Adhesives Epoxy Cements 50-53

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

CHEMICALS

USEFUL CHEMICAL SPECIFICATION MATRIX


Adhesives Specifications

Chem
MEK = Methyl Ethyl Ketone
HMIS
Flammability Temp °F Curing/ Suggested Shelf Life
Part No. MSDS # Description Pkg. Contents Base Color Rating Drying Time Solvent Months* Dot Shipping
10-114 110 Quik Stik (2)-1/2 fl. oz. Bi
Bisphenol-A (Resin) Clear 1 -40 to 194°F 20-30 mins Acetone/ 12 UN3082
19-822 0.0105 oz. 30 cc. Mod. Epoxy MEK Hazard Class 9
10-100 106 Epoxy Pkg. (2), Bisphenol-A Clear/Amber 1 -40 to 302°F Hard 24 hrs MEK, Acetone 12 UN3082
Super Glue 3/4 fl.oz (Resin) or Chlorinated Hazard Class 9
Polyamide Blend Solvent
(Hardener)
10-347 133 Epoxy Glue Pkg. (2), 2 fl. oz Bisphenol-A Gray 1 -40 to 300°F Hard 24 hrs MEK, Acetone 36
UN3082
(Resin) or Organic Hazard Class 9
Polyamide Blend Solvent
(Hardener)
19-2092 117 Conductive 6 gram kit Silver Epoxy Silver 1 N/A 24-72 Hrs @77 F
N/A
12 UN3082
Epoxy 0.2116 oz filled 1 Hr. @ 140 F Hazard Class 9
19-348 124 Epoxy Putty 4 oz. 113.4 gm Epoxy Resin Gray 1 300°F 20 min. None 36 Not
Tube Regulated
19-115 215 GR-R-RIP .101 fl. oz Ethyl Clear 2 -76 to 185°F 15 to 60 secs. Acetone 12 Not
Cyanoacrylate Regulated
10-120 51 GC Super Glue .075 fl. oz Ethyl Clear 2 -65 to 180°F 15 to 60 secs. 10-312 or 12 Not
Cyanoacrylate lacquer thinner Regulated
10-4302-B 322 GC Bond 2 fl. oz Synthetic Tan 3 N/A 20 to 30 mins. MEK 12 ORM-D
Thermoplastic Resin
10-302 146 Service Cement 2 fl. oz Nitrocellulose Clear/ 3 N/A 20 to 30 mins. 10-312 or 36 ORM-D
10-310 1 gal. Lacquer Lt. Straw Lacquer Thinner

10-354 287 Rubber-to-Metal 2 fl. oz Phenolic Resin Black 3 N/A N/A Acetone 36 ORM-D
Cement II

10-4002 122 Acrylic Cement 2 fl. oz Acrylic Resin Clear 3 N/A 8 to 10 mins. MEK 36 ORM-D

10-5802 119 Vinyl Cement 2 fl. oz Vinyl Resin Clear 3 N/A 25 mins Acetone 36 ORM-D

Lubricants Specifications
HMIS
Flammability Specific Useful Temp. Shelf Life DOT
Part No. MSDS # Description Contents Base Color Rating Gravity Viscosity Range Months* Shipping
19-2302 147 White Lithium 1-3/4 fl. oz. Lithium Soap Off-White 1 0.924 6.6 CST at 100ºC -35ºC to +77ºC 36 ORM-D
Grease Grease (-30ºF to +170ºF)
10-1206 213 Luberex 2 fl. oz. Calcium Sterate Brown 1 0.910 290-325 at 100ºF -35ºC to +77ºC 36 Not
Grease (-30ºF to +170ºF) Regulated
10-2610 219 Tunerlub 1-3/4 fl. oz. Petrolatum Milky White 1 0.860 5x3 CP at 210ºF -35ºC to +77ºC 36 Not
(-30ºF to +170ºF) Regulated
10-1223 221 Phonolube 2 fl. oz. Mineral Oil Semi-Transparent 1 0.900 750 Sus at 38ºC -35ºC to +77ºC 24 Not
Tan (-30ºF to +170ºF) Regulated
19-826 280 Conductive 1 oz. Lithium Soap Grease Gray/Black 1 1.100 100 Sus at 100ºF -23ºC to +163ºC ∞** ORM-D
Grease Compound w/ Zinc & Graphite Filler (-10ºF to +325ºF)
19-821 216 Graphite Lubricant 1-1/8 oz. Powdered Graphite Dark Gray 0 2.250 Up to 400ºF 42 Not
Regulated
10-985 288 Reach-All Pen Oiler 1/2 fl. oz. Hydrocarbons Lt. Brown 1 0.930 115 SUS @ 100 F -25 to +150 F 36 Not
Regulated
19-601 302 Sili-Spray 4 oz. aerosol Hydrocarbon Clear Amber 3 0.750 -40ºC to +85ºC 24 ORM-D
Polysiloxane (-40ºF to +185ºF)
19-810 180 Dry TFE 4 oz. aerosol Hexane White Opaque 4 0.740 60 ORM-D

*Note: Shelf Life is determined by the Date Of Manufacture (DOM) located on the product. If a product has a shelf life of 12 months, a closed container is good for one
year past the DOM.

**No shelf life if stored above 32ºF.

For the latest information–www.gcelectronics.com 65


All quantities are single; BU’s are packages of 10 Unless otherwise noted.
CHEMICALS
CHEMICAL SPECIFICATION MATRIX (Cont.)
Potting Compound Specifications ^ 0 to 120ºF Application T
Chem

HMIS Temperature
Flammability Dielectric Curing/ Suggested Shelf Life
Part No. MSDS No. Description Contents Base Color Rating Strength Drying Time Solvent Months* DOT Shipping
19-823 GC Potting Epoxy 8 oz kit Bisphenol-A (Resin) Black 1 -40 to 300°F 24 Hrs @77 F None 12 Not
19-824 120 500 gram kit Polyimide Blend 410V/mil 1 Hr @ 150 F Regulated
19-824-2G 2 gal kit (Hardener) 10 min @225 F
19-160 276 GC Electronic Grade 10.2 Caulk Tube Organopolysiloxane
Potting Silicone
Clear 1 Open Cup
2 Closed Cup 452V/mil ^ 24 hrs @77ºF
Skin Over 40 min.
Xylol, Toluol,
Mineral Spirits
12 Not
Regulated
19-161 277 Thermally 8 oz kit Bisphenol-A Type Black 1 -40 to 300°F 24 to 72 hrs @77ºF None 12 Corrosive
Conductive Resin 400V/mil 3 Hr @ 149ºF, 30
Potting Epoxy min @ 212ºF

Solder Flux Specifications


HMIS
Flammability Suggested Solvent Shelf Life DOT
Part No. MSDS No. Description Contents Base Color Rating Months* Shipping
10-4202 112 Liquid Solder 2 fl. oz bottle Rosin & Clear to 3 Alcohol Dried 36 ORM-D
10-4216 Flux 16 fl. oz can Alcohol Lt. Straw Warm Water @ 125-150ºF
10-200 142 Solder Flux 2 fl. oz bottle Monoethanolomine Clear to 0 None 42 ORM-D
Drethandamine Lt. Yellow
10-1207 123 Soldering 2 fl. oz bottle Petrolatum Amber 0 None 36 Not
Paste Regulated
10-202 113 Water Soluble 2 fl. oz bottle Rosin Milky White 1 None 42 ORM-D

Flux Removers Specifications


HMIS
Flammability Specific Shelf Life DOT
Part No. MSDS No. Description Contents Base Color Rating Gravity Months* Shipping

19-229-A 313 Flux Remover and 16 fl oz can Trichloroethylene Clear 1 1.1 48 ORM-D
22-271-A Cleaner II 16 oz aerosol & Isopropanol

19-7522-A 310 Static-Free 18 oz aerosol Trichloroethylene Clear 1 1.34 42 ORM-D


High Strength & Isopropanol
Flux Remover

Solvents Specifications
HMIS
Flammability Used For Shelf Life DOT
Part No. MSDS No. Description Contents Base Color Rating Months* Shipping
10-4102 211 Q Dope Thinner 2 fl. oz. Toluene Clear 3 Polystyrene 42 ORM-D
10-312 102 Radio-TV Cement 2 fl. oz. Acetone Acetate Clear 4 Lacquer Type Cements 42 ORM-D
10-320 16 fl. oz.
10-321 1 gal. Flammable
Liquid
10-6702 226 Paint Thinner 2 fl. oz. Mineral Spirits Clear 3 Paint and Varnish Base 42 ORM-D
and Toluene
22-209 214 Print Kote Solvent 2 fl. oz. Toluene Clear 3 Silicone 42 ORM-D

Specialty Products Specifications


HMIS Temperature
Flammability Shelf Life DOT
Part No. MSDS No. Description Contents Base Color Rating Dielectric Strength Months* Shipping
10-8880 207 High Voltage 1 1/4 oz Silicone Rubber Clear 0 -65 to 250°F 36 Not
10-8882 Putty 8 oz Compounds 550V/mil Regulated
10-8602 118 Belt and Drive 2 fl. oz. bottle Alcohol Clear to 3 None 36 ORM-D
Non-Slip Lt. Brown
10-8101 206 Silicone 1 fl. oz. Silicone Clear Gel 0 -40 to 400°F 60 Not
10-8102 Compound 1 gal Grease 0.1" Gap, 600V/mil Regulated
10-568 1/3 oz. 615V/mil @ 10 mil

* Note:Shelf Life is determined by the Date Of Manufacture(DOM) located on the product. If a product has a shelf life of 12 months, a closed container is good for one year
past the DOM.

66 Phone (815)316-9080•Fax (815)316-9081


All quantities are single; BU’s are packages of 10 Unless otherwise noted.
CHEMICALS
ADHESIVES
Chem

GC Electronics offers three basic types of adhesives:


1. EPOXY CEMENTS: Among the strongest and most universal of all bonding materials. They consist of two parts which must be mixed
before applications. Epoxies dry without heat or pressure at room temperature through catalytic action.
2. CYANOACRYLATE ADHESIVES: Do not require the use of an added catalyst, nor heat or pressure. Dries within seconds through
the process of polymerization.
3. SOLVENT-RELEASE ADHESIVES: Resins or polymers in solution. This general category also includes welding type adhesives which
create a bond of exceptional strength.

EPOXY CEMENTS
Two-component, solventless cements which form an exceptionally strong bond (up to 4,000 psi) and they do not shrink on curing.
May be used to cement porous and non-porous substances including all metals, glass, ceramics, most plastics, cardboard, wood, rub-
ber, and fiber. They resist moisture, most solvents, acid, and alkalis. The consistency of epoxy is that of semi-fluid or putty. They have
a tendency to “fill-in” and will produce strong bonds even if the parts to be cemented do not match perfectly. Epoxy cures at room
temperature, but elevated temperatures (up to 80°C) may be employed to speed up the curing time. All GC epoxy cements are easy
to prepare as they require a 50/50 composition to be mixed. This can be judged when squeezing out the tube, for the exact ratio is
not critical. The working life, often called “pott life” of the mixture, is the time span from mixing the two parts until the chemical
reaction starts to harden the compound. A product with short working, and correspondingly short curing time, is indicated where a
single repair is to be made and the mixture can be applied immediately after preparation. For production purposes, a type with long
pott life should be selected.

Quik Stik Epoxy Putty


5 Minutes Set GC Epoxy Putty is a two part epoxy in a single
Clear, fast curing epoxy adhesive. In view of its tube. Amount needed is cut off and kneaded
short pott life, use is recommended when a together. Two minute work life. Dielectric strength:
single repair must be made and the mixed 400 volts/mil. Sets hard in 20 minutes, may be
adhesives can be used within one or two drilled and tapped. Max. useful temp. 300º F.
minutes. Cemented items can be safely Applications: Plumbing repairs, works under
handled within eight to twelve minutes, with water. Electrical, use in place of tape.
full hardness obtained after several hours. This
cement is relatively thin in consistency and
should be used to cement closely matching Part No. 19-348 4 oz. Tube
surfaces. The glue line is usually invisible.

Part No. 10-114 Pkg. of two 1/2 fl. oz. Tubes


Part No. 19-822 Double Syringe .0105 oz. Conductive Epoxy
Electrically conductive silver filled two
2 Part Epoxy Super Glue part for attaching electrical components.
5–6 Hour Set Mix ratio 1/1. Pot life 40 min. Cure 24
hours. Vol. res. .005 ohm-cm max.
Versatile epoxy cement particularly suit-
able for cementing non-porous materials. Part No. 19-2092 .2116 oz. Kit
Cures at room temperature. Bond strength
of over 3000 psi. Will not shrink through
curing. Resistant to water, solvents, heat,
cold and fungus. Excellent dielectric prop-
erties. Mix in equal parts from two tubes.
GC Potting Epoxy
Part No. 10-100 Pkg. of two 3/4 oz. Black opaque epoxy used for potting and
Tubes encapsulating electronic circuits. Use to
environmentally protect or conceal circuits.
2 Part Epoxy Glue This product is excellent when used with
5 Hours Set Chassis Boxes. Working Time (Pot life), 1
Hour, Mix ratio: 1 to 1, Temperature Range:
Provides an exceptionally hard and –40° to 300° F. by volume
strong bond. Good dielectric proper-
ties. Gray-white in color with fillers Electrical Properties:
added to increase viscosity and make it Volume Resistivity: 8.3 x 10 14 Ohm-cm
thixotropic (non-running). May be used Dielectric Constant: 3.5 (25˚C, 100 Hz)
to fill gaps or to replace broken sec- Dielectric Strength: 410 v/mil
tions. Bonds may be over-filled and
filed or sanded after curing. Part No. 19-823 8 oz. Kit (2-4 oz. Bottles)
Part No. 19-824 18 oz. Kit (2-9 oz. Bottles)
Part No. 10-347 Part No. 19-824-2G 2 gal. Kit (two 1 gal.
Pkg. of two 2 fl. oz. Tubes containers)
N.S.N. 8040-00-281-2308

50 Phone (815)316-9080•Fax (815)316-9081


All quantities are single; BU’s are packages of 10 Unless otherwise noted.
CHEMICALS EPOXY CEMENTS (Cont.)
GC Electronic Grade Self Leveling Thermally Conductive Potting

Chem
Potting Silicone Sealant Epoxy and Adhesive

Electronic Grade Self Leveling Silicone is a one-compo- This potting Epoxy and adhesive is a highly
nent, RTV (room temperature vulcanizing) product filled medium viscosity black casting resin
that uses new cross-linking mechanism as a cure formulated for application requiring a high
method. No acetic or other corrosive by-products degree of thermal conductivity. Mix
are generated during the curing process. It can ratio 1:1. It contains abrasive aluminum
be used in corrosion sensitive electrical or electronic oxide filler which can introduce wear
equipment with no adverse effect and cures at considerations. Cure is normally achieved at
room temperature. FDA Regulation number is 177.2600 Part A room temperature, although an elevated cure
schedule can be used to reach final
properties quickly.
Temperature Range -57 ºC to +204 ºC
(after cure): (-70˚F to + 400˚F)
Temperature Range: -40˚C to 150˚C
Dielectric Strength: 452 V/mil (173 KV/cm)
(40˚F to 300˚F)
Thermal Expansion 9 x 10 4 1/K Dielectric Strength: 430 V/mil
Coefficient: 0˚C to 100˚C (32˚F to 212˚F) Thermal Conductivity: 7.34 (Btu * in/ft 2 hr ˚F)
Volume Resistivity: >2.19 x 10 15 Ohm/cm Thermal Expansion
Coefficient: 44 (x 10 6 ˚C)
Part No. 19-160 10.2 fl. oz. Caulk Tube, Clear Part B Volume Resistivity: 2.14 x 10 12 Ohm/cm

meets the requirements of Part No. 19-161 two - 4 oz. Containers


MIL-46106 Type II

CYANOACRYLATE ADHESIVES & DEBONDERS


“Instant bonding” cyanoacrylate adhesives cure in seconds, do not depend on evaporation of solvents and require no clamping. They
are colorless and moisture resistant. They are ideal for bonding metals, plastics, rubber, glass and ceramics to each other or to dissimilar
materials. Bonding strength up to several thousand psi is possible making them among the strongest adhesives available. These adhesives
are economical, as only a drop is required. The best type should be determined by experimentation. Use them to repair broken plastic
cabinets and other plastic items, attaching nameplates and rubber feet to panels and chassis, cementing broken ceramic glass and rubber
items, repairing jewelry, etc. Porous surfaces may be bonded with Gelweld No. 19-0117. The average setting time is between 10 and 100
seconds, after which the cemented articles can be handled. These adhesives may even be used to bond surfaces which are normally difficult
to cement, such as teflon, polyethylene, vinyl, silicone rubber and glass.

GR-R-RIP GC Super Glue Regular Formula


World famous Ethyl Cyanoacrylate rapid Ethyl Cyanoacrylate Adhesive
bonding adhesive in gravity fed bottle.
Bond strength not affected by temperatures
from -60°C to 85°C (-76°F to 185°F). Medium viscosity formula for efficient wicking
action, faster curing time. Excellent for bonding
any combination of plastic, rubber or metal
Part No. 19-115 0.106 fl. oz. Bottle parts. This grade is ideal for small or fine work on
non-porous, smooth surfaces. It fills gaps of .003-
.005”. Highly resistant to acid, alkali, alkali
water, solvents and fungus. Non-toxic.
Meets Mil. spec. MIL-A-46050B Type 1 Class 2.

Part No. 10-120 0.075 fl. oz. Tube

For the latest information–www.gcelectronics.com 51


All quantities are single; BU’s are packages of 10 Unless otherwise noted.
SOLVENT RELEASE ADHESIVES
CHEMICALS
Chem

Most lacquer, rubber or plastic base adhesives are the solvent-release type. They are universal and easy to apply with no special prepara-
tion required. However, they are limited in their application as they are not suitable for cementing non-porous surfaces such as metals,
glass, glazed ceramics and others, due to the inability of the solvent to evaporate quickly, except around the edges. They do work very well
if one or both of the bonding surfaces consists of material which has some porosity.

General Purpose Plastic Cement II Rubber-to-Metal Cement II


A heavy-bodied, rubber-based cement with
A solvent-release adhesive with a special outstanding bonding qualities to many
Nitrocellulose Lacquer Base. The bond is materials such as natural and synthetic rubber,
hard, but not brittle. Adheres especially well metal, wood and plastics. Dries quickly and
to plastics, paper, leather, ceramics and produces a lasting, flexible bond which often
metal. Quick-drying and waterproof. Widely exceeds the strength of the material itself. Used
used by repairmen, model builders, to cement any rubber or flexible plastic part to
hobbyists and do-it-yourselfers. Ozone cabinets, chassis or panels; also for gaskets,
friendly. weather strips, etc. Ozone friendly.

Part No. 19-327 2 fl. oz. Bottle with Brush Part No. 10-354 2 fl. oz. Bottle with Brush
Replaces Part No. 10-324 Replaces Part No. 10-352

GC Bond Acrylic Cement


Thermoplastic adhesive based on synthetic Consists of solvent for acrylics (plexiglass,
components with unusually strong bonding lucite and others), slightly thickened with
characteristics to most materials. Produces a dissolved acrylic resin. It actually “welds’’
waterproof, resilient and long-lasting items made of plexiglass. The joint is
flexible bond. Light tan in color. GC Bond’s usually invisible and stronger than the
uses range from cementing paper and material itself. Cements many items used in
cardboard to cementing electronic electronics for decorative or functional
components to circuit boards and chassis. purposes as well as acrylic signs, art objects
Sticks well to all metals and glass. Dries in 15 and decorative pieces.
to 30 minutes.
Part No. 10-4002 2 fl. oz. Bottle with Brush
Part No. 10-4302-AB 2 fl. oz. Bottle with Brush Part No. 10-4008 8 fl. oz. Bottle with Brush
Part No. 10-4308-A 8 fl. oz. Bottle with Brush N.S.N. 8040-00-209-1346
N.S.N. 8040-00-259-6181
N.S.N. 8040-00-503-0315

Service Cement Vinylite Cement


A quick-drying and waterproof clear adhesive Vinyl resin-base cement that is waterproof,
which forms a strong, hard but vibration almost invisible and has excellent resistance
resistant bond with minimal shrinkage. A true to moisture, most acids and alkalis. Used to
universal adhesive for shop, industry, home cement items made of rigid or flexible vinyl,
and hobby use. Ideal for speaker repairs. May wood, cardboard, paper, metal, plastics,
also be used for gluing porous or semi-porous and glass. Very flexible. Lends itself
materials to each other or to metals, plastics, particularly well to items where a rigid
etc. Not suitable for metal-to-metal, glass-to- bond is not desirable.
metal or other non-porous to non-porous
surfaces, for which Perma-Bond, GR-R-RIP or Part No. 10-5802
epoxy cements are more suitable. 2 fl. oz. Bottle with Brush
N.S.N. 8030-00-264-3838
Part No. 10-302 2 fl. oz. Bottle with Brush
Part No. 10-310 1 gal. Plastic Jug
Part No. 10-310-4G 4 gal pack

52 Phone (815)316-9080•Fax (815)316-9081


All quantities are single; BU’s are packages of 10 Unless otherwise noted.
CHEMICALS ROOM TEMPERATURE VULCANIZING
Silicone Rubber Adhesive/Sealant

Chem
One-component elastomer cures to a tough, Silicone Caulk Tube
rubbery solid when exposed to moisture in the air. GC Industrial RTV Silicone is a one-part high modulus
Designed to fulfill industrial and electronic service Sealant/Adhesive and Gasketing material. Remains flexible
sealing and bonding requirements, this sealant has from -70°F to +400°F (-57°C to +204°C). Will not crack,
excellent adhesive strength, high elongation and crumble or dry out. Unaffected by ultra-violet, weather,
outstanding insulation and heat resistance qualities. most chemicals and solvents. Adheres to metal, wood,
Develops primerless adhesion to a variety of glass. fiberglass, ceramics, fabrics and many plastics. Meets
materials, including metal, glass, most wood, the following specifications: Agriculture Canada; USDA;
silicone resin, vulcanized silicone rubber, ceramic, FDA regulation No. 21 CFR 175.105; Mil Spec Mil-A-
natural and synthetic fibers; most plastics and 46106A-Type1 and US Fed. Specs. TT-S-001543A Class B
painted surfaces. Resists weathering, vibration and and TT-S-00230C Type 2, Class B.
exposure to oil, moisture, ozone, and temperatures
from sub-zero to 400°F. Cures to a tack-free surface Part No. EL-615 10.2 fl. oz. Caulk Tube, Clear
in 10 minutes. Full cure, 24 hours. Ideal for many
sealing, bonding and insulating applications,
including general electrical insulation, potting
exposed electronic components, bonding gaskets
for heating and refrigeration units, formed-in-place
gaskets for gear boxes, compressors, pumps and
outdoor motor covers, pressure sealing of aircraft
cabins and cockpits, caulking sheet metal stacks,
ductwork and equipment housings, and as an
anti-abrasion coating.
As Cured—Electrical
ASTM D 257 Volume Resistivity, ohm-cm – 6 X 1014
ASTM D 149 Dielectric Strength, volts/mil – 635
ASTM D 150 Dielectric Constant, at 60 Hz – 2.8 at 100 Hz – 2.8 at 100 kHz –2.8
ASTM D 150 Dissipation Factor, at 60 Hz – 0.0015 at 100 Hz – 0.0015 at 100
kHz – 0.0015
Silicone Quick Reference Guide
Silicone Rubber Sealant meets the following requirements: Description 10-150 19-155 19-157 19-158 19-159 EL-615
FDA: FDA regulation No. 21 CFR 175.105 when fully cured and washed. Non Corrosive - X - X X -
UL: Recognized for service to 302°F (150°C) where elongation is not necessary. High Temperature - - X - - -
Meets Mil. Spec. Mil-A-46106A Type 1, Extreme High Temp - - X - - -
Meets Fed. Spec. TT-S-001543A, Class B, TT-S-0230C, Type 2, Class B
Low Temperature X X X X X X
Extreme low temp X X X X X X
Thermal Conductivity - - - - - -
Part No. 10-150 3 fl. oz. Tube w/Dispensing Nozzle, Clear
High Strength X - X - - X
Super High Strength - X - X X -
High Voltage - X - X X -
Paste X X X X X X
Flowable - - - - - -
One Part X X X X X X
Primerless X X X X X X
Translucent X X - - -X X
R ed - - X - - -
White - - - X X -
Adhesive X X X X X X
Sealant X X X X X X
Potting - - - - - -
Encapsulating - - - - - -
Part No. 19-158
Part No. 19-155

Elect. Insulation X X X X X X
Part No. 19-159

Form In Place Gasket X X X X X X


Food Grade X X X X X X
Marine X - - - - X
Mil Spec X X X X X X

Electronic Grade Silicone


Sealant/Adhesive
One part non-corrosive, neutral cure electronic grade silicone
sealant. Will remain flexible from -70º F to +400º F. (-57º C
to +204º C) An excellent adhesive for many electrical and
electronic applications where corrosion to metals is a problem.
Good dielectric properties, high surface resistivity and resists
electrical tracking. Meets the requirements of Mil-A-46146A-
Type 1; meets the requirements of FDA status, FDA regulation
#177.2600
Part No. 19-155 3 fl. oz. Color: Clear
Part No. 19-158 10.2 fl. oz. Caulk Tube, Color: White
Part No. 19-159 2.8 fl. oz. Cartridge Color: White Clear

For the latest information–www.gcelectronics.com 53


All quantities are single; BU’s are packages of 10 Unless otherwise noted.
CHEMICALS CHEMICAL SPECIFICATION MATRIX (Cont.)
Silicone Sealants Specifications

Chem
HMIS
Specific Flammability Specific Tensile Dielectric Shelf Life Dot
Part No. MSDS Description Contents Base Color Rating Gravity Consistency Strength Strength Temperature Months* Shipping

10-150 149 Silicone Rubber 3 fl.oz Vulcanized Clear 1 1.03 Non-Slump 220 psi 500 v/mil -80°F to 400°F 18 Not
Adhesive/Sealant Silicone Paste Regulated
19-155 201 Electronic Grade 3 fl.oz Vulcanized Clear 0 1.04 Non-Slump 225-275 psi 18 KV/mm -70°F to 400°F 12 Not
Silicone Silicone Paste Regulated
Sealant/Adhesive
19-158 275 Electronic Grade 10.2 fl oz Vulcanized White 0 1.04 Non-Slump 225-275 psi 18 KV/mm -70°F to 400°F 12 Not
Silicone Silicone Paste Regulated
Sealant/Adhesive
19-159 2.8 fl oz -70°F to 400°F
EL-615 202 Silicone Caulk 10.2 fl oz Vulcanized Clear 1 1.03 Non-Slump 220 psi 25 KV/mm -70°F to 400°F 18 Not
Tube Silicone Paste Regulated

Printed Circuit Products Specifications


HMIS
Flammability Specific Shelf Life DOT
Part No. MSDS Description Contents Base Color Rating Gravity Months* Shipping
22-225-A 320 Positive Type 2 fl. Oz Sodium Milky White 0 1.08 42 UN 1824
22-226 208 Developer 6 fl. Oz Hydroxide ORM-D
Concentrate
22-237 306 PC Board 6 fl.oz Ferric Chloride Dark 0 1.42 42 UN 2582
22-238 Etching Solution 32 fl oz & Water § Brown ORM-D
22-239 1 gal.
22-240 104 Stripping 2 fl. Oz MEK & Clear 3 0.84 42 UN 1993
Solution Xylene ORM-D
22-244 131 Etch Resist 2 fl. Oz Hydrocarbon Black 3 0.92 36 UN 1263
Lacquer Solvent ORM-D
§ pH Level = 1.57

Coating Specifications
HMIS
Flammability Specific Drying Dielectric Useful Temp. Suggested Shelf Life DOT
Part No. MSDS Description Contents Base Color Rating Gravity Time Strength Range Solvent Months* Shipping
22-023 278 Silver Print II 1/2 troy oz. Acrylic Silver 3 1.76 Dry 20-30 min. Butyl Acetate 12 UN 1307
22-024 1 troy oz. Force Dry 30 min N/A N/A
ORM-D
@ 80ºC
10-9002 307 Red 2 fl. oz. Alkyd-Resin Red 3 1.100 8-24 hours Air Dry 40 – 55 sec. #3 Up to 93ºC Use Xylene 12 UN 1263
-A
10-9008 Insulation 8 fl. oz. Based Enamel @ 77°F EZ Zahn Cup @ 77ºF (200ºF) or 22-209 ORM-D
Varnish 3,000 v/Mil
22-203 138 Print Kote 2 fl. oz. High Polymer Clear 3 0.880 Air Dry 850 cp @ 25ºC -65ºC to 200ºC Use 18 UN 1993
Conformal Silicone Resin 15-30 mins. 1,400 v/Mil (-85ºF to 392ºF) 22-209 ORM-D
Coating
10-1762 135 Insulating 2 fl. oz. Synthetic Resin Black 3 0.930 4 hrs. 7,000 - 22,000 cps -30ºF to +200ºF Use Toluene 12 UN 1139
10-1766 Coating 16 fl. oz. in Solvent 1,400 v/Mil or 22-209 ORM-D
10-8665 159 Acrylic 11 oz. aerosol Polymeric Clear 4 0.740 10 mins 250 CP @ 25ºC Up to 190ºC Use Toluene 30 ORM-D

209 Corona Dope 2 fl. oz. 220 CP @ 25ºC 10-312 or Lacquer UN 1263
10-4702 Cellulose Black 3 0.900 30-60 mins. Up to 340ºF 36
3,800 v/Mil Thinner ORM-D
10-5002 137 Red-X 2 fl. oz. Thixotopic Red 3 1.120 2 hrs. 200-400 CP @ 25ºC Up to 105ºC Xylene 36 UN 1263
Corona Dope Polyester Enamel 2,000 v/Mil (220˚ F) ORM-D
10-3702 Q Dope 2 fl. oz. Styrene Milky 3 0.878 ± 0.040 80% Strength: Use 36 ORM-D
101 N/A
10-3704 4 fl. oz. White 72 Hr. 720 cps 10-4102
UN 1133
10-3709 1 gal.

*Note: Shelf Life is determined by the Date Of Manufacture (DOM) located on the product. If a product has a shelf life of 12 months, a closed container is good for one year
past the DOM.

For the latest information–www.gcelectronics.com


All quantities are single; BU’s are packages of 10 Unless otherwise noted. 67

You might also like