New Texts
New Texts
New Texts
2020-21
• Take out approximately 10 mL of this 1.2.2 P ARTICLES OF MATTER ARE
solution and put it into 90 mL of clear
water. CONTINUOUSLY MOVING
• Take out 10 mL of this solution and
put it into another 90 mL of clear water.
• Keep diluting the solution like this 5 to Activity ______________ 1.3
8 times.
• Is the water still coloured ? • Put an unlit incense stick in a corner
of your class. How close do you have to
go near it so as to get its smell?
• Now light the incense stick. What
happens? Do you get the smell sitting
at a distance?
• Record your observations.
2 SCIENCE
2020-21
Particles of matter are continuously • If we consider each student as a
moving, that is, they possess what we call particle of matter, then in which group
the kinetic energy. As the temperature rises, the particles held each other with the
maximum force?
particles move faster. So, we can say that with
increase in temperature the kinetic energy of
the particles also increases. Activity ______________ 1.7
In the above three activities we observe
• Take an iron nail, a piece of chalk and
that particles of matter intermix on their own a rubber band.
with each other. They do so by getting into • Try breaking them by hammering,
the spaces between the particles. This cutting or stretching.
intermixing of particles of two different types • In which of the above three
of matter on their own is called diffusion. We substances do you think the particles
also observe that on heating, diffusion are held together with greater force?
becomes faster. Why does this happen?
Activity ______________ 1.8
1.2.3 P ARTICLES OF MATTER ATTRACT
• Take some water in a container, try
EACH OTHER cutting the surface of water with your
fingers.
Activity ______________ 1.6 • Were you able to cut the surface of
water?
• Play this game in the field— make four • What could be the reason behind the
groups and form human chains as surface of water remaining together?
suggested:
• The first group should hold each The above three activities (1.6, 1.7 and 1.8)
other from the back and lock arms suggest that particles of matter have force
like Idu-Mishmi dancers (Fig. 1.3). acting between them. This force keeps the
particles together. The strength of this force of
attraction varies from one kind of matter to
another.
Q
uestions
1. Which of the following are
matter?
Chair, air, love, smell, hate,
almonds, thought, cold, lemon
water, smell of perfume.
2. Give reasons for the following
Fig. 1.3
observation:
• The second group should hold hands The smell of hot sizzling food
to form a human chain. reaches you several metres
• The third group should form a chain away, but to get the smell from
by touching each other with only their cold food you have to go close.
finger tips. 3. A diver is able to cut through
• Now, the fourth group of students water in a swimming pool. Which
should run around and try to break the property of matter does this
three human chains one by one into
observation show?
as many small groups as possible.
• Which group was the easiest to break? 4. What are the characteristics of
Why? the particles of matter?
2020-21
1.3 States of Matter the force is removed. If excessive force is
applied, it breaks.
Observe different types of matter around you. • The shape of each individual sugar or
What are its different states? We can see that salt crystal remains fixed, whether we
matter around us exists in three different take it in our hand, put it in a plate or in
states– solid, liquid and gas. These states of a jar.
matter arise due to the variation in the • A sponge has minute holes, in which
characteristics of the particles of matter. air is trapped, when we press it, the air
Now, let us study about the properties of is expelled out and we are able to
these three states of matter in detail. compress it.
4 SCIENCE
2020-21
higher than that of solids. This is due to the We have observed that gases are highly
fact that in the liquid state, particles move compressible as compared to solids and
freely and have greater space between each liquids. The liquefied petroleum gas (LPG)
other as compared to particles in the solid cylinder that we get in our home for cooking
state. or the oxygen supplied to hospitals in
cylinders is compressed gas. Compressed
1.3.3 THE GASEOUS STATE natural gas (CNG) is used as fuel these days
in vehicles. Due to its high compressibility,
Have you ever observed a balloon seller filling large volumes of a gas can be compressed
a large number of balloons from a single into a small cylinder and transported easily.
cylinder of gas? Enquire from him how many We come to know of what is being cooked
balloons is he able to fill from one cylinder. in the kitchen without even entering there,
Ask him which gas does he have in the cylinder. by the smell that reaches our nostrils. How
does this smell reach us? The particles of the
Activity _____________ 1.11 aroma of food mix with the particles of air
spread from the kitchen, reach us and even
• Take three 100 mL syringes and close
farther away. The smell of hot cooked food
their nozzles by rubber corks, as
shown in Fig.1.4.
reaches us in seconds; compare this with the
• Remove the pistons from all the rate of diffusion of solids and liquids. Due to
syringes. high speed of particles and large space
• Leaving one syringe untouched, fill between them, gases show the property of
water in the second and pieces of chalk diffusing very fast into other gases.
in the third. In the gaseous state, the particles move
• Insert the pistons back into the about randomly at high speed. Due to this
syringes. You may apply some vaseline random movement, the particles hit each
on the pistons before inserting them other and also the walls of the container. The
into the syringes for their smooth
pressure exerted by the gas is because of this
movement.
force exerted by gas particles per unit area
• Now, try to compress the content by
pushing the piston in each syringe. on the walls of the container.
Fig. 1.4
• What do you observe? In which case Fig.1.5: a, b and c show the magnified schematic
was the piston easily pushed in? pictures of the three states of matter. The
• What do you infer from your motion of the particles can be seen and
observations? compared in the three states of matter.
2020-21
uestions 1.4.1 EFFECT OF CHANGE OF TEMPERATURE
of matter.
(b) Comment upon the following:
rigidity, compressibility,
fluidity, filling a gas
container, shape, kinetic
energy and density.
3. Give reasons
(a) A gas fills completely the
vessel in which it is kept.
(b) A gas exerts pressure on the
walls of the container.
(c) A wooden table should be
called a solid.
(d) We can easily move our hand
(a)
in air but to do the same
through a solid block of wood
we need a karate expert.
4. Liquids generally have lower
density as compared to solids.
But you must have observed that
ice floats on water. Find out why.
6 SCIENCE
2020-21
• Start heating the beaker on a low flame. state by overcoming the forces of attraction
• Note the temperature when the ice between the particles. As this heat energy is
starts melting. absorbed by ice without showing any rise in
• Note the temperature when all the ice temperature, it is considered that it gets
has converted into water. hidden into the contents of the beaker and is
• Record your observations for this known as the latent heat. The word latent
conversion of solid to liquid state. means hidden. The amount of heat energy
• Now, put a glass rod in the beaker and that is required to change 1 kg of a solid into
heat while stirring till the water starts
liquid at atmospheric pressure at its melting
boiling.
point is known as the latent heat of fusion.
• Keep a careful eye on the thermometer
So, particles in water at 00 C (273 K) have
reading till most of the water has
vaporised.
more energy as compared to particles in ice
• Record your observations for the at the same temperature.
conversion of water in the liquid state When we supply heat energy to water,
to the gaseous state. particles start moving even faster. At a certain
temperature, a point is reached when the
On increasing the temperature of solids, particles have enough energy to break free
the kinetic energy of the particles increases. from the forces of attraction of each other. At
Due to the increase in kinetic energy, the this temperature the liquid starts changing
particles start vibrating with greater speed. into gas. The temperature at which a liquid
The energy supplied by heat overcomes the starts boiling at the atmospheric pressure is
forces of attraction between the particles. The known as its boiling point. Boiling is a bulk
particles leave their fixed positions and start phenomenon. Particles from the bulk of the
moving more freely. A stage is reached when liquid gain enough energy to change into the
the solid melts and is converted to a liquid. vapour state.
The minimum temperature at which a solid For water this temperature is 373 K
melts to become a liquid at the atmospheric (100 0C = 273 + 100 = 373 K).
pressure is called its melting point. Can you define the latent heat of
vaporisation? Do it in the same way as we
The melting point of a solid is an indication have defined the latent heat of fusion.
of the strength of the force of attraction Particles in steam, that is, water vapour at
between its particles. 373 K (1000 C) have more energy than water
at the same temperature. This is because
The melting point of ice is 273.15 K*. The particles in steam have absorbed extra energy
process of melting, that is, change of solid in the form of latent heat of vaporisation.
state into liquid state is also known as fusion.
When a solid melts, its temperature
remains the same, so where does the heat
energy go?
You must have observed, during the
experiment of melting, that the temperature So, we infer that the state of matter can
of the system does not change after the be changed into another state by changing
melting point is reached, till all the ice melts. the temperature.
This happens even though we continue to We have learnt that substances around
heat the beaker, that is, we continue to supply us change state from solid to liquid and from
heat. This heat gets used up in changing the liquid to gas on application of heat. But there
*Note: Kelvin is the SI unit of temperature, 00 C =273.15 K. For convenience, we take 00 C = 273 K after
rounding off the decimal. To change a temperature on the Kelvin scale to the Celsius scale you
have to subtract 273 from the given temperature, and to convert a temperature on the Celsius
scale to the Kelvin scale you have to add 273 to the given temperature.
2020-21
are some that change directly from solid state enclosed in a cylinder? Will the particles come
to gaseous state and vice versa without closer? Do you think that increasing or
changing into the liquid state. decreasing the pressure can change the state
of matter?
Activity _____________ 1.13
• Take some camphor or ammonium
chloride. Crush it and put it in a china
dish.
• Put an inverted funnel over the china
dish.
• Put a cotton plug on the stem of the
funnel, as shown in Fig. 1.7.
* atmosphere (atm) is a unit of measuring pressure exerted by a gas. The unit of pressure is Pascal (Pa):
1 atmosphere = 1.01 × 105 Pa. The pressure of air in atmosphere is called atmospheric pressure. The
atmospheric pressure at sea level is 1 atmosphere, and is taken as the normal atmospheric pressure.
8 SCIENCE
2020-21
Q
dish and keep it inside a cupboard or
uestions on a shelf in your class.
1. Convert the following • Record the room temperature.
temperature to celsius scale: • Record the time or days taken for the
a. 300 K b. 573 K. evaporation process in the above cases.
2. What is the physical state of • Repeat the above three steps of activity
water at: on a rainy day and recor d your
a. 250ºC b. 100ºC ? observations.
3. For any substance, why does the • What do you infer about the effect of
temperature remain constant temperature, surface area and wind
during the change of state? velocity (speed) on evaporation?
4. Suggest a method to liquefy You must have observed that the rate of
atmospheric gases.
evaporation increases with–
• an increase of surface area:
1.5 Evaporation We know that evaporation is a surface
Do we always need to heat or change pressure phenomenon. If the surface area is
for changing the state of matter? Can you increased, the rate of evaporation
quote some examples from everyday life where increases. For example, while putting
change of state from liquid to vapour takes clothes for drying up we spread them out.
place without the liquid reaching the boiling • an increase of temperature:
point? Water, when left uncovered, slowly With the increase of temperature, more
changes into vapour. Wet clothes dry up. number of particles get enough kinetic
What happens to water in the above two energy to go into the vapour state.
examples? • a decrease in humidity:
We know that particles of matter are Humidity is the amount of water vapour
always moving and are never at rest. At a
present in air. The air around us cannot
given temperature in any gas, liquid or solid,
hold more than a definite amount of
there are particles with different amounts of
kinetic energy. In the case of liquids, a small water vapour at a given temperature. If
fraction of particles at the surface, having the amount of water in air is already high,
higher kinetic energy, is able to break away the rate of evaporation decreases.
from the forces of attraction of other particles • an increase in wind speed:
and gets converted into vapour. This It is a common observation that clothes
phenomenon of change of a liquid into dry faster on a windy day. With the
vapours at any temperature below its boiling increase in wind speed, the particles of
point is called evaporation. water vapour move away with the wind,
decreasing the amount of water vapour
1.5.1 FACTORS AFFECTING EVAPORATION in the surrounding.
Let us understand this with an activity. 1.5.2 HOW DOES EVAPORATION CAUSE
2020-21
What happens when you pour some Why do we see water droplets on the outer
acetone (nail polish remover) on your palm? surface of a glass containing ice-cold
The particles gain energy from your palm or water?
surroundings and evaporate causing the Let us take some ice-cold water in a
palm to feel cool. tumbler. Soon we will see water droplets on
After a hot sunny day, people sprinkle the outer surface of the tumbler. The water
water on the roof or open ground because vapour present in air, on coming in contact
the large latent heat of vaporisation of water with the cold glass of water, loses energy and
helps to cool the hot surface. gets converted to liquid state, which we see
Can you cite some more examples from as water droplets.
daily life where we can feel the effect of cooling
due to evaporation? uestions
Q
Why should we wear cotton clothes in
summer? 1. Why does a desert cooler cool
During summer, we perspire more better on a hot dry day?
because of the mechanism of our body which 2. How does the water kept in an
keeps us cool. We know that during earthen pot (matka) become cool
evaporation, the particles at the surface of during summer?
the liquid gain energy from the surroundings 3. Why does our palm feel cold
or body surface and change into vapour. The when we put some acetone or
heat energy equal to the latent heat of petrol or perfume on it?
vaporisation is absorbed from the body 4. Why are we able to sip hot tea or
leaving the body cool. Cotton, being a good milk faster from a saucer rather
absorber of water helps in absorbing the than a cup?
sweat and exposing it to the atmosphere for 5. What type of clothes should we
easy evaporation. wear in summer?
Now scientists are talking of five states of matter: Solid, Liquid, Gas, Plasma and Bose-
Einstein Condensate.
Plasma: The state consists of super energetic and super excited particles. These particles
are in the form of ionised gases. The fluorescent tube and neon sign bulbs consist of
plasma. Inside a neon sign bulb there is neon gas and inside a fluorescent tube there
is helium gas or some other gas. The gas gets ionised, that is, gets charged when
electrical energy flows through it. This charging up creates a plasma glowing inside
the tube or bulb. The plasma glows with a special colour depending on the nature of
More to know
gas. The Sun and the stars glow because of the presence of plasma in them. The plasma
is created in stars because of very high temperature.
Bose-Einstein Condensate: In 1920, Indian physicist Satyendra Nath Bose had done
some calculations for a fifth state of matter. Building on his calculations, Albert Einstein
predicted a new state of matter – the Bose-Einstein
Condensate (BEC). In 2001, Eric A. Cornell, Wolfgang
Ketterle and Carl E. Wieman of USA received the Nobel
prize in physics for achieving “Bose-Einstein
condensation”. The BEC is formed by cooling a gas of
extremely low density, about one-hundred-thousandth
the density of normal air, to super low temperatures.
You can log on to www.chem4kids.com to get more
S.N. Bose Albert Einstein
(1894-1974) (1879-1955) information on these fourth and fifth states of matter.
10 SCIENCE
2020-21
What
you have
learnt
• Matter is made up of small particles.
• The matter around us exists in three states— solid, liquid
and gas.
• The forces of attraction between the particles are maximum in
solids, intermediate in liquids and minimum in gases.
• The spaces in between the constituent particles and kinetic
energy of the particles are minimum in the case of solids,
intermediate in liquids and maximum in gases.
• The arrangement of particles is most ordered in the case of
solids, in the case of liquids layers of particles can slip and
slide over each other while for gases, there is no order, particles
just move about randomly.
• The states of matter are inter-convertible. The state of matter
can be changed by changing temperature or pressure.
• Sublimation is the change of solid state directly to gaseous
state without going through liquid state.
• Deposition is the change of gaseous state directly to solid
state without going through liquid state.
• Boiling is a bulk phenomenon. Particles from the bulk
(whole) of the liquid change into vapour state.
• Evaporation is a surface phenomenon. Particles from the
surface gain enough energy to overcome the forces of attraction
present in the liquid and change into the vapour state.
• The rate of evaporation depends upon the surface area exposed
to the atmosphere, the temperature, the humidity and the
wind speed.
• Evaporation causes cooling.
• Latent heat of vaporisation is the heat energy required to change
1 kg of a liquid to gas at atmospheric pressure at its boiling
point.
• Latent heat of fusion is the amount of heat energy required
to change 1 kg of solid into liquid at its melting point.
MATTER IN OUR SURROUNDING S 11
2020-21
• Some measurable quantities and their units to remember:
Exercises
1. Convert the following temperatures to the celsius scale.
(a) 293 K (b) 470 K
2. Convert the following temperatures to the kelvin scale.
(a) 25°C (b) 373°C
3. Give reason for the following observations.
(a) Naphthalene balls disappear with time without leaving
any solid.
(b) We can get the smell of perfume sitting several metres
away.
4. Arrange the following substances in increasing order of forces
of attraction between the particles— water, sugar, oxygen.
5. What is the physical state of water at—
(a) 25°C (b) 0°C (c) 100°C ?
6. Give two reasons to justify—
(a) water at room temperature is a liquid.
(b) an iron almirah is a solid at room temperature.
7. Why is ice at 273 K more effective in cooling than water at the
same temperature?
8. What produces more severe burns, boiling water or steam?
9. Name A,B,C,D,E and F in the following diagram showing
change in its state
12 SCIENCE
2020-21
Group Activity
Prepare a model to demonstrate movement of particles in solids,
liquids and gases.
For making this model you will need
• A transparent jar
• A big rubber balloon or piece of stretchable rubber sheet
• A string
• Few chick-peas or black gram or dry green peas.
How to make?
• Put the seeds in the jar.
• Sew the string to the centre of the rubber sheet and put some
tape to keep it tied securely.
• Stretch and tie the rubber sheet on the mouth of the jar.
• Your model is ready. Now run your fingers up and down the
string by first tugging at it slowly and then rapidly.
Fig. 1.10: A model for converting of solid to liquid and liquid to gas.
2020-21
CBSE Class 9 Study Materials
NCERT Solutions for class 9 Maths
NCERT Solutions for class 9 Science
NCERT Solutions for class 9 Social Science
CBSE Class 9 Social Science Map Pointing Skills
Class 8 Social Science Geography
Class 8 Social Science History
Class 8 Social Science Civics
Class 8 Sanskrit
NCERT Solutions for class 9 English
NCERT Solutions Class 9 English Literature
Reader
NCERT Solutions for Class 9 English Beehive
NCERT Solutions for Class 9 English Moments
NCERT Solutions for Class 9 English Main Course
Book
NCERT Solutions for class 9 Hindi
NCERT Solutions for class 9 Foundation of
Information Technology
NCERT Exemplar Class 9 Maths Solutions
NCERT Exemplar Class 9 Science Solutions
Unseen Passages for Class 9
Unseen Poem for Class 9
Printable Worksheets for Class 9