RR 6200

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Industrial Coating RR 6200

Desmophen ® A 160 / Desmodur® N 3390


Solventborne two-component top coat, white

Bead mill formulation % by wt.


Component 1 Desmophen A 160, 60 % in solvent naphtha 100 19.16
®
Tronox R-KB-4 (1) 27.81
®
Bentone 38, 10 % in
solvent naphtha 100 / Anti Terra U = 85 : 5 (2) (3) 1.85
®
Baysilone Paint additive OL 31, 10 % in xylene (4) 0.17
Methoxy propyl acetate / butyl acetate 1 : 1 5.81
54.80

Let down Mill base s. a. 54.80


Desmophen A 160, 60 % in solvent naphtha 100 25.20
Methoxy propyl acetate / butyl acetate 1 : 1 5.70
85.70

Component 2 Desmodur N 3390, 90% 9.04


Methoxy propyl acetate / butyl acetate 1 : 1 5.26
100.00

Composition Binder 34.76


Additive 0.30
Pigment 27.81
Solvent 37.13

Page 1 of 3
Edition 2006-06-07
CAS Coatings
Replaces edition of 2003-07-25 Starting formulation
Industrial Coating RR 6200

Characteristic data OH/NCO-ratio 1:1


Ratio Component 1 and 2 6:1
Binder/Pigment-ratio 1 : 0.8
Thinner methoxy propyl acetate / butyl acetate 1 : 1 approx. 4 %
Spray viscosity DIN cup 4 mm / 23 °C 25 s
Solid at spray viscosity approx. 60 %
VOC approx. 475 g/ltr.
VOC approx. 4 lbs/gal

Properties Potlife (Efflue time), DIN cup 4 mm / 23 °C 25 s


2h 28 s
4h 30 s
6h 30 s
8h 33 s

Gloss 20 °/60 ° (Steel) 89/96


Pendulum hardness (DIN ISO 1522) König
after 14 days (drying at room temperature) 136 s
after 14 days (forced drying) 188 s

Drying Dust free 1h


Tack free 2h
Forced drying 30 min 80 °C

Page 2 of 3
Edition 2006-06-07
CAS Coatings
Replaces edition of 2003-07-25 Starting formulation
Industrial Coating RR 6200

Suppliers (1) Tronox Pigments GmbH, Krefeld, Germany


(2) Elementis Specialties, Gent, Belgium
(3) Byk Chemie GmbH, Wesel, Germany
(4) Borchers GmbH, Langenfeld, Germany

The above formulation is intended solely as a guide for our business partners and others interested in our products. Further, although the
ingredients, quantities thereof and properties of compounds or finished goods mentioned herein reflect our recommendation at the time of
publication, this guide may not be subject to continuous review and/or updating, and you agree that use is undertaken at your sole risk. All
information is given without warranty or guarantee, and it is expressly understood and agreed that you assume, and hereby expressly
release us from, all liability, in tort, contract or otherwise, incurred in connection with the use of this guide.

Published by: Coatings, Adhesives & Sealants BU


Bayer MaterialScience AG
51368 Leverkusen, Germany
www.bayercoatings.com

Page 3 of 3
Edition 2006-06-07
CAS Coatings
Replaces edition of 2003-07-25 Starting formulation

You might also like