Geotech1Lab-Research Work No. 1
Geotech1Lab-Research Work No. 1
Geotech1Lab-Research Work No. 1
Hot surfaces:
There are several ovens in the labs including bench ovens and microwave ovens. Interior surfaces of these
ovens and materials being removed from the ovens can burn unprotected skin.
Cutting devices:
Cutting and scraping devices such as hacksaws, utility knives, wire saws and soil scrapers are used in the lab.
Improper use can cause cuts and scrapes.
Chemical usage:
Chemical usage is limited in the lab, but some potentially hazardous chemicals are used including sodium
hexametaphosphate, isopropyl alcohol, and lubricants.
Ladder:
Some work in the lab requires use of a ladder. Improper usage could lead to falls.
Pinching Hazards:
Many test machines and tools have potential pinch points, including vice, sample ejector, and proctor molds.
Unsafe usage of these machines or tools can cause cuts, bruises or blisters on hands and fingers.
2. DIFFERENT RULES OR POLICIES THAT SHOULD BE OBSERVED WHILE PERFORMIMG
LABORATORY WORKS
No open toed shoes, sandals, or flip-flops may be worn in the lab at any time.
Students will work in groups of 2 or more in the lab at all times (exception: a single student is permitted in
the lab for the purposes of weighing samples or reading gauges so long as no equipment is operated).
All injuries, equipment damage, and hazardous conditions will be reported immediately to the instructor or
lab technician.
The lab will be kept clean and orderly at all times. Spilled soils, materials, or liquids will be cleaned up
immediately. At the end of each session the lab will be tidied up and the floors swept.
Machines must be turned off and locked unless specifically approved and directed by the instructor.
Before operating equipment, check your surroundings for any debris and/or individual that may harm you and
others around you.
Never attempt to repair machines yourself; shut off the machine and call the lab instructor or technician.
Approved ladders will be used to reach elevated locations; no climbing or standing on stools, chairs or
furniture. The top two steps of stepladder will not be used as a step.
Tools and equipment will be in keep in good condition and ready for use.
Aisles shall be kept clear at all time, including any debris on the ground and closing any open cabinet doors
and drawers.
Proper lifting techniques will be used when handling heavy items—keeping the back straight and lifting with
the legs.
Oven Mitts:
Must be keep near bench ovens and used when handling hot items in ovens.
Safety glasses:
Must be worn where there is a danger of flying particles.
Protective gloves:
Must be worn to guard against cuts and burns.
Hearing Protection:
May be worn when operating the sieve machine.
Dust Masks:
May be worn when working with dry soils that create dust.
4. THE 5S.
REFERENCES:
o Geotech Lab Safe Practices – Cal Poly Pomona. (n.d.). StuDocu. https://www.studocu.com/en-
us/document/california-state-polytechnic-university-pomona/geotechnical-engineering-
laboratory/coursework/geotech-lab-safe-practices/1665095/view
o Mettler-Toledo International Inc. all rights reserved. (2020, June 25). 5s Audit Checklist – Requirements to Sustain
a Lean Laboratory. https://www.mt.com/ph/en/home/library/guides/laboratory-weighing/5S-audit.html