9th Class Science Com

Presents NCERT Text Books
NCERT Text Books: 9

th
Class Science

About Us: Prep4Civils, website is a part of Sukratu Innovations, a start up by IITians. The main theme of the company is to
develop new web services which will help people. Prep4Civils is an online social networking platform intended for the
welfare of people who are preparing for Civil services examinations. The whole website was built on open-source platform
Wordpress.

Contact Details:
Website: http://www.prep4civils.com/ Email: [email protected]

Disclaimer and Terms of Use: By following Creative Common License, for the welfare of large student body we are merging
all the PDF files provided by NCERT website and redistributing the files by giving proper credit to NCERT website and the
redistribution is based on the norms of Creative Common License. We are not commercially distributing the files. People
who are downloading these files should not be engaged in any sort of sales or commercial distribution of these files. They
can redistribute these copies freely by giving proper credit to the original author, NCERT
(http://www.ncert.nic.in/NCERTS/textbook/textbook.htm) and Prep4Civils (http://www.prep4civils.com/) by providing
proper hyperlinks of the websites. Any sort of clichs can be addressed at [email protected] and proper action will
be taken.
CONTENTS
FOREWORD iii
Chapter 1 MATTER IN OUR SURROUNDINGS 1
Chapter 2 IS MATTER AROUND US PURE 14
Chapter 3 ATOMS AND MOLECULES 31
Chapter 4 STRUCTURE OF THE ATOM 46
Chapter 5 THE FUNDAMENTAL UNIT OF LIFE 57
Chapter 6 TISSUES 68
Chapter 7 DIVERSITY IN LIVING ORGANISMS 80
Chapter 8 MOTION 98
Chapter 9 FORCE AND LAWS OF MOTION 114
Chapter 10 GRAVITATION 131
Chapter 11 WORK AND ENERGY 146
Chapter 12 SOUND 160
Chapter 13 WHY DO WE FALL ILL 176
Chapter 14 NATURAL RESOURCES 189
Chapter 15 IMPROVEMENT IN FOOD RESOURCES 203
ANSWERS 216 218
As we look at our surroundings, we see a large
variety of things with different shapes, sizes
and textures. Everything in this universe is
made up of material which scientists have
named matter. The air we breathe, the food
we eat, stones, clouds, stars, plants and
animals, even a small drop of water or a
particle of sand each thing is matter. We can
also see as we look around that all the things
mentioned above occupy space, that is,
volume* and have mass.
Since early times, human beings have
been trying to understand their surroundings.
Early Indian philosophers classified matter in
the form of five basic elements the
Panch Tatva air, earth, fire, sky and water.
According to them everything, living or non-
living, was made up of these five basic
elements. Ancient Greek philosophers had
arrived at a similar classification of matter.
Modern day scientists have evolved two
types of classification of matter based on their
physical properties and chemical nature.
In this chapter we shall learn about
matter based on its physical properties.
Chemical aspects of matter will be taken up
in subsequent chapters.
1.1 Physical Nature of Matter
1.1.1 MATTER IS MADE UP OF PARTICLES
For a long time, two schools of thought
prevailed regarding the nature of matter. One
school believed matter to be continuous like
a block of wood, whereas, the other thought
that matter was made up of particles like
sand. Let us perform an activity to decide
about the nature of matter is it continuous
or particulate?
Activity ______________ 1.1
Take a 100 mL beaker.
Fill half the beaker with water and
mark the level of water.
Dissolve some salt/ sugar with the help
of a glass rod.
Observe any change in water level.
What do you think has happened to
the salt?
Where does it disappear?
Does the level of water change?
In order to answer these questions we
need to use the idea that matter is made up
of particles. What was there in the spoon, salt
or sugar, has now spread throughout water.
This is illustrated in Fig. 1.1.
1.1.2 HOW SMALL ARE THESE PARTICLES
OF MATTER?
Activity ______________ 1.2
Take 2-3 crystals of potassium
permanganate and dissolve them in
100 mL of water.
Fig. 1.1: When we dissolve salt in water, the particles
of salt get into the spaces between particles
of water.
* The SI unit of volume is cubic metre (m
3
). The common unit of measuring volume is
litre (L) such that 1L = 1 dm
3
, 1L = 1000 mL, 1 mL = 1 cm
3
.
1 1
1 11
M M
M MMATTER ATTER ATTER ATTER ATTER
IN IN IN IN IN O O
O OOUR UR UR UR UR S S
S SSURROUNDINGS URROUNDINGS URROUNDINGS URROUNDINGS URROUNDINGS
Chapter
SCIENCE 2
Take out approximately 10 mL of this
solution and put it into 90 mL of clear
water.
Take out 10 mL of this solution and
put it into another 90 mL of clear water.
Keep diluting the solution like this 5 to
8 times.
Is the water still coloured ?
1.2.2 PARTICLES OF MATTER ARE
CONTINUOUSLY MOVING
Activity ______________ 1.3
Put an unlit incense stick in a corner
of your class. How close do you have to
go near it so as to get its smell?
Now light the incense stick. What
happens? Do you get the smell sitting
at a distance?
Record your observations.
Activity ______________ 1.4
Take two glasses/beakers filled with
water.
Put a drop of blue or red ink slowly
and carefully along the sides of the first
beaker and honey in the same way in
the second beaker.
Leave them undisturbed in your house
or in a corner in the class.
Record your observations.
What do you observe immediately after
adding the ink drop?
What do you observe immediately after
adding a drop of honey?
How many hours or days does it take
for the colour of ink to spread evenly
throughout the water?
Activity ______________ 1.5
Drop a crystal of copper sulphate or
potassium permanganate into a glass
of hot water and another containing
cold water. Do not stir the solution.
Allow the crystals to settle at the
bottom.
What do you observe just above the
solid crystal in the glass?
What happens as time passes?
What does this suggest about the
particles of solid and liquid?
Does the rate of mixing change with
temperature? Why and how?
From the above three activities (1.3, 1.4 and
1.5), we can conclude the following:
Fig. 1.2: Estimating how small are the particles of
matter. With every dilution, though the colour
becomes light, it is still visible.
This experiment shows that just a few
crystals of potassium permanganate can
colour a large volume of water (about
1000 L). So we conclude that there must be
millions of tiny particles in just one crystal
of potassium permanganate, which keep on
dividing themselves into smaller and smaller
particles. Ultimately a stage is reached when
the particles cannot divide further into
smaller particles.
The same activity can be done using
2 mL of Dettol instead of potassium
permanganate. The smell can be detected
even on repeated dilution.
The particles of matter are very small
they are small beyond our imagination!!!!
1.2 Characteristics of Particles of
Matter
1.2.1 PARTICLES OF MATTER HAVE SPACE
BETWEEN THEM
In activities 1.1 and 1.2 we saw that particles
of sugar, salt, Dettol, or potassium
permanganate got evenly distributed in water.
Similarly, when we make tea, coffee or
lemonade (nimbu paani ), particles of one type
of matter get into the spaces between particles
of the other. This shows that there is enough
space between particles of matter.
MATTER IN OUR SURROUNDI NGS 3
If we consider each student as a particle
of matter, then in which group the
particles held each other with the
maximum force?
Activity ______________ 1.7
Take an iron nail, a piece of chalk and
a rubber band.
Try breaking them by hammering,
cutting or stretching.
In which of the above three substances
do you think the particles are held
together with greater force?
Activity ______________ 1.8
Open a water tap, try breaking the
stream of water with your fingers.
Were you able to cut the stream of
water?
What could be the reason behind the
stream of water remaining together?
The above three activities (1.6, 1.7 and
1.8) suggest that particles of matter have force
acting between them. This force keeps the
particles together. The strength of this force
of attraction varies from one kind of matter
to another.
uestions
1. Which of the following are
matter?
Chair, air, love, smell, hate,
almonds, thought, cold, cold-
drink, smell of perfume.
2. Give reasons for the following
observation:
The smell of hot sizzling food
reaches you several metres
away, but to get the smell from
cold food you have to go close.
3. A diver is able to cut through
water in a swimming pool. Which
property of matter does this
observation show?
4. What are the characteristics of
the particles of matter?
Particles of matter are continuously
moving, that is, they possess what we call
the kinetic energy. As the temperature rises,
particles move faster. So, we can say that with
increase in temperature the kinetic energy of
the particles also increases.
In the above three activities we observe
that particles of matter intermix on their own
with each other. They do so by getting into
the spaces between the particles. This
intermixing of particles of two different types
of matter on their own is called diffusion. We
also observe that on heating, diffusion
becomes faster. Why does this happen?
1.2.3 PARTICLES OF MATTER ATTRACT
EACH OTHER
Activity ______________ 1.6
Play this game in the field make four
groups and form human chains as
suggested:
The first group should hold each other
from the back and lock arms like Bihu
dancers (Fig. 1.3).
Fig. 1.3
The second group should hold hands
to form a human chain.
The third group should form a chain
by touching each other with only their
finger tips.
Now, the fourth group of students
should run around and try to break the
three human chains one by one into
as many small groups as possible.
Which group was the easiest to break?
Why?
Q
SCIENCE 4
1.3 States of Matter
Observe different types of matter around you.
What are its different states? We can see that
matter around us exists in three different
states solid, liquid and gas. These states of
matter arise due to the variation in the
characteristics of the particles of matter.
Now, let us study about the properties of
these three states of matter in detail.
1.3.1 THE SOLID STATE
Activity _____________ 1.9
Collect the following articles a pen, a
book, a needle and a piece of thread.
Sketch the shape of the above articles
in your notebook by moving a pencil
around them.
Do all these have a definite shape,
distinct boundaries and a fixed
volume?
What happens if they are hammered,
pulled or dropped?
Are these capable of diffusing into each
other?
Try compressing them by applying
force. Are you able to compress them?
All the above are examples of solids. We
can observe that all these have a definite
shape, distinct boundaries and fixed volumes,
that is, have negligible compressibility. Solids
have a tendency to maintain their shape when
subjected to outside force. Solids may break
under force but it is difficult to change their
shape, so they are rigid.
Consider the following:
(a) What about a rubber band, can it
change its shape on stretching? Is it
a solid?
(b) What about sugar and salt? When
kept in different jars these take the
shape of the jar. Are they solid?
(c) What about a sponge? It is a solid
yet we are able to compress it. Why?
All the above are solids as:
A rubber band changes shape under
force and regains the same shape when
the force is removed. If excessive force is
applied, it breaks.
The shape of each individual sugar or
salt crystal remains fixed, whether we
take it in our hand, put it in a plate or in
a jar.
A sponge has minute holes, in which
air is trapped, when we press it, the air
is expelled out and we are able to
compress it.
1.3.2 THE LIQUID STATE
Activity _____________1.10
Collect the following:
(a) water, cooking oil, milk, juice, a
cold drink.
(b) containers of different shapes. Put
a 50 mL mark on these containers
using a measuring cylinder from
the laboratory.
What will happen if these liquids are
spilt on the floor?
Measure 50 mL of any one liquid and
transfer it into different containers one
by one. Does the volume remain the
same?
Does the shape of the liquid remain the
same ?
When you pour the liquid from one
container into another, does it flow
easily?
We observe that liquids have no fixed
shape but have a fixed volume. They take up
the shape of the container in which they are
kept. Liquids flow and change shape, so they
are not rigid but can be called fluid.
Refer to activities 1.4 and 1.5 where we
saw that solids and liquids can diffuse into
liquids. The gases from the atmosphere
diffuse and dissolve in water. These gases,
especially oxygen and carbon dioxide, are
essential for the survival of aquatic animals
and plants.
All living creatures need to breathe for
survival. The aquatic animals can breathe
under water due to the presence of dissolved
oxygen in water. Thus, we may conclude that
solids, liquids and gases can diffuse into
liquids. The rate of diffusion of liquids is
higher than that of solids. This is due to the
fact that in the liquid state, particles move
freely and have greater space between each
other as compared to particles in the solid
state.
1.3.3 THE GASEOUS STATE
Have you ever observed a balloon seller filling
a large number of balloons from a single
cylinder of gas? Enquire from him how many
balloons is he able to fill from one cylinder.
Ask him which gas does he have in the cylinder.
Activity _____________1.11
Take three 100 mL syringes and close
their nozzles by rubber corks, as
shown in Fig.1.4.
Remove the pistons from all the
syringes.
Leaving one syringe untouched, fill
water in the second and pieces of chalk
in the third.
Insert the pistons back into the
syringes. You may apply some vaseline
on the pistons before inserting them
into the syringes for their smooth
movement.
Now, try to compress the content by
pushing the piston in each syringe.
We have observed that gases are highly
compressible as compared to solids and
liquids. The liquefied petroleum gas (LPG)
cylinder that we get in our home for cooking
or the oxygen supplied to hospitals in
cylinders is compressed gas. Compressed
natural gas (CNG) is used as fuel these days
in vehicles. Due to its high compressibility,
large volumes of a gas can be compressed
into a small cylinder and transported easily.
We come to know of what is being cooked
in the kitchen without even entering there,
by the smell that reaches our nostrils. How
does this smell reach us? The particles of the
aroma of food mix with the particles of air
spread from the kitchen, reach us and even
farther away. The smell of hot cooked food
reaches us in seconds; compare this with the
rate of diffusion of solids and liquids. Due to
high speed of particles and large space
between them, gases show the property of
diffusing very fast into other gases.
In the gaseous state, the particles move
about randomly at high speed. Due to this
random movement, the particles hit each
other and also the walls of the container. The
pressure exerted by the gas is because of this
force exerted by gas particles per unit area
on the walls of the container.
Fig. 1.4
What do you observe? In which case
was the piston easily pushed in?
What do you infer from your
observations?
Fig.1.5: a, b and c show the magnified schematic
pictures of the three states of matter. The
motion of the particles can be seen and
compared in the three states of matter.
SCIENCE 6
1.4.1 EFFECT OF CHANGE OF TEMPERATURE
Activity _____________1.12
Take about 150 g of ice in a beaker and
suspend a laboratory thermometer so
that its bulb is in contact with the ice,
as in Fig. 1.6.
uestions
1. The mass per unit volume of a
substance is called density.
(density = mass/volume).
Arrange the following in order of
increasing density air, exhaust
from chimneys, honey, water,
chalk, cotton and iron.
2. (a) Tabulate the differences in
the characterisitcs of states
of matter.
(b) Comment upon the following:
rigidity, compressibility,
fluidity, filling a gas
container, shape, kinetic
energy and density.
3. Give reasons
(a) A gas fills completely the
vessel in which it is kept.
(b) A gas exerts pressure on the
walls of the container.
(c) A wooden table should be
called a solid.
(d) We can easily move our hand
in air but to do the same
through a solid block of wood
we need a karate expert.
4. Liquids generally have lower
density as compared to solids.
But you must have observed that
ice floats on water. Find out why.
1.4 Can Matter Change its State?
We all know from our observation that water
can exist in three states of matter
solid, as ice,
liquid, as the familiar water, and
gas, as water vapour.
What happens inside the matter during
this change of state? What happens to the
particles of matter during the change of
states? How does this change of state take
place? We need answers to these questions,
isnt it?
Q
(a)
(b)
Fig. 1.6: (a) Conversion of ice to water, (b) conversion
of water to water vapour
Start heating the beaker on a low flame.
Note the temperature when the ice
starts melting.
Note the temperature when all the ice
has converted into water.
Record your observations for this
conversion of solid to liquid state.
Now, put a glass rod in the beaker and
heat while stirring till the water starts
boiling.
Keep a careful eye on the thermometer
reading till most of the water has
vaporised.
Record your observations for the
conversion of water in the liquid state
to the gaseous state.
On increasing the temperature of solids,
the kinetic energy of the particles increases.
Due to the increase in kinetic energy, the
particles start vibrating with greater speed.
The energy supplied by heat overcomes the
forces of attraction between the particles. The
particles leave their fixed positions and start
moving more freely. A stage is reached when
the solid melts and is converted to a liquid.
The temperature at which a solid melts to
become a liquid at the atmospheric pressure
is called its melting point.
The melting point of a solid is an
indication of the strength of the force of
attraction between its particles.
The melting point of ice is 273.16 K*. The
process of melting, that is, change of solid
state into liquid state is also known as fusion.
When a solid melts, its temperature
remains the same, so where does the heat
energy go?
You must have observed, during the
experiment of melting, that the temperature
of the system does not change after the
melting point is reached, till all the ice melts.
This happens even though we continue to
heat the beaker, that is, we continue to supply
heat. This heat gets used up in changing the
state by overcoming the forces of attraction
between the particles. As this heat energy is
absorbed by ice without showing any rise in
temperature, it is considered that it gets
hidden into the contents of the beaker and is
known as the latent heat. The word latent
means hidden. The amount of heat energy
that is required to change 1 kg of a solid into
liquid at atmospheric pressure at its melting
point is known as the latent heat of fusion.
So, particles in water at 0
0
C (273 K) have
more energy as compared to particles in ice
at the same temperature.
When we supply heat energy to water,
particles start moving even faster. At a certain
temperature, a point is reached when the
particles have enough energy to break free
from the forces of attraction of each other. At
this temperature the liquid starts changing
into gas. The temperature at which a liquid
starts boiling at the atmospheric pressure is
known as its boiling point. Boiling is a bulk
phenomenon. Particles from the bulk of the
liquid gain enough energy to change into the
vapour state.
For water this temperature is 373 K
(100
0
C = 273 + 100 = 373 K).
Can you define the latent heat of
vaporisation? Do it in the same way as we
have defined the latent heat of fusion.
Particles in steam, that is, water vapour at
373 K (100
0
C) have more energy than water
at the same temperature. This is because
particles in steam have absorbed extra energy
in the form of latent heat of vaporisation.
*Note: Kelvin is the SI unit of temperature, 0
0
C =273.16 K. For convenience, we take 0
0
C = 273 K
after rounding off the decimal. To change a temperature on the Kelvin scale to the Celsius scale
you have to subtract 273 from the given temperature, and to convert a temperature on the
Celsius scale to the Kelvin scale you have to add 273 to the given temperature.
So, we infer that the state of matter can
be changed into another state by changing
the temperature.
We have learnt that substances around
us change state from solid to liquid and from
liquid to gas on application of heat. But there
SCIENCE 8
closer? Do you think that increasing or
decreasing the pressure can change the state
of matter?
are some that change directly from solid state
to gaseous state and vice versa without
changing into the liquid state.
Activity _____________1.13
Take some camphor or ammonium
chloride. Crush it and put it in a china
dish.
Put an inverted funnel over the china
dish.
Put a cotton plug on the stem of the
funnel, as shown in Fig. 1.7.
* atmosphere (atm) is a unit of measuring pressure exerted by a gas. The unit of pressure is Pascal (Pa):
1 atmosphere = 1.01 10
5
Pa. The pressure of air in atmosphere is called atmospheric pressure. The
atmospheric pressure at sea level is 1 atmosphere, and is taken as the normal atmospheric pressure.
Fig. 1.7: Sublimation of ammonium chloride
Fig. 1.8: By applying pressure, particles of matter
can be brought close together.
Applying pressure and reducing
temperature can liquefy gases.
Have you heard of solid carbon dioxide
(CO
2
)?

It is stored under high pressure. Solid
CO
2
gets converted directly to gaseous state
on decrease of pressure to 1 atmosphere*
without coming into liquid state. This is the
reason that solid carbon dioxide is also known
as dry ice.
Thus, we can say that pressure and
temperature determine the state of a
substance, whether it will be solid, liquid
or gas.
Now, heat slowly and observe.
What do you infer from the above
activity?
A change of state directly from solid to
gas without changing into liquid state (or vice
versa) is called sublimation.
1.4.2 EFFECT OF CHANGE OF PRESSURE
We have already learnt that the difference in
various states of matter is due to the
difference in the distances between the
constituent particles. What will happen when
we start putting pressure and compress a gas
enclosed in a cylinder? Will the particles come Fig. 1.9: Interconversion of the three states of matter
dish and keep it inside a cupboard or
on a shelf in your class.
Record the room temperature.
Record the time or days taken for the
evaporation process in the above cases.
Repeat the above three steps of activity
on a rainy day and record your
observations.
What do you infer about the effect of
temperature, surface area and wind
velocity (speed) on evaporation?
You must have observed that the rate of
evaporation increases with
an increase of surface area:
We know that evaporation is a surface
phenomenon. If the surface area is
increased, the rate of evaporation
increases. For example, while putting
clothes for drying up we spread them out.
an increase of temperature:
With the increase of temperature, more
number of particles get enough kinetic
energy to go into the vapour state.
a decrease in humidity:
Humidity is the amount of water vapour
present in air. The air around us cannot
hold more than a definite amount of
water vapour at a given temperature. If
the amount of water in air is already high,
the rate of evaporation decreases.
an increase in wind speed:
It is a common observation that clothes
dry faster on a windy day. With the
increase in wind speed, the particles of
water vapour move away with the wind,
decreasing the amount of water vapour
in the surrounding.
1.5.2 HOW DOES EVAPORATION CAUSE
COOLING?
In an open vessel, the liquid keeps on
evaporating. The particles of liquid absorb
energy from the surrounding to regain the
energy lost during evaporation. This
absorption of energy from the surroundings
make the surroundings cold.
uestions
1. Convert the following temperature
to celsius scale:
a. 300 K b. 573 K.
2. What is the physical state of
water at:
a. 250C b. 100C ?
3. For any substance, why does the
temperature remain constant
during the change of state?
4. Suggest a method to liquefy
atmospheric gases.
1.5 Evaporation
Do we always need to heat or change pressure
for changing the state of matter? Can you
quote some examples from everyday life where
change of state from liquid to vapour takes
place without the liquid reaching the boiling
point? Water, when left uncovered, slowly
changes into vapour. Wet clothes dry up.
What happens to water in the above two
examples?
We know that particles of matter are
always moving and are never at rest. At a
given temperature in any gas, liquid or solid,
there are particles with different amounts of
kinetic energy. In the case of liquids, a small
fraction of particles at the surface, having
higher kinetic energy, is able to break away
from the forces of attraction of other particles
and gets converted into vapour. This
phenomenon of change of a liquid into
vapours at any temperature below its boiling
point is called evaporation.
1.5.1 FACTORS AFFECTING EVAPORATION
Let us understand this with an activity.
Activity _____________1.14
Take 5 mL of water in a test tube and
keep it near a window or under a fan.
Take 5 mL of water in an open china
dish and keep it near a window or
under a fan.
Take 5 mL of water in an open china
Q
SCIENCE 10
What happens when you pour some
acetone (nail polish remover) on your palm?
The particles gain energy from your palm or
surroundings and evaporate causing the
palm to feel cool.
After a hot sunny day, people sprinkle
water on the roof or open ground because
the large latent heat of vaporisation of water
helps to cool the hot surface.
Can you cite some more examples from
daily life where we can feel the effect of cooling
due to evaporation?
Why should we wear cotton clothes in
summer?
During summer, we perspire more
because of the mechanism of our body which
keeps us cool. We know that during
evaporation, the particles at the surface of
the liquid gain energy from the surroundings
or body surface and change into vapour. The
heat energy equal to the latent heat of
vaporisation is absorbed from the body
leaving the body cool. Cotton, being a good
absorber of water helps in absorbing the
sweat and exposing it to the atmosphere for
easy evaporation.
Why do we see water droplets on the outer
surface of a glass containing ice-cold
water?
Let us take some ice-cold water in a
tumbler. Soon we will see water droplets on
the outer surface of the tumbler. The water
vapour present in air, on coming in contact
with the cold glass of water, loses energy and
gets converted to liquid state, which we see
as water droplets.
uestions
1. Why does a desert cooler cool
better on a hot dry day?
2. How does the water kept in an
earthen pot (matka) become cool
during summer?
3. Why does our palm feel cold
when we put some acetone or
petrol or perfume on it?
4. Why are we able to sip hot tea or
milk faster from a saucer rather
than a cup?
5. What type of clothes should we
wear in summer?
M
o
r
e

t
o

k
n
o
w
Now scientists are talking of five states of matter: Solid, Liquid, Gas, Plasma and
Bose-Einstein Condensate.
Plasma: The state consists of super energetic and super excited particles. These
particles are in the form of ionised gases. The fluorescent tube and neon sign bulbs
consist of plasma. Inside a neon sign bulb there is neon gas and inside a fluorescent
tube there is helium gas or some other gas. The gas gets ionised, that is, gets charged
when electrical energy flows through it. This charging up creates a plasma glowing
inside the tube or bulb. The plasma glows with a special colour depending on the
nature of gas. The Sun and the stars glow because of the presence of plasma in
them. The plasma is created in stars because of very high temperature.
Bose-Einstein Condensate: In 1920, Indian physicist Satyendra Nath Bose had
done some calculations for a fifth state of matter. Building on his calculations, Albert
Einstein predicted a new state of matter the Bose-
Einstein Condensate (BEC). In 2001, Eric A. Cornell,
Wolfgang Ketterle and Carl E. Wieman of USA received
the Nobel prize in physics for achieving Bose-Einstein
condensation. The BEC is formed by cooling a gas of
extremely low density, about one-hundred-thousandth
the density of normal air, to super low temperatures.
You can log on to www.chem4kids.com to get more
information on these fourth and fifth states of matter.
Q
S.N. Bose
(1894-1974)
Albert Einstein
(1879-1955)
What
you have
learnt
Matter is made up of small particles.
The matter around us exists in three states solid, liquid
and gas.
The forces of attraction between the particles are maximum in
solids, intermediate in liquids and minimum in gases.
The spaces in between the constituent particles and kinetic
energy of the particles are minimum in the case of solids,
intermediate in liquids and maximum in gases.
The arrangement of particles is most ordered in the case of
solids, in the case of liquids layers of particles can slip and
slide over each other while for gases, there is no order, particles
just move about randomly.
The states of matter are inter-convertible. The state of matter
can be changed by changing temperature or pressure.
Sublimation is the change of gaseous state directly to solid
state without going through liquid state, and vice versa.
Boiling is a bulk phenomenon. Particles from the bulk (whole)
of the liquid change into vapour state.
Evaporation is a surface phenomenon. Particles from the
surface gain enough energy to overcome the forces of attraction
present in the liquid and change into the vapour state.
The rate of evaporation depends upon the surface area exposed
to the atmosphere, the temperature, the humidity and the
wind speed.
Evaporation causes cooling.
Latent heat of vaporisation is the heat energy required to change
1 kg of a liquid to gas at atmospheric pressure at its boiling
point.
Latent heat of fusion is the amount of heat energy required to
change 1 kg of solid into liquid at its melting point.
SCIENCE 12
Exercises
1. Convert the following temperatures to the Celsius scale.
(a) 300 K (b) 573 K.
2. Convert the following temperatures to the Kelvin scale.
(a) 25C (b) 373C.
3. Give reason for the following observations.
(a) Naphthalene balls disappear with time without leaving any
solid.
(b) We can get the smell of perfume sitting several metres away.
4. Arrange the following substances in increasing order of forces
of attraction between the particles water, sugar, oxygen.
5. What is the physical state of water at
(a) 25C (b) 0C (c) 100C ?
6. Give two reasons to justify
(a) water at room temperature is a liquid.
(b) an iron almirah is a solid at room temperature.
7. Why is ice at 273 K more effective in cooling than water at the
same temperature?
8. What produces more severe burns, boiling water or steam?
9. Name A,B,C,D,E and F in the following diagram showing change
in its state
Quantity Unit Symbol
Temperature kelvin K
Length metre m
Mass kilogram kg
Weight newton N
Volume cubic metre m
3
Density kilogram per cubic metre kg m
3
Pressure pascal Pa
Some measurable quantities and their units to remember:
Group Activity
Prepare a model to demonstrate movement of particles in solids,
liquids and gases.
For making this model you will need
A transparent jar
A big rubber balloon or piece of stretchable rubber sheet
A string
Few chick-peas or black gram or dry green peas.
How to make?
Put the seeds in the jar.
Sew the string to the centre of the rubber sheet and put some
tape to keep it tied securely.
Stretch and tie the rubber sheet on the mouth of the jar.
Your model is ready. Now run your fingers up and down the
string by first tugging at it slowly and then rapidly.
Fig. 1.10: A model for happy converting of solid to liquid and liquid to gas.
Fig. 2.1: Some consumable items
Have you ever noticed the word pure
written on the packs of these consumables?
For a common person pure means having no
adulteration. But, for a scientist all these
things are actually mixtures of different
substances and hence not pure. For example,
milk is actually a mixture of water, fat,
proteins etc. When a scientist says that
something is pure, it means that all the
constituent particles of that substance are
the same in their chemical nature. A pure
substance consists of a single type of
particles.
As we look around, we can see that most
of the matter around us exist as mixtures of
two or more pure components, for example,
sea water, minerals, soil etc. are all mixtures.
2.1 What is a Mixture?
Mixtures are constituted by more than one
kind of pure form of matter, known as a
substance. A substance cannot be separated
into other kinds of matter by any physical
process. We know that dissolved sodium
chloride can be separated from water by the
physical process of evaporation. However,
sodium chloride is itself a substance and
cannot be separated by physical process into
its chemical constituents. Similarly, sugar is
a substance because it contains only one kind
of pure matter and its composition is the same
throughout.
Soft drink and soil are not single
substances. Whatever the source of a
substance may be, it will always have the
same characteristic properties.
Therefore, we can say that a mixture
contains more than one substance.
2.1.1 TYPES OF MIXTURES
Depending upon the nature of the
components that form a mixture, we can have
different types of mixtures.
Activity ______________ 2.1
Let us divide the class into groups A,
B, C and D.
Group A takes a beaker containing
50 mL of water and one spatula full of
copper sulphate powder. Group B takes
50 mL of water and two spatula full of
copper sulphate powder in a beaker.
Groups C and D can take different
amounts of copper sulphate and
potassium permanganate or common
salt (sodium chloride) and mix the given
components to form a mixture.
Report the observations on the
uniformity in colour and texture.
Groups A and B have obtained a
mixture which has a uniform
composition throughout. Such
mixtures are called homogeneous
mixtures or solutions. Some other
examples of such mixtures are: (i) salt
How do we judge whether milk, ghee, butter,
salt, spices, mineral water or juice that we
buy from the market are pure?
2 2
2 22
I I
I IIS SS SS M M
M MMATTER ATTER ATTER ATTER ATTER A A
A AAROUND ROUND ROUND ROUND ROUND U U
U UUS SS SS P P
P PPURE URE URE URE URE
Chapter
M
o
r
e

t
o

k
n
o
w
in water and (ii) sugar in water.
Compare the colour of the solutions of
the two groups. Though both the
groups have obtained copper sulphate
solution but the intensity of colour of
the solutions is different. This shows
that a homogeneous mixture can have
a variable composition.
Groups C and D have obtained
mixtures, which contain physically
distinct parts and have non-uniform
compositions. Such mixtures are called
heterogeneous mixtures. Mixtures of
sodium chloride and iron filings, salt
and sulphur, and oil and water are
examples of heterogeneous mixtures.
Activity ______________ 2.2
Let us again divide the class into four
groups A, B, C and D.
Distribute the following samples to
each group:
Few crystals of copper sulphate to
group A.
One spatula full of copper
sulphate to group B.
Chalk powder or wheat flour to
group C.
Few drops of milk or ink to
group D.
Each group should add the given
sample in water and stir properly using
a glass rod. Are the particles in the
mixture visible?
Direct a beam of light from a torch
through the beaker containing the
mixture and observe from the front.
Was the path of the beam of light
visible?
Leave the mixtures undisturbed for a
few minutes (and set up the filtration
apparatus in the meantime). Is the
mixture stable or do the particles begin
to settle after some time?
Filter the mixture. Is there any residue
on the filter paper?
Discuss the results and form an
opinion.
Groups A and B have got a solution.
Group C has got a suspension.
Group D has got a colloidal solution.
Now, we shall learn about solutions,
suspensions and colloidal solutions in the
following sections.
uestions
1. What is meant by a pure
substance?
2. List the points of differences
between homogeneous and
heterogeneous mixtures.
2.2 What is a Solution?
A solution is a homogeneous mixture of two
or more substances. You come across various
types of solutions in your daily life. Lemonade,
soda water etc. are all examples of solutions.
Usually we think of a solution as a liquid that
contains either a solid, liquid or a gas
dissolved in it. But, we can also have solid
solutions (alloys) and gaseous solutions (air).
In a solution there is homogeneity at the
particle level. For example, lemonade tastes
the same throughout. This shows that
particles of sugar or salt are evenly distributed
in the solution.
Q
Fig. 2.2: Filtration
Alloys: Alloys are homogeneous
mixtures of metals and cannot be
separated into their components by
physical methods. But still, an alloy
is considered as a mixture because
it shows the properties of its
constituents and can have variable
composition. For example, brass is
a mixture of approximately 30%
zinc and 70% copper.
IS MATTER AROUND US PURE 15
SCIENCE 16
A solution has a solvent and a solute as
its components. The component of the
solution that dissolves the other component
in it (usually the component present in larger
amount) is called the solvent. The component
of the solution that is dissolved in the solvent
(usually present in lesser quantity) is called
the solute.
Examples:
(i) A solution of sugar in water is a solid
in liquid solution. In this solution,
sugar is the solute and water is the
solvent.
(ii) A solution of iodine in alcohol known
as tincture of iodine, has iodine (solid)
as the solute and alcohol (liquid) as
the solvent.
(iii) Aerated drinks like soda water etc., are
gas in liquid solutions. These contain
carbon dioxide (gas) as solute and
water (liquid) as solvent.
(iv) Air is a mixture of gas in gas. Air is a
homogeneous mixture of a number of
gases. Its two main constituents are:
oxygen (21%) and nitrogen (78%). The
other gases are present in very small
quantities.
Properties of a solution
A solution is a homogeneous mixture.
The particles of a solution are smaller
than 1 nm (10
-9
metre) in diameter. So,
they cannot be seen by naked eyes.
Because of very small particle size, they
do not scatter a beam of light passing
through the solution. So, the path of
light is not visible in a solution.
The solute particles cannot be
separated from the mixture by the
process of filtration. The solute particles
do not settle down when left undisturbed,
that is, a solution is stable.
2.2.1 CONCENTRATION OF A SOLUTION
In activity 2.2, we observed that groups A and
B obtained different shades of solutions. So,
we understand that in a solution the relative
proportion of the solute and solvent can be
varied. Depending upon the amount of solute
present in a solution, it can be called a dilute,
concentrated or a saturated solution. Dilute
and concentrated are comparative terms. In
activity 2.2, the solution obtained by group
A is dilute as compared to that obtained by
group B.
Activity ______________ 2.3
Take approximately 50 mL of water
each in two separate beakers.
Add salt in one beaker and sugar or
barium chloride in the second beaker
with continuous stirring.
When no more solute can be dissolved,
heat the contents of the beaker.
Start adding the solute again.
Is the amount of salt and sugar or barium
chloride, that can be dissolved in water at a
given temperature, the same?
At any particular temperature, a solution
that has dissolved as much solute as it is
capable of dissolving, is said to be a saturated
solution. In other words, when no more solute
can be dissolved in a solution at a given
temperature, it is called a saturated solution.
The amount of the solute present in the
saturated solution at this temperature is
called its solubility.
If the amount of solute contained in a
solution is less than the saturation level, it is
called an unsaturated solution.
What would happen if you were to take a
saturated solution at a certain temperature
and cool it slowly.
We can infer from the above activity that
different substances in a given solvent have
different solubilities at the same temperature.
The concentration of a solution is the
amount of solute present in a given amount
(mass or volume) of solution, or the amount
of solute dissolved in a given mass or volume
of solvent.
Concentration of solution = Amount of solute/
Amount of solution
Or
Amount of solute/Amount of solvent
There are various ways of expressing the
concentration of a solution, but here we will
learn only two methods.
(i) Mass by mass percentage of a solution
Mass of solute
= 100
Mass of solution
(ii) Mass by volume percentage of a solution
Mass of solute
= 100
Volume of solution
Example 2.1 A solution contains 40 g of
common salt in 320 g of water.
Calculate the concentration in terms of
mass by mass percentage of the
solution.
Solution:
Mass of solute (salt) = 40 g
Mass of solvent (water) = 320 g
We know,
Mass of solution = Mass of solute +
Mass of solvent
= 40 g + 320 g
= 360 g
Mass percentage of solution
Mass of solute
= 100
Massof solution

40
= 100 =11.1%
360
2.2.2 What is a suspension?
Non-homogeneous systems, like those
obtained by group C in activity 2.2, in which
solids are dispersed in liquids, are called
suspensions. A suspension is a heterogeneous
mixture in which the solute particles do not
dissolve but remain suspended throughout
the bulk of the medium. Particles of a
suspension are visible to the naked eye.
Properties of a Suspension
Suspension is a heterogeneous
mixture.
The particles of a suspension can be
seen by the naked eye.
The particles of a suspension scatter a
beam of light passing through it and
make its path visible.
The solute particles settle down when
a suspension is left undisturbed, that
is, a suspension is unstable. They can
be separated from the mixture by the
process of filtration.
2.2.3 WHAT IS A COLLOIDAL SOLUTION?
The mixture obtained by group D in activity
2.2 is called a colloid or a colloidal solution.
The particles of a colloid are uniformly spread
throughout the solution. Due to the relatively
smaller size of particles, as compared to that
of a suspension, the mixture appears to be
homogeneous. But actually, a colloidal
solution is a heterogeneous mixture, for
example, milk.
Because of the small size of colloidal
particles, we cannot see them with naked
eyes. But, these particles can easily scatter a
beam of visible light as observed in activity
2.2. This scattering of a beam of light is called
the Tyndall effect after the name of the
scientist who discovered this effect.
Tyndall effect can also be observed when
a fine beam of light enters a room through a
small hole. This happens due to the scattering
of light by the particles of dust and smoke in
the air.
Fig. 2.3: (a) Solution of copper sulphate does not
show Tyndall effect, (b) mixture of water
and milk shows Tyndall effect.
(a) (b)
SCIENCE 18
Q
They cannot be separated from the
mixture by the process of filtration. But,
a special technique of separation known
as centrifugation (perform activity 2.5),
can be used to separate the colloidal
particles.
The components of a colloidal solution are
the dispersed phase and the dispersion
medium. The solute-like component or the
dispersed particles in a colloid form the
dispersed phase, and the component in which
the dispersed phase is suspended is known
as the dispersing medium. Colloids are
classified according to the state (solid, liquid
or gas) of the dispersing medium and the
dispersed phase. A few common examples are
given in Table 2.1. From this table you can
see that they are very common everyday life.
uestions
1. Differentiate between homogen-
eous and heterogeneous mixtures
with examples.
2. How are sol, solution and
suspension different from each
other?
3. To make a saturated solution,
36 g of sodium chloride is dissolved
in 100 g of water at 293 K.
Find its concentration at this
temperature.
Tyndall effect can be observed when
sunlight passes through the canopy of a
dense forest. In the forest, mist contains tiny
droplets of water, which act as particles of
colloid dispersed in air.
Fig. 2.4: The Tyndall effect
Properties of a colloid
A colloid is a heterogeneous mixture.
The size of particles of a colloid is too
small to be individually seen by naked
eyes.
Colloids are big enough to scatter a
beam of light passing through it and
make its path visible.
They do not settle down when left
undisturbed, that is, a colloid is quite
stable.
Table 2.1: Common examples of colloids
Dispersed Dispersing Type Example
phase Medium
Liquid Gas Aerosol Fog, clouds, mist
Solid Gas Aerosol Smoke, automobile exhaust
Gas Liquid Foam Shaving cream
Liquid Liquid Emulsion Milk, face cream
Solid Liquid Sol Milk of magnesia, mud
Gas Solid Foam Foam, rubber, sponge, pumice
Liquid Solid Gel Jelly, cheese, butter
Solid Solid Solid Sol Coloured gemstone, milky glass
2.3 Separating the Components
of a Mixture
We have learnt that most of the natural
substances are not chemically pure. Different
methods of separation are used to get
individual components from a mixture.
Separation makes it possible to study and
use the individual components of a mixture.
Heterogeneous mixtures can be separated
into their respective constituents by simple
physical methods like handpicking, sieving,
filtration that we use in our day-to-day life.
Sometimes special techniques have to be used
for the separation of the components of a
mixture.
2.3.1 HOW CAN WE OBTAIN COLOURED
COMPONENT (DYE) FROM BLUE/
BLACK INK?
Activity ______________ 2.4
Fill half a beaker with water.
Put a watch glass on the mouth of the
beaker (Fig. 2.5).
Put few drops of ink on the watch glass.
Now start heating the beaker. We do
not want to heat the ink directly. You
will see that evaporation is taking place
from the watch glass.
Continue heating as the evaporation
goes on and stop heating when you do
not see any further change on the
watch glass.
Observe carefully and record your
observations.
Now answer
What do you think has got evaporated
from the watch glass?
Is there a residue on the watch glass?
What is your interpretation? Is ink a
single substance (pure) or is it a
mixture?
We find that ink is a mixture of a dye in
water. Thus, we can separate the volatile
component (solvent) from its non-volatile
solute by the method of evaporation.
2.3.2 HOW CAN WE SEPARATE CREAM
FROM MILK?
Now-a-days, we get full-cream, toned and
double-toned varieties of milk packed in poly-
packs or tetra packs in the market. These
varieties of milk contain different amounts
of fat.
Activity ______________ 2.5
Take some full-cream milk in a test
tube.
Centrifuge it by using a centrifuging
machine for two minutes. If a
centrifuging machine is not available
in the school, you can do this activity
at home by using a milk churner, used
in the kitchen.
If you have a milk dairy nearby, visit it
and ask (i) how they separate cream
from milk and (ii) how they make
cheese (paneer) from milk.
Now answer
What do you observe on churning the
milk?
Explain how the separation of cream
from milk takes place.
Sometimes the solid particles in a liquid
are very small and pass through a filter paper.
For such particles the filtration technique
cannot be used for separation. Such mixtures
Fig. 2.5: Evaporation
SCIENCE 20
are separated by centrifugation. The principle
is that the denser particles are forced to the
bottom and the lighter particles stay at the
top when spun rapidly.
Applications
Used in diagnostic laboratories for
blood and urine tests.
Used in dairies and home to separate
butter from cream.
Used in washing machines to squeeze
out water from wet clothes.
2.3.3 HOW CAN WE SEPARATE A MIXTURE
OF TWO IMMISCIBLE LIQUIDS?
Activity ______________ 2.6
Let us try to separate kerosene oil from
water using a separating funnel.
Pour the mixture of kerosene oil and
water in a separating funnel (Fig. 2.6).
Let it stand undisturbed for sometime
so that separate layers of oil and water
are formed.
Open the stopcock of the separating
funnel and pour out the lower layer of
water carefully.
Close the stopcock of the separating
funnel as the oil reaches the stop-cock.
Applications
To separate mixture of oil and water.
In the extraction of iron from its ore,
the lighter slag is removed from the top
by this method to leave the molten iron
at the bottom in the furnace.
The principle is that immiscible liquids
separate out in layers depending on their
densities.
OF SALT AND AMMONIUM CHLORIDE?
We have learnt in chapter 1 that ammonium
chloride changes directly from solid to
gaseous state on heating. So, to separate such
mixtures that contain a sublimable volatile
component from a non-sublimable impurity
(salt in this case), the sublimation process is
used (Fig. 2.7). Some examples of solids which
sublime are ammonium chloride, camphor,
naphthalene and anthracene.
Fig. 2.7: Separation of ammonium chloride and salt
by sublimation
Fig. 2.6: Separation of immiscible liquids
2.3.5 IS THE DYE IN BLACK INK A SINGLE
COLOUR?
Activity ______________ 2.7
Take a thin strip of filter paper.
Draw a line on it using a pencil,
approximately 3 cm above the lower
edge [Fig. 2.8 (a)].
Put a small drop of ink (water soluble,
that is, from a sketch pen or fountain
pen) at the centre of the line. Let it dry.
Lower the filter paper into a jar/glass/
beaker/test tube containing water so
that the drop of ink on the paper is just
above the water level, as shown in Fig.
2.8(b) and leave it undisturbed.
Watch carefully, as the water rises up
on the filter paper. Record your
observations.
This process of separation of components
of a mixture is known as chromatography.
Kroma in Greek means colour. This technique
was first used for separation of colours, so
this name was given. Chromatography is the
technique used for separation of those solutes
that dissolve in the same solvent.
With the advancement in technology,
newer techniques of chromatography have
been developed. You will study about
chromatography in higher classes.
Applications
To separate
colours in a dye
pigments from natural colours
drugs from blood.
OF TWO MISCIBLE LIQUIDS?
Activity ______________ 2.8
Let us try to separate acetone and water
from their mixture.
Take the mixture in a distillation flask.
Fit it with a thermometer.
Arrange the apparatus as shown in
Fig. 2.9.
Heat the mixture slowly keeping a close
watch at the thermometer.
The acetone vaporises, condenses in
the condenser and can be collected
from the condenser outlet.
Water is left behind in the distillation
flask.
Fig. 2.8: Separation of dyes in black ink using
chromatography
Now answer
What do you observe on the filter paper
as the water rises on it?
Do you obtain different colours on the
filter paper strip?
What according to you, can be the
reason for the rise of the coloured spot
on the paper strip?
The ink that we use has water as the
solvent and the dye is soluble in it. As the
water rises on the filter paper it takes along
with it the dye particles. Usually, a dye is a
mixture of two or more colours. The coloured
component that is more soluble in water, rises
faster and in this way the colours get
separated.
Fig.2.9: Separation of two miscible liquids by
distillation
SCIENCE 22
Now answer
What do you observe as you start
heating the mixture?
At what temperature does the
thermometer reading become constant
for some time?
What is the boiling point of acetone?
Why do the two components separate?
This method is called distillation. It is used
for the separation of components of a mixture
containing two miscible liquids that boil
without decomposition and have sufficient
difference in their boiling points.
To separate a mixture of two or more
miscible liquids for which the difference in
boiling points is less than 25 K, fractional
distillation process is used, for example, for
the separation of different gases from air,
different factions from petroleum products
etc. The apparatus is similar to that for simple
distillation, except that a fractionating
column is fitted in between the distillation
flask and the condenser.
A simple fractionating column is a tube
packed with glass beads. The beads provide
surface for the vapours to cool and condense
repeatedly, as shown in Fig. 2.10.
2.3.7 HOW CAN WE OBTAIN DIFFERENT
GASES FROM AIR ?
Air is a homogeneous mixture and can be
separated into its components by fractional
distillation. The flow diagram (Fig. 2.11)
shows the steps of the process.
Fig. 2.10: Fractional distillation
Fig. 2.11: Flow diagram shows the process of
obtaining gases from air
If we want oxygen gas from air (Fig. 2.12),
we have to separate out all the other gases
present in the air. The air is compressed by
increasing the pressure and is then cooled
by decreasing the temperature to get liquid
air. This liquid air is allowed to warm-up
slowly in a fractional distillation column,
where gases get separated at different heights
depending upon their boiling points.
Answer the following:
Arrange the gases present in air in
increasing order of their boiling points.
Which gas forms the liquid first as the
air is cooled?
it. To remove these impurities, the process of
crystallisation is used. Crystallisation is a
process that separates a pure solid in the
form of its crystals from a solution.
Crystallisation technique is better than
simple evaporation technique as
some solids decompose or some, like
sugar, may get charred on heating to
dryness.
some impurities may remain dissolved
in the solution even after filtration. On
evaporation these contaminate the
solid.
Applications
Purification of salt that we get from sea
water.
Separation of crystals of alum (phitkari)
from impure samples.
Thus, by choosing one of the above
methods according to the nature of the
components of a mixture, we get a pure
substance. With advancements in technology
many more methods of separation techniques
have been devised.
In cities, drinking water is supplied from
water works. A flow diagram of a typical water
works is shown in Fig. 2.13. From this figure
write down the processes involved to get the
supply of drinking water to your home from
the water works and discuss it in your class.
Fig. 2.12: Separation of components of air
2.3.8 HOW CAN WE OBTAIN PURE COPPER
SULPHATE FROM AN IMPURE SAMPLE?
Activity ______________ 2.9
Take some (approximately 5 g) impure
sample of copper sulphate in a china
dish.
Dissolve it in minimum amount of
water.
Filter the impurities out.
Evaporate water from the copper
sulphate solution so as to get a
saturated solution.
Cover the solution with a filter paper
and leave it undisturbed at room
temperature to cool slowly for a day.
You will obtain the crystals of copper
sulphate in the china dish.
This process is called crystallisation.
Now answer
What do you observe in the china dish?
Do the crystals look alike?
How will you separate the crystals from
the liquid in the china dish?
The crystallisation method is used to
purify solids. For example, the salt we get
from sea water can have many impurities in
SCIENCE 24
uestions
1. How will you separate a mixture
containing kerosene and petrol
(difference in their boiling points
is more than 25C), which are
miscible with each other?
2. Name the technique to separate
(i) butter from curd,
(ii) salt from sea-water,
(iii) camphor from salt.
3. What type of mixtures are
separated by the technique of
crystallisation?
2.4 Physical and Chemical
Changes
To understand the difference between a pure
substance and a mixture, let us understand
the difference between a physical and a
chemical change.
In the previous chapter, we have learnt
about a few physical properties of matter. The
properties that can be observed and specified
like colour, hardness, rigidity, fluidity,
density, melting point, boiling point etc. are
the physical properites.
The interconversion of states is a physical
change because these changes occur without
a change in composition and no change in
the chemical nature of the substance.
Although ice, water and water vapour all look
different and display different physical
properties, they are chemically the same.
Q
Fig. 2.13: Water purification system in water works
Both water and cooking oil are liquid but
their chemical characteristics are different.
They differ in odour and inflammability. We
know that oil burns in air whereas water
extinguishes fire. It is this chemical property
of oil that makes it different from water.
Burning is a chemical change. During this
process one substance reacts with another
to undergo a change in chemical composition.
Chemical change brings change in the
chemical properties of matter and we get new
substances. A chemical change is also called
a chemical reaction.
During burning of a candle, both physical
and chemical changes take place. Can you
distinguish these?
uestions
1. Classify the following as
chemical or physical changes:
cutting of trees,
melting of butter in a pan,
rusting of almirah,
boiling of water to form steam,
passing of electric current,
through water and the water
breaking down into hydrogen
and oxygen gases,
dissolving common salt in
water,
making a fruit salad with raw
fruits, and
burning of paper and wood.
2. Try segregating the things
around you as pure substances
or mixtures.
Q
2.5 What are the Types of Pure
Substances?
On the basis of their chemical composition,
substances can be classified either as
elements or compounds.
2.5.1 ELEMENTS
Robert Boyle was the first scientist to use the
term element in 1661. Antoine Laurent
Lavoisier (1743-94), a French chemist, was
the first to establish an experimentally useful
definition of an element. He defined an
element as a basic form of matter that cannot
be broken down into simpler substances by
chemical reactions.
Elements can be normally divided into
metals, non-metals and metalloids.
Metals usually show some or all of the
following properties:
They have a lustre (shine).
They have silvery-grey or golden-yellow
colour.
They conduct heat and electricity.
They are ductile (can be drawn into
wires).
They are malleable (can be hammered
into thin sheets).
They are sonorous (make a ringing
sound when hit).
Examples of metals are gold, silver,
copper, iron, sodium, potassium etc. Mercury
is the only metal that is liquid at room
temperature.
Non-metals usually show some or all of
the following properties:
They display a variety of colours.
They are poor conductors of heat and
electricity.
They are not lustrous, sonorous or
malleable.
Examples of non-metals are hydrogen,
oxygen, iodine, carbon (coal, coke),
bromine, chlorine etc. Some elements have
intermediate properties between those of
metals and non-metals, they are
called metalloids; examples are boron,
silicon, germanium etc.
M
o
r
e

t
o

k
n
o
w
The number of elements known
at present are more than 100.
Ninety-two elements are naturally
occurring and the rest are man-
made.
Majority of the elements are solid.
Eleven elements are in gaseous
state at room temperature.
Two elements are liquid at room
temperaturemercury and
bromine.
Elements, gallium and cesium
become liquid at a temperature
slightly above room temperature
(303 K).
2.5.2 COMPOUNDS
A compound is a substance composed of two
or more elements, chemically combined with
one another in a fixed proportion.
What do we get when two or more elements
are combined?
Activity _____________2.10
Divide the class into two groups. Give
50 g of iron filings and 3 g of sulphur
powder in a china dish to both the
groups.
Group I
Mix and crush iron filings and sulphur
powder.
Group II
Mix and crush iron filings and sulphur
powder. Heat this mixture strongly till
red hot. Remove from flame and let the
mixture cool.
Groups I and II
Check for magnetism in the material
obtained. Bring a magnet near the
material and check if the material is
attracted towards the magnet.
Compare the texture and colour of the
material obtained by the groups.
Add carbon disulphide to one part of
the material obtained. Stir well and
filter.
Add dilute sulphuric acid or dilute
hydrochloric acid to the other part of
SCIENCE 26
the material obtained.(Note: teacher
supervision is necessary for this
activity).
Perform all the above steps with both
the elements (iron and sulphur)
separately.
Now answer
Did the material obtained by the two
groups look the same?
Which group has obtained a material
with magnetic properties?
Can we separate the components of the
material obtained?
On adding dilute sulphuric acid or
dilute hydrochloric acid, did both the
groups obtain a gas? Did the gas in
both the cases smell the same or
different?
The gas obtained by Group I is hydrogen,
it is colourless, odourless and combustible
it is not advised to do the combustion test for
hydrogen in the class. The gas obtained by
Group II is hydrogen sulphide. It is a
colourless gas with the smell of rotten eggs.
You must have observed that the products
obtained by both the groups show different
properties, though the starting materials were
the same. Group I has carried out the activity
involving a physical change whereas in case
of Group II, a chemical change (a chemical
reaction) has taken place.
The material obtained by group I is a
mixture of the two substances. The
substances given are the elements iron
and sulphur.
The properties of the mixture are the
same as that of its constituents.
The material obtained by group II is a
compound.
On heating the two elements strongly
we get a compound, which has totally
different properties compared to the
combining elements.
The composition of a compound is the
same throughout. We can also observe
that the texture and the colour of the
compound are the same throughout.
Thus, we can summarise the physical
and chemical nature of matter in the
following graphical organiser :
Table 2.2: Mixtures and Compounds
Mixtures Compounds
1. Elements or compounds just mix 1. Elements react to form new compounds.
together to form a mixture and no
new compound is formed.
2. A mixture has a variable composition. 2. The composition of each new substance
is always fixed.
3, A mixture shows the properties of the 3. The new substance has totally different
constituent substances. properties.
4. The constituents can be seperated 4. The constituents can be separated only
fairly easily by physical methods. by chemical or electrochemical
reactions.
What
you have
learnt
A mixture contains more than one substance (element and/or
compound) mixed in any proportion.
Mixtures can be separated into pure substances using
appropriate separation techniques.
A solution is a homogeneous mixture of two or more substances.
The major component of a solution is called the solvent, and
the minor, the solute.
The concentration of a solution is the amount of solute present
per unit volume or per unit mass of the solution/solvent.
Materials that are insoluble in a solvent and have particles
that are visible to naked eyes, form a suspension. A suspension
is a heterogeneous mixture.
Colloids are heterogeneous mixtures in which the particle size
is too small to be seen with the naked eye, but is big enough to
scatter light. Colloids are useful in industry and daily life. The
particles are called the dispersed phase and the medium in
which they are distributed is called the dispersion medium.
Pure substances can be elements or compounds. An element
is a form of matter that cannot be broken down by chemical
reactions into simpler substances. A compound is a substance
composed of two or more different types of elements, chemically
combined in a fixed proportion.
Properties of a compound are different from its constituent
elements, whereas a mixture shows the properties of its
constituting elements or compounds.
SCIENCE 28
Exercises
1. Which separation techniques will you apply for the separation
of the following?
(a) Sodium chloride from its solution in water.
(b) Ammonium chloride from a mixture containing sodium
chloride and ammonium chloride.
(c) Small pieces of metal in the engine oil of a car.
(d) Different pigments from an extract of flower petals.
(e) Butter from curd.
(f) Oil from water.
(g) Tea leaves from tea.
(h) Iron pins from sand.
(i) Wheat grains from husk.
(j) Fine mud particles suspended in water.
2. Write the steps you would use for making tea. Use the words
solution, solvent, solute, dissolve, soluble, insoluble, filtrate
and residue.
3. Pragya tested the solubility of three different substances at
different temperatures and collected the data as given below
(results are given in the following table, as grams of substance
dissolved in 100 grams of water to form a saturated solution).
(a) What mass of potassium nitrate would be needed to
produce a saturated solution of potassium nitrate in
50 grams of water at 313 K?
(b) Pragya makes a saturated solution of potassium chloride
in water at 353 K and leaves the solution to cool at room
temperature. What would she observe as the solution
cools? Explain.
(c) Find the solubility of each salt at 293 K. Which salt has
the highest solubility at this temperature?
(d) What is the effect of change of temperature on the
solubility of a salt?
Temperature in K
283 293 313 333 353
Potassium nitrate 21 32 62 106 167
Sodium chloride 36 36 36 37 37
Potassium chloride 35 35 40 46 54
Ammonium chloride 24 37 41 55 66
Substance Dissolved
4. Explain the following giving examples.
(a) saturated solution
(b) pure substance
(c) colloid
(d) suspension
5. Classify each of the following as a homogeneous or
heterogeneous mixture.
soda water, wood, air, soil, vinegar, filtered tea.
6. How would you confirm that a colourless liquid given to you is
pure water?
7. Which of the following materials fall in the category of a pure
substance?
(a) Ice
(b) Milk
(c) Iron
(d) Hydrochloric acid
(e) Calcium oxide
(f) Mercury
(g) Brick
(h) Wood
(i) Air.
8. Identify the solutions among the following mixtures.
(a) Soil
(b) Sea water
(c) Air
(d) Coal
(e) Soda water.
9. Which of the following will show Tyndall effect?
(a) Salt solution
(b) Milk
(c) Copper sulphate solution
(d) Starch solution.
10. Classify the following into elements, compounds and mixtures.
(a) Sodium
(b) Soil
(c) Sugar solution
(d) Silver
(e) Calcium carbonate
(f) Tin
(g) Silicon
SCIENCE 30
(h) Coal
(i) Air
(j) Soap
(k) Methane
(l) Carbon dioxide
(m) Blood
11. Which of the following are chemical changes?
(a) Growth of a plant
(b) Rusting of iron
(c) Mixing of iron filings and sand
(d) Cooking of food
(e) Digestion of food
(f) Freezing of water
(g) Burning of a candle.
Group Activity
Take an earthen pot (mutka), some pebbles and sand. Design a
small-scale filtration plant that you could use to clean muddy
water.
Ancient Indian and Greek philosophers have
always wondered about the unknown and
unseen form of matter. The idea of divisibility
of matter was considered long back in India,
around 500 BC. An Indian philosopher
Maharishi Kanad, postulated that if we go on
dividing matter (padarth), we shall get smaller
and smaller particles. Ultimately, a time will
come when we shall come across the smallest
particles beyond which further division will
not be possible. He named these particles
Parmanu. Another Indian philosopher,
Pakudha Katyayama, elaborated this doctrine
and said that these particles normally exist
in a combined form which gives us various
forms of matter.
Around the same era, ancient Greek
philosophers Democritus and Leucippus
suggested that if we go on dividing matter, a
stage will come when particles obtained
cannot be divided further. Democritus called
these indivisible particles atoms (meaning
indivisible). All this was based on
philosophical considerations and not much
experimental work to validate these ideas
could be done till the eighteenth century.
By the end of the eighteenth century,
scientists recognised the difference between
elements and compounds and naturally
became interested in finding out how and why
elements combine and what happens when
they combine.
Antoine L. Lavoisier laid the foundation
of chemical sciences by establishing two
important laws of chemical combination.
3.1 Laws of Chemical Combination
The following two laws of chemical
combination were established after much
experimentations by Lavoisier and
Joseph L. Proust.
3.1.1 LAW OF CONSERVATION OF MASS
Is there a change in mass when a chemical
change (chemical reaction) takes place?
Activity ______________ 3.1
Take one of the following sets, X and Y
of chemicals
X Y
(i) copper sulphate sodium carbonate
(ii) barium chloride sodium sulphate
(iii) lead nitrate sodium chloride
Prepare separately a 5% solution of any
one pair of substances listed under X
and Y in water.
Take a little amount of solution of Y in
a conical flask and some solution of X
in an ignition tube.
Hang the ignition tube in the flask
carefully; see that the solutions do not
get mixed. Put a cork on the flask
(see Fig. 3.1).
Fig. 3.1: Ignition tube containing solution of X, dipped
in a conical flask containing solution of Y.
3 3
3 33
A A
A AATOMS TOMS TOMS TOMS TOMS
AND AND AND AND AND M M
M MMOLECULES OLECULES OLECULES OLECULES OLECULES
Chapter
SCIENCE 32
Weigh the flask with its contents
carefully.
Now tilt and swirl the flask, so that the
solutions X and Y get mixed.
Weigh again.
What happens in the reaction flask?
Do you think that a chemical reaction
has taken place?
Why should we put a cork on the
mouth of the flask?
Does the mass of the flask and its
contents change?
Law of conservation of mass states that
mass can neither be created nor destroyed
in a chemical reaction.
3.1.2 LAW OF CONSTANT PROPORTIONS
Lavoisier, along with other scientists, noted
that many compounds were composed of two
or more elements and each such compound
had the same elements in the same
proportions, irrespective of where the
compound came from or who prepared it.
In a compound such as water, the ratio of
the mass of hydrogen to the mass of oxygen
is always 1:8, whatever the source of water.
Thus, if 9 g of water is decomposed, 1 g of
hydrogen and 8 g of oxygen are always
obtained. Similarly in ammonia, nitrogen and
hydrogen are always present in the ratio 14:3
by mass, whatever the method or the source
from which it is obtained.
This led to the law of constant proportions
which is also known as the law of definite
proportions. This law was stated by Proust
as In a chemical substance the elements are
always present in definite proportions by
mass.
The next problem faced by scientists was
to give appropriate explanations of these laws.
British chemist John Dalton provided the
basic theory about the nature of matter.
Dalton picked up the idea of divisibility of
matter, which was till then just a philosophy.
He took the name atoms as given by the
Greeks and said that the smallest particles
of matter are atoms. His theory was based
on the laws of chemical combination. Daltons
atomic theory provided an explanation for the
law of conservation of mass and the law of
definite proportions.
John Dalton was born in
a poor weavers family in
1766 in England. He
began his career as a
teacher at the age of
twelve. Seven years later
he became a school
principal. In 1793, Dalton
left for Manchester to
teach mathematics,
physics and chemistry in
a college. He spent most of his life there
teaching and researching. In 1808, he
presented his atomic theory which was a
turning point in the study of matter.
According to Daltons atomic theory, all
matter, whether an element, a compound or
a mixture is composed of small particles
called atoms. The postulates of this theory
may be stated as follows:
(i) All matter is made of very tiny particles
called atoms.
(ii) Atoms are indivisible particles, which
cannot be created or destroyed in a
chemical reaction.
(iii) Atoms of a given element are identical
in mass and chemical properties.
(iv) Atoms of different elements have
dif ferent masses and chemical
properties.
(v) Atoms combine in the ratio of small
whole numbers to form compounds.
(vi) The relative number and kinds of
atoms are constant in a given
compound.
You will study in the next chapter that all
atoms are made up of still smaller particles.
uestions
1. In a reaction, 5.3 g of sodium
carbonate reacted with 6 g of
ethanoic acid. The products were
2.2 g of carbon dioxide, 0.9 g
water and 8.2 g of sodium
ethanoate. Show that these
Q
John Dalton
ATOMS AND MOLECULES 33
We might think that if atoms are so
insignificant in size, why should we care
about them? This is because our entire world
is made up of atoms. We may not be able to
see them, but they are there, and constantly
affecting whatever we do. Through modern
techniques, we can now produce magnified
images of surfaces of elements showing
atoms.
observations are in agreement
with the law of conservation of
mass.
sodium carbonate + ethanoic acid
sodium ethanoate + carbon
dioxide + water
2. Hydrogen and oxygen combine in
the ratio of 1:8 by mass to form
water. What mass of oxygen gas
would be required to react
completely with 3 g of hydrogen
gas?
3. Which postulate of Daltons
atomic theory is the result of the
law of conservation of mass?
4. Which postulate of Daltons
atomic theory can explain the law
of definite proportions?
3.2 What is an Atom?
Have you ever observed a mason building
walls, from these walls a room and then a
collection of rooms to form a building? What
is the building block of the huge building?
What about the building block of an ant-hill?
It is a small grain of sand. Similarly, the
building blocks of all matter are atoms.
How big are atoms?
Atoms are very small, they are smaller than
anything that we can imagine or compare
with. More than millions of atoms when
stacked would make a layer barely as thick
as this sheet of paper.
Atomic radius is measured in nanometres.
1/10
9
m = 1 nm
1 m = 10
9
nm
Relative Sizes
Radii (in m) Example
10
10
Atom of hydrogen
10
9
Molecule of water
10
8
Molecule of haemoglobin
10
4
Grain of sand
10
2
Ant
10
1
Watermelon
Fig. 3.2: An image of the surface of silicon
3.2.1 WHAT ARE THE MODERN DAY
SYMBOLS OF ATOMS OF DIFFERENT
ELEMENTS?
Dalton was the first scientist to use the
symbols for elements in a very specific sense.
When he used a symbol for an element he
also meant a definite quantity of that element,
that is, one atom of that element. Berzilius
suggested that the symbols of elements be
made from one or two letters of the name of
the element.
Fig. 3.3: Symbols for some elements as proposed by
Dalton
SCIENCE 34
In the beginning, the names of elements
were derived from the name of the place where
they were found for the first time. For
example, the name copper was taken from
Cyprus. Some names were taken from
specific colours. For example, gold was taken
from the English word meaning yellow.
Now-a-days, IUPAC (International Union of
Pure and Applied Chemistry) approves names
of elements. Many of the symbols are the first
one or two letters of the elements name in
English. The first letter of a symbol is always
written as a capital letter (uppercase) and the
second letter as a small letter (lowercase).
For example
(i) hydrogen, H
(ii) aluminium, Al and not AL
(iii) cobalt, Co and not CO.
Symbols of some elements are formed
from the first letter of the name and a letter,
appearing later in the name. Examples are:
(i) chlorine, Cl, (ii) zinc, Zn etc.
Other symbols have been taken from the
names of elements in Latin, German or Greek.
For example, the symbol of iron is Fe from its
Latin name ferrum, sodium is Na from
natrium, potassium is K from kalium.
Therefore, each element has a name and a
unique chemical symbol.
Table 3.1: Symbols for some elements
Element Symbol Element Symbol Element Symbol
Aluminium Al Copper Cu Nitrogen N
Argon Ar Fluorine F Oxygen O
Barium Ba Gold Au Potassium K
Boron B Hydrogen H Silicon Si
Bromine Br Iodine I Silver Ag
Calcium Ca Iron Fe Sodium Na
Carbon C Lead Pb Sulphur S
Chlorine Cl Magnesium Mg Uranium U
Cobalt Co Neon Ne Zinc Zn
(The above table is given for you to refer
to whenever you study about elements. Do
not bother to memorise all in one go. With
the passage of time and repeated usage you
will automatically be able to reproduce the
symbols).
3.2.2 ATOMIC MASS
The most remarkable concept that Daltons
atomic theory proposed was that of the atomic
mass. According to him, each element had a
characteristic atomic mass. The theory could
explain the law of constant proportions so
well that scientists were prompted to measure
the atomic mass of an atom. Since
determining the mass of an individual atom
was a relatively difficult task, relative atomic
masses were determined using the laws of
chemical combinations and the compounds
formed.
Let us take the example of a compound,
carbon monoxide (CO) formed by carbon and
oxygen. It was observed experimentally that
3 g of carbon combines with 4 g of oxygen to
form CO. In other words, carbon combines
with 4/3 times its mass of oxygen. Suppose
we define the atomic mass unit (earlier
abbreviated as amu, but according to the
latest IUPAC recommendations, it is now
written as u unified mass) as equal to the
mass of one carbon atom, then we would
assign carbon an atomic mass of 1.0 u and
oxygen an atomic mass of 1.33 u. However, it
is more convenient to have these numbers
as whole numbers or as near to a whole
numbers as possible. While searching for
various atomic mass units, scientists initially
took 1/16 of the mass of an atom of naturally
occurring oxygen as the unit. This was
considered relevant due to two reasons:
oxygen reacted with a large number of
elements and formed compounds.
this atomic mass unit gave masses of
most of the elements as whole numbers.
However, in 1961 for a universally
accepted atomic mass unit, carbon-12 isotope
was chosen as the standard reference for
measuring atomic masses. One atomic mass
unit is a mass unit equal to exactly one-
twelfth (1/12
th
) the mass of one atom of
carbon-12. The relative atomic masses of all
elements have been found with respect to an
atom of carbon-12.
Imagine a fruit seller selling fruits without
any standard weight with him. He takes a
watermelon and says, this has a mass equal
to 12 units (12 watermelon units or 12 fruit
mass units). He makes twelve equal pieces of
the watermelon and finds the mass of each
fruit he is selling, relative to the mass of one
piece of the watermelon. Now he sells his
fruits by relative fruit mass unit (fmu), as in
Fig. 3.4.
Fig. 3.4 : (a) Watermelon, (b) 12 pieces, (c) 1/12 of
watermelon, (d) how the fruit seller can
weigh the fruits using pieces of watermelon
Similarly, the relative atomic mass of the
atom of an element is defined as the average
mass of the atom, as compared to 1/12
th
the
mass of one carbon-12 atom.
Table 3.2: Atomic masses of
a few elements
Element Atomic Mass (u)
Hydrogen 1
Carbon 12
Nitrogen 14
Oxygen 16
Sodium 23
Magnesium 24
Sulphur 32
Chlorine 35.5
Calcium 40
3.2.3 HOW DO ATOMS EXIST?
Atoms of most elements are not able to exist
independently. Atoms form molecules and
ions. These molecules or ions aggregate in
large numbers to form the matter that we can
see, feel or touch.
uestions
1. Define the atomic mass unit.
2. Why is it not possible to see an
atom with naked eyes?
3.3 What is a Molecule?
A molecule is in general a group of two or
more atoms that are chemically bonded
together, that is, tightly held together by
attractive forces. A molecule can be defined
as the smallest particle of an element or a
compound that is capable of an independent
existence and shows all the properties of that
substance. Atoms of the same element or of
different elements can join together to form
molecules.
Q
SCIENCE 36
3.3.1 MOLECULES OF ELEMENTS
The molecules of an element are constituted
by the same type of atoms. Molecules of many
elements, such as argon (Ar), helium (He) etc.
are made up of only one atom of that element.
But this is not the case with most of the non-
metals. For example, a molecule of oxygen
consists of two atoms of oxygen and hence it
is known as a diatomic molecule, O
2
. If 3
atoms of oxygen unite into a molecule, instead
of the usual 2, we get ozone. The number of
atoms constituting a molecule is known as
its atomicity.
Molecules of metals and some other
elements, such as carbon, do not have a
simple structure but consist of a very large
and indefinite number of atoms bonded
together.
Let us look at the atomicity of some
elements.
Table 3.3 : Atomicity of some
elements
Types of Name Atomicity
Element
Non-Metal Argon Monoatomic
Helium Monoatomic
Oxygen Diatomic
Hydrogen Diatomic
Nitrogen Diatomic
Chlorine Diatomic
Phosphorus Tetra-atomic
Sulphur Poly-atomic
Metal Sodium Monoatomic
Iron Monoatomic
Aluminium Monoatomic
Copper Monoatomic
Table 3.4 : Molecules of some
compounds
Compound Combining Ratio
Elements by
Mass
Water Hydrogen, Oxygen 1:8
Ammonia Nitrogen, Hydrogen 14:3
Carbon
Dioxide Carbon, Oxygen 3:8
Activity ______________ 3.2
Refer to Table 3.4 for ratio by mass of
atoms present in molecules and Table
3.2 for atomic masses of elements. Find
the ratio by number of the atoms of
elements in the molecules of
compounds given in Table 3.4.
The ratio by number of atoms for a
water molecule can be found as follows:
Element Ratio Atomic Mass Simplest
by mass ratio/ ratio
mass (u) atomic
mass
H 1 1
1
1
=1 2
O 8 16
8
16
=
1
2
1
Thus, the ratio by number of atoms for
water is H:O = 2:1.
3.3.3 WHAT IS AN ION?
Compounds composed of metals and non-
metals contain charged species. The charged
species are known as ions. An ion is a charged
particle and can be negatively or positively
charged. A negatively charged ion is called
an anion and the positively charged ion, a
cation. Take, for example, sodium chloride
(NaCl). Its constituent particles are positively
charged sodium ions (Na
+
) and negatively
charged chloride ions (Cl
). Ions may consist

of a single charged atom or a group of atoms
3.3.2 MOLECULES OF COMPOUNDS
Atoms of different elements join together in
definite proportions to form molecules of
compounds. Few examples are given in
Table 3.4.
that have a net charge on them. A group of
atoms carrying a charge is known as a
polyatomic ion. We shall learn more about
the formation of ions in Chapter 4.
exercise, we need to learn the symbols and
combining capacity of the elements.
The combining power (or capacity) of an
element is known as its valency. Valency can
be used to find out how the atoms of an
element will combine with the atom(s) of
another element to form a chemical
compound. The valency of the atom of an
element can be thought of as hands or arms
of that atom.
Human beings have two arms and an
octopus has eight. If one octopus has to catch
hold of a few people in such a manner that
all the eight arms of the octopus and both
arms of all the humans are locked, how many
humans do you think the octopus can hold?
Represent the octopus with O and humans
with H. Can you write a formula for this
combination? Do you get OH
4
as the formula?
The subscript 4 indicates the number of
humans held by the octopus.
The valencies of some simple and
polyatomic ions are given in Table 3.6. We
will learn more about valency in the next
chapter.
* Some elements show more than one valency. A Roman numeral shows their valency in a bracket.
Table 3.5: Some ionic compounds
Ionic Constituting Ratio
Compound Elements by
Mass
Calcium oxide Calcium and
oxygen 5:2
Magnesium Magnesium
sulphide and sulphur 3:4
Sodium Sodium
chloride and chlorine 23:35.5
3.4 Writing Chemical Formulae
The chemical formula of a compound is a
symbolic representation of its composition.
The chemical formulae of dif ferent
compounds can be written easily. For this
Table 3.6: Some common, simple and polyatomic ions
Vale- Name of Symbol Non- Symbol Polyatomic Symbol
ncy ion metallic ions
element
1. Sodium Na
+
Hydrogen H
+
Ammonium NH
4
+
Potassium K
+
Hydride H
-
Hydroxide OH
Silver Ag
+
Chloride Cl
-
Nitrate NO
3
Copper (I)* Cu
+
Bromide Br
-
Hydrogen
Iodide I
carbonate HCO
3
2. Magnesium Mg
2+
Oxide O
2-
Carbonate CO
3
2
Calcium Ca
2+
Sulphide S
2-
Sulphite SO
3
2
Zinc Zn
2+
Sulphate SO
4
2
Iron (II)* Fe
2+
Copper (II)* Cu
2+
3. Aluminium Al
3+
Nitride N
3-
Phosphate PO
4
3
Iron (III)* Fe
3+
SCIENCE 38
3. Formula of carbon tetrachloride
The formulae of ionic compounds are simply
the whole number ratio of the positive to
negative ions in the structure.
For magnesium chloride, we write the
symbol of cation (Mg
2+
) first followed by the
symbol of anion (Cl
-
). Then their charges are
criss-crossed to get the formula.
4. Formula of magnesium chloride
Formula : MgCl
2
Thus, in magnesium chloride, there are
two chloride ions (Cl
-
) for each magnesium
ion (Mg
2+
).

The positive and negative charges
must balance each other and the overall
structure must be neutral. Note that in the
formula, the charges on the ions are not
indicated.
Some more examples
(a) Formula for aluminium oxide:
Formula : Al
2
O
3
(b) Formula for calcium oxide:
Here, the valencies of the two elements
are the same. You may arrive at the formula
Ca
2
O
2
. But we simplify the formula as CaO.
The rules that you have to follow while writing
a chemical formula are as follows:
the valencies or charges on the ion must
balance.
when a compound consists of a metal
and a non-metal, the name or symbol of
the metal is written first. For example:
calcium oxide (CaO), sodium chloride
(NaCl), iron sulphide (FeS), copper oxide
(CuO) etc., where oxygen, chlorine,
sulphur are non-metals and are written
on the right, whereas calcium, sodium,
iron and copper are metals, and are
written on the left.
in compounds formed with polyatomic
ions, the ion is enclosed in a bracket
before writing the number to indicate the
ratio.
3.4.1 FORMULAE OF SIMPLE COMPOUNDS
The simplest compounds, which are made up
of two different elements are called binary
compounds. Valencies of some ions are given
in Table 3.6. You can use these to write
formulae for compounds.
While writing the chemical formulae for
compounds, we write the constituent
elements and their valencies as shown below.
Then we must crossover the valencies of the
combining atoms.
Examples
1. Formula of hydrogen chloride
Formula of the compound would be HCl.
2. Formula of hydrogen sulphide
following formulae:
(i) Al
2
(SO
4
)
3
(ii) CaCl
2
(iii) K
2
SO
4
(iv) KNO
3
(v) CaCO
3
.
3. What is meant by the term
chemical formula?
4. How many atoms are present in a
(i) H
2
S molecule and
(ii) PO
4
3
ion?
3.5 Molecular Mass and Mole
Concept
3.5.1 MOLECULAR MASS
In section 3.2.2 we discussed the concept of
atomic mass. This concept can be extended
to calculate molecular masses. The molecular
mass of a substance is the sum of the atomic
masses of all the atoms in a molecule of the
substance. It is therefore the relative mass of
a molecule expressed in atomic mass units (u).
Example 3.1 (a) Calculate the relative
molecular mass of water (H
2
O).
(b) Calculate the molecular mass of
HNO
3
.
Solution:
(a) Atomic mass of hydrogen = 1u,
oxygen = 16 u
So the molecular mass of water, which
contains two atoms of hydrogen and
one atom of oxygen is = 2 1+ 116
= 18 u
(b) The molecular mass of HNO
3
= the
atomic mass of H + the atomic mass of
N+ 3 the atomic mass of O
= 1 + 14 + 48 = 63 u
3.5.2 FORMULA UNIT MASS
The formula unit mass of a substance is a
sum of the atomic masses of all atoms in a
formula unit of a compound. Formula unit
mass is calculated in the same manner as
we calculate the molecular mass. The only
(c) Formula of sodium nitrate:
Formula : NaNO
3
(d) Formula of calcium hydroxide:
Formula : Ca(OH)
2
Note that the formula of calcium
hydroxide is Ca(OH)
2
and not CaOH
2
. We use
brackets when we have two or more of the
same ions in the formula. Here, the bracket
around OH with a subscript 2 indicates that
there are two hydroxyl (OH) groups joined to
one calcium atom. In other words, there are
two atoms each of oxygen and hydrogen in
calcium hydroxide.
(e) Formula of sodium carbonate:
Formula : Na
2
CO
3
In the above example, brackets are not
needed if there is only one ion present.
(f) Formula of ammonium sulphate:
Formula : (NH
4
)
2
SO
4
uestions
1. Write down the formulae of
(i) sodium oxide
(ii) aluminium chloride
(iii) sodium suphide
(iv) magnesium hydroxide
2. Write down the names of
compounds represented by the
Q
SCIENCE 40
difference is that we use the word formula
unit for those substances whose constituent
particles are ions. For example, sodium
chloride as discussed above, has a formula
unit NaCl. Its formula unit mass can be
calculated as
1 23 + 1 35.5 = 58.5 u
Example 3.2 Calculate the formula unit
mass of CaCl
2
.
Solution:
Atomic mass of Ca
+ (2 atomic mass of Cl)
= 40 + 2 35.5 = 40 + 71 = 111 u
uestions
1. Calculate the molecular masses
of H
2
, O
2
, Cl
2
, CO
2
, CH
4
, C
2
H
6
,
C
2
H
4
, NH
3
, CH
3
OH.
2. Calculate the formula unit
masses of ZnO, Na
2
O, K
2
CO
3
,
given atomic masses of Zn = 65 u,
Na = 23 u, K = 39 u, C = 12 u,
and O = 16 u.
3.5.3 MOLE CONCEPT
Take an example of the reaction of hydrogen
and oxygen to form water:
2H
2
+ O
2
2H
2
O.
The above reaction indicates that
(i) two molecules of hydrogen combine
with one molecule of oxygen to form
two molecules of water, or
(ii) 4 u of hydrogen molecules combine
with 32 u of oxygen molecules to form
36 u of water molecules.
We can infer from the above equation that
the quantity of a substance can be
characterised by its mass or the number of
molecules. But, a chemical reaction equation
indicates directly the number of atoms or
molecules taking part in the reaction.
Therefore, it is more convenient to refer to
the quantity of a substance in terms of the
number of its molecules or atoms, rather than
their masses. So, a new unit mole was
introduced. One mole of any species (atoms,
Q
Fig. 3.5: Relationship between mole, Avogadro number and mass
molecules, ions or particles) is that quantity
in number having a mass equal to its atomic
or molecular mass in grams.
The number of particles (atoms, molecules
or ions) present in 1 mole of any substance
is fixed, with a value of 6.022 10
23
. This is
an experimentally obtained value. This
number is called the Avogadro Constant or
Avogadro Number (represented by N
0
),

named
in honour of the Italian scientist,
Amedeo Avogadro.
1 mole (of anything) = 6.022 10
23
in number,
as, 1 dozen = 12 nos.
1 gross = 144 nos.
Besides being related to a number, a mole
has one more advantage over a dozen or a
gross. This advantage is that mass of 1 mole
of a particular substance is also fixed.
The mass of 1 mole of a substance is equal
to its relative atomic or molecular mass in
grams. The atomic mass of an element gives
us the mass of one atom of that element in
atomic mass units (u). To get the mass of
1 mole of atom of that element, that is, molar
mass, we have to take the same numerical
value but change the units from u to g.
Molar mass of atoms is also known as gram
atomic mass. For example, atomic mass of
hydrogen=1u. So, gram atomic mass of
hydrogen = 1 g.
1 u hydrogen has only 1 atom of hydrogen
1 g hydrogen has 1 mole atoms, that is,
6.022 10
23
atoms of hydrogen.
Similarly,
16 u oxygen has only 1 atom of oxygen,
16 g oxygen has 1 mole atoms, that is,
6.022 10
23
atoms of oxygen.
To find the gram molecular mass or molar
mass of a molecule, we keep the numerical
value the same as the molecular mass, but
simply change units as above from u to g.
For example, as we have already calculated,
molecular mass of water (H
2
O) is 18 u. From
here we understand that
18 u water has only 1 molecule of water,
18 g water has 1 mole molecules of water,
that is, 6.022 10
23
molecules of water.
Chemists need the number of atoms and
molecules while carrying out reactions, and
for this they need to relate the mass in grams
to the number. It is done as follows:
1 mole = 6.022 10
23
number
= Relative mass in grams.
Thus, a mole is the chemists counting unit.
The word mole was introduced around
1896 by Wilhelm Ostwald who derived the
term from the Latin word moles meaning a
heap or pile. A substance may be considered
as a heap of atoms or molecules. The unit
mole was accepted in 1967 to provide a simple
way of reporting a large number the massive
heap of atoms and molecules in a sample.
Example 3.3
1. Calculate the number of moles for the
following:
(i) 52 g of He (finding mole from
mass)
(ii) 12.044 10
23
number of He atoms
(finding mole from number of
particles).
Solutions:
No. of moles = n
Given mass = m
Molar mass = M
Given number of particles = N
Avogadro number of particles = N
0
(i) Atomic mass of He = 4 u
Molar mass of He = 4g
Thus, the number of moles
=
givenmass
molar mass
m 52
n 13
M 4
= = =
(ii) we know,
1 mole = 6.022 10
23
The number of moles
givennumber of particles
Avogadronumber
=

23
23
o
12.044 10 N
n 2
N 6.022 10
= = =
SCIENCE 42
Example 3.4 Calculate the mass of the
following:
(i) 0.5 mole of N
2
gas (mass from mole
of molecule)
(ii) 0.5 mole of N atoms (mass from
mole of atom)
(iii) 3.011 10
23
number of N atoms
(mass from number)
(iv) 6.022 10
23
number of N
2
molecules (mass from number)
Solutions:
(i) mass = molar mass number of
moles
m M n 28 0.5 14g = = =
(ii) mass = molar mass number of
moles
m = M n = 14 0.5 = 7 g
(iii) The number of moles, n
0
givennumber of particles N
Avogadro number N
= =

23
23
3.011 10
6.022 10

23
23
3.011 10
m M n 14
6.022 10
= =
14 0.5 7g = =
(iv)
0
N
n
N
=
23
23
0
6.022 10 N
m M 28
N 6.022 10
= =
28 1 28 g = =
Example 3.5 Calculate the number of
particles in each of the
following:
(i) 46 g of Na atoms (number from
mass)
(ii) 8 g O
2
molecules (number of
molecules from mass)
(iii) 0.1 mole of carbon atoms (number
from given moles)
Solutions:
(i) The number of atoms
givenmass
Avogadro number
molar mass
=
0
m
N N
M
=
23
23
46
N 6.022 10
23
N 12.044 10
=
=
(ii) The number of molecules
0
givenmass
Avogadro number
molar mass
m
N N
M
atomic massof oxygen 16 u
=
=
=
molar mass of O
2
molecules
= 16 2 = 32g
23
23
23
8
N 6.022 10
32
N 1.5055 10
1.51 10
=
=
;
(iii) The number of particles (atom) =
number of moles of particles
Avogadro number
N = n N
0
= 0.1 x 6.022 10
23
= 6.022 10
22
uestions
1. If one mole of carbon atoms
weighs 12 gram, what is the
mass (in gram) of 1 atom of
carbon?
2. Which has more number of
atoms, 100 grams of sodium or
100 grams of iron (given, atomic
mass of Na = 23 u, Fe = 56 u)?
Q
What
you have
learnt
During a chemical reaction, the sum of the masses of the
reactants and products remains unchanged. This is known
as the Law of Conservation of Mass.
In a pure chemical compound, elements are always present in
a definite proportion by mass. This is known as the Law of
Definite Proportions.
An atom is the smallest particle of the element that can exist
independently and retain all its chemical properties.
A molecule is the smallest particle of an element or a compound
capable of independent existence under ordinary conditions.
It shows all the properties of the substance.
A chemical formula of a compound shows its constituent
elements and the number of atoms of each combining element.
Clusters of atoms that act as an ion are called polyatomic ions.
They carry a fixed charge on them.
The chemical formula of a molecular compound is determined
by the valency of each element.
In ionic compounds, the charge on each ion is used to determine
the chemical formula of the compound.
Scientists use the relative atomic mass scale to compare the
masses of different atoms of elements. Atoms of carbon-12
isotopes are assigned a relative atomic mass of 12 and the
relative masses of all other atoms are obtained by comparison
with the mass of a carbon-12 atom.
The Avogadro constant 6.022 10
23
is defined as the number
of atoms in exactly 12 g of carbon-12.
The mole is the amount of substance that contains the same
number of particles (atoms/ ions/ molecules/ formula units
etc.) as there are atoms in exactly 12 g of carbon-12.
Mass of 1 mole of a substance is called its molar mass.
Exercises
1. A 0.24 g sample of compound of oxygen and boron was found
by analysis to contain 0.096 g of boron and 0.144 g of oxygen.
Calculate the percentage composition of the compound by
weight.
2. When 3.0 g of carbon is burnt in 8.00 g oxygen, 11.00 g of
carbon dioxide is produced. What mass of carbon dioxide will
SCIENCE 44
be formed when 3.00 g of carbon is burnt in 50.00 g of oxygen?
Which law of chemical combination will govern your answer?
3. What are polyatomic ions? Give examples.
4. Write the chemical formulae of the following.
(a) Magnesium chloride
(b) Calcium oxide
(c) Copper nitrate
(d) Aluminium chloride
(e) Calcium carbonate.
5. Give the names of the elements present in the following
compounds.
(a) Quick lime
(b) Hydrogen bromide
(c) Baking powder
(d) Potassium sulphate.
6. Calculate the molar mass of the following substances.
(a) Ethyne, C
2
H
2
(b) Sulphur molecule,

S
8
(c) Phosphorus molecule, P
4
(Atomic mass of phosphorus
= 31)
(d) Hydrochloric acid, HCl
(e) Nitric acid, HNO
3
7. What is the mass of
(a) 1 mole of nitrogen atoms?
(b) 4 moles of aluminium atoms (Atomic mass of aluminium
= 27)?
(c) 10 moles of sodium sulphite (Na
2
SO
3
)?
8. Convert into mole.
(a) 12 g of oxygen gas
(b) 20 g of water
(c) 22 g of carbon dioxide.
9. What is the mass of:
(a) 0.2 mole of oxygen atoms?
(b) 0.5 mole of water molecules?
10. Calculate the number of molecules of sulphur (S
8
) present in
16 g of solid sulphur.
11. Calculate the number of aluminium ions present in 0.051 g of
aluminium oxide.
(Hint: The mass of an ion is the same as that of an atom of the
same element. Atomic mass of Al = 27 u)
Group Activity
Play a game for writing formulae.
Example1 : Make placards with symbols and valencies of the
elements separately. Each student should hold two
placards, one with the symbol in the right hand and
the other with the valency in the left hand. Keeping
the symbols in place, students should criss-cross their
valencies to form the formula of a compound.
Example 2 : A low cost model for writing formulae: Take empty
blister packs of medicines. Cut them in groups,
according to the valency of the element, as shown in
the figure. Now, you can make formulae by fixing one
type of ion into other.
For example:
Na
+
SO
4
2-
P0
4
3-
Formula for sodium sulphate:
2 sodium ions can be fixed on one sulphate ion.
Hence, the formula will be: Na
2
SO
4
Do it yourself :
Now, write the formula of sodium phosphate.
In Chapter 3, we have learnt that atoms and
molecules are the fundamental building
blocks of matter. The existence of different
kinds of matter is due to different atoms
constituting them. Now the questions arise:
(i) What makes the atom of one element
different from the atom of another element?
and (ii) Are atoms really indivisible, as
proposed by Dalton, or are there smaller
constituents inside the atom? We shall find
out the answers to these questions in this
chapter. We will learn about sub-atomic
particles and the various models that have
been proposed to explain how these particles
are arranged within the atom.
A major challenge before the scientists at
the end of the 19th century was to reveal the
structure of the atom as well as to explain its
important properties. The elucidation of the
structure of atoms is based on a series of
experiments.
One of the first indications that atoms are
not indivisible, comes from studying static
electricity and the condition under which
electricity is conducted by dif ferent
substances.
4.1 Charged Particles in Matter
For understanding the nature of charged
particles in matter, let us carry out the
following activities:
Activity ______________ 4.1
A. Comb dry hair. Does the comb then
attract small pieces of paper?
B. Rub a glass rod with a silk cloth and
bring the rod near an inflated balloon.
Observe what happens.
From these activities, can we conclude
that on rubbing two objects together, they
become electrically charged? Where does this
charge come from? This question can be
answered by knowing that an atom is divisible
and consists of charged particles.
Many scientists contributed in revealing
the presence of charged particles in an atom.
It was known by 1900 that the atom was
not a simple, indivisible particle but contained
at least one sub-atomic particle the electron
identified by J.J. Thomson. Even before the
electron was identified, E. Goldstein in 1886
discovered the presence of new radiations in
a gas discharge and called them canal rays.
These rays were positively charged radiations
which ultimately led to the discovery of
another sub-atomic particle. This sub-atomic
particle had a charge, equal in magnitude but
opposite in sign to that of the electron. Its
mass was approximately 2000 times as that
of the electron. It was given the name of
proton. In general, an electron is represented
as e
and a proton as p
+
. The mass of a proton
is taken as one unit and its charge as plus
one. The mass of an electron is considered to
be negligible and its charge is minus one.
It seemed highly likely that an atom was
composed of protons and electrons, mutually
balancing their charges. It also appeared that
the protons were in the interior of the atom,
for whereas electrons could easily be peeled
off but not protons. Now the big question was:
what sort of structure did these particles of
the atom form? We will find the answer to
this question below.
4 4
4 44
S S
S SSTRUCTURE TRUCTURE TRUCTURE TRUCTURE TRUCTURE
OF OF OF OF OF
THE THE THE THE THE A A
A AATOM TOM TOM TOM TOM
Chapter
uestions
1. What are canal rays?
2. If an atom contains one electron
and one proton, will it carry any
charge or not?
4.2 The Structure of an Atom
We have learnt Daltons atomic theory in
Chapter 3, which suggested that the atom
was indivisible and indestructible. But the
discovery of two fundamental particles
(electrons and protons) inside the atom, led
to the failure of this aspect of Daltons atomic
theory. It was then considered necessary to
know how electrons and protons are arranged
within an atom. For explaining this, many
scientists proposed various atomic models.
J.J. Thomson was the first one to propose a
model for the structure of an atom.
4.2.1 THOMSONS MODEL OF AN ATOM
Thomson proposed the model of an atom to
be similar to that of a Christmas pudding.
The electrons, in a sphere of positive charge,
were like currants (dry fruits) in a spherical
Christmas pudding. We can also think of a
watermelon, the positive charge in the atom
is spread all over like the red edible part of
the watermelon, while the electrons are
studded in the positively charged sphere, like
the seeds in the watermelon (Fig. 4.1).
Thomson proposed that:
(i) An atom consists of a positively
charged sphere and the electrons are
embedded in it.
(ii) The negative and positive charges are
equal in magnitude. So, the atom as a
whole is electrically neutral.
Although Thomsons model explained that
atoms are electrically neutral, the results of
experiments carried out by other scientists
could not be explained by this model, as we
will see below.
4.2.2 RUTHERFORDS MODEL OF AN ATOM
Ernest Rutherford was interested in knowing
how the electrons are arranged within an
atom. Rutherford designed an experiment for
this. In this experiment, fast moving alpha
()-particles were made to fall on a thin
gold foil.
He selected a gold foil because he wanted
as thin a layer as possible. This gold foil
was about 1000 atoms thick.
-particles are doubly-charged helium
ions. Since they have a mass of 4 u, the
fast-moving -particles have a
considerable amount of energy.
It was expected that -particles would be
deflected by the sub-atomic particles in
the gold atoms. Since the -particles were
much heavier than the protons, he did
not expect to see large deflections.
Q
Fig.4.1: Thomsons model of an atom
J.J. Thomson (1856-
1940), a British
physicist, was born in
Cheetham Hill, a suburb
of Manchester, on
18 December 1856. He
was awarded the Nobel
prize in Physics in 1906
for his work on the
discovery of electrons.
He directed the Cavendish Laboratory at
Cambridge for 35 years and seven of his
research assistants subsequently won
Nobel prizes.
STRUCTURE OF THE ATOM 47
SCIENCE 48
Fig. 4.2: Scattering of -particles by a gold foil
But, the -particle scattering experiment
gave totally unexpected results (Fig. 4.2). The
following observations were made:
(i) Most of the fast moving -particles
passed straight through the gold foil.
(ii) Some of the -particles were deflected
by the foil by small angles.
(iii) Surprisingly one out of every 12000
particles appeared to rebound.
In the words of Rutherford, This result
was almost as incredible as if you fire a
15-inch shell at a piece of tissue paper and it
comes back and hits you.
hear a sound when each stone strikes the
wall. If he repeats this ten times, he will hear
the sound ten times. But if a blind-folded
child were to throw stones at a barbed-wire
fence, most of the stones would not hit the
fencing and no sound would be heard. This
is because there are lots of gaps in the fence
which allow the stone to pass through them.
Following a similar reasoning, Rutherford
concluded from the -particle scattering
experiment that
(i) Most of the space inside the atom is
empty because most of the -particles
passed through the gold foil without
getting deflected.
(ii) Very few particles were deflected from
their path, indicating that the positive
charge of the atom occupies very little
space.
(iii) A very small fraction of -particles
were deflected by 180
0
,

indicating that
all the positive charge and mass of the
gold atom were concentrated in a very
small volume within the atom.
From the data he also calculated that the
radius of the nucleus is about 10
5
times less
than the radius of the atom.
On the basis of his experiment,
Rutherford put forward the nuclear model of
an atom, which had the following features:
(i) There is a positively charged centre in
an atom called the nucleus. Nearly all
the mass of an atom resides in the
nucleus.
(ii) The electrons revolve around the
nucleus in well-defined orbits.
(iii) The size of the nucleus is very small
as compared to the size of the atom.
Drawbacks of Rutherfords model of
the atom
The orbital revolution of the electron is not
expected to be stable. Any particle in a
circular orbit would undergo acceleration.
During acceleration, charged particles would
radiate energy. Thus, the revolving electron
would lose energy and finally fall into the
nucleus. If this were so, the atom should be
highly unstable and hence matter would not
exist in the form that we know. We know that
atoms are quite stable.
E. Rutherford (1871-1937)
was born at Spring Grove
on 30 August 1871. He was
known as the Father of
nuclear physics. He is
famous for his work on
radioactivity and the
discovery of the nucleus of an atom with
the gold foil experiment. He got the Nobel
prize in chemistry in 1908.
Let us think of an activity in an open field
to understand the implications of this
experiment. Let a child stand in front of a
wall with his eyes closed. Let him throw
stones at the wall from a distance. He will
4.2.3 BOHRS MODEL OF ATOM
In order to overcome the objections raised
against Rutherfords model of the atom,
Neils Bohr put forward the following
postulates about the model of an atom:
(i) Only certain special orbits known as
discrete orbits of electrons, are allowed
inside the atom.
(ii) While revolving in discrete orbits the
electrons do not radiate energy.
uestions
1. On the basis of Thomsons model
of an atom, explain how the atom
is neutral as a whole.
2. On the basis of Rutherfords
model of an atom, which sub-
atomic particle is present in the
nucleus of an atom?
3. Draw a sketch of Bohrs model
of an atom with three shells.
4. What do you think would be the
observation if the -particle
scattering experiment is carried
out using a foil of a metal other
than gold?
4.2.4 NEUTRONS
In 1932, J. Chadwick discovered another sub-
atomic particle which had no charge and a
mass nearly equal to that of a proton. It was
eventually named as neutron. Neutrons are
present in the nucleus of all atoms, except
hydrogen. In general, a neutron is
represented as n. The mass of an atom is
therefore given by the sum of the masses of
protons and neutrons present in the nucleus.
uestions
1. Name the three sub-atomic
particles of an atom.
2. Helium atom has an atomic mass
of 4 u and two protons in its
nucleus. How many neutrons
does it have?
4.3 How are Electrons Distributed
in Different Orbits (Shells)?
The distribution of electrons into different
orbits of an atom was suggested by Bohr and
Bury.
The following rules are followed for writing
the number of electrons in different energy
levels or shells:
(i) The maximum number of electrons
present in a shell is given by the
Neils Bohr (1885-1962)
was born in Copenhagen
on 7 October 1885. He was
appointed professor of
physics at Copenhagen
University in 1916. He got
the Nobel prize for his work
on the structure of atom in
1922. Among Professor
Bohrs numerous writings, three appearing
as books are:
(i) The Theory of Spectra and Atomic
Constitution, (ii) Atomic Theory and,
(iii) The Description of Nature.
These orbits or shells are called energy
levels. Energy levels in an atom are shown in
Fig. 4.3.
Q
Fig. 4.3: A few energy levels in an atom
These orbits or shells are represented by
the letters K,L,M,N, or the numbers,
n=1,2,3,4,.
Q
SCIENCE 50
formula 2n
2
,

where n is the orbit
number or energy level index, 1,2,3,.
Hence the maximum number of
electrons in different shells are as
follows:
first orbit or K-shell will be = 2 1
2
= 2,
second orbit or L-shell will be = 2 2
2
= 8, third orbit or M-shell will be = 2
3
2
= 18, fourth orbit or N-shell will be
= 2 4
2
= 32, and so on.
(ii) The maximum number of electrons
that can be accommodated in the
outermost orbit is 8.
(iii) Electrons are not accommodated in a
given shell, unless the inner shells are
filled. That is, the shells are filled in a
step-wise manner.
Atomic structure of the first eighteen
elements is shown schematically in Fig. 4.4.
The composition of atoms of the first
eighteen elements is given in Table 4.1.
uestions
1. Write the distribution of electrons
in carbon and sodium atoms.
2. If K and L shells of an atom are
full, then what would be the total
number of electrons in the atom?
4.4 Valency
We have learnt how the electrons in an atom
are arranged in different shells/orbits. The
electrons present in the outermost shell of
an atom are known as the valence electrons.
From the Bohr-Bury scheme, we also
know that the outermost shell of an atom can
Activity ______________ 4.2
Make a static atomic model displaying
electronic configuration of the first
eighteen elements.
Fig.4.4: Schematic atomic structure of the first eighteen elements
Q
accommodate a maximum of 8 electrons. It
was observed that the atoms of elements,
having a completely filled outermost shell
show little chemical activity. In other words,
their combining capacity or valency is zero.
Of these inert elements, the helium atom has
Table 4.1: Composition of Atoms of the First Eighteen Elements
with Electron Distribution in Various Shells
two electrons in its outermost shell and all
other elements have atoms with eight
electrons in the outermost shell.
The combining capacity of the atoms of
other elements, that is, their tendency to react
and form molecules with atoms of the same
or different elements, was thus explained as
an attempt to attain a fully-filled outermost
shell. An outermost-shell, which had eight
electrons was said to possess an octet. Atoms
would thus react, so as to achieve an octet in
the outermost shell. This was done by
sharing, gaining or losing electrons. The
number of electrons gained, lost or shared
so as to make the octet of electrons in the
outermost shell, gives us directly the
combining capacity of the element, that is,
the valency discussed in the previous chapter.
For example, hydrogen/lithium/sodium
atoms contain one electron each in their
outermost shell, therefore each one of them
can lose one electron. So, they are said to
have valency of one. Can you tell, what is
valency of magnesium and aluminium? It is
two and three, respectively, because
magnesium has two electrons in its outermost
shell and aluminium has three electrons in
its outermost shell.
If the number of electrons in the
outermost shell of an atom is close to its full
capacity, then valency is determined in a
different way. For example, the fluorine atom
has 7 electrons in the outermost shell, and
its valency could be 7. But it is easier for
Name of Symbol Atomic Number Number Number Vale-
Element Number of of of ncy
Protons Neutrons Electrons K L M N
Hydrogen H 1 1 - 1 1 - - - 1
Helium He 2 2 2 2 2 - - - 0
Lithium Li 3 3 4 3 2 1 - - 1
Beryllium Be 4 4 5 4 2 2 - - 2
Boron B 5 5 6 5 2 3 - - 3
Carbon C 6 6 6 6 2 4 - - 4
Nitrogen N 7 7 7 7 2 5 - - 3
Oxygen O 8 8 8 8 2 6 - - 2
Fluorine F 9 9 10 9 2 7 - - 1
Neon Ne 10 10 10 10 2 8 - - 0
Sodium Na 11 11 12 11 2 8 1 - 1
Magnesium Mg 12 12 12 12 2 8 2 - 2
Aluminium Al 13 13 14 13 2 8 3 - 3
Silicon Si 14 14 14 14 2 8 4 - 4
Phosphorus P 15 15 16 15 2 8 5 - 3,5
Sulphur S 16 16 16 16 2 8 6 - 2
Chlorine Cl 17 17 18 17 2 8 7 - 1
Argon Ar 18 18 22 18 2 8 8 0
Distribution of
Electrons
SCIENCE 52
fluorine to gain one electron instead of losing
seven electrons. Hence, its valency is
determined by subtracting seven electrons
from the octet and this gives you a valency of
one for fluorine. Valency can be calculated in
a similar manner for oxygen. What is the
valency of oxygen that you get from this
calculation?
Therefore, an atom of each element has a
definite combining capacity, called its valency.
Valency of the first eighteen elements is given
in the last column of Table 4.1.
uestion
1. How will you find the valency
of chlorine, sulphur and
magnesium?
4.5 Atomic Number and Mass
Number
4.5.1 ATOMIC NUMBER
We know that protons are present in the
nucleus of an atom. It is the number of
protons of an atom, which determines its
atomic number. It is denoted by Z. All atoms
of an element have the same atomic number,
Z. In fact, elements are defined by the number
of protons they possess. For hydrogen, Z = 1,
because in hydrogen atom, only one proton
is present in the nucleus. Similarly, for
carbon, Z = 6. Therefore, the atomic number
is defined as the total number of protons
present in the nucleus of an atom.
4.5.2 MASS NUMBER
After studying the properties of the sub-
atomic particles of an atom, we can conclude
that mass of an atom is practically due to
protons and neutrons alone. These are
present in the nucleus of an atom. Hence
protons and neutrons are also called
nucleons. Therefore, the mass of an atom
resides in its nucleus. For example, mass of
carbon is 12 u because it has 6 protons and
6 neutrons, 6 u + 6 u = 12 u. Similarly, the
mass of aluminium is 27 u (13 protons+14
neutrons). The mass number is defined as
the sum of the total number of protons and
neutrons present in the nucleus of an atom.
In the notation for an atom, the atomic
number, mass number and symbol of the
element are to be written as:
Mass Number
Q
Symbol of
element
Atomic Number
For example, nitrogen is written as
14
7
N .
uestions
1. If number of electrons in an atom
is 8 and number of protons is also
8, then (i) what is the atomic
number of the atom? and (ii) what
is the charge on the atom?
2. With the help of Table 4.1, find
out the mass number of oxygen
and sulphur atom.
4.6 Isotopes
In nature, a number of atoms of some
elements have been identified, which have the
same atomic number but different mass
numbers. For example, take the case of
hydrogen atom, it has three atomic species,
namely protium (
1
1
H), deuterium (
2
1
H or D)
and tritium (
3
1
H or T). The atomic number of
each one is 1, but the mass number is 1, 2
and 3, respectively. Other such examples are
(i) carbon,
12
6
C and
14
6
C, (ii) chlorine,
35
17
Cl
and
37
17
Cl, etc.
On the basis of these examples, isotopes
are defined as the atoms of the same element,
having the same atomic number but different
mass numbers. Therefore, we can say that
there are three isotopes of hydrogen atom,
namely protium, deuterium and tritium.
Q
Q
Many elements consist of a mixture of
isotopes. Each isotope of an element is a pure
substance. The chemical properties of
isotopes are similar but their physical
properties are different.
Chlorine occurs in nature in two isotopic
forms, with masses 35 u and 37 u in the ratio
of 3:1. Obviously, the question arises: what
should we take as the mass of chlorine atom?
Let us find out.
The mass of an atom of any natural
element is taken as the average mass of all
the naturally occuring atoms of that element.
If an element has no isotopes, then the mass
of its atom would be the same as the sum of
protons and neutrons in it. But if an element
occurs in isotopic forms, then we have to
know the percentage of each isotopic form
and then the average mass is calculated.
The average atomic mass of chlorine atom,
on the basis of above data, will be
75 25
35 37
100 100
+

105 37 142
35.5u
4 4 4
+ = =

=

This does not mean that any one atom of
chlorine has a fractional mass of 35.5 u. It
means that if you take a certain amount of
chlorine, it will contain both isotopes of
chlorine and the average mass is 35.5 u.
Applications
Since the chemical properties of all the
isotopes of an element are the same,
normally we are not concerned about
taking a mixture. But some isotopes have
special properties which find them useful
in various fields. Some of them are :
(i) An isotope of uranium is used as a fuel
in nuclear reactors.
(ii) An isotope of cobalt is used in the
treatment of cancer.
(iii) An isotope of iodine is used in the
treatment of goitre.
4.6.1 ISOBARS
Let us consider two elements calcium,
atomic number 20, and argon, atomic
number 18. The number of electrons in these
atoms is different, but the mass number of
both these elements is 40. That is, the total
number of nucleons is the same in the atoms
of this pair of elements. Atoms of different
elements with different atomic numbers,
which have the same mass number, are
known as isobars.
uestions
1. For the symbol H,D and T
tabulate three sub-atomic
particles found in each of them.
2. Write the electronic configuration
of any one pair of isotopes and
isobars.
What
you have
learnt
Credit for the discovery of electron and proton goes to J.J.
Thomson and E.Goldstein, respectively.
J.J. Thomson proposed that electrons are embedded in a
positive sphere.
SCIENCE 54
Rutherfords alpha-particle scattering experiment led to the
discovery of the atomic nucleus.
Rutherfords model of the atom proposed that a very tiny
nucleus is present inside the atom and electrons revolve around
this nucleus. The stability of the atom could not be explained
by this model.
Neils Bohrs model of the atom was more successful. He
proposed that electrons are distributed in different shells with
discrete energy around the nucleus. If the atomic shells are
complete, then the atom will be stable and less reactive.
J. Chadwick discovered presence of neutrons in the nucleus of
an atom. So, the three sub-atomic particles of an atom are:
(i) electrons, (ii) protons and (iii) neutrons. Electrons are
negatively charged, protons are positively charged and neutrons
have no charges. The mass of an electron is about
1
2000
times
the mass of an hydrogen atom. The mass of a proton and a
neutron is taken as one unit each.
Shells of an atom are designated as K,L,M,N,.
Valency is the combining capacity of an atom.
The atomic number of an element is the same as the number
of protons in the nucleus of its atom.
The mass number of an atom is equal to the number of nucleons
in its nucleus.
Isotopes are atoms of the same element, which have different
mass numbers.
Isobars are atoms having the same mass number but different
atomic numbers.
Elements are defined by the number of protons they possess.
Exercises
1. Compare the properties of electrons, protons and neutrons.
2. What are the limitations of J.J. Thomsons model of the atom?
3. What are the limitations of Rutherfords model of the atom?
4. Describe Bohrs model of the atom.
5. Compare all the proposed models of an atom given in this
chapter.
6. Summarise the rules for writing of distribution of electrons in
various shells for the first eighteen elements.
7. Define valency by taking examples of silicon and oxygen.
8. Explain with examples (i) Atomic number, (ii) Mass number,
(iii) Isotopes and iv) Isobars. Give any two uses of isotopes.
9. Na
+
has completely filled K and L shells. Explain.
10. If bromine atom is available in the form of, say, two isotopes
79
35
Br (49.7%) and
81
35
Br (50.3%), calculate the average atomic
mass of bromine atom.
11. The average atomic mass of a sample of an element X is 16.2 u.
What are the percentages of isotopes
16
8
X and
18
8
X in the
sample?
12. If Z = 3, what would be the valency of the element? Also, name
the element.
13. Composition of the nuclei of two atomic species X and Y are
given as under
X Y
Protons = 6 6
Neutrons = 6 8
Give the mass numbers of X and Y. What is the relation between
the two species?
14. For the following statements, write T for True and F for False.
(a) J.J. Thomson proposed that the nucleus of an atom
contains only nucleons.
(b) A neutron is formed by an electron and a proton
combining together. Therefore, it is neutral.
(c) The mass of an electron is about
1
2000
times that of proton.
(d) An isotope of iodine is used for making tincture iodine,
which is used as a medicine.
Put tick () against correct choice and cross () against
wrong choice in questions 15, 16 and 17
15. Rutherfords alpha-particle scattering experiment was
responsible for the discovery of
(a) Atomic Nucleus (b) Electron
(c) Proton (d) Neutron
16. Isotopes of an element have
(a) the same physical properties
(b) different chemical properties
(c) different number of neutrons
(d) different atomic numbers.
17. Number of valence electrons in Cl
ion are:
(a) 16 (b) 8 (c) 17 (d) 18
SCIENCE 56
18. Which one of the following is a correct electronic configuration
of sodium?
(a) 2,8 (b) 8,2,1 (c) 2,1,8 (d) 2,8,1.
19. Complete the following table.
Atomic Mass Number Number Number Name of
Number Number of of of the Atomic
Neutrons Protons Electrons Species
9 - 10 - - -
16 32 - - - Sulphur
- 24 - 12 - -
- 2 - 1 - -
- 1 0 1 0 -
While examining a thin slice of cork, Robert
Hooke saw that the cork resembled the
structure of a honeycomb consisting of many
little compartments. Cork is a substance
which comes from the bark of a tree. This
was in the year 1665 when Hooke made this
chance observation through a self-designed
microscope. Robert Hooke called these boxes
cells. Cell is a Latin word for a little room.
This may seem to be a very small and
insignificant incident but it is very important
in the history of science. This was the very
first time that someone had observed that
living things appear to consist of separate
units. The use of the word cell to describe
these units is used till this day in biology.
Let us find out about cells.
5.1 What are Living Organisms
Made Up of ?
Activity ______________ 5.1
Let us take a small piece from an onion
bulb. With the help of a pair of forceps,
we can peel of f the skin (called
epidermis) from the concave side (inner
layer) of the onion. This layer can be
put immediately in a watch-glass
containing water. This will prevent the
peel from getting folded or getting dry.
What do we do with this peel?
Let us take a glass slide, put a drop of
water on it and transfer a small piece
of the peel from the watch glass to the
slide. Make sure that the peel is
perfectly flat on the slide. A thin camel
hair paintbrush might be necessary to
help transfer the peel. Now we put a
drop of iodine solution on this piece
followed by a cover slip. Take care to
avoid air bubbles while putting the
cover slip with the help of a mounting
needle. Ask your teacher for help. We
have prepared a temporary mount of
onion peel. We can observe this slide
under low power followed by high
powers of a compound microscope.
Fig. 5.1: Compound microscope
What do we observe as we look through
the lens? Can we draw the structures that
we are able to see through the microscope,
on an observation sheet? Does it look like
Fig. 5.2?
Eyepiece
Coarse adjustment
Fine adjustment
Arm
Objective lens
Stage
Swivel
Mirror
Base
Body tube
Clip
Microscope slide
Condenser
Fig. 5.2: Cells of an onion peel
5 5
5 55
T T
T TTHE HE HE HE HE F F
F FFUNDAMENTAL UNDAMENTAL UNDAMENTAL UNDAMENTAL UNDAMENTAL U U
U UUNIT NIT NIT NIT NIT
OF OF OF OF OF L L
L LLIFE IFE IFE IFE IFE
Chapter
SCIENCE 58
Chlamydomonas, Paramoecium and bacteria.
These organisms are called unicellular
organisms (uni = single). On the other hand,
many cells group together in a single body
and assume different functions in it to form
various body parts in multicellular organisms
(multi = many) such as some fungi, plants
and animals. Can we find out names of some
more unicellular organisms?
Every multi-cellular organism has come
from a single cell. How? Cells divide to
produce cells of their own kind. All cells thus
come from pre-existing cells.
Activity ______________ 5.2
We can try preparing temporary
mounts of leaf peels, tip of roots of
onion or even peels of onions of different
sizes.
After performing the above activity, let
us see what the answers to the following
questions would be:
(a) Do all cells look alike in terms of
shape and size?
(b) Do all cells look alike in structure?
(c) Could we find differences among
cells from different parts of a plant
body?
(d) What similarities could we find?
Some organisms can also have cells of
different kinds. Look at the following picture.
It depicts some cells from the human body.
Nerve Cell
Fat cell
Sperm
Bone
cell
Smooth
muscle
cell
Blood
cells
Ovum
Fig. 5.3: Various cells from the human body
M
o
r
e

t
o

k
n
o
w
We can try preparing temporary mounts
of peels of onions of different sizes. What do
we observe? Do we see similar structures or
different structures?
What are these structures?
These structures look similar to each other.
Together they form a big structure like an
onion bulb! We find from this activity that
onion bulbs of different sizes have similar
small structures visible under a microscope.
The cells of the onion peel will all look the
same, regardless of the size of the onion they
came from.
These small structures that we see are
the basic building units of the onion bulb.
These structures are called cells. Not only
onions, but all organisms that we observe
around are made up of cells. However, there
are also single cells that live on their own.
Cells were first discovered by
Robert Hooke in 1665. He observed
the cells in a cork slice with the help
of a primitive microscope.
Leeuwenhoek (1674), with the
improved microscope, discovered the
free living cells in pond water for the
first time. It was Robert Brown in
1831 who discovered the nucleus in
the cell. Purkinje in 1839 coined the
term protoplasm for the fluid
substance of the cell. The cell theory,
that all the plants and animals are
composed of cells and that the cell is
the basic unit of life, was presented
by two biologists, Schleiden (1838)
and Schwann (1839). The cell theory
was further expanded by Virchow
(1855) by suggesting that all cells
arise from pre-existing cells. With the
discovery of the electron microscope
in 1940, it was possible to observe and
understand the complex structure of
the cell and its various organelles.
The invention of magnifying lenses led to
the discovery of the microscopic world. It is
now known that a single cell may constitute
a whole organism as in Amoeba,
THE FUNDAMENTAL UNIT OF LIFE 59
The shape and size of cells are related to
the specific function they perform. Some cells
like Amoeba have changing shapes. In some
cases the cell shape could be more or less
fixed and peculiar for a particular type of cell;
for example, nerve cells have a typical shape.
Each living cell has the capacity to
perform certain basic functions that are
characteristic of all living forms. How does a
living cell perform these basic functions? We
know that there is a division of labour in
multicellular organisms such as human
beings. This means that different parts of the
human body perform different functions. The
human body has a heart to pump blood, a
stomach to digest food and so on. Similarly,
division of labour is also seen within a single
cell in many cases. In fact, each such cell
has got certain specific components within it
known as cell organelles. Each kind of cell
organelle performs a special function, such
as making new material in the cell, clearing
up the waste material from the cell and so
on. A cell is able to live and perform all its
functions because of these organelles. These
organelles together constitute the basic unit
called the cell. It is interesting that all cells
are found to have the same organelles, no
matter what their function is or what
organism they are found in.
uestions
1. Who discovered cells, and how?
2. Why is the cell called the
structural and functional unit of
life?
5.2 What is a Cell Made Up of ?
What is the Str uctural
Organisation of a Cell?
We saw above that the cell has special
components called organelles. How is a cell
organised?
If we study a cell under a microscope, we
would come across three features in almost
every cell; plasma membrane, nucleus and
cytoplasm. All activities inside the cell and
interactions of the cell with its environment
are possible due to these features. Let us see
how.
5.2.1 PLASMA MEMBRANE OR CELL
MEMBRANE
This is the outermost covering of the cell that
separates the contents of the cell from its
external environment. The plasma membrane
allows or permits the entry and exit of some
materials in and out of the cell. It also
prevents movement of some other materials.
The cell membrane, therefore, is called a
selectively permeable membrane.
How does the movement of substances
take place into the cell? How do substances
move out of the cell?
Some substances like carbon dioxide or
oxygen can move across the cell membrane
by a process called diffusion. We have studied
the process of diffusion in earlier chapters.
We saw that there is spontaneous movement
of a substance from a region of high
concentration to a region where its
concentration is low.
Something similar to this happens in cells
when, for example, some substance like CO
2
(which is cellular waste and requires to be
excreted out by the cell) accumulates in high
concentrations inside the cell. In the cells
external environment, the concentration of
CO
2
is low as compared to that inside the
cell. As soon as there is a difference of
concentration of CO
2
inside and outside a cell,
CO
2
moves out of the cell, from a region of
high concentration, to a region of low
concentration outside the cell by the process
of diffusion. Similarly, O
2
enters the cell by
the process of diffusion when the level or
concentration of O
2
inside the cell decreases.
Thus, diffusion plays an important role in
gaseous exchange between the cells as well
as the cell and its external environment.
Water also obeys the law of diffusion. The
movement of water molecules through such
a selectively permeable membrane is called
Q
SCIENCE 60
osmosis. The movement of water across the
plasma membrane is also affected by the
amount of substance dissolved in water.
Thus, osmosis is the passage of water from a
region of high water concentration through a
semi-permeable membrane to a region of low
water concentration.
What will happen if we put an animal cell
or a plant cell into a solution of sugar or salt
in water?
One of the following three things could
happen:
1. If the medium surrounding the cell has
a higher water concentration than the
cell, meaning that the outside solution
is very dilute, the cell will gain water
by osmosis. Such a solution is known
as a hypotonic solution.
Water molecules are free to pass
across the cell membrane in both
directions, but more water will come
into the cell than will leave. The net
(overall) result is that water enters the
cell. The cell is likely to swell up.
2. If the medium has exactly the same
water concentration as the cell, there
will be no net movement of water
across the cell membrane. Such a
solution is known as an isotonic
solution.
Water crosses the cell membrane
in both directions, but the amount
going in is the same as the amount
going out, so there is no overall
movement of water. The cell will stay
the same size.
3. If the medium has a lower
concentration of water than the cell,
meaning that it is a very concentrated
solution, the cell will lose water by
osmosis. Such a solution is known as
a hypertonic solution.
Again, water crosses the cell
membrane in both directions, but this
time more water leaves the cell than
enters it. Therefore the cell will shrink.
Thus, osmosis is a special case of diffusion
through a selectively permeable membrane.
Now let us try out the following activity:
Activity ______________ 5.3
Osmosis with an egg
(a) Remove the shell of an egg by dissolving
it in dilute hydrochloric acid. The shell
is mostly calcium carbonate. A thin
outer skin now encloses the egg. Put
the egg in pure water and observe after
5 minutes. What do we observe?
The egg swells because water passes
into it by osmosis.
(b) Place a similar de-shelled egg in a
concentrated salt solution and observe
for 5 minutes. The egg shrinks. Why?
Water passes out of the egg solution
into the salt solution because the salt
solution is more concentrated.
We can also try a similar activity with dried
raisins or apricots.
Activity ______________ 5.4
Put dried raisins or apricots in plain
water and leave them for some time.
Then place them into a concentrated
solution of sugar or salt. You will
observe the following:
(a) Each gains water and swells when
placed in pure water.
(b) However, when placed in the
concentrated solution it loses water,
and consequently shrinks.
Unicellular freshwater organisms and
most plant cells tend to gain water through
osmosis. Absorption of water by plant roots
is also an example of osmosis.
Thus, diffusion is important in exhange
of gases and water in the life of a cell. In
additions to this, the cell also obtains
nutrition from its environment. Different
molecules move in and out of the cell through
a type of transport requiring use of energy in
the form of ATP.
The plasma membrane is flexible and is
made up of organic molecules called lipids
and proteins. However, we can observe the
structure of the plasma membrane only
through an electron microscope.
The flexibility of the cell membrane also
enables the cell to engulf in food and other
material from its external environment. Such
processes are known as endocytosis. Amoeba
acquires its food through such processes.
Activity ______________ 5.5
Find out about electron microscopes
from resources in the school library or
through the internet. Discuss it with
your teacher.
uestions
1. How do substances like CO
2
and
water move in and out of the cell?
Discuss.
2. Why is the plasma membrane
called a selectively permeable
membrane?
5.2.2 CELL WALL
Plant cells, in addition to the plasma
membrane, have another rigid outer covering
called the cell wall. The cell wall lies outside
the plasma membrane. The plant cell wall is
mainly composed of cellulose. Cellulose is a
complex substance and provides structural
strength to plants.
When a living plant cell loses water
through osmosis there is shrinkage or
contraction of the contents of the cell away
from the cell wall. This phenomenon is known
as plasmolysis. We can observe this
phenomenon by performing the following
activity:
Activity ______________ 5.6
Mount the peel of a Rheo leaf in water
on a slide and examine cells under the
high power of a microscope. Note the
small green granules, called
chloroplasts. They contain a green
substance called chlorophyll. Put a
strong solution of sugar or salt on the
mounted leaf on the slide. Wait for a
minute and observe under a
microscope. What do we see?
Now place some Rheo leaves in boiling
water for a few minutes. This kills the
cells. Then mount one leaf on a slide
and observe it under a microscope. Put
a strong solution of sugar or salt on
the mounted leaf on the slide. Wait for
a minute and observe it again. What
do we find? Did plasmolysis occur now?
What do we infer from this activity? It
appears that only living cells, and not dead
cells, are able to absorb water by osmosis.
Cell walls permit the cells of plants, fungi
and bacteria to withstand very dilute
(hypotonic) external media without bursting.
In such media the cells tend to take up water
by osmosis. The cell swells, building up
pressure against the cell wall. The wall exerts
an equal pressure against the swollen cell.
Because of their walls, such cells can
withstand much greater changes in the
surrounding medium than animal cells.
5.2.3 NUCLEUS
Remember the temporary mount of onion peel
we prepared? We had put iodine solution on
the peel. Why? What would we see if we tried
observing the peel without putting the iodine
solution? Try it and see what the difference
is. Further, when we put iodine solution on
the peel, did each cell get evenly coloured?
According to their chemical composition
dif ferent regions of cells get coloured
differentially. Some regions appear darker
than other regions. Apart from iodine solution
we could also use safranin solution or
methylene blue solution to stain the cells.
We have observed cells from an onion; let
us now observe cells from our own body.
Activity ______________ 5.7
Let us take a glass slide with a drop of
water on it. Using an ice-cream spoon
gently scrape the inside surface of the
cheek. Does any material get stuck on
the spoon? With the help of a needle
we can transfer this material and
spread it evenly on the glass slide kept
ready for this. To colour the material
we can put a drop of methylene blue
solution on it. Now the material is ready
for observation under microscope. Do
not forget to put a cover-slip on it!
What do we observe? What is the shape
of the cells we see? Draw it on the
observation sheet.
Q
SCIENCE 62
Was there a darkly coloured, spherical
or oval, dot-like structure near the
centre of each cell? This structure is
called nucleus. Were there similar
structures in onion peel cells?
The nucleus has a double layered covering
called nuclear membrane. The nuclear
membrane has pores which allow the transfer
of material from inside the nucleus to its
outside, that is, to the cytoplasm (which we
will talk about in section 5.2.4).
The nucleus contains chromosomes,
which are visible as rod-shaped structures
only when the cell is about to divide.
Chromosomes contain information for
inheritance of features from parents to next
generation in the form of DNA (Deoxyribo
Nucleic Acid) molecules. Chromosomes are
composed of DNA and protein. DNA molecules
contain the information necessary for
constructing and organising cells. Functional
segments of DNA are called genes. In a cell
which is not dividing, this DNA is present as
part of chromatin material. Chromatin
material is visible as entangled mass of thread
like structures. Whenever the cell is about to
divide, the chromatin material gets organised
into chromosomes.
The nucleus plays a central role in cellular
reproduction, the process by which a single
cell divides and forms two new cells. It also
plays a crucial part, along with the
environment, in determining the way the cell
will develop and what form it will exhibit at
maturity, by directing the chemical activities
of the cell.
In some organisms like bacteria, the
nuclear region of the cell may be poorly
defined due to the absence of a nuclear
membrane. Such an undefined nuclear region
containing only nucleic acids is called a
nucleoid. Such organisms, whose cells lack
a nuclear membrane, are called prokaryotes
(Pro = primitive or primary; karyote karyon
= nucleus). Organisms with cells having a
nuclear membrane are called eukaryotes.
Prokaryotic cells (see Fig. 5.4) also lack
most of the other cytoplasmic organelles
present in eukaryotic cells. Many of the
functions of such organelles are also
performed by poorly organised parts of the
cytoplasm (see section 5.2.4). The chlorophyll
in photosynthetic prokaryotic bacteria is
associated with membranous vesicles (bag
like structures) but not with plastids as in
eukaryotic cells (see section 5.2.5).
Ribosomes
Plasma
membrane
Cell wall
Nucleoid
Fig. 5.4: Prokaryotic cell
5.2.4 CYTOPLASM
When we look at the temporary mounts of
onion peel as well as human cheek cells, we
can see a large region of each cell enclosed
by the cell membrane. This region takes up
very little stain. It is called the cytoplasm.
The cytoplasm is the fluid content inside the
plasma membrane. It also contains many
specialised cell organelles. Each of these
organelles performs a specific function for the
cell.
Cell organelles are enclosed by
membranes. In prokaryotes, beside the
absence of a defined nuclear region, the
membrane-bound cell organelles are also
absent. On the other hand, the eukaryotic
cells have nuclear membrane as well as
membrane-enclosed organelles.
The significance of membranes can be
illustrated with the example of viruses.
Viruses lack any membranes and hence do
not show characteristics of life until they enter
a living body and use its cell machinery to
multiply.
uestion
1. Fill in the gaps in the following
table illustrating differences
between prokaryotic and
eukaryotic cells.
Prokaryotic Cell Eukaryotic Cell
1. Size : generally 1. Size: generally
small ( 1-10 m) large ( 5-100 m)
1 m = 10
6
m
2. Nuclear region: 2. Nuclear region:
_______________ well defined and
_______________ surrounded by a
and known as__ nuclear membrane
3. Chromosome: 3. More than one
single chromosome
4. Membrane-bound 4. _______________
cell organelles _______________
absent _______________
5.2.5 CELL ORGANELLES
Every cell has a membrane around it to keep
its own contents separate from the external
environment. Large and complex cells,
including cells from multicellular organisms,
need a lot of chemical activities to support
their complicated structure and function. To
keep these activities of different kinds
separate from each other, these cells use
membrane-bound little structures (or
organelles) within themselves. This is one of
the features of the eukaryotic cells that
distinguish them from prokaryotic cells. Some
of these organelles are visible only with an
electron microscope.
We have talked about the nucleus in a
previous section. Some important examples
of cell organelles which we will discuss now
are: endoplasmic reticulum, Golgi apparatus,
lysosomes, mitochondria, plastids and
vacuoles. They are important because they
carry out some very crucial functions in cells.
5.2.5 (i) ENDOPLASMIC RETICULUM (ER)
The endoplasmic reticulum (ER) is a large
network of membrane-bound tubes and
sheets. It looks like long tubules or round or
oblong bags (vesicles). The ER membrane is
similar in structure to the plasma membrane.
There are two types of ER rough endoplasmic
reticulum (RER) and smooth endoplasmic
reticulum (SER). RER looks rough under a
microscope because it has particles called
ribosomes attached to its surface. The
ribosomes, which are present in all active
cells, are the sites of protein manufacture.
The manufactured proteins are then sent to
various places in the cell depending on need,
using the ER. The SER helps in the
manufacture of fat molecules, or lipids,
important for cell function. Some of these
proteins and lipids help in building the cell
membrane. This process is known as
membrane biogenesis. Some other proteins
and lipids function as enzymes and
hormones. Although the ER varies greatly in
appearance in different cells, it always forms
a network system.
Q
Fig. 5.5: Animal cell
Thus, one function of the ER is to serve
as channels for the transport of materials
(especially proteins) between various regions
of the cytoplasm or between the cytoplasm
and the nucleus. The ER also functions as a
cytoplasmic framework providing a surface
SCIENCE 64
Camillo Golgi was born
at Corteno near Brescia
in 1843. He studied
medicine at the
University of Pavia. After
graduating in 1865, he
continued to work in
Pavia at the Hospital of
St. Matteo. At that time
most of his investigations
were concerned with the nervous system,
In 1872 he accepted the post of Chief
Medical Officer at the Hospital for the
Chronically Sick at Abbiategrasso. He first
started his investigations into the nervous
system in a little kitchen of this hospital,
which he had converted into a laboratory.
However, the work of greatest importance,
which Golgi carried out was a revolutionary
method of staining individual nerve and cell
structures. This method is referred to as
the black reaction. This method uses a
weak solution of silver nitrate and is
particularly valuable in tracing the
processes and most delicate ramifications
of cells. All through his life, he continued
to work on these lines, modifying and
improving this technique. Golgi received
the highest honours and awards in
recognition of his work. He shared the
Nobel prize in 1906 with Santiago Ramony
Cajal for their work on the structure of the
nervous system.
5.2.5 (iii) LYSOSOMES
Lysosomes are a kind of waste disposal
system of the cell. Lysosomes help to keep
the cell clean by digesting any foreign material
as well as worn-out cell organelles. Foreign
materials entering the cell, such as bacteria
or food, as well as old organelles end up in
the lysosomes, which break them up into
small pieces. Lysosomes are able to do this
because they contain powerful digestive
enzymes capable of breaking down all organic
material. During the disturbance in cellular
metabolism, for example, when the cell gets
Fig. 5.6: Plant cell
for some of the biochemical activities of the
cell. In the liver cells of the group of animals
called vertebrates (see Chapter 7), SER plays
a crucial role in detoxifying many poisons and
drugs.
5.2.5 (ii) GOLGI APPARATUS
The Golgi apparatus, first described by
Camillo Golgi, consists of a system of
membrane-bound vesicles arranged
approximately parallel to each other in stacks
called cisterns. These membranes often have
connections with the membranes of ER and
therefore constitute another portion of a
complex cellular membrane system.
The material synthesised near the ER is
packaged and dispatched to various targets
inside and outside the cell through the Golgi
apparatus. Its functions include the storage,
modification and packaging of products in
vesicles. In some cases, complex sugars may
be made from simple sugars in the Golgi
apparatus. The Golgi apparatus is also
involved in the formation of lysosomes [see
5.2.5 (iii)].
damaged, lysosomes may burst and the
enzymes digest their own cell. Therefore,
lysosomes are also known as the suicide
bags of a cell. Structurally, lysosomes are
membrane-bound sacs filled with digestive
enzymes. These enzymes are made by RER.
5.2.5 (iv) MITOCHONDRIA
Mitochondria are known as the powerhouses
of the cell. The energy required for various
chemical activities needed for life is released
by mitochondria in the form of ATP
(Adenosine triphopshate) molecules. ATP is
known as the energy currency of the cell. The
body uses energy stored in ATP for making
new chemical compounds and for mechanical
work. Mitochondria have two membrane
coverings instead of just one. The outer
membrane is very porous while the inner
membrane is deeply folded. These folds create
a large surface area for ATP-generating
chemical reactions.
Mitochondria are strange organelles in the
sense that they have their own DNA and
ribosomes. Therefore, mitochondria are able
to make some of their own proteins.
5.2.5 (V) PLASTIDS
Plastids are present only in plant cells. There
are two types of plastids chromoplasts
(coloured plastids) and leucoplasts (white or
colourless plastids). Plastids containing the
pigment chlorophyll are known as
chloroplasts. Chloroplasts are important for
photosynthesis in plants. Chloroplasts also
contain various yellow or orange pigments in
addition to chlorophyll. Leucoplasts are
primarily organelles in which materials such
as starch, oils and protein granules are
stored.
The internal organisation of the plastids
consists of numerous membrane layers
embedded in a material called the stroma.
Plastids are similar to mitochondria in
external structure. Like the mitochondria,
plastids also have their own DNA and
ribosomes.
5.2.5 (vi) VACUOLES
Vacuoles are storage sacs for solid or liquid
contents. Vacuoles are small sized in animal
cells while plant cells have very large vacuoles.
The central vacuole of some plant cells may
occupy 50-90% of the cell volume.
In plant cells vacuoles are full of cell sap
and provide turgidity and rigidity to the cell.
Many substances of importance in the life of
the plant cell are stored in vacuoles. These
include amino acids, sugars, various organic
acids and some proteins. In single-celled
organisms like Amoeba, the food vacuole
contains the food items that the Amoeba has
consumed. In some unicellular organisms,
specialised vacuoles also play important roles
in expelling excess water and some wastes
from the cell.
uestions
1. Can you name the two organelles
we have studied that contain
their own genetic material?
2. If the organisation of a cell is
destroyed due to some physical
or chemical influence, what will
happen?
3. Why are lysosomes known as
suicide bags?
4. Where are proteins synthesised
inside the cell?
Each cell thus acquires its structure and
ability to function because of the organisation
of its membrane and organelles in specific
ways. The cell thus has a basic structural
organisation. This helps the cells to perform
functions like respiration, obtaining nutrition,
and clearing of waste material, or forming new
proteins.
Thus, the cell is the fundamental
structural unit of living organisms. It is also
the basic functional unit of life.
Q
SCIENCE 66
What
you have
learnt
The fundamental organisational unit of life is the cell.
Cells are enclosed by a plasma membrane composed of lipids
and proteins.
The cell membrane is an active part of the cell. It regulates the
movement of materials between the ordered interior of the cell
and the outer environment.
In plant cells, a cell wall composed mainly of cellulose is located
outside the cell membrane.
The presence of the cell wall enables the cells of plants, fungi
and bacteria to exist in hypotonic media without bursting.
The nucleus in eukaryotes is separated from the cytoplasm by
double-layered membrane and it directs the life processes of
the cell.
The ER functions both as a passageway for intracellular
transport and as a manufacturing surface.
The Golgi apparatus consists of stacks of membrane-bound
vesicles that function in the storage, modification and packaging
of substances manufactured in the cell.
Most plant cells have large membranous organelles called
plastids, which are of two types chromoplasts and leucoplasts.
Chromoplasts that contain chlorophyll are called chloroplasts
and they perform photosynthesis.
The primary function of leucoplasts is storage.
Most mature plant cells have a large central vacuole that helps
to maintain the turgidity of the cell and stores important
substances including wastes.
Prokaryotic cells have no membrane-bound organelles, their
chromosomes are composed of only nucleic acid, and they have
only very small ribosomes as organelles.
Exercises
1. Make a comparison and write down ways in which plant cells
are different from animal cells.
2. How is a prokaryotic cell different from a eukaryotic cell?
3. What would happen if the plasma membrane ruptures or breaks
down?
4. What would happen to the life of a cell if there was no Golgi
apparatus?
5. Which organelle is known as the powerhouse of the cell? Why?
6. Where do the lipids and proteins constituting the cell membrane
get synthesised?
7. How does an Amoeba obtain its food?
8. What is osmosis?
9. Carry out the following osmosis experiment:
Take four peeled potato halves and scoos each one out to make
potato cups. One of these potato cups should be made from a
boiled potato. Put each potato cup in a trough containing water.
Now,
(a) Keep cup A empty
(b) Put one teaspoon sugar in cup B
(c) Put one teaspoon salt in cup C
(d) Put one teaspoon sugar in the boiled potato cup D.
Keep these for two hours. Then observe the four potato cups
and answer the following:
(i) Explain why water gathers in the hollowed portion of
B and C.
(ii) Why is potato A necessary for this experiment?
(iii) Explain why water does not gather in the hollowed out
portions of A and D.
From the last chapter, we recall that all living
organisms are made of cells. In unicellular
organisms, a single cell performs all basic
functions. For example, in Amoeba, a single
cell carries out movement, intake of food and
respiratory gases, respiration and excretion.
But in multi-cellular organisms there are
millions of cells. Most of these cells are
specialised to carry out a few functions. Each
specialised function is taken up by a different
group of cells. Since these cells carry out only
a particular function, they do it very
efficiently. In human beings, muscle cells
contract and relax to cause movement, nerve
cells carry messages, blood flows to transport
oxygen, food, hormones and waste material
and so on. In plants, vascular tissues conduct
food and water from one part of the plant to
other parts. So, multi-cellular organisms
show division of labour. Cells specialising in
one function are often grouped together in
the body. This means that a particular
function is carried out by a cluster of cells at
a definite place in the body. This cluster of
cells, called a tissue, is arranged and designed
so as to give the highest possible efficiency of
function. Blood, phloem and muscle are all
examples of tissues.
A group of cells that are similar in
structure and/or work together to achieve a
particular function forms a tissue.
6.1 Are Plants and Animals Made
of Same Types of Tissues?
Let us compare their structure and functions.
Do plants and animals have the same
structure? Do they both perform similar
functions?
There are noticeable differences between
the two. Plants are stationary or fixed they
dont move. Most of the tissues they have are
supportive, which provides them with
structural strength. Most of these tissues are
dead, since dead cells can provide mechanical
strength as easily as live ones, and need less
maintenance.
Animals on the other hand move around
in search of food, mates and shelter. They
consume more energy as compared to plants.
Most of the tissues they contain are living.
Another difference between animals and
plants is in the pattern of growth. The growth
in plants is limited to certain regions, while
this is not so in animals. There are some
tissues in plants that divide throughout their
life. These tissues are localised in certain
regions. Based on the dividing capacity of the
tissues, various plant tissues can be classified
as growing or meristematic tissue and
permanent tissue. Cell growth in animals is
more uniform. So, there is no such
demarcation of dividing and non-dividing
regions in animals.
The structural organisation of organs and
organ systems is far more specialised and
localised in complex animals than even in very
complex plants. This fundamental difference
reflects the different modes of life pursued
by these two major groups of organisms,
particularly in their different feeding methods.
Also, they are differently adapted for a
sedentary existence on one hand (plants) and
active locomotion on the other (animals),
contributing to this difference in organ system
design.
It is with reference to these complex
animal and plant bodies that we will now talk
about the concept of tissues in some detail.
6 6
6 66
T T
T TTISSUES ISSUES ISSUES ISSUES ISSUES
Chapter
uestions
1. What is a tissue?
2. What is the utility of tissues in
multi-cellular organisms?
6.2 Plant Tissues
6.2.1 MERISTEMATIC TISSUE
From the above observations, answer
the following questions:
1. Which of the two onions has longer
roots? Why?
2. Do the roots continue growing even
after we have removed their tips?
3. Why would the tips stop growing in
jar 2 after we cut them?
The growth of plants occurs only in certain
specific regions. This is because the dividing
tissue, also known as meristematic tissue, is
located only at these points. Depending on
the region where they are present,
meristematic tissues are classified as apical,
lateral and intercalary (Fig. 6.2). New cells
produced by meristem are initially like those
of meristem itself, but as they grow and
mature, their characteristics slowly change
and they become dif ferentiated as
components of other tissues.
Fig. 6.1: Growth of roots in onion bulbs
Activity ______________ 6.1
Take two glass jars and fill them with
water.
Now, take two onion bulbs and place
one on each jar, as shown in
Fig. 6.1.
Observe the growth of roots in both the
bulbs for a few days.
Measure the length of roots on day 1,
2 and 3.
On day 4, cut the root tips of the onion
bulb in jar 2 by about 1 cm. After this,
observe the growth of roots in both the
jars and measure their lengths each
day for five more days and record the
observations in tables, like the table
below:
Length Day 1 Day 2 Day 3 Day 4 Day 5
Jar 1
Jar 2
Q
Apical meristem is present at the growing
tips of stems and roots and increases the
length of the stem and the root. The girth of
the stem or root increases due to lateral
meristem (cambium). Intercalary meristem is
the meristem at the base of the leaves or
internodes (on either side of the node)
on twigs.
Apical meristem
Intercalary meristem
Lateral meristem
Fig. 6.2: Location of meristematic tissue in plant body
Jar 1 Jar 2
TISSUES 69
SCIENCE 70
As the cells of this tissue are very active,
they have dense cytoplasm, thin cellulose
walls and prominent nuclei. They lack
vacuoles. Can we think why they would lack
vacuoles? (You might want to refer to the
functions of vacuoles in the chapter on cells.)
6.2.2 PERMANENT TISSUE
What happens to the cells formed by
meristematic tissue? They take up a specific
role and lose the ability to divide. As a result,
they form a permanent tissue. This process
of taking up a permanent shape, size, and a
function is called differentiation. Cells of
meristematic tissue differentiate to form
different types of permanent tissue.
Now, answer the following on the basis
of your observation:
1. Are all cells similar in structure?
2. How many types of cells can
be seen?
3. Can we think of reasons why there
would be so many types of cells?
We can also try to cut sections of plant
roots. We can even try cutting sections
of root and stem of different plants.
6.2.2 (i) SIMPLE PERMANENT TISSUE
A few layers of cells form the basic packing
tissue. This tissue is parenchyma, a type of
permanent tissue. It consists of relatively
unspecialised cells with thin cell walls. They
are live cells. They are usually loosely packed,
Trichome
Mucilaginous canal
Cuticle
Epidermis
Hypodermis
Cortex
Endodermis
Pericycle
Phloem
Cambium
Metaxylem
Protoxylem
Vascular bundle
Pith
Medullary ray
Xylem
Fig. 6.3: Section of a stem
Activity ______________ 6.2
Take a plant stem and with the help
of your teacher cut into very thin slices
or sections.
Now, stain the slices with safranin.
Place one neatly cut section on a slide,
and put a drop of glycerine.
Cover with a cover-slip and observe
under a microscope. Observe the
various types of cells and their
arrangement. Compare it with Fig. 6.3.
so that large spaces between cells
(intercellular spaces) are found in this tissue
[Fig. 6.4 a(i)]. This tissue provides support to
plants and also stores food. In some
situations, it contains chlorophyll and
performs photosynthesis, and then it is called
chlorenchyma. In aquatic plants, large air
cavities are present in parenchyma to give
buoyancy to the plants to help them float.
Such a parenchyma type is called
aerenchyma. The parenchyma of stems and
roots also stores nutrients and water.
TISSUES 71
Fig. 6.4: Various types of simple tissues: (a) Parenchyma (i) transverse section, (ii) longitudinal section;
(b) Collenchyma (i) transverse section, (ii) longitudinal section; (c) Sclerenchyma (i) transverse section,
(ii) longitudinal section.
b (i)
Wall thickenings
Nucleus
Vacuole
Cell wall
b (ii)
End wall
Primary cell wall
(thickened at corners)
Chloroplast
Nucleus
Vacuole
Cytoplasm
Intercellular space
Cytoplasm
Nucleus
Middle lamella
Chloroplast
Vacuole
Intercellular space
Primary cell wall
a (ii)
a (i)
Intercellular spaces
Narrow lumen
Lignified
thick wall
c (ii)
Simple
pit pair
c (i)
The flexibility in plants is due to another
permanent tissue, collenchyma. It allows
easy bending in various parts of a plant (leaf,
stem) without breaking. It also provides
mechanical support to plants. We can find
this tissue in leaf stalks below the epidermis.
The cells of this tissue are living, elongated
and irregularly thickened at the
corners. There is very little intercellular
space (Fig. 6.4 b).
SCIENCE 72
Yet another type of permanent tissue is
sclerenchyma. It is the tissue which makes
the plant hard and stiff. We have seen the
husk of a coconut. It is made of
sclerenchymatous tissue. The cells of this
tissue are dead. They are long and narrow as
the walls are thickened due to lignin (a
chemical substance which acts as cement and
hardens them). Often these walls are so thick
that there is no internal space inside the cell
(Fig. 6.4 c). This tissue is present in stems,
around vascular bundles, in the veins of
leaves and in the hard covering of seeds and
nuts. It provides strength to the plant parts.
Activity ______________ 6.3
Take a freshly plucked leaf of Rheo.
Stretch and break it by applying
pressure.
While breaking it, keep it stretched
gently so that some peel or skin
projects out from the cut.
Remove this peel and put it in a petri
dish filled with water.
Add a few drops of safranin.
Wait for a couple of minutes and then
transfer it onto a slide. Gently place a
cover slip over it.
Observe under microscope.
epidermis may be thicker since protection
against water loss is critical. The entire
surface of a plant has this outer covering of
epidermis. It protects all the parts of the plant.
Epidermal cells on the aerial parts of the plant
often secrete a waxy, water-resistant layer on
their outer surface. This aids in protection
against loss of water, mechanical injury and
invasion by parasitic fungi. Since it has a
protective role to play, cells of epidermal
tissue form a continuous layer without
intercellular spaces. Most epidermal cells are
relatively flat. Often their outer and side walls
are thicker than the inner wall.
We can observe small pores here and there
in the epidermis of the leaf. These pores are
called stomata (Fig. 6.5). Stomata are
enclosed by two kidney-shaped cells called
guard cells. They are necessary for
exchanging gases with the atmosphere.
Transpiration (loss of water in the form of
water vapour) also takes place through
stomata.
Think about which gas may be required
for photosynthesis.
Find out the role of transpiration in plants.
Epidermal cells of the roots, whose
function is water absorption, commonly bear
long hair-like parts that greatly increase the
total absorptive surface area.
In some plants like desert plants,
epidermis has a thick waxy coating of cutin
(chemical substance with waterproof quality)
on its outer surface. Can we think of a reason
for this?
Is the outer layer of a branch of a tree
different from the outer layer of a young stem?
As plants grow older, the outer protective
tissue undergoes certain changes. A strip of
secondary meristem replaces the epidermis
of the stem. Cells on the outside are cut off
from this layer. This forms the several-layer
thick cork or the bark of the tree. Cells of
cork are dead and compactly arranged
without intercellular spaces (Fig. 6.6). They
also have a chemical called suberin in their
walls that makes them impervious to gases
and water.
Fig. 6.5: Guard cells and epidermal cells: (a) lateral
view, (b) surface view
(a) (b)
Guard
cell
Stomata
Epidermal
cell
Guard
cells
What you observe is the outermost layer
of cells, called epidermis. The epidermis is
usually made of a single layer of cells. In some
plants living in very dry habitats, the
TISSUES 73
6.2.2 (ii) COMPLEX PERMANENT TISSUE
The different types of tissues we have
discussed until now are all made of one type
of cells, which look like each other. Such
tissues are called simple permanent tissue.
Yet another type of permanent tissue is
complex tissue. Complex tissues are made of
more than one type of cells. All these cells
coordinate to perform a common function.
Xylem and phloem are examples of such
complex tissues. They are both conducting
tissues and constitute a vascular bundle.
Vascular or conductive tissue is a distinctive
feature of the complex plants, one that has
made possible their survival in the terrestrial
environment. In Fig. 6.3 showing a section of
stem, can you see different types of cells in
the vascular bundle?
Xylem consists of tracheids, vessels,
xylem parenchyma (Fig. 6.7 a,b,c) and xylem
fibres. The cells have thick walls, and many
of them are dead cells. Tracheids and vessels
are tubular structures. This allows them to
transport water and minerals vertically. The
parenchyma stores food and helps in the
sideways conduction of water. Fibres are
mainly supportive in function.
Phloem is made up of four types of
elements: sieve tubes, companion cells,
phloem fibres and the phloem parenchyma
[Fig. 6.7 (d)]. Sieve tubes are tubular cells with
perforated walls. Phloem is unlike xylem in
that materials can move in both directions in
it. Phloem transports food from leaves to other
Cork cells
Ruptured epidermis
Phloem
Fig. 6.6: Protective tissue
parts of the plant. Except for phloem fibres,
phloem cells are living cells.
Xylem
Sieve plate
Sieve tube
Phloem
parenchyma
Companion cell
Nucleus
Cytoplasm
Pits
Pit
(a) Tracheid (b) Vessel (c) Xylem parenchyma
Fig. 6.7: Types of complex tissue
(d) Section of phloem
SCIENCE 74
uestions
1. Name types of simple tissues.
2. Where is apical meristem found?
3. Which tissue makes up the husk
of coconut?
4. What are the constituents of
phloem?
6.3 Animal Tissues
When we breathe we can actually feel the
movement of our chest. How do these body
parts move? For this we have specialised cells
called muscle cells (Fig. 6.8). The contraction
and relaxation of these cells result in
movement.
During breathing we inhale oxygen. Where
does this oxygen go? It is absorbed in the
lungs and then is transported to all the body
cells through blood. Why would cells need
oxygen? The functions of mitochondria we
studied earlier provide a clue to this question.
Blood flows and carries various substances
from one part of the body to the other. For
example, it carries oxygen and food to all cells.
It also collects wastes from all parts of the
body and carries them to the liver and kidney
for disposal.
Blood and muscles are both examples of
tissues found in our body. On the basis of
the functions they perform we can think of
different types of animal tissues, such as
epithelial tissue, connective tissue, muscular
tissue and nervous tissue. Blood is a type of
connective tissue, and muscle forms
muscular tissue.
6.3.1 EPITHELIAL TISSUE
The covering or protective tissues in the
animal body are epithelial tissues. Epithelium
covers most organs and cavities within the
body. It also forms a barrier to keep different
body systems separate. The skin, the lining
of the mouth, the lining of blood vessels, lung
alveoli and kidney tubules are all made of
epithelial tissue. Epithelial tissue cells are
tightly packed and form a continuous sheet.
They have only a small amount of cementing
material between them and almost no
intercellular spaces. Obviously, anything
entering or leaving the body must cross at
least one layer of epithelium. As a result, the
permeability of the cells of various epithelia
play an important role in regulating the
exchange of materials between the body and
the external environment and also between
different parts of the body. Regardless of the
type, all epithelium is usually separated from
the underlying tissue by an extracellular
fibrous basement membrane.
Different epithelia (Fig. 6.9) show differing
structures that correlate with their unique
functions. For example, in cells lining blood
vessels or lung alveoli, where transportation
of substances occurs through a selectively
Q
Fig. 6.8: Location of muscle fibres
Smooth muscle fibres
Smooth muscle fibre
(Cell)
Nucleus
TISSUES 75
permeable surface, there is a simple flat kind
of epithelium. This is called the simple
squamous epithelium. Simple squamous
epithelial cells are extremely thin and flat and
form a delicate lining. The oesophagus and
the lining of the mouth are also covered with
squamous epithelium. The skin, which
protects the body, is also made of squamous
epithelium. Skin epithelial cells are arranged
in many layers to prevent wear and tear. Since
they are arranged in a pattern of layers, the
epithelium is called stratified squamous
epithelium.
Where absorption and secretion occur, as
in the inner lining of the intestine, tall
epithelial cells are present. This columnar
(meaning pillar-like) epithelium facilitates
movement across the epithelial barrier. In the
respiratory tract, the columnar epithelial
tissue also has cilia, which are hair-like
projections on the outer surfaces of epithelial
cells. These cilia can move, and their
movement pushes the mucus forward to clear
it. This type of epithelium is thus ciliated
columnar epithelium.
Cuboidal epithelium (with cube-shaped
cells) forms the lining of kidney tubules and
ducts of salivary glands, where it provides
mechanical support. Epithelial cells often
acquire additional specialisation as gland
cells, which can secrete substances at the
epithelial surface. Sometimes a portion of the
epithelial tissue folds inward, and a
multicellular gland is formed. This is
glandular epithelium.
6.3.2 CONNECTIVE TISSUE
Blood is a type of connective tissue. Why
would it be called connective tissue? A clue
is provided in the introduction of this chapter!
Now, let us look at this type of tissue in some
more detail. The cells of connective tissue are
loosely spaced and embedded in an
intercellular matrix (Fig. 6.10). The matrix
may be jelly like, fluid, dense or rigid. The
nature of matrix differs in concordance with
the function of the particular connective
tissue.
Take a drop of blood on a slide and observe
different cells present in it under a microscope.
(a) Squamous
(d) Stratified squamous
(c) Columnar (Ciliated)
(b) Cuboidal
Fig. 6.9: Different types of epithelial tissues
SCIENCE 76
Blood has a fluid (liquid) matrix called
plasma, in which red blood cells (RBCs), white
blood cells (WBCs) and platelets are
suspended. The plasma contains proteins,
salts and hormones. Blood flows and
transports gases, digested food, hormones
and waste materials to different parts of the
body.
Bone is another example of a connective
tissue. It forms the framework that supports
the body. It also anchors the muscles and
supports the main organs of the body. It is a
strong and nonflexible tissue (what would be
the advantage of these properties for bone
functions?). Bone cells are embedded in a
hard matrix that is composed of calcium and
phosphorus compounds.
Two bones can be connected to each other
by another type of connective tissue called
the ligament. This tissue is very elastic. It has
considerable strength. Ligaments contain
very little matrix. Tendons connect bones to
muscles and are another type of connective
tissue. Tendons are fibrous tissue with great
strength but limited flexibility.
Another type of connective tissue,
cartilage, has widely spaced cells. The solid
matrix is composed of proteins and sugars.
Cartilage smoothens bone surfaces at joints
and is also present in the nose, ear, trachea
and larynx. We can fold the cartilage of the
ears, but we cannot bend the bones in our
arms. Think of how the two tissues are
different!
Areolar connective tissue is found between
the skin and muscles, around blood vessels
and nerves and in the bone marrow. It fills
the space inside the organs, supports internal
organs and helps in repair of tissues.
Where are fats stored in our body? Fat-
storing adipose tissue is found below the skin
and between internal organs. The cells of this
tissue are filled with fat globules. Storage of
fats also lets it act as an insulator.
6.3.3 MUSCULAR TISSUE
Muscular tissue consists of elongated cells,
also called muscle fibres. This tissue is
responsible for movement in our body.
Reticular fibre
Fibroblast
Macrophage
Collagen fibre
Mast cell
Plasma cell
Fat droplet
Nucleus
Adipocyte
(a)
(b)
Haversian canal
(contains blood vessels
and nerve fibres)
Canaliculus (contains
slender process of bone
cell or osteocyte)
Hyaline matrix
Chondrocyte
Different white
blood corpuscles
Neutrophil
(polynuclear
leucocyte)
Basophil Eosinophil
Nucleus
Cytoplasm
Red blood
corpuscle
Lymphocyte Monocyte Platelets
(c)
(d)
(e)
Fig. 6.10: Types of connective tissues: (a) areolar
tissue, (b) adipose tissue, (c) compact
bone, (d) hyaline cartilage, (e) types of
blood cells
TISSUES 77
Muscles contain special proteins called
contractile proteins, which contract and relax
to cause movement.
to bones and help in body movement. Under
the microscope, these muscles show alternate
light and dark bands or striations when
stained appropriately. As a result, they are
also called striated muscles. The cells of this
tissue are long, cylindrical, unbranched and
multinucleate (having many nuclei).
The movement of food in the alimentary
canal or the contraction and relaxation of
blood vessels are involuntary movements. We
cannot really start them or stop them simply
by wanting to do so! Smooth muscles [Fig.
6.11(b)] or involuntary muscles control such
movements. They are also found in the iris of
the eye, in ureters and in the bronchi of the
lungs. The cells are long with pointed ends
(spindle-shaped) and uninucleate (having a
single nucleus). They are also called
unstriated muscles why would they be
called that?
The muscles of the heart show rhythmic
contraction and relaxation throughout life.
These involuntary muscles are called cardiac
muscles [Fig. 6.11(c)]. Heart muscle cells are
cylindrical, branched and uninucleate.
Compare the structures of different types
of muscular tissues. Note their shape,
number of nuclei and position of nuclei within
the cell.
6.3.4 NERVOUS TISSUE
All cells possess the ability to respond to
stimuli. However, cells of the nervous tissue
are highly specialised for being stimulated
and then transmitting the stimulus very
rapidly from one place to another within the
body. The brain, spinal cord and nerves are
all composed of the nervous tissue. The cells
of this tissue are called nerve cells or neurons.
A neuron consists of a cell body with a
nucleus and cytoplasm, from which long thin
hair-like parts arise (Fig. 6.12). Usually each
neuron has a single long part, called the axon,
and many short, branched parts called
dendrites. An individual nerve cell may be up
to a metre long. Many nerve fibres bound
together by connective tissue make up
a nerve.
Nuclei
Striations
(a)
Spindle shaped
muscle cell
Nucleus
(b)
(c)
Striations
Nuclei
Fig. 6.11: Types of muscles fibres: (a) striated
muscle, (b) smooth muscle, (c) cardiac
muscle
We can move some muscles by conscious
will. Muscles present in our limbs move when
we want them to, and stop when we so decide.
Such muscles are called voluntary muscles
[Fig. 6.11(a)]. These muscles are also called
skeletal muscles as they are mostly attached
SCIENCE 78
Nerve impulses allow us to move our
muscles when we want to. The functional
Nucleus
Dendrite
Axon
Nerve ending
Cell body
combination of nerve and muscle tissue is
fundamental to most animals. This
combination enables animals to move rapidly
in response to stimuli.
uestions
1. Name the tissue responsible for
movement in our body.
2. What does a neuron look like?
3. Give three features of cardiac
muscles.
4. What are the functions of areolar
tissue?
Q
What
you have
learnt
Tissue is a group of cells similar in structure and function.
Plant tissues are of two main types meristematic and
permanent.
Meristematic tissue is the dividing tissue present in the growing
regions of the plant.
Permanent tissues are derived from meristematic tissue once
they lose the ability to divide. They are classified as simple and
complex tissues.
Parenchyma, collenchyma and sclerenchyma are three types
of simple tissues. Xylem and phloem are types of complex
tissues.
Animal tissues can be epithelial, connective, muscular and
nervous tissue.
Depending on shape and function, epithelial tissue is classified
as squamous, cuboidal, columnar, ciliated and glandular.
The different types of connective tissues in our body include
areolar tissue, adipose tissue, bone, tendon, ligament, cartilage
and blood.
Striated, unstriated and cardiac are three types of muscle
tissues.
Nervous tissue is made of neurons that receive and conduct
impulses.
Fig. 6.12: Neuron-unit of nervous tissue
TISSUES 79
Exercises
1. Define the term tissue.
2. How many types of elements together make up the xylem tissue?
Name them.
3. How are simple tissues different from complex tissues in plants?
4. Dif ferentiate between parenchyma, collenchyma and
sclerenchyma on the basis of their cell wall.
5. What are the functions of the stomata?
6. Diagrammatically show the difference between the three types
of muscle fibres.
7. What is the specific function of the cardiac muscle?
8. Differentiate between striated, unstriated and cardiac muscles
on the basis of their structure and site/location in the body.
9. Draw a labelled diagram of a neuron.
10. Name the following.
(a) Tissue that forms the inner lining of our mouth.
(b) Tissue that connects muscle to bone in humans.
(c) Tissue that transports food in plants.
(d) Tissue that stores fat in our body.
(e) Connective tissue with a fluid matrix.
(f) Tissue present in the brain.
11. Identify the type of tissue in the following: skin, bark of tree,
bone, lining of kidney tubule, vascular bundle.
12. Name the regions in which parenchyma tissue is present.
13. What is the role of epidermis in plants?
14. How does the cork act as a protective tissue?
15. Complete the table:
Have you ever thought of the multitude of
life-forms that surround us? Each organism
is different from all others to a lesser or
greater extent. For instance, consider yourself
and a friend.
Are you both of the same height?
Does your nose look exactly like your
friends nose?
Is your hand-span the same as your
friends?
However, if we were to compare ourselves
and our friends with a monkey, what would
we say? Obviously, we and our friends have
a lot in common when we compare ourselves
with a monkey. But suppose we were to add
a cow to the comparison? We would then
think that the monkey has a lot more in
common with us than with the cow.
Activity ______________ 7.1
We have heard of desi cows and Jersey
cows.
Does a desi cow look like a Jersey cow?
Do all desi cows look alike?
Will we be able to identify a Jersey cow
in a crowd of desi cows that dont look
like each other?
What is the basis of our identification?
In this activity, we had to decide which
characteristics were more important in
forming the desired category. Hence, we were
also deciding which characteristics could be
ignored.
Now, think of all the different forms in
which life occurs on earth. On one hand we
have microscopic bacteria of a few micrometre
in size. While on the other hand we have blue
whale and red wood trees of california
of approximate sizes of 30 metres and
100 metres repectively. Some pine trees live
for thousands of years while insects like
mosquitoes die within a few days. Life also
ranges from colourless or even transparent
worms to brightly coloured birds and flowers.
This bewildering variety of life around us
has evolved on the earth over millions of
years. However, we do not have more than a
tiny fraction of this time to try and
understand all these living organisms, so we
cannot look at them one by one. Instead, we
look for similarities among the organisms,
which will allow us to put them into different
classes and then study different classes or
groups as a whole.
In order to make relevant groups to study
the variety of life forms, we need to decide
which characteristics decide more
fundamental differences among organisms.
This would create the main broad groups of
organisms. Within these groups, smaller sub-
groups will be decided by less important
characteristics.
uestions
1. Why do we classify organisms?
2. Give three examples of the range
of variations that you see in life-
forms around you.
7.1 What is the Basis of
Classification?
Attempts at classifying living things into
groups have been made since time
immemorial. Greek thinker Aristotle classified
animals according to whether they lived on
Q
7 7
7 77
D D
D DDIVERSITY IVERSITY IVERSITY IVERSITY IVERSITY
IN IN IN IN IN L L
L LLIVING IVING IVING IVING IVING O O
O OORGANISMS RGANISMS RGANISMS RGANISMS RGANISMS
Chapter
land, in water or in the air. This is a very
simple way of looking at life, but misleading
too. For example, animals that live in the sea
include corals, whales, octopuses, starfish
and sharks. We can immediately see that
these are very different from each other in
numerous ways. In fact, their habitat is the
only point they share in common. This is no
good as a way of making groups of organisms
to study and think about.
We therefore need to decide which
characteristics to be used as the basis for
making the broadest divisions. Then we will
have to pick the next set of characteristics
for making sub-groups within these divisions.
This process of classification within each
group can then continue using new
characteristics each time.
Before we go on, we need to think about
what is meant by characteristics. When we
are trying to classify a diverse group of
organisms, we need to find ways in which
some of them are similar enough to be
thought of together. These ways, in fact, are
details of appearance or behaviour, in other
words, form and function.
What we mean by a characteristic is a
particular form or a particular function. That
most of us have five fingers on each hand is
thus a characteristic. That we can run, but
the banyan tree cannot, is also a
characteristic.
Now, to understand how some
characteristics are decided as being more
fundamental than others, let us consider how
a stone wall is built. The stones used will have
different shapes and sizes. The stones at the
top of the wall would not influence the choice
of stones that come below them. On the other
hand, the shapes and sizes of stones in the
lowermost layer will decide the shape and size
of the next layer and so on.
The stones in the lowermost layer are like
the characteristics that decide the broadest
divisions among living organisms. They are
independent of any other characteristics in
their effects on the form and function of the
organism. The characteristics in the next level
would be dependent on the previous one and
would decide the variety in the next level. In
this way, we can build up a whole hierarchy
of mutually related characteristics to be used
for classification.
Now-a-days, we look at many inter-related
characteristics starting from the nature of the
cell in order to classify all living organisms.
What are some concrete examples of such
characteristics used for a hierarchical
classification?
A eukaryotic cell has membrane-bound
organelles, including a nucleus, which
allow cellular processes to be carried out
efficiently in isolation from each other.
Therefore, organisms which do not have
a clearly demarcated nucleus and other
organelles would need to have their
biochemical pathways organised in very
different ways. This would have an effect
on every aspect of cell design. Further,
nucleated cells would have the capacity
to participate in making a multicellular
organism because they can take up
specialised functions. Therefore, this is
a basic characteristic of classification.
Do the cells occur singly or are they
grouped together and do they live as an
indivisible group? Cells that group
together to form a single organism use
the principle of division of labour. In such
a body design, all cells would not be
identical. Instead, groups of cells will
carry out specialised functions. This
makes a very basic distinction in the
body designs of organisms. As a result,
an Amoeba and a worm are very different
in their body design.
Do organisms produce their own food
through the process of photosynthesis?
Being able to produce ones own food
versus having to get food from outside
would make very different body designs
necessary.
Of the organisms that perform
photosynthesis (plants), what is the level
of organisation of their body?
Of the animals, how does the individuals
body develop and organise its different
parts, and what are the specialised
organs found for different functions?
DIVERSITY IN LIVING ORGANISMS 81
SCIENCE 82
We can see that, even in these few
questions that we have asked, a hierarchy is
developing. The characteristics of body design
used for classification of plants will be very
different from those important for classifying
animals. This is because the basic designs
are different, based on the need to make their
own food (plants), or acquire it (animals).
Therefore, these design features (having a
skeleton, for example) are to be used to make
sub-groups, rather than making broad groups.
uestions
1. Which do you think is a more basic
characteristic for classifying
organisms?
(a) the place where they live.
(b) the kind of cells they are
made of. Why?
2. What is the primary characteristic
on which the first division of
organisms is made?
3. On what bases are plants and
animals put into different
categories?
7.2 Classification and Evolution
All living things are identified and categorised
on the basis of their body design in form and
function. Some characteristics are likely to
make more wide-ranging changes in body
design than others. There is a role of time in
this as well. So, once a certain body design
comes into existence, it will shape the effects
of all other subsequent design changes,
simply because it already exists. In other
words, characteristics that came into
existence earlier are likely to be more basic
than characteristics that have come into
existence later.
This means that the classification of life
forms will be closely related to their evolution.
What is evolution? Most life forms that we
see today have arisen by an accumulation of
changes in body design that allow the
organism possessing them to survive better.
Charles Darwin first described this idea of
evolution in 1859 in his book, The Origin of
Species.
When we connect this idea of evolution to
classification, we will find some groups of
organisms which have ancient body designs
that have not changed very much. We will
also find other groups of organisms that have
acquired their particular body designs
relatively recently. Those in the first group
are frequently referred to as primitive or lower
organisms, while those in the second group
are called advanced or higher organisms. In
reality, these terms are not quite correct since
they do not properly relate to the differences.
All that we can say is that some are older
organisms, while some are younger
organisms. Since there is a possibility that
complexity in design will increase over
evolutionary time, it may not be wrong to say
that older organisms are simpler, while
younger organisms are more complex.
Q
M
o
r
e

t
o

k
n
o
w
Biodiversity means the diversity of life
forms. It is a word commonly used to
refer to the variety of life forms found
in a particular region. Diverse life forms
share the environment, and are
affected by each other too. As a result,
a stable community of different species
comes into existence. Humans have
played their own part in recent times
in changing the balance of such
communities. Of course, the diversity
in such communities is affected by
particular characteristics of land,
water, climate and so on. Rough
estimates state that there are about ten
million species on the planet, although
we actually know only one or two
millions of them. The warm and humid
tropical regions of the earth, between
the tropic of Cancer and the tropic of
Capricorn, are rich in diversity of plant
and animal life. This is called the region
of megadiversity. Of the biodiversity
of the planet, more than half is
concentrated in a few countries
Brazil, Colombia, Ecuador, Peru,
Mexico, Zaire, Madagascar,
Australia, China, India, Indonesia and
Malaysia.
uestions
1. Which organisms are called
primitive and how are they
different from the so-called
advanced organisms?
2. Will advanced organisms be the
same as complex organisms?
Why?
7.3 The Hierarchy of Classification-
Groups
Biologists, such as Ernst Haeckel (1894),
Robert Whittaker (1959) and Carl Woese
(1977) have tried to classify all living
organisms into broad categories, called
kingdoms. The classification Whittaker
proposed has five kingdoms: Monera,
Protista, Fungi, Plantae and Animalia, and
is widely used. These groups are formed on
the basis of their cell structure, mode and
source of nutrition and body organisation.
The modification Woese introduced by
dividing the Monera into Archaebacteria (or
Archaea) and Eubacteria (or Bacteria) is also
in use.
Further classification is done by naming
the sub-groups at various levels as given in
the following scheme:
Kingdom
Phylum (for animals) / Division (for plants)
Class
Order
Family
Genus
Species
Thus, by separating organisms on the
basis of a hierarchy of characteristics into
smaller and smaller groups, we arrive at the
basic unit of classification, which is a
species. So what organisms can be said to
belong to the same species? Broadly, a species
includes all organisms that are similar
enough to breed and perpetuate.
The important characteristics of the five
kingdoms of Whittaker are as follows:
7.3.1 MONERA
These organisms do not have a defined
nucleus or organelles, nor do any of them
show multi-cellular body designs. On the
other hand, they show diversity based on
many other characteristics. Some of them
have cell walls while some do not. Of course,
having or not having a cell wall has very
different effects on body design here from
having or not having a cell wall in multi-
cellular organisms. The mode of nutrition of
organisms in this group can be either by
synthesising their own food (autotrophic) or
getting it from the environment
(heterotrophic). This group includes bacteria,
blue-green algae or cyanobacteria, and
mycoplasma. Some examples are shown
in Fig. 7.1.
Q
Bacteria
Resting
spore
Heterocyst
Anabaena
Fig. 7.1: Monera
7.3.2 PROTISTA
This group includes many kinds of unicellular
eukaryotic organisms. Some of these
organisms use appendages, such as hair-like
cilia or whip-like flagella for moving around.
Their mode of nutrition can be autotrophic
or heterotrophic. Examples are unicellular
algae, diatoms and protozoans (see Fig. 7.2
for examples).
SCIENCE 84
to become multicellular organisms at certain
stages in their lives. They have cell-walls made
of a tough complex sugar called chitin.
Examples are yeast and mushrooms (see Fig.
7.3 for examples).
Water vacuole
Cilia
Macronucleus
Micronucleus
Oral groove
Cytosome
Food vacuole
Cytopyge
Waste
Flagellum (long)
Flagellum (short)
Eyespot
Photoreceptor
Contractile
vacuole
Chloroplast
Photoreceptor
Nucleolus
Nucleus
Ectoplasm
Endoplasm
Mitochondria
Nucleus
Crystals
Food vacuole
Contractile vacuole
Advancing
pseudopod
Paramecium
Amoeba
Euglena
Fig. 7.2: Protozoa
7.3.3 FUNGI
These are heterotrophic eukaryotic
organisms. They use decaying organic
material as food and are therefore called
saprophytes. Many of them have the capacity
Fig. 7.3: Fungi
Some fungal species live in permanent
mutually dependent relationships with blue-
green algae (or cyanobacteria). Such
relationships are called symbiotic. These
symbiobic life forms are called lichens. We
have all seen lichens as the slow-growing
large coloured patches on the bark of trees.
7.3.4 PLANTAE
These are multicellular eukaryotes with cell
walls. They are autotrophs and use
chlorophyll for photosynthesis. Thus, all
plants are included in this group. Since
plants and animals are most visible forms
of the diversity of life around us, we will look
at the subgroups in this category later
(section 7.4).
7.3.5 ANIMALIA
These include all organisms which are
multicellular eukaryotes without cell walls.
They are heterotrophs. Again, we will look
at their subgroups a little later in
section 7.5.
Penicillium
Agaricus
Aspergillus
Fig. 7.4: The Five Kingdom classification
uestions
1. What is the criterion for
classification of organisms as
belonging to kingdom Monera or
Protista?
2. In which kingdom will you place
an organism which is single-
celled, eukaryotic and
photosynthetic?
3. In the hierarchy of classification,
which grouping will have the
smallest number of organisms
with a maximum of
characteristics in common and
which will have the largest
number of organisms?
Q
7.4 Plantae
The first level of classification among plants
depends on whether the plant body has well-
differentiated, distinct components. The next
level of classification is based on whether the
differentiated plant body has special tissues
for the transport of water and other
substances within it. Further classification
looks at the ability to bear seeds and whether
the seeds are enclosed within fruits.
7.4.1 THALLOPHYTA
Plants that do not have well-differentiated
body design fall in this group. The plants in
this group are commonly called algae. These
SCIENCE 86
plants are predominantly aquatic. Examples
are Spirogyra, Ulothrix, Cladophora and Chara
(see Fig. 7.5).
7.4.2 BRYOPHYTA
These are called the amphibians of the plant
kingdom. The plant body is commonly
differentiated to form stem and leaf-like
structures. However, there is no specialised
tissue for the conduction of water and other
substances from one part of the plant body
to another. Examples are moss (Funaria) and
Marchantia (see Fig. 7.6).
Fig. 7.5: Thallophyta Algae
Cell-wall
Chloroplast
Pyrenoids
Nucleus
Cytoplasm
Ulothrix
Cladophora
Ulva
Spirogyra
Chara
Fig. 7.6: Some common bryophytes
7.4.3 PTERIDOPHYTA
In this group, the plant body is differentiated
into roots, stem and leaves and has
specialised tissue for the conduction of water
and other substances from one part of the
plant body to another. Some examples are
Marsilea, ferns and horse-tails (see Fig. 7.7).
The thallophytes, the bryophytes and the
pteridophytes have naked embryos that are
called spores. The reproductive organs of
plants in all these three groups are very
inconspicuous, and they are therefore called
cryptogamae , or those with hidden
reproductive organs.
Riccia
Marchantia
Funaria
On the other hand, plants with well-
differentiated reproductive tissues that
ultimately make seeds are called
phanerogams. Seeds are the result of the
reproductive process. They consist of the
embryo along with stored food, which serves
for the initial growth of the embryo during
germination. This group is further classified,
based on whether the seeds are naked or
enclosed in fruits, giving us two groups:
gymnosperms and angiosperms.
7.4.4 GYMNOSPERMS
This term is made from two Greek words:
gymno means naked and sperma means
seed. The plants of this group bear naked
seeds and are usually perennial, evergreen
and woody. Examples are pines, such as
deodar (see Fig. 7.8 for examples).
7.4.5 ANGIOSPERMS
This word is made from two Greek words:
angio means covered and sperma means
seed. The seeds develop inside an organ which
is modified to become a fruit. These are also
called flowering plants. Plant embryos in
seeds have structures called cotyledons.
Cotyledons are called seed leaves because
in many instances they emerge and become
green when the seed germinates. Thus,
cotyledons represent a bit of pre-designed
plant in the seed. The angiosperms are
divided into two groups on the basis of the
number of cotyledons present in the seed.
Plants with seeds having a single cotyledon
are called monocotyledonous or monocots.
Plants with seeds having two cotyledons are
called dicots (see Figs. 7.9 and 7.10).
Marsilea
Fern
Leaf
Sporocarp
Stem
Root
Fig. 7.7: Pteridophyta
Pinus
Fig. 7.8: Gymnosperms
Cycas
Fig. 7.9: Monocots Paphiopedilum
Fig. 7.10: Dicots Ipomoea
SCIENCE 88
Activity ______________ 7.2
Soak seeds of green gram, wheat,
maize, peas and tamarind. Once they
become tender, try to split the seed. Do
all the seeds break into two nearly
equal halves?
The seeds that do are the dicot seeds
and the seeds that dont are the
monocot seeds.
Now take a look at the roots, leaves and
flowers of these plants.
Are the roots tap-roots or fibrous?
Do the leaves have parallel or reticulate
venation?
Fig. 7.11: Classification of plants
How many petals are found in the
flower of these plants?
Can you write down further
characteristics of monocots and dicots
on the basis of these observations?
uestions
1. Which division among plants has
the simplest organisms?
2. How are pteridophytes different
from the phanerogams?
3. How do gymnosperms and
angiosperms differ from each
other?
Q
7.5 Animalia
These are organisms which are eukaryotic,
multicellular and heterotrophic. Their cells
do not have cell-walls. Most animals are
mobile.
They are further classified based on the
extent and type of the body design
differentiation found.
7.5.1 PORIFERA
The word means organisms with holes. These
are non-motile animals attached to some solid
support. There are holes or pores, all over
the body. These lead to a canal system that
helps in circulating water throughout the
body to bring in food and oxygen. These
animals are covered with a hard outside layer
or skeleton. The body design involves very
minimal differentiation and division into
tissues. They are commonly called sponges,
and are mainly found in marine habitats.
Some examples are shown in Fig. 7.12.
layers of cells: one makes up cells on the
outside of the body, and the other makes the
inner lining of the body. Some of these species
live in colonies (corals), while others have a
solitary likespan (Hydra). Jellyfish and sea
anemones are common examples (see
Fig. 7.13).
Sycon Euplectelia
Spongilla
Fig. 7.12: Porifera
Tentacles
Sea anemone
Tentacles
Stinging cell
Mouth
Epidermis
Mesoglea
Gastrodermis
Gastrovascular
cavity
Foot
Fig. 7.13: Coelenterata
7.5.3 PLATYHELMINTHES
The body of animals in this group is far more
complexly designed than in the two other
groups we have considered so far. The body
is bilaterally symmetrical, meaning that the
left and the right halves of the body have the
same design. There are three layers of cells
from which differentiated tissues can be
made, which is why such animals are called
triploblastic. This allows outside and inside
body linings as well as some organs to be
made. There is thus some degree of tissue
formation. However, there is no true internal
body cavity or coelom, in which well-
developed organs can be accommodated. The
body is flattened dorsiventrally, meaning from
top to bottom, which is why these animals
are called flatworms. They are either free-
living or parasitic. Some examples are free-
living animals like planarians, or parasitic
animals like liverflukes (see Fig. 7.14 for
examples).
Hydra
7.5.2 COELENTERATA
These are animals living in water. They show
more body design differentiation. There is a
cavity in the body. The body is made of two
SCIENCE 90
7.5.5 ANNELIDA
Annelid animals are also bilaterally
symmetrical and triploblastic, but in addition
they have a true body cavity. This allows true
organs to be packaged in the body structure.
There is, thus, extensive organ differentiation.
This differentiation occurs in a segmental
fashion, with the segments lined up one after
the other from head to tail. These animals
are found in a variety of habitats fresh water,
marine water as well as land. Earthworms
and leeches are familiar examples (see
Fig. 7.16).
Acetabulum
Scolex Sucker
Neck
Tape worm
Liverfluke
Eyes
Branched
gastrovascular
cavity
Pharynx
Mouth
and anus
Planareia
Fig. 7.14: Platyhelminthes
7.5.4 NEMATODA
The nematode body is also bilaterally
symmetrical and triploblastic. However, the
body is cylindrical rather than flattened.
There are tissues, but no real organs,
although a sort of body cavity or a pseudo-
coelom, is present. These are very familiar
as parasitic worms causing diseases, such
as the worms causing elephantiasis (filarial
worms) or the worms in the intestines
(roundworm or pinworms). Some examples
are shown in Fig. 7.15.
Female
Male
Ascaris
Wuchereria
Fig. 7.15: Nematodes (Aschelminthes)
Tentacle
Palp
Parapodia
Parapodia
Nereis Earthworm Leech
Fig. 7.16: Annelida
7.5.6 ARTHROPODA
This is probably the largest group of animals.
These animals are bilaterally symmetrical and
segmented. There is an open circulatory
system, and so the blood does not flow in well-
defined blood vessels. The coelomic cavity is
blood-filled. They have jointed legs (the word
arthropod means jointed legs). Some
familiar examples are prawns, butterflies,
houseflies, spiders, scorpions and crabs (see
Fig. 7.17).
Genital
papillae
Anus
Palamnaeus
(Scorpion)
7.5.7 MOLLUSCA
In the animals of this group, there is bilateral
symmetry. The coelomic cavity is reduced.
There is little segmentation. They have an
open circulatory system and kidney-like
organs for excretion. There is a foot that is
used for moving around. Examples are snails
and mussels (see Fig. 7.18).
7.5.8 ECHINODERMATA
In Greek, echinos means hedgehog, and
derma means skin. Thus, these are spiny
skinned organisms. These are exclusively
free-living marine animals. They are
triploblastic and have a coelomic cavity. They
also have a peculiar water-driven tube system
that they use for moving around. They have
hard calcium carbonate structures that they
use as a skeleton. Examples are starfish and
sea urchins (see Fig. 7.19).
Pariplaneta
(Cockroach)
Palaemon
(Prawn)
Aranea(Spider)
Fig. 7.17: Arthropoda
Chiton
Octopus
Pila
Unio
Fig. 7.18: Mollusca
Antedon
(feather star)
Holothuria
(sea cucumber)
Echinus (sea urchin)
Asterias (star fish)
7.5.9 PROTOCHORDATA
These animals are bilaterally symmetrical,
triploblastic and have a coelom. In addition,
they show a new feature of body design,
namely a notochord, at least at some stages
during their lives. The notochord is a long
rod-like support structure (chord=string) that
runs along the back of the animal separating
the nervous tissue from the gut. It provides a
place for muscles to attach for ease of
movement. Protochordates may not have a
proper notochord present at all stages in their
Fig. 7.19: Echinodermata
Musca
(House fly)
Butterfly
Scolopendra
(Centipede)
SCIENCE 92
lives or for the entire length of the animal.
Protochordates are marine animals.
Examples are Balanoglossus, Herdemania
and Amphioxus (see Fig. 7.20).
7.5.10 (i) PISCES
These are fish. They are exclusively water-
living animals. Their skin is covered with
scales/plates. They obtain oxygen dissolved
in water by using gills. The body is
streamlined, and a muscular tail is used for
movement. They are cold-blooded and their
hearts have only two chambers, unlike the
four that humans have. They lay eggs. We
can think of many kinds of fish, some with
skeletons made entirely of cartilage, such as
sharks, and some with a skeleton made of
both bone and cartilage, such as tuna or rohu
[see examples in Figs. 7.21 (a) and 7.21 (b)].
Proboscis
Collarette
Collar
Branchial region
Gill pores
Dorsally
curved
genital wings
Middosrsal
ridge
Hepatic caeca
Hepatic region
Posthepatic
region
Anus
Fig. 7.20: A Protochordata: Balanoglossus
7.5.10 VERTEBRATA
These animals have a true vertebral column
and internal skeleton, allowing a completely
different distribution of muscle attachment
points to be used for movement.
Vertebrates are bilaterally symmetrical,
triploblastic, coelomic and segmented, with
complex differentiation of body tissues and
organs. All chordates possess the following
features:
(i) have a notochord
(ii) have a dorsal nerve cord
(iii) are triploblastic
(iv) have paired gill pouches
(v) are coelomate.
Vertebrates are grouped into five classes.
Caulophyryne jordani
(Angler fish)
Synchiropus splendidus
(Mandarin fish)
Pterois volitans
(Lion fish)
Spiracle
Eye
Pelvic fin
Dorsal fin
Caudal fin
Tail
Electric ray (Torpedo)
Sting ray
Mouth
Dorsal fin
Tail Eye
Gills
Pectoral
fin
Pelvic
fin
Fig. 7.21 (a): Pisces
Scoliodon (Dog fish)
7.5.10 (ii) AMPHIBIA
These animals differ from the fish in the lack
of scales, in having mucus glands in the skin,
and a three-chambered heart. Respiration is
through either gills or lungs. They lay eggs.
These animals are found both in water and
on land. Frogs, toads and salamanders are
some examples (see Fig. 7.22).
7.5.10 (iii) REPTILIA
These animals are cold-blooded, have scales
and breathe through lungs. While most of
them have a three-chambered heart,
crocodiles have four heart chambers. They
lay eggs with tough coverings and do not need
to lay their eggs in water, unlike amphibians.
Snakes, turtles, lizards and crocodiles fall in
this category (see Fig. 7.23).
Eye
Head
Nostril
Mouth
Pectoral
fin
Pelvic
fin
Caudal
fin
Labeo rohita (Rohu)
Pectoral
fin
Mouth
Brood
pouch
Dorsal
fin
Tail
Male Hippocampus
(Sea horse)
Wing like pectoral
Tail
Pelvic fin
Scales
Exocoetus (Flying fish)
Anabas (Climbing perch)
Fig. 7.21 (b): Pisces
Fig. 7.22: Amphibia
Rana tigrina
(Common frog)
Toad
Hyla (Tree frog)
Salamander
Turtle
Chameleon
King Cobra
House wall lizard
(Hemidactylus)
Flying lizard (Draco)
7.5.10 (iv) AVES
These are warm-blooded animals and have a
four-chambered heart. They lay eggs. There
is an outside covering of feathers, and two
forelimbs are modified for flight. They breathe
through lungs. All birds fall in this category
(see Fig. 7.24 for examples).
Fig. 7.23: Reptilia
SCIENCE 94
7.5.10 (V) MAMMALIA
Mammals are warm-blooded animals with
four-chambered hearts. They have mammary
glands for the production of milk to nourish
their young. Their skin has hairs as well as
sweat and oil glands. Most mammals familiar
to us produce live young ones. However, a
few of them, like the platypus and the echidna
lay eggs, and some, like kangaroos give birth
to very poorly developed young ones. Some
examples are shown in Fig. 7.25.
The scheme of classification of animals is
shown in Fig. 7.26.
White Stork
(Ciconia ciconia)
Ostrich
(Struthio camelus)
Male Tufted Duck
(Aythya fuligula)
Pigeon
Sparrow
Crow
Fig. 7.24: Aves (birds)
Fig. 7.25: Mammalia
uestions
1. How do poriferan animals differ
from coelenterate animals?
2. How do annelid animals differ
from arthropods?
3. What are the differences between
amphibians and reptiles?
animals belonging to the Aves
group and those in the mammalia
group?
Q
Carolus Linnaeus (Karl
von Linne) was born in
Sweden and was a doctor
by professsion. He was
interested in the study of
plants. At the age of 22,
he published his first
paper on plants. While
serving as a personal
physician of a wealthy
government of ficial, he studied the
diversity of plants in his employers
garden. Later, he published 14 papers and
also brought out the famous book
Systema Naturae from which all
fundamental taxonomical researches have
taken off. His system of classification was
a simple scheme for arranging plants so
as to be able to identify them again.
Carolus Linnaeus
(1707-1778)
Whale
Human
Cat
Rat
Bat
Fig. 7.26: Classification of animals
SCIENCE 96
7.6 Nomenclature
Why is there a need for systematic naming of
living organisms?
Activity ______________ 7.3
Find out the names of the following
animals and plants in as many
languages as you can:
1. Tiger 2. Peacock 3. Ant
4. Neem 5. Lotus 6. Potato
As you might be able to appreciate, it
would be difficult for people speaking or
writing in different languages to know when
they are talking about the same organism.
This problem was resolved by agreeing upon
a scientific name for organisms in the same
manner that chemical symbols and formulae
for various substances are used the world
over. The scientific name for an organism is
thus unique and can be used to identify it
anywhere in the world.
The system of scientific naming or
nomenclature we use today was introduced
by Carolus Linnaeus in the eighteenth
century. The scientific name of an organism
is the result of the process of classification
which puts it along with the organisms it is
most related to. But when we actually name
the species, we do not list out the whole
hierarchy of groups it belongs to. Instead, we
limit ourselves to writing the name of the
genus and species of that particular
organism. The world over, it has been agreed
that both these names will be used in Latin
forms.
Certain conventions are followed while
writing the scientific names:
1. The name of the genus begins with a
capital letter.
2. The name of the species begins with a
small letter.
3. When printed, the scientific name is
given in italics.
4. When written by hand, the genus
name and the species name have to
be underlined separately.
Activity ______________ 7.4
Find out the scientific names of any
five common animals and plants. Do
these names have anything in common
with the names you normally use to
identify them?
What
you have
learnt
Classification helps us in exploring the diversity of life forms.
The major characteristics considered for classifying all
organisms into five major kingdoms are:
(a) whether they are made of prokaryotic or eukaryotic cells
(b) whether the cells are living singly or organised into multi-
cellular and thus complex organisms
(c) whether the cells have a cell-wall and whether they prepare
their own food.
All living organisms are divided on the above bases into five
kingdoms, namely Monera, Protista, Fungi, Plantae and
Animalia.
The classification of life forms is related to their evolution.
Plantae and Animalia are further divided into subdivisions on
the basis of increasing complexity of body organisation.
Plants are divided into five groups: Thallophytes, Bryophytes,
Pteridophytes, Gymnosperms and Angiosperms.
Animals are divided into ten groups: Porifera, Coelenterata,
Platyhelminthes, Nematoda, Annelida, Arthropoda, Mollusca,
Echinodermata, Protochordata and Vertebrata.
The binomial nomenclature makes for a uniform way of
identification of the vast diversity of life around us.
The binomial nomenclature is made up of two words a generic
name and a specific name.
Exercises
1. What are the advantages of classifying organisms?
2. How would you choose between two characteristics to be used
for developing a hierarchy in classification?
3. Explain the basis for grouping organisms into five kingdoms.
4. What are the major divisions in the Plantae? What is the basis
for these divisions?
5. How are the criteria for deciding divisions in plants different
from the criteria for deciding the subgroups among animals?
6. Explain how animals in Vertebrata are classified into further
subgroups.
In everyday life, we see some objects at rest
and others in motion. Birds fly, fish swim,
blood flows through veins and arteries and
cars move. Atoms, molecules, planets, stars
and galaxies are all in motion. We often
perceive an object to be in motion when its
position changes with time. However, there
are situations where the motion is inferred
through indirect evidences. For example, we
infer the motion of air by observing the
movement of dust and the movement of leaves
and branches of trees. What causes the
phenomena of sunrise, sunset and changing
of seasons? Is it due to the motion of the
earth? If it is true, why dont we directly
perceive the motion of the earth?
An object may appear to be moving for
one person and stationary for some other. For
the passengers in a moving bus, the roadside
trees appear to be moving backwards. A
person standing on the roadside perceives
the bus alongwith the passengers as moving.
However, a passenger inside the bus sees his
fellow passengers to be at rest. What do these
observations indicate?
Most motions are complex. Some objects
may move in a straight line, others may take
a circular path. Some may rotate and a few
others may vibrate. There may be situations
involving a combination of these. In this
chapter, we shall first learn to describe the
motion of objects along a straight line. We
shall also learn to express such motions
through simple equations and graphs. Later,
we shall discuss ways of describing circular
motion.
Activity ______________ 8.1
Discuss whether the walls of your
classroom are at rest or in motion.
Activity ______________ 8.2
Have you ever experienced that the
train in which you are sitting appears
to move while it is at rest?
Discuss and share your experience.
Think and Act
We sometimes are endangered by the
motion of objects around us, especially
if that motion is erratic and
uncontrolled as observed in a flooded
river, a hurricane or a tsunami. On the
other hand, controlled motion can be a
service to human beings such as in the
generation of hydro-electric power. Do
you feel the necessity to study the
erratic motion of some objects and
learn to control them?
8.1 Describing Motion
We describe the location of an object by
specifying a reference point. Let us
understand this by an example. Let us
assume that a school in a village is 2 km north
of the railway station. We have specified the
position of the school with respect to the
railway station. In this example, the railway
station is the reference point. We could have
also chosen other reference points according
to our convenience. Therefore, to describe the
position of an object we need to specify a
reference point called the origin.
8 8
8 88
M M
M MMOTION OTION OTION OTION OTION
Chapter
8.1.1 MOTION ALONG A STRAIGHT LINE
The simplest type of motion is the motion
along a straight line. We shall first learn to
describe this by an example. Consider the
motion of an object moving along a straight
path. The object starts its journey from O
which is treated as its reference point
(Fig. 8.1). Let A, B and C represent the
position of the object at different instants. At
first, the object moves through C and B and
reaches A. Then it moves back along the same
path and reaches C through B.
displacement, are used to describe the overall
motion of an object and to locate its final
position with reference to its initial position
at a given time.
Activity ______________ 8.3
Take a metre scale and a long rope.
Walk from one corner of a basket-ball
court to its oppposite corner along its
sides.
Measure the distance covered by you
and magnitude of the displacement.
What difference would you notice
between the two in this case?
Activity ______________ 8.4
Automobiles are fitted with a device
that shows the distance travelled. Such
a device is known as an odometer. A
car is driven from Bhubaneshwar to
New Delhi. The difference between the
final reading and the initial reading of
the odometer is 1850 km.
Find the magnitude of the displacement
between Bhubaneshwar and New Delhi
by using the Road Map of India.
The total path length covered by the object
is OA + AC, that is 60 km + 35 km = 95 km.
This is the distance covered by the object. To
describe distance we need to specify only the
numerical value and not the direction of
motion. There are certain quantities which
are described by specifying only their
numerical values. The numerical value of a
physical quantity is its magnitude. From this
example, can you find out the distance of the
final position C of the object from the initial
position O? This difference will give you the
numerical value of the displacement of the
object from O to C through A. The shortest
distance measured from the initial to the final
position of an object is known as the
displacement.
Can the magnitude of the displacement
be equal to the distance travelled by an
object? Consider the example given in
(Fig. 8.1). For motion of the object from O to
A, the distance covered is 60 km and the
magnitude of displacement is also 60 km.
During its motion from O to A and back to B,
the distance covered = 60 km + 25 km = 85 km
Fig. 8.1: Positions of an object on a straight line path
while the magnitude of displacement = 35 km.
Thus, the magnitude of displacement (35 km)
is not equal to the path length (85 km).
Further, we will notice that the magnitude of
the displacement for a course of motion may
be zero but the corresponding distance
covered is not zero. If we consider the object
to travel back to O, the final position concides
with the initial position, and therefore, the
displacement is zero. However, the distance
covered in this journey is OA + AO = 60 km +
60 km = 120 km. Thus, two different physical
quantities the distance and the
MOTION 99
SCIENCE 100
uestions
1. An object has moved through a
distance. Can it have zero
displacement? If yes, support
your answer with an example.
2. A farmer moves along the
boundary of a square field of side
10 m in 40 s. What will be the
magnitude of displacement of the
farmer at the end of 2 minutes
20 seconds?
3. Which of the following is true for
displacement?
(a) It cannot be zero.
(b) Its magnitude is greater than
the distance travelled by the
object.
8.1.2 UNIFORM MOTION AND NON-
UNIFORM MOTION
Consider an object moving along a straight
line. Let it travel 50 km in the first hour,
50 km more in the second hour, 50 km in the
third hour and 50 km in the fourth hour. In
this case, the object covers 50 km in each
hour. As the object covers equal distances in
equal intervals of time, it is said to be in
uniform motion. The time interval in this
motion may be small or big. In our
day-to-day life, we come across motions where
objects cover unequal distances in equal
intervals of time, for example, when a car is
moving on a crowded street or a person is
jogging in a park. These are some instances
of non-uniform motion.
Activity ______________ 8.5
The data regarding the motion of two
different objects A and B are given in
Table 8.1.
Examine them carefully and state
whether the motion of the objects is
uniform or non-uniform.
Q
(a)
(b)
Fig. 8.2
Table 8.1
Time Distance Distance
travelled by travelled by
object A in m object B in m
9:30 am 10 12
9:45 am 20 19
10:00 am 30 23
10:15 am 40 35
10:30 am 50 37
10:45 am 60 41
11:00 am 70 44
8.2 Measuring the Rate of Motion
MOTION 101
Look at the situations given in Fig. 8.2. If
the bowling speed is 143 km h
1
in Fig. 8.2(a)
what does it mean? What do you understand
from the signboard in Fig. 8.2(b)?
Different objects may take different
amounts of time to cover a given distance.
Some of them move fast and some move
slowly. The rate at which objects move can
be different. Also, different objects can move
at the same rate. One of the ways of
measuring the rate of motion of an object is
to find out the distance travelled by the object
in unit time. This quantity is referred to as
speed. The SI unit of speed is metre per
second. This is represented by the symbol
m s
1
or m/s.

The other units of speed include
centimetre per second (cm s
1
) and kilometre
per hour (km h
1
). To specify the speed of an
object, we require only its magnitude. The
speed of an object need not be constant. In
most cases, objects will be in non-uniform
motion. Therefore, we describe the rate of
motion of such objects in terms of their
average speed. The average speed of an object
is obtained by dividing the total distance
travelled by the total time taken. That is,
average speed =
Total distance travelled
Total time taken
If an object travels a distance s in time t then
its speed v is,
v =
s
t
(8.1)
Let us understand this by an example. A
car travels a distance of 100 km in 2 h. Its
average speed is 50 km h
1
. The car might
not have travelled at 50 km h
1
all the time.
Sometimes it might have travelled faster and
sometimes slower than this.
Example 8.1 An object travels 16 m in 4 s
and then another 16 m in 2 s. What is
the average speed of the object?
Solution:
Total distance travelled by the object =
16 m + 16 m = 32 m
Total time taken = 4 s + 2 s = 6 s
Average speed =
Total distance travelled
Total time taken
=
32 m
6 s
= 5.33 m s
1
Therefore, the average speed of the object
is 5.33 m s
1
.
8.2.1 SPEED WITH DIRECTION
The rate of motion of an object can be more
comprehensive if we specify its direction of
motion along with its speed. The quantity that
specifies both these aspects is called velocity.
Velocity is the speed of an object moving in a
definite direction. The velocity of an object
can be uniform or variable. It can be changed
by changing the objects speed, direction of
motion or both. When an object is moving
along a straight line at a variable speed, we
can express the magnitude of its rate of
motion in terms of average velocity. It is
calculated in the same way as we calculate
average speed.
In case the velocity of the object is
changing at a uniform rate, then average
velocity is given by the arithmetic mean of
initial velocity and final velocity for a given
period of time. That is,
average velocity =
initial velocity +final velocity
2
Mathematically, v
av
=
u + v
2
(8.2)
where v
av
is the average velocity, u is the initial
velocity and v is the final velocity of the object.
Speed and velocity have the same units,
that is, m s
1
or m/s.
Activity ______________ 8.6
Measure the time it takes you to walk
from your house to your bus stop or
the school. If you consider that your
average walking speed is 4 km h
1
,
estimate the distance of the bus stop
or school from your house.
SCIENCE 102
=
50
km 1000m 1h

h 1km 3600s
= 13.9 m s
1
The average speed of the car is
50 km h
1
or 13.9 m s
1
.
Example 8.3 Usha swims in a 90 m long
pool. She covers 180 m in one minute
by swimming from one end to the other
and back along the same straight path.
Find the average speed and average
velocity of Usha.
Solution:
Total distance covered by Usha in 1 min
is 180 m.
Displacement of Usha in 1 min = 0 m
Average speed =
Total distance covered
Total timetaken
=
180m 180 m 1 min
=
1min 1min 60s
= 3 m s
-1
Average velocity =
Displacement
Total timetaken
=
0m
60 s
= 0 m s
1
The average speed of Usha is 3 m s
1
and her average velocity is 0 m s
1
.
8.3 Rate of Change of Velocity
During uniform motion of an object along a
straight line, the velocity remains constant
with time. In this case, the change in velocity
of the object for any time interval is zero.
However, in non-uniform motion, velocity
varies with time. It has different values at
different instants and at different points of
the path. Thus, the change in velocity of the
object during any time interval is not zero.
Can we now express the change in velocity of
an object?
Activity ______________ 8.7
At a time when it is cloudy, there may
be frequent thunder and lightning. The
sound of thunder takes some time to
reach you after you see the lightning.
Can you answer why this happens?
Measure this time interval using a
digital wrist watch or a stop watch.
Calculate the distance of the nearest
point of lightning. (Speed of sound in
air = 346 m s
-1
.)
uestions
1. Distinguish between speed and
velocity.
2. Under what condition(s) is the
magnitude of average velocity of
an object equal to its average
speed?
3. What does the odometer of an
automobile measure?
4. What does the path of an object
look like when it is in uniform
motion?
5. During an experiment, a signal
from a spaceship reached the
ground station in five minutes.
What was the distance of the
spaceship from the ground
station? The signal travels at the
speed of light, that is, 3 10
8
m s
1
.
Example 8.2 The odometer of a car reads
2000 km at the start of a trip and
2400 km at the end of the trip. If the
trip took 8 h, calculate the average
speed of the car in km h
1
and m s
1
.
Solution:
Distance covered by the car,
s = 2400 km 2000 km = 400 km
Time elapsed, t = 8 h
Average speed of the car is,
v
av
=
400 km
8 h
=
s
t
= 50 km h
1
Q
MOTION 103
To answer such a question, we have to
introduce another physical quantity called
acceleration, which is a measure of the
change in the velocity of an object per unit
time. That is,
acceleration =
change in velocity
time taken
If the velocity of an object changes from
an initial value u to the final value v in time t,
the acceleration a is,
v u
a =
t
(8.3)
This kind of motion is known as
accelerated motion. The acceleration is taken
to be positive if it is in the direction of velocity
and negative when it is opposite to the
direction of velocity. The SI unit of
acceleration is m s
2
.
If an object travels in a straight line and
its velocity increases or decreases by equal
amounts in equal intervals of time, then the
acceleration of the object is said to be
uniform. The motion of a freely falling body
is an example of uniformly accelerated
motion. On the other hand, an object can
travel with non-uniform acceleration if its
velocity changes at a non-uniform rate. For
example, if a car travelling along a straight
road increases its speed by unequal amounts
in equal intervals of time, then the car is said
to be moving with non-uniform acceleration.
Activity ______________ 8.8
In your everyday life you come across
a range of motions in which
(a) acceleration is in the direction of
motion,
(b) acceleration is against the
direction of motion,
(c) acceleration is uniform,
(d) acceleration is non-uniform.
Can you identify one example each of
the above type of motion?
Example 8.4 Starting from a stationary
position, Rahul paddles his bicycle to
attain a velocity of 6 m s
1
in 30 s. Then
he applies brakes such that the velocity
of the bicycle comes down to 4 m s
-1
in
the next 5 s. Calculate the acceleration
of the bicycle in both the cases.
Solution:
In the first case:
initial velocity, u = 0 ;
final velocity, v = 6 m s
1
;
time, t = 30 s .
From Eq. (8.3), we have
v u
a =
t
Substituting the given values of u,v and
t in the above equation, we get
( )
1 1
6m s 0m s
=
30 s
a
= 0.2 m s
2
In the second case:
initial velocity, u = 6 m s
1
;
final velocity, v = 4 m s
1
;
time, t = 5 s.
Then,
( )
1 1
4m s 6m s
=
5 s
a
= 0.4 m s
2
.
The acceleration of the bicycle in the
first case is 0.2 m s
2
and in the second
case, it is 0.4 m s
2
.
uestions
1. When will you say a body is in
(i) uniform acceleration? (ii) non-
uniform acceleration?
2. A bus decreases its speed from
80 km h
1
to 60 km h
1
in 5 s.
Find the acceleration of the bus.
3. A train starting from a railway
station and moving with uniform
acceleration attains a speed
40 km h
1
in 10 minutes. Find its
acceleration.
Q
SCIENCE 104
8.4 Graphical Representation of
Motion
Graphs provide a convenient method to
present basic information about a variety of
events. For example, in the telecast of a
one-day cricket match, vertical bar graphs
show the run rate of a team in each over. As
you have studied in mathematics, a straight
line graph helps in solving a linear equation
having two variables.
To describe the motion of an object, we
can use line graphs. In this case, line graphs
show dependence of one physical quantity,
such as distance or velocity, on another
quantity, such as time.
8.4.1 DISTANCETIME GRAPHS
The change in the position of an object with
time can be represented on the distance-time
graph adopting a convenient scale of choice.
In this graph, time is taken along the xaxis
and distance is taken along the y-axis.
Distance-time graphs can be employed under
various conditions where objects move with
uniform speed, non-uniform speed, remain
at rest etc.
Fig. 8.3: Distance-time graph of an object moving
with uniform speed
We know that when an object travels
equal distances in equal intervals of time, it
moves with uniform speed. This shows that
the distance travelled by the object is directly
proportional to time taken. Thus, for uniform
speed, a graph of distance travelled against
time is a straight line, as shown in Fig. 8.3.
The portion OB of the graph shows that the
distance is increasing at a uniform rate. Note
that, you can also use the term uniform
velocity in place of uniform speed if you take
the magnitude of displacement equal to the
distance travelled by the object along the
y-axis.
We can use the distance-time graph to
determine the speed of an object. To do so,
consider a small part AB of the distance-time
graph shown in Fig 8.3. Draw a line parallel
to the x-axis from point A and another line
parallel to the y-axis from point B. These two
lines meet each other at point C to form a
triangle ABC. Now, on the graph, AC denotes
the time interval (t
2
t
1
) while BC corresponds
to the distance (s
2
s
1
). We can see from the
graph that as the object moves from the point
A to B, it covers a distance (s
2
s
1
) in time
(t
2
t
1
). The speed, v of the object, therefore
can be represented as
v =
2 1
2 1
s s
t t
(8.4)
We can also plot the distance-time graph
for accelerated motion. Table 8.2 shows the
distance travelled by a car in a time interval
of two seconds.
Table 8.2: Distance travelled by a
car at regular time intervals
Time in seconds Distance in metres
0 0
2 1
4 4
6 9
8 16
10 25
12 36
MOTION 105
The distance-time graph for the motion
of the car is shown in Fig. 8.4. Note that the
shape of this graph is different from the earlier
distance-time graph (Fig. 8.3) for uniform
motion. The nature of this graph shows non-
linear variation of the distance travelled by
the car with time. Thus, the graph shown in
Fig 8.4 represents motion with non-uniform
speed.
8.4.2 VELOCITY-TIME GRAPHS
The variation in velocity with time for an
object moving in a straight line can be
represented by a velocity-time graph. In this
graph, time is represented along the x-axis
Fig. 8.4: Distance-time graph for a car moving with
non-uniform speed
Fig. 8.5: Velocity-time graph for uniform motion of
a car
and the velocity is represented along the
y-axis. If the object moves at uniform velocity,
the height of its velocity-time graph will not
change with time (Fig. 8.5). It will be a straight
line parallel to the x-axis. Fig. 8.5 shows the
velocity-time graph for a car moving with
uniform velocity of 40 km h
1
.
We know that the product of velocity and
time give displacement of an object moving
with uniform velocity. The area enclosed by
velocity-time graph and the time axis will be
equal to the magnitude of the displacement.
To know the distance moved by the car
between time t
1
and t
2
using Fig. 8.5, draw
perpendiculars from the points corresponding
to the time t
1
and t
2
on the graph. The velocity
of 40 km h
1
is represented by the height AC
or BD and the time (t
2
t
1
) is represented by
the length AB.
So, the distance s moved by the car in
time (t
2
t
1
) can be expressed as
s = AC CD
= [(40 km h
1
) (t
2
t
1
) h]
= 40 (t
2
t
1
) km
= area of the rectangle ABDC (shaded
in Fig. 8.5).
We can also study about uniformly
accelerated motion by plotting its velocity
time graph. Consider a car being driven along
a straight road for testing its engine. Suppose
a person sitting next to the driver records its
velocity after every 5 seconds by noting the
reading of the speedometer of the car. The
velocity of the car, in km h
1
as well as in
m s
1
,

at different instants of time is shown
in table 8.3.
Table 8.3: Velocity of a car at
regular instants of time
Time Velocity of the car
(s) (m s
1
) (km h
1
)
0 0 0
5 9 2.5
10 18 5.0
15 27 7.5
20 36 10.0
25 45 12.5
30 54 15.0
SCIENCE 106
In this case, the velocity-time graph for
the motion of the car is shown in Fig. 8.6.
The nature of the graph shows that velocity
changes by equal amounts in equal intervals
of time. Thus, for all uniformly accelerated
motion, the velocity-time graph is a
straight line.
Fig. 8.6: Velocity-time graph for a car moving with
uniform accelerations.
You can also determine the distance
moved by the car from its velocity-time graph.
The area under the velocity-time graph gives
the distance (magnitude of displacement)
moved by the car in a given interval of time.
If the car would have been moving with
uniform velocity, the distance travelled by it
would be represented by the area ABCD
under the graph (Fig. 8.6). Since the
magnitude of the velocity of the car is
changing due to acceleration, the distance s
travelled by the car will be given by the area
ABCDE under the velocity-time graph
(Fig. 8.6).
That is,
s = area ABCDE
= area of the rectangle ABCD + area of
the triangle ADE
= AB BC +
1
2
(AD DE)
In the case of non-uniformly accelerated
motion, velocity-time graphs can have any
shape.
Fig. 8.7: Velocity-time graphs of an object in non-
uniformly accelerated motion.
Fig. 8.7(a) shows a velocity-time graph
that represents the motion of an object whose
velocity is decreasing with time while
Fig. 8.7 (b) shows the velocity-time graph
representing the non-uniform variation of
velocity of the object with time. Try to interpret
these graphs.
Activity ______________ 8.9
The times of arrival and departure of a
train at three stations A, B and C and
the distance of stations B and C from
station A are given in table 8.4.
Table 8.4: Distances of stations B
and C from A and times of arrival
and departure of the train
Station Distance Time of Time of
from A arrival departure
(km) (hours) (hours)
A 0 08:00 08:15
B 120 11:15 11:30
C 180 13:00 13:15
Plot and interpret the distance-time
graph for the train assuming that its
motion between any two stations is
uniform.
MOTION 107
8.5 Equations of Motion by
Graphical Method
When an object moves along a straight line
with uniform acceleration, it is possible to
relate its velocity, acceleration during motion
and the distance covered by it in a certain
time interval by a set of equations known as
the equations of motion. There are three such
equations. These are:
v = u + at (8.5)
s = ut + at
2
(8.6)
2 a s = v
2
u
2
(8.7)
where u is the initial velocity of the object
which moves with uniform acceleration a for
time t, v is the final velocity, and s is the
distance travelled by the object in time t.
Eq. (8.5) describes the velocity-time relation
and Eq. (8.6) represents the position-time
relation. Eq. (8.7), which represents the
relation between the position and the velocity,
can be obtained from Eqs. (8.5) and (8.6) by
eliminating t. These three equations can be
derived by graphical method.
8.5.1 EQUATION FOR VELOCITY-TIME
RELATION
Consider the velocity-time graph of an object
that moves under uniform acceleration as
Activity _____________8.10
Feroz and his sister Sania go to school
on their bicycles. Both of them start at
the same time from their home but take
different times to reach the school
although they follow the same route.
Table 8.5 shows the distance travelled
by them in different times
Table 8.5: Distance covered by Feroz
and Sania at different times on
their bicycles
Time Distance Distance
travelled travelled
by Feroz by Sania
(km) (km)
8:00 am 0 0
8:05 am 1.0 0.8
8:10 am 1.9 1.6
8:15 am 2.8 2.3
8:20 am 3.6 3.0
8:25 am 3.6
Q
Plot the distance-time graph for their
motions on the same scale and
interpret.
uestions
1. What is the nature of the
distance-time graphs for uniform
and non-uniform motion of an
object?
2. What can you say about the
motion of an object whose
distance-time graph is a straight
line parallel to the time axis?
3. What can you say about the
motion of an object if its speed-
time graph is a straight line
parallel to the time axis?
4. What is the quantity which is
measured by the area occupied
below the velocity-time graph?
Fig. 8.8: Velocity-time graph to obtain the equations
of motion
SCIENCE 108
= OA OC +
1
2
(AD BD) (8.10)
Substituting OA = u, OC = AD = t and
BD = at, we get
s = u t +
1
( )
2
t at
or s = u t +
1
2
a t
2
8.5.3 EQUATION FOR POSITIONVELOCITY
RELATION
From the velocity-time graph shown in
Fig. 8.8, the distance s travelled by the object
in time t, moving under uniform acceleration
a is given by the area enclosed within the
trapezium OABC under the graph. That is,
s = area of the trapezium OABC
=
( ) OA + BC OC
2
Substituting OA = u, BC = v and OC = t,
we get
( )
2
=
u + v t
s (8.11)
From the velocity-time relation (Eq. 8.6),
we get
t =
v u
a
( )
(8.12)
Using Eqs. (8.11) and (8.12) we have
( ) ( ) v + u v - u
s=
2a
or 2 a s = v
2
u
2
Example 8.5 A train starting from rest
attains a velocity of 72 km h
1
in
5 minutes. Assuming that the
acceleration is uniform, find (i) the
acceleration and (ii) the distance
travelled by the train for attaining this
velocity.
shown in Fig. 8.8 (similar to Fig. 8.6, but now
with u 0). From this graph, you can see that
initial velocity of the object is u (at point A)
and then it increases to v (at point B) in time
t. The velocity changes at a uniform rate a.
In Fig. 8.8, the perpendicular lines BC and
BE are drawn from point B on the time and
the velocity axes respectively, so that the
initial velocity is represented by OA, the final
velocity is represented by BC and the time
interval t is represented by OC. BD = BC
CD, represents the change in velocity in time
interval t.
Let us draw AD parallel to OC. From the
graph, we observe that
BC = BD + DC = BD + OA
Substituting BC = v and OA = u,
we get v = BD + u
or BD = v u (8.8)
From the velocity-time graph (Fig. 8.8),
the acceleration of the object is given by
a =
Change in velocity
timetaken
=
BD BD
=
AD OC
Substituting OC = t, we get
a =
BD
t
or BD = at (8.9)
Using Eqs. (8.8) and (8.9) we get
v = u + at
8.5.2 EQUATION FOR POSITION-TIME
RELATION
Let us consider that the object has travelled
a distance s in time t under uniform
acceleration a. In Fig. 8.8, the distance
travelled by the object is obtained by the area
enclosed within OABC under the velocity-time
graph AB.
Thus, the distance s travelled by the object
is given by
s = area OABC (which is a trapezium)
= area of the rectangle OADC + area of
the triangle ABD
MOTION 109
Solution:
We have been given
u = 0 ; v = 72 km h
1
= 20 m s
-1
and
t = 5 minutes = 300 s.
(i) From Eq. (8.5) we know that
( ) v u
a=
t
1 1
2
20 m s 0ms
=
300s
1
= ms
15
(ii) From Eq. (8.7) we have
2 a s = v
2
u
2
= v
2
0
Thus,
2
1 2
2
=
2
(20 ms )
=
2(1/15) ms
v
s
a
= 3000 m
= 3 km
The acceleration of the train is
1
15
m s
2
and the distance travelled is 3 km.
Example 8.6 A car accelerates uniformly
from 18 km h
1
to 36 km h
1
in 5 s.
Calculate (i) the acceleration and (ii) the
distance covered by the car in that time.
Solution:
We are given that
u = 18 km h
1
= 5 m s
1
v = 36 km h
1
= 10 m s
1
and
t = 5 s .
(i) From Eq. (8.5) we have
v u
a =
t
=
-1 -1
10 cm s 5 m s
5s
= 1 m s
2
(ii) From Eq. (8.6) we have
s = u t +
1
2
a t
2
= 5 m s
1
5 s +
1
2
1 m s
2
(5 s)
2
= 25 m + 12.5 m
= 37.5 m
The acceleration of the car is 1 m s
2
and the distance covered is 37.5 m.
Example 8.7 The brakes applied to a car
produce an acceleration of 6 m s
-2
in
the opposite direction to the motion. If
the car takes 2 s to stop after the
application of brakes, calculate the
distance it travels during this time.
Solution:
We have been given
a = 6 m s
2
; t = 2 s and v = 0 m s
1
.
From Eq. (8.5) we know that
v = u + at
0 = u + ( 6 m s
2
) 2 s
or u = 12 m s
1
.
From Eq. (8.6) we get
s = u t +
1
2
a t
2
= (12 m s
1
) (2 s) +
1
2
(6 m s
2
) (2 s)
2
= 24 m 12 m
= 12 m
Thus, the car will move 12 m before it
stops after the application of brakes.
Can you now appreciate why drivers
are cautioned to maintain some
distance between vehicles while
travelling on the road?
uestions
1. A bus starting from rest moves
with a uniform acceleration of
0.1 m s
-2
for 2 minutes. Find (a)
the speed acquired, (b) the
distance travelled.
Q
SCIENCE 110
2. A train is travelling at a speed of
90 km h
1
. Brakes are applied so
as to produce a uniform
acceleration of 0.5 m s
-2
. Find
how far the train will go before it
is brought to rest.
3. A trolley, while going down an
inclined plane, has an
acceleration of 2 cm s
-2
. What will
be its velocity 3 s after the start?
4. A racing car has a uniform
acceleration of 4 m s
-2
. What
distance will it cover in 10 s after
start?
5. A stone is thrown in a vertically
upward direction with a velocity
of 5 m s
-1
. If the acceleration of the
stone during its motion is 10 m s
2
in the downward direction, what
will be the height attained by the
stone and how much time will it
take to reach there?
8.6 Uniform Circular Motion
When the velocity of an object changes, we
say that the object is accelerating. The change
in the velocity could be due to change in its
magnitude or the direction of the motion or
both. Can you think of an example when an
object does not change its magnitude of
velocity but only its direction of motion?
Let us consider an example of the motion
of a body along a closed path. Fig 8.9 (a) shows
the path of an athlete along a rectangular
track ABCD. Let us assume that the athlete
runs at a uniform speed on the straight parts
AB, BC, CD and DA of the track. In order to
keep himself on track, he quickly changes
his speed at the corners. How many times
will the athlete have to change his direction
of motion, while he completes one round? It
is clear that to move in a rectangular track
once, he has to change his direction of motion
four times.
Now, suppose instead of a rectangular
track, the athlete is running along a
hexagonal shaped path ABCDEF, as shown
in Fig. 8.9(b). In this situation, the athlete
will have to change his direction six times
while he completes one round. What if the
track was not a hexagon but a regular
octagon, with eight equal sides as shown by
ABCDEFGH in Fig. 8.9(c)? It is observed that
as the number of sides of the track increases
the athelete has to take turns more and more
often. What would happen to the shape of
the track as we go on increasing the number
of sides indefinitely? If you do this you will
notice that the shape of the track approaches
the shape of a circle and the length of each of
the sides will decrease to a point. If the athlete
moves with a velocity of constant magnitude
along the circular path, the only change in
his velocity is due to the change in the
direction of motion. The motion of the athlete
moving along a circular path is, therefore, an
example of an accelerated motion.
We know that the circumference of a circle
of radius r is given by
2 r
. If the athlete takes
t seconds to go once around the circular path
of radius r, the velocity v is given by
2 r
v =
t
(8.13)
When an object moves in a circular path
with uniform speed, its motion is called
uniform circular motion.
(a) Rectangular track (b) Hexagonal track
(d) A circular track (c) Octagonal shaped track
Fig. 8.9: The motion of an athlete along closed tracks
of different shapes.
MOTION 111
If you carefully note, on being released
the stone moves along a straight line
tangential to the circular path. This is
because once the stone is released, it
continues to move along the direction it has
been moving at that instant. This shows that
the direction of motion changed at every point
when the stone was moving along the circular
path.
When an athlete throws a hammer or a
discus in a sports meet, he/she holds the
hammer or the discus in his/her hand and
gives it a circular motion by rotating his/her
own body. Once released in the desired
direction, the hammer or discus moves in the
direction in which it was moving at the time
it was released, just like the piece of stone in
the activity described above. There are many
more familiar examples of objects moving
under uniform circular motion, such as the
motion of the moon and the earth, a satellite
in a circular orbit around the earth, a cyclist
on a circular track at constant speed
and so on.
Activity _____________8.11
Take a piece of thread and tie a small
piece of stone at one of its ends. Move
the stone to describe a circular path
with constant speed by holding the
thread at the other end, as shown in
Fig. 8.10.
Fig. 8.10: A stone describing a circular path with
a velocity of constant magnitude.
Now, let the stone go by releasing the
thread.
Can you tell the direction in which the
stone moves after it is released?
By repeating the activity for a few times
and releasing the stone at different
positions of the circular path, check
whether the direction in which the
stone moves remains the same or not.
What
you have
learnt
Motion is a change of position; it can be described in terms of
the distance moved or the displacement.
The motion of an object could be uniform or non-uniform
depending on whether its velocity is constant or changing.
The speed of an object is the distance covered per unit time,
and velocity is the displacement per unit time.
The acceleration of an object is the change in velocity per unit
time.
Uniform and non-uniform motions of objects can be shown
through graphs.
The motion of an object moving at uniform acceleration can be
described with the help of three equations, namely
v = u + at
s = ut + at
2
2as = v
2
u
2
SCIENCE 112
where u is initial velocity of the object, which moves with
uniform acceleration a for time t, v is its final velocity and s is
the distance it travelled in time t.
If an object moves in a circular path with uniform speed, its
motion is called uniform circular motion.
Exercises
1. An athlete completes one round of a circular track of diameter
200 m in 40 s. What will be the distance covered and the
displacement at the end of 2 minutes 20 s?
2. Joseph jogs from one end A to the other end B of a straight
300 m road in 2 minutes 50 seconds and then turns around
and jogs 100 m back to point C in another 1 minute. What are
Josephs average speeds and velocities in jogging (a) from A to
B and (b) from A to C?
3. Abdul, while driving to school, computes the average speed for
his trip to be 20 km h
1
. On his return trip along the same
route, there is less traffic and the average speed is
40 km h
1
. What is the average speed for Abduls trip?
4. A motorboat starting from rest on a lake accelerates in a straight
line at a constant rate of 3.0 m s
2
for 8.0 s. How far does the
boat travel during this time?
5. A driver of a car travelling at 52 km h
1
applies the brakes and
accelerates uniformly in the opposite direction. The car stops
in 5 s. Another driver going at 3 km h
1
in another car applies
his brakes slowly and stops in 10 s. On the same graph paper,
plot the speed versus time graphs for the two cars. Which of
the two cars travelled farther after the brakes were applied?
6. Fig 8.11 shows the distance-time graph of three objects A,B
and C. Study the graph and answer the following questions:
Fig. 8.11
MOTION 113
(a) Which of the three is travelling the fastest?
(b) Are all three ever at the same point on the road?
(c) How far has C travelled when B passes A?
(d) How far has B travelled by the time it passes C?
7. A ball is gently dropped from a height of 20 m. If its velocity
increases uniformly at the rate of 10 m s
-2
, with what velocity
will it strike the ground? After what time will it strike the
ground?
8. The speed-time graph for a car is shown is Fig. 8.12.
Fig. 8.12
(a) Find how far does the car travel in the first 4 seconds.
Shade the area on the graph that represents the distance
travelled by the car during the period.
(b) Which part of the graph represents uniform motion of the
car?
9. State which of the following situations are possible and give
an example for each of these:
(a) an object with a constant acceleration but with zero velocity
(b) an object moving in a certain direction with an acceleration
in the perpendicular direction.
10. An artificial satellite is moving in a circular orbit of radius
42250 km. Calculate its speed if it takes 24 hours to revolve
around the earth.
In the previous chapter, we described the
motion of an object along a straight line in
terms of its position, velocity and acceleration.
We saw that such a motion can be uniform
or non-uniform. We have not yet discovered
what causes the motion. Why does the speed
of an object change with time? Do all motions
require a cause? If so, what is the nature of
this cause? In this chapter we shall make an
attempt to quench all such curiosities.
For many centuries, the problem of
motion and its causes had puzzled scientists
and philosophers. A ball on the ground, when
given a small hit, does not move forever. Such
observations suggest that rest is the natural
state of an object. This remained the belief
until Galileo Galilei and Isaac Newton
developed an entirely different approach to
understand motion.
In our everyday life we observe that some
effort is required to put a stationary object
into motion or to stop a moving object. We
ordinarily experience this as a muscular effort
and say that we must push or hit or pull on
an object to change its state of motion. The
concept of force is based on this push, hit or
pull. Let us now ponder about a force. What
is it? In fact, no one has seen, tasted or felt a
force. However, we always see or feel the effect
of a force. It can only be explained by
describing what happens when a force is
applied to an object. Pushing, hitting and
pulling of objects are all ways of bringing
objects in motion (Fig. 9.1). They move
because we make a force act on them.
From your studies in earlier classes, you
are also familiar with the fact that a force can
be used to change the magnitude of velocity
of an object (that is, to make the object move
faster or slower) or to change its direction of
motion. We also know that a force can change
the shape and size of objects (Fig. 9.2).
(a) The trolley moves along the
direction we push it.
(c) The hockey stick hits the ball forward
(b) The drawer is pulled.
Fig. 9.1: Pushing, pulling, or hitting objects change
their state of motion.
(a)
(b)
Fig. 9.2: (a) A spring expands on application of force;
(b) A spherical rubber ball becomes oblong
as we apply force on it.
9 9
9 99
F F
F FFORCE ORCE ORCE ORCE ORCE
AND AND AND AND AND L L
L LLAWS AWS AWS AWS AWS
OF OF OF OF OF M M
M MMOTION OTION OTION OTION OTION
Chapter
box with a small force, the box does not move
because of friction acting in a direction
opposite to the push [Fig. 9.4(a)]. This friction
force arises between two surfaces in contact;
in this case, between the bottom of the box
and floors rough surface. It balances the
pushing force and therefore the box does not
move. In Fig. 9.4(b), the children push the
box harder but the box still does not move.
This is because the friction force still balances
the pushing force. If the children push the
box harder still, the pushing force becomes
bigger than the friction force [Fig. 9.4(c)].
There is an unbalanced force. So the box
starts moving.
What happens when we ride a bicycle?
When we stop pedalling, the bicycle begins
to slow down. This is again because of the
friction forces acting opposite to the direction
of motion. In order to keep the bicycle moving,
we have to start pedalling again. It thus
appears that an object maintains its motion
under the continuous application of an
unbalanced force. However, it is quite
incorrect. An object moves with a uniform
velocity when the forces (pushing force and
frictional force) acting on the object are
balanced and there is no net external force
on it. If an unbalanced force is applied on
the object, there will be a change either in its
speed or in the direction of its motion. Thus,
to accelerate the motion of an object, an
unbalanced force is required. And the change
in its speed (or in the direction of motion)
would continue as long as this unbalanced
force is applied. However, if this force is
9.1 Balanced and Unbalanced
Forces
Fig. 9.3 shows a wooden block on a horizontal
table. Two strings X and Y are tied to the two
opposite faces of the block as shown. If we
apply a force by pulling the string X, the block
begins to move to the right. Similarly, if we
pull the string Y, the block moves to the left.
But, if the block is pulled from both the sides
with equal forces, the block will not move.
Such forces are called balanced forces and
do not change the state of rest or of motion of
an object. Now, let us consider a situation in
which two opposite forces of different
magnitudes pull the block. In this case, the
block would begin to move in the direction of
the greater force. Thus, the two forces are
not balanced and the unbalanced force acts
in the direction the block moves. This
suggests that an unbalanced force acting on
an object brings it in motion.
Fig. 9.3: Two forces acting on a wooden block
What happens when some children try to
push a box on a rough floor? If they push the
(a) (b) (c)
Fig. 9.4
FORCE AND LAWS OF MOTION 115
SCIENCE 116
removed completely, the object would
continue to move with the velocity it has
acquired till then.
9.2 First Law of Motion
By observing the motion of objects on an
inclined plane Galileo deduced that objects
move with a constant speed when no force
acts on them. He observed that when a marble
rolls down an inclined plane, its velocity
increases [Fig. 9.5(a)]. In the next chapter,
you will learn that the marble falls under the
unbalanced force of gravity as it rolls down
and attains a definite velocity by the time it
reaches the bottom. Its velocity decreases
when it climbs up as shown in Fig. 9.5(b).
Fig. 9.5(c) shows a marble resting on an ideal
frictionless plane inclined on both sides.
Galileo argued that when the marble is
released from left, it would roll down the slope
and go up on the opposite side to the same
height from which it was released. If the
inclinations of the planes on both sides are
equal then the marble will climb the same
distance that it covered while rolling down. If
the angle of inclination of the right-side plane
were gradually decreased, then the marble
would travel further distances till it reaches
the original height. If the right-side plane were
ultimately made horizontal (that is, the slope
is reduced to zero), the marble would continue
to travel forever trying to reach the same
height that it was released from. The
unbalanced forces on the marble in this case
are zero. It thus suggests that an unbalanced
(external) force is required to change the
motion of the marble but no net force is
needed to sustain the uniform motion of the
marble. In practical situations it is difficult
to achieve a zero unbalanced force. This is
because of the presence of the frictional force
acting opposite to the direction of motion.
Thus, in practice the marble stops after
travelling some distance. The effect of the
frictional force may be minimised by using a
smooth marble and a smooth plane and
providing a lubricant on top of the planes.
Fig. 9.5: (a) the downward motion; (b) the upward
motion of a marble on an inclined plane;
and (c) on a double inclined plane.
Newton further studied Galileos ideas on
force and motion and presented three
fundamental laws that govern the motion of
objects. These three laws are known as
Newtons laws of motion. The first law of
motion is stated as:
An object remains in a state of rest or of
uniform motion in a straight line unless
compelled to change that state by an applied
force.
In other words, all objects resist a change
in their state of motion. In a qualitative way,
the tendency of undisturbed objects to stay
at rest or to keep moving with the same
velocity is called inertia. This is why, the first
law of motion is also known as the law of
inertia.
Certain experiences that we come across
while travelling in a motorcar can be
explained on the basis of the law of inertia.
We tend to remain at rest with respect to the
seat until the drives applies a braking force
to stop the motorcar. With the application of
brakes, the car slows down but our body
tends to continue in the same state of motion
because of its inertia. A sudden application
of brakes may thus cause injury to us by
impact or collision with the panels in front.
Safety belts are worn to prevent such
accidents. Safety belts exert a force on our
body to make the forward motion slower. An
opposite experience is encountered when we
are standing in a bus and the bus begins to
move suddenly. Now we tend to fall
backwards. This is because the sudden start
of the bus brings motion to the bus as well
as to our feet in contact with the floor of the
bus. But the rest of our body opposes this
motion because of its inertia.
When a motorcar makes a sharp turn at
a high speed, we tend to get thrown to one
side. This can again be explained on the basis
of the law of inertia. We tend to continue in
our straight-line motion. When an
unbalanced force is applied by the engine to
change the direction of motion of the
motorcar, we slip to one side of the seat due
to the inertia of our body.
The fact that a body will remain at rest
unless acted upon by an unbalanced force
can be illustrated through the following
activities:
Activity ______________ 9.1
Make a pile of similar carom coins on
a table, as shown in Fig. 9.6.
Attempt a sharp horizontal hit at the
bottom of the pile using another carom
coin or the striker. If the hit is strong
enough, the bottom coin moves out
quickly. Once the lowest coin is
removed, the inertia of the other coins
makes them fall vertically on the table.
Galileo Galilei was born
on 15 February 1564 in
Pisa, Italy. Galileo, right
from his childhood, had
interest in mathematics
and natural philosophy.
But his father
Vincenzo Galilei wanted
him to become a medical
doctor. Accordingly,
Galileo enrolled himself
for a medical degree at the
University of Pisa in 1581 which he never
completed because of his real interest in
mathematics. In 1586, he wrote his first
scientific book The Little Balance [La
Balancitta] , in which he described
Archimedes method of finding the relative
densities (or specific gravities) of substances
using a balance. In 1589, in his series of
essays De Motu, he presented his theories
about falling objects using an inclined plane
to slow down the rate of descent.
In 1592, he was appointed professor of
mathematics at the University of Padua in
the Republic of Venice. Here he continued his
observations on the theory of motion and
through his study of inclined planes and the
pendulum, formulated the correct law for
uniformly accelerated objects that the
distance the object moves is proportional to
the square of the time taken.
Galileo was also a remarkable craftsman.
He developed a series of telescopes whose
optical performance was much better than
that of other telescopes available during those
days. Around 1640, he designed the first
pendulum clock. In his book Starry
Messenger on his astronomical discoveries,
Galileo claimed to have seen mountains on
the moon, the milky way made up of tiny
stars, and four small bodies orbiting Jupiter.
In his books Discourse on Floating Bodies
and Letters on the Sunspots, he disclosed
his observations of sunspots.
Using his own telescopes and through his
observations on Saturn and Venus, Galileo
argued that all the planets must orbit the Sun
and not the earth, contrary to what was
believed at that time.
Galileo Galilei
(1564 1642)
Fig. 9.6: Only the carom coin at the bottom of a
pile is removed when a fast moving carom
coin (or striker) hits it.
SCIENCE 118
five-rupees coin if we use a one-rupee coin, we
find that a lesser force is required to perform
the activity. A force that is just enough to
cause a small cart to pick up a large velocity
will produce a negligible change in the motion
of a train. This is because, in comparison to
the cart the train has a much lesser tendency
to change its state of motion. Accordingly, we
say that the train has more inertia than the
cart. Clearly, heavier or more massive objects
offer larger inertia. Quantitatively, the inertia
of an object is measured by its mass. We may
thus relate inertia and mass as follows:
Inertia is the natural tendency of an object to
resist a change in its state of motion or of
rest. The mass of an object is a measure of
its inertia.
uestions
1. Which of the following has more
inertia: (a) a rubber ball and a
stone of the same size? (b) a
bicycle and a train? (c) a five-
rupees coin and a one-rupee coin?
2. In the following example, try to
identify the number of times the
velocity of the ball changes:
A football player kicks a football
to another player of his team who
kicks the football towards the
goal. The goalkeeper of the
opposite team collects the football
and kicks it towards a player of
his own team.
Also identify the agent supplying
the force in each case.
3. Explain why some of the leaves
may get detached from a tree if
we vigorously shake its branch.
4. Why do you fall in the forward
direction when a moving bus
brakes to a stop and fall
backwards when it accelerates
from rest?
9.4 Second Law of Motion
The first law of motion indicates that when
an unbalanced external force acts on an
Activity ______________ 9.2
Set a five-rupee coin on a stiff playing
card covering an empty glass tumbler
standing on a table as shown in
Fig. 9.7.
Give the card a sharp horizontal flick
with a finger. If we do it fast then the
card shoots away, allowing the coin to
fall vertically into the glass tumbler due
to its inertia.
The inertia of the coin tries to maintain
its state of rest even when the card
flows off.
Fig. 9.7: When the playing card is flicked with the
finger the coin placed over it falls in the
tumbler.
Activity ______________ 9.3
Place a water-filled tumbler on a tray.
Hold the tray and turn around as fast
as you can.
We observe that the water spills. Why?
Observe that a groove is provided in a
saucer for placing the tea cup. It prevents
the cup from toppling over in case of sudden
jerks.
9.3 Inertia and Mass
All the examples and activities given so far
illustrate that there is a resistance offered by
an object to change its state of motion. If it is
at rest it tends to remain at rest; if it is moving
it tends to keep moving. This property of an
object is called its inertia. Do all bodies have
the same inertia? We know that it is easier to
push an empty box than a box full of books.
Similarly, if we kick a football it flies away.
But if we kick a stone of the same size with
equal force, it hardly moves. We may, in fact,
get an injury in our foot while doing so!
Similarly, in activity 9.2, instead of a
Q
object, its velocity changes, that is, the object
gets an acceleration. We would now like to
study how the acceleration of an object
depends on the force applied to it and how
we measure a force. Let us recount some
observations from our everyday life. During
the game of table tennis if the ball hits a player
it does not hurt him. On the other hand, when
a fast moving cricket ball hits a spectator, it
may hurt him. A truck at rest does not require
any attention when parked along a roadside.
But a moving truck, even at speeds as low as
5 m s
1
, may kill a person standing in its path.
A small mass, such as a bullet may kill a
person when fired from a gun. These
observations suggest that the impact
produced by the objects depends on their
mass and velocity. Similarly, if an object is to
be accelerated, we know that a greater force
is required to give a greater velocity. In other
words, there appears to exist some quantity
of importance that combines the objects
mass and its velocity. One such property
called momentum was introduced by Newton.
The momentum, p of an object is defined as
the product of its mass, m and velocity, v.
That is,
p = mv (9.1)
Momentum has both direction and
magnitude. Its direction is the same as that
of velocity, v. The SI unit of momentum is
kilogram-metre per second (kg m s
-1
). Since
the application of an unbalanced force brings
a change in the velocity of the object, it is
therefore clear that a force also produces a
change of momentum.
Let us consider a situation in which a car
with a dead battery is to be pushed along a
straight road to give it a speed of 1 m s
-1
,
which is sufficient to start its engine. If one
or two persons give a sudden push
(unbalanced force) to it, it hardly starts. But
a continuous push over some time results in
a gradual acceleration of the car to this speed.
It means that the change of momentum of
the car is not only determined by the
magnitude of the force but also by the time
during which the force is exerted. It may then
also be concluded that the force necessary to
change the momentum of an object depends
on the time rate at which the momentum is
changed.
The second law of motion states that the
rate of change of momentum of an object is
proportional to the applied unbalanced force
in the direction of force.
9.4.1 MATHEMATICAL FORMULATION OF
SECOND LAW OF MOTION
Suppose an object of mass, m is moving along
a straight line with an initial velocity, u. It is
uniformly accelerated to velocity, v in time, t
by the application of a constant force, F
throughout the time, t. The initial and final
momentum of the object will be, p
1
= mu and
p
2
= mv respectively.
The change in momentum p
2
p
1
mv mu
m (v u).
The rate of change of momentum
( ) m v u
t
Or, the applied force,
F
( ) m v u
t
( )
=
km v u
t
F
(9.2)
= k ma (9.3)
Here a [ = (v u)/t ] is the acceleration,
which is the rate of change of velocity. The
quantity, k is a constant of proportionality.
The SI units of mass and acceleration are kg
and m s
-2
respectively. The unit of force is so
chosen that the value of the constant, k
becomes one. For this, one unit of force is
defined as the amount that produces an
acceleration of 1 m s
-2
in an object of 1 kg
mass. That is,
1 unit of force = k (1 kg) (1 m s
-2
).
Thus, the value of k becomes 1. From Eq. (9.3)
F = ma (9.4)
The unit of force is kg m s
-2
or newton,
which has the symbol N. The second law of
SCIENCE 120
motion gives us a method to measure the
force acting on an object as a product of its
mass and acceleration.
The second law of motion is often seen in
action in our everyday life. Have you noticed
that while catching a fast moving cricket ball,
a fielder in the ground gradually pulls his
hands backwards with the moving ball? In
doing so, the fielder increases the time during
which the high velocity of the moving ball
decreases to zero. Thus, the acceleration of
the ball is decreased and therefore the impact
of catching the fast moving ball (Fig. 9.8) is
also reduced. If the ball is stopped suddenly
then its high velocity decreases to zero in a
very short interval of time. Thus, the rate of
change of momentum of the ball will be large.
Therefore, a large force would have to be
applied for holding the catch that may hurt
the palm of the fielder. In a high jump athletic
event, the athletes are made to fall either on
a cushioned bed or on a sand bed. This is to
increase the time of the athletes fall to stop
after making the jump. This decreases the
rate of change of momentum and hence the
force. Try to ponder how a karate player
breaks a slab of ice with a single blow.
The first law of motion can be
mathematically stated from the mathematical
expression for the second law of motion. Eq.
(9.4) is
F = ma
or F
( )
=
m v u
t
(9.5)
or Ft = mv mu
That is, when F = 0, v = u for whatever time,
t is taken. This means that the object will
continue moving with uniform velocity, u
throughout the time, t. If u is zero then v will
also be zero. That is, the object will remain
at rest.
Example 9.1 A constant force acts on an
object of mass 5 kg for a duration of
2 s. It increases the objects velocity
from 3 m s
1
to 7 m s
-1
. Find the
magnitude of the applied force. Now, if
the force was applied for a duration of
5 s, what would be the final velocity of
the object?
Solution:
We have been given that u = 3 m s
1
and v = 7 m s
-1
, t = 2 s and m = 5 kg.
From Eq. (9.5) we have,
F
( )
=
m v u
t
Substitution of values in this relation
gives
F = 5 kg (7 m s
-1
3 m s
-1
)/2 s = 10 N.
Now, if this force is applied for a
duration of 5 s (t = 5 s), then the final
velocity can be calculated by rewriting
Eq. (9.5) as
= +
Ft
v u
m
On substituting the values of u, F, m
and t, we get the final velocity,
v = 13 m s
-1
.
Fig. 9.8: A fielder pulls his hands gradually with the
moving ball while holding a catch.
Example 9.2 Which would require a
greater force accelerating a 2 kg mass
at 5 m s
2
or a 4 kg mass at 2 m s
-2
?
Solution:
From Eq. (9.4), we have F = ma.
Here we have m
1
= 2 kg; a
1
= 5 m s
-2
and m
2
= 4 kg; a
2
= 2 m s
-2
.
Thus, F
1
= m
1
a
1
= 2 kg 5 m s
-2
= 10 N;
and F
2
= m
2
a
2
= 4 kg 2 m s
-2
= 8 N.
F
1
> F
2
.
Thus, accelerating a 2 kg mass at
5 m s
-2
would require a greater force.
Example 9.3 A motorcar is moving with a
velocity of 108 km/h and it takes 4 s to
stop after the brakes are applied.
Calculate the force exerted by the
brakes on the motorcar if its mass along
with the passengers is 1000 kg.
Solution:
The initial velocity of the motorcar
u = 108 km/h
= 108 1000 m/(60 60 s)
= 30 m s
-1
and the final velocity of the motorcar
v = 0 m s
-1
.
The total mass of the motorcar along
with its passengers = 1000 kg and the
time taken to stop the motorcar, t = 4
s. From Eq. (9.5) we have the magnitude
of the force applied by the brakes F as
m(v u)/t.
On substituting the values, we get
F = 1000 kg (0 30) m s
-1
/4 s
= 7500 kg m s
-2
or 7500 N.
The negative sign tells us that the force
exerted by the brakes is opposite to the
direction of motion of the motorcar.
Example 9.4 A force of 5 N gives a mass
m
1
, an acceleration of 10 m s
2
and a
mass m
2
,

an acceleration of 20 m s
-2
.
What acceleration would it give if both
the masses were tied together?
Solution:
From Eq. (9.4) we have m
1
= F/a
1
; and
m
2
= F/a
2
. Here, a
1
= 10 m s
-2
;
a
2
= 20 m s
-2
and F = 5 N.
Thus, m
1
= 5 N/10 m s
-2
= 0.50 kg; and
m
2
= 5 N/20 m s
-2
= 0.25 kg.
If the two masses were tied together,
the total mass, m would be
m = 0.50 kg + 0.25 kg = 0.75 kg.
The acceleration, a produced in the
combined mass by the 5 N force would
be, a = F/m = 5 N/0.75 kg = 6.67 m s
-2
.
Example 9.5 The velocity-time graph of a
ball of mass 20 g moving along a
straight line on a long table is given in
Fig. 9.9.
Fig. 9.9
How much force does the table exert
on the ball to bring it to rest?
Solution:
The initial velocity of the ball is 20 cm s
-1
.
Due to the friction force exerted by the
table, the velocity of the ball decreases
down to zero in 10 s. Thus, u = 20 cm s
1
;
v = 0 cm s
-1
and t = 10 s. Since the
velocity-time graph is a straight line, it is
clear that the ball moves with a constant
acceleration. The acceleration a is,
=
v u
a
t
= (0 cm s
-1
20 cm s
-1
)/10 s
= 2 cm s
-2
= 0.02 m s
-2
.
SCIENCE 122
The force exerted on the ball F is,
F = ma

= (20/1000) kg ( 0.02 m s
-2
)
= 0.0004 N.
The negative sign implies that the
frictional force exerted by the table is
opposite to the direction of motion of
the ball.
9.5 Third Law of Motion
The first two laws of motion tell us how an
applied force changes the motion and provide
us with a method of determining the force.
The third law of motion states that when one
object exerts a force on another object, the
second object instantaneously exerts a force
back on the first. These two forces are always
equal in magnitude but opposite in direction.
These forces act on different objects and never
on the same object. In the game of football
sometimes we, while looking at the football
and trying to kick it with a greater force,
collide with a player of the opposite team.
Both feel hurt because each applies a force
to the other. In other words, there is a pair of
forces and not just one force. The two
opposing forces are also known as action and
reaction forces.
Let us consider two spring balances
connected together as shown in Fig. 9.10. The
fixed end of balance B is attached with a rigid
support, like a wall. When a force is applied
through the free end of spring balance A, it is
observed that both the spring balances show
the same readings on their scales. It means
that the force exerted by spring balance A on
balance B is equal but opposite in direction
to the force exerted by the balance B on
balance A. The force which balance A exerts
on balance B is called the action and the force
of balance B on balance A is called the
reaction. This gives us an alternative
statement of the third law of motion i.e., to
every action there is an equal and opposite
reaction. However, it must be remembered
that the action and reaction always act on
two different objects.
Fig. 9.10: Action and reaction forces are equal and
opposite.
Suppose you are standing at rest and
intend to start walking on a road. You must
accelerate, and this requires a force in
accordance with the second law of motion.
Which is this force? Is it the muscular effort
you exert on the road? Is it in the direction
we intend to move? No, you push the road
below backwards. The road exerts an equal
and opposite reaction force on your feet to
make you move forward.
It is important to note that even though
the action and reaction forces are always
equal in magnitude, these forces may not
produce accelerations of equal magnitudes.
This is because each force acts on a different
object that may have a different mass.
When a gun is fired, it exerts a forward
force on the bullet. The bullet exerts an equal
and opposite reaction force on the gun. This
results in the recoil of the gun (Fig. 9.11).
Since the gun has a much greater mass than
the bullet, the acceleration of the gun is much
less than the acceleration of the bullet. The
third law of motion can also be illustrated
when a sailor jumps out of a rowing boat. As
the sailor jumps forward, the force on the boat
moves it backwards (Fig. 9.12).
Fig. 9.11: A forward force on the bullet and recoil of
the gun.
The cart shown in this activity can be
constructed by using a 12 mm or 18 mm thick
plywood board of about 50 cm 100 cm with
two pairs of hard ball-bearing wheels (skate
wheels are good to use). Skateboards are not
as effective because it is difficult to maintain
straight-line motion.
9.6 Conservation of Momentum
Suppose two objects (two balls A and B, say)
of masses m
A
and m
B
are travelling in the same
direction along a straight line at different
velocities u
A
and u
B
, respectively [Fig. 9.14(a)].
And there are no other external unbalanced
forces acting on them. Let u
A
> u
B
and the
two balls collide with each other as shown in
Fig. 9.14(b). During collision which lasts for
a time t, the ball A exerts a force F
AB
on ball B
and the ball B exerts a force F
BA
on ball A.
Suppose v
A
and v
B
are the velocities of the
two balls A and B after the collision,
respectively [Fig. 9.14(c)].
Activity ______________ 9.4
Request two children to stand on two
separate carts as shown in Fig. 9.13.
Give them a bag full of sand or some
other heavy object. Ask them to play a
game of catch with the bag.
Does each of them receive an
instantaneous reaction as a result of
throwing the sand bag (action)?
You can paint a white line on
cartwheels to observe the motion of the
two carts when the children throw the
bag towards each other.
Fig. 9.12: As the sailor jumps in forward direction,
the boat moves backwards.
Fig. 9.13
Now, place two children on one cart and
one on another cart. The second law of motion
can be seen, as this arrangement would show
different accelerations for the same force.
Fig. 9.14: Conservation of momentum in collision of
two balls.
From Eq. (9.1), the momenta (plural of
momentum) of ball A before and after the
collision are m
A
u
A
and m
A
v
A
, respectively. The
rate of change of its momentum (or F
AB
,

action)
during the collision will be
( )
A A
A
v u
m
t
.
Similarly, the rate of change of momentum
of ball B (= F
BA
or reaction) during the collision
will be
( )
B B
B
v u
m
t
.
According to the third law of motion, the
force F
AB
exerted by ball A on ball B (action)
SCIENCE 124
Activity ______________ 9.6
Take a test tube of good quality glass
material and put a small amount of
water in it. Place a stop cork at the
mouth of it.
Now suspend the test tube horizontally
by two strings or wires as shown in
Fig. 9.16.
Heat the test tube with a burner until
water vaporises and the cork blows out.
Observe that the test tube recoils in
the direction opposite to the direction
of the cork.
and the force F
BA
exerted by the ball B on ball
A (reaction) must be equal and opposite to
each other. Therefore,
F
AB
= F
BA
(9.6)
or
( )
A A
A
v u
m
t
=
( )
B B
B
v u
m
t
.
This gives,
m
A
u
A
+ m
B
u
B
= m
A
v
A
+ m
B
v
B
(9.7)
Since (m
A
u
A
+ m
B
u
B
) is the total momentum
of the two balls A and B before the collision
and (m
A
v
A
+ m
B
v
B
) is their total momentum
after the collision, from Eq. (9.7) we observe
that the total momentum of the two balls
remains unchanged or conserved provided no
other external force acts.
As a result of this ideal collision
experiment, we say that the sum of momenta
of the two objects before collision is equal to
the sum of momenta after the collision
provided there is no external unbalanced
force acting on them. This is known as the
law of conservation of momentum. This
statement can alternatively be given as the
total momentum of the two objects is
unchanged or conserved by the collision.
Activity ______________ 9.5
Take a big rubber balloon and inflate
it fully. Tie its neck using a thread. Also
using adhesive tape, fix a straw on the
surface of this balloon.
Pass a thread through the straw and
hold one end of the thread in your hand
or fix it on the wall.
Ask your friend to hold the other end
of the thread or fix it on a wall at some
distance. This arrangement is shown
in Fig. 9.15.
Now remove the thread tied on the neck
of balloon. Let the air escape from the
mouth of the balloon.
Observe the direction in which the
straw moves.
Fig. 9.15
Fig. 9.16
Also, observe the difference in the
velocity the cork appears to have and
that of the recoiling test tube.
Example 9.6 A bullet of mass 20 g is
horizontally fired with a velocity
150 m s
-1
from a pistol of mass 2 kg.
What is the recoil velocity of the pistol?
Solution:
We have the mass of bullet,
m
1
= 20 g (= 0.02 kg) and the mass of
the pistol, m
2
= 2 kg; initial velocities of
the bullet (u
1
) and pistol (u
2
) = 0,
respectively. The final velocity of the
bullet, v
1
= + 150 m s
-1
. The direction
of bullet is taken from left to right
(positive, by convention, Fig. 9.17). Let
v be the recoil velocity of the pistol.
Total momenta of the pistol and bullet
before the fire, when the gun is at rest
= (2 + 0.02) kg 0 m s
1
= 0 kg m s
1
Total momenta of the pistol and bullet
after it is fired
= 0.02 kg (+ 150 m s
1
)
+ 2 kg v m s
1
= (3 + 2v) kg m s
1
According to the law of conservation of
momentum
Total momenta after the fire = Total
momenta before the fire
3 + 2v = 0
v = 1.5 m s
1
.
Negative sign indicates that the
direction in which the pistol would
recoil is opposite to that of bullet, that
is, right to left.
Example 9.7 A girl of mass 40 kg jumps
with a horizontal velocity of 5 m s
-1
onto
a stationary cart with frictionless
wheels. The mass of the cart is 3 kg.
What is her velocity as the cart starts
moving? Assume that there is no
external unbalanced force working in
the horizontal direction.
Solution:
Let v be the velocity of the girl on the
cart as the cart starts moving.
The total momenta of the girl and cart
before the interaction
= 40 kg 5 m s
1
+ 3 kg 0 m s
1
= 200 kg m s
1
.
Total momenta after the interaction
= (40 + 3) kg v m s
1
= 43 v kg m s
1
.
According to the law of conservation of
momentum, the total momentum is
conserved during the interaction.
That is,
43 v = 200
v = 200/43 = + 4.65 m s
1
.
The girl on cart would move with a
velocity of 4.65 m s
1
in the direction in
which the girl jumped (Fig. 9.18). Fig. 9.17: Recoil of a pistol
Fig. 9.18: The girl jumps onto the cart.
(a) (b)
SCIENCE 126
Example 9.8 Two hockey players of
opposite teams, while trying to hit a
hockey ball on the ground collide and
immediately become entangled. One
has a mass of 60 kg and was moving
with a velocity 5.0 m s
1
while the other
has a mass of 55 kg and was moving
faster with a velocity 6.0 m s
1
towards
the first player. In which direction and
with what velocity will they move after
they become entangled? Assume that
the frictional force acting between the
feet of the two players and ground is
negligible.
Solution:
If v is the velocity of the two entangled
players after the collision, the total
momentum then
= (m
1
+ m
2
) v
= (60 + 55) kg v m s
1
= 115 v kg m s
1
.
Equating the momenta of the system
before and after collision, in accordance
with the law of conservation of
momentum, we get
v = 30/115
= 0.26 m s
1
.
Thus, the two entangled players would
move with velocity 0.26 m s
1
from right
to left, that is, in the direction the
second player was moving before
the collision.
Fig. 9.19: A collision of two hockey players: (a) before collision and (b) after collision.
Let the first player be moving from left
to right. By convention left to right is
taken as the positive direction and thus
right to left is the negative direction (Fig.
9.19). If symbols m and u represent the
mass and initial velocity of the two
players, respectively. Subscripts 1 and
2 in these physical quantities refer to
the two hockey players. Thus,
m
1
= 60 kg; u
1
= + 5 m s
-1
; and
m
2
= 55 kg; u
2
= 6 m s
-1
.
The total momentum of the two players
before the collision
= 60 kg (+ 5 m s
-1
) +
55 kg ( 6 m s
-1
)
= 30 kg m s
-1
uestions
1. If action is always equal to the
reaction, explain how a horse can
pull a cart.
2. Explain, why is it difficult for a
fireman to hold a hose, which
ejects large amounts of water at
a high velocity.
3. From a rifle of mass 4 kg, a bullet
of mass 50 g is fired with an
initial velocity of 35 m s
1
.
Calculate the initial recoil velocity
of the rifle.
Q
4. Two objects of masses 100 g and
200 g are moving along the same
line and direction with velocities
of 2 m s
1
and 1 m s
1
, respectively.
They collide and after the collision,
the first object moves at a velocity
of 1.67 m s
1
. Determine the
velocity of the second object.
What
you have
learnt
First law of motion: An object continues to be in a state of rest
or of uniform motion along a straight line unless acted upon
by an unbalanced force.
The natural tendency of objects to resist a change in their state
of rest or of uniform motion is called inertia.
The mass of an object is a measure of its inertia. Its SI unit is
kilogram (kg).
Force of friction always opposes motion of objects.
Second law of motion: The rate of change of momentum of an
object is proportional to the applied unbalanced force in the
direction of the force.
The SI unit of force is kg m s
2
. This is also known as newton
and represented by the symbol N. A force of one newton
produces an acceleration of 1 m s
2
on an object of mass 1 kg.
The momentum of an object is the product of its mass and
velocity and has the same direction as that of the velocity. Its
SI unit is kg m s
1
.
Third law of motion: To every action, there is an equal and
opposite reaction and they act on two different bodies.
In an isolated system, the total momentum remains conserved.
CONSERVATION LAWS
All conservation laws such as conservation of momentum, energy, angular momentum,
charge etc. are considered to be fundamental laws in physics. These are based on
observations and experiments. It is important to remember that a conservation law cannot
be proved. It can be verified, or disproved, by experiments. An experiment whose result is
in conformity with the law verifies or substantiates the law; it does not prove the law. On
the other hand, a single experiment whose result goes against the law is enough to disprove
it.
The law of conservation of momentum has been deduced from large number of
observations and experiments. This law was formulated nearly three centuries ago. It is
interesting to note that not a single situation has been realised so far, which contradicts
this law. Several experiences of every-day life can be explained on the basis of the law of
conservation of momentum.
SCIENCE 128
Exercises
1. An object experiences a net zero external unbalanced force. Is
it possible for the object to be travelling with a non-zero velocity?
If yes, state the conditions that must be placed on the
magnitude and direction of the velocity. If no, provide a reason.
2. When a carpet is beaten with a stick, dust comes out of it.
Explain.
3. Why is it advised to tie any luggage kept on the roof of a bus
with a rope?
4. A batsman hits a cricket ball which then rolls on a level ground.
After covering a short distance, the ball comes to rest. The ball
slows to a stop because
(a) the batsman did not hit the ball hard enough.
(b) velocity is proportional to the force exerted on the ball.
(c) there is a force on the ball opposing the motion.
(d) there is no unbalanced force on the ball, so the ball would
want to come to rest.
5. A truck starts from rest and rolls down a hill with a constant
acceleration. It travels a distance of 400 m in 20 s. Find its
acceleration. Find the force acting on it if its mass is 7 metric
tonnes (Hint: 1 metric tonne = 1000 kg.)
6. A stone of 1 kg is thrown with a velocity of 20 m s
1
across the
frozen surface of a lake and comes to rest after travelling a
distance of 50 m. What is the force of friction between the
stone and the ice?
7. A 8000 kg engine pulls a train of 5 wagons, each of 2000 kg,
along a horizontal track. If the engine exerts a force of 40000 N
and the track offers a friction force of 5000 N, then calculate:
(a) the net accelerating force;
(b) the acceleration of the train; and
(c) the force of wagon 1 on wagon 2.
8. An automobile vehicle has a mass of 1500 kg. What must be
the force between the vehicle and road if the vehicle is to be
stopped with a negative acceleration of 1.7 m s
2
?
9. What is the momentum of an object of mass m, moving with a
velocity v?
(a) (mv)
2
(b) mv
2
(c) mv
2
(d) mv
10. Using a horizontal force of 200 N, we intend to move a wooden
cabinet across a floor at a constant velocity. What is the friction
force that will be exerted on the cabinet?
11. Two objects, each of mass 1.5 kg, are moving in the same
straight line but in opposite directions. The velocity of each
object is 2.5 m s
-1
before the collision during which they stick
together. What will be the velocity of the combined object after
collision?
12. According to the third law of motion when we push on an object,
the object pushes back on us with an equal and opposite force.
If the object is a massive truck parked along the roadside, it
will probably not move. A student justifies this by answering
that the two opposite and equal forces cancel each other.
Comment on this logic and explain why the truck does not
move.
13. A hockey ball of mass 200 g travelling at 10 m s
1
is struck by
a hockey stick so as to return it along its original path with a
velocity at 5 m s
1
. Calculate the change of momentum occurred
in the motion of the hockey ball by the force applied by the
hockey stick.
14. A bullet of mass 10 g travelling horizontally with a velocity of
150 m s
1
strikes a stationary wooden block and comes to rest
in 0.03 s. Calculate the distance of penetration of the bullet
into the block. Also calculate the magnitude of the force exerted
by the wooden block on the bullet.
15. An object of mass 1 kg travelling in a straight line with a velocity
of 10 m s
1
collides with, and sticks to, a stationary wooden
block of mass 5 kg. Then they both move off together in the
same straight line. Calculate the total momentum just before
the impact and just after the impact. Also, calculate the velocity
of the combined object.
16. An object of mass 100 kg is accelerated uniformly from a velocity
of 5 m s
1
to 8 m s
1
in 6 s. Calculate the initial and final
momentum of the object. Also, find the magnitude of the force
exerted on the object.
17. Akhtar, Kiran and Rahul were riding in a motorcar that was
moving with a high velocity on an expressway when an insect
hit the windshield and got stuck on the windscreen. Akhtar
and Kiran started pondering over the situation. Kiran suggested
that the insect suffered a greater change in momentum as
compared to the change in momentum of the motorcar (because
the change in the velocity of the insect was much more than
that of the motorcar). Akhtar said that since the motorcar was
moving with a larger velocity, it exerted a larger force on the
insect. And as a result the insect died. Rahul while putting an
entirely new explanation said that both the motorcar and the
insect experienced the same force and a change in their
momentum. Comment on these suggestions.
18. How much momentum will a dumb-bell of mass 10 kg transfer
to the floor if it falls from a height of 80 cm? Take its downward
acceleration to be 10 m s
2
.
SCIENCE 130
Additional
Exercises
A1. The following is the distance-time table of an object in motion:
Time in seconds Distance in metres
0 0
1 1
2 8
3 27
4 64
5 125
6 216
7 343
(a) What conclusion can you draw about the acceleration? Is
it constant, increasing, decreasing, or zero?
(b) What do you infer about the forces acting on the object?
A2. Two persons manage to push a motorcar of mass 1200 kg at a
uniform velocity along a level road. The same motorcar can be
pushed by three persons to produce an acceleration of
0.2 m s
-2
. With what force does each person push the motorcar?
(Assume that all persons push the motorcar with the same
muscular effort.)
A3. A hammer of mass 500 g, moving at 50 m s
-1
, strikes a nail.
The nail stops the hammer in a very short time of 0.01 s. What
is the force of the nail on the hammer?
A4. A motorcar of mass 1200 kg is moving along a straight line
with a uniform velocity of 90 km/h. Its velocity is slowed down
to 18 km/h in 4 s by an unbalanced external force. Calculate
the acceleration and change in momentum. Also calculate the
magnitude of the force required.
A5. A large truck and a car, both moving with a velocity of magnitude
v, have a head-on collision and both of them come to a halt
after that. If the collision lasts for 1 s:
(a) Which vehicle experiences the greater force of impact?
(b) Which vehicle experiences the greater change in
momentum?
(c) Which vehicle experiences the greater acceleration?
(d) Why is the car likely to suffer more damage than the truck?
In Chapters 8 and 9, we have learnt about
the motion of objects and force as the cause
of motion. We have learnt that a force is
needed to change the speed or the direction
of motion of an object. We always observe that
an object dropped from a height falls towards
the earth. We know that all the planets go
around the Sun. The moon goes around the
earth. In all these cases, there must be some
force acting on the objects, the planets and
on the moon. Isaac Newton could grasp that
the same force is responsible for all these.
This force is called the gravitational force.
In this chapter we shall learn about
gravitation and the universal law of
gravitation. We shall discuss the motion of
objects under the influence of gravitational
force on the earth. We shall study how the
weight of a body varies from place to place.
We shall also discuss the conditions for
objects to float in liquids.
10.1 Gravitation
We know that the moon goes around the
earth. An object when thrown upwards,
reaches a certain height and then falls
downwards. It is said that when Newton was
sitting under a tree, an apple fell on him. The
fall of the apple made Newton start thinking.
He thought that: if the earth can attract an
apple, can it not attract the moon? Is the force
the same in both cases? He conjectured that
the same type of force is responsible in both
the cases. He argued that at each point of its
orbit, the moon falls towards the earth,
instead of going off in a straight line. So, it
must be attracted by the earth. But we do
not really see the moon falling towards the
earth.
Let us try to understand the motion of
the moon by recalling activity 8.11.
Activity _____________10.1
Take a piece of thread.
Tie a small stone at one end. Hold the
other end of the thread and whirl it
round, as shown in Fig. 10.1.
Note the motion of the stone.
Release the thread.
Again, note the direction of motion of
the stone.
Fig. 10.1: A stone describing a circular path with a
velocity of constant magnitude.
Before the thread is released, the stone
moves in a circular path with a certain speed
and changes direction at every point. The
change in direction involves change in velocity
or acceleration. The force that causes this
acceleration and keeps the body moving along
the circular path is acting towards the centre.
This force is called the centripetal (meaning
centre-seeking) force. In the absence of this
10 10
10 10 10
G G
G GGRAVITATION RAVITATION RAVITATION RAVITATION RAVITATION
Chapter
SCIENCE 132
10.1.1 UNIVERSAL LAW OF GRAVITATION
Every object in the universe attracts every
other object with a force which is proportional
to the product of their masses and inversely
proportional to the square of the distance
between them. The force is along the line
joining the centres of two objects.
force, the stone flies off along a straight line.
This straight line will be a tangent to the
circular path.
M
o
r
e

t
o

k
n
o
w
Tangent to a circle
A straight line that meets the circle
at one and only one point is called a
tangent to the circle. Straight line
ABC is a tangent to the circle at
point B.
The motion of the moon around the earth
is due to the centripetal force. The centripetal
force is provided by the force of attraction of
the earth. If there were no such force, the
moon would pursue a uniform straight line
motion.
It is seen that a falling apple is attracted
towards the earth. Does the apple attract the
earth? If so, we do not see the earth moving
towards an apple. Why?
According to the third law of motion, the
apple does attract the earth. But according
to the second law of motion, for a given force,
acceleration is inversely proportional to the
mass of an object [Eq. (9.4)]. The mass of an
apple is negligibly small compared to that of
the earth. So, we do not see the earth moving
towards the apple. Extend the same argument
for why the earth does not move towards the
moon.
In our solar system, all the planets go
around the Sun. By arguing the same way,
we can say that there exists a force between
the Sun and the planets. From the above facts
Newton concluded that not only does the
earth attract an apple and the moon, but all
objects in the universe attract each other. This
force of attraction between objects is called
the gravitational force.
G
2
Mm
F =
d
Fig. 10.2: The gravitational force between two
uniform objects is directed along the line
joining their centres.
Let two objects A and B of masses M and
m lie at a distance d from each other as shown
in Fig. 10.2. Let the force of attraction between
two objects be F. According to the universal
law of gravitation, the force between two
objects is directly proportional to the product
of their masses. That is,
F
M m (10.1)
And the force between two objects is inversely
proportional to the square of the distance
between them, that is,
2
1
F
d
(10.2)
Combining Eqs. (10.1) and (10.2), we get
F

2
M m
d
(10.3)
or,
G
2
M m
F =
d
(10.4)
where G is the constant of proportionality and
is called the universal gravitation constant.
By multiplying crosswise, Eq. (10.4) gives
F d
2
= G M m
GRAVITATION 133
Isaac Newton was born
in Woolsthorpe near
Grantham, England.
He is generally
regarded as the most
original and
influential theorist in
the history of science.
He was born in a poor
farming family. But he
was not good at
farming. He was sent
to study at Cambridge
University in 1661. In
1665 a plague broke
out in Cambridge and so Newton took a year
off. It was during this year that the incident of
the apple falling on him is said to have
occurred. This incident prompted Newton to
explore the possibility of connecting gravity
with the force that kept the moon in its orbit.
This led him to the universal law of
gravitation. It is remarkable that many great
scientists before him knew of gravity but failed
to realise it.
Newton formulated the well-known laws of
motion. He worked on theories of light and
colour. He designed an astronomical telescope
to carry out astronomical observations.
Newton was also a great mathematician. He
invented a new branch of mathematics, called
calculus. He used it to prove that for objects
outside a sphere of uniform density, the sphere
behaves as if the whole of its mass is
concentrated at its centre. Newton
transformed the structure of physical
science with his three laws of motion and the
universal law of gravitation. As the keystone
of the scientific revolution of the seventeenth
century, Newtons work combined the
contributions of Copernicus, Kepler, Galileo,
and others into a new powerful synthesis.
It is remarkable that though the
gravitational theory could not be verified at
that time, there was hardly any doubt about
its correctness. This is because Newton based
his theory on sound scientific reasoning and
backed it with mathematics. This made the
theory simple and elegant. These qualities are
now recognised as essential requirements of a
good scientific theory.
Isaac Newton
(1642 1727)
How did Newton guess the
inverse-square rule?
There has always been a great interest
in the motion of planets. By the 16th
century, a lot of data on the motion of
planets had been collected by many
astronomers. Based on these data
Johannes Kepler derived three laws,
which govern the motion of planets.
These are called Keplers laws. These are:
1. The orbit of a planet is an ellipse with
the Sun at one of the foci, as shown in
the figure given below. In this figure O
is the position of the Sun.
2. The line joining the planet and the Sun
sweep equal areas in equal intervals
of time. Thus, if the time of travel from
A to B is the same as that from C to D,
then the areas OAB and OCD are
equal.
3. The cube of the mean distance of a
planet from the Sun is proportional to
the square of its orbital period T. Or,
r
3
/T
2
= constant.
It is important to note that Kepler
could not give a theory to explain
the motion of planets. It was Newton
who showed that the cause of the
planetary motion is the gravitational
force that the Sun exerts on them. Newton
used the third law
of Kepler to
calculate the
gravitational force
of attraction. The
gravitational force
of the earth is
weakened by distance. A simple argument
goes like this. We can assume that the
planetary orbits are circular. Suppose the
orbital velocity is v and the radius of the
orbit is r. Then the force acting on an
orbiting planet is given by F
v
2
/r.
If T denotes the period, then v = 2r/T,
so that v
2
r
2
/T
2
.
We can rewrite this as v
2
(1/r)
( r
3
/T
2
). Since r
3
/T
2
is constant by Keplers
third law, we have v
2
1/r. Combining
this with F

v
2
/ r, we get, F

1/ r
2
.
A
B
C
D
O
SCIENCE 134
From Eq. (10.4), the force exerted by
the earth on the moon is
G
2
M m
F =
d
11 2 -2 24 22
8 2
6.7 10 Nm kg 6 10 kg 7.4 10 kg
(3.84 10 m)
= 2.01 10
20
N.
Thus, the force exerted by the earth on
the moon is 2.01 10
20
N.
uestions
1. State the universal law of
gravitation.
2. Write the formula to find the
magnitude of the gravitational
force between the earth and an
object on the surface of the earth.
10.1.2 IMPORTANCE OF THE UNIVERSAL
LAW OF GRAVITATION
The universal law of gravitation successfully
explained several phenomena which were
believed to be unconnected:
(i) the force that binds us to the earth;
(ii) the motion of the moon around the
earth;
(iii) the motion of planets around the Sun;
and
(iv) the tides due to the moon and the Sun.
10.2 Free Fall
Let us try to understand the meaning of free
fall by performing this activity.
Activity _____________10.2
Take a stone.
Throw it upwards.
It reaches a certain height and then it
starts falling down.
We have learnt that the earth attracts
objects towards it. This is due to the
gravitational force. Whenever objects fall
towards the earth under this force alone, we
say that the objects are in free fall. Is there
or
2
G=
F d
M m
(10.5)
The SI unit of G can be obtained by
substituting the units of force, distance and
mass in Eq. (10.5) as N m
2
kg
2
.
The value of G was found out by
Henry Cavendish (1731 1810) by using a
sensitive balance. The accepted value of G is
6.673 10
11
N m
2
kg
2
.
We know that there exists a force of
attraction between any two objects. Compute
the value of this force between you and your
friend sitting closeby. Conclude how you do
not experience this force!
The law is universal in the sense that
it is applicable to all bodies, whether
the bodies are big or small, whether
they are celestial or terrestrial.
Inverse-square
Saying that F is inversely
proportional to the square of d
means, for example, that if d gets
bigger by a factor of 6, F becomes
1
36
times smaller.
Example 10.1 The mass of the earth is
6 10
24
kg and that of the moon is
7.4 10
22
kg. If the distance between
the earth and the moon is 3.8410
5
km,
calculate the force exerted by the earth
on the moon. G = 6.7 10
11
N m
2
kg
-2
.
Solution:
The mass of the earth, M = 6 10
24
kg
The mass of the moon,
m = 7.4 10
22
kg
The distance between the earth and the
moon,
d = 3.84 10
5
km
= 3.84 10
5
1000 m
= 3.84 10
8
m
G = 6.7 10
11
N m
2
kg
2
M
o
r
e

t
o

k
n
o
w
Q
GRAVITATION 135
calculations, we can take g to be more or less
constant on or near the earth. But for objects
far from the earth, the acceleration due to
gravitational force of earth is given by
Eq. (10.7).
10.2.1 TO CALCULATE THE VALUE OF g
To calculate the value of g, we should put
the values of G, M and R in Eq. (10.9),
namely, universal gravitational constant,
G = 6.7 10
11
N m
2
kg
-2
, mass of the earth,
M = 6 10
24
kg, and radius of the earth,
R = 6.4 10
6
m.
G
2
M
g =
R
-11 2 -2 24
6 2
6.7 10 Nm kg 6 10 kg
=
(6.4 10 m)

= 9.8 m s
2
.
Thus, the value of acceleration due to gravity
of the earth, g = 9.8 m s
2
.
10.2.2 MOTION OF OBJECTS UNDER THE
INFLUENCE OF GRAVITATIONAL
FORCE OF THE EARTH
Let us do an activity to understand whether
all objects hollow or solid, big or small, will
fall from a height at the same rate.
Activity _____________10.3
Take a sheet of paper and a stone. Drop
them simultaneously from the first floor
of a building. Observe whether both of
them reach the ground simultaneously.
We see that paper reaches the ground
little later than the stone. This happens
because of air resistance. The air offers
resistance due to friction to the motion
of the falling objects. The resistance
offered by air to the paper is more than
the resistance offered to the stone. If
we do the experiment in a glass jar from
which air has been sucked out, the
paper and the stone would fall at the
same rate.
any change in the velocity of falling objects?
While falling, there is no change in the
direction of motion of the objects. But due to
the earths attraction, there will be a change
in the magnitude of the velocity. Any change
in velocity involves acceleration. Whenever an
object falls towards the earth, an acceleration
is involved. This acceleration is due to the
earths gravitational force. Therefore, this
acceleration is called the acceleration due to
the gravitational force of the earth (or
acceleration due to gravity). It is denoted by
g. The unit of g is the same as that of
acceleration, that is, m s
2
.
We know from the second law of motion
that force is the product of mass and
acceleration. Let the mass of the stone in
activity 10.2 be m. We already know that there
is acceleration involved in falling objects due
to the gravitational force and is denoted by g.
Therefore the magnitude of the gravitational
force F will be equal to the product of mass
and acceleration due to the gravitational
force, that is,
F = m g (10.6)
From Eqs. (10.4) and (10.6) we have
2
= G
M m
m g
d
or
G
2
M
g =
d
(10.7)
where M is the mass of the earth, and d is
the distance between the object and the earth.
Let an object be on or near the surface of
the earth. The distance d in Eq. (10.7) will be
equal to R, the radius of the earth. Thus, for
objects on or near the surface of the earth,
G
2
M m
mg =
R
(10.8)

G
2
M
g =
R
(10.9)
The earth is not a perfect sphere. As the
radius of the earth increases from the poles
to the equator, the value of g becomes greater
at the poles than at the equator. For most
SCIENCE 136
We know that an object experiences
acceleration during free fall. From Eq. (10.9),
this acceleration experienced by an object is
independent of its mass. This means that all
objects hollow or solid, big or small, should
fall at the same rate. According to a story,
Galileo dropped different objects from the top
of the Leaning Tower of Pisa in Italy to prove
the same.
As g is constant near the earth, all the
equations for the uniformly accelerated
motion of objects become valid with
acceleration a replaced by g (see section 8.5).
The equations are:
v = u + at (10.10)
s = ut +
1
2
at
2
(10.11)
v
2
= u
2
+ 2as (10.12)
where u and v are the initial and final
velocities and s is the distance covered in
time, t.
In applying these equations, we will take
acceleration, a to be positive when it is in the
direction of the velocity, that is, in the
direction of motion. The acceleration, a will
be taken as negative when it opposes the
motion.
Example 10.2 A car falls off a ledge and
drops to the ground in 0.5 s. Let
g = 10 m s
2
(for simplifying the
calculations).
(i) What is its speed on striking the
ground?
(ii) What is its average speed during the
0.5 s?
(iii) How high is the ledge from the
ground?
Solution:
Time, t = second
Initial velocity, u = 0 m s
1
Acceleration due to gravity, g = 10 m s
2
Acceleration of the car, a = + 10 m s
2
(downward)
(i) speed v = a t
v = 10 m s
2
0.5 s
= 5 m s
1
(ii) average speed
=
2
u +v
= (0 m s
1
+ 5 m s
1
)/2
= 2.5 m s
1
(iii) distance travelled, s = a t
2
= 10 m s
2
(0.5 s)
2
= 10 m s
2
0.25 s
2
= 1.25 m
Thus,
(i) its speed on striking the ground
= 5 m s
1
(ii) its average speed during the 0.5 s
= 2.5 m s
1
(iii) height of the ledge from the ground
= 1.25 m.
Example 10.3 An object is thrown
vertically upwards and rises to a height
of 10 m. Calculate (i) the velocity with
which the object was thrown upwards
and (ii) the time taken by the object to
reach the highest point.
Solution:
Distance travelled, s = 10 m
Final velocity, v = 0 m s
1
Acceleration due to gravity, g = 9.8 m s
2
Acceleration of the object, a = 9.8 m s
2
(upward motion)
(i) v
2
= u
2
+ 2a s
0 = u
2
+ 2 (9.8 m s
2
)

10 m
u
2
= 2 9.8 10 m
2
s
2
u =
196
m s
-1
u = 14 m s
-1
(ii) v = u + a t
0 = 14 m s
1
9.8 m s
2
t
t = 1.43 s.
Thus,
(i) Initial velocity, u = 14 m s
1
, and
(ii) Time taken, t = 1.43 s.
uestions
1. What do you mean by free fall?
2. What do you mean by acceleration
due to gravity?
Q
GRAVITATION 137
10.3 Mass
We have learnt in the previous chapter that
the mass of an object is the measure of its
inertia (section 9.3). We have also learnt that
greater the mass, the greater is the inertia. It
remains the same whether the object is on
the earth, the moon or even in outer space.
Thus, the mass of an object is constant and
does not change from place to place.
10.4 Weight
We know that the earth attracts every object
with a certain force and this force depends
on the mass (m) of the object and the
acceleration due to the gravity (g). The weight
of an object is the force with which it is
attracted towards the earth.
We know that
F = m a, (10.13)
that is,
F = m g. (10.14)
The force of attraction of the earth on an
object is known as the weight of the object. It
is denoted by W. Substituting the same in
Eq. (10.14), we have
W = m g (10.15)
As the weight of an object is the force with
which it is attracted towards the earth, the
SI unit of weight is the same as that of force,
that is, newton (N). The weight is a force acting
vertically downwards; it has both magnitude
and direction.
We have learnt that the value of g is
constant at a given place. Therefore at a given
place, the weight of an object is directly
proportional to the mass, say m, of the object,
that is, W
m. It is due to this reason that

at a given place, we can use the weight of an
object as a measure of its mass. The mass of
an object remains the same everywhere, that
is, on the earth and on any planet whereas
its weight depends on its location.
10.4.1 WEIGHT OF AN OBJECT ON
THE MOON
We have learnt that the weight of an object
on the earth is the force with which the earth
attracts the object. In the same way, the
weight of an object on the moon is the force
with which the moon attracts that object. The
mass of the moon is less than that of the
earth. Due to this the moon exerts lesser force
of attraction on objects.
Let the mass of an object be m. Let its
weight on the moon be W
m
. Let the mass of
the moon be M
m
and its radius be R
m
.
By applying the universal law of
gravitation, the weight of the object on the
moon will be
2
G

=
m
m
m
M m
W
R
(10.16)
Let the weight of the same object on the
earth be W
e
. The mass of the earth is M and
its radius is R.
Table 10.1
Celestial Mass (kg) Radius (m)
body
Earth 5.98 10
24
6.37 10
6
Moon 7.36 10
22
1.74 10
6
From Eqs. (10.9) and (10.15) we have,
2
G

=
e
M m
W
R
(10.17)
Substituting the values from Table 10.1 in
Eqs. (10.16) and (10.17), we get
( )
22
2
6
7.36 10 kg
G
1.74 10 m

=
m
m
W

10
2.431 10 G =
m
W m (10.18a)
and
11
1.474 10 G =
e
W m (10.18b)
Dividing Eq. (10.18a) by Eq. (10.18b), we get
10
11
2.431 10
1.474 10
m
e
W
W
or
1
0.165
6
m
e
W
W
=
(10.19)
Weight of theobject onthe moon 1
=
Weight of theobject ontheearth 6
Weight of the object on the moon
= (1/6) its weight on the earth.
SCIENCE 138
Example 10.4 Mass of an object is 10 kg.
What is its weight on the earth?
Solution:
Mass, m = 10 kg
Acceleration due to gravity, g = 9.8 m s
2
W = m g
W = 10 kg 9.8 m s
-2
= 98 N
Thus, the weight of the object is 98 N.
Example 10.5 An object weighs 10 N when
measured on the surface of the earth.
What would be its weight when
measured on the surface of the moon?
Solution:
We know,
Weight of object on the moon
= (1/6) its weight on the earth.
That is,
10
6 6
e
m
W
W = =
N.
= 1.67 N.
Thus, the weight of object on the
surface of the moon would be 1.67 N.
uestions
the mass of an object and its
weight?
2. Why is the weight of an object on
the moon
1
6
th
its weight on the
earth?
10.5 Thrust and Pressure
Have you ever wondered why a camel can run
in a desert easily? Why an army tank weighing
more than a thousand tonne rests upon a
continuous chain? Why a truck or a motorbus
has much wider tyres? Why cutting tools have
sharp edges? In order to address these
questions and understand the phenomena
involved, it helps to introduce the concepts
of the net force in a particular direction
(thrust) and the force per unit area (pressure)
acting on the object concerned.
Let us try to understand the meanings of
thrust and pressure by considering the
following situations:
Situation 1: You wish to fix a poster on a
bulletin board, as shown in Fig 10.3. To do
this task you will have to press drawing pins
with your thumb. You apply a force on the
surface area of the head of the pin. This force
is directed perpendicular to the surface area
of the board. This force acts on a smaller area
at the tip of the pin.
Q
Fig. 10.3: To fix a poster, drawing pins are pressed
with the thumb perpendicular to the board.
Situation 2: You stand on loose sand. Your
feet go deep into the sand. Now, lie down on
the sand. You will find that your body will
not go that deep in the sand. In both cases
the force exerted on the sand is the weight of
your body.
GRAVITATION 139
You have learnt that weight is the force
acting vertically downwards. Here the force
is acting perpendicular to the surface of the
sand. The force acting on an object
perpendicular to the surface is called thrust.
When you stand on loose sand, the force,
that is, the weight of your body is acting on
an area equal to area of your feet. When you
lie down, the same force acts on an area equal
to the contact area of your whole body, which
is larger than the area of your feet. Thus, the
effects of forces of the same magnitude on
different areas are different. In the above
cases, thrust is the same. But effects are
different. Therefore the effect of thrust
depends on the area on which it acts.
The effect of thrust on sand is larger while
standing than while lying. The thrust on unit
area is called pressure. Thus,
thrust
Pressure=
area
(10.20)
Substituting the SI unit of thrust and area in
Eq. (10.20), we get the SI unit of pressure as
N/m
2
or N m
2
.
In honour of scientist Blaise Pascal, the
SI unit of pressure is called pascal, denoted
as Pa.
Let us consider a numerical example to
understand the effects of thrust acting on
different areas.
Example 10.6 A block of wood is kept on a
tabletop. The mass of wooden block is
5 kg and its dimensions are 40 cm 20
cm 10 cm. Find the pressure exerted
by the wooden block on the table top if
it is made to lie on the table top with its
sides of dimensions (a) 20 cm 10 cm
and (b) 40 cm 20 cm.
Solution:
The mass of the wooden block = 5 kg
The dimensions
= 40 cm 20 cm 10 cm
Here, the weight of the wooden block
applies a thrust on the table top.
That is,
Thrust = F = m g
= 5 kg 9.8 m s
2
= 49 N
Area of a side = length breadth
= 20 cm 10 cm
= 200 cm
2
= 0.02 m
2
From Eq. (10.20),
Pressure = 2
49N
0.02m
= 2450 N m
-2
.
When the block lies on its side of
dimensions 40 cm 20 cm, it exerts
the same thrust.
Area= length breadth
= 40 cm 20 cm
= 800 cm
2
= 0.08 m
2
From Eq. (10.20),
Pressure = 2
49N
0.08m
= 612.5 N m
2
The pressure exerted by the side 20 cm
10 cm is 2450 N m
2
and by the side
40 cm 20 cm is 612.5 N m
2
.
Thus, the same force acting on a smaller
area exerts a larger pressure, and a smaller
pressure on a larger area. This is the reason
why a nail has a pointed tip, knives have sharp
edges and buildings have wide foundations.
10.5.1 PRESSURE IN FLUIDS
All liquids and gases are fluids. A solid exerts
pressure on a surface due to its weight.
Similarly, fluids have weight, and they also Fig. 10.4
SCIENCE 140
by the water on the bottle is greater than its
weight. Therefore it rises up when released.
To keep the bottle completely immersed,
the upward force on the bottle due to water
must be balanced. This can be achieved by
an externally applied force acting downwards.
This force must at least be equal to the
difference between the upward force and the
weight of the bottle.
The upward force exerted by the water on
the bottle is known as upthrust or buoyant
force. In fact, all objects experience a force of
buoyancy when they are immersed in a fluid.
The magnitude of this buoyant force depends
on the density of the fluid.
10.5.3 WHY OBJECTS FLOAT OR SINK WHEN
PLACED ON THE SURFACE OF WATER?
Let us do the following activities to arrive at
an answer for the above question.
Activity _____________10.5
Take a beaker filled with water.
Take an iron nail and place it on the
surface of the water.
The nail sinks. The force due to the
gravitational attraction of the earth on the
iron nail pulls it downwards. There is an
upthrust of water on the nail, which pushes
it upwards. But the downward force acting
on the nail is greater than the upthrust of
water on the nail. So it sinks (Fig. 10.5).
exert pressure on the base and walls of the
container in which they are enclosed.
Pressure exerted in any confined mass of fluid
is transmitted undiminished in all directions.
10.5.2 BUOYANCY
Have you ever had a swim in a pool and felt
lighter? Have you ever drawn water from a
well and felt that the bucket of water is heavier
when it is out of the water? Have you ever
wondered why a ship made of iron and steel
does not sink in sea water, but whether the
same amount of iron and steel in the form of
a sheet would sink? These questions can be
answered by taking buoyancy in
consideration. Let us understand the
meaning of buoyancy by doing an activity.
Activity _____________10.4
Take an empty plastic bottle. Close the
mouth of the bottle with an airtight
stopper. Put it in a bucket filled with
water. You see that the bottle floats.
Push the bottle into the water. You feel
an upward push. Try to push it further
down. You will find it difficult to push
deeper and deeper. This indicates that
water exerts a force on the bottle in the
upward direction. The upward force
exerted by the water goes on increasing
as the bottle is pushed deeper till it is
completely immersed.
Now, release the bottle. It bounces
back to the surface.
Does the force due to the gravitational
attraction of the earth act on this
bottle? If so, why doesnt the bottle stay
immersed in water after it is released?
How can you immerse the bottle in
water?
The force due to the gravitational
attraction of the earth acts on the bottle in
the downward direction. So the bottle is
pulled downwards. But the water exerts an
upward force on the bottle. Thus, the bottle
is pushed upwards. We have learnt that
weight of an object is the force due to
gravitational attraction of the earth. When the
bottle is immersed, the upward force exerted
Fig. 10.5: An iron nail sinks and a cork floats when
placed on the surface of water.
GRAVITATION 141
Observe what happens to elongation
of the string or the reading on the
balance.
You will find that the elongation of the
string or the reading of the balance decreases
as the stone is gradually lowered in the water.
However, no further change is observed once
the stone gets fully immersed in the water.
What do you infer from the decrease in the
extension of the string or the reading of the
spring balance?
We know that the elongation produced in
the string or the spring balance is due to the
weight of the stone. Since the extension
decreases once the stone is lowered in water,
it means that some force acts on the stone in
upward direction. As a result, the net force
on the string decreases and hence the
elongation also decreases. As discussed
earlier, this upward force exerted by water is
known as the force of buoyancy.
What is the magnitude of the buoyant
force experienced by a body? Is it the same
in all fluids for a given body? Do all bodies in
a given fluid experience the same buoyant
force? The answer to these questions is
Activity _____________10.6
Take a beaker filled with water.
Take a piece of cork and an iron nail of
equal mass.
Place them on the surface of water.
The cork floats while the nail sinks. This
happens because of the difference in their
densities. The density of a substance is
defined as the mass per unit volume. The
density of cork is less than the density of
water. This means that the upthrust of water
on the cork is greater than the weight of the
cork. So it floats (Fig. 10.5).
The density of an iron nail is more than
the density of water. This means that the
upthrust of water on the iron nail is less than
the weight of the nail. So it sinks.
Therefore objects of density less than that
of a liquid float on the liquid. The objects of
density greater than that of a liquid sink in
the liquid.
uestions
1. Why is it difficult to hold a school
bag having a strap made of a thin
and strong string?
2. What do you mean by buoyancy?
3. Why does an object float or sink
when placed on the surface of
water?
10.6 Archimedes Principle
Activity _____________10.7
Take a piece of stone and tie it to one
end of a rubber string or a spring
balance.
Suspend the stone by holding the
balance or the string as shown in
Fig. 10.6 (a).
Note the elongation of the string or the
reading on the spring balance due to
the weight of the stone.
Now, slowly dip the stone in the water
in a container as shown in
Fig. 10.6 (b).
Fig. 10.6: (a) Observe the elongation of the rubber
string due to the weight of a piece of stone
suspended from it in air. (b) The elongation
decreases as the stone is immersed
in water.
(a)
(b)
Q
SCIENCE 142
contained in Archimedes principle, stated as
follows:
When a body is immersed fully or partially
in a fluid, it experiences an upward force that
is equal to the weight of the fluid displaced
by it.
Now, can you explain why a further
decrease in the elongation of the string was
not observed in activity 10.7, as the stone
was fully immersed in water?
Archimedes was a Greek
scientist. He discovered the
principle, subsequently
named after him, after
noticing that the water in a
bathtub overflowed when he
stepped into it. He ran
through the streets shouting
Eureka!, which means I
have got it. This knowledge helped him to
determine the purity of the gold in the crown
made for the king.
His work in the field of Geometry and
Mechanics made him famous. His
understanding of levers, pulleys, wheels-
and-axle helped the Greek army in its war
with Roman army.
Archimedes principle has many
applications. It is used in designing ships and
submarines. Lactometers, which are used to
determine the purity of a sample of milk and
hydrometers used for determining density of
liquids, are based on this principle.
uestions
1. You find your mass to be 42 kg
on a weighing machine. Is your
mass more or less than 42 kg?
2. You have a bag of cotton and an
iron bar, each indicating a mass
of 100 kg when measured on a
weighing machine. In reality, one
is heavier than other. Can you
say which one is heavier
and why?
10.7 Relative Density
As you know, the density of a substance is
defined as mass of a unit volume. The unit of
density is kilogram per metre cube (kg m
3
).
The density of a given substance, under
specified conditions, remains the same.
Therefore the density of a substance is one
of its characteristic properties. It is different
for different substances. For example, the
density of gold is 19300 kg m
-3
while that of
water is 1000 kg m
-3
. The density of a given
sample of a substance can help us to
determine its purity.
It is often convenient to express density
of a substance in comparison with that of
water. The relative density of a substance is
the ratio of its density to that of water:
Density of a substance
Relativedensity =
Density of water
Since the relative density is a ratio of
similar quantities, it has no unit.
Example 10.7 Relative density of silver is
10.8. The density of water is 10
3
kg m
3
.
What is the density of silver in SI unit?
Solution:
Relative density of silver = 10.8
Relative density
=
Density of silver
Density of water
Density of silver
= Relative density of silver
density of water
= 10.8 10
3
kg m
3
.
Archimedes
Q
GRAVITATION 143
What
you have
learnt
The law of gravitation states that the force of attraction between
any two objects is proportional to the product of their masses
and inversely proportional to the square of the distance between
them. The law applies to objects anywhere in the universe.
Such a law is said to be universal.
Gravitation is a weak force unless large masses are involved.
Force of gravitation due to the earth is called gravity.
The force of gravity decreases with altitude. It also varies on
the surface of the earth, decreasing from poles to the equator.
The weight of a body is the force with which the earth
attracts it.
The weight is equal to the product of mass and acceleration
due to gravity.
The weight may vary from place to place but the mass stays
constant.
All objects experience a force of buoyancy when they are
immersed in a fluid.
Objects having density less than that of the liquid in which
they are immersed, float on the surface of the liquid. If the
density of the object is more than the density of the liquid in
which it is immersed then it sinks in the liquid.
Exercises
1. How does the force of gravitation between two objects change
when the distance between them is reduced to half ?
2. Gravitational force acts on all objects in proportion to their
masses. Why then, a heavy object does not fall faster than a
light object?
3. What is the magnitude of the gravitational force between the
earth and a 1 kg object on its surface? (Mass of the earth is
6 10
24
kg and radius of the earth is 6.4 10
6
m.)
4. The earth and the moon are attracted to each other by
gravitational force. Does the earth attract the moon with a force
that is greater or smaller or the same as the force with which
the moon attracts the earth? Why?
5. If the moon attracts the earth, why does the earth not move
towards the moon?
SCIENCE 144
6. What happens to the force between two objects, if
(i) the mass of one object is doubled?
(ii) the distance between the objects is doubled and tripled?
(iii) the masses of both objects are doubled?
7. What is the importance of universal law of gravitation?
8. What is the acceleration of free fall?
9. What do we call the gravitational force between the earth and
an object?
10. Amit buys few grams of gold at the poles as per the instruction
of one of his friends. He hands over the same when he meets
him at the equator. Will the friend agree with the weight of gold
bought? If not, why? [Hint: The value of g is greater at the
poles than at the equator.]
11. Why will a sheet of paper fall slower than one that is crumpled
into a ball?
12. Gravitational force on the surface of the moon is only
1
6
as
strong as gravitational force on the earth. What is the weight
in newtons of a 10 kg object on the moon and on the earth?
13. A ball is thrown vertically upwards with a velocity of 49 m/s.
Calculate
(i) the maximum height to which it rises,
(ii) the total time it takes to return to the surface of the earth.
14. A stone is released from the top of a tower of height 19.6 m.
Calculate its final velocity.
15. A stone is thrown vertically upward with an initial velocity of
40 m/s. Taking g = 10 m/s
2
, find the maximum height reached
by the stone. What is the net displacement and the total
distance covered by the stone?
16. Calculate the force of gravitation between the earth and the
Sun, given that the mass of the earth = 6 10
24
kg and of the
Sun = 2 10
30
kg. The average distance between the two is
1.5 10
11
m.
17. A stone is allowed to fall from the top of a tower 100 m high
and at the same time another stone is projected vertically
upwards from the ground with a velocity of 25 m/s. Calculate
when and where the two stones will meet.
18. A ball thrown up vertically returns to the thrower after 6 s.
Find
(a) the velocity with which it was thrown up,
(b) the maximum height it reaches, and
(c) its position after 4 s.
GRAVITATION 145
19. In what direction does the buoyant force on an object immersed
in a liquid act?
20. Why does a block of plastic released under water come up to
the surface of water?
21. The volume of 50 g of a substance is 20 cm
3
. If the density of
water is 1 g cm
3
, will the substance float or sink?
22. The volume of a 500 g sealed packet is 350 cm
3
. Will the packet
float or sink in water if the density of water is 1 g cm
3
? What
will be the mass of the water displaced by this packet?
In the previous few chapters we have talked
about ways of describing the motion of
objects, the cause of motion and gravitation.
Another concept that helps us understand and
interpret many natural phenomena is work.
Closely related to work are energy and power.
In this chapter we shall study these concepts.
All living beings need food. Living beings
have to perform several basic activities to
survive. We call such activities life processes.
The energy for these processes comes from
food. We need energy for other activities like
playing, singing, reading, writing, thinking,
jumping, cycling and running. Activities that
are strenuous require more energy.
Animals too get engaged in activities. For
example, they may jump and run. They have
to fight, move away from enemies, find food
or find a safe place to live. Also, we engage
some animals to lift weights, carry loads, pull
carts or plough fields. All such activities
require energy.
Think of machines. List the machines that
you have come across. What do they need for
their working? Why do some engines require
fuel like petrol and diesel? Why do living
beings and machines need energy?
11.1 Work
What is work? There is a difference in the
way we use the term work in day-to-day life
and the way we use it in science. To make
this point clear let us consider a few examples.
11.1.1 NOT MUCH WORK IN SPITE OF
WORKING HARD!
Kamali is preparing for examinations. She
spends lot of time in studies. She reads books,
draws diagrams, organises her thoughts,
collects question papers, attends classes,
discusses problems with her friends, and
performs experiments. She expends a lot of
energy on these activities. In common
parlance, she is working hard. All this hard
work may involve very little work if we go by
the scientific definition of work.
You are working hard to push a huge rock.
Let us say the rock does not move despite all
the effort. You get completely exhausted.
However, you have not done any work on the
rock as there is no displacement of the rock.
You stand still for a few minutes with a
heavy load on your head. You get tired. You
have exerted yourself and have spent quite a
bit of your energy. Are you doing work on the
load? The way we understand the term work
in science, work is not done.
You climb up the steps of a staircase and
reach the second floor of a building just to
see the landscape from there. You may even
climb up a tall tree. If we apply the scientific
definition, these activities involve a lot of work.
In day-to-day life, we consider any useful
physical or mental labour as work. Activities
like playing in a field, talking with friends,
humming a tune, watching a movie, attending
a function are sometimes not considered to
be work. What constitutes work depends
on the way we define it. We use and define
the term work differently in science. To
understand this let us do the following
activities:
Activity _____________11.1
We have discussed in the above
paragraphs a number of activities
which we normally consider to be work
11 11
11 11 11
W W
W WWORK ORK ORK ORK ORK
AND AND AND AND AND E E
E EENERGY NERGY NERGY NERGY NERGY
Chapter
Activity _____________11.3
Think of situations when the object is
not displaced in spite of a force acting
on it.
Also think of situations when an object
gets displaced in the absence of a force
acting on it.
List all the situations that you can
think of for each.
Discuss with your friends whether
work is done in these situations.
11.1.3 WORK DONE BY A CONSTANT FORCE
How is work defined in science? To
understand this, we shall first consider the
case when the force is acting in the direction
of displacement.
Let a constant force, F act on an object.
Let the object be displaced through a
distance, s in the direction of the force (Fig.
11.1). Let W be the work done. We define work
to be equal to the product of the force and
displacement.
Work done = force displacement
W = F s (11.1)
in day-to-day life. For each of these
activities, ask the following questions
and answer them:
(i) What is the work being done on?
(ii) What is happening to the object?
(iii) Who (what) is doing the work?
11.1.2 SCIENTIFIC CONCEPTION OF WORK
To understand the way we view work and
define work from the point of view of science,
let us consider some situations:
Push a pebble lying on a surface. The
pebble moves through a distance. You exerted
a force on the pebble and the pebble got
displaced. In this situation work is done.
A girl pulls a trolley and the trolley moves
through a distance. The girl has exerted a
force on the trolley and it is displaced.
Therefore, work is done.
Lift a book through a height. To do this
you must apply a force. The book rises up.
There is a force applied on the book and the
book has moved. Hence, work is done.
A closer look at the above situations
reveals that two conditions need to be
satisfied for work to be done: (i) a force should
act on an object, and (ii) the object must be
displaced.
If any one of the above conditions does
not exist, work is not done. This is the way
we view work in science.
A bullock is pulling a cart. The cart
moves. There is a force on the cart and the
cart has moved. Do you think that work is
done in this situation?
Activity _____________11.2
Think of some situations from your
daily life involving work.
List them.
Discuss with your friends whether
work is being done in each situation.
Try to reason out your response.
If work is done, which is the force acting
on the object?
What is the object on which the work
is done?
What happens to the object on which
work is done?
Fig. 11.1
Thus, work done by a force acting on an
object is equal to the magnitude of the force
multiplied by the distance moved in the
direction of the force. Work has only
magnitude and no direction.
In Eq. (11.1), if F = 1 N and s = 1 m then
the work done by the force will be 1 N m.
Here the unit of work is newton metre (N m)
or joule (J). Thus 1 J is the amount of work
WORK AND ENERGY 147
SCIENCE 148
done on an object when a force of 1 N
displaces it by 1 m along the line of action of
the force.
Look at Eq. (11.1) carefully. What is the
work done when the force on the object is
zero? What would be the work done when
the displacement of the object is zero? Refer
to the conditions that are to be satisfied to
say that work is done.
Example 11.1 A force of 5 N is acting on
an object. The object is displaced
through 2 m in the direction of the force
(Fig. 11.2). If the force acts on the object
all through the displacement, then
work done is 5 N 2 m =10 N m or
10 J.
Fig. 11.4
Consider a situation in which an object
is being displaced by the action of forces and
we identify one of the forces, F acting opposite
to the direction of the displacement s, that
is, the angle between the two directions is
180. In such a situation, the work done by
the force, F is taken as negative and denoted
by the minus sign. The work done by the force
is F (s) or (F s).
It is clear from the above discussion that
the work done by a force can be either positive
or negative. To understand this, let us do the
following activity:
Activity _____________11.4
Lift an object up. Work is done by the
force exerted by you on the object. The
object moves upwards. The force you
exerted is in the direction of
displacement. However, there is the
force of gravity acting on the object.
Which one of these forces is doing
positive work?
Which one is doing negative work?
Give reasons.
Work done is negative when the force acts
opposite to the direction of displacement.
Work done is positive when the force is in the
direction of displacement.
Example 11.2 A porter lifts a luggage of
15 kg from the ground and puts it on
his head 1.5 m above the ground.
Calculate the work done by him on the
luggage.
Solution:
Mass of luggage, m = 15 kg and
displacement, s = 1.5 m.
Fig. 11.2
uestion
1. A force of 7 N acts on an object.
The displacement is, say 8 m, in
the direction of the force
(Fig. 11.3). Let us take it that the
force acts on the object through
the displacement. What is the
work done in this case?
Fig. 11.3
Consider another situation in which the
force and the displacement are in the same
direction: a baby pulling a toy car parallel to
the ground, as shown in Fig. 11.4. The baby
has exerted a force in the direction of
displacement of the car. In this situation, the
work done will be equal to the product of the
force and displacement. In such situations,
the work done by the force is taken as positive.
Q
WORK AND ENERGY 149
raised hammer falls on a nail placed on a
piece of wood, it drives the nail into the wood.
We have also observed children winding a toy
(such as a toy car) and when the toy is placed
on the floor, it starts moving. When a balloon
is filled with air and we press it we notice a
change in its shape. As long as we press it
gently, it can come back to its original shape
when the force is withdrawn. However, if we
press the balloon hard, it can even explode
producing a blasting sound. In all these
examples, the objects acquire, through
different means, the capability of doing work.
An object having a capability to do work is
said to possess energy. The object which does
the work loses energy and the object on which
the work is done gains energy.
How does an object with energy do work?
An object that possesses energy can exert a
force on another object. When this happens,
energy is transferred from the former to the
latter. The second object may move as it
receives energy and therefore do some work.
Thus, the first object had a capacity to do
work. This implies that any object that
possesses energy can do work.
The energy possessed by an object is thus
measured in terms of its capacity of doing
work. The unit of energy is, therefore, the same
as that of work, that is, joule (J). 1 J is the
energy required to do 1 joule of work.
Sometimes a larger unit of energy called kilo
joule (kJ) is used. 1 kJ equals 1000 J.
11.2.1 FORMS OF ENERGY
Luckily the world we live in provides energy
in many different forms. The various forms
include potential energy, kinetic energy, heat
energy, chemical energy, electrical energy and
light energy.
Think it over !
How do you know that some entity is a
form of energy? Discuss with your friends
and teachers.
Work done, W = F s = mg s
= 15 kg 10 m s
-2
1.5 m
= 225 kg m s
-2
m
= 225 N m = 225 J
Work done is 225 J.
uestions
1. When do we say that work is
done?
2. Write an expression for the work
done when a force is acting on
an object in the direction of its
displacement.
3. Define 1 J of work.
4. A pair of bullocks exerts a force
of 140 N on a plough. The field
being ploughed is 15 m long.
How much work is done in
ploughing the length of the field?
11.2 Energy
Life is impossible without energy. The demand
for energy is ever increasing. Where do we
get energy from? The Sun is the biggest
natural source of energy to us. Many of our
energy sources are derived from the Sun. We
can also get energy from the nuclei of atoms,
the interior of the earth, and the tides. Can
you think of other sources of energy?
Activity _____________11.5
A few sources of energy are listed above.
There are many other sources of
energy. List them.
Discuss in small groups how certain
sources of energy are due to the Sun.
Are there sources of energy which are
not due to the Sun?
The word energy is very often used in our
daily life, but in science we give it a definite
and precise meaning. Let us consider the
following examples: when a fast moving
cricket ball hits a stationary wicket, the wicket
is thrown away. Similarly, an object when
raised to a certain height gets the capability
to do work. You must have seen that when a
Q
SCIENCE 150
Fig. 11.5
The trolley moves forward and hits the
wooden block.
Fix a stop on the table in such a
manner that the trolley stops after
hitting the block. The block gets
displaced.
Note down the displacement of the
block. This means work is done on the
block by the trolley as the block has
gained energy.
From where does this energy come?
Repeat this activity by increasing the
mass on the pan. In which case is the
displacement more?
In which case is the work done more?
In this activity, the moving trolley does
work and hence it possesses energy.
A moving object can do work. An object
moving faster can do more work than an
identical object moving relatively slow. A
moving bullet, blowing wind, a rotating wheel,
a speeding stone can do work. How does a
bullet pierce the target? How does the wind
move the blades of a windmill? Objects in
motion possess energy. We call this energy
kinetic energy.
A falling coconut, a speeding car, a rolling
stone, a flying aircraft, flowing water, blowing
wind, a running athlete etc. possess kinetic
energy. In short, kinetic energy is the energy
possessed by an object due to its motion. The
kinetic energy of an object increases with its
speed.
How much energy is possessed by a
moving body by virtue of its motion? By
definition, we say that the kinetic energy of a
body moving with a certain velocity is equal
to the work done on it to make it acquire that
velocity.
11.2.2 KINETIC ENERGY
Activity _____________11.6
Take a heavy ball. Drop it on a thick
bed of sand. A wet bed of sand would
be better. Drop the ball on the sand
bed from height of about 25 cm. The
ball creates a depression.
Repeat this activity from heights of
50 cm, 1m and 1.5 m.
Ensure that all the depressions are
distinctly visible.
Mark the depressions to indicate the
height from which the ball was
dropped.
Compare their depths.
Which one of them is deepest?
Which one is shallowest? Why?
What has caused the ball to make a
deeper dent?
Discuss and analyse.
Activity _____________11.7
Set up the apparatus as shown in
Fig. 11.5.
Place a wooden block of known mass
in front of the trolley at a convenient
fixed distance.
Place a known mass on the pan so that
the trolley starts moving.
James Prescott
Joule was an
o u t s t a n d i n g
British physicist.
He is best known
for his research in
electricity and
thermodynamics.
Amongst other
things, he
formulated a law
for the heating
effect of electric
current. He also
verified experimentally the law of
conservation of energy and discovered
the value of the mechanical equivalent
of heat. The unit of energy and work
called joule, is named after him.
James Prescott Joule
(1818 1889)
WORK AND ENERGY 151
Let us now express the kinetic energy of
an object in the form of an equation. Consider
an object of mass, m moving with a uniform
velocity, u. Let it now be displaced through a
distance s when a constant force, F acts on it
in the direction of its displacement. From
Eq. (11.1), the work done, W is F s. The work
done on the object will cause a change in its
velocity. Let its velocity change from u to v.
Let a be the acceleration produced.
In section 8.5, we studied three equations
of motion. The relation connecting the initial
velocity (u) and final velocity (v) of an object
moving with a uniform acceleration a, and
the displacement, s is
v
2
u
2
= 2a s (8.7)
This gives
2 2
v u
s =
2a
(11.2)
From section 9.4, we know F = m a. Thus,
using (Eq. 11.2) in Eq. (11.1), we can write
the work done by the force, F as

2 2
v - u
W = m a
2a
or
( )
1
2
2 2
W = m v u
(11.3)
If the object is starting from its stationary
position, that is, u = 0, then
1
2
2
W = m v
(11.4)
It is clear that the work done is equal to the
change in the kinetic energy of an object.
If u = 0, the work done will be
1
2
2
m v
.
Thus, the kinetic energy possessed by an
object of mass, m and moving with a uniform
velocity, v is
1
2
2
k
E = m v
(11.5)
Example 11.3 An object of mass 15 kg is
moving with a uniform velocity of
4 m s
1
. What is the kinetic energy
possessed by the object?
Solution:
Mass of the object, m = 15 kg, velocity
of the object, v = 4 m s
1
.
From Eq. (11.5),
1
2
2
k
E = m v
=
1
2
15 kg 4 m s
1
4 m s
1
= 120 J
The kinetic energy of the object is 120 J.
Example 11.4 What is the work to be done
to increase the velocity of a car from
30 km h
1
to 60 km h
1
if the mass of
the car is 1500 kg?
Solution:
Mass of the car, m =1500 kg,
initial velocity of car, u = 30 km h
1
=
30 1000m
60 60s
= 8.33 m s
1
.
Similarly, the final velocity of the car,
v = 60 km h
1
= 16.67 m s
1
.
Therefore, the initial kinetic energy of
the car,
E
ki

1
2
2
= m u
=
1
2
1500 kg (8.33 m s
1
)
2
= 52041.68 J.
The final kinetic energy of the car,
E
kf

=
1
2
1500 kg (16.67 m s
1
)
2
= 208416.68 J.
Thus, the work done = Change in
kinetic energy
= E
kf
E
ki
= 156375 J.
SCIENCE 152
uestions
1. What is the kinetic energy of an
object?
2. Write an expression for the kinetic
energy of an object.
3. The kinetic energy of an object of
mass, m moving with a velocity
of 5 m s
1
is 25 J. What will be its
kinetic energy when its velocity
is doubled? What will be its
kinetic energy when its velocity
is increased three times?
11.2.3 POTENTIAL ENERGY
Activity _____________11.8
Take a rubber band.
Hold it at one end and pull from the
other. The band stretches.
Release the band at one of the ends.
What happens?
The band will tend to regain its original
length. Obviously the band had
acquired energy in its stretched
position.
How did it acquire energy when
stretched?
Activity _____________11.9
Take a slinky as shown below.
Ask a friend to hold one of its ends.
You hold the other end and move away
from your friend. Now you release the
slinky.
Activity ____________11.11
Lift an object through a certain height.
The object can now do work. It begins
to fall when released.
This implies that it has acquired some
energy. If raised to a greater height it
can do more work and hence possesses
more energy.
From where did it get the energy? Think
and discuss.
In the above situations, the energy gets
stored due to the work done on the object.
The energy transferred to an object is stored
as potential energy if it is not used to cause a
change in the velocity or speed of the object.
You transfer energy when you stretch a
rubber band. The energy transferred to the
band is its potential energy. You do work while
winding the key of a toy car. The energy
transferred to the spring inside is stored as
potential energy. The potential energy
possessed by the object is the energy present
in it by virtue of its position or configuration.
Activity ____________11.12
Take a bamboo stick and make a bow
as shown in Fig. 11.6.
Place an arrow made of a light stick on
it with one end supported by the
stretched string.
Now stretch the string and release the
arrow.
Notice the arrow flying off the bow.
Notice the change in the shape of the
bow.
The potential energy stored in the bow
due to the change of shape is thus used
in the form of kinetic energy in
throwing off the arrow.
Q
Fig.11.6: An arrow and the stretched string
on the bow.
What happened?
How did the slinky acquire energy when
stretched?
Would the slinky acquire energy when
it is compressed?
Activity ____________11.10
Take a toy car. Wind it using its key.
Place the car on the ground.
Did it move?
From where did it acquire energy?
Does the energy acquired depend on
the number of windings?
How can you test this?
WORK AND ENERGY 153
11.2.4 POTENTIAL ENERGY OF AN OBJECT
AT A HEIGHT
An object increases its energy when raised
through a height. This is because work is
done on it against gravity while it is being
raised. The energy present in such an object
is the gravitational potential energy.
The gravitational potential energy of an
object at a point above the ground is defined
as the work done in raising it from the ground
to that point against gravity.
It is easy to arrive at an expression for
the gravitational potential energy of an object
at a height.
Fig. 11.7
Consider an object of mass, m. Let it be
raised through a height, h from the ground.
A force is required to do this. The minimum
force required to raise the object is equal to
the weight of the object, mg. The object gains
energy equal to the work done on it. Let the
work done on the object against gravity be
W. That is,
work done, W = force displacement
= mg h
= mgh
Since work done on the object is equal to
mgh, an energy equal to mgh units is gained
by the object. This is the potential energy (E
P
)
of the object.
E
p
= mgh (11.7)
M
o
r
e

t
o

k
n
o
w
The potential energy of an object at
a height depends on the ground
level or the zero level you choose.
An object in a given position can
have a certain potential energy with
respect to one level and a different
value of potential energy with
respect to another level.
It is useful to note that the work done by
gravity depends on the difference in vertical
heights of the initial and final positions of
the object and not on the path along which
the object is moved. Fig. 11.8 shows a case
where a block is raised from position A to B
by taking two different paths. Let the height
AB = h. In both the situations the work done
on the object is mgh.
Fig. 11.8
Example 11.5 Find the energy possessed
by an object of mass 10 kg when it is at
a height of 6 m above the ground. Given,
g = 9.8 m s
2
.
Solution:
Mass of the object, m = 10 kg,
displacement (height), h = 6 m, and
acceleration due to gravity, g = 9.8 m s
2
.
From Eq. (11.6),
Potential energy = mgh
= 10 kg 9.8 m s
2
6 m
= 588 J.
The potential energy is 588 J.
SCIENCE 154
Example 11.6 An object of mass 12 kg is
at a certain height above the ground.
If the potential energy of the object is
480 J, find the height at which the
object is with respect to the ground.
Given, g = 10 m s
2
.
Solution:
Mass of the object, m = 12 kg,
potential energy, E
p
= 480 J.
E
p
= mgh
480 J = 12 kg 10 m s
2
h
h = 2
480 J
120 kg ms
= 4 m.
The object is at the height of 4 m.
11.2.5 ARE VARIOUS ENERGY FORMS
INTERCONVERTIBLE?
Can we convert energy from one form to
another? We find in nature a number of
instances of conversion of energy from one
form to another.
Activity ____________11.13
Sit in small groups.
Discuss the various ways of energy
conversion in nature.
Discuss following questions in your
group:
(a) How do green plants produce food?
(b) Where do they get their energy from?
(c) Why does the air move from place
to place?
(d) How are fuels, such as coal and
petroleum formed?
(e) What kinds of energy conversions
sustain the water cycle?
Activity ____________11.14
Many of the human activities and the
gadgets we use involve conversion of
energy from one form to another.
Make a list of such activities and
gadgets.
Identify in each activity/gadget the
kind of energy conversion that takes
place.
11.2.6 LAW OF CONSERVATION OF ENERGY
In activities 11.13 and 11.14, we learnt that
the form of energy can be changed from one
form to another. What happens to the total
energy of a system during or after the
process? Whenever energy gets transformed,
the total energy remains unchanged. This is
the law of conservation of energy. According
to this law, energy can only be converted from
one form to another; it can neither be created
or destroyed. The total energy before and after
the transformation remains the same. The
law of conservation of energy is valid
in all situations and for all kinds of
transformations.
Consider a simple example. Let an object
of mass, m be made to fall freely from a
height, h. At the start, the potential energy is
mgh and kinetic energy is zero. Why is the
kinetic energy zero? It is zero because its
velocity is zero. The total energy of the object
is thus mgh. As it falls, its potential energy
will change into kinetic energy. If v is the
velocity of the object at a given instant, the
kinetic energy would be mv
2
. As the fall of
the object continues, the potential energy
would decrease while the kinetic energy would
increase. When the object is about to reach
the ground, h = 0 and v will be the highest.
Therefore, the kinetic energy would be the
largest and potential energy the least.
However, the sum of the potential energy and
kinetic energy of the object would be the same
at all points. That is,
potential energy + kinetic energy = constant
or
1
constant.
2
2
mgh + mv =
(11.7)
The sum of kinetic energy and potential
energy of an object is its total mechanical
energy.
We find that during the free fall of the
object, the decrease in potential energy, at
any point in its path, appears as an equal
amount of increase in kinetic energy. (Here
the effect of air resistance on the motion of
the object has been ignored.) There is thus a
continual transformation of gravitational
potential energy into kinetic energy.
WORK AND ENERGY 155
A stronger person may do certain work in
relatively less time. A more powerful vehicle
would complete a journey in a shorter time
than a less powerful one. We talk of the power
of machines like motorbikes and motorcars.
The speed with which these vehicles change
energy or do work is a basis for their
classification. Power measures the speed of
work done, that is, how fast or slow work is
done. Power is defined as the rate of doing
work or the rate of transfer of energy. If an
agent does a work W in time t, then power is
given by:
Power = work/time
or
W
P =
t
(11.8)
The unit of power is watt [in honour of
James Watt (1736 1819)] having the symbol
W. 1 watt is the power of an agent, which
does work at the rate of 1 joule per second.
We can also say that power is 1 W when the
rate of consumption of energy is 1 J s
1
.
1 watt = 1 joule/second or 1 W = 1 J s
1
.
We express larger rates of energy transfer in
kilowatts (kW).
1 kilowatt = 1000 watts
1 kW = 1000 W
1 kW = 1000 J s
1
.
The power of an agent may vary with time.
This means that the agent may be doing work
at different rates at different intervals of time.
Therefore the concept of average power is
useful. We obtain average power by dividing
the total energy consumed by the total time
taken.
Example 11.7 Two girls, each of weight
400 N climb up a rope through a height
of 8 m. We name one of the girls A and
the other B. Girl A takes 20 s while B
takes 50 s to accomplish this task.
What is the power expended by
each girl?
Solution:
(i) Power expended by girl A:
Weight of the girl, mg = 400 N
Activity ____________11.15
An object of mass 20 kg is dropped from
a height of 4 m. Fill in the blanks in
the following table by computing the
potential energy and kinetic energy in
each case.
Height at Potential Kinetic E
p
+ E
k
which object energy energy
is located (E
p
= mgh) (E
k
= mv
2
/2)
m J J J
4
3
2
1
Just above
the ground
For simplifying the calculations, take
the value of g as 10 m s
2
.
Think it over !
What would have happened if nature had
not allowed the transformation of energy?
There is a view that life could not have
been possible without transformation of
energy. Do you agree with this?
11.3 Rate of Doing Work
Do all of us work at the same rate? Do
machines consume or transfer energy at the
same rate? Agents that transfer energy do
work at different rates. Let us understand this
from the following activity:
Activity ____________11.16
Consider two children, say A and B.
Let us say they weigh the same. Both
start climbing up a rope separately.
Both reach a height of 8 m. Let us say
A takes 15 s while B takes 20 s to
accomplish the task.
What is the work done by each?
The work done is the same. However,
A has taken less time than B to do
the work.
Who has done more work in a given
time, say in 1 s?
SCIENCE 156
uestions
1. What is power?
2. Define 1 watt of power.
3. A lamp consumes 1000 J of
electrical energy in 10 s. What is
its power?
4. Define average power.
11.3.1 COMMERCIAL UNIT OF ENERGY
The unit joule is too small and hence is
inconvenient to express large quantities of
energy. We use a bigger unit of energy called
kilowatt hour (kW h).
What is 1 kW h? Let us say we have a
machine that uses 1000 J of energy every
second. If this machine is used continuously
for one hour, it will consume 1 kW h of energy.
Thus, 1 kW h is the energy used in one hour
at the rate of 1000 J s
1
(or 1 kW).
1 kW h = 1 kW 1 h
= 1000 W 3600 s
= 3600000 J
1 kW h = 3.6 10
6
J.
The energy used in households, industries
and commercial establishments are usually
expressed in kilowatt hour. For example,
electrical energy used during a month is
expressed in terms of units. Here, 1 unit
means 1 kilowatt hour.
Example 11.9 An electric bulb of 60 W is
used for 6 h per day. Calculate the
units of energy consumed in one day
by the bulb.
Solution:
Power of electric bulb = 60 W
= 0.06 kW.
Time used, t = 6 h
Energy = power time taken
= 0.06 kW 6 h
= 0.36 kW h
= 0.36 units.
The energy consumed by the bulb is
0.36 units.
Displacement (height), h = 8 m
Time taken, t = 20 s
From Eq. (11.8),
Power, P = Work done/time taken
=
mgh
t
=
400 N 8 m
20s
= 160 W.
(ii) Power expended by girl B:
Weight of the girl, mg = 400 N
Displacement (height), h = 8 m
Time taken, t = 50 s
Power, P =
mgh
t
=
400 N 8 m
50s
= 64 W.
Power expended by girl A is 160 W.
Power expended by girl B is 64 W.
Example 11.8 A boy of mass 50 kg runs
up a staircase of 45 steps in 9 s. If the
height of each step is 15 cm, find his
power. Take g = 10 m s
2
.
Solution:
Weight of the boy,
mg = 50 kg 10 m s
2
= 500 N
Height of the staircase,
h = 45 15/100 m = 6.75 m
Time taken to climb, t = 9 s
From Eq. (11.8),
power, P = Work done/time taken
=
mgh
t
=
500 N 6.75 m
9s
= 375 W.
Power is 375 W.
Q
WORK AND ENERGY 157
Activity ____________11.17
Take a close look at the electric meter
installed in your house. Observe its
features closely.
Take the readings of the meter each
day at 6.30 am and 6.30 pm.
How many units are consumed during
day time?
How many units are used during
night?
Do this activity for about a week.
Tabulate your observations.
Draw inferences from the data.
Compare your observations with
the details given in the monthly
electricity bill.
What
you have
learnt
Work done on an object is defined as the magnitude of the
force multiplied by the distance moved by the object in the
direction of the applied force. The unit of work is joule:
1 joule = 1 newton 1 metre.
Work done on an object by a force would be zero if the
displacement of the object is zero.
An object having capability to do work is said to possess energy.
Energy has the same unit as that of work.
An object in motion possesses what is known as the kinetic
energy of the object. An object of mass, m moving with velocity
v has a kinetic energy of
2
mv
1
2
.
The energy possessed by a body due to its change in position
or shape is called the potential energy. The gravitational
potential energy of an object of mass, m raised through a height,
h from the earths surface is given by m g h.
According to the law of conservation of energy, energy can only
be transformed from one form to another; it can neither be
created nor destroyed. The total energy before and after the
transformation always remains constant.
Energy exists in nature in several forms such as kinetic energy,
potential energy, heat energy, chemical energy etc. The sum of
the kinetic and potential energies of an object is called its
mechanical energy.
Power is defined as the rate of doing work. The SI unit of power
is watt. 1 W = 1 J/s.
The energy used in one hour at the rate of 1kW is called 1 kW h.
SCIENCE 158
Exercises
1. Look at the activities listed below. Reason out whether or not
work is done in the light of your understanding of the term
work.
Suma is swimming in a pond.
A donkey is carrying a load on its back.
A wind-mill is lifting water from a well.
A green plant is carrying out photosynthesis.
An engine is pulling a train.
Food grains are getting dried in the sun.
A sailboat is moving due to wind energy.
2. An object thrown at a certain angle to the ground moves in a
curved path and falls back to the ground. The initial and the
final points of the path of the object lie on the same horizontal
line. What is the work done by the force of gravity on the object?
3. A battery lights a bulb. Describe the energy changes involved
in the process.
4. Certain force acting on a 20 kg mass changes its velocity from
5 m s
1
to 2 m s
1
. Calculate the work done by the force.
5. A mass of 10 kg is at a point A on a table. It is moved to a point
B. If the line joining A and B is horizontal, what is the work
done on the object by the gravitational force? Explain your
answer.
6. The potential energy of a freely falling object decreases
progressively. Does this violate the law of conservation of
energy? Why?
7. What are the various energy transformations that occur when
you are riding a bicycle?
8. Does the transfer of energy take place when you push a huge
rock with all your might and fail to move it? Where is the
energy you spend going?
9. A certain household has consumed 250 units of energy during
a month. How much energy is this in joules?
10. An object of mass 40 kg is raised to a height of 5 m above the
ground. What is its potential energy? If the object is allowed to
fall, find its kinetic energy when it is half-way down.
11. What is the work done by the force of gravity on a satellite
moving round the earth? Justify your answer.
12. Can there be displacement of an object in the absence of any
force acting on it? Think. Discuss this question with your friends
and teacher.
WORK AND ENERGY 159
13. A person holds a bundle of hay over his head for 30 minutes
and gets tired. Has he done some work or not? Justify your
answer.
14. An electric heater is rated 1500 W. How much energy does it
use in 10 hours?
15. Illustrate the law of conservation of energy by discussing the
energy changes which occur when we draw a pendulum bob to
one side and allow it to oscillate. Why does the bob eventually
come to rest? What happens to its energy eventually? Is it a
violation of the law of conservation of energy?
16. An object of mass, m is moving with a constant velocity, v.
How much work should be done on the object in order to bring
the object to rest?
17. Calculate the work required to be done to stop a car of 1500 kg
moving at a velocity of 60 km/h?
18. In each of the following a force, F is acting on an object of
mass, m. The direction of displacement is from west to east
shown by the longer arrow. Observe the diagrams carefully
and state whether the work done by the force is negative,
positive or zero.
19. Soni says that the acceleration in an object could be zero even
when several forces are acting on it. Do you agree with her?
Why?
20. Find the energy in kW h consumed in 10 hours by four devices
of power 500 W each.
21. A freely falling object eventually stops on reaching the ground.
What happenes to its kinetic energy?
Everyday we hear sounds from various
sources like humans, birds, bells, machines,
vehicles, televisions, radios etc. Sound is a
form of energy which produces a sensation
of hearing in our ears. There are also other
forms of energy like mechanical energy, heat
energy, light energy etc. We have talked about
mechanical energy in the previous chapters.
You have been taught about conservation of
energy, which states that we can neither
create nor destroy energy. We can just
change it from one form to another. When
you clap, a sound is produced. Can you
produce sound without utilising your energy?
Which form of energy did you use to produce
sound? In this chapter we are going to learn
how sound is produced and how it is
transmitted through a medium and received
by our ear.
12.1 Production of Sound
Activity _____________12.1
Take a tuning fork and set it vibrating
by striking its prong on a rubber pad.
Bring it near your ear.
Do you hear any sound?
Touch one of the prongs of the vibrating
tuning fork with your finger and share
your experience with your friends.
Now, suspend a table tennis ball or a
small plastic ball by a thread from a
support [Take a big needle and a
thread, put a knot at one end of the
thread, and then with the help of the
needle pass the thread through the
ball]. Touch the ball gently with the
prong of a vibrating tuning
fork (Fig. 12.1).
Observe what happens and discuss
with your friends.
Activity _____________12.2
Fill water in a beaker or a glass up to
the brim. Gently touch the water surface
with one of the prongs of the vibrating
tuning fork, as shown in Fig. 12.2.
Next dip the prongs of the vibrating
tuning fork in water, as shown in Fig.
12.3.
Observe what happens in both the
cases.
Discuss with your friends why this
happens.
Fig. 12.1: Vibrating tuning fork just touching the
suspended table tennis ball.
Fig. 12.2: One of the prongs of the vibrating tuning
fork touching the water surface.
12 12
12 12 12
S S
S SSOUND OUND OUND OUND OUND
Chapter
plucked vibrates and produces sound. If you
have never done this, then do it and observe
the vibration of the stretched rubber band.
Activity _____________12.3
Make a list of different types of musical
instruments and discuss with your
friends which part of the instrument
vibrates to produce sound.
12.2 Propagation of Sound
Sound is produced by vibrating objects. The
matter or substance through which sound
is transmitted is called a medium. It can be
solid, liquid or gas. Sound moves through a
medium from the point of generation to the
listener. When an object vibrates, it sets the
particles of the medium around it vibrating.
The particles do not travel all the way from
the vibrating object to the ear. A particle of
the medium in contact with the vibrating
object is first displaced from its equilibrium
position. It then exerts a force on the adjacent
particle. As a result of which the adjacent
particle gets displaced from its position of
rest. After displacing the adjacent particle the
first particle comes back to its original
position. This process continues in the
medium till the sound reaches your ear. The
disturbance created by a source of sound in
Fig. 12.3: Both the prongs of the vibrating tuning
fork dipped in water.
From the above activities what do you
conclude? Can you produce sound without
a vibrating object?
In the above activities we have produced
sound by striking the tuning fork. We can
also produce sound by plucking, scratching,
rubbing, blowing or shaking different objects.
As per the above activities what do we do to
the objects? We set the objects vibrating and
produce sound. Vibration means a kind of
rapid to and fro motion of an object. The
sound of the human voice is produced due
to vibrations in the vocal cords. When a bird
flaps its wings, do you hear any sound? Think
how the buzzing sound accompanying a bee
is produced. A stretched rubber band when
Fig. 12.4: A beam of light from a light source is made to fall on a mirror. The reflected light is falling on the wall.
Can sound make a light spot dance?
Take a tin can. Remove both ends to make it a hollow cylinder. Take a balloon and stretch
it over the can, then wrap a rubber band around the balloon. Take a small piece of mirror.
Use a drop of glue to stick the piece of mirror to the balloon. Allow the light through a slit
to fall on the mirror. After reflection the light spot is seen on the wall, as shown in Fig.
12.4. Talk or shout directly into the open end of the can and observe the dancing light spot
on the wall. Discuss with your friends what makes the light spot dance.
SOUND 161
SCIENCE 162
the medium travels through the medium and
not the particles of the medium.
A wave is a disturbance that moves
through a medium when the particles of the
medium set neighbouring particles into
motion. They in turn produce similar motion
in others. The particles of the medium do not
move forward themselves, but the
disturbance is carried forward. This is what
happens during propagation of sound in a
medium, hence sound can be visualised as a
wave. Sound waves are characterised by the
motion of particles in the medium and are
called mechanical waves.
Air is the most common medium through
which sound travels. When a vibrating object
moves forward, it pushes and compresses the
air in front of it creating a region of high
pressure. This region is called a compression
(C), as shown in Fig. 12.5. This compression
starts to move away from the vibrating object.
When the vibrating object moves backwards,
it creates a region of low pressure called
rarefaction (R), as shown in Fig. 12.5. As the
object moves back and forth rapidly, a series
of compressions and rarefactions is created
in the air. These make the sound wave that
propagates through the medium.
Compression is the region of high pressure
and rarefaction is the region of low pressure.
Pressure is related to the number of particles
of a medium in a given volume. More density
of the particles in the medium gives more
pressure and vice versa. Thus, propagation
of sound can be visualised as propagation of
density variations or pressure variations in
the medium.
uestion
1. How does the sound produced by
a vibrating object in a medium
reach your ear?
12.2.1 SOUND NEEDS A MEDIUM TO TRAVEL
Sound is a mechanical wave and needs a
material medium like air, water, steel etc. for
its propagation. It cannot travel through
vacuum, which can be demonstrated by the
following experiment.
Take an electric bell and an airtight glass
bell jar. The electric bell is suspended inside
the airtight bell jar. The bell jar is connected
to a vacuum pump, as shown in Fig. 12.6. If
you press the switch you will be able to hear
the bell. Now start the vacuum pump. When
the air in the jar is pumped out gradually,
the sound becomes fainter, although the
same current is passing through the bell.
After some time when less air is left inside
the bell jar you will hear a very feeble sound.
What will happen if the air is removed
completely? Will you still be able to hear the
sound of the bell?
Fig. 12.5: A vibrating object creating a series of
compressions (C) and rarefactions (R) in
the medium.
Q
Fig. 12.6: Bell jar experiment showing sound cannot
travel in vacuum.
SOUND 163
waves. In these waves the individual particles
of the medium move in a direction parallel to
the direction of propagation of the
disturbance. The particles do not move from
one place to another but they simply oscillate
back and forth about their position of rest.
This is exactly how a sound wave propagates,
hence sound waves are longitudinal waves.
There is also another type of wave, called
a transverse wave. In a transverse wave
particles do not oscillate along the line of
wave propagation but oscillate up and down
about their mean position as the wave travels.
Thus a transverse wave is the one in which
the individual particles of the medium move
about their mean positions in a direction
perpendicular to the direction of wave
propagation. Light is a transverse wave but
for light, the oscillations are not of the
medium particles or their pressure or density
it is not a mechanical wave. You will come
to know more about transverse waves in
higher classes.
12.2.3 CHARACTERISTICS OF A SOUND WAVE
We can describe a sound wave by its
frequency
amplitude and
speed.
A sound wave in graphic form is shown
in Fig. 12.8(c), which represents how density
and pressure change when the sound wave
moves in the medium. The density as well as
the pressure of the medium at a given time
varies with distance, above and below the
average value of density and pressure.
Fig. 12.8(a) and Fig. 12.8(b) represent the
density and pressure variations, respectively,
as a sound wave propagates in the medium.
Compressions are the regions where
particles are crowded together and
represented by the upper portion of the curve
in Fig. 12.8(c). The peak represents the region
of maximum compression. Thus,
compressions are regions where density as
well as pressure is high. Rarefactions are the
regions of low pressure where particles are
spread apart and are represented by the
uestions
1. Explain how sound is produced
by your school bell.
2. Why are sound waves called
mechanical waves?
3. Suppose you and your friend are
on the moon. Will you be able to
hear any sound produced by
your friend?
12.2.2 SOUND WAVES ARE LONGITUDINAL
WAVES
Activity _____________12.4
Take a slinky. Ask your friend to hold
one end. You hold the other end.
Now stretch the slinky as shown in
Fig. 12.7 (a). Then give it a sharp push
towards your friend.
What do you notice? If you move your
hand pushing and pulling the slinky
alternatively, what will you observe?
If you mark a dot on the slinky, you
will observe that the dot on the slinky
will move back and forth parallel to the
direction of the propagation of the
disturbance.
Fig. 12.7: Longitudinal wave in a slinky.
The regions where the coils become closer
are called compressions (C) and the regions
where the coils are further apart are called
rarefactions (R). As we already know, sound
propagates in the medium as a series of
compressions and rarefactions. Now, we can
compare the propagation of disturbance in a
slinky with the sound propagation in the
medium. These waves are called longitudinal
Q
(a)
(b)
SCIENCE 164
Frequency tells us how frequently an
event occurs. Suppose you are beating a
drum. How many times you are beating the
drum per unit time is called the frequency of
your beating the drum. We know that when
sound is propagated through a medium, the
density of the medium oscillates between a
maximum value and a minimum value. The
change in density from the maximum value
to the minimum value, again to the maximum
value, makes one complete oscillation. The
number of such oscillations per unit time is
the frequency of the sound wave. If we can
count the number of the compressions or
rarefactions that cross us per unit time, we
will get the frequency of the sound wave. It is
usually represented by (Greek letter, nu).
Its SI unit is hertz (symbol, Hz).
The time taken by two consecutive
compressions or rarefactions to cross a fixed
point is called the time period of the wave. In
other words, we can say that the time taken
for one complete oscillation in the density of
the medium is called the time period of the
valley, that is, the lower portion of the curve
in Fig. 12.8(c). A peak is called the crest and
a valley is called the trough of a wave.
The distance between two consecutive
compressions (C) or two consecutive
rarefactions (R) is called the wavelength, as
shown in Fig. 12.8(c), The wavelength is
usually represented by (Greek letter
lambda). Its SI unit is metre (m).
Heinrich Rudolph Hertz
was born on 22 February
1857 in Hamburg,
Germany and educated at
the University of Berlin. He
confirmed J.C. Maxwells
electromagnetic theory by
his experiments. He laid the
foundation for future
development of radio, telephone, telegraph
and even television. He also discovered the
photoelectric ef fect which was later
explained by Albert Einstein. The SI unit
of frequency was named as hertz in his
honour.
Fig. 12.8: Sound propagates as density or pressure variations as shown in (a) and (b), (c) represents
graphically the density and pressure variations.
H. R. Hertz
SOUND 165
sound wave. It is represented by the symbol
T. Its SI unit is second (s). Frequency and
time period are related as follows:
.
1
=
T
A violin and a flute may both be played
at the same time in an orchestra. Both
sounds travel through the same medium,
that is, air and arrive at our ear at the same
time. Both sounds travel at the same speed
irrespective of the source. But the sounds
we receive are different. This is due to the
different characteristics associated with the
sound. Pitch is one of the characteristics.
How the brain interprets the frequency
of an emitted sound is called the pitch. The
faster the vibration of the source, the higher
is the frequency and the higher is the pitch,
as shown in Fig. 12.9. Thus, a high pitch
sound corresponds to more number of
compressions and rarefactions passing a
fixed point per unit time.
Objects of different sizes and conditions
vibrate at different frequencies to produce
sounds of different pitch.
The magnitude of the maximum
disturbance in the medium on either side of
the mean value is called the amplitude of the
wave. It is usually represented by the letter
A, as shown in Fig. 12.8(c). For sound its
unit will be that of density or pressure.
The loudness or softness of a sound is
determined basically by its amplitude. The
amplitude of the sound wave depends upon
the force with which an object is made to
vibrate. If we strike a table lightly, we hear a
soft sound because we produce a sound wave
of less energy (amplitude). If we hit the table
hard we hear a loud sound. Can you tell why?
Loud sound can travel a larger distance as it
is associated with higher energy. A sound
wave spreads out from its source. As it moves
away from the source its amplitude as well
as its loudness decreases. Fig. 12.10 shows
the wave shapes of a loud and a soft sound
of the same frequency.
Fig. 12.9: Low pitch sound has low frequency and
high pitch of sound has high frequency.
Fig. 12.10: Soft sound has small amplitude and
louder sound has large amplitude.
The quality or timber of sound is that
characteristic which enables us to
distinguish one sound from another having
the same pitch and loudness. The sound
which is more pleasant is said to be of a rich
SCIENCE 166
quality. A sound of single frequency is called
a tone. The sound which is produced due to
a mixture of several frequencies is called a
note and is pleasant to listen to. Noise is
unpleasant to the ear! Music is pleasant to
hear and is of rich quality.
uestions
1. Which wave property determines
(a) loudness, (b) pitch?
2. Guess which sound has a higher
pitch: guitar or car horn?
The speed of sound is defined as the
distance which a point on a wave, such as a
compression or a rarefaction, travels per unit
time.
We know,
speed, v = distance / time
=
T
Here is the wavelength of the sound wave.
It is the distance travelled by the sound wave
in one time period (T) of the wave. Thus,
v =
1
T

=

Q
or v =
That is, speed = wavelength
frequency.
The speed of sound remains almost the
same for all frequencies in a given medium
under the same physical conditions.
Example 12.1 A sound wave has a
frequency of 2 kHz and wave length
35 cm. How long will it take to travel
1.5 km?
Solution:
Given,
Frequency, = 2 kHz = 2000 Hz
Wavelength, = 35 cm = 0.35 m
We know that speed, v of the wave
= wavelength frequency
v =
= 0.35 m
2000 Hz = 700 m/s

The time taken by the wave to travel a
distance, d of 1.5 km is
Thus sound will take 2.1 s to travel a
distance of 1.5 km.
uestions
1. What are wavelength, frequency,
time period and amplitude of a
sound wave?
2. How are the wavelength and
frequency of a sound wave
related to its speed?
3. Calculate the wavelength of a
sound wave whose frequency is
220 Hz and speed is 440 m/s in
a given medium.
4. A person is listening to a tone of
500 Hz sitting at a distance of
450 m from the source of the
sound. What is the time interval
between successive compressions
from the source?
The amount of sound energy passing each
second through unit area is called the
intensity of sound. We sometimes use the
terms loudness and intensity
interchangeably, but they are not the same.
Loudness is a measure of the response of the
ear to the sound. Even when two sounds are
of equal intensity, we may hear one as louder
than the other simply because our ear detects
it better.
uestion
1. Distinguish between loudness
and intensity of sound.
12.2.4 SPEED OF SOUND IN DIFFERENT
MEDIA
Sound propagates through a medium at a
finite speed. The sound of a thunder is heard
a little later than the flash of light is seen.
Q
Q
Q
SOUND 167
So, we can make out that sound travels with
a speed which is much less than the speed
of light. The speed of sound depends on the
properties of the medium through which it
travels. You will learn about this dependence
in higher classes. The speed of sound in a
medium depends also on temperature and
pressure of the medium. The speed of sound
decreases when we go from solid to gaseous
state. In any medium as we increase the
temperature the speed of sound increases.
For example, the speed of sound in air is
331 m s
1
at 0

C and 344 m s
1
at 22 C. The
speeds of sound at a particular temperature
in various media are listed in Table 12.1. You
need not memorise the values.
Sonic boom: When the speed of any object
exceeds the speed of sound it is said to be
travelling at supersonic speed. Bullets, jet
aircrafts etc. often travel at supersonic
speeds. When a sound, producing source
moves with a speed higher than that of
sound, it produces shock waves in air.
These shock waves carry a large amount
of energy. The air pressure variation
associated with this type of shock waves
produces a very sharp and loud sound
called the sonic boom. The shock waves
produced by a supersonic aircraft have
enough energy to shatter glass and even
damage buildings.
12.3 Reflection of Sound
Sound bounces off a solid or a liquid like a
rubber ball bounces off a wall. Like light,
sound gets reflected at the surface of a solid
or liquid and follows the same laws of
reflection as you have studied in earlier
classes. The directions in which the sound
is incident and is reflected make equal angles
with the normal to the reflecting surface, and
the three are in the same plane. An obstacle
of large size which may be polished or rough
is needed for the reflection of sound waves.
Activity _____________12.5
Take two identical pipes, as shown in
Fig. 12.11. You can make the pipes
using chart paper. The length of the
pipes should be suf ficiently long
as shown.
Arrange them on a table near a wall.
Keep a clock near the open end of one
of the pipes and try to hear the sound
of the clock through the other pipe.
Adjust the position of the pipes so that
you can best hear the sound of
the clock.
Now, measure the angles of incidence
and reflection and see the relationship
between the angles.
Lift the pipe on the right vertically
to a small height and observe
what happens.
Table 12.1: Speed of sound in
different media at 25 C
State Substance Speed in m/s
Solids Aluminium 6420
Nickel 6040
Steel 5960
Iron 5950
Brass 4700
Glass (Flint) 3980
Liquids Water (Sea) 1531
Water (distilled) 1498
Ethanol 1207
Methanol 1103
Gases Hydrogen 1284
Helium 965
Air 346
Oxygen 316
Sulphur dioxide 213
uestion
1. In which of the three media, air,
water or iron, does sound travel
the fastest at a particular
temperature?
Q
SCIENCE 168
12.3.1 ECHO
If we shout or clap near a suitable reflecting
object such as a tall building or a mountain,
we will hear the same sound again a little
later. This sound which we hear is called an
echo. The sensation of sound persists in our
brain for about 0.1 s. To hear a distinct echo
the time interval between the original sound
and the reflected one must be at least 0.1s.
If we take the speed of sound to be 344 m/s
at a given temperature, say at 22 C in air,
the sound must go to the obstacle and reach
back the ear of the listener on reflection after
0.1s. Hence, the total distance covered by the
sound from the point of generation to the
reflecting surface and back should be at least
(344 m/s) 0.1 s = 34.4 m. Thus, for hearing
distinct echoes, the minimum distance of the
obstacle from the source of sound must be
half of this distance, that is, 17.2 m. This
distance will change with the temperature of
air. Echoes may be heard more than once
due to successive or multiple reflections. The
rolling of thunder is due to the successive
reflections of the sound from a number of
reflecting surfaces, such as the clouds and
the land.
12.3.2 REVERBERATION
A sound created in a big hall will persist by
repeated reflection from the walls until it is
reduced to a value where it is no longer
audible. The repeated reflection that results
in this persistence of sound is called
reverberation. In an auditorium or big hall
excessive reverberation is highly undesirable.
To reduce reverberation, the roof and walls
of the auditorium are generally covered with
sound-absorbent materials like compressed
fibreboard, rough plaster or draperies. The
seat materials are also selected on the basis
of their sound absorbing properties.
Example 12.2 A person clapped his hands
near a cliff and heard the echo after
5 s. What is the distance of the cliff
from the person if the speed of the
sound, v is taken as 346 m s
1
?
Solution:
Given,
Speed of sound, v = 346 m s
1
Time taken for hearing the echo,
t = 5 s
Distance travelled by the sound
= v t = 346 m s
1
5 s = 1730 m
In 5 s sound has to travel twice the
distance between the cliff and the
person. Hence, the distance between
the cliff and the person
= 1730 m/2 = 865 m.
uestion
1. An echo returned in 3 s. What is
the distance of the reflecting
surface from the source, given
that the speed of sound is
342 m s
1
?
12.3.3 USES OF MULTIPLE REFLECTION
OF SOUND
1. Megaphones or loudhailers, horns,
musical instruments such as trumpets
and shehanais, are all designed to
send sound in a particular direction
without spreading it in all directions,
as shown in Fig 12.12.
Fig. 12.11: Reflection of sound
Q
SOUND 169
curved soundboard may be placed
behind the stage so that the sound,
after reflecting from the sound board,
spreads evenly across the width of the
hall (Fig 12.15).
Fig 12.12: A megaphone and a horn.
In these instruments, a tube followed
by a conical opening reflects sound
successively to guide most of the sound
waves from the source in the forward
direction towards the audience.
2. Stethoscope is a medical instrument
used for listening to sounds produced
within the body, chiefly in the heart or
lungs. In stethoscopes the sound of the
patient s heartbeat reaches the
doctors ears by multiple reflection of
sound, as shown in Fig.12.13.
Megaphone
Horn
Fig.12.13: Stethoscope
3. Generally the ceilings of concert halls,
conference halls and cinema halls are
curved so that sound after reflection
reaches all corners of the hall, as
shown in Fig 12.14. Sometimes a
Fig. 12.14: Curved ceiling of a conference hall.
Fig. 12.15: Sound board used in a big hall.
uestion
1. Why are the ceilings of concert
halls curved?
12.4 Range of Hearing
The audible range of sound for human beings
extends from about 20 Hz to 20000 Hz (one
Hz = one cycle/s). Children under the age of
Q
SCIENCE 170
five and some animals, such as dogs can hear
up to 25 kHz (1 kHz = 1000 Hz). As people
grow older their ears become less sensitive
to higher frequencies. Sounds of frequencies
below 20 Hz are called infrasonic sound or
infrasound. If we could hear infrasound we
would hear the vibrations of a pendulum just
as we hear the vibrations of the wings of a
bee. Rhinoceroses communicate using
infrasound of frequency as low as 5 Hz.
Whales and elephants produce sound in the
infrasound range. It is observed that some
animals get disturbed before earthquakes.
Earthquakes produce low-frequency
infrasound before the main shock waves
begin which possibly alert the animals.
Frequencies higher than 20 kHz are called
ultrasonic sound or ultrasound. Ultrasound
is produced by dolphins, bats and porpoises.
Moths of certain families have very sensitive
hearing equipment. These moths can hear
the high frequency squeaks of the bat and
know when a bat is flying nearby, and are
able to escape capture. Rats also play games
by producing ultrasound.
Hearing Aid: People with hearing loss may
need a hearing aid. A hearing aid is an
electronic, battery operated device. The
hearing aid receives sound through a
microphone. The microphone converts the
sound waves to electrical signals. These
electrical signals are amplified by an
amplifier. The amplified electrical signals
are given to a speaker of the hearing aid.
The speaker converts the amplified
electrical signal to sound and sends to the
ear for clear hearing.
uestions
1. What is the audible range of the
average human ear?
2. What is the range of frequencies
associated with
(a) Infrasound?
(b) Ultrasound?
12.5 Applications of Ultrasound
Ultrasounds are high frequency waves.
Ultrasounds are able to travel along well-
defined paths even in the presence of
obstacles. Ultrasounds are used extensively
in industries and for medical purposes.
Ultrasound is generally used to clean
parts located in hard-to-reach places,
for example, spiral tube, odd shaped
parts, electronic components etc.
Objects to be cleaned are placed in a
cleaning solution and ultrasonic
waves are sent into the solution. Due
to the high frequency, the particles of
dust, grease and dirt get detached and
drop out. The objects thus get
thoroughly cleaned.
Ultrasounds can be used to detect
cracks and flaws in metal blocks.
Metallic components are generally
used in construction of big structures
like buildings, bridges, machines and
also scientific equipment. The cracks
or holes inside the metal blocks, which
are invisible from outside reduces the
strength of the structure. Ultrasonic
waves are allowed to pass through the
metal block and detectors are used to
detect the transmitted waves. If there
is even a small defect, the ultrasound
gets reflected back indicating the
presence of the flaw or defect, as
shown in Fig. 12.16.
Q Fig 12.16: Ultrasound is reflected back from the
defective locations inside a metal block.
SOUND 171
Ordinary sound of longer wavelengths
cannot be used for such purpose as it will
bend around the corners of the defective
location and enter the detector.
Ultrasonic waves are made to reflect
from various parts of the heart and
form the image of the heart. This tech-
nique is called echocardiography.
Ultrasound scanner is an instrument
which uses ultrasonic waves for
getting images of internal organs of
the human body. A doctor may image
the patients organs such as the liver,
gall bladder, uterus, kidney, etc. It
helps the doctor to detect
abnormalities, such as stones in the
gall bladder and kidney or tumours
in different organs. In this technique
the ultrasonic waves travel through
the tissues of the body and get
reflected from a region where there is
a change of tissue density. These
waves are then converted into
electrical signals that are used to
generate images of the organ. These
images are then displayed on a
monitor or printed on a film. This
technique is called ultrasonography.
Ultrasonography is also used for
examination of the foetus during
pregnancy to detect congenial defects
and growth abnormalities.
Ultrasound may be employed to break
small stones formed in the kidneys
into fine grains. These grains later get
flushed out with urine.
12.5.1SONAR
The acronym SONAR stands for SOund
Navigation And Ranging. Sonar is a device
that uses ultrasonic waves to measure the
distance, direction and speed of underwater
objects. How does the sonar work? Sonar
consists of a transmitter and a detector and
is installed in a boat or a ship, as shown in
Fig. 12.17.
Fig.12.17: Ultrasound sent by the transmitter and
received by the detector.
The transmitter produces and transmits
ultrasonic waves. These waves travel through
water and after striking the object on the
seabed, get reflected back and are sensed
by the detector. The detector converts the
ultrasonic waves into electrical signals which
are appropriately interpreted. The distance
of the object that reflected the sound wave
can be calculated by knowing the speed of
sound in water and the time interval between
transmission and reception of the
ultrasound. Let the time interval between
transmission and reception of ultrasound
signal be t and the speed of sound through
seawater be v. The total distance, 2d travelled
by the ultrasound is then, 2d = v t.
The above method is called echo-ranging.
The sonar technique is used to determine the
depth of the sea and to locate underwater
hills, valleys, submarine, icebergs, sunken
ship etc.
Example 12.3 A ship sends out ultrasound
that returns from the seabed and is
detected after 3.42 s. If the speed of
ultrasound through seawater is
1531 m/s, what is the distance of the
seabed from the ship?
Solution:
Given,
Time between transmission and
detection, t = 3.42 s.
SCIENCE 172
Speed of ultrasound in sea water,
v = 1531 m/s
Distance travelled by the ultrasound
= 2 depth of the sea = 2d
where d is the depth of the sea.
2d = speed of sound time
= 1531 m/s 3.42 s = 5236 m
d = 5236 m/2 = 2618 m.
Thus, the distance of the seabed from
the ship is 2618 m or 2.62 km.
uestion
1. A submarine emits a sonar pulse,
which retur ns from an
underwater cliff in 1.02 s. If the
speed of sound in salt water is
1531 m/s, how far away is the
cliff?
As mentioned earlier, bats search out prey
and fly in dark night by emitting and
detecting reflections of ultrasonic waves. The
high-pitched ultrasonic squeaks of the bat
are reflected from the obstacles or prey and
returned to bats ear, as shown in Fig. 12.18.
The nature of reflections tells the bat where
the obstacle or prey is and what it is like.
Porpoises also use ultrasound for navigation
and location of food in the dark.
12.6 Structure of Human Ear
How do we hear? We are able to hear with
the help of an extremely sensitive device
called the ear. It allows us to convert pressure
variations in air with audible frequencies into
electric signals that travel to the brain via
the auditory nerve. The auditory aspect of
human ear is discussed below.
Q
Fig. 12.18: Ultrasound is emitted by a bat and it is
reflected back by the prey or an obstacle.
The outer ear is called pinna. It collects
the sound from the surroundings. The
collected sound passes through the auditory
canal. At the end of the auditory canal there
is a thin membrane called the ear drum or
tympanic membrane. When a compression
of the medium reaches the eardrum the
pressure on the outside of the membrane
increases and forces the eardrum inward.
Similarly, the eardrum moves outward when
a rarefaction reaches it. In this way the
eardrum vibrates. The vibrations are
amplified several times by three bones (the
hammer, anvil and stirrup) in the middle ear.
The middle ear transmits the amplified
pressure variations received from the sound
wave to the inner ear. In the inner ear, the
pressure variations are turned into electrical
signals by the cochlea. These electrical
signals are sent to the brain via the auditory
nerve, and the brain interprets them as
sound.
Fig. 12.19: Auditory parts of human ear.
SOUND 173
What
you have
learnt
Sound is produced due to vibration of different objects.
Sound travels as a longitudinal wave through a material
medium.
Sound travels as successive compressions and rarefactions in
the medium.
In sound propagation, it is the energy of the sound that travels
and not the particles of the medium.
Sound cannot travel in vacuum.
The change in density from one maximum value to the
minimum value and again to the maximum value makes one
complete oscillation.
The distance between two consecutive compressions or two
consecutive rarefactions is called the wavelength, .
The time taken by the wave for one complete oscillation of the
density or pressure of the medium is called the time period, T.
The number of complete oscillations per unit time is called the
frequency (),
1
=
T
.
The speed v, frequency , and wavelength , of sound are related
by the equation, v = .
The speed of sound depends primarily on the nature and the
temperature of the transmitting medium.
The law of reflection of sound states that the directions in which
the sound is incident and reflected make equal angles with
the normal to the reflecting surface and the three lie in the
same plane.
For hearing a distinct sound, the time interval between the
original sound and the reflected one must be at least 0.1 s.
The persistence of sound in an auditorium is the result of
repeated reflections of sound and is called reverberation.
Sound properties such as pitch, loudness and quality are
determined by the corresponding wave properties.
Loudness is a physiological response of the ear to the intensity
of sound.
The amount of sound energy passing each second through
unit area is called the intensity of sound.
The audible range of hearing for average human beings is in
the frequency range of 20 Hz 20 kHz.
SCIENCE 174
Sound waves with frequencies below the audible range are
termed infrasonic and those above the audible range are
termed ultrasonic.
Ultrasound has many medical and industrial applications.
The SONAR technique is used to determine the depth of the
sea and to locate under water hills, valleys, submarines,
icebergs, sunken ships etc.
Exercises
1. What is sound and how is it produced?
2. Describe with the help of a diagram, how compressions and
rarefactions are produced in air near a source of sound.
3. Cite an experiment to show that sound needs a material
medium for its propagation.
4. Why is sound wave called a longitudinal wave?
5. Which characteristic of the sound helps you to identify your
friend by his voice while sitting with others in a dark room?
6. Flash and thunder are produced simultaneously. But thunder
is heard a few seconds after the flash is seen, why?
7. A person has a hearing range from 20 Hz to 20 kHz. What are
the typical wavelengths of sound waves in air corresponding
to these two frequencies? Take the speed of sound in air as
344 m s
1
.
8. Two children are at opposite ends of an aluminium rod. One
strikes the end of the rod with a stone. Find the ratio of times
taken by the sound wave in air and in aluminium to reach the
second child.
9. The frequency of a source of sound is 100 Hz. How many times
does it vibrate in a minute?
10. Does sound follow the same laws of reflection as light does?
Explain.
11. When a sound is reflected from a distant object, an echo is
produced. Let the distance between the reflecting surface and
the source of sound production remains the same. Do you
hear echo sound on a hotter day?
12. Give two practical applications of reflection of sound waves.
13. A stone is dropped from the top of a tower 500 m high into a
pond of water at the base of the tower. When is the splash
heard at the top? Given, g = 10 m s
2
and speed of sound =
340 m s
1
.
14. A sound wave travels at a speed of 339 m s
1
. If its wavelength
is 1.5 cm, what is the frequency of the wave? Will it be audible?
SOUND 175
15. What is reverberation? How can it be reduced?
16. What is loudness of sound? What factors does it depend on?
17. Explain how bats use ultrasound to catch a prey.
18. How is ultrasound used for cleaning?
19. Explain the working and application of a sonar.
20. A sonar device on a submarine sends out a signal and receives
an echo 5 s later. Calculate the speed of sound in water if the
distance of the object from the submarine is 3625 m.
21. Explain how defects in a metal block can be detected using
ultrasound.
22. Explain how the human ear works.
Activity _____________13.1
We have all heard of the earthquakes
in Latur, Bhuj, Kashmir etc. or the
cyclones that attack the coastal
regions. Think of as many different
ways as possible in which peoples
health would be affected by such a
disaster if it took place in our
neighbourhood.
How many of these ways we can think of
are events that would occur when the
disaster is actually happening?
How many of these health-related events
would happen long after the actual
disaster, but would still be because of the
disaster?
Why would one effect on health fall into
the first group, and why would another
fall into the second group?
When we do this exercise, we realise that
health and disease in human communities
are very complex issues, with many
interconnected causes. We also realise that
the ideas of what health and disease mean
are themselves very complicated. When we
ask what causes diseases and how we prevent
them, we have to begin by asking what these
notions mean.
We have seen that cells are the basic units
of living beings. Cells are made of a variety of
chemical substances proteins, carbo-
hydrates, fats or lipids, and so on. Although
the pictures look quite static, in reality the
living cell is a dynamic place. Something or
the other is always happening. Cells move
from place to place. Even in cells that do not
move, there is repair going on. New cells are
being made. In our organs or tissues, there
are various specialised activities going on
the heart is beating, the lungs are breathing,
the kidney is filtering urine, the brain is
thinking.
All these activities are interconnected. For
example, if the kidneys are not filtering urine,
poisonous substances will accumulate. Under
such conditions, the brain will not be able to
think properly. For all these interconnected
activities, energy and raw material are needed
from outside the body. In other words, food
is a necessity for cell and tissue functions.
Anything that prevents proper functioning of
cells and tissues will lead to a lack of proper
activity of the body.
It is in this context that we will now look
at the notions of health and disease.
13.1 Health and its Failure
13.1.1 THE SIGNIFICANCE OF HEALTH
We have heard the word health used quite
frequently all around us. We use it ourselves
as well, when we say things like my
grandmothers health is not good. Our
teachers use it when they scold us saying this
is not a healthy attitude. What does the word
health mean?
If we think about it, we realise that it
always implies the idea of being well. We can
think of this well-being as ef fective
functioning. For our grandmothers, being able
to go out to the market or to visit neighbours
is being well, and not being able to do such
things is poor health. Being interested in
following the teaching in the classroom so that
we can understand the world is called a
healthy attitude; while not being interested
is called the opposite. Health is therefore a
state of being well enough to function well
physically, mentally and socially.
13 13
13 13 13
W W
W WWHY HY HY HY HY D D
D DDO OO OO W W
W WWE EE EE F F
F FFALL ALL ALL ALL ALL I I
I IILL LL LL LL LL
Chapter
We need food for health, and this food will
have to be earned by doing work. For this,
the opportunity to do work has to be available.
Good economic conditions and jobs are
therefore needed for individual health.
We need to be happy in order to be truly
healthy, and if we mistreat each other and
are afraid of each other, we cannot be happy
or healthy. Social equality and harmony are
therefore necessary for individual health. We
can think of many other such examples of
connections between community issues and
individual health.
13.1.3 DISTINCTIONS BETWEEN HEALTHY
AND DISEASE-FREE
If this is what we mean by health, what do
we mean by disease? The word is actually
self-explanatory we can think of it as
disease disturbed ease. Disease, in other
words, literally means being uncomfortable.
However, the word is used in a more limited
meaning. We talk of disease when we can find
a specific and particular cause for discomfort.
This does not mean that we have to know the
absolute final cause; we can say that
someone is suffering from diarrhoea without
knowing exactly what has caused the loose
motions.
We can now easily see that it is possible
to be in poor health without actually suffering
from a particular disease. Simply not being
diseased is not the same as being healthy.
Good health for a dancer may mean being
able to stretch his body into difficult but
graceful positions. On the other hand, good
health for a musician may mean having enough
breathing capacity in his/her lungs to control
the notes from his/her flute. To have the
opportunity to realise the unique potential
in all of us is also necessary for real health.
So, we can be in poor health without there
being a simple cause in the form of an
identifiable disease. This is the reason why,
when we think about health, we think about
societies and communities. On the other
hand, when we think about disease, we think
about individual sufferers.
13.1.2 PERSONAL AND COMMUNITY ISSUES
BOTH MATTER FOR HEALTH
If health means a state of physical, mental
and social well-being, it cannot be something
that each one of us can achieve entirely on
our own. The health of all organisms will
depend on their surroundings or their
environment. The environment includes the
physical environment. So, for example, health
is at risk in a cyclone in many ways.
But even more importantly, human beings
live in societies. Our social environment,
therefore, is an important factor in our
individual health. We live in villages, towns
or cities. In such places, even our physical
environment is decided by our social
environment.
Consider what would happen if no agency
is ensuring that garbage is collected and
disposed. What would happen if no one takes
responsibility for clearing the drains and
ensuring that water does not collect in the
streets or open spaces?
So, if there is a great deal of garbage
thrown in our streets, or if there is open drain-
water lying stagnant around where we live,
the possibility of poor health increases.
Therefore, public cleanliness is important for
individual health.
Activity _____________13.2
Find out what provisions are made by
your local authority (panchayat/
municipal corporation) for the supply
of clean drinking water.
Are all the people in your locality able
to access this?
Activity _____________13.3
Find out how your local authority
manages the solid waste generated in
your neighbourhood.
Are these measures adequate?
If not, what improvements would you
suggest?
What could your family do to reduce
the amount of solid waste generated
during a day/week?
WHY DO WE FALL ILL 177
SCIENCE 178
uestions
1. State any two conditions
essential for good health.
2. State any two conditions
essential for being free of disease.
3. Are the answers to the above
questions necessarily the same
or different? Why?
13.2 Disease and Its Causes
13.2.1 WHAT DOES DISEASE LOOK LIKE?
Let us now think a little more about diseases.
In the first place, how do we know that there
is a disease? In other words, how do we know
that there is something wrong with the body?
There are many tissues in the body, as we
have seen in Chapter 6. These tissues make
up physiological systems or organ systems
that carry out body functions. Each of the
organ systems has specific organs as its parts,
and it has particular functions. So, the
digestive system has the stomach and
intestines, and it helps to digest food taken
in from outside the body. The musculoskeletal
system, which is made up of bones and
muscles, holds the body parts together and
helps the body move.
When there is a disease, either the
functioning or the appearance of one or more
systems of the body will change for the worse.
These changes give rise to symptoms and
signs of disease. Symptoms of disease are the
things we feel as being wrong. So we have a
headache, we have cough, we have loose
motions, we have a wound with pus; these
are all symptoms. These indicate that there
may be a disease, but they dont indicate what
the disease is. For example, a headache may
mean just examination stress or, very rarely,
it may mean meningitis, or any one of a dozen
different diseases.
Signs of disease are what physicians will
look for on the basis of the symptoms. Signs
will give a little more definite indication of
the presence of a particular disease.
Physicians will also get laboratory tests done
to pinpoint the disease further.
13.2.2 ACUTE AND CHRONIC DISEASES
The manifestations of disease will be different
depending on a number of factors. One of the
most obvious factors that determine how we
perceive the disease is its duration. Some
diseases last for only very short periods of
time, and these are called acute diseases. We
all know from experience that the common
cold lasts only a few days. Other ailments can
last for a long time, even as much as a lifetime,
and are called chronic diseases. An example
is the infection causing elephantiasis, which
is very common in some parts of India.
Activity _____________13.4
Survey your neighbourhood to find out:
(1) how many people suffered from
acute diseases during the last three
months,
(2) how many people developed chronic
diseases during this same period,
(3) and finally, the total number of
people suf fering from chronic
diseases in your neighbourhood.
Are the answers to questions (1) and
(2) different?
Are the answers to questions (2) and
(3) different?
What do you think could be the reason
for these differences? What do you think
would be the effect of these differences
on the general health of the population?
13.2.3 CHRONIC DISEASES AND POOR
HEALTH
As we can imagine, acute and chronic
diseases have different effects on our health.
Any disease that causes poor functioning of
some part of the body will affect our general
health as well. This is because all functions
of the body are necessary for general health.
But an acute disease, which is over very soon,
will not have time to cause major effects on
general health, while a chronic disease will
do so.
As an example, think about a cough and
cold, which all of us have from time to time.
Most of us get better and become well within
a week or so. And there are no bad effects on
Q
would not lead to loose motions. But they do
become contributory causes of the disease.
Why was there no clean drinking water
for the baby? Perhaps because the public
services are poor where the babys family
lives. So, poverty or lack of public services
become third-level causes of the babys
disease.
It will now be obvious that all diseases
will have immediate causes and contributory
causes. Also, most diseases will have many
causes, rather than one single cause.
13.2.5 INFECTIOUS AND NON-INFECTIOUS
CAUSES
As we have seen, it is important to keep public
health and community health factors in mind
when we think about causes of diseases. We
can take that approach a little further. It is
useful to think of the immediate causes of
disease as belonging to two distinct types. One
group of causes is the infectious agents,
mostly microbes or micro-organisms.
Diseases where microbes are the immediate
causes are called infectious diseases. This is
because the microbes can spread in the
community, and the diseases they cause will
spread with them.
Things to ponder
1. Do all diseases spread to people
coming in contact with a sick person?
2. What are the diseases that are not
spreading?
3. How would a person develop those
diseases that dont spread by contact
with a sick person?
On the other hand, there are also diseases
that are not caused by infectious agents. Their
causes vary, but they are not external causes
like microbes that can spread in the
community. Instead, these are mostly
internal, non-infectious causes.
For example, some cancers are caused by
genetic abnormalities. High blood pressure
can be caused by excessive weight and lack
of exercise. You can think of many other
diseases where the immediate causes will not
be infectious.
our health. We do not lose weight, we do not
become short of breath, we do not feel tired
all the time because of a few days of cough
and cold. But if we get infected with a chronic
disease such as tuberculosis of the lungs,
then being ill over the years does make us
lose weight and feel tired all the time.
We may not go to school for a few days if
we have an acute disease. But a chronic
disease will make it difficult for us to follow
what is being taught in school and reduce
our ability to learn. In other words, we are
likely to have prolonged general poor health
if we have a chronic disease. Chronic diseases
therefore, have very drastic long-term effects
on peoples health as compared to acute
diseases.
13.2.4 CAUSES OF DISEASES
What causes disease? When we think about
causes of diseases, we must remember that
there are many levels of such causes. Let us
look at an example. If there is a baby suffering
from loose motions, we can say that the cause
of the loose motions is an infection with a
virus. So the immediate cause of the disease
is a virus.
But the next question is where did the
virus come from? Suppose we find that the
virus came through unclean drinking water.
But many babies must have had this unclean
drinking water. So, why is it that one baby
developed loose motions when the other
babies did not?
One reason might be that this baby is not
healthy. As a result, it might be more likely
to have disease when exposed to risk, whereas
healthier babies would not. Why is the baby
not healthy? Perhaps because it is not well
nourished and does not get enough food. So,
lack of good nourishment becomes a second-
level cause of the disease the baby is suffering
from. Further, why is the baby not well
nourished? Perhaps because it is from a
household which is poor.
It is also possible that the baby has some
genetic difference that makes it more likely
to suffer from loose motions when exposed
to such a virus. Without the virus, the genetic
difference or the poor nourishment alone
SCIENCE 180
The ways in which diseases spread, and
the ways in which they can be treated and
prevented at the community level would be
different for different diseases. This would
depend a lot on whether the immediate
causes are infectious or non-infectious.
uestions
1. List any three reasons why you
would think that you are sick and
ought to see a doctor. If only one
of these symptoms were present,
would you still go to the doctor?
Why or why not?
2. In which of the following case do
you think the long-term effects on
your health are likely to be most
unpleasant?
if you get jaundice,
if you get lice,
if you get acne.
Why?
13.3 Infectious Diseases
13.3.1 INFECTIOUS AGENTS
We have seen that the entire diversity seen in
the living world can be classified into a few
groups. This classification is based on
common characteristics between different
organisms. Organisms that can cause disease
are found in a wide range of such categories
of classification. Some of them are viruses,
some are bacteria, some are fungi, some are
single-celled animals or protozoans. Some
diseases are also caused by multicellular
organisms, such as worms of different kinds.
Peptic ulcers and the Nobel prize
For many years, everybody used to think
that peptic ulcers, which cause acidity
related pain and bleeding in the stomach
and duodenum, were because of lifestyle
reasons. Everybody thought that a
stressful life led to a lot of acid secretion
in the stomach, and eventually caused
peptic ulcers.
Then two Australians made a discovery
that a bacterium, Helicobacter pylori, was
responsible for peptic ulcers. Robin Warren
(born 1937), a pathologist from Perth,
Australia, saw these small curved bacteria
in the lower part of the stomach in many
patients. He noticed that signs of
inflammation were always present around
these bacteria. Barry Marshall (born 1951),
a young clinical fellow, became interested
in Warrens findings and succeeded in
cultivating the bacteria from these sources.
In treatment studies, Marshall and
Warren showed that patients could be
cured of peptic ulcer only when the
bacteria were killed off from the stomach.
Thanks to this pioneering discovery by
Marshall and Warren, peptic ulcer disease
is no longer a chronic, frequently disabling
condition, but a disease that can be cured
by a short period of treatment with
antibiotics.
Q
For this achievement, Marshall and
Warren (seen in the picture) received the
Nobel prize for physiology and medicine
in 2005.
Fig. 13.1(b): Picture of staphylococci, the bacteria
which can cause acne. The scale of the
image is indicated by the line at top left,
which is 5 micrometres long.
Fig. 13.1(d): Picture of Leishmania, the protozoan
organism that causes kala-azar. The
organisms are oval-shaped, and each
has one long whip-like structure. One
organism (arrow) is dividing, while a cell
of the immune system (lower right) has
gripped on the two whips of the dividing
organism and is sending cell processes
up to eat up the organism. The immune
cell is about ten micrometres in diameter.
Fig. 13.1(e): Picture of an adult roundworm (Ascaris
lumbricoides is the technical name) from
the small intestine. The ruler next to it
shows four centimetres to give us an
idea of the scale.
Fig. 13.1(a): Picture of SARS viruses coming out (see
arrows for examples) of the surface of
an infected cell. The white scale line
represents 500 nanometres, which is
half a micrometre, which is one-
thousandth of a millimetre. The scale line
gives us an idea of how small the things
we are looking at are.
Courtesy: Emerging Infectious
Deseases, a journal of CDC, U.S.
Fig. 13.1(c): Picture of Trypanosoma, the protozoan
organism responsible for sleeping
sickness. The organism is lying next to
a saucer-shaped red blood cell to give
an idea of the scale.
Copyright: Oregon Health and Science
University, U.S.
SCIENCE 182
Common examples of diseases caused by
viruses are the common cold, influenza,
dengue fever and AIDS. Diseases like typhoid
fever, cholera, tuberculosis and anthrax are
caused by bacteria. Many common skin
infections are caused by different kinds of
fungi. Protozoan microbes cause many
familiar diseases, such as malaria and kala-
azar. All of us have also come across intestinal
worm infections, as well as diseases like
elephantiasis caused by diffferent species of
worms.
Why is it important that we think of these
categories of infectious agents? The answer
is that these categories are important factors
in deciding what kind of treatment to use.
Members of each one of these groups
viruses, bacteria, and so on have many
biological characteristics in common.
All viruses, for example, live inside host
cells, whereas bacteria very rarely do. Viruses,
bacteria and fungi multiply very quickly, while
worms multiply very slowly in comparison.
Taxonomically, all bacteria are closely related
to each other than to viruses and vice versa.
This means that many important life
processes are similar in the bacteria group
but are not shared with the virus group. As a
result, drugs that block one of these life
processes in one member of the group is likely
to be effective against many other members
of the group. But the same drug will not work
against a microbe belonging to a different
group.
As an example, let us take antibiotics.
They commonly block biochemical pathways
important for bacteria. Many bacteria, for
example, make a cell-wall to protect
themselves. The antibiotic penicillin blocks
the bacterial processes that build the cell-
wall. As a result, the growing bacteria become
unable to make cell-walls, and die easily.
Human cells dont make a cell-wall anyway,
so penicillin cannot have such an effect on
us. Penicillin will have this effect on any
bacteria that use such processes for making
cell-walls. Similarly, many antibiotics work
against many species of bacteria rather than
simply working against one.
But viruses do not use these pathways at
all, and that is the reason why antibiotics do
not work against viral infections. If we have a
common cold, taking antibiotics does not
reduce the severity or the duration of the
disease. However, if we also get a bacterial
infection along with the viral cold, taking
antibiotics will help. Even then, the antibiotic
will work only against the bacterial part of
the infection, not the viral infection.
Activity _____________13.5
Find out how many of you in your class
had cold/cough/fever recently.
How long did the illness last?
How many of you took antibiotics (ask
your parents if you had antibiotics)?
How long were those who took
antibiotics ill?
How long were those who didnt take
antibiotics ill?
Is there a difference between these two
groups?
If yes, why? If not, why not?
13.3.2 MEANS OF SPREAD
How do infectious diseases spread? Many
microbial agents can commonly move from
an affected person to someone else in a variety
of ways. In other words, they can be
communicated, and so are also called
communicable diseases.
Such disease-causing microbes can
spread through the air. This occurs through
the little droplets thrown out by an infected
person who sneezes or coughs. Someone
standing close by can breathe in these
droplets, and the microbes get a chance to
start a new infection. Examples of such
diseases spread through the air are the
common cold, pneumonia and tuberculosis.
We all have had the experience of sitting
near someone suffering from a cold and
catching it ourselves. Obviously, the more
crowded our living conditions are, the more
likely it is that such airborne diseases will
spread.
Fig. 13.2: Air-transmitted diseases are easier to
catch the closer we are to the infected
person. However, in closed areas, the
droplet nuclei recirculate and pose a risk
to everybody. Overcrowded and poorly
ventilated housing is therefore a major
factor in the spread of airborne diseases.
Diseases can also be spread through
water. This occurs if the excreta from someone
suffering from an infectious gut disease, such
as cholera, get mixed with the drinking water
used by people living nearby. The cholera-
causing microbes will enter new hosts
through the water they drink and cause
disease in them. Such diseases are much
more likely to spread in the absence of safe
supplies of drinking water.
The sexual act is one of the closest
physical contact two people can have with
each other. Not surprisingly, there are
microbial diseases such as syphilis or AIDS
that are transmitted by sexual contact from
one partner to the other. However, such
sexually transmitted diseases are not spread
by casual physical contact. Casual physical
contacts include handshakes or hugs or
sports, like wrestling, or by any of the other
ways in which we touch each other socially.
Other than the sexual contact, the AIDS virus
can also spread through blood-to-blood
contact with infected people or from an
infected mother to her baby during pregnancy
or through breast feeding.
We live in an environment that is full of
many other creatures apart from us. It is
inevitable that many diseases will be
transmitted by other animals. These animals
carry the infecting agents from a sick person
to another potential host. These animals are
thus the intermediaries and are called
vectors. The commonest vectors we all know
are mosquitoes. In many species of
mosquitoes, the females need highly
nutritious food in the form of blood in order
to be able to lay mature eggs. Mosquitoes feed
on many warm-blooded animals, including
us. In this way, they can transfer diseases
from person to person.
Fig. 13.3: Common methods of transmission of
diseases.
13.3.3 ORGAN-SPECIFIC AND TISSUE-
SPECIFIC MANIFESTATIONS
The disease-causing microbes enter the body
through these different means. Where do they
go then? The body is very large when
compared to the microbes. So there are many
possible places, organs or tissues, where they
could go. Do all microbes go to the same tissue
or organ, or do they go to different ones?
Different species of microbes seem to have
evolved to home in on different parts of the
body. In part, this selection is connected to
their point of entry. If they enter from the air
via the nose, they are likely to go to the lungs.
SCIENCE 184
This is seen in the bacteria causing
tuberculosis. If they enter through the mouth,
they can stay in the gut lining like typhoid-
causing bacteria. Or they can go to the liver,
like the viruses that cause jaundice.
But this neednt always be the case. An
infection like HIV, that comes into the body
via the sexual organs, will spread to lymph
nodes all over the body. Malaria-causing
microbes, entering through a mosquito bite,
will go to the liver, and then to the red blood
cells. The virus causing Japanese
encephalitis, or brain fever, will similarly enter
through a mosquito bite. But it goes on to
infect the brain.
The signs and symptoms of a disease will
thus depend on the tissue or organ which
the microbe targets. If the lungs are the
targets, then symptoms will be cough and
breathlessness. If the liver is targeted, there
will be jaundice. If the brain is the target, we
will observe headaches, vomiting, fits or
unconsciousness. We can imagine what the
symptoms and signs of an infection will be if
we know what the target tissue or organ is,
and the functions that are carried out by this
tissue or organ.
In addition to these tissue-specific effects
of infectious disease, there will be other
common effects too. Most of these common
effects depend on the fact that the bodys
immune system is activated in response to
infection. An active immune system recruits
many cells to the affected tissue to kill off the
disease-causing microbes. This recruitment
process is called inflammation. As a part of
this process, there are local effects such as
swelling and pain, and general effects such
as fever.
In some cases, the tissue-specificity of the
infection leads to very general-seeming
effects. For example, in HIV infection, the
virus goes to the immune system and
damages its function. Thus, many of the
effects of HIV-AIDS are because the body can
no longer fight off the many minor infections
that we face everyday. Instead, every small
cold can become pneumonia. Similarly, a
minor gut infection can produce major
diarrhoea with blood loss. Ultimately, it is
these other infections that kill people
suffering from HIV-AIDS.
It is also important to remember that the
severity of disease manifestations depend on
the number of microbes in the body. If the
number of microbes is very small, the disease
manifestations may be minor or unnoticed.
But if the number is of the same microbe
large, the disease can be severe enough to be
life-threatening. The immune system is a
major factor that determines the number of
microbes surviving in the body. We shall look
into this aspect a little later in the chapter.
13.3.4 PRINCIPLES OF TREATMENT
What are the steps taken by your family when
you fall sick? Have you ever thought why you
sometimes feel better if you sleep for some
time? When does the treatment involve
medicines?
Based on what we have learnt so far, it
would appear that there are two ways to treat
an infectious disease. One would be to reduce
the effects of the disease and the other to kill
the cause of the disease. For the first, we can
provide treatment that will reduce the
symptoms. The symptoms are usually
because of inflammation. For example, we can
take medicines that bring down fever, reduce
pain or loose motions. We can take bed rest so
that we can conserve our energy. This will
enable us to have more of it available to focus
on healing.
But this kind of symptom-directed
treatment by itself will not make the infecting
microbe go away and the disease will not be
cured. For that, we need to be able to kill off
the microbes.
How do we kill microbes? One way is to
use medicines that kill microbes. We have seen
earlier that microbes can be classified into
different categories. They are viruses, bacteria,
fungi or protozoa. Each of these groups of
organisms will have some essential
biochemical life process which is peculiar to
we can get some easy answers. For airborne
microbes, we can prevent exposure by
providing living conditions that are not
overcrowded. For water-borne microbes, we
can prevent exposure by providing safe
drinking water. This can be done by treating
the water to kill any microbial contamination.
For vector-borne infections, we can provide
clean environments. This would not, for
example, allow mosquito breeding. In other
words, public hygiene is one basic key to the
prevention of infectious diseases.
In addition to these issues that relate to
the environment, there are some other general
principles to prevent infectious diseases. To
appreciate those principles, let us ask a
question we have not looked at so far.
Normally, we are faced with infections
everyday. If someone is suffering from a cold
and cough in the class, it is likely that the
children sitting around will be exposed to the
infection. But all of them do not actually suffer
from the disease. Why not?
This is because the immune system of our
body is normally fighting off microbes. We
have cells that specialise in killing infecting
microbes. These cells go into action each time
infecting microbes enter the body. If they are
successful, we do not actually come down
with any disease. The immune cells manage
to kill off the infection long before it assumes
major proportions. As we noted earlier, if the
number of the infecting microbes is
controlled, the manifestations of disease will
be minor. In other words, becoming exposed
to or infected with an infectious microbe does
not necessarily mean developing noticeable
disease.
So, one way of looking at severe infectious
diseases is that it represents a lack of success
of the immune system. The functioning of the
immune system, like any other system in our
body, will not be good if proper and sufficient
nourishment and food is not available.
Therefore, the second basic principle of
prevention of infectious disease is the
availability of proper and sufficient food for
everyone.
that group and not shared with the other
groups. These processes may be pathways for
the synthesis of new substances or respiration.
These pathways will not be used by us
either. For example, our cells may make new
substances by a mechanism different from
that used by bacteria. We have to find a drug
that blocks the bacterial synthesis pathway
without affecting our own. This is what is
achieved by the antibiotics that we are all
familiar with. Similarly, there are drugs that
kill protozoa such as the malarial parasite.
One reason why making anti-viral
medicines is harder than making anti-
bacterial medicines is that viruses have few
biochemical mechanisms of their own. They
enter our cells and use our machinery for
their life processes. This means that there
are relatively few virus-specific targets to aim
at. Despite this limitation, there are now
effective anti-viral drugs, for example, the
drugs that keep HIV infection under control.
13.3.5 PRINCIPLES OF PREVENTION
All of what we have talked about so far deals
with how to get rid of an infection in someone
who has the disease. But there are three
limitations of this approach to dealing with
infectious disease. The first is that once
someone has a disease, their body functions
are damaged and may never recover
completely. The second is that treatment will
take time, which means that someone
suffering from a disease is likely to be
bedridden for some time even if we can give
proper treatment. The third is that the person
suffering from an infectious disease can serve
as the source from where the infection may
spread to other people. This leads to the
multiplication of the above difficulties. It is
because of such reasons that prevention of
diseases is better than their cure.
How can we prevent diseases? There are
two ways, one general and one specific to each
disease. The general ways of preventing
infections mostly relate to preventing
exposure. How can we prevent exposure to
infectious microbes?
If we look at the means of their spreading,
SCIENCE 186
Activity _____________13.6
Conduct a survey in your locality.
Talk to ten families who are well-off
and ten who are very poor (in your
estimation). Both sets of families
should have children who are below
five years of age. Measure the heights
of these children. Draw a graph of the
height of each child against its age
for both sets of families.
Is there a difference between the
groups? If yes, why?
If there is no difference, do you think
that your findings mean that being
well-off or poor does not matter for
health?
These are the general ways of preventing
infections. What are the specific ways? They
relate to a peculiar property of the immune
system that usually fights off microbial
infections. Let us cite an example to try and
understand this property.
These days, there is no smallpox
anywhere in the world. But as recently as a
hundred years ago, smallpox epidemics were
not at all uncommon. In such an epidemic,
people used to be very afraid of coming near
someone suffering from the disease since they
were afraid of catching the disease.
However, there was one group of people
who did not have this fear. These people would
provide nursing care for the victims of
smallpox. This was a group of people who had
had smallpox earlier and survived it, although
with a lot of scarring. In other words, if you
had smallpox once, there was no chance of
suffering from it again. So, having the disease
once was a means of preventing subsequent
attacks of the same disease.
This happens because when the immune
system first sees an infectious microbe, it
responds against it and then remembers it
specifically. So the next time that particular
microbe, or its close relatives enter the body,
the immune system responds with even
greater vigour. This eliminates the infection
even more quickly than the first time around.
This is the basis of the principle of
immunisation.
Immunisation
Traditional Indian and Chinese medicinal
systems sometimes deliberately rubbed the
skin crusts from smallpox victims into the
skin of healthy people. They thus hoped
to induce a mild form of smallpox that
would create resistance against the
disease.
Famously, two centuries ago, an
English physician
named Edward
Jenner, realised
that milkmaids
who had had
cowpox did not
catch smallpox
even during
e p i d e m i c s .
Cowpox is a very
mild disease.
Jenner tried
deliberately giving
cowpox to people
(as he can be seen doing in the picture), and
found that they were now resistant to
smallpox. This was because the smallpox
virus is closely related to the cowpox virus.
Cow is vacca in Latin, and cowpox is
vaccinia. From these roots, the word
vaccination has come into our usage.
We can now see that, as a general principle,
we can fool the immune system into
developing a memory for a particular infection
by putting something, that mimics the microbe
we want to vaccinate against, into the body.
This does not actually cause the disease but
this would prevent any subsequent exposure
to the infecting microbe from turning into
actual disease.
Many such vaccines are now available for
preventing a whole range of infectious
diseases, and provide a disease-specific
means of prevention. There are vaccines
against tetanus, diphtheria, whooping cough,
measles, polio and many others. These form
the public health programme of childhood
immunisation for preventing infectious
diseases.
Of course, such a programme can be
useful only if such health measures are
available to all children. Can you think of
reasons why this should be so?
Some hepatitis viruses, which cause
jaundice, are transmitted through water.
There is a vaccine for one of them, hepatitis
A, in the market. But the majority of children
in many parts of India are already immune
to hepatitis A by the time they are five years
old. This is because they are exposed to the
virus through water. Under these
circumstances, would you take the vaccine?
Activity _____________13.7
Rabies virus is spread by the bite of
infected dogs and other animals. There
are anti-rabies vaccines for both
Q
humans and animals. Find out the
plan of your local authority for
the control of rabies in your
neighbourhood. Are these measures
adequate? If not, what improvements
would you suggest?
uestions
1. Why are we normally advised to
take bland and nourishing food
when we are sick?
2. What are the different means by
which infectious diseases are
spread?
3. What precautions can you take
in your school to reduce the
incidence of infectious diseases?
4. What is immunisation?
5. What are the immunisation
programmes available at the
nearest health centre in your
locality? Which of these diseases are the major health problems in your area?
What
you have
learnt
Health is a state of physical, mental and social well-being.
The health of an individual is dependent on his/her physical
surroundings and his/her economic status.
Diseases are classified as acute or chronic, depending on their
duration.
Disease may be due to infectious or non-infectious causes.
Infectious agents belong to different categories of organisms
and may be unicellular and microscopic or multicellular.
The category to which a disease-causing organism belongs
decides the type of treatment.
Infectious agents are spread through air, water, physical contact
or vectors.
Prevention of disease is more desirable than its successful
treatment.
Infectious diseases can be prevented by public health hygiene
SCIENCE 188
measures that reduce exposure to infectious agents.
Infectious diseases can also be prevented by using
immunisation.
Effective prevention of infectious diseases in the community
requires that everyone should have access to public hygiene
and immunisation.
Exercises
1. How many times did you fall ill in the last one year? What were
the illnesses?
(a) Think of one change you could make in your habits in order
to avoid any of/most of the above illnesses.
(b) Think of one change you would wish for in your
surroundings in order to avoid any of/most of the above
illnesses.
2. A doctor/nurse/health-worker is exposed to more sick people
than others in the community. Find out how she/he avoids
getting sick herself/himself.
3. Conduct a survey in your neighbourhood to find out what the
three most common diseases are. Suggest three steps that could
be taken by your local authorities to bring down the incidence
of these diseases.
4. A baby is not able to tell her/his caretakers that she/he is
sick. What would help us to find out
(a) that the baby is sick?
(b) what is the sickness?
5. Under which of the following conditions is a person most likely
to fall sick?
(a) when she is recovering from malaria.
(b) when she has recovered from malaria and is taking care of
someone suffering from chicken-pox.
(c) when she is on a four-day fast after recovering from malaria
and is taking care of someone suffering from chicken-pox.
Why?
6. Under which of the following conditions are you most likely to
fall sick?
(a) when you are taking examinations.
(b) when you have travelled by bus and train for two days.
(c) when your friend is suffering from measles.
Why?
Our planet, Earth is the only one on which
life, as we know it, exists. Life on Earth is
dependent on many factors. Most life-forms
we know need an ambient temperature,
water, and food. The resources available on
the Earth and the energy from the Sun are
necessary to meet the basic requirements of
all life-forms on the Earth.
What are these resources on the Earth?
These are the land, the water and the air.
The outer crust of the Earth is called the
lithosphere. Water covers 75% of the Earths
surface. It is also found underground. These
comprise the hydrosphere. The air that covers
the whole of the Earth like a blanket, is called
the atmosphere. Living things are found
where these three exist. This life-supporting
zone of the Earth where the atmosphere, the
hydrosphere and the lithosphere interact and
make life possible, is known as the biosphere.
Living things constitute the biotic
component of the biosphere. The air, the
water and the soil form the non-living or
abiotic component of the biosphere. Let us
study these abiotic components in detail in
order to understand their role in sustaining
life on Earth.
14.1 The Breath of Life: Air
We have already talked about the composition
of air in the first chapter. It is a mixture of
many gases like nitrogen, oxygen, carbon
dioxide and water vapour. It is interesting to
note that even the composition of air is the
result of life on Earth. In planets such as
Venus and Mars, where no life is known to
exist, the major component of the atmosphere
is found to be carbon dioxide. In fact, carbon
dioxide constitutes up to 95-97% of the
atmosphere on Venus and Mars.
Eukaryotic cells and many prokaryotic
cells, discussed in Chapter 5, need oxygen to
break down glucose molecules and get energy
for their activities. This results in the
production of carbon dioxide. Another process
which results in the consumption of oxygen
and the concomitant production of carbon
dioxide is combustion. This includes not just
human activities, which burn fuels to get
energy, but also forest fires.
Despite this, the percentage of carbon
dioxide in our atmosphere is a mere fraction
of a percent because carbon dioxide is fixed
in two ways: (i) Green plants convert carbon
dioxide into glucose in the presence of
Sunlight and (ii) many marine animals use
carbonates dissolved in sea-water to make
their shells.
14.1.1 THE ROLE OF THE ATMOSPHERE IN
CLIMATE CONTROL
We have talked of the atmosphere covering
the Earth, like a blanket. We know that air is
a bad conductor of heat. The atmosphere
keeps the average temperature of the Earth
fairly steady during the day and even during
the course of the whole year. The atmosphere
prevents the sudden increase in temperature
during the daylight hours. And during the
night, it slows down the escape of heat into
outer space. Think of the moon, which is
about the same distance from the Sun that
the Earth is. Despite that, on the surface of
the moon, with no atmosphere, the
temperature ranges from 190 C to 110 C.
14 14
14 14 14
N N
N NNATURAL ATURAL ATURAL ATURAL ATURAL R R
R RRESOURCES ESOURCES ESOURCES ESOURCES ESOURCES
Chapter
SCIENCE 190
the heating of water bodies and the activities
of living organisms. The atmosphere can be
heated from below by the radiation that is
reflected back or re-radiated by the land or
water bodies. On being heated, convection
currents are set up in the air. In order to gain
some understanding of the nature of
convection currents, let us perform the
following activity:
Activity _____________14.2
Place a candle in a beaker or wide-
mouthed bottle and light it. Light an
incense stick and take it to the mouth
of the above bottle (Figure 14.1).
Which way does the smoke flow when
the incense stick is kept near the edge
of the mouth?
the incense stick is kept a little above
the candle?
the incense stick is kept in other
regions?
Activity _____________14.1
Measure the temperature of the
following :
Take (i) a beaker full of water, (ii) a
beaker full of soil/sand and (iii) a closed
bottle containing a thermometer. Keep
them in bright Sunlight for three hours.
Now measure the temperature of all 3
vessels. Also, take the temperature
reading in shade at the same time.
Now answer
1. Is the temperature reading more in
activity (i) or (ii)?
2. Based on the above finding, which
would become hot faster the land or
the sea?
3. Is the thermometer reading of the
temperature of air (in shade) the same
as the temperature of sand or water?
What do you think is the reason for
this? And why does the temperature
have to be measured in the shade?
4. Is the temperature of air in the closed
glass vessel/bottle the same as the
temperature taken in open air? (i) What
do you think is the reason for this?
(ii) Do we ever come across this
phenomenon in daily life?
As we have seen above, sand and water
do not heat up at the same rate. What do you
think will be their rates of cooling? Can we
think of an experiment to test the prediction?
14.1.2 THE MOVEMENT OF AIR: WINDS
We have all felt the relief brought by cool
evening breezes after a hot day. And
sometimes, we are lucky enough to get rains
after some days of really hot weather. What
causes the movement of air, and what decides
whether this movement will be in the form of
a gentle breeze, a strong wind or a terrible
storm? What brings us the welcome rains?
All these phenomena are the result of
changes that take place in our atmosphere
due to the heating of air and the formation of
water vapour. Water vapour is formed due to
Fig. 14.1: Air currents being caused by the uneven
heating of air.
The patterns revealed by the smoke show
us the directions in which hot and cold air
move. In a similar manner, when air is heated
by radiation from the heated land or water, it
rises. But since land gets heated faster than
water, the air over land would also be heated
faster than the air over water bodies.
So, if we look at the situation in coastal
regions during the day, the air above the land
NATURAL RESOURCES 191
gets heated faster and starts rising. As this
air rises, a region of low pressure is created
and air over the sea moves into this area of
low pressure. The movement of air from one
region to the other creates winds. During the
day, the direction of the wind would be from
the sea to the land.
At night, both land and sea start to cool.
Since water cools down slower than the land,
the air above water would be warmer than
the air above land.
On the basis of the above discussion, what
can you say about:
1. the appearance of areas of low and
high pressure in coastal areas at night?
2. the direction in which air would flow
at night in coastal areas?
Similarly, all the movements of air
resulting in diverse atmospheric phenomena
are caused by the uneven heating of the
atmosphere in different regions of the Earth.
But various other factors also influence these
winds the rotation of the Earth and the
presence of mountain ranges in the paths of
the wind are a couple of these factors. We
will not go into these factors in detail in this
chapter, but think about this: how do the
presence of the Himalayas change the flow of
a wind blowing from Allahabad towards the
north?
14.1.3 RAIN
Let us go back now to the question of how
clouds are formed and bring us rain. We could
start by doing a simple experiment which
demonstrates some of the factors influencing
these climatic changes.
Activity _____________14.3
Take an empty bottle of the sort in
which bottled water is sold. Pour about
5-10 mL of water into it and close the
bottle tightly. Shake it well or leave it
out in the Sun for ten minutes. This
causes the air in the bottle to be
saturated with water vapour.
Now, take a lighted incense stick. Open
the cap of the bottle and allow some of
the smoke from the incense stick to
enter the bottle. Quickly close the bottle
once more. Make sure that the cap is
fitting tightly. Press the bottle hard
between your hands and crush it as
much as possible. Wait for a few
seconds and release the bottle. Again
press the bottle as hard as you can.
Now answer
1. When did you observe that the air
inside seemed to become foggy?
2. When does this fog disappear?
3. When is the pressure inside the bottle
higher?
4. Is the fog observed when the pressure
in the bottle is high or when it is low?
5. What is the need for smoke particles
inside the bottle for this experiment?
6. What might happen if you do the
experiment without the smoke from the
incense stick? Now try it and check if
the prediction was correct. What might
be happening in the above experiment
in the absence of smoke particles?
The above experiment replicates, on a very
small scale, what happens when air with a
very high content of water vapour goes from
a region of high pressure to a region of low
pressure or vice versa.
When water bodies are heated during the
day, a large amount of water evaporates and
goes into the air. Some amount of water
vapour also get into the atmosphere because
of various biological activities. This air also
gets heated. The hot air rises up carrying the
water vapour with it. As the air rises, it
expands and cools. This cooling causes the
water vapour in the air to condense in the
form of tiny droplets. This condensation of
water is facilitated if some particles could act
as the nucleus for these drops to form
around. Normally dust and other suspended
particles in the air perform this function.
Once the water droplets are formed, they
grow bigger by the condensation of these
water droplets. When the drops have grown
big and heavy, they fall down in the form of
rain. Sometimes, when the temperature of air
SCIENCE 192
14.1.4 AIR POLLUTION
We keep hearing of the increasing levels of
oxides of nitrogen and sulphur in the news.
People often bemoan the fact that the quality
of air has gone down since their childhood.
How is the quality of air affected and how
does this change in quality affect us and other
life forms?
The fossil fuels like coal and petroleum
contain small amounts of nitrogen and
sulphur. When these fuels are burnt, nitrogen
and sulphur too are burnt and this produces
different oxides of nitrogen and sulphur. Not
only is the inhalation of these gases
dangerous, they also dissolve in rain to give
rise to acid rain. The combustion of fossil fuels
also increases the amount of suspended
particles in air. These suspended particles
could be unburnt carbon particles or
substances called hydrocarbons. Presence of
high levels of all these pollutants cause
visibility to be lowered, especially in cold
weather when water also condenses out of
air. This is known as smog and is a visible
indication of air pollution. Studies have
shown that regularly breathing air that
contains any of these substances increases
the incidence of allergies, cancer and heart
diseases. An increase in the content of these
harmful substances in air is called air
pollution.
is low enough, precipitation may occur in the
form of snow, sleet or hail.
Rainfall patterns are decided by the
prevailing wind patterns. In large parts of
India, rains are mostly brought by the south-
west or north-east monsoons. We have also
heard weather reports that say depressions
in the Bay of Bengal have caused rains in
some areas (Figure 14.2).
Activity _____________14.4
Collect information from newspapers
or weather reports on television about
rainfall patterns across the country.
Also find out how to construct a rain-
gauge and make one. What precautions
are necessary in order to get reliable
data from this rain-gauge? Now answer
the following questions :
In which month did your city/town/
village get the maximum rainfall?
In which month did your state/union
territory get the maximum rainfall?
Is rain always accompanied by thunder
and lightning? If not, in which season
do you get more of thunder and
lightning with the rain?
Activity _____________14.5
Find out more about monsoons and
cyclones from the library. Try and find
out the rainfall pattern of any other
country. Is the monsoon responsible for
rains the world over?
Fig. 14.2: Satellite picture showing clouds over India.
Fig. 14.3: Lichen
people are forced to spend considerable
amounts of time in fetching water from far-
away sources.
Activity _____________14.7
Many municipal corporations are trying
water -harvesting techniques to
improve the availability of water.
Find out what these techniques are and
how they would increase the water that
is available for use.
But why is water so necessary? And do
all organisms require water? All cellular
processes take place in a water medium. All
the reactions that take place within our body
and within the cells occur between
substances that are dissolved in water.
Substances are also transported from one
part of the body to the other in a dissolved
form. Hence, organisms need to maintain the
level of water within their bodies in order to
stay alive. Terrestrial life-forms require fresh
water for this because their bodies cannot
tolerate or get rid of the high amounts of
dissolved salts in saline water. Thus, water
sources need to be easily accessible for
animals and plants to survive on land.
Activity _____________14.8
Select a small area (say, 1 m
2
) near a
water-body, it may be a river, stream,
lake or pond. Count the number of
different animals and plants in this
area. Also, check the number of
individuals of each type or species.
Compare this with the number of
individuals (both animals and plants)
found in an area of the same size in a
dry, rocky region.
Is the variety of plant and animal life
the same in both these areas?
Activity _____________14.9
Select and mark out a small area (about
1 m
2
) in some unused land in or near
your school.
As in the above activity, count the
number of different animals and plants
in this area and the number of
individuals of each species.
Activity _____________14.6
Organisms called lichens are found to
be very sensitive to the levels of
contaminants like sulphur dioxide in
the air. As discussed earlier in section
7.3.3, lichens can be commonly found
growing on the barks of trees as a thin
greenish-white crust. See if you can
find lichen growing on the trees in your
locality.
Compare the lichen on trees near busy
roads and trees some distance away.
On the trees near roads, compare the
incidence of lichen on the side facing
the road and on the side away from the
road.
What can you say about the levels of
polluting substances near roads and away
from roads on the basis of your findings
above?
uestions
1. How is our atmosphere different
from the atmospheres on Venus
and Mars?
2. How does the atmosphere act as
a blanket?
3. What causes winds?
4. How are clouds formed?
5. List any three human activities
that you think would lead to air
pollution.
14.2 Water: A Wonder Liquid
Water occupies a very large area of the Earths
surface and is also found underground. Some
amount of water exists in the form of water
vapour in the atmosphere. Most of the water
on Earths surface is found in seas and oceans
and is saline. Fresh water is found frozen in
the ice-caps at the two poles and on snow-
covered mountains. The underground water
and the water in rivers, lakes and ponds is
also fresh. However, the availability of fresh
water varies from place to place. Practically
every summer, most places have to face a
shortage of water. And in rural areas, where
water supply systems have not been installed,
Q
SCIENCE 194
Remember to do this in the same place
twice in a year, once during summer
or the dry season and once after it has
rained.
Now answer
1. Were the numbers similar both times?
2. In which season did you find more
variety of plants and animals?
3. In which season did you find more
number of individuals of each variety?
After compiling the results of the above
two activities, think if there is any relationship
between the amount of available water and
the number and variety of plants and animals
that can live in a given area. If there is a
relationship, where do you think you would
find a greater variety and abundance of life
in a region that receives 5 cm of rainfall in a
year or a region that receives 200 cm of
rainfall in a year? Find the map showing
rainfall patterns in the atlas and predict
which States in India would have the
maximum biodiversity and which would have
the least. Can we think of any way of checking
whether the prediction is correct?
The availability of water decides not only
the number of individuals of each species that
are able to survive in a particular area, but it
also decides the diversity of life there. Of
course, the availability of water is not the only
factor that decides the sustainability of life
in a region. Other factors like the temperature
and nature of soil also matter. But water is
one of the major resources which determine
life on land.
14.2.1 WATER POLLUTION
Water dissolves the fertilisers and pesticides
that we use on our farms. So some percentage
of these substances are washed into the water
bodies. Sewage from our towns and cities and
the waste from factories are also dumped into
rivers or lakes. Specific industries also use
water for cooling in various operations and
later return this hot water to water-bodies.
Another manner in which the temperature of
the water in rivers can be affected is when water
is released from dams. The water inside the
deep reservoir would be colder than the water
at the surface which gets heated by the Sun.
All this can affect the life-forms that are
found in these water bodies in various ways.
It can encourage the growth of some life-forms
and harm some other life-forms. This affects
the balance between various organisms which
had been established in that system. So we
use the term water-pollution to cover the
following effects:
1. The addition of undesirable
substances to water-bodies. These
substances could be the fertilisers and
pesticides used in farming or they
could be poisonous substances, like
mercury salts which are used by
paper-industries. These could also be
disease-causing organisms, like the
bacteria which cause cholera.
2. The removal of desirable substances
from water-bodies. Dissolved oxygen
is used by the animals and plants that
live in water. Any change that reduces
the amount of this dissolved oxygen
would adversely affect these aquatic
organisms. Other nutrients could also
be depleted from the water bodies.
3. A change in temperature. Aquatic
organisms are used to a certain range
of temperature in the water-body
where they live, and a sudden marked
change in this temperature would be
dangerous for them or affect their
breeding. The eggs and larvae of
various animals are particularly
susceptible to temperature changes.
uestions
1. Why do organisms need water?
2. What is the major source of fresh
water in the city/town/village
where you live?
3. Do you know of any activity
which may be polluting this water
source?
Q
14.3 Mineral Riches in the Soil
Soil is an important resource that decides the
diversity of life in an area. But what is the
soil and how is it formed? The outermost layer
of our Earth is called the crust and the
minerals found in this layer supply a variety
of nutrients to life-forms. But these minerals
will not be available to the organisms if the
minerals are bound up in huge rocks. Over
long periods of time, thousands and millions
of years, the rocks at or near the surface of
the Earth are broken down by various
physical, chemical and some biological
processes. The end product of this breaking
down is the fine particles of soil. But what
are the factors or processes that make soil?
The Sun: The Sun heats up rocks
during the day so that they expand.
At night, these rocks cool down and
contract. Since all parts of the rock
do not expand and contract at the
same rate, this results in the
formation of cracks and ultimately the
huge rocks break up into smaller
pieces.
Water: Water helps in the formation
of soil in two ways. One, water could
get into the cracks in the rocks formed
due to uneven heating by the Sun. If
this water later freezes, it would cause
the cracks to widen. Can you think
why this should be so? Two, flowing
water wears away even hard rock over
long periods of time. Fast flowing water
often carries big and small particles
of rock downstream. These rocks rub
against other rocks and the resultant
abrasion causes the rocks to wear
down into smaller and smaller
particles. The water then takes these
particles along with it and deposits it
further down its path. Soil is thus
found in places far away from its
parent-rock.
Wind: In a process similar to the way
in which water rubs against rocks and
wears them down, strong winds also
erode rocks down. The wind also
carries sand from one place to the
other like water does.
Living organisms also influence the
formation of soil. The lichen that we
read about earlier, also grows on the
surface of rocks. While growing, they
release certain substances that cause
the rock surface to powder down and
form a thin layer of soil. Other small
plants like moss, are able to grow on
this surface now and they cause the
rock to break up further. The roots of
big trees sometimes go into cracks in
the rocks and as the roots grow bigger,
the crack is forced bigger.
Activity ____________14.10
Take some soil and put it into a beaker
containing water. The water should be
at least five times the amount of soil
taken. Stir the soil and water vigorously
and allow the soil to settle down.
Observe after some time.
Is the soil at the bottom of the beaker
homogenous or have layers formed?
If layers have formed, how is one layer
different from another?
Is there anything floating on the
surface of the water?
Do you think some substances would
have dissolved in the water? How would
you check?
As you have seen, soil is a mixture. It
contains small particles of rock (of different
sizes). It also contains bits of decayed living
organisms which is called humus. In addition,
soil also contains various forms of
microscopic life. The type of soil is decided
by the average size of particles found in it
and the quality of the soil is decided by the
amount of humus and the microscopic
organisms found in it. Humus is a major
factor in deciding the soil structure because
it causes the soil to become more porous and
allows water and air to penetrate deep
underground. The mineral nutrients that are
found in a particular soil depends on the
rocks it was formed from. The nutrient
content of a soil, the amount of humus
present in it and the depth of the soil are
SCIENCE 196
some of the factors that decide which plants
will thrive on that soil. Thus, the topmost
layer of the soil that contains humus and
living organisms in addition to the soil
particles is called the topsoil. The quality of
the topsoil is an important factor that decides
biodiversity in that area.
Modern farming practices involve the use
of large amounts of fertilizers and pesticides.
Use of these substances over long periods of
time can destroy the soil structure by killing
the soil micro-organisms that recycle
nutrients in the soil. It also kills the
Earthworms which are instrumental in
making the rich humus. Fertile soil can
quickly be turned barren if sustainable
practices are not followed. Removal of useful
components from the soil and addition of
other substances, which adversely affect the
fertility of the soil and kill the diversity of
organisms that live in it, is called soil pollution.
The soil that we see today in one place
has been created over a very long period of
time. However, some of the factors that
created the soil in the first place and brought
the soil to that place may be responsible for
the removal of the soil too. The fine particles
of soil may be carried away by flowing water
or wind. If all the soil gets washed away and
the rocks underneath are exposed, we have
lost a valuable resource because very little
will grow on the rock.
Activity ____________14.11
Take two identical trays and fill them
with soil. Plant mustard or green gram
or paddy in one of the trays and water
both the trays regularly for a few days,
till the first tray is covered by plant
growth. Now, tilt both the trays and fix
them in that position. Make sure that
both the trays are tilted at the same
angle. Pour equal amount of water
gently on both trays such that the water
flows out of the trays (Fig. 14.4).
Study the amount of soil that is carried
out of the trays. Is the amount the
same in both the trays?
Now pour equal amounts of water on
both the trays from a height. Pour three
or four times the amount that you
poured earlier.
Study the amount of soil that is
carried out of the trays now. Is the
amount the same in both the trays?
Is the amount of soil that is carried out
more or less or equal to the amount
washed out earlier?
Fig. 14.4: Effect of flowing water on the top-soil
The roots of plants have an important role
in preventing soil erosion. The large-scale
deforestation that is happening all over the
world not only destroys biodiversity, it also
leads to soil erosion. Topsoil that is bare of
vegetation, is likely to be removed very
quickly. And this is accelerated in hilly or
mountainous regions. This process of soil
erosion is very difficult to reverse. Vegetative
cover on the ground has a role to play in the
percolation of water into the deeper
layers too.
uestions
1. How is soil formed?
2. What is soil erosion?
3. What are the methods of
preventing or reducing soil
erosion?
14.4 Biogeochemical Cycles
A constant interaction between the biotic and
abiotic components of the biosphere makes
it a dynamic, but stable system. These
interactions consist of a transfer of matter
and energy between the different components
of the biosphere. Let us look at some
processes involved in the maintenance of the
above balance.
Q
14.4.1 THE WATER-CYCLE
You have seen how the water evaporates from
the water bodies and subsequent
condensation of this water vapour leads to
rain. But we dont see the seas and oceans
drying up. So, how is the water returning to
these water bodies? The whole process in
which water evaporates and falls on the land
as rain and later flows back into the sea via
rivers is known as the water-cycle. This cycle
is not as straight-forward and simple as this
statement seems to imply. All of the water
that falls on the land does not immediately
flow back into the sea. Some of it seeps into
the soil and becomes part of the underground
reservoir of fresh-water. Some of this
underground water finds its way to the
surface through springs. Or we bring it to
the surface for our use through wells or tube-
wells. Water is also used by terrestrial animals
and plants for various life-processes
(Fig. 14.5).
water. Thus rivers carry many nutrients from
the land to the sea, and these are used by
the marine organisms.
14.4.2 THE NITROGEN-CYCLE
Nitrogen gas makes up 78% of our
atmosphere and nitrogen is also a part of
many molecules essential to life like proteins,
nucleic acids (DNA and RNA) and some
vitamins. Nitrogen is found in other
biologically important compounds such as
alkaloids and urea too. Nitrogen is thus an
essential nutrient for all life-forms and life
would be simple if all these life-forms could
use the atmospheric nitrogen directly.
However, other than a few forms of bacteria,
life-forms are not able to convert the
comparatively inert nitrogen molecule into
forms like nitrates and nitrites which can be
taken up and used to make the required
molecules. These nitrogen-fixing bacteria
may be free-living or be associated with some
species of dicot plants. Most commonly, the
nitrogen-fixing bacteria are found in the roots
of legumes (generally the plants which give
us pulses) in special structures called root-
nodules. Other than these bacteria, the only
other manner in which the nitrogen molecule
is converted to nitrates and nitrites is by a
physical process. During lightning, the high
temperatures and pressures created in the
air convert nitrogen into oxides of nitrogen.
These oxides dissolve in water to give nitric
and nitrous acids and fall on land along with
rain. These are then utilised by various life-
forms.
What happens to the nitrogen once it is
converted into forms that can be taken up
and used to make nitrogen-containing
molecules? Plants generally take up nitrates
and nitrites and convert them into amino
acids which are used to make proteins. Some
other biochemical pathways are used to make
the other complex compounds containing
nitrogen. These proteins and other complex
compounds are subsequently consumed by
animals. Once the animal or the plant dies,
other bacteria in the soil convert the various
compounds of nitrogen back into nitrates and
Fig. 14.5: Water-cycle in nature
Let us look at another aspect of what
happens to water during the water-cycle. As
you know, water is capable of dissolving a
large number of substances. As water flows
through or over rocks containing soluble
minerals, some of them get dissolved in the
SCIENCE 198
nitrites. A different type of bacteria converts
the nitrates and nitrites into elemental
nitrogen. Thus, there is a nitrogen-cycle in
nature in which nitrogen passes from its
elemental form in the atmosphere into simple
molecules in the soil and water, which get
converted to more complex molecules in living
beings and back again to the simple nitrogen
molecule in the atmosphere.
14.4.3 THE CARBON-CYCLE
Carbon is found in various forms on the
Earth. It occurs in the elemental form as
diamonds and graphite. In the combined
state, it is found as carbon dioxide in the
atmosphere, as carbonate and hydrogen-
carbonate salts in various minerals, while all
life-forms are based on carbon-containing
molecules like proteins, carbohydrates, fats,
Fig.14.6: Nitrogen-cycle in nature
nucleic acids and vitamins. The endoskeletons
and exoskeletons of various animals are also
formed from carbonate salts. Carbon is
incorporated into life-forms through the basic
process of photosynthesis which is performed
in the presence of Sunlight by all life-forms that
contain chlorophyll. This process converts
carbon dioxide from the atmosphere or
dissolved in water into glucose molecules.
These glucose molecules are either converted
into other substances or used to provide
energy for the synthesis of other biologically
important molecules (Fig. 14.7).
The utilisation of glucose to provide energy
to living things involves the process of
respiration in which oxygen may or may not
be used to convert glucose back into carbon
dioxide. This carbon dioxide then goes back
into the atmosphere. Another process that
adds to the carbon dioxide in the atmosphere
is the process of combustion where fuels are
burnt to provide energy for various needs like
heating, cooking, transportation and
industrial processes. In fact, the percentage
of carbon dioxide in the atmosphere is said
to have doubled since the industrial
revolution when human beings started
burning fossil fuels on a very large scale.
Carbon, like water, is thus cycled repeatedly
through different forms by the various
physical and biological activities.
14.4.3 (i) THE GREENHOUSE EFFECT
Recall the reading taken by you under (iii) in
Activity 14.1. Heat is trapped by glass, and
hence the temperature inside a glass
enclosure will be much higher than the
surroundings. This phenomenon was used
to create an enclosure where tropical plants
Fig. 14.7: Carbon-cycle in nature
could be kept warm during the winters in
colder climates. Such enclosures are called
greenhouses. Greenhouses have also lent
their name to an atmospheric phenomenon.
Some gases prevent the escape of heat from
the Earth. An increase in the percentage of
such gases in the atmosphere would cause
the average temperatures to increase world-
wide and this is called the greenhouse effect.
Carbon dioxide is one of the greenhouse
gases. An increase in the carbon dioxide
content in the atmosphere would cause more
heat to be retained by the atmosphere and
lead to global warming.
Activity ____________14.12
Find out what the consequences of
global warming would be.
Also, find out the names of some other
greenhouse gases.
SCIENCE 200
14.4.4 THE OXYGEN-CYCLE
Oxygen is a very abundant element on our
Earth. It is found in the elemental form in
the atmosphere to the extent of 21%. It also
occurs extensively in the combined form in
the Earths crust as well as also in the air in
the form of carbon dioxide. In the crust, it is
found as the oxides of most metals and
silicon, and also as carbonate, sulphate,
nitrate and other minerals. It is also an
essential component of most biological
molecules like carbohydrates, proteins,
nucleic acids and fats (or lipids).
But when we talk of the oxygen-cycle, we
are mainly referring to the cycle that
maintains the levels of oxygen in the
atmosphere. Oxygen from the atmosphere is
used up in three processes, namely
combustion, respiration and in the formation
of oxides of nitrogen. Oxygen is returned to
the atmosphere in only one major process,
that is, photosynthesis. And this forms the
broad outline of the oxygen-cycle in nature
(Fig. 14.8).
bacteria, are poisoned by elemental oxygen.
In fact, even the process of nitrogen-fixing by
bacteria does not take place in the presence
of oxygen.
14.5 Ozone Layer
Elemental oxygen is normally found in the
form of a diatomic molecule. However, in the
upper reaches of the atmosphere, a molecule
containing three atoms of oxygen is found.
This would mean a formula of O
3
and this is
called ozone. Unlike the normal diatomic
molecule of oxygen, ozone is poisonous and
we are lucky that it is not stable nearer to
the Earths surface. But it performs an
essential function where it is found. It absorbs
harmful radiations from the Sun. This
prevents those harmful radiations from
reaching the surface of the Earth where they
may damage many forms of life.
Recently it was discovered that this ozone
layer was getting depleted. Various man-made
compounds like CFCs (carbon compounds
having both fluorine and chlorine which are
very stable and not degraded by any biological
process) were found to persist in the
atmosphere. Once they reached the ozone
layer, they would react with the ozone
molecules. This resulted in a reduction of the
ozone layer and recently they have discovered
a hole in the ozone layer above the Antartica.
It is difficult to imagine the consequences for
life on Earth if the ozone layer dwindles
further, but many people think that it would
be better not to take chances. These people
advocate working towards stopping all further
damage to the ozone layer.
Fig. 14.8: Oxygen-cycle in nature
Though we usually think of oxygen as
being necessary to life in the process of
respiration, it might be of interest to you to
learn that some forms of life, especially
Fig. 14.9: Satellite picture showing the hole (magenta
colour) in the ozone layer over Antartica
October
1980
October
1985
October
1990
Activity ____________14.13
Find out which other molecules are
thought to damage the ozone layer.
Newspaper reports often talk about the
hole in the ozone layer.
Find out whether the size of this hole
is changing and in what manner
scientists think this would affect life
on Earth (Fig. 14.9).
Q
What
you have
learnt
Life on Earth depends on resources like soil, water and air,
and energy from the Sun.
Uneven heating of air over land and water-bodies causes winds.
Evaporation of water from water-bodies and subsequent
condensation give us rain.
Rainfall patterns depend on the prevailing wind patterns in an
area.
Various nutrients are used again and again in a cyclic fashion.
This leads to a certain balance between the various components
of the biosphere.
Pollution of air, water and soil affect the quality of life and
harm the biodiversity.
We need to conserve our natural resources and use them in a
sustainable manner.
Exercises
1. Why is the atmosphere essential for life?
2. Why is water essential for life?
3. How are living organisms dependent on the soil? Are organisms
that live in water totally independent of soil as a resource?
4. You have seen weather reports on television and in newspapers.
How do you think we are able to predict the weather?
uestions
1. What are the different states in
which water is found during the
water cycle?
2. Name two biologically important
compounds that contain both
oxygen and nitrogen.
3. List any three human activities
which would lead to an increase
in the carbon dioxide content of air.
4. What is the greenhouse effect?
5. What are the two forms of
oxygen found in the atmosphere?
SCIENCE 202
5. We know that many human activities lead to increasing
levels of pollution of the air, water-bodies and soil. Do you
think that isolating these activities to specific and limited
areas would help in reducing pollution?
6. Write a note on how forests influence the quality of our air,
soil and water resources.
We know that all living organisms need food.
Food supplies proteins, carbohydrates, fats,
vitamins and minerals, all of which we require
for body development, growth and health.
Both plants and animals are major sources
of food for us. We obtain most of this food
from agriculture and animal husbandry.
We read in newspapers that efforts are
always being made to improve production
from agriculture and animal husbandry. Why
is this necessary? Why we cannot make do
with the current levels of production?
India is a very populous country. Our
population is more than one billion people,
and it is still growing. As food for this growing
population, we will soon need more than a
quarter of a billion tonnes of grain every year.
This can be done by farming on more land.
But India is already intensively cultivated. As
a result, we do not have any major scope for
increasing the area of land under cultivation.
Therefore, it is necessary to increase our
production efficiency for both crops and
livestock.
Efforts to meet the food demand by
increasing food production have led to some
successes so far. We have had the green
revolution, which contributed to increased
food-grain production. We have also had the
white revolution, which has led to better and
more efficient use as well as availability of milk.
However, these revolutions mean that our
natural resources are getting used more
intensively. As a result, there are more
chances of causing damage to our natural
resources to the point of destroying their
balance completely. Therefore, it is important
that we should increase food production
without degrading our environment and
disturbing the balances maintaining it.
Hence, there is a need for sustainable
practices in agriculture and animal
husbandry.
Also, simply increasing grain production
for storage in warehouses cannot solve the
problem of malnutrition and hunger. People
should have money to purchase food. Food
security depends on both availability of food
and access to it. The majority of our
population depends on agriculture for their
livelihood. Increasing the incomes of people
working in agriculture is therefore necessary
to combat the problem of hunger. Scientific
management practices should be undertaken
to obtain high yields from farms. For
sustained livelihood, one should undertake
mixed farming, intercropping, and integrated
farming practices, for example, combine
agriculture with livestock/poultry/fisheries/
bee-keeping.
The question thus becomes how do we
increase the yields of crops and livestock?
15.1 Improvement in Crop Yields
Cereals such as wheat, rice, maize, millets
and sorghum provide us carbohydrate for
energy requirement. Pulses like gram (chana),
pea (matar), black gram (urad), green gram
(moong), pigeon pea (arhar), lentil (masoor),
provide us with protein. And oil seeds
including soyabean, ground nut, sesame,
castor, mustard, linseed and sunflower
provide us with necessary fats (Fig. 15.1).
Vegetables, spices and fruits provide a range
of vitamins and minerals in addition to small
amounts of proteins, carbohydrates and fats.
In addition to these food crops, fodder crops
like berseem, oats or sudan grass are raised
as food for the livestock.
15 15
15 15 15
I II IIMPROVEMENT MPROVEMENT MPROVEMENT MPROVEMENT MPROVEMENT IN IN IN IN IN F FF FFOOD OOD OOD OOD OOD R RR RRESOURCES ESOURCES ESOURCES ESOURCES ESOURCES
Chapter
SCIENCE 204
the kharif season from the month of June to
October, and some of the crops are grown in
the winter season, called the rabi season from
November to April. Paddy, soyabean, pigeon
pea, maize, cotton, green gram and black
gram are kharif crops, whereas wheat, gram,
peas, mustard, linseed are rabi crops.
In India there has been a four times
increase in the production of food grains from
1960 to 2004 with only 25% increase in the
cultivable land area. How has this increase
in production been achieved? If we think of
the practices involved in farming, we can see
that we can divide it into three stages. The
first is the choice of seeds for planting. The
second is the nurturing of the crop plants.
The third is the protection of the growing and
harvested crops from loss. Thus, the major
groups of activities for improving crop yields
can be classified as:
Crop variety improvement
Crop production improvement
Crop protection management.
15.1.1 CROP VARIETY IMPROVEMENT
This approach depends on finding a crop
variety that can give a good yield. Varieties or
strains of crops can be selected by breeding
for various useful characteristics such as
disease resistance, response to fertilisers,
product quality and high yields. One way of
incorporating desirable characters into crop
varieties is by hybridisation. Hybridisation
refers to crossing between genetically
dissimilar plants. This crossing may be
intervarietal (between different varieties),
interspecific (between two different species of
the same genus) or intergeneric (between
different genera). Another way of improving
the crop is by introducing a gene that would
provide the desired characteristic. This
results in genetically modified crops.
For new varieties of crops to be accepted,
it is necessary that the variety produces high
yields under different conditions that are
found in different areas. Farmers would need
to be provided with good quality seeds of a
particular variety, that is, the seeds should
Fig. 15.1: Different types of crops
uestion
1. What do we get from cereals,
pulses, fruits and vegetables?
Different crops require different climatic
conditions, temperature and photoperiods for
their growth and completion of their life cycle.
Photoperiods are related to the duration of
sunlight. Growth of plants and flowering are
dependent on sunlight. As we all know, plants
manufacture their food in sunlight by the
process of photosynthesis. There are some
crops, which are grown in rainy season, called
Q
IMPROVEMENT IN FOOD RESOURCES 205
all be of the same variety and germinate under
the same conditions.
Cultivation practices and crop yield are
related to weather, soil quality and availability
of water. Since weather conditions such as
drought and flood situations are
unpredictable, varieties that can be grown in
diverse climatic conditions are useful.
Similarly, varieties tolerant to high soil salinity
have been developed. Some of the factors for
which variety improvement is done are:
Higher yield: To increase the
productivity of the crop per acre.
Improved quality: Quality
considerations of crop products vary
from crop to crop. Baking quality is
important in wheat, protein quality in
pulses, oil quality in oilseeds and
preserving quality in fruits and
vegetables.
Biotic and abiotic resistance: Crops
production can go down due to biotic
(diseases, insects and nematodes) and
abiotic (drought, salinity, water
logging, heat, cold and frost) stresses
under different situations. Varieties
resistant to these stresses can improve
crop production.
Change in maturity duration: The
shorter the duration of the crop from
sowing to harvesting, the more
economical is the variety. Such short
durations allow farmers to grow
multiple rounds of crops in a year.
Short duration also reduces the cost
of crop production. Uniform maturity
makes the harvesting process easy
and reduces losses during harvesting.
Wider adaptability: Developing
varieties for wider adaptability will
help in stabilising the crop production
under dif ferent environmental
conditions. One variety can then be
grown under dif ferent climatic
conditions in different areas.
Desirable agronomic characteristics:
Tallness and profuse branching are
desirable characters for fodder crops.
Dwarfness is desired in cereals, so
that less nutrients are consumed by
these crops. Thus developing varieties
of desired agronomic characters help
give higher productivity.
uestions
1. How do biotic and abiotic factors
affect crop production?
2. What are the desirable agronomic
characteristics for crop
improvements?
15.1.2 CROP PRODUCTION MANAGEMENT
In India, as in many other agriculture-based
countries, farming ranges from small to very
large farms. Different farmers thus have more
or less land, money and access to information
and technologies. In short, it is the money or
financial conditions that allow farmers to take
up dif ferent farming practices and
agricultural technologies. There is a
correlation between higher inputs and yields.
Thus, the farmers purchasing capacity for
inputs decides cropping system and
production practices. Therefore, production
practices can be at different levels. They
include no cost production, low cost
production and high cost production
practices.
15.1.2 (i) NUTRIENT MANAGEMENT
Just as we need food for development, growth
and well-being, plants also require nutrients
for growth. Nutrients are supplied to plants
by air, water and soil. There are sixteen
nutrients which are essential for plants. Air
supplies carbon and oxygen, hydrogen comes
from water, and soil supplies the other
thirteen nutrients to plants. Amongst these
thirteen nutrients, six are required in large
quantities and are therefore called macro-
nutrients. The other seven nutrients are used
by plants in small quantities and are therefore
called micro-nutrients (Table 15.1).
Q
SCIENCE 206
our environment from excessive use of
fertilizers. Using biological waste material is
also a way of recycling farm waste. Based on
the kind of biological material used, manure
can be classified as:
(i) Compost and vermi-compost: The
process in which farm waste material
like livestock excreta (cow dung etc.),
vegetable waste, animal refuse,
domestic waste, sewage waste, straw,
eradicated weeds etc. is decomposed
in pits is known as composting. The
compost is rich in organic matter and
nutrients. Compost is also prepared
by using earthworms to hasten the
process of decomposition of plant and
animal refuse. This is called vermi-
compost.
(ii) Green manure: Prior to the sowing of
the crop seeds, some plants like sun
hemp or guar are grown and then
mulched by ploughing them into the
soil. These green plants thus turn into
green manure which helps in
enriching the soil in nitrogen and
phosphorus.
FERTILIZERS
Fertilizers are commercially produced plant
nutrients. Fertilizers supply nitrogen,
phosphorus and potassium. They are used
to ensure good vegetative growth (leaves,
branches and flowers), giving rise to healthy
plants. Fertilizers are a factor in the higher
yields of high-cost farming.
Fertilizers should be applied carefully in
terms of proper dose, time, and observing pre-
and post-application precautions for their
complete utilisation. For example, sometimes
fertilizers get washed away due to excessive
irrigation and are not fully absorbed by the
plants. This excess fertilizer then leads to
water pollution.
Also, as we have seen in the previous
chapter, continuous use of fertilizers in an
area can destroy soil fertility because the
organic matter in the soil is not replenished
and micro-organisms in the soil are harmed
by the fertilizers used. Short-term benefits of
using fertilizers and long-term benefits of
Deficiency of these nutrients affects
physiological processes in plants including
reproduction, growth and susceptibility to
diseases. To increase the yield, the soil can
be enriched by supplying these nutrients in
the form of manure and fertilizers.
uestions
1. What are macro-nutrients and
why are they called macro-
nutrients?
2. How do plants get nutrients?
MANURE
Manure contains large quantities of organic
matter and also supplies small quantities of
nutrients to the soil. Manure is prepared by
the decomposition of animal excreta and plant
waste. Manure helps in enriching soil with
nutrients and organic matter and increasing
soil fertility. The bulk of organic matter in
manure helps in improving the soil structure.
This involves increasing the water holding
capacity in sandy soils. In clayey soils, the
large quantities of organic matter help in
drainage and in avoiding water logging.
In using manure we use biological waste
material, which is advantageous in protecting
Table 15.1: Nutrients supplied
by air, water and soil
Source Nutrients
Air carbon, oxygen
Water hydrogen, oxygen
Soil (i) Macronutrients:
nitrogen, phosphorus,
potassium, calcium,
magnesium, sulphur
(ii) Micronutrients:
iron, manganese, boron,
zinc, copper,
molybdenum, chlorine
Q
India has a wide variety of water resources
and a highly varied climate. Under such
conditions, several different kinds of irrigation
systems are adopted to supply water to
agricultural lands depending on the kinds of
water resources available. These include
wells, canals, rivers and tanks.
Wells: There are two types of wells,
namely dug wells and tube wells. In a
dug well, water is collected from water
bearing strata. Tube wells can tap
water from the deeper strata. From
these wells, water is lifted by pumps
for irrigation.
Canals: This is usually an elaborate
and extensive irrigation system. In this
system canals receive water from one
or more reservoirs or from rivers. The
main canal is divided into branch
canals having further distributaries to
irrigate fields.
River Lift Systems: In areas where
canal flow is insufficient or irregular
due to inadequate reservoir release,
the lift system is more rational. Water
is directly drawn from the rivers for
supplementing irrigation in areas
close to rivers.
Tanks: These are small storage
reservoirs, which intercept and store
the run-off of smaller catchment
areas.
Fresh initiatives for increasing the water
available for agriculture include rainwater
harvesting and watershed management. This
involves building small check-dams which
lead to an increase in ground water levels.
The check-dams stop the rainwater from
flowing away and also reduce soil erosion.
15.1.2 (iii) CROPPING PATTERNS
Different ways of growing crops can be used
to give maximum benefit.
Mixed cropping is growing two or more
crops simultaneously on the same piece of
land, for example, wheat + gram, or wheat +
mustard, or groundnut + sunflower. This
reduces risk and gives some insurance
against failure of one of the crops.
using manure for maintaining soil fertility have
to be considered while aiming for optimum
yields in crop production.
uestion
1. Compare the use of manure and
fertilizers in maintaining soil
fertility.
Organic farming is a farming system with
minimal or no use of chemicals as fertilizers,
herbicides, pesticides etc. and with a
maximum input of organic manures, recycled
farm-wastes (straw and livestock excreta), use
of bio-agents such as culture of blue green
algae in preparation of biofertilizers, neem
leaves or turmeric specifically in grain storage
as bio-pesticides, with healthy cropping
systems [mixed cropping, inter-cropping and
crop rotation as discussed below in
15.1.2.(iii)]. These cropping systems are
beneficial in insect, pest and wheat control
besides providing nutrients.
15.1.2 (ii) IRRIGATION
Most agriculture in India is rain-fed, that is,
the success of crops in most areas is
dependent on timely monsoons and sufficient
rainfall spread through most of the growing
season. Hence, poor monsoons cause crop
failure. Ensuring that the crops get water at
the right stages during their growing season
can increase the expected yields of any crop.
Therefore, many measures are used to bring
more and more agricultural land under
irrigation.
Q
M
o
r
e

t
o

k
n
o
w
Droughts occur because of scarcity or
irregular distribution of rains. Drought
poses a threat to rain-fed farming
areas, where farmers do not use
irrigation for crop production and
depend only on rain. Light soils have
less water retention capacity. In areas
with light soils, crops get adversely
af fected by drought conditions.
Scientists have developed some crop
varieties which can tolerate drought
conditions.
SCIENCE 208
Inter-cropping is growing two or more
crops simultaneously on the same field in a
definite pattern (Fig.15.2). A few rows of one
crop alternate with a few rows of a second
crop, for example, soyabean + maize, or finger
millet (bajra) + cowpea (lobia). The crops are
selected such that their nutrient
requirements are different. This ensures
maximum utilisation of the nutrients
supplied, and also prevents pests and
diseases from spreading to all the plants
belonging to one crop in a field. This way,
both crops can give better returns.
(gokhroo), Parthenium (gajar ghas),
Cyperinus rotundus (motha). They compete
for food, space and light. Weeds take up
nutrients and reduce the growth of the crop.
Therefore, removal of weeds from cultivated
fields during the early stages of crop growth is
essential for a good harvest.
Generally insect pests attack the plants
in three ways: (i) they cut the root, stem and
leaf, (ii) they suck the cell sap from various
parts of the plant, and (iii) they bore into stem
and fruits. They thus affect the health of the
crop and reduce yields.
Diseases in plants are caused by
pathogens such as bacteria, fungi and viruses.
These pathogens can be present in and
transmitted through the soil, water and air.
Weeds, insects and diseases can be
controlled by various methods. One of the
most commonly used methods is the use of
pesticides, which include herbicides,
insecticides and fungicides. These chemicals
are sprayed on crop plants or used for treating
seeds and soil. However, excessive use of
these chemicals creates problems, since they
can be poisonous to many plant and animal
species and cause environmental pollution.
Weed control methods also include
mechanical removal. Preventive methods
such as proper seed bed preparation, timely
sowing of crops, intercropping and crop
rotation also help in weed control. Some other
preventive measures against pests are the use
of resistant varieties, and summer ploughing,
in which fields are ploughed deep in summers
to destroy weeds and pests.
uestion
1. Which of the following conditions
will give the most benefits? Why?
(a) Farmers use high-quality
seeds, do not adopt
irrigation or use fertilizers.
(b) Farmers use ordinary
seeds, adopt irrigation and
use fertilizer.
(c) Farmers use quality seeds,
adopt irrigation, use
fertilizer and use crop
protection measures.
Q
Fig. 15.2 : Intercropping
The growing of different crops on a piece
of land in a pre-planned succession is known
as crop rotation. Depending upon the
duration, crop rotation is done for different
crop combinations. The availability of
moisture and irrigation facilities decide the
choice of the crop to be cultivated after one
harvest. If crop rotation is done properly then
two or three crops can be grown in a year
with good harvests.
15.1.3 CROP PROTECTION MANAGEMENT
Field crops are infested by a large number of
weeds, insect pests and diseases. If weeds and
pests are not controlled at the appropriate
time then they can damage the crops so much
that most of the crop is lost.
Weeds are unwanted plants in the
cultivated field, for example, Xanthium
Activity _____________15.1
Visit a weed-infested field in the month
of July or August and make a list of
the weeds and insect pests in the field.
STORAGE OF GRAINS
Storage losses in agricultural produce can be
very high. Factors responsible for such losses
are biotic insects, rodents, fungi, mites and
bacteria, and abiotic inappropriate
moisture and temperatures in the place of
storage. These factors cause degradation in
quality, loss in weight, poor germinability,
discolouration of produce, all leading to poor
marketability. These factors can be controlled
by proper treatment and by systematic
management of warehouses.
Preventive and control measures are used
before grains are stored for future use. They
include strict cleaning of the produce before
storage, proper drying of the produce first in
sunlight and then in shade, and fumigation
using chemicals that can kill pests.
uestions
1. Why should preventive measures
and biological control methods be
preferred for protecting crops?
2. What factors may be responsible
for losses of grains during
storage?
Activity _____________15.2
Make a herbarium of cereals, pulses
and oil seeds and identify the seasons
of their sowing and harvesting.
15.2 Animal Husbandry
Animal husbandry is the scientific
management of animal livestock. It includes
various aspects such as feeding, breeding and
disease control. Animal-based farming
includes cattle, goat, sheep, poultry and fish
farming. As the population increases and as
living standards increase, the demand for
milk, eggs and meat is also going up. Also,
the growing awareness of the need for
humane treatment of livestock has brought
in new limitations in livestock farming. Thus,
livestock production also needs to be
improved.
15.2.1 CATTLE FARMING
Cattle husbandry is done for two purposes
milk and draught labour for agricultural work
such as tilling, irrigation and carting. Indian
cattle belong to two different species, Bos
indicus, cows, and Bos bubalis, buffaloes.
Milk-producing females are called milch
animals (dairy animals), while the ones used
for farm labour are called draught animals.
Milk production depends, to some extent,
on the duration of the lactation period,
meaning the period of milk production after
Q
Table 15.2: Nutritional values of animal products
Animal
Products
Fat Protein Sugar Minerals Water Vitamins
Milk (Cow) 3.60 4.00 4.50 0.70 87.20 B1, B2, B12, D, E
Egg 12.00 13.00 * 1.00 74.00 B2, D
Meat 3.60 21.10 * 1.10 74.20 B2, B12
Fish 2.50 19.00 * 1.30 77.20 Niacin, D, A
*Present in very small amounts
Per cent (%) Nutrients
SCIENCE 210
the birth of a calf. So, milk production can be
increased by increasing the lactation period.
Exotic or foreign breeds (for example, Jersey,
Brown Swiss) are selected for long lactation
periods, while local breeds (for example, Red
Sindhi, Sahiwal) show excellent resistance to
diseases. The two can be cross-bred to get
animals with both the desired qualities.
uestion
1. Which method is commonly used
for improving cattle breeds and
why?
Activity _____________15.3
Visit a livestock farm. Note the
following:
(1) Number of cattle and number of
different breeds.
(2) The amount of daily milk production
from the different breeds.
Proper cleaning and shelter facilities for
cows and buffaloes are required for humane
farming, for the health of the animals and
for production of clean milk as well. Animals
require regular brushing to remove dirt and
loose hair. They should be sheltered under
well-ventilated roofed sheds that protect them
from rain, heat and cold. The floor of the cattle
shed needs to be sloping so as to stay dry
and to facilitate cleaning.
The food requirements of dairy animals
are of two types: (a) maintenance
requirement, which is the food required to
support the animal to live a healthy life, and
(b) milk producing requirement, which is the
type of food required during the lactation
period. Animal feed includes: (a) roughage,
which is largely fibre, and (b) concentrates,
which are low in fibre and contain relatively
high levels of proteins and other nutrients.
Cattle need balanced rations containing all
nutrients in proportionate amounts. Besides
such nutritious food material, certain feed
additives containing micronutrients promote
the health and milk output of dairy animals.
Cattle suffer from a number of diseases.
The diseases, besides causing death, reduce
milk production. A healthy animal feeds
regularly and has a normal posture. The
parasites of cattle may be both external
parasites and internal parasites. The external
parasites live on the skin and mainly cause
skin diseases. The internal parasites like
worms, affect stomach and intestine while
flukes damage the liver. Infectious diseases
are also caused by bacteria and viruses.
Vaccinations are given to farm animals
against many major viral and bacterial
diseases.
15.2.2 POULTRY FARMING
Poultry farming is undertaken to raise
domestic fowl for egg production and chicken
meat. Therefore, improved poultry breeds are
developed and farmed to produce layers for
eggs and broilers for meat.
The cross-breeding programmes between
Indian (indigenous, for example, Aseel) and
foreign (exotic, for example, Leghorn) breeds
for variety improvement are focused on to
develop new varieties for the following
desirable traits
(i) number and quality of chicks;
Q
Fig. 15.3: Indigenous milch breed of cattle
(ii) dwarf broiler parent for commercial
chick production;
(iii) summer adaptation capacity/
tolerance to high temperature;
(iv) low maintenance requirements;
(v) reduction in the size of the egg-laying
bird with ability to utilise more
fibrous cheaper diets formulated
using agricultural by-products.
The ration (daily food requirement) for broilers
is protein rich with adequate fat. The level of
vitamins A and K is kept high in the poultry
feeds.
Poultry fowl suffer from a number of
diseases caused by virus, bacteria, fungi,
parasites, as well as from nutritional
deficiencies. These necessitate proper
cleaning, sanitation, and spraying of
disinfectants at regular intervals. Appropriate
vaccination can prevent the occurrence of
infectious diseases and reduce loss of poultry
during an outbreak of disease.
uestions
1. What management practices are
common in dairy and poultry
farming?
broilers and layers and in their
management?
Activity _____________15.4
Visit a local poultry farm. Observe types
of breeds and note the type of ration,
housing and lighting facilities given to
them. Identify the growers, layers and
broilers.
15.2.3 FISH PRODUCTION
Fish is a cheap source of animal protein for
our food. Fish production includes the finned
true fish as well as shellfish such as prawns
and molluscs. There are two ways of obtaining
fish. One is from natural resources, which is
called capture fishing. The other way is by
fish farming, which is called culture fishery.
The water source of the fish can be either
seawater or fresh water, such as in rivers and
ponds. Fishing can thus be done both by
capture and culture of fish in marine and
freshwater ecosystems.
15.2.3 (i) MARINE FISHERIES
Indias marine fishery resources include
7500 km of coastline and the deep seas
Fig. 15.4
Aseel Leghorn
uestion
1. Discuss the implications of the
following statement:
It is interesting to note that
poultry is Indias most efficient
converter of low fibre food stuff
(which is unfit for human
consumption) into highly
nutritious animal protein food.
EGG AND BROILER PRODUCTION
Broiler chickens are fed with vitamin-rich
supplementary feed for good growth rate and
better feed efficiency. Care is taken to avoid
mortality and to maintain feathering and
carcass quality. They are produced as broilers
and sent to market for meat purposes.
For good production of poultry birds, good
management practices are important. These
include maintenance of temperature and
hygienic conditions in housing and poultry
feed, as well as prevention and control of
diseases and pests.
The housing, nutritional and
environmental requirements of broilers are
somewhat different from those of egg layers.
Q
Q
SCIENCE 212
beyond it. Popular marine fish varieties
include pomphret, mackerel, tuna, sardines,
and Bombay duck. Marine fish are caught
using many kinds of fishing nets from fishing
boats. Yields are increased by locating large
schools of fish in the open sea using satellites
and echo-sounders.
Some marine fish of high economic value
are also farmed in seawater. This includes
finned fishes like mullets, bhetki, and pearl
spots, shellfish such as prawns (Fig. 15.5),
mussels and oysters as well as seaweed.
Oysters are also cultivated for the pearls
they make.
Macrobrachium rosenbergii
(fresh water)
Peneaus monodon
(marine)
Fig. 15.5 : Fresh water and marine prawns
As marine fish stocks get further depleted,
the demand for more fish can only be met by
such culture fisheries, a practice called
mariculture.
15.2.3 (ii) INLAND FISHERIES
Fresh water resources include canals, ponds,
reservoirs and rivers. Brackish water
resources, where seawater and fresh water
mix together, such as estuaries and lagoons
are also important fish reservoirs. While
capture fishing is also done in such inland
water bodies, the yield is not high. Most fish
production from these resources is through
aquaculture.
Fish culture is sometimes done in
combination with a rice crop, so that fish are
grown in the water in the paddy field. More
intensive fish farming can be done in
composite fish culture systems. Both local
and imported fish species are used in such
systems.
In such a system, a combination of five or
six fish species is used in a single fishpond.
These species are selected so that they do
not compete for food among them having
different types of food habits. As a result, the
food available in all the parts of the pond is
used. As Catlas are surface feeders, Rohus
feed in the middle-zone of the pond, Mrigals
and Common Carps are bottom feeders, and
Grass Carps feed on the weeds, together these
species (Fig. 15.6) can use all the food in the
pond without competing with each other. This
increases the fish yield from the pond.
(a)
(b)
(c)
(d)
Fig. 15.6: (a) Catla (b) Silver carp (c) Rohu (d) Grass
Carp (e) Mrigal (f) Common Carp
(e)
(f)
One problem with such composite fish
culture is that many of these fish breed only
during monsoon. Even if fish seed is collected
from the wild, it can be mixed with that of
other species as well. So, a major problem in
fish farming is the lack of availability of good-
quality seed. To overcome this problem, ways
have now been worked out to breed these fish
in ponds using hormonal stimulation. This
has ensured the supply of pure fish seed in
desired quantities.
uestions
1. How are fish obtained?
2. What are the advantages of
composite fish culture?
Activity _____________15.5
Visit a fish farm in fish breeding
season and note the following:
(1) Varieties of fish in the ponds
(2) Types of ponds
(3) Feed ingredients being used in
the farm
(4) Find out what the production
capacity of the farm is
15.2.4 BEE-KEEPING
Honey is widely used and therefore bee-
keeping for making honey has become an
agricultural enterprise. Since bee-keeping
needs low investments, farmers use it as an
additional income generating activity. In
addition to honey, the beehives are a source
of wax which is used in various medicinal
preparations.
The local varieties of bees used for
commercial honey production are Apis cerana
indica, commonly known as the Indian bee,
A. dorsata, the rock bee and A. florae, the
little bee. An Italian bee variety, A. mellifera,
has also been brought in to increase yield of
honey. This is the variety commonly used for
commercial honey production.
The Italian bees have high honey collection
capacity. They sting somewhat less. They stay
in a given beehive for long periods, and breed
very well. For commercial honey production,
bee farms or apiaries are established.
The value or quality of honey depends
upon the pasturage, or the flowers available
to the bees for nectar and pollen collection.
In addition to adequate quantity of pasturage,
the kind of flowers available will determine
the taste of the honey.
uestions
1. What are the desirable
characters of bee varieties
suitable for honey production?
2. What is pasturage and how is it
related to honey production?
Q
(a) (b)
Fig. 15.7: (a) Arrangement of beehive in an apiary
(b) honey extractor
Q
What
you have
learnt
There are thirteen nutrients essential for crops. Of these, six
are required in large quantities and are known as macro-
nutrients whereas seven nutrients are required in small
quantities and are known as micro-nutrients.
Manure and fertilizers are the main sources of nutrient supply
to crops.
SCIENCE 214
Organic farming is a farming system with minimal or no
use of chemicals as fertilizers, herbicides, pesticides etc.
and with a maximum input of organic manures, recyled
farm wastes, and bio-agents, with healthy cropping systems.
Mixed farming is a system of farming on a particular farm
which includes crop production, raising of livestock etc.
Mixed cropping is growing of two or more crops simultaneously
on the same piece of land.
Growing two or more crops in definite row patterns is known
as inter-cropping.
The growing of different crops on a piece of land in pre-planned
succession is called crop rotation.
Varietal improvement is required for higher yield, good quality,
biotic and abiotic resistance, shortening the maturity duration,
wider adaptability and desirable agronomic characteristics.
Farm animals require proper care and management such as
shelter, feeding, breeding and disease control. This is called
animal husbandry.
Poultry farming is done to raise domestic fowls. Poultry
production includes egg production and broiler production for
poultry meat.
To enhance poultry production, cross breeding is done between
Indian and exotic breeds for variety improvement.
Fish may be obtained from marine resources as well as inland
resources.
To increase production of fish, they can be cultured in marine
and inland ecosystems.
Marine fish capture is done by fishing nets guided by echo-
sounders and satellites.
Composite fish culture system is commonly used for fish
farming.
Bee-keeping is done to get honey and wax.
Exercises
1. Explain any one method of crop production which ensures
high yield.
2. Why are manure and fertilizers used in fields?
3. What are the advantages of inter-cropping and crop rotation?
4. What is genetic manipulation? How is it useful in agricultural
practices?
5. How do storage grain losses occur?
6. How do good animal husbandry practices benefit farmers?
7. What are the benefits of cattle farming?
8. For increasing production, what is common in poultry, fisheries
and bee-keeping?
9. How do you differentiate between capture fishing, mariculture
and aquaculture?
SCIENCE 216
Chapter 3
4. (a) MgCl
2
(b) CaO
(c) Cu (NO
3
)
2
(d) AlCl
3
(e) CaCO
3
5. (a) Calcium, oxygen
(b) Hydrogen, bromine
(c) Sodium, hydrogen, carbon and oxygen
(d) Potassium, sulphur and oxygen
6. (a) 26 g
(b) 256 g
(c) 124 g
(d) 36.5 g
(e) 63 g
7. (a) 14 g
(b) 108 g
(c) 1260 g
8. (a) 0.375 mole
(b) 1.11 mole
(c) 0.5 mole
9. (a) 3.2 g
(b) 9.0 g
10. 3.76 10
22
molecules
11. 6.022 10
20
ions
Chapter 4
10. 80.006
11.
16
8
=90% ,
18
8
= 10%
12. Valency = 1, Name of the element is lithium,
13. Mass number of X =12, Y=14, Relationship is Isotope.
14. (a) F (b) F (c) T (d) F
15. (a) (b) (c) (d)
16. (a) (b) (c) (d)
Answers
ANSWERS 217
17. (a) (b) (c) (d)
18. (a) (b) (c) (d)
19.
Atomic Mass Number Number Number Name of the
Number Number of of of Atomic
Neutrons Protons Electrons Species
9 19 10 9 9 Fluorine
16 32 16 16 16 Sulphur
12 24 12 12 12 Magnesium
01 2 01 1 01 Deuterium
01 1 0 1 0 Protium
Chapter 8
1. (a) distance = 2200 m; displacement = 200 m.
2. (a) average speed = average velocity = 2.00 m s
1
(b) average speed = 1.90 m s
1
; average velocity = 0.952 m s
1
3. average speed = 24 km h
1
4. distance travelled = 96 m
7. velocity = 20 m s
1
; time = 2 s
10. speed = 3.07 km s
1
Chapter 9
4. c
5. 14000 N
6. 4 N
7. (a) 35000 N
(b) 3.5 m s
-2
(c) 28000 N
8. 2550 N in a direction opposite to the motion of the vehicle
9. d
10. 200 N
11. 0 m s
-1
13. 3 kg m s
-1
14. 2.25 m; 50 N
15. 10 kg m s
-1
; 10 kg m s
-1
; 5/3 m s
-1
16. 500 kg m s
-1
; 800 kg m s
-1
; 50 N
18. 40 kg m s
-1
A2. 240 N
A3. 2500 N
A4. 5 m s
-2
; 2400 kg m s
-1
; 6000 N
ANSWERS 217
SCIENCE 218
Chapter 10
3. 9.8 N
12. Weight on earth is 98 N and on moon is 16.3 N.
13. Maximum height is 122.5 m and total time is 5 s + 5 s = 10 s.
14. 19.6 m/s
15. Maximum height = 80 m, Net displacement = 0, Total distance covered = 160 m.
16. Gravitational force = 53.36 10
32
N.
17. 4 s, 80 m from the top.
18. Initial velocity = 29.4 m s
1
, height = 44.1 m. After 4 s the ball will be at a distance of 4.9 m
from the top or 39.2 m from the bottom.
21. The substance will sink.
22. The packet will sink. The mass of water displaced is 350 g.
Chapter 11
2. Zero
4. 210 J
5. Zero
9. 9 10
8
J
10. 2000 J, 1000 J
11. Zero
14. 15 kWh (Unit)
17. 208333.3 J
18. (i) Zero
(ii) Positive
(iii) Negative
20. 20 kWh
Chapter 12
7. 17.2 m, 0.0172 m
8. 18.55
9. 6000
13. 11.47 s
14. 22,600 Hz
20. 1450 ms
-1

9th Class Science Com

Uploaded by

Copyright:

Available Formats

9th Class Science Com

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

9th Class Science Com

Uploaded by

Copyright:

Available Formats

Presents NCERT Text Books

NCERT Text Books: 9

). Ions may consist

m. It is due to this reason that

2000 Hz = 700 m/s

You might also like