Untitled Document Sida 1 av 10

A300/A300H  All-Wheel
Steer Loaders
Copyright© 2000 - 2011 Bobcat A5GY 11001 — A5GY 19999
Europe 04/04/2008

Dimensions
 

(A) Operating height 4079 mm

(B) Height with operator cab 2055 mm
(C) Angle of Departure 25°
(D) Ground clearance 221 mm
(E) Wheelbase 1227 mm
(F) Length without attachment 2908 mm
(G) Length with standard bucket 3630 mm
(H) Rollback at ground position 30°
(I) Dump height with standard bucket 2517 mm
(J) Height to bucket hinge pin 3272 mm
(K) Dump reach at maximum height 859 mm
(L) Dump angle at maximum height 41.9°
(M) Rollback fully raised at maximum height 96.1°
(N) Bucket width, 68–inch 1727 mm
(N) Bucket width , 74–inch 1880 mm
(N) Bucket width, 80–inch 2032 mm
(O) Turning radius in AWS mode without attachment 3482 mm
(O) Turning radius in AWS mode with standard bucket 3823 mm
(O) Turning radius in SS mode with standard bucket 2141 mm
(P) Track, 12-16.5 tyres 1580 mm
(P) Track, 33 x 15.5-16.5 tyres 1631 mm
(Q) Width over tyres, 12-16.5, 12 ply 1885 mm
(Q) Width over tyres, 33 x 15.5-16.5, 12 ply 2014 mm

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 2 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Machine Rating
 
Lift breakout force 2446 daN
Tilt breakout force 2224 daN
Rated operating capacity 1362 kg
Tipping load 2772 kg
Axle torque 8076 Nm

Function Time
 
Raise lift arms 4.53 s
Lower lift arms 3.55 s
Bucket rollback 2.15 s
Bucket dump 2.61 s
Wheel cycle time (left/right turn) 1.4 s

Weights
 
Operating weight, A300 3934 kg
Operating weight, A300H 3954 kg
Shipping weight 3538 kg

Engine
 
Make / Model Kubota V3800-DI-T-E3
Fuel Diesel
Cooling Liquid
Power at 2400 RPM 58 kW
Rated speed (EEC 80/1269, ISO 9249) 2400 RPM
Torque at 1500 RPM (SAE JI 995 298 Nm
Gross)
Number of cylinders 4
Displacement 3769 cm 3
Bore 100 mm
Stroke 120 mm
Lubrication Gear Pump Pressure
Crankcase ventilation Open Breathing
Air filter Dry replaceable cartridge with separate safety element
Ignition Diesel-compression
Starting aid Glow Plugs

Electrical
 
Alternator Belt driven — 90 A — open with internal regulator
Battery 12 V — 950 cold cranking A at -18°C — 180 min reserve 
capacity
Starter 12 V — gear reduction type — 3.0 kW

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 3 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Hydraulic System
 
Pump type Engine driven, gear type
Pump capacity – A300 78.4 l/min
Pump capacity – A300H 151 l/min
Steering pump 51.5 l/min
System relief at quick couplers 22.4–23.1 MPa
Control valve Three-spool, open-centre type with float detent on lift and
electrically controlled auxiliary spool
Hydraulic filter Full-flow replaceable — 3 µm synthetic media element
Steering filter In-line replaceable filter
Fluid lines SAE standard tubelines, hoses, and fittings

Hydraulic Cylinders
 
Lift cylinder (2) Double-acting
Lift cylinder bore 76.2 mm
Lift cylinder rod 41.1 mm
Lift cylinder stroke 647.0 mm
Tilt cylinder (2) Double-acting with cushioning feature on dump and rollback
Tilt cylinder bore 76.2 mm
Tilt cylinder rod 38.1 mm
Tilt cylinder stroke 384 mm 
Steering cylinder (4) Double-acting
Steering cylinder bore 50.8 mm
Steering cylinder rod 25.4 mm
Steering cylinder stroke 123 mm

Drive System
 
Transmission Infinitely variable tandem hydrostatic piston pumps, driving
two fully reversing hydrostatic motors
Final drive chains Pre-stressed #120 HSOC endless roller chain (no master
link) and sprockets in sealed chaincase with oil lubrication.
(Chains do not require periodic adjustments.) Two chains
per side with no idler sprocket.
Main drive Fully hydrostatic four-wheel drive
Axle size 70.1 mm, heat treated. Axle tubes welded to chaincase.
Labyrinth axle seal protection. 
Wheel bolts Eight 9/16–inch wheel bolts fixed to axle hubs

Traction
 
Standard tyres 12-16.5 — 12-ply — Bobcat heavy duty
Severe duty tyres 12-16.5 — 12-ply — Bobcat severe duty
Severe Duty Poly Fill tyres 12-16.5 — 12-ply — Bobcat severe Duty Poly Fill
Float tyres 33 x 15.5-16.5 — Bobcat Super flotation
Sand and turf tyres 33 x 15.5-16.5 — Bobcat Turf and Sand
Travel speed — inching 6.4 km/h
Travel speed — low 11.1 km/h
Travel speed — high 19.1 km/h
Travel speed — maximum reverse 11.1 km/h

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 4 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Fluid Capacities
 
Chaincase reservoir capacity 41.6 l
Cooling system capacity with heater 17.1 l
Cooling system capacity without heater 13.6 l
Engine oil with filter capacity 11.4 l
Fuel tank capacity 87.1 l
Hydraulic reservoir capacity 17.8 l
Hydraulic / Hydrostatic system capacity 49.2 l

Fluid Specifications
 
Engine coolant Bobcat PG Coolant
5 L can - 6904844A
25 L container - 6904844B
209 L drum - 6904844C
1000 L tank - 6904844D
Engine oil Oil must meet API Service Classification of CD, CE, CF4,
CG4, or better.
Recommended SAE viscosity number for anticipated
temperature range.

* Can be used only when available with appropriate diesel

rating.
For synthetic oil use the recommendation from the oil
manufacturer.
Hydraulic fluid Bobcat Superior SH
5 L can - 6904842A
25 L container - 6904842B
209 L drum - 6904842C
1000 L tank - 6904842D
Bobcat Bio Hydraulic
5 L can - 6904843A
25 L container - 6904843B
209 L drum - 6904843C
1000 L tank - 6904843D

Controls
 
Engine speed Hand lever and foot accelerator pedal
Starting Keyless start switch, function error, and shutdown. Air
intake heater automatically activated by Standard or Deluxe
instrument panel.
Front auxiliary (standard) Electrical switches on right-hand joystick
Rear auxiliary (optional) Electrical switch on left-hand joystick

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 5 av 10

Controls
 
Loader hydraulics tilt and lift Right-hand joystick (SJC)
Service brake Two independent hydrostatic systems controlled by left-
hand joystick
Secondary brake One of the hydrostatic transmissions
Parking brake, two-speed option Spring applied pressure release multi-disk brake activated
by rocker switch on centre instrument panel
Vehicle steering (AWS) Direction and speed controlled with left-hand joystick.
Pattern is a C-type.
Vehicle steering (SS) Direction and speed controlled with left-hand joystick.
Pattern is an S-type.
Auxiliary pressure release Pressure is relieved through the coupler block, push in and
hold for 5 s.

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 6 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Instrumentation
 
The following loader functions are monitored by a combination of gauges and warning lights in the
operator's line of sight. The system alerts the operator of monitored loader malfunctions by way of
audible alarm and visual warning lights.
Standard Instrument Panel
• Gauges
◦ Engine coolant temperature
◦ Fuel
◦ Hour-meter
• Warning lights
◦ Engine air filter
◦ Selectable Joystick Controls (SJC)
◦ Engine coolant temperature
◦ Engine oil pressure
◦ Fuel level
◦ Hydraulic filter
◦ Hydraulic oil temperature
◦ Hydrostatic charge pressure
◦ Seat belt
◦ System voltage
• Indicators
◦ Attachment control device
◦ Bobcat Interlock Control System
◦ Air intake heater
Deluxe Instrument Panel (Option)
Same gauges, warning lights and other features as Standard Instrument Panel, plus:
• Bar-type gauges
◦ Engine oil pressure
◦ System voltage
◦ Hydrostatic charge pressure
◦ Hydraulic oil temperature
• Additional features
◦ Keyless start with password capability
◦ Digital clock
◦ Job clock
◦ Attachments information
◦ Digital tachometer
◦ High Flow lockouts
◦ Multi-language display
◦ Help screens
◦ Diagnostic capability
◦ Engine/hydraulic systems shutdown function

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 7 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Serviceability
 
Access is available to the following through the rear door/tailgate and rear screen:
• Air cleaner
• Alternator
• Battery
• Cooling system (engine oil and hydraulic oil coolers easily separable for cleaning)
• Engine oil and fuel filters
• Engine oil drain and dipstick
• Hydraulic oil fill (access at the side of the machine)
• Starter
Axle hubs provide protection for the axle seals
Bob-Tach™ pivots have replaceable wear bushings
Easy access to all lift arm grease points
Rod end of the tilt cylinder has a replaceable bushing
Tailgate has an optional lock for vandal-proofing
Tailgate is equipped with door-stop to hold door open while servicing
Tip-up operator cab gives access to certain hydraulic system components

Standard Features
 
• Two-speed travel
• Adjustable suspension seat
• Automatically activated glow-plugs
• Auxiliary hydraulics: variable flow/maximum flow
• Bob-Tach™ frame
• Bobcat Interlock Control System (BICS)
• Deluxe operator cab *
Includes interior cab foam, top and rear windows , Deluxe wire harness, dome light, and
electrical power port
• Heated enclosed cab
• Dual steering mode: All Wheel Steer (AWS) and Skid Steer (SS)
• Operating lights, front and rear
• Hydraulic bucket positioning kit
• Instrumentation
• Lift arm support
• Parking brake
• Rocker-switch activated glow plugs
• Seat belt with three-point fixing
• Seat bar
• Turbo-charger with approved spark arrestor
• Tyres: 12-16.5 — 12-ply
• CE certification
• Warranty: 12 months or 2000 hours
* Roll Over Protective Structure (ROPS) – meets requirements of SAE-J1040 and ISO 3471; Falling
Object Protective Structure (FOPS) - meets requirements of SAE-J1043 and ISO 3449, Level I

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 8 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Options
 
• Factory Options
◦ High-Flow hydraulics
◦ Power Bob-Tach™
◦ Air conditioning
◦ Deluxe instrument panel
◦ Severe Duty tyres — 12.00 x 16.5 — 12-ply,
◦ Severe Duty Poly Fill tyres — 12.00 x 16.5 — 12-ply,
◦ Super float tyres — 33 x 15.5 x 16.5 — 12-ply
◦ Turf and Sand tyres — 33 x 15.5 x 16.5 — 12-ply
• Dealer Installed Accessories
◦ Special applications kit
◦ Catalytic purifier kit
◦ Single-point lift kit
◦ Back up alarm kit
◦ Keyless ignition switch
◦ Fresh air heater kit
◦ Plumbing kit for fresh air heater
◦ Bob-Tach™ frame
◦ Replacement operator cab structure
◦ Suspension seat
◦ Water level sensor kit
◦ FOPS structure **
** Falling Objects Protective Structure (FOPS) – meets requirements of SAE-J1043 and ISO 3449,
Level II

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 9 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Attachments
 
For specific model availability, see Bobcat Product Price List.
• •
Angle blade Pallet fork – hydraulic
• •
Angle broom*† Pallet fork – standard
• •
Auger Planer*
• •
Backhoe Salt and sand spreader
• •
Box blade Scarifier
• •
Brushcat rotary cutter Snow blower*
• •
Buckets Sod layer*
• •
Chipper* Soil conditioner*
• •
Combination bucket Stump grinder*
• •
Concrete pump* Super scraper
• •
Cutter crusher* Sweeper
• •
Digger Three-point hitch
• •
Dozer blade* Tiller
• •
Dumping hopper Tilt-Tatch™
• •
Ejector bucket Tree transplanter*
• •
Farm grapple Trench compactor
• •
Grader* Trencher
• •
Hydraulic breaker** Utility frame
• •
Industrial grapple Wheel saw
• •
Landplane Whisker broom
• •
Landscape rake Vibratory roller
•
Mixing bucket*
*Attachment control kit required.
**When operating the loader with this attachment, a Special Applications Kit, which includes a
12 mm Lexan front door with 6 mm top and rear windows, must be used.
†Optional water kit.

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18
Untitled Document Sida 10 av 10

A300/A300H  All-Wheel Steer Loaders — 04/04/2008

Environmental
 
Operator L pA (98/37 & 474-1) 85 dB(A)
Noise level L WA (EU Directive 101 dB(A)
2000/14/EC)
Whole body vibration (ISO 2631–1) —
Hand-arm vibration (ISO 5349–1) —

Safety
 
Bobcat Interlock Control System Requires the operator to be seated in the loader with the
(BICS), standard seat bar in place and the engine running. After the operator
presses the “Press to Operate Loader” button, the loader's
hydraulic lift and tilt functions and traction drive can be
operated.
Lift arm bypass control, standard Used to lower the lift arms in the event that the lift arms
cannot be lowered during normal operating conditions.
Seat belt, standard Should always be worn when operating the loader. Three-
point shoulder belt provides restraint for high range speeds.
Seat bar, standard Secondary operator restraint, also serves as an arm rest.
Operator cab, standard An enclosed operator cab with side screens with a minimal
inside cab width of 838 mm. Meets SAE-J1040 and ISO
3471 for Roll Over Protective Structure (ROPS) and SAE-
J1043 and ISO 3449 Level I * for Falling Objects Protective
Structure (FOPS). Level II ** option is available.
Lift arm support, standard Use for servicing when lift arms are raised.
Parking brake, standard Always set brake when leaving loader.
Grab handles, standard Should always be used when entering/exiting loader.
Safety tread, standard Slip resistant tread on lift arms and main frame to be used
when entering/exiting loader.
Attachment steps, standard Should always be used when entering/exiting loader.
Rear window, standard For emergency exit.
Front and rear work lights, standard Use for indoor and low light operation.
Back-up alarm, optional For use in areas with high traffic
Lift kits, optional Lift kits are available so loader may be lifted into remote
areas.
Special applications kit, optional Restricts objects and material from entering cab openings.
Operator handbook, standard Weather-resistant operator handbook attached to the inside
of the cab, providing operational instructions and warnings
decals with pictorials and international symbols.
* Level I — Acceptance is intended for protection from falling bricks, small concrete blocks, and
hand tools encountered in operations such as highway maintenance, landscaping, and other
construction site services.
** Level II — Acceptance is intended for protection from falling trees or rocks for machines
involved in site clearing, overhead demolition, or forestry.

http://www.bobcatnet-esa.com/xdoc/xspecs/all_wheel_steer_loaders/LoadXML.html?... 2011-05-18