Scribd Logo
Upload

Welcome to Scribd!

  • 102 views

    04 - Camshaft Bearings - Install

    Uploaded by

    Nim
    Caterpillar Camshaft Bearings - Install guideline

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    04 - Camshaft Bearings - Install

    Uploaded by

    Nim
    102 views3 pages
    Caterpillar Camshaft Bearings - Install guideline

    Original Title

    04- Camshaft Bearings - Install

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Caterpillar Camshaft Bearings - Install guideline

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    102 views3 pages

    04 - Camshaft Bearings - Install

    Uploaded by

    Nim
    Caterpillar Camshaft Bearings - Install guideline

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    G3516 Engine Electronic Ignition System 4EK00001-UP(SEBP2185 - 78) - Documentation Page 1 of 3

    Shutdown SIS

    Previous Screen

    Product: GAS ENGINE


    Model: G3516 GAS ENGINE 4EK02191
    Configuration: G3516 Engine Electronic Ignition System 4EK00001-UP

    Disassembly and Assembly


    G3500 Engines
    Media Number -SENR6419-13 Publication Date -01/08/2013 Date Updated -08/08/2013

    i03867080

    Camshaft Bearings - Install


    SMCS - 1211-012

    Installation Procedure
    Table 1
    Required Tools
    Tool Part Number Part Description Qty
    6V-4077 Camshaft Bearing Tool Group 1
    125-2739 (1)
    Bearing Pilot 1
    A
    125-2740 (1)
    Back Up Plate 1
    125-2741 (1)
    Bearing Sleeve 1
    B 8S-2241 Camshaft Bearing Tool Group 1
    C 5P-5247 Hydraulic Puller 1
    D 8H-0684 Ratchet Wrench 1
    (1)
    Alternate Tooling for camshaft bearings with a large diameter

    NOTICE

    Keep all parts clean from contaminants.

    Contaminants may cause rapid wear and shortened component life.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 12/3/2016
    G3516 Engine Electronic Ignition System 4EK00001-UP(SEBP2185 - 78) - Documentation Page 2 of 3

    Illustration 1 g00578338

    Typical example

    1. Install camshaft bearing (1) on Tooling (A) .

    Note: Tooling (B) can be used to install the camshaft bearings when the flywheel housing and
    the front housing have been removed.

    Illustration 2 g02108639

    Rear View

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 12/3/2016
    G3516 Engine Electronic Ignition System 4EK00001-UP(SEBP2185 - 78) - Documentation Page 3 of 3

    (X) Location of camshaft bearing joints

    (Y) Location of oil holes

    2. Position camshaft bearing (1) and Tooling (A) in the bore.

    Note: The camshaft bearing joint must be on the horizontal centerline of the bore. The upper oil
    hole must be 20 ± 5 degrees above the horizontal centerline of the bore. The lower oil hole of
    the camshaft bearing must be 20 ± 5 degrees below the horizontal centerline of the bore. The
    camshaft bearing joints must face the inside of the cylinder block.

    Illustration 3 g00578349

    3. Install Tooling (C) on Tooling (A) and pull the camshaft bearing into the bore.

    Note: Tooling (D) can be used in place of Tooling (C) .

    4. Check the bore of the camshaft bearing after installation. The bore must be 86.00 ± 0.06 mm
    (3.385 ± 0.002 inch).

    End By: Install the camshafts. Refer to Disassembly and Assembly, "Camshaft - Install".

    Copyright 1993 - 2016 Caterpillar Inc. Sat Dec 3 12:53:23 UTC+0330 2016
    All Rights Reserved.
    Private Network For SIS Licensees.

    https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 12/3/2016

    You might also like