Scribd Logo
Upload

Welcome to Scribd!

  • 30 views

    Soal Kelistrikan

    Uploaded by

    Eka Prazetya
    Inverters are used to convert DC power to AC power. Transformers are used to step down AC voltages. Inverters and transformer rectifier units (TRUs) provide secondary power and convert power between AC and DC forms. A reverse current relay prevents a battery from feeding excess current back through a generator during shutdown, while a current limiter reduces output under fault conditions. TRUs power essential AC buses from DC sources.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Soal Kelistrikan

    Uploaded by

    Eka Prazetya
    30 views2 pages
    Inverters are used to convert DC power to AC power. Transformers are used to step down AC voltages. Inverters and transformer rectifier units (TRUs) provide secondary power and convert power between AC and DC forms. A reverse current relay prevents a battery from feeding excess current back through a generator during shutdown, while a current limiter reduces output under fault conditions. TRUs power essential AC buses from DC sources.

    Original Title

    soal kelistrikan

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Inverters are used to convert DC power to AC power. Transformers are used to step down AC voltages. Inverters and transformer rectifier units (TRUs) provide secondary power and convert power between AC and DC forms. A reverse current relay prevents a battery from feeding excess current back through a generator during shutdown, while a current limiter reduces output under fault conditions. TRUs power essential AC buses from DC sources.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    30 views2 pages

    Soal Kelistrikan

    Uploaded by

    Eka Prazetya
    Inverters are used to convert DC power to AC power. Transformers are used to step down AC voltages. Inverters and transformer rectifier units (TRUs) provide secondary power and convert power between AC and DC forms. A reverse current relay prevents a battery from feeding excess current back through a generator during shutdown, while a current limiter reduces output under fault conditions. TRUs power essential AC buses from DC sources.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 2

    1. Inverters are used to convert what forms of electrical power?

    power electronics device which used to convert DC voltage into AC voltage

    2. Stepping a power supply down from 115 to 26 V AC would normally be achieved by a:

    Transformer /tranformator

    3. Inverters and transformer rectifier units (TRU) are sources of:

    Are secondary sources of power

    4. TRUs are used to convert what forms of electrical power:

    To convert from alternating current to direct current.

    5. The reverse current relay is needed on any DC generation system to prevent the:

    the battery from feeding excess current back through to the generator's armature. Without this
    protection, the battery would discharge when the generator output voltage is less than battery terminal
    voltage, e.g. during engine shut down

    6. The current limiter device:

    reduces the output from a DC generator under fault conditions

    7. Battery charge/discharge current is monitored via which type of instrument?

    ammeter

    8. The main distribution bus is sometimes called the:

    non-essential bus.

    9. The split bus system is sometimes called a:

    non-parallel system

    10. Essential DC power could be supplied from a:

    transformer rectifier unit (TRU) powered from the essential AC bus

    11. The third pin on external DC power connectors is used to:

    energize the ground power relay.

    12. An aircraft cabin has 110 passenger reading lamps each rated at 10 W, 28 V. What is the maximum

    load current imposed by these lamps?


    13. The relationship between voltage, V , current, I , and resistance, R , for a resistor is:

    14. A potential difference of 7.5 V appears across a 15 Ohm resistor. Which one of the following gives
    the

    current fl owing:

    15. Which one of the following gives the symbol and abbreviated units for electric charge?

    16.

    The unknown current shown in Figure above will be:

    17. An AC waveform has a period of 4 ms. Which one of the following gives its frequency?

    18. The forward voltage drop of a conducting silicon diode is approximately:

    19. A three-phase induction motor has three pairs of poles and is operated from a 60 Hz supply. Which
    one

    of the following gives the motor’s synchronous speed?

    20.

    Referring to figure above, this device is a

    a. Explain the different functions of a reverse current relay and current limiter.

    b. If 0.4 J of energy is used to transfer 0.05 C of charge between two points what is the potential

    difference between the two points?

    c. Explain the applications of inverters and transformer rectifier units (TRUs)

    You might also like