Index Map

Project Site
Topomap of 10 km radius- Google map

N
Topomap of 5 km radius- Google map

N
Aerial view of the proposed project
N
B C

E
G

No Latitude Longitude
F A 13o 18’ 43.06” N 80o 08’ 14.70” E
B 13o 18’ 45.86” N 80o 08’ 20.63” E
C 13o 18’ 45.82” N 80o 08’ 24.81” E
D 13o 18’ 39.66” N 80o 08’ 31.77” E
E 13o 18’ 35.26” N 80o 08’ 31.63” E
F 13o 18’ 31.82” N 80o 08’ 13.06” E
G 13o 18’ 34.52” N 80o 08’ 09.95” E
Adjoining properties to the proposed site
 CLIENT :
M/s. SLO INDUSTRIES LIMITED

PROPOSAL SUBMITTED BY
M/s ECO CARE ENGINEERING SYSTEMS,
ALANDUR GUINDY, CHENNAI 60016
Phone: 044-22311125 / 044-45410487
Mail : [email protected]
PROJECT : 20 KLD PACKAGED SEWAGE TREATMENT PLANT

CLIENT : M/s. SLO INDUSTRIES LIMITED

PROPOSAL
:M/s. ECO CARE ENGINEERING SYSTEMS, CHENNAI
BY
DESIGN CRITERIA FOR SEWAGE TREATMENT PLANT

Treatment Plant Design Considerations

STP designed for : 20 KLD
No of Hours Operation : 16 hrs Except Air Blower
Pumping Rate : 1.25 m3/ hr ( say 1.5 m3/ hr )

Treated
Sl No Parameters Sewage Effluent
Effluent
1 Flow (Liters) 20 20
2 pH 7.0 - 7.5 7.0 - 7.5
3 TSS, mg/l 120 < 10
4 TDS, mg/l 1000 1000
5 BOD3 @ 27oC, mg/l 300 20
6 COD , mg/l 700 200
7 Oil and Grease, mg/l 10 - 20 <5

1. Bar Screen: Bar Screen is proposed to install barscreen chamber before the collection
tank to remove the floating materials etc.

2. Collection / Equalization tank : Equalization of effluents is essential to make a

uniform mixture for further treatment. Air grid is providede in the collection tank for
equalization and to avoid septic.

3. Aeration System is Biological treatment process where Oxygen from air is transferred
to the liquid with the help of Air Grid or Diffusers in the Aeration Tank.

4. Settling Chamber: After Aeration in the aeration tank, the effluent will be sent to
settling, Where solid liquid seperation is taken place in the Settling Chamber. The Settling
Chamber is provided with Feed well assembely. The Bottom portion is with sufficient
slope to ensure accumulation of suspended solids. There are no moving parts in this
section.
5. Sludge Handling: A Sludge pump is provided to periodically remove the Solids
accumulated at the bottom of Settler Chamber. The Sludge is pumped to Sludge Drying
beds. The dried sludge will be reused as manure by mixig wih fertilizer for Landscaping /
Gardening .

6. Tertiary Treatment ( Filtration Unit ). The water from the settling chamber is collected
in the filter feed collection tank and passed through sand and carbon filters in series. The
first filter has a specific combination of medias like Gravels, Pebbles, Filtration Sand to
ensure proper filtration.
7. Chlorination : The System is provided with chlorination for effective disinfection.
 SEWAGE TREATMENT TREATMENT PLANT - BILL OF QUANTITIES

Item Qty Unit

I Sewage Treatment Plant Equipment

a BAR SCREEN
MOC : MS Epoxy Coated
Type :Manual with handle for lifting
Size of the screen : 1.0 m x 0.6 m depth
Size of Bar : 10mmx6mm with 25mmx6mm outer frame
Spacing between the bar : 10 mm c/c
Acessories : cleaning tools and tackles etc. 1 No
b RAW SEWAGE TRANSFER PUMPS
Type : Horizontal, Cenrifugal type, Non clog pump fitted with
horizontal foot mounted motor
Material of Construction : Cast Iron
Capacity : 1.5 m3 / hr
Acessories : Baseplates, coupling, Cou-pling gaurds ,pipe
nipples, fasteners , gaskets, sutaible foundations, vibration
ellimination pads and all other necessary acessories etc.
Make : Kriloskar or approved equivalent 2 Nos
c SLUDGE RECIRCULATION PUMPS
Type : Horizontal, Cenrifugal type, Non clog pump fitted with
horizontal foot mounted motor
Material of Construction : Cast Iron
Capacity : 0.5 m3 / hr
Acessories : Baseplates, coupling, Cou-pling gaurds ,pipe
nipples, fasteners , gaskets, sutaible foundations, vibration
ellimination pads and all other necessary acessories etc.
Make : Kriloskar or approved equivalent 1 No
d FILTER FEED PUMPS
Type : Horizontal , mono bloc pump fitted with motor
Material of Construction : Cast Iron
Capacity : 1.5 m3 / hr @ 25m Head
Acessories : Baseplates, pipe nipples, fasteners , gaskets,
vibration ellimination pads and all other necessary acessories
etc.
Make : Kriloskar or approved equivalent 2 Nos
e AIR BLOWER & MOTOR
Air Blower
Type : Twin Lobe compressor consist of Helical Gear drive
 system
Capacity : 65 m3/hr
Pressure : 0.4 kg/cm2
MOC : Cast Iron
Drive : Belt driven type,
Acessories : Base frames, Air filter for Suctin line and silencer
for dischargeline, Safety guard for belt drive ,sutaible RCC
foundations, vibration ellimination pads and all other necessary
acessories etc.
Make of Air Blower : Kay or approved equivalent
MOTOR
Type ; Horizontal Foot Mounted motor
RPM : 1440
Make : Kriloskar or approved equivalent 2 Set
f DIFFUSERS
Make : Bokay / Enviro Quip or approved equivalent
Material of Construction : EPDM Membrane
Type : Coarse Bubble Diffusesr
Connection : 3/4 " ( Female thread )
Diameter : 8mm
Height : 40mm
Air Flow : 0.08 - 0.10 m3/min.
Type : Fine Bubble Diffusesr
Size : 2.5 " dia x 24 " Long
Support : PVC
Air Flow :4m3/Hr 1 Lot
g PRESSURE SAND FILTER
Type : FRP fabricated Cylndrical pressure vessel with dish end
with Multiport valves and acessories .
Distribution system : Multiport Valve.
Design Pressure : 5.0 Kg / cm2
Working Pressure : 2.5 - 3 Kg / cm2
MOC : FRP
Service Flow Rate : 1.5 m3 /hr
Filter media :Graded Sand, Pebbles of Various sizes, Filter
media Size: BOTTOM portion(Pebbles) : (i) 11/2" x 1" (ii) 3/4" x
1/2" (iii) 1/2" x 3/8" ; MIDDLE portion:(i) Coarse silex: 3/8 'x 1/4"
(ii) Fine silex: 1/4" x 1/10"; TOP portion: 16/32 Filter sand
 Accessories : Multi port valves and Two no of Pressure
gauges( 0- 3 kg/cm2) to monitor the pressure drop through the 1 Set
filter.back washing arrangement ,sutaible base foundation
h ACTIVATED CARBON FILTER
Type : FRP fabricated Cylndrical pressure vessel with dish end
with Multiport valves and acessories .
Distribution system : Multiport Valve
Design Pressure : 5.0 Kg / cm2
Working Pressure : 2.5 - 3 Kg / cm2
MOC : FRP
Service Flow Rate : 1.5 m3 /hr
Filter media :Graded Sand, Pebbles of Various sizes, Activated
Carbon of Filter media Size: BOTTOM portion(Pebbles) : (i)
11/2" x 1" (ii) 3/4" x 1/2" (iii) 1/2" x 3/8" ; MIDDLE portion:(i)
Coarse silex: 3/8 'x 1/4" (ii) Fine silex: 1/4" x 1/10"; TOP
portion: 16/32 Filter sand and activated carbon.

Accessories : Multi port valves and Two no of Pressure gauges

( 0- 5 kg/cm2) to monitor the pressure drop through the 1 Set
filter.back washing arrangement ,sutaible base foundation
i DOSING SYSTEM
Hypo Chlorite
Dosing Tank: 50 lts PP tank 1 Nos
Dosing Pump: 0-3 lts/hr 1 Nos
MS TANKS FOR AERATION ,SETTLING & CLARIFIED
j
WATER TANKS
MS Fabricated tanks lined with FRP internally and coated with
externally with two coats of Epoxy Paint with required ladders 1 Lot
and hand rails with required nozzeles and accessories
Size of the MS tanks
Aeration Tank : 2.0 x 2.0 x 2.5 m ( TD )
Settling Tank : 2.0 x 1.0 x 2.5m ( TD )
Filter Feed Tank : 2.0 x 1.0 x 2.5m ( TD )
k AIR GRID
MS fabricated air distribution grid with required piping material
and SS ball valve with PP hose and clips to connect air from
header to diffusers. 1 Lot
l FEED WELL ASSEMBLY
Feed well assembly to be provided for settling tank to reduce
the
 inlet velocity from Aeration tank to Settling tank.
Manufactured in FRP with required supporting angles, etc.
Size: 0.4m dia X 1.0m HOS 1 Set
II INTER CONNECTING PIPING
Supply of PP Diaphragm Valve, PP Non Return Valve, CI
Butterfly Valve, SS Ball valve, fixing to pipe work with required
fixing materials, testing etc. complete.
Make: PP valves: Parshit/Equivalent
CI valves: Flow Way/Equivalent
Supply of UPVC pipe 10 kg/cm2 class pipe of required dia
conforming to IS including pipe specials like bend to required
degree, elbow, tee, union, Cutting the pipes to requirement,
making joints with pipe specials ,Making earth work in
excavation, refilling, supports , Conducting hydraulic test to a
pressure of 6Kg/cm2, rectifying the leaks if any in laid pipe
work, etc, complete.
Make: Finolex/Equivalent
Supply of UPVC Flexible hoses of required dia to inter connect
the Diffusers & MS Pipe line including all necessary acessories
etc. as required complete in all respect.
III ELECTRICAL WORKS
Control Panel : Non compartmental type with weather proof
DOL Startes consisting of incoming feeder with outgoing feeder
feeders,Voltmeters, Ammeter,push button with indicator 1 Set
lamp,overload relays,Contactors,Bus bar of required size,
control cablings etc.
Type of pannel : Non compartment type
MOC : MS ( 1.6mm thick sheet )fabricated with powder coating
cable entry : bottom
Cables: IS standard Copperarmoured cables
Make ; PolyCab/ Omega / Finolex / Equivalent
Size : 3 Core x 2.5 Sq mm, 3 Core x 1.5 sq.mm
Eathings
Consist of Copper flats 25 x 3 mm Size 8 SWG copperwire
for earthing motors ,MCC Etc.
Required compression glands ,ferrules,ties, aluminium etc 1 Lot
IV CONSTRUCTION OF CIVIL WORKS ( Clients Scope of work )

S.NO DESCRIPTION NOS SIZE

BARSCREEN CHAMBER
Required
prior to the
Base slab and side wall shall be of RCC 1:11/2:3 mix.
collection
1 tank.
1
Note : Free bopard and Total Depth will vary with respect AS
to the invert level of the collection tank . REQUIRED

SEWAGE COLLECTION TANK

Base slab and side wall shall be of RCC 1:11/2:3 mix. AS

2 1
REQUIRED
Note : Free bopard and Total Depth will vary with respect
to the invert level of the collection tank .

TREATED WATER TANK

AS
3
Base slab and side wall shall be of RCC 1:11/2:3 mix. 1 REQUIRED

AS
4 EQUIPMENT FOUNDATIONS
REQUIRED
AS
5 SLUDGE DRYING BEDS 2
REQUIRED

SCOPE OF WORKS

SCOPE OF ECES

• All Mechanical , Interconnecting Piping and Electrical works as given in

our BOQ
• Treated sewage shall be terminated at 3m from the plant area
• Scope of Work as given in previous pages
• Design of civil tanks - structures and preparation of RCC structural
drawings
SCOPE OF CLIENT
• All civil works including grading / leveling of site foundations, building
drains, pipe and underground cable trenches, grouting, platforms and
staircase for equipment pipe supports, inserts, puddle pipes, structural
supports for air grids & pipes.
• Safe storage of equipment at site till handing over the plant .
• Construction roads inside the plant and approach roads.
• Construction of fencing of the plant.
• Utilities e.g. Water , Electricity etc.
• Plant and area illumination.
• Emergency power supply and illumination system.
• All piping, cabling etc. beyond the termination points as mentioned in our
offer.
• Fire fighting system including appliances.
• Lightening protection.
• Operation & Maintenance of the plant.
• Commissioning consumables, chemicals, lubricants etc After
Initial filling
• NOC/Approval from Statutory Bodies.
• Any other item not specifically mentioned in our scope.
Terms of Payment
1. 40 % adavancce along with Order
2. 50 % against supply of material at site
3. 10% after Erection & Commissioning of the plant.

Completion Schedule
1. Contract period :- 4 - 6 weeks from the date of purchase order

Gaurantees for the Equipments

Gaurantee for the Equipments will be 1 year from the date of supply which we
getting from our suppliers. If any civil works delay the gaurantees for boughtout
items canot be extended..
 SUMMARY PRICE FOR SEWAGE TREATMENT PLANT

The Price of SEWAGE TREATMENT SYSTEM of 20 m3/day capacity with all

treatment as described below

S No DESCRIPTION TOTAL
VALUE (RS )

1 Supply of Mechanical Equipments 900,000

2 Supply of Piping Works 45,000

3 Supply of Electrical Works 55,000

4 Erection and commissioning of the Plant 40,000

TOTAL AMOUNT
(Rupees Ten Lakhs and Forty Thousands Only ) 1,040,000

Tax : 12% & 18% GST Extra as applicable

Note:
Civil construction cost is to be estimated by the client / Builder.

Frieght
Extra as actuals.

For Eco Care Engineering Systems

C.Palani Pandian
CEO
 DISCLOSURE OF CONSULTANT

Introduction

VIMTA Labs Limited is a leading multi-disciplinary testing and research

laboratory in India. VIMTA provides contract research and testing services in the
areas of clinical research, pre-clinical (animal) studies, clinical reference lab
services, environmental assessments and analytical testing of a wide variety of
products.

VIMTA - Environment Division has been in the forefront of its vision to provide
better environment through guiding and assisting the industry for sustainable
development. A stalwart in the mission to protect and preserve the natural
resources on earth for future generations, Vimta offers extensive research and
consultancy services in the field of Environment. With its rich experience, multi-
disciplinary expertise and with the support of its state-of the-art analytical
equipment, the services offered by Vimta are wide ranging and encompasses
entire gamut of Environment Management and Monitoring Services. With its
emphasis on quality services, Vimta, over the years, has evolved itself into a
single reference point in India for Comprehensive Environmental Services.

The Quality Policy

 VIMTA is committed to good professional practices and quality of operations in

its testing, validation and research services.
 VIMTA shall ensure customer satisfaction by maintaining independence,
impartiality and integrity in its operations.
 VIMTA shall provide the services in accordance with national and international
norms.
 VIMTA shall implement quality system as per ISO/IEC 17025 and applicable
GLPs & GCPs, to generate technically valid results/data.
 VIMTA shall ensure that all its personnel familiarize with the policies and
procedures of the quality system and implement the same in their work.

Milestones and Accreditations

 1984 - Registered with an initial investment of Rs.2 Lakhs.

 1985 - Recognized by ISI (now known as Bureau of Indian Standards).
 1987 - Qualified by the criteria of Ministry of Environment and Forests was
notified as one of the 14 standard Environmental Laboratories published in the
Gazettee of India.
 1988 - Licensed for carrying out tests on Drugs and Pharmaceuticals.
 1990 - Cherlapally land purchased with plans of larger, more comprehensive
facility.
 1991 - Accredited by NCTCF, DST, Government of India (the forerunner of
NABL).
 1992 - Laboratories shifted to new facility at Cherlapally.
 1993 - State-of-the-art equipment worth Rs.60 million procured.
 1995 - Accredited by NABL under its revised scheme, certified by Standards
Australia, Quality Assurance Services as per ISO/IEC Guide 25 and ISO 9002.
 1996 - GLP Compliance.
 1997 - Restructuring of Vimta from 165 to 100 associates with same
performance.

VIMTA Labs Limited, Hyderabad/Coimbatore

  1998 - Accreditation by GOSSTANDART and joint venture for certification of
Food Exports with ROSTEST, Russia.
 2001 - World Bank Recognition.
 2002 - ANVISA Brazil certification.
 2003 - USFDA accepts Vimta Bioequivalence study report. Showcased Vimta
at AAPS (USA) and ICSE-CPHI (Germany).
 2003 - Vimta VHS Research Center inaugurated at Chennai, Launched district
laboratories at Visakhapatnam and Vijayawada, Patient service centers
launched at 160 locations across the country.
 2003 – Vimta Labs Recognized by Saudi Arabian Standards Organization.
 2004 - Vimta increases people strength from 225 in 2003 to 400 in 2004.
Vimta achieves export turnover of $ 2.5 million.
 2004 - Vimta releases its first fortnightly medical newsletter “Vaidyalekha”,
Vimta enters Gulf market - bags a contract for Environmental Consultancy in
Kuwait.
 2004 - Vimta acquires 10.7 acres of land in S.P.Biotech Park – Genome
Valley, Hyderabad, to create a world class Research Laboratory of 1,50,000
sq.ft by July 2005.
 2004 – Vimta starts a new state of the art speciality services in Molecular
Diagnostics at TICEL Bio-Tech Park” at Chennai.
 2006 – Vimta expands its overseas activities. Undertakes environmental
assignments in Saudi Arabia and Tanzania
 2008 – Vimta has been Pre-Qualified by World Health Organization (WHO).
 2009–Undertaken Comprehensive Environmental Impact Assessment in
Cameroon, Africa
 2010 – Accredited by QCI/NABET, Government of India for EIA report
preparation
 2011- Undertaking environmental and social impact assessment study in
Tanzania, Africa as per IFC-World Bank Guidelines

Management and Board of Directors

1. Dr. S.P. Vasireddi Chairman and Managing Director

2. Mr. V. Harriman Director – Technical
3. Mr. V.V. Prasad Executive Director
4. Mrs. Harita Vasireddi Director Projects
5. Mr. S. Subrahmanyam Director
6. Mr. T.S. Ajai Director
7. Dr. Pavuluri Subba Rao Director

Services Offered

Spread over the 70,000 Sq.ft lush green garden premises at Cherlapally,
Hyderabad (India), the scientifically designed and meticulously groomed
infrastructural facility of the Central Laboratory of VIMTA has the most
sophisticated instruments backed by an excellent team of professionals. The
40,000 Sq.ft, three-storied, 120 roomed, centrally air conditioned state-of-the-art
Laboratory equipped with Rs.100 million worth analytical instruments and
computerized data management systems, all under one roof is perhaps the only
one of its kind in South Asia in the contract testing and research sector.
Vimta offers various services under the following divisions:

VIMTA Labs Limited, Hyderabad/Coimbatore

  Environment;
 Analytical;
 Clinical Reference Lab; and
 Clinical Research.

The environment division of VIMTA Labs Limited (Vimta) has its presence all over
India including a strong association with international consultants like Japan Bank
for International Cooperation (JBIC), Kennametal Inc. - USA, BBL - UK, Rudal
Blanchard – UK, E&E Solutions – Japan, NEPESCO & KNPC – Kuwait, Marafiq –
Saudi Arabia and others. Vimta has the following credentials:

 Recognitions by BIS;
 Recognitions by Ministry of Environment and Forests, Govt. of India;
 Recognitions by State Pollution Control Boards (wherever applicable) ;
 Recognitions by Department of Science & Technology, Govt. of India (NABL) ;
 Recognitions by Ministry of Defense, Govt. of India;
 Recognitions by APEDA, Ministry of Commerce, Govt. of India;
 Recognitions by Saudi Arabia Standard Organization (SASO), Saudi Arabia;
 Recognitions from NEMC, Tanzania;
 Accreditations by NCTCF;
 Certification from Standard Australia;
 Recognition from ANVISA Brazil;
 Quality Assurance Services as per ISO/IEC 17025; and
 Quality Assurance Services as per ICH Guidelines

Services

Environment essentially being a multi-disciplinary science, the range of services

offered by the Division are also comprehensive and caters to the needs of
industry, pollution control agencies, regulatory authorities and in a larger pursuit
of a green globe. The services under Environmental Assessments include:

 Site Selection and Liability Studies;

 Environmental Impact Assessments;
 Environment Management Plans;
 Carrying Capacity based Regional Studies;
 Environmental Audits;
 Solid and Hazardous Waste Management;
 Risk Assessment (MCA,HAZON,HAZOP) & DMP;
 Occupational Health and Safety, Industrial Hygiene;
 Environmental Monitoring for Air, Meteorology, Water, Soil, Noise, Ecology
and Socio-Economic;
 Industrial Emission Source Monitoring;
 Offshore Sampling and Analysis of Marine Water and Sediments;
 Marine Ecological Studies;
 Marine Impact Assessment;
 Rehabilitation and Resettlement Studies;
 Forestry and Ecological Studies;
 Geological and Hydro-geological Studies;
 Land Use /Land Cover Studies based on Remote Sensing;
 Socio-Economic Studies;
 Due Diligence Studies;
 Epidemiological Studies;
 Wasteland Management Studies; and
 Study on Bio-indicators.
The services under Environmental Chemistry include:

VIMTA Labs Limited, Hyderabad/Coimbatore

  Analysis of Water, Wastewater, Soil, Solid Waste, Hazardous waste as per
Indian and International Codes;
 Source Emissions and Work Zone Air/Noise quality monitoring;
 Analysis of SVOCs, VOCs, PAH, BTEX, AOX, PCB’s, TCLP metals, TOC etc.;
 Categorization of Hazardous Waste; and
 Pesticide Residue Analysis.

Facilities

Vimta-Environment Division is located in scientifically designed Central Laboratory

with the state-of the-art modern facilities to offer vide range of services in indoor
and outdoor monitoring and analytical characterization in the field of
Environment. Further, it is ably supported by highly skilled and experienced team
of professionals in the fields of Science, Engineering, Ecology, Meteorology, Social
Planning, Geo & Hydro-geology, and Environmental Planning.

Besides the regular monitoring equipment such as Respirable Dust Samplers,

Automatic Weather Monitoring Stations, Stack Monitoring Kits, Personal
Samplers, Noise Meters, Portable Water Kits etc, the other major specialized
equipment include:

 Monostatic Sodar–Designed by National Physical Laboratory, GOI;

 Integrated Noise Level Meter–Quest, U.S.A;
 Flue Gas Analyzers–Testo, Germany;
 113-A Gravimetric Dust Sampler-Casella, London;
 ICP AES– Varian, USA;
 Gas Liquid Chromatographs with FID, ECD & pFPD–Varian, USA;
 Gas Chromatograph with Mass Detector–Varian, USA;
 Atomic Absorption Spectrometer [AAS]–Varian, USA;
 PAS-AFC-123 instrument;
 High Performance Liquid Chromatograph;
 Laser Particle Size Analyzer;

 Monostatic Sodar – Designed by National Physical Laboratory, GOI;

 Integrated Noise Level Meter–Quest, U.S.A;
 Flue Gas Analyzers–Testo, Germany;
 113-A Gravimetric Dust Sampler-Casella, London;
 ICP AES– Varian, USA;
 Gas Liquid Chromatographs with FID, ECD & pFPD–Varian, USA;
 Gas Chromatograph with Mass Detector–Varian, USA;
 Atomic Absorption Spectrometer [AAS]–Varian, USA;

 Quality Systems

The fact that Environment division and its supporting Site Laboratories are
accredited by NABL (IS0-17025) and Ministry of Environment and Forests and by
other international bodies such as Asian Development Bank (ADB) and World
Bank stands testimony to its emphasis on Quality Systems.

 Achievements

VIMTA Labs Limited, Hyderabad/Coimbatore

 Being the first laboratory to be recognized under Environment Protection (EP) Act
by GOI in 1986, Environment Division with its best mind power and industrial
knowledge competency that allows it to compare with the best in the business.

 The Environment Division till date has executed about 350 Environmental
Impact Assessment (EIA) and Environment Management Studies with Risk
Assessment and Disaster Management Plans and obtained statutory
approvals.
 Supported by the strong modern laboratory support and experienced hands,
Environment division is well equipped in conducting Due Diligence, Phase-I
and Phase-II studies.
 Undertaken specialized studies such as Regional Environmental Impact
Assessment on Carrying Capacity Principle; Upper Air Meteorological studies
using SODAR for major Industrial Complexes.
 Associated with prestigious studies such as Environmental Pollution
monitoring around Taj Trapezium, Pre and Post Satellite launch studies for
SHAR, ISRO and monitoring for offshore Oil & Gas exploration for deep-sea
water and sediment sampling.
 The services offered include vide spectrum of industries covering Power,
Chemical, Cement, Mining, Steel & Alloys, Metallurgical, Dye & Intermediates,
Bulk Drugs, Pesticides, Agro-Chemicals, Petro-Chemicals, Refineries, Pulp &
Paper, Oil & Gas Exploration & Production, Asbestos, Infrastructure, River
valley, Foundries etc.
 The Environment division has also offered its services to major infrastructure
projects such as Ports, Oil & Gas Pipelines, Green field Air Ports, Roads and
Highways.

VIMTA Labs Limited, Hyderabad/Coimbatore

 DETAILS OF PERSONNEL INVOLVED IN CURRENT EIA/EMP REPORT

Sr. No. Name Qualification Position Experience

1 Mr. M. Janardhan M.Tech (Env) Head & Vice About 24 years of experience in the field of air quality impacts, and noise,
President(Env) environmental management and environmental engineering
2 Dr. K.S. Muneeswaran M.E. (Env. Engg).,(Ph.D) Senior Manager/Senior About 26 years of experience in the field of environmental chemistry and
Scientist environmental impact assessment
3 Dr. B. Chandra Sekhar M.Sc, Ph.D Sr. Manager About 14 years of experience in the field of environmental management and
modelling
3 Mr. G.V. Raghava Rao M.Tech (Env) Group Leader About 17 years of experience in the field of Environmental Engineering &
Management
4 Ms. Durga Bhavani M.Tech (Env) Group leader About 13 years of experience in the field of environmental impact assessment
5 Mr. P.Niranjan Babu B.Com Asst Manager About 23 years of experience in the field of Environmental Monitoring and secretarial
assistance
6 Dr. Subba Reddy M.Sc., Ph.D Scientist About 8 years of experience in the field of Environmental Impact Assessment
studies
7 Mr. Rajashekhar M.Sc., Ph.D Ecologist About 10 year of experience in the field of environmental monitoring and
environmental impact assessment
8 Mr. S. Srinivas Goud M.S.W Group Leader About 14 year of experience in the field of social impact assessment
9 Mr. J. Bharatvaj M.E., (Env. Engg) Env. Engineer About 3 year of experience in the field of environmental monitoring and
environmental impact assessment
10 Dr. Subba Reddy M.Sc., Ph.D Scientist About 8 years of experience in the field of Environmental Impact Assessment
studies
11 Mr. G. Krishnamoorthy M.Sc., (Env. Sci) Scientist About 5 years of experience in the field of Environmental Science and monitoring
12 Mr. A. Ashok B.Tech (Biotechnology) Jr. Env. Engineer About 4 year of experience in the field of Environmental Science and monitoring
13 Mr. Ganesan B.Tech (Env.Enginer) Jr. Env. Engineer About 2 year of experience in the field of Environmental Science and monitoring
14 Mr. P. Krishna I.T.I (Civil) Sr. Draftsman About 14 years of experience in the field of Environmental and Civil Drawings
15 Mr. J. Ramakrishna I.T.I (Civil) Sr. Draftsman About 13 years of experience in the field of Environmental and Civil Drawings
Empaneled Experts
1 Mr. J. Rajendra Prasad M.Sc Consultant About 13 years of experience in the field of Remote sensing, Hydrogeology
2 Mr. J. Rajgopal Krishnan M.Tech (Chem. Engg) Consultant About 40 years of experience in the field of risk and hazard assessment

VIMTA Labs Limited, Hyderabad/Coimbatore