IGS-500T

Compact Industrial 5-Port 10/100/1000T Gigabit

Ethernet Switch

Physical Port
Key Features
• 5-port 10/100/1000BASE-T RJ45 with auto-MDI/MDI-X
function

Layer 2 Features
• Complies with IEEE 802.3 10BASE-T, IEEE 802.3u
100BASE-TX, IEEE 802.3ab 1000BASE-T Ethernet
standard

• Supports auto-negotiation and 10/100Mbps half/full duplex

and 1000Mbps full duplex

• Prevents packet loss with back pressure (half-duplex) and

Compact Size for More Practicability and Convenience
IEEE 802.3x pause frame flow control (full-duplex)
PLANET IGS-500T Compact Industrial 5-Port 10/100/1000T Gigabit
• High-performance Store and Forward architecture,
Ethernet Switch, suitable for industrial use, features 5 1000Mbps auto-
negotiation ports, IP30-rated rugged but compact case and a wide-ranging broadcast storm control and runt/CRC filtering eliminate
redundant power system (12~48V DC or 24V AC). The IGS-500T is able to erroneous packets to optimize the network bandwidth
operate in any harsh environment with operating temperature ranging from -40
• Backplane (switching fabric): 10Gbps
to 75 degrees C.
• Integrated address look-up engine, supporting 4K absolute
MAC addresses

• 9K jumbo packet size

• Automatic address learning and address aging

• CSMA/CD Protocol

Industrial Case and Installation

• IP30 metal case

135mm • DIN rail and wall-mount design

• 12 to 48V DC, redundant power with polarity reverse

104mm protect function and connective, removable terminal block
for master and slave power; 24V AC power support

• Supports 6000 VDC Ethernet ESD protection

• -40 to 75 degrees C operating temperature

• Free fall, shock-proof and vibration-proof for industries

IGS-500T IGS-501T

Compact Industrial 5-Port Switch

Data Sheet

1 1
 IGS-500T

As the trend for an IIoT (Industrial Internet of Things) infrastructure is gradually in demand, the IGS-500T is especially designed to make the
deployment of an industrial network easy as it comes with a Plug and Play feature. Besides, it is stable and reliable when it comes to fast data and
power transmission.

Low Power Consumption for Green Networking

The IGS-500T, adopting the advanced green networking technology, provides the link-on cable length power saving and link-down power saving
methods. These features make the IGS-500T consume very low power in full load operation mode, which helps conserve energy effectively but
maintains high performance efficiently.

With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the IGS-500T can automatically detect cable link status
and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active.

Dual Power Input for High Availability Network System

The IGS-500T features a strong dual power input system with wide-ranging voltages (12V~48V DC or 24V AC) incorporated into customer’s
automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover
function will be activated automatically to keep powering the IGS-500T via power supply 2 alternatively without any loss of operation.

Non-stop Ethernet Server

Dual Power Input with Auto Failover
12V~48V DC 12V~48V DC

12V~48V DC 12V~48V DC

DC DC DC DC

Active Active Active

Power Power Power Power

1 2 1 2

Camera Camera

PC PC

DC Power Line (DC)

1000BASE-T UTP

High Switch Performance

The IGS-500T offers a high-performance switch architecture. With the 5 10/100/1000Mbps Gigabit Ethernet ports providing non-blocking switch fabric
and wire-speed throughput as high as 10Gbps and the 4K MAC address table, the IGS-500T can perform wire-speed packet transfer without the risk
of packet loss. The flow control function enables the IGS-500T to provide fast and reliable data transfer.

Plug and Play

All of the RJ45 copper interfaces in the IGS-500T support 10/100/1000Mbps auto negotiation for optimal speed detection through RJ45 Category 6,
5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-
through or crossover cables.

2
 IGS-500T

Application
Designed for Heavy Industries
The IGS-500T’s IP30-rated metal case is particularly designed for heavy industries, such as factories, harbors, warehouses, and more. When installed at
these establishments, it can enhance the work performance of these establishments by speedily transferring incoming and outgoing data.

IP Camera

Internet

Printer IGS-500T

|O|O|

Industrial Controller 1000BASE-T UTP

Serial over Ethernet
Converter PC |O|O| Serial Line (RS-XXX)

3
 IGS-500T

Specifications
Model IGS-500T
Hardware Specifications
Hardware Version 4
Copper Ports 5 x 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
Removable 6-pin terminal block
Connector
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2
Provides one relay output for power failure
Alarm
Alarm relay current carry ability: 1A@DC 24V
3 x LED for system and power:
■ Green: DC Power 1
■ Green: DC Power 2
LED ■ Red: Power Fault
2 x LED for each copper port
■ Green: 1000Mbps LNK/ACT
■ Orange:10/100Mbps LNK/ACT
ESD Protection 6KV
EFT Protection 6KV
Power Requirements 12~48V DC, redundant power with polarity reverse protection function, 24V AC power support
Power Consumption / Dissipation 3.6 watts/12.35BTU
Installation DIN-rail kit and wall-mount ear
Enclosure IP30 metal case
Dimensions (W x D x H) 70 x 104 x 30 mm
Weight 252g
Switch Specifications
Switch Processing Scheme Store-and-Forward
Address Table 4K entries
Buffer Memory 1M bits on-chip buffer memory
Back pressure for half duplex
Flow Control
IEEE 802.3x pause frame for full duplex
Switch Fabric 10Gbps
Throughput (packet per second) 7.4Mpps@64bytes
Jumbo Frame 9K
10/100/1000BASE-T
Network Cables Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters)
EIA/TIA-568 100-ohm STP (max. 100 meters)
Standards Conformance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
Standards Compliance
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
Regulatory Compliance FCC Part 15 Class A, CE
IEC 60068-2-32 (free fall)
Stability Testing IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Environment
Operating: -40~75 degrees C
Temperature
Storage: -40~75 degrees C
Humidity Operating: 5~90%, Storage: 5~90% (non-condensing)

4
 IGS-500T

Diagram
Top View

V1+ V1-
DC1

1A@24V V2+ V2-

Fault
DC2
DC12~48V, AC 24V
Input

Side View Front View Side View Rear View

P1 P2 FAULT

LNK ACT

52.00
1000
1

2
104.00

91.00
30.00

9.00
4

52.00
50.00

5
100

21.69
LNK ACT

IGS-500T
28.65
30.00

70.00

18.00
Bottom View

Dimensions ( unit = mm )

Ordering Information
IGS-501T 5-port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)

Related Products
IGS-501T 5-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)
IGS-801T 8-Port 10/100/1000T Industrial Gigabit Ethernet Switch (-40~75 degrees C operating temperature)
IGS-1020TF Industrial 8-Port 10/100/1000T + 2-Port 1000X SFP Ethernet Switch (-40~75 degrees C operating temperature)
ISW-800T Compact Industrial 8-Port 10/100TX Ethernet Switch (-40~75 degrees C operating temperature)
ISW-501T Industrial 5-Port 10/100TX Fast Ethernet Switch (-40~75 degrees C operating temperature)
ISW-801T Industrial 8-Port 10/100TX Fast Ethernet Switch (-40~75 degrees C operating temperature)

PLANET Technology Corporation

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City IGS-500T
231, Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved.
Email: [email protected] www.planet.com.tw
5