Eaton's Variable Speed Drive Pump Solutions

Saving energy. Cutting costs. Reducing noise.

Energy efficient
Variable Speed Drive Pump solutions
 Save energy.
Cut costs.
Reduce noise.
Eaton Variable Speed Drive
Pump Solutions
With the costs of energy steadily rising,
energy consumption is playing a more
significant role than ever in the total cost of
machine operation. As a result, the hydraulics
industry is demanding energy efficient
solutions that also meet stringent government
regulations for environmental protection.

Proven value and benefits

• Up to 70% energy savings – Sustainability
and cost reduction
• Quieter operation – Improved safety and
regulation compliance
• Reduced or eliminated cooling needs –
Machine cost reduction
• Pump downsizing – Machine cost and
footprint savings
• Eaton standard products – Proven
reliability and availability

2 EATON Lorem Ipsum Dolor

Reduced energy cost and consumption Reduced heat generation
Eaton’s Variable Speed Drive and Pump Systems can help you cut With improved energy efficiency comes less heat production, so
energy usage by up to 70% depending on the machine duty cycle. these systems can often allow you to downsize or even eliminate oil
This can help significantly reduce operating costs, so your invest- coolers. Otherwise, they can help reduce the amount of hydraulic
ment can quickly pay for itself. oil you use and the size of your tanks, thereby extending the life of
The proven performance and power density of Eaton’s pump families seals and oil.
combined with the smart control of Eaton Variable Speed Drives Reduced pump size
enable these systems to achieve power-on-demand more efficiently Eaton’s Variable Speed Drive Pumps open the possibility of down-
than conventional constant-speed drive pump systems. Instead of sizing your pumps to cut costs. Because the system can run higher
operating constantly at 1500 RPM or 1800 RPM (depending on the than 1500 RPM or 1800 RPM, you can reduce the pump displace-
region), Eaton’s Variable Speed Drive Pumps can be controlled to ment requirement proportionally for the same amount of flow—
match the load requirements of the current duty cycle via intelligent shrinking the machine’s overall footprint.
control. As a result, you can eliminate energy waste.
Backed by experienced application engineering, service, training and
Reduced noise pollution sales support—as well as the power of one Eaton—Eaton’s proven
Noise reduction is another significant benefit of running your pump and variable speed drive products can be a powerful
pumps at variable speeds. The electric motor and pump speed vary combination to resolve challenges in today’s demanding market.
constantly in an Eaton Variable Speed Drive System to match the
duty cycle requirement. This results in remarkable noise reduction,
which helps protect operators’ hearing and meets more stringent
noise regulations.

Energy Consumption Comparison of Different Types of Pump Systems

Energy Consumption Comparison Energy Cost Comparison
100%
100%
90%
90%
80%
80%
70%
Power in %

70%
60%
60%
50%
50%
40%
40%
30%
30%
20%
20%
10%
10%
0%
Time (Machine Duty Cycle Example) 0%
Fixed Pump Variable Pump, Variable Pump, Variable Speed
Fixed Pump Variable Pump, Variable Pump, Variable Speed Load PC Control LS Control Drive Pump
PC Control LS Control Drive Pump

Pump and Drive Selection Guide

Nominal Min Max Hydraulic Hydraulic
Displacement Pressure speed speed Closed-loop Open-loop
Pump (cc/rev) (bar) (rpm) (rpm) motion control motion control
Machine Die Oil/Gas/ General
Plastics Press tool casting Marine Processing industrial
Piston
425 series 80 210 0 2200
PVM 18-141 up to 315 0 up to 2800
PF(V)X & PV(F)W 66-750 350 0 up to 1800
Vane
VMQ 10-240 290 200 up to 3000
V series 7-193 up to 210 200 1800
V10 & 20 3-42 up to 170 200 up to 3400
IMP
Integrated motor pump package Depending on pump choice
Drive
Standard performance VFD, DG1
High performance VFD, SPX9000
Note
1. For details see speed-pressure performance curve in catalog
2. Consult Eaton application engineering for details as needed

EATON Variable Speed Drive Pump Solutions E-PUIO-BB001-E April 2015 3

Closed-loop motion control mode Open-loop motion control mode

Variable frequency drive

Pressure Variable frequency drive
sensor
p
U
P or Q
Command
+ Speed
- sensor Q Command
U
n M
N-Actual (Alternate choice)

M
Feedback PM motor/Asynchronous
Signal (motor dependent) servo motor/
Inverter duty motor
P-Actual
(Alternate choice)
Inverter rated/duty
Induction Motor

Variable frequency drive -

Eaton PowerXL DG1 series

Variable frequency drive - SPX 9000 Series

(high performance with closed-loop motion Integrated PF(V)X & Integrated
control capability) Motor 425 PVM PF(V)W VMQ V Series V10 & V20 Motor Pump
425 PVM Pump

Eaton pumps Eaton drive: PowerXL DG1 series, standard performance

• 425 Dual-Displacement piston pump – 210 bar, 80cc, variable frequency drive
min speed 0 rpm, max 2200 rpm • Up to 90KW, 230V/480/575V
• PVM Variable piston pump – up to 315 bar, 18-141cc, • Built-in I/O - 8DI, 1DO; 2AI, 2AO; 2FC, 1FA relays
min speed 0 rpm, max up to 2800 rpm • Built-in communications - EtherNet/IP, Modbus TCP; Modbus RTU,
• PF(V)X & PF(V)W Hydrokraft Fixed and Variable piston pump – BACnet MS/TP
350 bar, 66-750cc, min speed 0 rpm, max 1800 rpm
• VMQ vane pump – up to 290 bar, 10-240cc, min speed 200 rpm, Eaton drive: SPX9000 series, high performance variable
max up to 3000 rpm frequency drive
• V series vane pump – up to 210 bar, 7-193cc, min speed 200 rpm, • Built-in I/O - 6 DI, 1 DO, 2 AI, 1AO, 2 RO (NC-NO)
max 1800 rpm
• Up to 1500KW, 230V/480V/575V
• V10&V20 vane pump – up to 170 bar, 3-42cc, min speed 200 rpm,
max up to 3400 rpm
• Optional communication protocols, such as Ethernet/IP,
Profibus DP, CANopen, etc.
Eaton integrated motor pump (IMP) package
PM motor / asynchronous servo motor / inverter
• Pump choices - VMQ, V series, PVM, PVQ duty motor
• Customer choice

Eaton Eaton Eaton

Hydraulics Group USA Hydraulics Group Europe Hydraulics Group Asia Pacific
14615 Lone Oak Road Route de la Longeraie 7 Eaton Building
Eden Prairie, MN 55344 1110 Morges No.7 Lane 280 Linhong Road
USA Switzerland Changning District,
Tel: 952-937-9800 Tel: +41 (0) 21 811 4600 Shanghai 200335
Fax: 952-294-7722 Fax: +41 (0) 21 811 4601 China
www.eaton.com/hydraulics Tel: (+86 21) 5200 0099
Fax: (+86 21) 2230 7240

© 2015 Eaton
All Rights Reserved
Document No. E-PUIO-BB001-E
April 2015