3-8 decoder and consumes less than 100 nA of battery current. The chip monitors power, protects the RAMs during failures, and switches to a battery to maintain memory contents without power.

    Original Title

    DS1211

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The DS1211 chip converts CMOS RAMs into nonvolatile memories by unconditionally write protecting the RAMs when power is out of tolerance and automatically switching to a battery backup. It provides control for up to eight CMOS RAMs using a 3-8 decoder and consumes less than 100 nA of battery current. The chip monitors power, protects the RAMs during failures, and switches to a battery to maintain memory contents without power.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    36 views1 page

    DS1211 Nonvolatile Controller X 8 Chip: Features Pin Assignment

    Uploaded by

    Charbel Tadros
    The DS1211 chip converts CMOS RAMs into nonvolatile memories by unconditionally write protecting the RAMs when power is out of tolerance and automatically switching to a battery backup. It provides control for up to eight CMOS RAMs using a 3-8 decoder and consumes less than 100 nA of battery current. The chip monitors power, protects the RAMs during failures, and switches to a battery to maintain memory contents without power.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    DS1211

    Nonvolatile Controller x 8 Chip


    www.dalsemi.com

    FEATURES PIN ASSIGNMENT


     Converts full CMOS RAMs into nonvolatile VBAT1 1 20 VCCI
    memories
     Unconditionally write protects when VCC is VCCO 2 19 VBAT2

    out of tolerance TOL 3 18 CE


     Automatically switches to battery when
    PF 4 17 CE0
    power-fail occurs
    VBAT1 1 20
     3 to 8 decoder provides control for up to eight CE7 5 16 CE1
    VCCI
    VCCO 2 19 VBAT2
    CMOS RAMs CE6 CE2 TOL 3 18 CE
    6 15
     Consumes less than 100 nA of battery current PF 4 17 CE0
     Tests battery condition on power-up C 7 14 CE3 CE7 5 16 CE1
     Provides for redundant batteries B 8 13 NC
    CE6 6 15 CE2
     Power-fail signal can be used to interrupt C 7 14 CE3
    A 9 12 CE4 B 8 13 NC
    processor on power failure
    A 9 12 CE4
     Optional 5% or 10% power-fail detection GND 10 11 CE5
    GND 10 11 CE5
     Optional 20-pin SOIC surface mount package
    20-Pin DIP (300-mil) 20-Pin SOIC (300-mil)
     Optional industrial temperature range of See Mech. Drawings See Mech. Drawings
    -40°C to +85°C Section Section
    PIN DESCRIPTION
    A, B, C - Address Inputs
    CE - Chip Enable Input
    CE0 - CE7 - Chip Enable Outputs
    GND - Ground
    VBAT1 - + Battery 1
    VBAT2 - + Battery 2
    TOL - Power Supply Tolerance
    VCCI - +5V Supply
    VCC0 - RAM Supply
    PF - Power-fail
    NC - No Connection

    DESCRIPTION
    The DS1211 Nonvolatile Controller x 8 Chip is a CMOS circuit which solves the application problem of
    converting CMOS RAMs into nonvolatile memories. Incoming power is monitored for an out-of-
    tolerance condition. When such a condition is detected, the chip enables are inhibited to accomplish write
    protection and the battery is switched on to supply RAMs with uninterrupted power. Special circuitry
    uses a low-leakage CMOS process which affords precise voltage detection at extremely low battery
    consumption.

    By combining the DS1211 nonvolatile controller/decoder chip and lithium batteries, nonvolatile RAM
    operation can be achieved for up to eight CMOS memories.

    See the data sheet for the DS1212 Nonvolatile Controller x 16 Chip for electrical specifications and
    operation.
    1 of 1 111899

    You might also like