PARTS MANUAL

MODEL 1750-C
Covers Serial Number Range:

942-N-75TCW5Y2-02942 Through __________________

SOLD & SERVICED BY

Calder Brothers Corporation Serial Number Range: Page 1
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver

TABLE OF CONTENTS

ITEM PAGE

Quick order page............................................................................... 2

Center hopper ................................................................................... 4
Right side hopper .............................................................................. 5
Left side hopper ................................................................................ 6
Engine compartment ......................................................................... 7
Engine assembly right side ............................................................... 8
Engine assembly left side.................................................................. 9
Screed assembly rear ....................................................................... 10
Screed assembly front ...................................................................... 11
End gate assembly ............................................................................ 12
Match height and slope components ................................................ 13
Flight chain assembly ........................................................................ 14
Hydraulic components ....................................................................... 15
Operators station ............................................................................... 16
Control panel ..................................................................................... 17
Constant ignite system ...................................................................... 18
Propane system ................................................................................ 19
Track drive system ............................................................................ 20
Walk boards/operator convenience ................................................... 21
Electrical System Schematic ............................................................. Appendix A
Main Hydraulic Circuit Schematic...................................................... Appendix B
Feeder System Hydraulic Circuit Schematic ..................................... Appendix C
Cylinder Hydraulic Circuit Schematic ................................................ Appendix D
Calder Brothers Corporation Serial Number Range: Page 2
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver

QUICK ORDER PAGE

Auger, Hanger Assembly ........................................ 112-302080

Auger, Lower (LH) ..................................................... 092-0014
Auger, Lower (RH) .................................................... 092-0013
Auger, Upper (LH) .................................................. 112-302551
Auger, Upper (RH) ................................................. 112-302550
Battery .................................................................... 020-0369
Cap (Fuel Tank) ........................................................ 050-0522
Cap (Hydraulic Tank) ................................................. 060-0069
Cap (W ash Down Tank ) ................................ .............. 050-0522
Coupling Chain, Lower Auger ...................................... 015-0045
Coupling Half, Lower Auger ....................................... 015-0154
Coupling Chain, Upper Auger ...................................... 091-0073
Coupling Half, Upper Auger ..................................... 015-302554
Decal Kit ................................................................. 024-0027
Cut Off Plate (1’LH)................................................ 111-200215
Cut Off Plate (1’RH) ............................................... 111-200214
Cut Off Plate (2’ LH)............................................... 111-200217
Cut Off Plate (2’ RH) .............................................. 111-200216
Cut Off Plate (3’ LH)............................................... 111-200219
Cut Off Plate (3’ RH) .............................................. 111-200218
Filter, Air Primary ..................................................... 021-0234
Filter, Air Secondary ................................................. 021-0235
Filter, Engine Oil ...................................................... 021-0101
Filter, Fuel (In-Line) .................................................. 021-0100
Filter, Fuel / W ater Separator (Spin -On) ...................... 021-0099
Filter, Hydraulic Oil Charge ........................................ 021-0169
Filter, Hydraulic Oil Return ......................................... 021-0196
Flight Chain ............................................................. 093-0121
Flight Chain Bar........................................................ 015-0258
Flight Chain Bearing .................................................. 018-0091
Flight Chain Rivet ..................................................... 015-0259
Fuel Sender ............................................................. 020-0174
Igniter hot surface..................................................... 020-0562
Key Switch .............................................................. 020-0156*
Lighting Torch Assembly ............................................ 090-0231
Motor, Flight Chain.................................................... 013-0070
Motor, Upper Auger ................................................... 013-0094
Motor, Lower Auger ................................................... 013-0096
Plastic, Front Hopper .............................................. 093-100760
Plastic Side Hopper ................................................ 093-408758
Plastic Hopper Scraper ........................................... 093-408838
Preventative Maintenance Kit (Air Cleaner/Pre Cleaner) .. 050-0389
Push Roller Assembly ................................................ 091-0006
Rubber Side Hopper ............................................... 093-408756
Screed Burner Assembly ............................................ 093-0217
Screed Plate ............................................................ 092-0301
Screed Plate (electric) .............................................. 092-0301E
Screed Extension Plate ........................................... 111-302280
Seat ..................................................................... 060-0049
Calder Brothers Corporation Serial Number Range: Page 3
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver

Spare Ke ys ................................ .............................. 020-0087

Spray Nozzle Assembly .............................................. 050-0361
Sprocket, Drive ......................................................... 015-0275
Sprocket, Idler Assembly ............................................ 050-0264
Strainer, Outlet (Hyd raulic Tank) ................................ . 021-0186
Track Roller (small frame) .......................................... 050-0257
Track Roller (large frame) .......................................... 050-0163
Ultra Sonic Sensor (LH) ............................................. 020-0535
Ultra Sonic Sensor (RH) ............................................ 020-0535A
Ultra Sonic Sensor Cord ............................................. 050-0350
Calder Brothers Corporation Serial Number Range: Page 4
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Center hopper

11&12

17 17

9&10
15
16 16

5
7&8
6

4 3 3 4
1
2

1. Push beam................................................................................................... 092-100512

2. Push beam bolt ........................................................................................... 030-0533
3. Push rollers (x2) .......................................................................................... 091-100776
4. Push roller shafts (x2) ................................................................................. 093-100778
5. Front bottom plastic ................................................................................... 093-100760
6. Front plastic, retaining bar.......................................................................... 093-100754
7. Side plastic .................................................................................................. 093-408758
8. Side plastic retaining bar............................................................................. 093-100752
9. Rubber mats(x2).......................................................................................... 093-408756
10. Rubber matt retaining bar(x2) .................................................................... 093-100750
11. Lights(x2) ..................................................................................................... 020-0491
12. Light mounting bracket(x2)......................................................................... 092-206010
13. Sight gauge holder(x2)(Not shown) ............................................................ 093-100672
a. Sight gauge rod(x2) ........................................................................ 093-100888
b. 5/16 wing bolt(x2).......................................................................... 030-0487
14. Front conveyor guard (bat wing)(not shown) ............................................. 092-408550
15. Conveyor center guard ............................................................................... 092-408530
16. Side conveyor guard ................................................................................... 092-408540
17. Plastic hopper scraper ................................................................................ 093-408838
Calder Brothers Corporation Serial Number Range: Page 5
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Right side hopper
 

11 12

13 7

10

4
17 
2
16  14
9

15  1
5  6

1. Hopper lift cylinder (x2) .............................................................................. 012‐0051 
2. Tow point cylinder (x2) ............................................................................... 012‐0065 
3. Tow point arm (x2) ...................................................................................... 093‐408106 
4. Tow point gauge (x2) .................................................................................. 092‐109080 
 Tow point gauge rod (x2) ............................................................... 092‐109082 
5. Sight gauge rod (x2) .................................................................................... 093‐100672 
6. Sight gauge holder (x2) ............................................................................... 093‐100888 
 5/16 wingbolt ................................................................................. 030‐0487 
7. Exhaust shield ............................................................................................. 093‐408246 
8. Exhaust stack............................................................................................... 010‐0566 
9. Fuel tank...................................................................................................... 092‐408060 
 Fuel sender..................................................................................... 020‐0174 
 Fuel pickup tube............................................................................. 019‐408060 
 Fuel tank cap .................................................................................. 050‐0522 
10. Louver assembly ......................................................................................... 092‐408260 
11. Light (x4) ..................................................................................................... 020‐0491 
12. Light mount bracket (x2) ............................................................................. 091‐206010 
13. Spray nozzle (x2) ......................................................................................... 050‐0361 
14. Plastic rub guard (x2) .................................................................................. 093‐107070 
15. Sonic sensor RH ........................................................................................... 020‐0535A 
 LH ................................................................................................... 020‐0535 
16. Sonic sensor cord ........................................................................................ 050‐0350 
17. Screed Lift Cylinder ..................................................................................... 012‐0061SP 
Calder Brothers Corporation Serial Number Range: Page 6
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Left side hopper
 

 
7  8

10

2
14 11
4
1  17 16
12 13

9
15

6  5  3 

1. Hopper cylinder (x2) ................................................................................... 012‐0051 
2. Tow point cylinder (x2) ............................................................................... 012‐0065 
3. Tow point arm (x2) ...................................................................................... 093‐408106 
4. Tow point gauge (x2) .................................................................................. 092‐109080 
 Tow point gauge rod (x2) ............................................................... 092‐109082 
5. Sight gauge rod (x2) .................................................................................... 093‐100672 
6. Sight gauge holder (x2) ............................................................................... 093‐100888 
 5/16 wing bolt ................................................................................ 030‐0487 
7. Light (x4) ..................................................................................................... 020‐0491 
8. Light mount bracket (x2) ............................................................................. 092‐206010 
9. Wash down tank ......................................................................................... 092‐408080 
 Wash down tank pick up tube ....................................................... 050‐0680 
 Wash down pump .......................................................................... 011‐0231 
 Wash down tank cap ...................................................................... 050‐0522 
10. Hydraulic tank ............................................................................................. 092‐408040 
 Hydraulic sight gauge ..................................................................... 060‐0066 
 Hydraulic tank cap ......................................................................... 060‐0069 
11. Hose reel ..................................................................................................... 050‐0344 
 Spray nozzle (x2) ............................................................................ 050‐0361 
12. Bankable hydraulic manifold ...................................................................... 017‐1042 
 Bankable section ............................................................................ 017‐1035 
13. Nylon rub guard (x2) ................................................................................... 093‐107070 
14. Beauty shield ............................................................................................... 093‐408046  
15. Sonic sensor LH ........................................................................................... 020‐0535 
 RH ................................................................................................... 020‐0535A 
16. Sonic sensor cord ........................................................................................ 050‐0350 
17. Screed Lift Cylinder ..................................................................................... 012‐0061SP 
Calder Brothers Corporation Serial Number Range: Page 7
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Engine compartment
 

26&27 
29
15&16
9
12 14

10 19 33

21 28 34&35 
6&7 
11
18

8
1
4&5  13

27 20
32 36

2&3  17
23 22

24

30&31 

1. Cummins engine 99hp ............... 010‐0556  23. Generator 

2. Control box ................................ 020‐0365   16kw ................. 020‐0622 
3. Control node .............................. 020‐0652   10kw  ................ 020‐0625 
4. Hydraulic charge filter ................ 021‐0169  24. Generator motor (Cummins) 017‐0229 
5. Hydraulic charge filter head ....... 021‐0233  a.  (John Deere) ......... 013‐0102 
6. Hydraulic return filter ................ 021‐0196  25. Hood strut (x2) ................... 050‐0658 
7. Hydraulic return assy ................. 021‐0181  26. Hood strut ball joint (x4) .... 050‐0659 
8. Air filter assembly ...................... 021‐0102  27. Hood bump stop ................ 030‐0520 
9. Muffler ....................................... 010‐0564   28. Cummins cooler assembly . 050‐0779 
10. Air inlet pipe ............................... 092‐408014  29. Horn ................................... 020‐0410 
11. Turbo to muffler pipe ................. 010‐408012  30. Battery ................................ 020‐0369 
12. Exhaust, muffler to outlet .......... 010‐408010  31. Battery door  ...................... 093‐408228 
13. Charge pipe to intercooler ......... 012‐408016  32. Jumper terminal (red) ........ 108880 
14. Charge pipe to manifold ............ 010‐408018  33. Fan motor ........................... 013‐0103 
15. Air cooler piping coupler (x5) ..... 010‐0569  34. Fan  ..................................... 010‐0691 
16. T bolt clamp 3.25” (x10) ............. 050‐0456  35. Fan shroud ......................... 092‐408330 
17. Radiator hose, 2”x2” 90° ............ 014‐0483  36. Coolant over flow tank ....... 091‐408350 
18. Radiator hose, reducer .............. 014‐0484   
19. Radiator hose, coupler ............... 014‐0485 
20. Coolant pipe radiator to engine  010‐408020 
21. Coolant pipe engine to radiator . 010‐408022 
22. Fuel filter w/ water separator .... 021‐0099 
 
Calder Brothers Corporation Serial Number Range: Page 8
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Engine assembly

7 8
10
15
9
1 6

12
5
2
14

13 11

2 3

1. Engine 99HP ................................................................................................ 010-0556

 Engine 84HP(not shown) ............................................................... 010-0557
2. Main drive pump......................................................................................... 011-0254
3. Electric generator pump ............................................................................. 011-0256
4. Tandem auxiliary pump (electric screed).................................................... 011-0260
5. Auxiliary pump (propane screed) ............................................................... 011-0154B
6. Alternator ................................................................................................... 010-0556A
7. Air filter ....................................................................................................... 021-0102
8. Secondary air filter ...................................................................................... 021-0235
9. Air filter mount ........................................................................................... 021-0102C
10. Air filter V band clamp ................................................................................ 021-0102B
11. Oil pressure switch ..................................................................................... 020-0370
12. Oil pressure switch constant ignite ............................................................ 020-0335
13. Oil pressure sender ..................................................................................... 020-0304
14. Oil filter ....................................................................................................... 021-0101
15. Coolant temperature sender ...................................................................... 020-0437
Calder Brothers Corporation Serial Number Range: Page 9
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Engine assembly

5
3 5

1. Fuel filter ............................................................................................. 021-0100

2. Air filter indicator ................................................................................. 021-0102A
3. Engine mount bracket rear .................................................................. 092-408286
4. Engine mount bracket front ................................................................. 093-408292
5. Rubber isolator ..................................................................................... 050-0789
6. Battery cable positive 49”(not shown) ................................................. 020-0626
7. Battery cable positive 10”(not shown) ................................................. 020-0627
8. Battery cable ground 48” (16kw)(not shown) ...................................... 020-0318
Calder Brothers Corporation Serial Number Range: Page 10
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Rear screed

11
20

10

12 4
13 5

16 6
8 9

3
8 9 17

2 7
1 7

1. Main screed plate (propane) ...................................................................... 092-0301

 Main screed plate (electric) ........................................................... 092-0301-e
2. Extension bottom (propane & electric)(x2) ................................................ 111-302280
3. End gate weldment RH ............................................................................... 112-302300
 LH ................................................................................................... 112-302301
4. End gate ratchet handle(x4) ....................................................................... 111-104170
5. Extension rods(x4) ...................................................................................... 112-302210
 Extension rod bushing ................................................................... 018-0044
6. Extension cylinder(x2) ................................................................................. 012-0068
 Pin(x2) ............................................................................................ 030-0413
7. Electric heating strip (for 10kw generator)(x6) .......................................... 020-0547
 Heating strip (for 16kw generator)(x6) .......................................... 020-0213
8. Electric screed terminal (x14) ..................................................................... 020-0569
9. Electric screed terminal face plate (x3) ...................................................... 020-0570
10. Screed tower handle (x2) ............................................................................ 092-0045C
11. Screed tower handle knob(x4) .................................................................... 113-100427
12. Match height motor(x2).............................................................................. 013-0082
13. Match height ratchet handle(x2) ................................................................ 111-104171
14. Seat post (not shown) ................................................................................. 112-100475
15. Seat (not shown) ........................................................................................ 060-0049
16. Crown Adjustment ratchet jack(x2) ............................................................ 050-0147A
17. Lights (x4) .................................................................................................... 020-0491
18. Electric screed control box (w/o outlet)(not shown).................................. 020-0563
19. Electric screed control node (not shown) ................................................... 090-0243E
20. Constant Ignite Kit ...................................................................................... 020-0577
21. Screed Burner Continuous Ignite (x6) ......................................................... 112-109290
Calder Brothers Corporation Serial Number Range: Page 11
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Screed Front
 

 
11 

10  8
15  5 

13  1

6  4  3 

9
 

1. Main auger RH ............................................................................................ 112-302550 
 Main auger LH ................................................................................ 112-302551
2. Extension auger RH ..................................................................................... 092‐0013 
 Extension auger LH ........................................................................ 092‐0014 
3. Extension auger chain .................................................................................  015-302554
4. Extension auger coupling ............................................................................ 015‐0154 
 Cast Iron heavy duty auger LH ....................................................... 015‐0288A 
 Cast Iron heavy duty auger RH....................................................... 015‐0289A 
 Coupler for cast iron augers ........................................................... 015‐0286 
5. Main Screed auger motors ......................................................................... 013‐0094 
6. Extension auger motors .............................................................................. 013‐0096 
7. Main auger chain ........................................................................................ 091‐0073 
8. Main auger coupler ..................................................................................... 015‐302554 
9. Auger hanger(x4) ........................................................................................ 112‐302080 
10. Screed arm RH ............................................................................................ 112‐302450 
 Screed arm LH ................................................................................ 112‐302451 
11. Operator station RH .................................................................................... 112‐100929 
 Operator station LH ....................................................................... 112‐100928 
12. Control stand locking handle (not shown) .................................................. 050‐0552 
13. Screed lift chain ........................................................................................... 015‐302450 
14. Manual box (not shown) ............................................................................. 050‐0560 
15. Sonic sensor RH ........................................................................................... 020‐0535A 
 Sonic sensor LH .............................................................................. 020‐0535 
Calder Brothers Corporation Serial Number Range: Page 12
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Rear screed

5
7

1. Nut .............................................................................................................. 5/8-18 grade 8

2. Endgate Adjustment Ratchet ...................................................................... 111-104170
3. Washer ........................................................................................................ 5/8 Grade 8
4. Spring .......................................................................................................... 050-0431
5. Threaded rod .............................................................................................. 112-302376
6. Threaded sleeve .......................................................................................... 112-302370
7. Endgate weldment RH ................................................................................ 112-302300
a. LH ................................................................................................... 112-302301
8. Endgate shoe RH ......................................................................................... 112-302390
a. LH ................................................................................................... 112-302391
Calder Brothers Corporation Serial Number Range: Page 13
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Match height and slope components

2
4 6

3
8

1. Extension slope guide support weldment .................................................. 112-302150

2. Bearing ........................................................................................................ 092-302006
3. Slope shaft .................................................................................................. 113-302190
4. Shaft guide .................................................................................................. 113-302172
5. Block ............................................................................................................ 113-302170
6. Pivot bushings ............................................................................................. 113-302152

Optional equipment
Power match height kit ............................................................................... 113-302506A
7. Motor .......................................................................................................... 013-0096
8. Coupler ........................................................................................................ 015-0286
9. Mount ......................................................................................................... 112-302050
Calder Brothers Corporation Serial Number Range: Page 14
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750C Conveyor assembly

8 8

12

13
8
8

3
5
4

1. Flight chain (x2)........................................................................................... 093-0121

 Individual flight bar ........................................................................ 015-0258
2. Flight chain motor (x2) ................................................................................ 013-0070
3. Flight chain motor bracket(x2).................................................................... 092-204250
4. Spline coupler(x2) ....................................................................................... 015-0203
5. Key way coupler .......................................................................................... 015-0202
6. Coupler chain .............................................................................................. 015-0046
7. Flight chain sprocket ................................................................................... 015-0204
8. Flight chain tube ......................................................................................... 093-0334
9. Flight chain drive shaft ................................................................................ 093-0332
10. Flight chain idler shaft................................................................................. 093-0333
11. Flight chain bearings (x8) ............................................................................ 018-0091
12. Dive motor cover plate ............................................................................... 093-100233
13. Flight chain motor cover plate .................................................................... 093-100234

1
Machines prior to 272-I-75TJT5Y2-02272 use 12 bars of flight, machines after use 13 bars.
Calder Brothers Corporation Serial Number Range: Page 15
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750C Hydraulic components

1. Bankable manifold ..................................................................................... 017-0163

2. 5 station manifold ...................................................................................... 017-0146
3. Counter balance block ................................................................................ 017-1029
4. Counter balance valve ................................................................................ 017-1028
5. Track tensioning block ................................................................................ 017-0197
6. Track tension check valve ........................................................................... 017-0198
7. Generator flow control body ...................................................................... 017-1049
8. Flow control cartridge ................................................................................. 017-1048
9. Flow control coil.......................................................................................... 017-1047
Calder Brothers Corporation Serial Number Range: Page 16
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750C Operator’s panel

1
3

1. Assembled panel RH ................................................................................... 091-103031

 LH (not shown) ..................................................................................... 091-103030
2. Safety handle .............................................................................................. 050-0205
3. Decal kit (includes decals for control box) .................................................. 024-0172
4. 6 pin receptical(not shown) ........................................................................ 050-0372
5. Sonic cord(not shown) ................................................................................ 050-0350
6. Red toggle extension (x4) ........................................................................... 020-0497
7. 4 function handheld remote (not shown) .................................................. 020-0503
8. Joy stick ....................................................................................................... 020-0271

Toggle switches
020-0423 020-0356 020-0405 020-0395 020-0083 020-0466
Pause RH auger auto/man RH auger I/O Screed RH conveyor Lights
Vibrators LH auger auto/man LH auger I/O Hopper LH conveyor
Conveyor Throttle RH extension
Horn LH extension
RH head of matrl.
LH head of matrl.
Tow point LH
Tow point RH
RH match height
LH match height
Calder Brothers Corporation Serial Number Range: Page 17
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750C Control dash

1. Key switch ................................................................................................... 020-0156

2. 12V accessory.............................................................................................. 020-0467
3. E stop button .............................................................................................. 020-0463
4. Display ......................................................................................................... 020-0641
5. Node............................................................................................................ 020-0652
6. Decal kit (includes decals for operator stations) ........................................ 024-0172

Toggle switches

020-0423 020-0356 020-0395 020-0405

Toggle display Operator station select Throttle Wash down
High/low speed
Steering select L/R
Calder Brothers Corporation Serial Number Range: Page 18
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Generator Control Box

3
4 4

4 5
1
2

6 7

1. Control panel .............................................................................................. 090-0243E

2. 220V power outlet ...................................................................................... 050-0463
3. Enclosure box (bare) ................................................................................... 123712
4. Solid state relays (x6) .................................................................................. 020-0602
5. 40A relay ..................................................................................................... E0141
6. Circuit breaker 15amp (x6) ......................................................................... E0128-1
7. Circuit breaker 25amp (x4) ......................................................................... E0128-3
Calder Brothers Corporation Serial Number Range: Page 19
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Constant ignite system

1 4

5 6

Constant Ignite Kit ................................................................................................ 020-0577

Enclosure Parts

1. Plastic Enclosure (bare) .............................................................................................. 130112

2. Enclosure base plate (not shown) .............................................................................. 020-109160
3. TDR Relay .................................................................................................................. 020-0564
4. 12v Relay (x3) ............................................................................................................. EO141
5. Toggle Switch ............................................................................................................ 020-0087
6. Indicator Light (x2) .................................................................................................... 020-0140
7. Wire Harness enclosure to glow plugs (x2) (not shown) ........................................... 020-0574
8. Igniters (x6) (not shown) ............................................................................................ 020-0562
Calder Brothers Corporation Serial Number Range: Page 20
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Constant ignite system

3 1
5
2

Burner Parts
1. Burner glow plug (x4) ................................................................................................. 020-0562
2. Long Orifice (x6) ........................................................................................................ 050-0269
3. Electric Solenoid (x2 ) ................................................................................................. 017-0211
4. Lighting Torch Assembly ............................................................................................ 090-0231
5. Regulator ................................................................................................................... 050-0418
6. Gauge, regulator ........................................................................................................ 050-0419
7. Propane Tank ............................................................................................................. 050-0039
8. Safety strap ................................................................................................................ 050-0649
Calder Brothers Corporation Serial Number Range: Page 21
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Track drive system

12
2
1
9 13 10 11
10
10

5 6 7 8

1. Undercarriage weldment LH ....................................................................... 092-205591

 RH ................................................................................................... 092-205590
2. Planetary (x2) .............................................................................................. 016-0058
3. Drive motor (x2)(not shown) ...................................................................... 011-0263
4. Berco track kit (includes tracks, rollers, sprockets) .................................... 080-0273
5. Berco track chain poly pads (x2) ................................................................. 050-0673
 Extreme pad track chain ................................................................ 050-0673EX
6. Connecting pin (x2) ..................................................................................... 015-0276
7. Poly track pad (x72) .................................................................................... 050-0664
 Extreme poly track pad .................................................................. 050-0664EX
 Steel track pad .............................................................................. 050-0664-STL
8. Track pad bolt (x288) .................................................................................. 030-0500
 Nut ................................................................................................. 030-0501
9. Idler roller with brackets (x2)...................................................................... 050-0624
10. Roller small (x24) ........................................................................................ 050-0257
11. Roller large (x2) ........................................................................................... 050-0163
12. Sprocket wheel drive (x2) ........................................................................... 050-0275
13. Track tension cylinder (x2) .......................................................................... 012-0060
Calder Brothers Corporation Serial Number Range: Page 22
942-N-75TCW5Y2-02942 thru ____________________ Model: 1750-C Conveyor Paver
1750-C Walk boards

6 6

7 7
5 5

4
8 8

2 2
1

1. Main walk board (3 man)(23in wide).......................................................... 112-302610

 Main walk board (2 man)(12in wide) ............................................ 112-302600
2. Walk board extensions ............................................................................... 112-100701
3. Middle walk board ...................................................................................... 112-302530
4. Upper walk board (propane) ...................................................................... 112-302520A
 Upper walk board (electric) ........................................................... 112-302520E
5. Operator’s foot rests................................................................................... 112-302474
6. Seat ............................................................................................................. 060-0049
7. Swivel .......................................................................................................... 050-0383
8. Seat post ..................................................................................................... 112-100475
 CALDER BROTHERS CORPORATION

(LIMITED) PRODUCT WARRANTY

Calder Brothers Corporation warrants that the Paver, Roller, Tank or Grader
under this program will be free from defects in material and workmanship for a
period of(12) twelve months from the date of installation. Written notice of any
claimed defect must be given to Calder Brothers Corporation within the warranty
period and within (30) thirty days after such defect is discovered. Liability under
this warranty is limited to replacing or repairing at Calder Brothers Corporation
election, any part or parts deemed defective after examination by Calder
Brothers Corporation or an Authorized Service Representative via prepaid
transportation for which is found to be defective, will be repaired or replaced and
returned to the customer via prepaid surface transportation within the United
States. Should any part be found not defective, inspection and handling may be
charged to the customer by Mauldin or an Authorized Service Representative.

EXCLUSIONS:
This warranty does not apply to routine wearable parts of the Mauldin machine
such as seals, points, plugs, hoses or similar items. This warranty does not
extend to any machine or part replaced or repaired under this warranty. This
warranty does not cover any repair or replacement labor or any part of parts
found defective after examination by Mauldin or an Authorized Service
Representative. This warranty does not apply to defects caused by casualty or
unreasonable use, including faulty repairs by others and failure to provide
reasonable and necessary maintenance.

THIS WARRANTY SET FORTH HEREIN IS IN LIEU OF AND EXCLUDES ANY

AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, ARISING BY
OPERATION OF LAW OR OTHERWISE, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND CUSTOMER WAIVES ANY OBLIGATION OF
LIABILTY OF MAULDIN ARISING IN TORT OR STRICT LIABILITY IN TORT,
OR FOR LOSS OR USE, REVENUE OR PROFIT WITH RESPECT TO
MAULDIN MACHINE AND/OR PARTS FOR ANY LIABILTY OF CUSTOMER TO
ANY THIRD PARTY, OR FOR OTHER DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.

I have read and fully understand the warranty policy above.

Customer Witness
CALDER BROTHERS CORPORATION
 Calder Brothers Corporation
250 E Warehouse Ct.
Taylors SC, 29687

4amauldin.com 864-244-4800 Fax 864-244-5007