Catalogue Small Equipment - ENG - 2018

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

PUPILLOMETER

The corneal reflection pupillometer for precise and


digital PD measurements

 Measuring of the monocular and binocular PD for all


distances between 35 cm & infinity.
 Monocular PDs can be measured by occluding one eye if
the patient’s binocular vision is abnormal.
 Digital display of monocular and binocular PDs from 48 to
7mm (step: 0.5mm).
 Automatic standby.

 Dimensions: L250 x P160 x H60 mm.


 Weight: 0.7 kg.
 Powered by two 1.5 V batteries

Reference : X81705

MHP

Ideal instrument for precise and speedy


reading of the fitting heights for multifocal.

 Easy to install on the frame.


 Graduated face designed to adapt to all frame
types.
 Delivered with its presentation box.

 Dimensions: L198 x w18 H75 mm


 Weight :30 g.

Reference : MHP100

AVAILABLE ACCESSORIES

 RETROFIT KIT Ref : MHPS50

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937
DITEST

The Ditest allows the minimum lens diameter to be


determined during initial dispensing, and final
checking after glazing.

 Delivered with cards covering most Essilor lens types.

 Dimensions: L250 x W150 x H35 mm.


 Weight: 0.5 kg.

Reference : N73700

PAL-ID

Lens engraving detector PAL ID makes it


much easier to read lens engravings.
Instant lens engravings identification
whatever the material.
 Easy lens engraving identification whatever the
type: organic, polycarbonate, mineral.
 In the workshop, it is easier to find FV and NV
tests points.
 In the ECP the dispensary can check the
manufacturer’s mark.
 Delivered with 2 filters:
- one for organic and polycarbonate lenses;
- one for mineral lenses.

 Dimensions: L145 X W260 X H320 mm.


 Weight: 2.0 kg.
 Voltage: 110 V - 60 Hz.

Reference : PAL000

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937
MLM 150 - MANUAL LENSMETER

Reference : MLM150E

ALM 500 - AUTOLENSMETER

Reference : ALM500

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937
ALM 700 -AUTOLENSMETER

Reference : ALM700

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937
TENSISCOPE

The tensiscope makes it


possible to identify
tension or stress on
mounted lenses.
 If wrongly applied, such
stress can cause
distortion and, in glass
lenses, chips.

 Tension is always present


when, mounting a lens,
any excessive tensioning
shown by the tensiscope
must be eliminated.

Reference : TEN070

Reference : TEN100

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937
FRAME HEATER

Frame heater with electronic heating


regulation for easy frame adjustments.
Large Platform, Electronic heating
regulation, cooling function

 Two levels of temperature : 65/90°C and


130/170°C.
 Cooling function.
 Large platform allowing perfect frame heat
position.
 Homogeneous temperature in the working
area.
 Delivered with hot air concentrator.

 Dimensions: L15 x W190 x H215 mm.


 Weight: 2.6 kg.
 Voltage: 110-60HZ and115 V- 60 Hz.

Reference : FHE310

DIAFINE

A range of manual edgers for chamfering and


polishing.
 Conical diamond wheels from 50 to 90 mm in diameter. Diafine N65802
 Two 14 mm wide strips for chamfering and counter- Chamfering for
beveling at the best possible angle. mineral and
 Retouching mini bevels with either the left hand or the organic lenses.
right hand side of the wheel.
 Extra possibility: mini-beveling on thin lens (as sunglass
lens).
 Continuously lubricated by a film of water which
eliminates any risk ofsplashing. Diafine N65806:
 Built-in container. Chamefering and
 Dimensions: W160 x D250 x H170 mm. Weight: 4.6 kg. polishing for
 Voltage: 110 V-60 Hz polycarbonate and
organic bevelled
References : Plastic/Poly : N65806 lenses.
And Organic/Plastic : N65802

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937
SPHEROMETER

 150 gr
 135 x 85 mm

Reference : SPH001

THICKNESS GAUGE

Thickness gauge

 Aperture from 0 to 20 mm
 Arm depth 80mm and precision 0.5 mm
 374 gr
 180x110x35 mm

Reference : GAM010

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937
NAUTILUS AND OTHER

Reference : Nautilus
Nautilus licence renewal
Reference : NautilusL1

OTHER :

Reference : VISOFT3 - Visioffice Software License 3yrs

Reference : NVBCON – Connected NVB License

Reference : NVBSA – Standalone NVB License

Essilor Instruments e-mail: [email protected]


Phone: 1-888-337-1429 ext 1 Fax: 1-800-268-6937

You might also like