Process Control Manifolds PDF

Process Control Manifolds
© 2009 Parker Hannifin Corporation TTP 06/09
Process Control Manifolds

Parker Hannifin Ltd Parker Hannifin Corporation
Instrumentation Products Division Europe Instrumentation Products Division
Riverside Road 1005 A Cleaner Way
Pottington Business Park Huntsville
Barnstaple, Devon EX31 1NP AL 35805
England USA
Phone: +44 (0) 1271 313131 Phone: (256) 881-2040
Fax: +44 (0) 1271 373636 Fax: (256) 881-5072
www.parker.com/ipd www.parker.com/ipdus
WARNING USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users
having technical expertise.
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance, endurance,
maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the
information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is
responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hanniﬁn Corporation, its subsidiaries or its authorized distributors. Any Order accepted by Parker
Hanniﬁn will be subject to our terms and conditions of sale, copy available on request.
2 Parker Hannifin Corporation

Index
Overview
Overview
Flanged Double
Block & Bleed
Flanged Double Block &
Bleed Manifolds
Close Coupled Instrument
CCIMS
Mounting Solutions
Hand Valves
Hand Valves
Manifolds
2 Valve
2 Valve Manifolds
3 & 5 Valve
Manifolds
3 & 5 Valve Manifolds
Distribution
Distribution Manifolds &
Manifolds
Accessories
Enclosures Enclosures
Technical
Section
Technical Section
Instrumentation
Directory
Instrumentation Directory
Instrument Manifolds
Overview
Flanged Products,
Ball Valves and Hand
Valve Directory
Catalog 4190-PD
February 2007
Overview
Introduction The complete range of Manifold

From its ISO9001:2000 facility, Parker Hannifin's Instrumentation catalogues are available in a binder.
Products Division designs and manufactures one of the most Order Code ‘Manifold/Bin’
comprehensive ranges of precision instrumentation manifolds for
the varied oil, gas and process industries across the world.
With many years of manifold development Parker Hannifin offers

a range to suit all types of instrumentation installations,
specifications and applications.
In addition to manifolds, Parker Hannifin offer the broadest range

of tube fittings, instrumentation valves, complimentary products
and accessories in the market, providing all the components to
take the instrument engineer from the process connection to the
instrument.
This directory is intended as an overview to the range of

manifolds available. For detailed product specifications please
refer to the relevant product catalogue as indicated on the
following pages.
Key to Flow diagrams
Instrument
d
p
d
p
d
p
Example
With test ports With purge ports Remote Mount
Drain/bleed Drain/bleed
Test/Drain Process
Process Standard Option Option
Flow diagram A Flow diagram B Flow diagram C
See Flow
Cat4190-PM Diagram A
Test/drain Test/drain
Process Process
Test/ Process Test/ Process Drain Process
drain drain
Flow diagram D Flow diagram E Flow diagram F
6
H Series 2 Valve Manifolds
Overview
Designed for use with pressure measurement transmitters for up to 10,000psig, (689 barg)
Remote Mount Remote Mount Remote Remote Mount Remote Mount
See Flow See Flow See Flow See Flow See Flow
Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram A
Remote Mount Remote Mount High Pressure Double Block & Bleed High Pressure DBB
Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram F Cat4190-PM Diagram A
Direct Mount Direct Mount Direct Mount Direct Mount Direct Mount
Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram A Cat4190-PM Diagram A
Flanged Connected Flanged Connected Mini Static Pressure
For detailed product
information refer to
Cat 4190-PM
See Flow See Flow See Flow

Cat4190-PM Diagram A Cat4190-PM Diagram B Cat4190-PM Diagram A
2 Valve Carbon Steel Manifold Mounting Brackets

See Cat4190-PM
3051 Transmitter manifolds

Designed for mounting to the 3051 series of differential pressure transmitters
2 Valve 3051 3 Valve 3051 5 Valve 3051

Cat4190-PM Diagram A Cat4190-FM Diagram c Cat4190-FM Diagram D
7
Overview
Designed for use with pressure measurement transmitters for up to 10,000psig, (689 barg)
Direct Mount Direct Mount Direct Mount Direct Mount Cast Body
Cat4190-FM Diagram C Cat4190-FM Diagram C Cat4190-FM Diagram C Cat4190-FM Diagram C Cat4190-FM Diagram C
Cast Body Extruded body direct mount Extruded body direct mount Remote Mount Remote Mount
Cat4190-FM Diagram C Cat4190-FM Diagram C Cat4190-FM Diagram C Cat4190-FM Diagram C Cat4190-FM Diagram C
Designed for flow measurement transmitters (6000psig, 413 barg)
Direct Mount Direct Mount Direct Mount Custody Transfer/Fiscal metering Bottom Entry
Cat4190-FM Diagram D Cat4190-FM Diagram D Cat4190-FM Diagram D Cat4190-FM Diagram E Cat4190-FM Diagram D
Cast Body Cast Body Custody Transfer/Fiscal metering
Cat 4190-FM
See Flow See Flow See Flow See page 18

Cat4190-FM Diagram D Cat4190-FM Diagram D Cat4190-FM Diagram D/E Cat4190-FM
Custody Transfer/Fiscal metering Remote Mount High Pressure

Cat4190-FM Diagram D/E Cat4190-FM Diagram D/E Cat4190-FM Diagram D
3 & 5 Valve Carbon Steel Manifold Mounting Brackets See Cat4190-FM
8
Needle and Rising Plug Valves
Overview
Designed for use with any fluid up to 10,000 psig (689 barg)
Bar Stock Needle Bar Stock Needle Rising Plug

Cat 4190-HV
See See See

Cat4190-HV Cat4190-HV Cat4190-HV
Multi-port Gauge Single port Gauge Outside Screw & Yoke
See See See

Cat4190-HV Cat4190-HV Cat4190-HV
Miniature Needle
See
Cat4190-HV
Swivel Gauge Adaptors

Designed for use with any fluid up to 10,000 psig (689 barg) For flexible and secure positions of gauges
Distribution Manifold Distribution Manifold Swivel Gauge Adapter
See
Cat4190-PM
Miniature Manifolds
Are ideal for installation inside control panels and other size limited installations
Pressure Measurement Flow Measurement
See Flow See Flow

Cat4190-PM Diagram A Cat4190-FM Diagram F
9
Hi-Pro Ball Valve For detailed product
Overview
For high performance information refer to

process isolation
Cat 4190-HBV
Hi-Pro Ball Valve
See
Cat4190-HBV
PTFree connect™
The PTFree™ connect system enables users to assemble tube
2 Valve PTFree connect™ 3 Valve PTFree connect™
lines to any of the manifold ports without the need for PTFE
tape or other liquid sealants.
PTFree™ connection can be applied to any 2, 3 or 5 valve

manifold featured in this directory.
See See
Cat4190-PM Cat4190-FM
Double Block and Bleed Manifolds and Flanged Products

Designed to reduce leakage path by combining primary and secondary values into one compact unit.
Flange to compression Kidney flanges to For detailed product

Pro-Valve DBB manifolds
connectors compression connectors
Cat 4190-FP
See See See

Cat4190-FP Cat4190-FP Cat4190-FP
Pro-Bloc® DBB manifold Monoflange DBB manifolds
See See
Cat4190-FP Cat4190-FP
Manifold and Enclosure Sub-Assemblies

Enclosure Sub-Assembly Enclosure Sub-Assembly
Parker offer the world’s most complete range of
instrumentation products. They provide the basis for all Parker
sub-assemblies, allowing our engineers to capitalise on the
innovation, quality and reliability inherent in all our products. A
wide range of fully fitted enclosure assemblies are available.
10
Product Directory
Overview
Manifold and Hand Valve Options
Gland packing Graphite Bolting St. St. Mounting bolts SSB
PTFE M10 x 1.5 CS Mounting bolts CSB10
H. F. Fluorocarbon (RPV) M10 x 1.5 SS Mounting bolts SSB10
EPR (RPV) Bolts for 3051 inclusive flange CSBCP
Nitrile (RPV) Flow pattern Angled ANG
Silicone (RPV) Operating mechanism Lockable T bar HL
Seating PCTFE Anti tamper T bar AT
PEEK Anti tamper + key ATK
Stellite tip Handwheel HW
6mm Lockable handwheel LHW
Plug/Bleed valve Blank plug 1/2” NPT Mounting Panel mount PM
(supplied loose in box) Bleed valve 1/2” NPT Base mount BM
Plug & bleed valve 56mm centres 56
Connections Purge ports 1/4” 57mm centres 57
Test ports 1/4” Condition NACE (latest issue) NACE
Socket weld Oxygen use OXY
Butt weld Firesafe FS
in *mm Heat code certificates HCT
DIN 19213 Seal Test certificates TC
Swivel gauge outlet Air testing PT
Flange Check main catalogues for appropriate options
BSPT
BSPP
Bonnet Options
For key only - part no.

ATHKEY/1
Retro-fit kit part
number
KITAT without key
KITATK with key
Retro-fit kit part number Factory assembled suffix Retro-fit kit part number Retro-fit kit part number Retro-fit kit part number
KITTHL AT without key KITHW KITLHW KITPM
Factory assembled suffix ATK with key Factory assembled suffix Factory assembled suffix Factory assembled suffix
THL HW LHW PM
*Panel mounting hole diameter = 26mm (1.02”). Panel thickness = Max 5mm (0.20”) Min 2.3mm (0.09”).
Standard manifold globe style bonnet design

1. Positive handle retention design featuring For safe reliable and 3. Dust Cap
broached square engagement positioned by repeatable performance This has a dual purpose, preventing air born debris
thread locked grub screw. from contaminating the operating spindle thread and
providing colour coded functional identification.
2. "T" bar Isolate (BLUE) Bleed/test (RED).
Ergonomically designed for ease of operation.
Anti-tamper and lockable devices can be supplied 5. Gland adjuster lock nut
for on site retro-fit. A secure anti vibration locking mechanism to prevent
inadvertent gland adjuster loosening.
4. Gland packing adjuster
For maximum packing stability and performance, 7. Anti blowout spindle
simple and easily adjustable for gland wear Designed for low torque operation with high quality
compensation. micro mirror stem finish for positive gland sealing.
6. Valve Bonnet 9. Gland packing (adjustable)

Standard construction for maximum pressure Chevron style dual piece gland packing to provide
rating with replaceable bonnet sealing washer maximum sealing area contact with minimum gland
arrangement. adjustment.
8. Thrust Bush 11. Spindle tip

Anti rotational adjustor bush ensures uniform Self centering, non-rotational tip gives successive
packing compression, maximising pressure tight positive bubble tight shut off assuring the user of
sealing and limiting cold flow passages. leakage free performance and downstream functional
safety.
10. Bonnet/body washer
Annealed sealing washer to ensure complete Material
atmospheric leakage and allowing on site retro-fit Stainless steel std Carbon steel
of bonnets with 100% re-sealing assurance Monel 6Mo
Duplex Titanium
Super Duplex Incoloy 825
Hasteloy Inconel 625
Other material available on request
11
Double Block and
Bleed Flanged
Products with
Flanged Double
Block & Bleed
Fugitive Emission
options
Catalog 4190-FP
July 2007
Flanged Products
Introduction
Parker Hannifin’s response to the demand for reduction in leakage paths has been the combination of primary
Flanged Double
and secondary valves into one compact unit. The combining of piping and instrument valves into a single unit
Block & Bleed
has benefitted various markets. Products can be offered which meet class ‘A’ or class ‘B’ levels of ISO 15848
standard for fugitive emissions, as required.
Parker Hannifin can offer the unique combination of double block and bleed valve systems together with integral
fittings, both being designed and produced by one company. Selection of this combination results in the
elimination of taper thread connections and the need for thread sealant. For more information on leak path
reductions and how to combine connections and valves into one unit, please contact us.
Contents
Page 14 Introduction.
Page 15 Application illustrations.
Page 16 Ball valve specification.
Outside screw and yoke (O.S.&Y.)

Page 17
valve specification.
Page 18 Globe style needle valve specification.
Page 19 Bolted bonnet.
Page 20/23 Monoflange (MF) manifolds.
Page 24/30 Pro-Bloc® (PB) manifolds.
Page 31/32 Meeting the ISO Standard
Page 33/39 Fugitive Emission solutions

Flanged Products
Primary, secondary and vent valve applications and installations

Solutions
Flanged Double
Block & Bleed
Parker Hannifin offers the unique solution by incorporating primary and secondary valve systems into one
complete block. In addition traditional instrument taper thread connections can be totally eliminated resulting in
systems being free of thread sealant contamination.
Conventional Installation [1] Parker Monoflange [3]
• A welded flange, connected to a primary ANSI class • More compact than Pro-Bloc®, adding further space
isolating valve .The primary valve will be connected to and weight saving possibilities.
a secondary instrument valve. A pressure gauge or • Improved safety: leak paths reduced by up to 60%,
transmitter will then be installed downstream of the less susceptibility to vibration
instrument valve. • Reduced costs: installation and component costs
reduced by up to 80%
Parker Pro-Bloc ® [2] • Reduced weight: by up to 85%
• A one-piece integral forging incorporating up to 3 ball
See pages 23-28 for standard and fugitive Emission
valves or mixture of ball and needle design.
products.
• Improved safety: leak paths reduced by up to 60%
• Reduced costs: installation and component costs Parker Hi-Pro Manifolds [4]
reduced by up to 70% • Enables the user to continue to use traditional NPT
• Reduced weight: by up to 80% threaded connections and at the same time utilise
• Reduced susceptibility to problems caused by vibration. the double block and bleed principals Available in
See pages 29-38 for standard and fugitive Emission several combinations of ball and needle valves.
products. Full details can be found in CAT 4190 HBM.
Conventional [1]
Pro-Bloc ® [2] Hi-Pro [4]
Monoflange [3]
Typical heights
650mm
500mm
330mm
170mm
35 kgs 7 kgs 5 kgs 3 kgs
Typical weights
Design codes
• All Parker Hannifin Double block and bleed designs comply with the following codes.
• ANSI/ASME B16.34 (Designed to meet the pressure and temperature requirements)
• ANSI/ASME B1.20.1 (Threads)
• ANSI/ASME B16.5 (Dimensions)
• BS6755 PART 2/API 607 (Fire safe designed to meet the requirements and verified by internal testing)
• ISO 15848 for fugitive emissions.

Flanged Products
Ball valve specification

Flanged Double
Block & Bleed
Handle locking
Part description
Item Description
1 End Connector
Specifications
2 E-seal™
• 316 Stainless steel construction.
3 Sealing washer
• Maximum cold working pressure rating
4 Seats
6,000 psig (414 barg) with P.T.F.E. seats.*
5 Body
• Temperature rating PTFE seats
6 Ball Optional bolted end
-29˚C to +204˚C (-20˚F to +400˚F).*
7 Anti blowout stem connector
10,000 psig (689 barg) with PEEK seats.* 8 Thrust Seal
9 Gland packing
• Temperature rating PEEK seats
-29˚C to +232˚C (-20˚F to +450˚F).* 10 Upper gland packing
11 Thrust bush
*always refer to P/T graph
12 Stop pin
13 Thrust bush
Features 14 Lock nut
• Two piece body design - minimal leakage 15 Locking dome nut
paths.
16 Handle
• 4:1 Pressure boundary designed safety factor.
• Designed to comply with requirements of 17 Handle grip Spanner actuation
ANSI/ASME B16.34 where applicable.
• Bi-directional.
• PEEK and PTFE standard ball seat materials.
• PTFE and Graphoil gland packings.
• Bubble tight shutoff.
• Floating ball principal with dynamic response
seats featuring inherent self relief. Performance Data Pressure vs temperature
• Anti blowout stem.
* See catalogue 4190-HBV Hi-Pro Ball Valve for High Performance
• Integral compression ends available eliminating
taper threads and thread sealants. Process Isolation.
• Low torque operation.
• Quarter turn positive stop handle with
ergonomically designed protective sleeve.
• Full hydrostatic and low pressure air tested.
• Connector thread environmentally sealed.
• Anti static.
• Firesafe designed to meet BS6755 Part 2/ When selecting products for specific applications users should refer to
API 607, (optional). our notice at the bottom of page 2.

Flanged Products
Outside screw and yoke (O.S.&Y.) Features

needle valve • Externally adjustable gland.
• P.T.F.E. or Graphite packing for bubble
Flanged Double
Block & Bleed
tight sealing.
• Self centering crimped needle tip for
bubble tight shut off and repeatability.
10 • Available in 316, Monel, Duplex, Super
Duplex, Hasteloy, Inconel, Incoloy, 6Mo,
Carbon Steel, other materials on
11 9 application.
• Stainless steel as standard.
12
• Optional wetted parts in a variety of
8 exotic materials.
13
• Firesafe certified to BS6755 part 2/
7 API 607.
6 • Pressure rating up to 10,000 psig
(690 barg).
5
• Temperature -54°C to 538°C (-65°F to
16
1000°F).
4 • Body to bonnet flange gasket for 100%
14
3 atmospheric seal.
15
• Back stopped spindle for blow out
2
prevention, and minimum atmospheric
leakage.
• Rolled spindle operating threads.
1 • Independent spindle thread bush with
maximum female thread interface.
• Colour coded close contact dust cap
and function label for easy identification.
• Optional: NACE compliance, heat code
trace certification, oxygen clean.
Pressure vs temperature
Pressure Part description
psig (barg) A - A Graphite packing
A - B PTFE packing Item Description
10,000 A
(690) B - B 6000 psig (414 barg) 1 Body
standard PTFE packing
2 Tip
8,000 B - C 6000 psig (414 barg)
(552) standard Graphite packing 3 Joint seal
B - B PEEK tip 4 Packing
6,000 B C - E PCTFE tip
(413) 5 Thrust bush
6 Stem
4,000
(275) 7 Gland adjuster
8 Bridge nuts
2,000
(138) 9 Bonnet-bridge studding
10 Handle
E B C A 11 Grub screw
0
0 100 200 300 400 500 Temperature 12 Dust cap
(32) (212) (392) (572) (752) (932) °C (°F) 13 Bridge
14 Bonnet
15 Body-bonnet studding
When selecting products for specific applications users should refer to our
16 Stud nuts
notice at the bottom of page 2.

Flanged Products
“H” Series globe style needle valve

For safe, reliable and repeatable
Flanged Double
1
Block & Bleed
performance
Part description
2 3
Item Description
5 1 Positive handle retention
4
2 “T” bar
7 3 Dust Cap
4 Gland packing adjuster
6
5 Gland adjuster lock nut
6 Valve Bonnet
9
7 Anti blowout spindle
8
8 Thrust Bush
9 Gland packing (adjustable)
10 Bonnet/body washer
11 11 Spindle tip
10
Features
• Rolled spindle operating threads for low
torque operation.
• Gland packing in PTFE or Graphite for
bubble tight sealing.
• Colour coded close contact dust cap and
function label for easy identification.
• Available in 316L, Monel, Duplex, Super
Duplex, Hasteloy, Inconel, Incoloy, 6Mo,
Pressure vs temperature Titanium, other materials on application.
Pressure
psig (barg) A - A Graphoil packing • T-bar operating handle for low torque
10,000 A A - B PTFE packing function.
(690) B - B 6000 psig (414 barg)
standard PTFE packing • Self centering crimped needle tip for bubble
8,000 B - C 6000 psig (414 barg)
(552) standard Graphoil packing tight seat sealing.
6,000 B
A - D PEEK tip • Close contact dust cap for operating thread
C - E PCTFE tip
(413) protection.
4,000 • Back seated spindle for blow out prevention
(275) C and minimum atmospheric leakage.
2,000 • Adjustable gland with easy access.
(138)
E D B C A
• Gland lock nut for vibration protection.
0
0 100 200 300 400 500 Temp
• Pressure rating up to 10,000 psig
(32) (212) (392) (572) (752) (932) °C (°F) (690 barg).
• Temperature rating -54°C to -538°C
(-65°F to 1000°F)
• Optional bolted bonnet design available,
firesafe certified.
When selecting products for specific applications users should refer to • Optional: NACE compliance, heat code trace
our notice at the bottom of page 2. certification, oxygen clean.

Flanged Products
Anti-tamper spindle T bar handle locking
Flanged Double
Block & Bleed
For key only - part no. ATHKEY/1
Retro-fit kit part number

KITAT without key
KITATK with key
Retro-fit kit part number KITTHL
Bolted bonnet inside screw
10
7
11 6
8 5 Part description
13 Item Description
4
1 Body
14 3 2 Tip
3 Joint seal
12 2
4 Packing
5 Thrust bush
6 Stem
1 7 Nut
8 Gland adjuster
9 Handle
10 Grub screw
11 Dust cap
12 Bonnet
13 Body-bonnet studding
14 Stud nuts
Not available on Low Emission valves

Flanged Products
Monoflange (MF) manifolds

Purpose
Flanged Double
Block & Bleed
This manifold range is designed to replace conventional multiple-valve installations currently in use for interface
with pressure measuring systems. By combining customer specified valves into a single manifold, the number of
leak paths is considerably reduced and the mass of the system is lowered reducing the stresses from loading and
vibration. The result of which substantially improves installation and operational safety factors. Reduction in leakage
path connections together with a one-piece solution also provides positive installation cost savings.
Suitable for Fugitive Emission requirements.
Key advantages of Parker Monoflanges
• Strong construction produced from one piece grain flow
controlled forged body.
• Various flow and valve configurations available allowing true
flexibility to meet all customer requirements.
• Variety of flange sizes and outlet connections.
• Standard materials of Carbon Steel A105,
Low Temperature Carbon Steel A350 LF2,
Stainless Steel A182-F316 and
Duplex Stainless Steel A182-F51.
• Optional materials include Super Duplex, Monel, Hastelloy, 6Mo,
Incoloy 625.
• Incorporation of standard “H” series needle valve technology and
state of the art O.S.&Y. design.
• 4mm Needle valve orifice.
• Ergonomically designed operating handles with low torque
function.
• Full range of customer retro fit handle options.
• User friendly part number and specification construction system.
• Customised designs welcome.
• Available to meet ISO 15848, Class A.
Instrument
outlets
Process
Blanked
outlets
Process
Vertical Horizontal
Instrument outlet connections

One of the unique features Parker can offer users which can further enhance safety factors is the incorporation of
single or twin ferrule compression fittings as an integral part of the outlet connection.
Installation of the instrument which require remote positioning will be interconnected using conventional tube and
fittings, whilst NPT taper threads are accepted as a standard their use involves some form of thread sealant which
adds to the complication of instrument performance through contamination within the system.
Avoiding these taper thread connections wherever possible reduces this contaminant risk and Parker, being a
leading manufacturer of compression type of fittings (which requires no sealant mediums), can incorporate them in
the outlet connection, totally eliminating the contamination risk.

Flanged Products
Monoflange features
• 1/2” to 2” N.B. Flanges (15 to 50 DN).
• ANSI B16.5 150 to 2500 flange class and API
Flanged Double
Block & Bleed
10,000.
• 1/2-14 NPT (female) standard outlet.
• 1/4-18 NPT (female) standard vent.
• Variety of optional end connection sizes and
thread forms including tube connections
1/2”/12mm diameter.
• Standard materials of construction: Stainless
steel ASTM A182 F316/F316L, Carbon steel
MFY100 ASTM A350 LF2/A105, Duplex ASTM A182 F51.
MFY110 • Optional materials include Super Duplex, Monel,
Hastelloy, 6Mo, Incoloy.
• Combined needle and O.S.&Y. valves available.
• Instrument connections A-LOK® inverted
available.
• Raised face and ring type joint flange face
styles.
• One-piece forged construction flange as
standard.
• H needle design with retro fit handle options.
• Optional fire safe designed (and tested) to meet
BS6755 part 2/API 607.
• Pressure boundary designs calculated to ASME
VIII Div. 1 and verified by testing.
• 4:1 Factor of Safety.
MFY140 • Heat code traceable material to EN10204.3.1.
• Bubble tight shut off valve seats 17-4 PH tips
standard.
• Optional PEEK tips available.
• Colour coded functional valves.
• Optional locking and anti tamper devices for all
valve types available.
• NACE MR 0175/ISO 15156 compliant material
available on request.
• Permanent marked body with full order and
specification details.
• Available with various non-threaded
connections, please contact us.
Standard specification:
Outlet - 1/2” FNPT
Vent - plugged 1/4” FNPT
MFH100 Seat - metal to metal
MFH110 Packing - PTFE

Flanged Products
Monoflange (MF) manifold selection and part number construction - made easy
Select the style of Monoflange from the choice of arrangements below noting the complete MF reference.
If the style or arrangement is not shown below please provide full description and specification.
Flanged Double
Block & Bleed
Block bleed block Block bleed block

u 1st Isolate: Needle u 1st Isolate: O.S.&Y.
2nd Isolate: Needle 2nd Isolate: Needle
Vent: Needle Vent: Needle
* *
MFH100 MFY100
s Block block bleed
1st Isolate: Needle
s Block block bleed
1st Isolate: O.S.&Y.
MFH110 MFY110
Block & bleed Block & bleed
1st Isolate: Needle 1st Isolate: O.S.&Y.
MFH120 MFY120
MFH130 MFY130
Double block Double block
2nd Isolate: Needle 2nd Isolate: Needle.
MFH140 MFY140
Single block Single block
MFH150 MFY150
u For dual outlets specify MF*105. s For dual outlets specify MF*115.
For flange to flange variants replace MF*1** with MF*2**.
For bleed port only specify MF*160.
For OS&Y valves on primary and secondary isolates specify MFY102. Please note vent valve is not anti-tamper as standard.

Flanged Products
Example MFY100 B 32T2500 8F V6F A3 F
Flanged Double
1. Monoflange part number
Block & Bleed

1. Insert from page 22
2. Material
A Carbon Steel ASTM A105
B Stainless Steel ASTM A182-F316
D Monel M400 8. Condition
E Duplex ASTM A182-F51 F Firesafe design (primary
F Super Duplex ASTM A182-F53/F55 only - O.S.&Y. needle valve)
G Hastelloy C-276 N NACE
H Low Temp. C. St. ASTM A350 LF2 Combine designators as
K 6Mo required
M Inconel 625 Please Note:
Certification requirements and customer
specifications MUST be provided at enquiry
3. Flange details and order stage.
Flange Flange Face Style Flange Class
Size 7. Valve handle operating options
80 = 1/2” F = Raised Face Spiral 1500 = 150 A* Anti tamper
12 = 3/4” T = Ring Type Joint 3000 = 300 L* Padlock handle locking
16 = 1” 6000 = 600 R* Regulating tip (“H” series
24 = 1 1/2” 9000 = 900 needle valve only)
32 = 2” 1500 = 1500 * Insert valve number 1 = primary,
API specify separately 2500 = 2500
}
DIN see page 28 * 1360 = 150/300/
2 = secondary, 3 = vent, 4 = all.
Padlocks not supplied
*1/2” flange size only 1360 = 600
4. Outlet style (1/2” FNPT is standard 5. Plugged vent (1/4” 6. Valve packing and seat materials
4. NO part designator needed) 5. FNPT is standard * PTFE Packing
Size Connection Style 5. NO part designator * Needle tip 17-4PH St. St.
5. needed) 3 Graphoil (fitted as standard
40M = 1/4” F = Female NPT Thread
60M = 3/8” M = Male NPT Thread Size when fire safe design is specified)
80M = 1/2” A = A-LOK® (inverted V6 = 3/8” FNPT PN PEEK Needle tip all valves (non
M60 = 6mm A = only) V8 = 1/2” FNPT fire safe only)
M10 = 10mm G = Swivel gauge * fitted as standard no part NO
M12 = 12mm G = adaptor 1/2” designator required.
G = NPTF (fitted)
When selecting products for specific applications users

should refer to our notice at the bottom of page 2. IMPORTANT NOTES
All non wetted parts will be supplied in standard stainless steel for exotic materials. For carbon steel construction trim materials will be
supplied in stainless steel.
Ring type joints (T) CANNOT be supplied for 1/2” & 3/4” class 150 flanges.
St. St. grades 302 and 304 are NOT used in the construction of any of these products.
For customer specific options not covered here engineering will allocate a part number at quotation stage.
Certification requirements and customer specifications MUST be provided at enquiry and order stage.
For API flange requirements full details must be specified separately.
Part number example MFY100B32T2500A3F Monoflange - Double Block and Bleed - Block (O.S.&Y.) Bleed (Needle) Block (Needle)
(MFY100) - 316 St. St. construction (B) - 2” Pipe flange, Ring type joint, class 2500 (32T2500) - 1/2” female NPT outlet - 1/4” Female NPT
vent - Anti-tamper vent (A3) - Firesafe design and certified (F), valves fitted with PTFE packing, metal seated 17-4PH st.st. tips.

Flanged Products
Pro-Bloc® (PB) Manifolds

Purpose
Flanged Double
Block & Bleed
This manifold range is designed to replace conventional multiple-valve installations currently in use for interface
with pressure measuring systems. By combining customer specified valves into a single manifold, the number of
leak paths is considerably reduced and the mass of the system is lowered reducing the stresses from loading
and vibration. The result of which substantially improves installation and operational safety factors. Reduction in
leakage path connections together with a one-piece solution also provides positive installation cost savings.
Key advantages of Parker Pro-Bloc®
• Strong construction produced from one piece grain flow
controlled forged body.
• Various flow and valve configurations available allowing true
flexibility to meet all customer requirements.
• Single flange, double flange or triple flange configurations
available.
• Standard materials of Carbon Steel A105,
Low Temperature Carbon Steel A350 LF2,
Stainless Steel A182-F316 and
Duplex Stainless Steel A182-F51.
• Optional materials include Super Duplex, Monel, Hastelloy, 6Mo,
Incoloy 625.
• Incorporation of standard Hi-Pro ball valve and “H” series needle
valve technology.
• 10mm/15mm/20mm/25mm full bore valve design.
• Ergonomically designed operating handles with low torque
function.
• User friendly part number and specification construction system.
• Optional integral A-LOK®/CPI™ outlet connection.
• Parker Tru-loc™ (patent pending) safety system.
Tru-Loc
Mechanical Sealed End Connection
Designed specifically for Pro-Bloc end
connection security. Extensive tests have
proved that end connections locked with the
Tru-Loc (PP) end connector locking mechanism
give 100% security and prevent end connector
movement when disconnecting instruments or
connectors. This ensures that the Ball Seat is
securely positioned at all times.
Instrument outlet connections
One of the unique features Parker can offer users which can further enhance safety factors is the incorporation of
single or twin ferrule compression fittings as an integral part of the outlet connection.
Installation of the instrument which require remote positioning will be interconnected using conventional tube and
compression fittings, whilst NPT taper threads are accepted as a standard their use involves some form of thread
sealant which adds to the complication of instrument performance through contamination within the system.
Avoiding these taper thread connections wherever possible reduces this contaminant risk and Parker, being a
leading manufacturer of compression type of fittings (which requires no sealant mediums), can incorporate them
in the outlet connection, totally eliminating the contamination risk.

Flanged Products
Pro-Bloc® features
• 1/2” to 3” N.B. Flanges (15 to 50 DN).
• ANSI B16.5 150 to 2500 flange class and API
Flanged Double
Block & Bleed
10,000.
• 10mm/15mm/20mm/25mm full bore valve design.
• 1/2”-14 to 1”-11.5 NPT (female) standard outlet
(depending on bore size).
• 1/2” NPT (female) standard vent.
PB*100
• Variety of optional end connection sizes and
thread forms including tube connections up to
1”/25mm diameter (depending on bore size).
• Standard materials of construction: Stainless steel
ASTM A182 F316/F316L, Carbon steel ASTM
A350 LF2/A105, Duplex ASTM A182 F51.
• Optional materials on request.
• Instrument connections A-LOK®/CPI™ available.
• Raised face and ring type joint flange face styles.
PB*120 • One-piece forged construction flange as standard.
• Optional fire safe designed (and tested) to meet
BS 6755 Part 2/API 607.
• 316 stainless steel handles and trim as standard to
reduce the risk of corrosion.
• Designed to meet the pressure and temperature
requirements of ASME/ANSI B16.34/B16.5.
• Pressure boundary designs calculated to ASME
VIII Div 1 and verified by testing.
• 4:1 Factor of Safety.
• Heat code traceable material to EN10204.3.1.
• Bubble tight shut off.
• Colour coded functional valves.
• Optional locking and anti tamper devices for all
PB*160 valve types available.
• Positive lever stop.
• NACE MR 0175/ISO 15156 compliance available
on request.
• Large user friendly handles.
• Permanent affixed reference label.
• O.S.&Y. and “H” series needle valves can be
combined with ball valves.
* Select bore size
Y - 10mm, X - 15mm, W - 20mm, V - 25mm
PB*220
Standard specification flange x screw:
Outlet - FNPT; Vent - 1/2” FNPT plugged;
Ball seats. P.T.F.E.; Needle seats, metal/metal
17-4 PH St. St.; P.T.F.E. packing all valves.

Flanged Products
Pro-Bloc® (PB) manifold selection and part number construction - made easy
Select the style of Pro-Bloc from the choice of arrangements below noting the complete PB reference.
* Select ball bore size, Y = 10mm, X = 15mm, W = 20mm, V = 25mm. e.g. PWB100 = 20mm ball bore.
Flanged Double
Block & Bleed
l Only available with 10mm bore ball valve.

Flange x screw Flange x flange
1st Isolate: Ball 1st Isolate: Ball
2nd Isolate: Ball 2nd Isolate: Ball
PB*100 PB*200
l Flange x screw l Flange x flange
PBY110 PBY210
Vent: Ball Vent: Ball
PB*120 PB*220
PB*130 PB*230
Vent: Ball Vent: Ball
PB*140 PB*240
PBY150 PBY250
PB*160 * PB*260
Single isolate. specify PB*165, PB*265.

Flanged Products
Example PB*100 B 32T2500 8F V6F AT3 F
Flanged Double
1. Pro-Bloc part number
Block & Bleed

2. Material
A Carbon Steel ASTM A105 8. Condition
B Stainless Steel ASTM A182-F316 F Firesafe design
D Monel M400 N NACE
E Duplex ASTM A182-F51 Combine designators as
F Super Duplex ASTM A182-F53/F55 required
G Hastelloy C-276
Please Note:
H Low Temp. C. St. ASTM A350 LF2
Certification requirements and customer
K 6Mo
L 825
and order stage.
M Inconel 625
7. Valve handle operating options
3. Flange details A* Anti tamper (Needle Valve
only)
L* Padlock handle locking
Size
R* Regulating tip (“H” series
‡80 = 1/2” F = Raised Face Spiral 1500 = 1500 Needle Valve only)
‡12 = 3/4” T = Ring Type Joint 3000 = 3000 S* Spanner actuated (Ball Valve
‡16 = 1” 6000 = 6000 only)
‡24 = 1 1/2” 9000 = 9000 Y* O.S.&Y. Needle Valve
‡32 = 2” 1500 = 1500 * Insert valve number 1 = primary,
‡48 = 3” (25mm bore only) 2500 = 2500 2 = secondary, 3 = vent, 4 = all.
‡API specify separately ‡ Certain flange/bore size combinations
}
‡DIN See page 28 not available - consult factory
Note: Firesafe needle valve with
locking device NOT available
4. Outlet style (each bore size has its 5. Plugged vent (1/2”
own standard size female NPT outlet - 5. NPTF as standard 6. Packing, seat and construction
the standard does not require this field 5. NO part designator 6. options
to be completed) 5. needed) * PTFE Packing
Standard outlets (female NPT) * PTFE Ball seats
10mm bore = 1/2” * Needle tip 17-4PH St. St.
15mm bore = 1/2” PK PEEK Ball and needle seating
20mm bore = 3/4” PB PEEK Ball seats
25mm bore = 1” PN PEEK Needle tip (non firesafe only)
For optional outlets see page 28 BC Bolted construction connection
* fitted as standard no part NO
designator required.
Modular designs are available upon

application
Flange x screw PB*500 series

Flange x flange PB*600 series

Flanged Products
Other flange detail options Other outlet options

(reference Box 3 flange (reference Box 4 outlet style pages
details pages 23, 27, 37, 39) 23, 27, 37, 39)
Flanged Double
Block & Bleed
3. Flange details API 6A / ISO 10423* 4. Optional outlets

(Dimensionally compliant only) Size Connection Style
Flange Flange 14 = 1/4” F = Female NPT
Size Rating 16 = 3/8” M = Male NPT
29 = 1 13/16” 12K = 2000 psig0 18 = 1/2” A = A-LOK®
33 = 2 1/16” 13K = 3000 psig0 10 = 5/8” Z = CPI™
1 41 = 2 9/16” 15K = 5000 psig0 12 = 3/4” G = Swivel gauge adaptor
10K = 10000 psig 14 = 7/8” 1/2” Female NPT (fitted)
(not available for 16 = 1”/0
fugitive emission
products). 0M6 = 06mm
* Only available with 10mm bore (PBY) and M10 = 10mm
M12 = 12mm
Monoflange products.
M14 = 14mm
M15 = 15mm
3. Flange details DIN M16 = 16mm
Flange Flange M18 = 18mm
Size Class M20 = 20mm
DN10 PN6 M22 = 22mm
DN15 PN10 M25 = 25mm
DN20 PN16 Note: Contact factory for bore size/outlet connection combinations
DN25 PN40
DN32 PN100
DN40
DN50

should refer to our notice at the bottom of page 2.
IMPORTANT NOTES
All non wetted parts will be supplied in standard stainless steel for exotic materials. For carbon steel construction trim materials will be supplied in
stainless steel.
For flange to flange construction when the required flanges are different sizes then specify both sizes in section 3 example: 1st flange 1” pipe (16), raised
face (F), class 900 (900), 2nd flange 1/2” (8), raised face (F), class 900 (900) insert: 16F9008F900. Consult factory for available combinations.
Part number example FEPBY100B32T2500F Fugitive Emission Pro-Bloc - Flange by screw - Double Block and Bleed - Block (Ball) Bleed (Needle) Block
(Ball) (FEPBY100) - 316 St. St. construction (B) - 2” Pipe flange, Ring type joint, class 2500 (32T2500) - 1/2” female NPT outlet - 1/2” Female NPT vent -
Firesafe design and certified (F), all valves PTFE packed, ball seats PTFE, needle valve metal seated 17-4PH st.st. tips.

Flanged Products

Pro-Bloc® for sampling applications (10mm + 15mm bore only)
Flanged Double
Block & Bleed
This manifold range is designed to replace conventional multiple-valve installations where sampling of the process
stream is required. This design has been developed to remove a sample directly from the process stream at full
system pressure. All of the options and configurations shown within the standard Pro-Bloc range can be offered
for sampling service by the addition of a customised sampling probe which extends from the pipe flange into the
process stream. Also available to suit ISO15848 Class ‘A’ fugitive emission standard.
Pro-Bloc® for sampling applications - part numbering Bore Flange range

In order to specify the addition of a sampling probe to your Pro-
Bloc simply add an “S” to the beginning of the part number i.e. 10mm Size 1” and above, ASME flanges up to class 2500.
SPB or FESPB… The probe length in “mm” must be added to the 15mm Size 1 1/2” and above, ASME flanges up to class 2500.
end of the part number, see below. Due to the internal bore size 20mm Not available
of standard ASME flanges probes can only be installed on a range 25mm Not available
of flanges - please see the attached table.
The probe length must be specified from the raised face to the end of the probe in mm, to the nearest mm.
Probes are supplied to suit the insertion length required by the pipeline and thus must be specified by the customer.
A wide variety of end preparations and support collars are available on request.
Probe strength wake frequency calculations can be carried out against pipeline flow rates on request.
In the event of the required valve configuration not be shown please do not hesitate to contact the factory as Parker
Hannifin IPD offer bespoke customer solutions.

Flanged Products

Pro-Bloc® for injection applications (10mm + 15mm bore only)
Flanged Double
Block & Bleed
This manifold range is designed to replace conventional multiple-valve installations where injection into the
process stream is required. This design has been developed to inject directly into the process stream at full system
pressure. All of the options and configurations shown within the standard Pro-Bloc range can be offered for
injection service by the addition of a customised injection probe which extends from the pipe flange into the
process stream. Pro-Bloc’s for injection applications include an injection probe which enables the fluid to be
injected directly into the process stream and a high integrity full bore non-return valve to eliminate the risk of back
flow out of the process stream. Also available to meet ISO15848 Class ‘A’ fugitive emission standard.
Pro-Bloc® for injection applications - Hi-Check non-return valve

part numbering This high integrity full bore non-return valve eliminates
In order to specify the addition of an injection probe and the risk of back flow out of the process stream. The
non-return valve to your Pro-Bloc simply add a “J” to design utilises a spring loaded poppet to ensure leak
the beginning of the part number i.e. JPB or FEJPB… proof performance. The Hi-Check Non Return Valve is
The probe length in “mm” must be added to the end of designed for higher flow and low pressure drop across
the part number, see below. Due to the internal bore size the valve - having a larger through bore than most
of standard ASME flanges probes can only be installed other manufacturers equivalent product.
on a range of flanges - please see the table in the As standard a viton seal will be supplied with a “crack”
sampling Pro-Bloc section (previous page). pressure of 10 psig. A wide variety of seat materials
The probe length must be specified from the raised face and crack pressures are available on request.
to the end of the probe in mm, to the nearest mm. In the event of the required valve configuration not
Probes are supplied to suit the insertion length required being shown please do not hesitate to contact the
by the pipeline and thus must be specified by the factory as Parker Hannifin IPD offer bespoke customer
customer. solutions. See Catalogue 4190-CV for more details.
A wide variety of end preparations and support collars
are available on request.
Probe strength wake frequency calculations can be
carried out against pipeline flow rates on request.

Flanged Products
Meeting the ISO Standard

From October 2007 all UK processing plants and power
Flanged Double
Block & Bleed
stations will have to comply with the EU’s IPPC directive
96/61/EC. In essence, the IPPC Directive is about
minimising pollution from various industrial sources
throughout the European Union. An important part of
this legislation is reducing fugitive emissions, which will
have significant consequences for all processes.
According to the IPPS all plants and factories which fail
to comply with the standards set by the directive may
be closed from this point.
To put the scale of the challenge into perspective, a
typical European refinery loses between 600 and 10,000
tonnes of emissions per annum. Around 70% of these
losses are estimated to be caused by plant equipment
such as pipe flanges, pumps, valves and vessels.
Leakage from valves is often the biggest culprit,
reportedly accounting for around 50% of the fugitive
emissions within the chemical and petrochemical
industries.
Irrespective of the environmental impact, there is a Parker Hannifin is now able to offer our full range of
tremendous financial burden on industry because it flanged products with a class A approval to ISO
represents a huge loss of product, and cause of plant 15848-1. These products are identified as the Fugitive
inefficiency. However, the true costs to industry are not Emissions [Fe] range and are certified as ISO FE AH-
always appreciated, as many of the costs associated C01-SSA1-t(RT,180°C)-ANSI2500-ISO 15848-1. This
with fugitive emissions are hidden. Such as labour and states that the product has been classified as meeting
materials to repair leaks, wasted energy, environmental the ISO 15848-1 standard with the following criteria;
fines and clean up costs, lost sales due to a poor green • Class A tested with Helium
image, claims for personal injury and more. In this way,
reducing fugitive emissions not only protects the • Endurance class C01 – a mechanical valve which
environment, but can save companies time and money. has been tested throughout 500 mechanical
actuations with two thermal cycles
With the above in mind, the legislation introduces a
• Temperature class RT-180°C – Fully thermal cycled
concept of Best Available Technique (BAT), urging
and tested from -29°C to +180°C Pressure class
plants to find the best available solution for reducing
ANSI 2500 – 6000 psi in 316 st.st.
fugitive emissions throughout the process, from areas
such as design, product selection, fitting and fitter Part 2 of the international standard covers production
training, to maintenance, site monitoring, and so on. acceptance testing of valves. This production testing
can only be carried out to product which has already
With regard to the design and site monitoring of fugitive
been approved to part 1 of the standard. Production
emissions ISO 15848 parts 1 and 2 have been
testing can be carried out to and sampling percentage
developed respectively.
specified by the purchaser with a minimum of one per
Part 1 covers the classification system and qualification lot. The production testing is a simpler helium sniffer
procedure for type testing of valves. The standard test which is carried out at room temperature with no
specifies three tightness classes of leakage with respect mechanical actuations.
to stem sealing diameter. These classes are class A, B
and C. Class A having the smallest environmental
leakage. Each class level is one hundred fold lower than
the class above i.e. a class B product may have a
leakage of 100 times that of a class A product. The
standard also specifies the duty that the valve has been
tested to.

Flanged Products
Meeting the ISO Standard

Parker is now able to offer it’s range of Pro-Bloc Double Block and bleed valves and Monoflanges to meet the new
ISO 15848 standard for Fugitive Emissions. The new designs provide process instrument interfaces of outstanding
Flanged Double
Block & Bleed
integrity to help processing organisations dramatically enhance their LDAR (leak detection and repair) programmes.
ISO 15848 standard

ISO 15848 parts 1&2 (defining a classification system and qualification procedures, and production acceptance
test of industrial valves, respectively) specify new ultralow standards for emissions. This standard is becoming the
requirement for oil and gas and petrochemical organisations worldwide. The standard was originally created for
process valves and control valves but is now being applied to Instrumentation valves which include primary isolation
valves, especially on environmentally sensitive projects.
Meeting these low levels is a challenge, which Parker Instrumentation has solved with the new ball and needle
valve designs used in these Double Block and Bleed valves and monoflanges. These designs meet the highest
class ‘A’ level over the temperature range -29°C to +180°C celsius, alongside the standard instrumentation manifold
pressure ranges.
Production testing and certification is available upon request. Please specify sample quantity required for production
testing with your order.
O-ring material grade is a fluoroelastomer FKM tetrapolymer, specially formulated for explosive decompression
(ED) resistance. The seals are qualified to the stringent Norsok M-170 standard that covers both ED resistance and
sour gas (H2S) ageing tests.
Features
• Class ‘A’ leakage rates achieved.
• Bolted ball valve bonnet assembly.
• All threads sealed from the media
• All ball valves are bi-directional.
• Firesafe design available.
Key
1 helium at 97% purity 6 standard calibrated leak
2 pressure control 7 vacuum safety
3 actuator 8 tested stem sealing
4 vacuum 9 helium mass spectrometer
5 helium 10 data acquisition
Prototype testing schematic
as per ISO 15848-1 IF IN DOUBT ASK
U
Ball valve ISO 15848-1
Prototype testing assembly
2007

Flanged Products
Fugitive Emissions flange product ball valve specification

Handle options on page 16
Flanged Double
16
Block & Bleed

15
Part description
Item Description
14
17 1 End Connector
13 2 E-seal™
18
3 Sealing washer
12 19 4 Antiextrution rings
5 Seats
20 6 Ball
7 Anti blowout stem
11 21 8 Antiextrution rings
9 Gland packing
10
10 Sealing washer
9 11 Antiextrution rings
22 12 Peek thrust bush
8
13 Stop pin
14 Thrust bush
15 Locknut
7
16 Locking dome nut
6 17 Handle
18 Bonnet strud
19 Lock nut
5
20 Bolted bonnet
21 Elastomeric o-ring
4 3 2 1
22 Body
Specifications
• Tightness class A >1 x 10-6 mg.s-1.m-1.
• Maximum cold working pressure rating FE Flange products ball valve 10mm and 15mm bore
6,000 psig. 7000
6000 Stainless Steel

• Temperature rating PEEK seat
Working pressure (psi)
-29˚C to 180˚C (-20˚F to 356˚F). 5000
4000
• ISO15848-1 prototype tested using global Stainless Steel
helium vacuum method. 3000 PTFE seat
2000
• Performance class –
ISO FE AH-C01-SSA1-t(RT,180°C)-ANSI2500-ISO 15848-1 1000
0
• Production testing and certification available on request. 0 30 60 90 120 150 180
Temperature (°C)
• Other specifications as per standard Hi-Pro, see page 16.
FE Flange products ball valve 20mm bore FE Flange products ball valve 25mm bore
6000 6000
Stainless Steel Stainless Steel
PHlex seat
5000 5000 PHlex seat

Stainless Steel
4000 PEEK seat 4000
Stainless Steel
3000 3000 PEEK seat
Stainless Steel
2000 PTFE seat 2000 Stainless Steel
PTFE seat
1000 1000
0 0
0 30 60 90 120 150 180 0 30 60 90 120 150 180
Temperature (°C) Temperature (°C)
When selecting products for specific applications users should refer to our
notice at the bottom of page 2.

Flanged Products
Fugitive Emission outside screw and yoke (OS&Y) needle valve

Flanged Double
Block & Bleed
11 Part description
12
Item Description
10
1 Body
2 Spindle Tip
3 Elastomeric o-ring (body seal)
13 9
4 Body joint seal
8 5 Gland packing (adjustable)
6 Thrust bush
14
7 Bonnet bridge studding
7
8 Anti blow-out spindle
15 9 Bridge nuts
6
10 Dust cap
11 Handle
5
13 Bridge
14 Gland adjuster
4
15 Stud nuts
16 Body bonnet studding
17 17 Anti extrusion rings
18 Bonnet end cap
3
1
18
Specifications
• Tightness class A >1 x 10-6 mg.s-1.m-1.
6,000 psig (414barg).
Pressure vs temperature • Temperature rating
A - A Graphite packing
-29˚C to 180˚C (-20˚F to 356˚F).
Pressure A - B PTFE packing
psig (barg) • ISO15848-1 prototype tested using global
B - B 6000 psig (414 barg)
standard PTFE packing helium vacuum method.
6,000 AB
(413) B - C 6000 psig (414 barg) • Performance class –
standard Graphite packing
A - D PEEK tip ISO FE AH-C01-SSA1-t(RT,180°C)-ANSI2500-ISO 15848-1
C - E PCTFE tip
• Production testing and certification available on request.
4,000 • Other specifications as per standard OS&Y, see page 17.
(275)
C
ACD
2,000
(138)
0 E
0 60 120 180 Temp When selecting products for specific applications users
(32) (140) (248) (356) °C (°F) should refer to our notice at the bottom of page 2.

Flanged Products
Fugitive Emissions “H” Series globe style needle valve
Flanged Double
Block & Bleed
Part description
2
Item Description
1 Positive handle retention
2 “T” bar
1 3 Dust cap
4
4 Gland packing adjuster
5 3 5 Gland adjuster lock nut
6 Valve bonnet
7 Thrust bush
6 7 9 Anti blow-out spindle
10 Anti extrusion ring
8 11 Elastomeric o-ring (stem seal)
12 Anti extrusion ring
10 21
13 Elastomeric o-ring (body seal)
14 Bonnet end cap
15 Spindle tip
11
12
15
13
14
Specifications
• Tightness class A = >1 x 10-6 mg.s-1.m-1.
6,000 psig (414barg).
Pressure vs temperature • Temperature rating
A - A Graphite packing -29˚C to 180˚C (-20˚F to 356˚F).
Pressure A - B PTFE packing
psig (barg) B - B 6000 psig (414 barg)
• ISO15848-1 prototype tested using global
standard PTFE packing helium vacuum method. IF IN DOUBT ASK
6,000 AB
B - C 6000 psig (414 barg)
(413)
standard Graphite packing • Performance class – U
A - D PEEK tip ISO FE AH-C01-SSA1-t(RT,180°C)-ANSI2500-ISO 15848-1
C - E PCTFE tip
AC • Production testing and certification available on request.
4,000 B
(275)
• Other specifications as per standard needle valve, see
2007
D page 18.
C
2,000
(138)
0 E
0 60 120 180 Temp When selecting products for specific applications users
(32) (140) (248) (356) °C (°F) should refer to our notice at the bottom of page 2.

Flanged Products
ISO15848 Class ‘A’ Fugitive Emission monoflanges - made easy

Select the style of Monoflange from the choice of arrangements below noting the complete FEMF reference.
If the style or arrangement is not shown below please provide full description and specification.
Flanged Double
Block & Bleed

u 1st Isolate: Needle u 1st Isolate: O.S.&Y.
* *
FEMFH100 FEMFY100
s Block block bleed
1st Isolate: Needle
s Block block bleed
1st Isolate: O.S.&Y.
FEMFH110 FEMFY110
FEMFH120 FEMFY120
FEMFH130 FEMFY130
2nd Isolate: Needle 2nd Isolate: Needle.
FEMFH140 FEMFY140
Single block Single block
FEMFH150 FEMFY150
u For dual outlets specify FEMF*105. s For dual outlets specify FEMF*115.
For flange to flange variants replace FEMF*1** with FEMF*2**.
For bleed port only specify FEMF*160.
For OS&Y valves on primary and secondary isolates specify FEMFY102. Please note vent valve is not anti-tamper as standard.

Flanged Products
ISO15848 Class ‘A’ Fugitive Emission Monoflanges

Example FEMFY100 B 32T2500 8F V6F A3 F
Flanged Double
Block & Bleed
1. Monoflange part number
2. Material
D Monel M400 8. Condition
E Duplex ASTM A182-F51 F Firesafe design (primary
F Super Duplex ASTM A182-F53/F55 only - O.S.&Y. needle valve)
G Hastelloy C-276 N NACE
H Low Temp. C. St. ASTM A350 LF2 Combine designators as
K 6Mo required
M Inconel 625 Fugitive Emission production
testing available on request
Please Note:
3. Flange details Certification requirements and customer
and order stage.
Size
80 = 1/2” F = Raised Face Spiral 1500 = 150
12 = 3/4” T = Ring Type Joint 3000 = 300 7. Valve handle operating options
16 = 1” 6000 = 600
24 = 1 1/2” 9000 = 900 A* Anti tamper
32 = 2” 1500 = 1500 L* Padlock handle locking
API specify separately 2500 = 2500 R* Regulating tip (“H” series
}
DIN see page 28 * 1360 = 150/300/
needle valve only)
* Insert valve number 1 = primary,
*1/2” flange size only 1360 = 600
2 = secondary, 3 = vent, 4 = all.
4. Outlet style (1/2” FNPT is standard 5. Plugged vent (1/4”

4. NO part designator needed) 5. FNPT is standard 6. Valve packing and seat materials
Size Connection Style 5. NO part designator * PTFE Packing
5. needed) * Needle tip 17-4PH St. St.
40M = 1/4” F = Female NPT Thread
60M = 3/8” M = Male NPT Thread Size 3 Graphoil (fitted as standard
80M = 1/2” A = A-LOK® (inverted V6 = 3/8” FNPT when fire safe design is specified)
M60 = 6mm A = only) V8 = 1/2” FNPT PN PEEK Needle tip all valves (non
M10 = 10mm G = Swivel gauge fire safe only)
M12 = 12mm G = adaptor 1/2” * fitted as standard no part NO
G = NPTF (fitted) designator required.

IMPORTANT NOTES
All non wetted parts will be supplied in standard stainless steel for exotic materials. For carbon steel construction trim materials will be
supplied in stainless steel.
Part number example FEMFY100B32T2500A3F Monoflange - Double Block and Bleed - Block (O.S.&Y.) Bleed (Needle) Block (Needle)
(FEMFY100) - 316 St. St. construction (B) - 2” Pipe flange, Ring type joint, class 2500 (32T2500) - 1/2” female NPT outlet - 1/4” Female
NPT vent - Anti-tamper vent (A3) - Firesafe design and certified (F), valves fitted with PTFE packing, metal seated 17-4PH st.st. tips.

Flanged Products
ISO15848 Class ‘A’ Fugitive Emission Pro-Blocs

Select the style of Pro-Bloc from the choice of arrangements below noting the complete FEPB reference.
* Select ball bore size, Y = 10mm, X = 15mm, W = 20mm, V = 25mm. e.g. FEPWB100 = 20mm ball bore.
Flanged Double
Block & Bleed
l Only available with 10mm bore ball valve.

FEPB*100 FEPB*200

l Flange x screw
1st Isolate: Ball
l Flange x flange
1st Isolate: Ball
FEPBY110 FEPBY210

FEPB*130 FEPB*230

FEPBY150 FEPBY250

FEPB*160
* FEPB*260
Single isolate. specify FEPB*165, FEPB*265.

Flanged Products
ISO15848 Class ‘A’ Fugitive Emission Pro-Blocs

Example FEPB*100 B 32T2500 8F V6F AT3 F
Flanged Double
Block & Bleed
1. Pro-Bloc part number
2. Material 8. Certification & condition

F Firesafe design and certified
H Heat code certificates to
D Monel M400
EN10204.3.1.B
E Duplex ASTM A182-F51
N NACE
F Super Duplex ASTM A182-F53/F55
Combine designators as
G Hastelloy C-276
required
H Low Temp. C. St. ASTM A350 LF2
Fugitive Emission production
K 6Mo
testing available on request
L 825
M Inconel 625 7. Valve handle operating options
A* Anti tamper (Needle Valve
only)
3. Flange details L* Padlock handle locking
Flange Flange Face Style Flange Class R* Regulating tip (“H” series
Size Needle Valve only)
‡80 = 1/2” F = Raised Face Spiral 1500 = 1500 S* Spanner actuated (Ball Valve
‡12 = 3/4” T = Ring Type Joint 3000 = 3000 only)
‡16 = 1” 6000 = 6000 Y* O.S.&Y. Needle Valve
‡24 = 1 1/2” 9000 = 9000 * Insert valve number 1 = primary,
‡32 = 2” 1500 = 1500 2 = secondary, 3 = vent, 4 = all.
‡48 = 3” (25mm bore only) 2500 = 2500
Note: Firesafe needle valve with
‡API specify separately ‡ Certain flange/bore size combinations
}
‡DIN See page 28 not available - consult factory
locking device NOT available
6. Packing, seat and construction

4. Outlet style (each bore size has its 5. Plugged vent (1/2” 6. options
own standard size female NPT outlet - 5. NPTF is standard * PTFE Packing
the standard does not require this field 5. NO part designator * PTFE Ball seats
to be completed) 5. needed) * Needle tip 17-4PH St. St.
Standard outlets (female NPT) PK PEEK Ball and needle seating
10mm bore = 1/2” PB PEEK Ball seats
15mm bore = 1/2” PN PEEK Needle tip (non firesafe only)
20mm bore = 3/4” BC Bolted construction connection
25mm bore = 1”
* fitted as standard no part NO
For optional outlets see page 28
designator required.

CCIMS
Page 43 CCIMS : The Concept
CCIMS
Page 44/45 CCIMS : The Benefits
Page 46/47 Design and Test References
Page 48 Solution Configurations
Page 49 Primary (Isolation) Modute Options
Page 50/51 Secondary (Instrument) Module Options
Page 53 Auxiliary Modules & Options
Page 54/55 How to Order
Page 56/57 Valve Design & Performance Properties
Page 58/59 Basic Installation Guide

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

CCIMS

Instrumentation
Hand Valves
Catalog 4190-HV
January 2007
Hand Valves
Hand Valves
Contents
Page 63 Introduction
Page 64/65 Bonnet assembly details
Page 66/67 Globe style bar stock needle valves

(HNV series) 6,000 psig/414 barg
Hand Valves
Page 68/69 Globe style bar stock needle valves

(HNV series) 10,000 psig/689 barg
Page 70/71 Rising plug valves (HRPV series)
Page 72/73 Multi-port gauge valves (HGV series)
Page 74/75 Single port gauge valves with vent (HVG series)
Page 76/77 Outside screw & yoke globe pattern needle

valves (HYNV series)
le (HN )
Need V s page
(HN ) serie 8 &
s
serie 6 page
no. &9
Part ix page
suff &7 3
Page 78 Option and suffix’s 3
3 3
3
3 3
9
3 3
PK
Page 79 Materials and specifications dle

Nee ries)
Risin
(HRP
se pag
dle (HNV e 8 & 9
Nee ries) pag
se
(HNV e 6 & 7
ag 3

Hand Valves
Introduction
With years of valve design and development experience Parker Hannifin are able to offer the most comprehensive
range of instrument hand valves available to users for a wide variety of markets, industries and applications. Now
consolidated into one catalogue Parker is able to offer a simplified system of selection and choice for all Instrument
applications and installations.
In addition to producing valves and manifolds Parker also makes twin and single ferrule compression fittings
A-LOK® and CPI™ which are used
extensively in the oil, gas, petro-chem, power,
processing and many other industries.
Combining these as an integral part of the
valve body users can eliminate pipe threaded
connections reducing leak paths and avoiding
Hand Valves
the use of thread sealant, a frequent menace
to instrument and system performance.
For higher pressure ratings up to 15,000 psig

Parker can now offer their new MPI™ range
of compression fittings.
All the valves offered in this catalogue are

available with integral compression ends
improving system performance, safety
factors, size and weight reduction, simplifying
installation and ultimately reducing customer
costs.
Continuous product development may from

time to time necessitate changes in the
details contained in this catalogue. Parker
Hannifin reserve the right to make such
changes at their discretion and without prior
notification.
All dimensions shown in this catalogue are approximate and subject to change.

Hand Valves
Globe style bonnet design for HNV, HGV and HVG series
1. Positive handle retention design featuring For safe reliable and 3. Dust Cap
broached square engagement positioned by repeatable performance This has a dual purpose, preventing air born
thread locked grub screw. debris from contaminating the operating
spindle thread and providing colour coded
2. “T” bar
functional identification. Isolate (BLUE).
Ergonomically designed for ease of operation.
Anti-tamper and lockable devices can be 5. Gland adjuster lock nut
supplied for on site retro-fit. A secure anti vibration locking mechanism to
prevent inadvertent gland adjuster loosening.
4. Gland packing adjuster
For maximum packing stability and performance, 7. Anti blowout spindle
simple and easily adjustable for gland wear Designed for low torque operation with high
compensation. quality micro mirror stem finish for positive
gland sealing.
6. Valve Bonnet
Standard construction for maximum pressure 9. Gland packing (adjustable)
rating with replaceable bonnet sealing washer Chevron effect dual piece gland packing to
arrangement. provide maximum sealing area contact with
minimum gland adjustment.
8. Thrust Bush
Anti rotational adjustor bush ensures uniform 11. Spindle tip
packing compression, maximising pressure tight Self centering, non-rotational tip gives
Hand Valves
sealing and limiting cold flow passages. successive positive bubble tight shut off
assuring the user of leakage free performance
10. Bonnet/body washer and downstream functional safety.
Annealed sealing washer to ensure complete
atmospheric leakage and allowing on site retro-
fit of bonnets with 100% re-sealing assurance.
All metallic standard parts are produced in stainless steel, for alternative materials please refer to page 79.
Manifolds produced in other specified materials will be provided with non-wetted parts as standard in stainless
steel, this applies to items 1, 2, 4, 5 & 8.
Specification Features
• Height closed (standard and HP) = 47mm (1.85"). • Standard unit throughout hand valve range.
Height open (standard and HP) = 50.3mm (2.00"). • Operating threads outside washout area.
• Number of turns open/close - 3.5. • Externally adjustable gland.
• Stainless steel construction.
• Maximum standard pressure up to 6,000 psig (414
• Low operating torque.
barg). • Alternative 10,000 psig (689 barg) range available.
• Maximum optional pressure up to 10,000 psig (689 • Retro-fit kit for:-
barg). See page 68/69. Anti-tamper spindle.
• Temperature rating -54C to +538C (-65F to +1000F). Panel mounting.
• PTFE standard gland packing (Graphoil optional).
Lockable T bar.
• Maximum temperature PTFE 260C (500F).
• Maximum temperature Graphoil 538C (1000F). Handwheel with lockable option.
• Bonnet locking pin to prevent accidental removal
Pressure vs temperature fitted as standard.
Pressure
psig (barg) A-A Graphoil packing (optional high pressure) • Alternative graphoil packing for high temperature
10,000 A A-B PTFE packing (optional high pressure) performance available.
(689) B-B 6000 psig (414 barg) standard PTFE packing
B-C 6000 psig (414 barg) standard Graphoil • Alternative self centering tip materials available for
8,000 packing gaseous and aggressive fluids.
(552) B - D 6000 psig (414 barg) PEEK tip
A - D PEEK tip
• Safety back seated spindle prevents stem blowout
6,000 B
C - E PCTFE tip and provides secondary back up stem seal.
(413)
• Packing below threads to prevent lubricant
4,000 washout.
(275) C
• All valves 100% factory tested.
2,000
(138) • NACE compliant wetted parts available.
E D B C A • Optional cleaned and lubricated suitable for
0
Oxygen service.
0 100 200 300 400 500 Temperature
(32) (212) (392) (572) (752) (932) °C (°F) • Heat code traceable body and bonnet.
When selecting products for specific applications users should refer to our notice at the bottom of page 2.

Hand Valves
Optional globe style bonnet design for HNV, HGV and HVG series
For on-site assembly
The design options below can be simply retrofit to any NV, GV and VG series standard valves. Retrofit kit part numbers
are listed next to the illustrated option and all parts will be supplied in stainless steel regardless of the parent body
material.
For factory fitted assembly
To obtain factory assembled options the valve part number must be suffixed with the option and function
designator. Options can be combined:-
Example HNV*8FFAT – NV series valve, factory fitted with anti-tamper (AT) operating mechanism.
Example HGV*8THL – GV series valve, factory fitted with “T” bar locking plate (THL).
Note: Padlocks for lockable handwheels and “T” bars are not supplied (hole size 6mm/0.24").
Hand Valves
Standard bonnet T bar handle locking Anti tamper spindle

ATHKEY/1

KITAT without key
Retro-fit kit part number KITATK with key
KITTHL Factory assembled suffix
Factory assembled suffix AT without key
THL ATK with key
Handwheel Lockable handwheel *Panel mounting

Retro-fit kit part number Retro-fit kit part number KITPM†
KITHW KITLHW Factory assembled suffix
Factory assembled suffix Factory assembled suffix PM
HW LHW † Panel mount kit for HP: KITPMHP
*Panel mounting hole diameter = 26mm (1.02").

Panel thickness = Max 5mm (0.20") Min 2.3mm (.09").

Hand Valves
Globe style bar stock needle valves HNV series (6,000 psig/414 barg)
Purpose
Bar stock needle valves are purpose designed valves for operation with any fluid up to 6,000 psig (414 barg)
rating. Complete with standard PTFE gland packing and self centering non rotational tip, gives the user assurance
of total in service sealing security. For gaseous application soft tipped optional seating is available. A wide variety
of end connectors are offered for all types of installation. NACE compliant materials and oxygen clean are also
available along with an extensive list of materials of construction.
Specification
• Standard seat diameter 4mm.
• Optional seat diameter 6mm.
• Cv: 0.35 standard.
• Maximum standard pressure up to 6,000
psig (414 barg).
Hand Valves
• Temperature rating -54C to +538C

(-65F to +1000F).
• Port sizes up to 1/2" pipe thread and
1/2"/12mm tube compression ends as
standard.
Optional sizes up to 1" pipe, tube and
combination ends can be considered.
Features
• Stainless steel construction as
standard.
• PTFE packing standard, optional
graphite.
• Alternative tip and materials of
construction available.
• Self centering non rotating spindle tip
for bubble tight shut off.
• Colour coded functional identification.
• Back stop spindle for blowout
prevention, and minimal atmospheric
leakage.
• Low torque operating T bar handle.
• Externally adjustable gland.
• Panel and base mount option.
• Variety of end connections including
integral compression one piece bodies.
• Angled versions available.
• Firesafe option available to API 607 BS
6755 Part 2.
• Dust cap to prevent ingress of
contamination to operating thread.
• Bonnet locking pin fitted as standard.
• Angled flow path (option).

Hand Valves
Part description
Item Description
1 Locked grub screw
2 T bar handle assembly
3 Dust cap/function label
4 Gland adjuster
5 Gland locknut
6 Valve bonnet
8 Thrust bush
9 Gland packing (2)
10 Sealing washer
11 Self centering spindle tip
12 Body
Hand Valves
Pressure
B - C 6000 psig (414 barg)
standard Graphite packing
6,000 B B - D PEEK tip
(414) C - E PCTFE tip
4,000
(275)
C
2,000
Standard product specification: metal/metal seated, (138)
PTFE packed, stainless steel, T bar operation, globe
pattern, 6000 psig (414 barg).
E D B C
0
Standard range part numbers Temperature
0 100 200 300 400 500 °C (°F)
Inlet Outlet Dimension (32) (212) (392) (572) (752) (932)
Part no.
Female Female A mm (inch) B mm (inch) C mm (inch)
HNV*4FF 1/4 NPT 1/4 NPT 54.0 (2.13") 28.6 (1.13") 79.4 (3.13") When selecting products for specific applications users
HNV*6FF 3/8 NPT 3/8 NPT 54.0 (2.13") 28.6 (1.13") 79.4 (3.13") should refer to our notice at the bottom of page 2.
HNV*8FF 1/2 NPT 1/2 NPT 63.5 (2.50") 28.6 (1.13") 79.4 (3.13")
Male Female
HNV*4M4F 1/4 NPT 1/4 NPT 57.8 (2.27") 28.6 (1.13") 79.4 (3.13")
HNV*8M8F 1/2 NPT 1/2 NPT 73.0 (2.87") 28.6 (1.13") 79.4 (3.13")
A-LOK® A-LOK®
HNV*4A 1/4 1/4 67.5 (2.66") 25.4 (1.00") 76.2 (3.00")
HNV*8A 1/2 1/2 76.2 (3.00") 25.4 (1.00") 76.2 (3.00")
HNV*M6A 6mm 6mm 67.5 (2.66") 25.4 (1.00") 76.2 (3.00")
HNV*M12A 12mm 12mm 76.2 (3.00") 25.4 (1.00") 76.2 (3.00")
*Insert material code
Notes for compression ended valves:-
1. For CPI™ change A to Z.
2. “A” dimension given for finger tight nuts and ferrules.
3. Can be offered to comply with latest issue of NACE subject to
para. 8.4.1.1.
4. For compression ended valve pressure ratings consult tube
ratings table.
Dimension “C” in open position.
Designed to meet pressure/temperature ratings of ANSI Class 2500 where applicable.

For a full list of options and suffix’s, see page 78. For a full list of materials and specifications, see page 79.

Hand Valves
Globe style bar stock needle valves HNV series (10,000 psig/689 barg)
Purpose
Bar stock needle valves are purpose designed valves for operation with any fluid up to 10,000 psig (689 barg)
rating. Complete with standard PTFE gland packing and self centering non rotational tip, gives the user assurance
of total in service sealing security. For gaseous application soft tipped optional seating is available. A wide variety
of end connectors are offered for all types of installation. NACE compliance and oxygen clean are also available
along with an extensive list of materials of construction.
Specification
• Standard seat diameter 4mm.
• Optional seat diameter 6mm.
• Maximum standard pressure up to
10,000 psig (689 barg).
Hand Valves

(-65F to +1000F).
1/2" MPI™ tube compression ends as
standard.
Optional sizes up to 1" pipe, tube and
combination ends can be considered.
Features
standard.
graphite.
prevention, and minimal atmospheric
leakage.
• Panel and base mount option.

Hand Valves
1 Part description
Item Description
2 1 Locked grub screw
3
4 4 Gland adjuster
7
5 Gland locknut
8 5 6 Valve bonnet
9 6 7 Anti blowout spindle

8 Thrust bush
10
9 Gland packing (2)
10 Sealing washer
12 Body
11
Hand Valves
Pressure
psig (barg)
12 10,000 A A - A Graphite packing

(689) A - B PTFE packing
MPI™ Advanced Features A - D PEEK tip/PTFE packing
8,000
(552)
6,000
(414)
4,000
(275)
2,000
1 (183)
2 3 4 5
D B A
1. Front ferrule with corrosion-resistant Parker SUPARCASE® forms 0
a tight pressure seal between the body and ferrule in a second 0 100 200 300 400 500 Temperature
strong mechanical hold on the tube. (32) (212) (392) (572) (752) (932) °C (°F)
2. Rear ferrule with corrosion-resistant Parker SUPARCASE®
provides a strong mechanical hold on the tube.
3. Longer thread area for improved resistance to pressure and load
on the ferrules.
4. Molybdenum disulfide-coated inverted nut helps prevent galling,
provides easier assembly, and permits multiple remakes.
5. Long tube-support area improves resistance to vibration and
line loads.
Standard product specification: metal/metal seated,
PTFE packed, stainless steel, T bar operation, globe
pattern, 10,000 psig (689 barg).
Standard range part numbers
Inlet Outlet Dimension
Part no.
C
HNV*4FFHP 1/4 NPT 1/4 NPT 60.5 (2.38") 31.8 (1.25") 82.6 (3.25")
HNV*8FFHP 1/2 NPT 1/2 NPT 69.9 (2.75") 31.8 (1.25") 82.6 (3.25")
MPI™ MPI™
HNV*4MPI 1/4 1/4 101.6 (4.00") 31.8 (1.25") 82.6 (3.25")
HNV*6MPI 3/8 3/8 113.6 (4.48") 31.8 (1.25") 82.6 (3.25")
*Insert material code
For MPI™ compression ended valve pressure ratings consult tube
catalogue CAT 4234 for wall thickness and assembly instructions. A B
MPI™ only available in stainless steel.

Hand Valves
H Series rising plug valves (HRPV series)*

Purpose
These unique, high quality, high performance, low torque rising plug soft-seated valves have been specifically
designed to perform with fluids containing high levels of contamination frequently found in oil and gas processing
facilities. With a straight through flow pattern and giving 100% repeatable bubble tight shut off, the valves as
standard when specified with PEEK seat will perform up to 10,000 psig (689 barg) with low spindle operating
torques. A variety of end connections are offered for all types of installation. NACE compliance is also available
along with an extensive list of materials of construction.
Specification
• Standard Orifice size 1/4" (6.4mm)
• Cv = 1.8.
• Maximum standard pressure up to
10,000 psig (689 barg) - PEEK seat.
• Temperature rating PEEK seat maximum
Hand Valves
200C.
• Port sizes up to 1/2" pipe thread as
standard.
Features
• 316 Stainless steel construction as
standard.
• PTFE packing standard.
• PEEK seat standard.
• Alternative body materials available.
• Straight through flow path.
• Standard multi port gauge style
available.
• Bi-directional flow.
• Replaceable soft seat.
• Backstop spindle for blowout
prevention and minimal atmospheric
leakage.
• Full range of head options available.
• Patent(s) pending.
• Other seating materials could be
considered for special applications.
* Patent(s) pending

Hand Valves
Part description
Item Description
1 Body
2 Seat
3 Joint seal
4 Packing
5 Thrust bush
6 Stem
7 Tip
8 Stem cap
9 Grub screw
10 Handle
11 Dust cap
12 Gland Adjuster
13 Lock nut
14 Bonnet
15 Pin
Hand Valves
16 Seat retainer
Pressure
psig (barg)
10,000 A
(689) A - A PEEK
8,000
(552)
6,000
(414)
4,000
(275)
2,000
(138)
A
Standard product specification: supplied in 316 stainless 0
steel with PEEK soft seat, PTFE packed, T bar operation, 0 100 200 300 400 500 Temperature
(32) (212) (392) (572) (752) (932) °C (°F)
10,000 psig (689 barg) maximum pressure rating, 200C
maximum temperature rating.
Standard range part numbers When selecting products for specific applications users
Connections Dimension should refer to our notice at the bottom of page 2.
Part no.
HRPV4S4FF 1/4 NPT 1/4 NPT 60.5 (2.38") 31.8 (1.25") 88.0 (3.46")
HRPV4S8FF 1/2 NPT 1/2 NPT 69.8 (2.75") 31.8 (1.25") 88.0 (3.46")
Male Female
HRPV4S8M8F 1/2 NPT 1/2 NPT 72.9 (2.87") 31.8 (1.25") 88.0 (3.46")
HRPVG4S8M8F 1/2 NPT 1/2 NPT x 3 96.5 (3.80") 31.8 (1.25") 88.0 (3.46")
A B

Hand Valves
Multi-port gauge valves (HGV series)

Purpose
Parker’s Multi-port gauge valves are purpose designed valves for operation up to 6,000 psig (414 barg) and
10,000 psig (689 barg). Complete with standard PTFE gland packing and self centering none rotational tip gives
the user assurance of bubble tight seat shut off. For gaseous application soft tipped optional seating is available.
A wide variety of connector ends are offered for all types of installations. NACE compliance and oxygen clean are
also available along with an extensive list of materials. Each valve has 3 female outlets giving the user optimum
selection for instrument positioning and location.
Specification
• Standard seat diameter 4mm (0.16").
psig (414 barg).
Hand Valves
• Maximum optional (HP) up to 10,000

psig (689 barg).
(-65F to +1000F).
• Port sizes up to 3/4" pipe thread as
standard.
Features
standard.
graphite.
leakage.
• Base mount option.
Bleed Valve Plug

Hand Valves
1 Part description
Item Description
1 Locked grub screw
2
3
4 4 Gland adjuster
7
5 Gland locknut
8 5 6 Valve bonnet
9 6
8 Thrust bush
10
9 Gland packing (2)
11
10 Sealing washer
12 Body
Hand Valves
Pressure
psig (barg) A - A Graphoil packing (optional high pressure)
10,000 A A - B PTFE packing (optional high pressure)
(689) B - B 6000 psig (414 barg) standard PTFE
12 packing
8,000 B - C 6000 psig (414 barg) standard Graphoil
(552) packing
B - D 6000 psig (414 barg) PEEK tip
6,000 B
A - D PEEK tip
(413)
C - E PCTFE tip
4,000
(275) C
A
2,000
(138)
Standard product specification: metal/metal seated, PTFE
packed, stainless steel, T bar operation, globe pattern, 6000 0
E D B C A
psig (414 barg). 0 100 200 300 400 500 Temperature
For complete supply of bleed valve and plug with the valve, (32) (212) (392) (572) (752) (932) °C (°F)
add suffix’s (see page 78).
Standard range part numbers should refer to our notice at the bottom of page 2.

Part no. Pressure rating
Male Female x 3 A mm (inch) B mm (inch) C mm (inch)
HGV*8 1/2 NPT 3 X 1/2" NPT 92.0 (3.62") 28.6 (1.13") 79.4 (3.13") 16,000 psi (414 bar)
HGV*12 3/4 NPT 3 X 1/2" NPT 95.0 (3.74") 28.6 (1.13") 79.4 (3.13") 16,000 psi (414 bar)
HGV*8HP 1/2 NPT 3 X 1/2" NPT 92.0 (3.62") 31.8 (1.25") 82.6 (3.25") 10,000 psi (689 bar)
*Insert material code - select from material matrix on page 79
To order individual bleed valves

(captive spindle) & plugs
Description Connection
Part no.
Male C
HBV*4M Bleed valve 1/4" NPT
4PHSS Hexagon plug 1/4" NPT
4PHHSS Hollow hexagon plug 1/4" NPT
Plug part numbers are from IPD’s pipe fitting range.
A B
Designed to meet pressure/temperature ratings of ANSI Class 2500/4500 where applicable.

Hand Valves
Single port gauge valves with vent (HVG series)

Purpose
Parker’s Single port gauge valves with vent are purpose designed valves for operation with any fluid up to 6,000
psig (414 barg) rating. Valves are provided with a single 1/4" NPT port for the optional fitting of captive bleed/vent
valve or blank plug. Complete with standard PTFE gland packing and self centering none rotational tip gives the
user assurance of total in service sealing security. For gaseous application soft tipped optional seating is available.
A wide variety of end connectors are offered for all types of installations. NACE compliance and oxygen clean are
also available along with an extensive list of materials of construction.
Specification
• Maximum std. pressure up to 6,000 psig
(414 barg).
Hand Valves
(-65F to +1000F).
1/2"/12mm tube compression ends.
Features
• Stainless steel construction standard.
graphite.
leakage.
• Firesafe option available to API 607 BS
6755 Part 2.
Bleed Valve Plug

Hand Valves
1 Part description
Item Description
1 Locked grub screw
2
3 3 Dust cap/function label
4 Gland adjuster
4
7
5 Gland locknut
8 5 6 Valve bonnet
9 6
8 Thrust bush
10
9 Gland packing (2)
11
10 Sealing washer
12 Body
Hand Valves
Pressure
B - C 6000 psig (414 barg)
12 standard Graphite packing
6,000 B B - D PEEK tip
(414) C - E PCTFE tip
4,000
(275)
C A
Standard product specification: metal/metal seated, 2,000
PTFE packed, stainless steel, T bar operation, globe (138)
pattern, 1/4" NPT vent/bleed port, 6,000 psig (414
barg). E D B C
Add suffix’s to obtain bleed valve or plug. 0
Temperature
0 100 200 300 400 500 °C (°F)
Standard range part numbers (32) (212) (392) (572) (752) (932)

Part no.
HNV*4FFV 1/4 NPT 1/4 NPT 63.5 (2.50") 28.6 (1.13") 79.4 (3.13")
HNV*6FFV 3/8 NPT 3/8 NPT 67.0 (2.64") 28.6 (1.13") 79.4 (3.13")
HNV*8FFV 1/2 NPT 1/2 NPT 75.0 (3.00") 28.6 (1.13") 79.4 (3.13")
Male Female
HNV*4M4FV 1/4 NPT 1/4 NPT 72.5 (2.85") 28.6 (1.13") 79.4 (3.13")
HNV*8M8FV 1/2 NPT 1/2 NPT 85.8 (3.38") 28.6 (1.13") 79.4 (3.13")
*Insert material code - select from material matrix on page 79.
To order individual bleed valves (captive C

spindle) & plugs
Description Connection
Part no.
Male
Plug part numbers are from IPD’s pipe fitting range. A B


Hand Valves
Outside screw and yoke globe pattern needle valves (HYNV series)
Purpose
Outside screw and yoke valves are designed for primary isolating applications operating up to 6,000 psig (414
barg) with optional 10,000 psig (689 barg) rating. The valve is supplied complete with standard graphite gland
packing and the self centering none rotational tip gives bubble tight sealing. For gaseous application soft tipped
optional seating is available. A wide variety of connector ends are offered for all types of installations including
multi-ported root/primary isolate service. NACE compliance and oxygen clean are also available along with an
extensive list of materials. Firesafe to BS 6755 Part 2 and API 607 standard with graphite packing.
Specification
psig (414 barg).
• Maximum optional pressure up to
Hand Valves
10,000 psig (689 barg).

(-65F to +1000F).
1/2"/12mm tube compression ends as
standard.
Features
• Stainless steel construction standard.
• Graphite packing standard, PTFE
optional.
prevention.
• Externally adjustable gland independent
of spindle thread.
• Firesafe design and verified by testing
to BS 6755 Part 2 and API 607.

Hand Valves
15 7 12 Part description
Item Description
14 4 1 Body
2 Thrust bush
13 11 3 Stem packing
4 Dust cap
15 5 Stem
10
6 Tip
2 7 Grub screw
9
8 Joint seal
3 9 OS&Y bonnet
8
10 Gland bridge
11 Gland adjuster
12 Tri-lobal handle
13 Bonnet - gland stud
14 Body - bonnet stud
Hand Valves
15 Nuts
5 1 6
Pressure
psig (barg)
A - A Graphite packing (optional high pressure)
10,000 A A - B PTFE packing (optional high pressure)
(689) B - B 6000 psig (414 barg) standard PTFE
packing
8,000 B - C 6000 psig (414 barg) standard Graphite
(552) packing
B - D PEEK tip
Standard product specification: metal/metal seated, 6,000 B
C - E PCTFE tip
(413)
Graphite packed, stainless steel, T bar operation, inline
pattern, 6000 psig (414 barg). 4,000
(275) C
Standard range part numbers 2,000
Inlet Outlet Dimension (138)
Part no.
Female Female A mm (inch) B mm (inch) C mm (inch) E D B C A
0
HYNV*4FF 1/4 NPT 1/4 NPT 68.2 (2.685") 38.1 (1.50") 98.9 (3.894")
0 100 200 300 400 500 Temperature
HYNV*6FF 3/8 NPT 3/8 NPT 69.2 (2.724") 38.1 (1.50") 98.9 (3.894") (32) (212) (392) (572) (752) (932) °C (°F)
HYNV*8FF 1/2 NPT 1/2 NPT 76.2 (3.000") 38.1 (1.50") 98.9 (3.894")
Male Female When selecting products for specific applications users
HYNV*4M4F 1/4 NPT 1/4 NPT 75.0 (2.953") 38.1 (1.50") 98.9 (3.894") should refer to our notice at the bottom of page 2.
HYNV*8M8F 1/2 NPT 1/2 NPT 82.0 (3.268") 38.1 (1.50") 98.9 (3.894")
HYGV*8 1/2 NPT 3 x 1/2 NPT 108.0 (4.252") 38.1 (1.50") 98.9 (3.894")
Socket weld Socket weld
HYNV*SW8NB 1/2 pipe 1/2 pipe 76.2 (3.000") 38.1 (1.50") 98.9 (3.894")
Butt weld Butt weld
HYNV*BW8NB 1/2 pipe 1/2 pipe 89.8 (3.535") 38.1 (1.50") 98.9 (3.894")
A-LOK® A-LOK®
HYNV*4A 1/4 1/4 87.4 (3.441") 38.1 (1.50") 98.9 (3.894") C
HYNV*8A 1/2 1/2 96.0 (3.780") 38.1 (1.50") 98.9 (3.894")
HYNV*M6A 6mm 6mm 87.4 (3.441") 38.1 (1.50") 98.9 (3.894")
HYNV*M12A 12mm 12mm 96.0 (3.780") 38.1 (1.50") 98.9 (3.894")
*Insert material code - select from material matrix on page 79.
Notes for compression ended valves:-
1. For CPI™ change A to Z.
2. “A” dimension given for finger tight nuts and ferrules. A B
B
3. Cannot be offered for NACE.
4. For compression ended valve pressure ratings consult tube ratings table.

Hand Valves
Instrumentation hand valves Valve types
Available options
Needle Needle Rising plug Multi-port Single port Outside Screw
Suffix adding
(HNV (HNV (HRPV (HGV (HVG & yoke

Part no.
sequence
Function Option Detail series) series) series) series) series) (HYNV series)
suffix
page 66 page 68 page 70 page 72 page 74 page 76
& 67 & 69 & 71 & 73 & 75 & 77
1 Gland packing Graphite 3 3 3 3 3 3

2 Seating PCTFE (207 barg/3000 psig) 9 3 3 3 3
PEEK PK 3 3 3 3 3 3
Stellite tip ST 3 3 3 3 3
Hand Valves
Regulating tip (4mm seat only) RT 3 3

6mm seat 6S 3 3
3 Plug/Bleed valve Blank plug P 3 3
(supplied loose Bleed valve BV 3 3
in box)
Plug & bleed valve PBV 3 3
4 Connection style Socket weld (* insert pipe size) SW*NB 3 3 3 3 3
Male socket weld (*insert pipe size) MSW*NB 3 3 3 3 3
Butt weld (* insert pipe size) (# insert schedule) BW*NBSCH# 3 3 3 3 3
Stub pipe extension (insert length in *mm) SP*MM 3 3 3 3 3
Male inlet extension (* insert length in mm) EX*MM 3 3 3 3 3 3
BSPT (* insert pipe size (e.g. 8K = 1/2") *K 3 3 3 3 3 3
BSPP (* insert pipe size (e.g. 4R = 1/4") *R 3 3 3 3 3 3
Flange (specify separately) FL 3 3 3 3 3
5 Connection sizing See below† 3 3 3 3 3
6 Flow pattern Angled ANG 3 3 3
Operating Lockable T bar THL 3 3 3 3 3 3
mechanism
Anti tamper T bar AT 3 3 3 3
Anti tamper + key ATK 3 3 3 3
Handwheel HW 3 3 3 3 3 3
Lockable handwheel LHW 3 3 3 3 3 3
7 Mounting Panel mount PM 3 3
Base mount BM 3 3 3 3 3 3
8 Condition NACE compliant materials** NC 3 3 3 3 3 3
Cleaned and lubricated for oxygen use OXY 3 3 3 3 3 3
Firesafe FS 3 3 3
Test certificates TC 3 3 3 3 3 3
Air testing PT 3 3 3 3 3 3
†For tube socket or tube butt weld use 1/16 inch denominations and change NB to TB.
†For metric tube size use actual metric (mm) dimensions e.g. SW12MMTB.
Note: Heat code traceable certificates for body and bonnet stud available on application.
**Does not apply for A-lok/CPI ended valves in 316 stainless steel.

Hand Valves
Instrumentation hand valves

Valve types
*Insert code Outside screw

Needle Needle Rising plug Multi-port Single port
for selected & yoke
Material (HNV series) (HNV series) (HRPV series) (HGV series) (HVG series)
material in (HYNV series)
page 66 & 67 page 68 & 69 page 70 & 71 page 72 & 73 page 74 & 75
part number page 76 & 77
Stainless steel std. S 3 3 *3 3 3 3

Monel M 3 3 3 3 3 3
Duplex D1 3 3 3 3 3 3
Super Duplex D2 3 3 3 3 3 3
Hand Valves
Hasteloy HC 3 3 3 3 3 3
Carbon Steel C 3 3 3 3 3
6Mo 6MO 3 3 3 3 3 3
Titanium T 3 3 3 3 3 3
Incoloy 825 825 3 3 3 3 3 3
Inconel 625 625 3 3 3 3 3 3
All non-wetted parts ie those not in contact with the process medium will be supplied in stainless steel for all materials shown above.
* For rising plug valve only in stainless steel use SS as material indicator.

Hi-Pro Ball Valve
for High
Performance
Process Isolation
Catalog 4190-HBV
December 2006
Hand Valves
Hi-Pro Ball Valve for up to 10,000 psi/689 bar operations
Product Description
These high performance two piece bi-directional Ball Valves offer the user full cold working pressure ratings up
to 10,000 psi (689 bar), giving 100% bubble tight shut off and continuous repeatable performance. The Ball Valves
are suitable for the most demanding applications in the oil, gas and process control industries.
By offering a true two piece design, body leakage paths are reduced to a minimum. With the added opportunity
to select integral compression ends the user can eliminate the use of taper threads and thread sealant. This avoids
system contamination, reduces leakage paths, installation costs, weight and space.
Specifications Features
• 316 Stainless steel construction. • Two piece body design - minimal leakage paths.
• Maximum cold working pressure rating • 4:1 Pressure boundary designed safety factor.
6,000 psi (414 bar) with P.T.F.E. seats.* • Designed to comply with requirements of
• Temperature rating PTFE seats ANSI/ASME B16.34 where applicable.
Hand Valves
-54˚C to +204˚C (-65˚F to +400˚F).* • Bi-directional.

• Maximum cold working pressure rating • PEEK and PTFE standard ball seat materials.
10,000 psi (689 bar) with PEEK seats.*
• PHflex seats available for 25mm bore.
• Temperature rating PEEK seats
-54˚C to +232˚C (-65˚F to +450˚F).* • PTFE and Graphoil gland packings.
*always refer to P/T graph • Bubble tight shutoff.

seats featuring inherent self relief.
taper threads and thread sealants.
• Anti static.
• Firesafe designed to meet API 607, BS6755 Pt2
(optional).

Hi-Pro Ball Valve for up to Class 4500 (10,000 psi/689 bar)
operations (10mm bore)
Standard range part numbers 10mm bore
Hand Valves
Part number Part number Inlet Outlet Dimensions
Class 2500 Class 4500 Female Female A mm (inch) B mm (inch)
HPBY*4FF HPBY*4FFHP 1/4” Female 1/4” Female 70.0 (2.76) 161.5 (6.36)
Male Female
HPBY*4M4F HPBY*4M4FHP 1/4” Male 1/4” Female 70.0 (2.76) 161.5 (6.36)
HPBY*8M8F HPBY*8M8FHP 1/2” Male 1/2” Female 85.0 (3.35) 166.5 (6.56)
A-LOK® A-LOK®
HPBY*4A — 1/4” A-LOK® 1/4” A-LOK® 95.0 (3.74) 165.5 (6.52)
HPBY*6A — 3/8” A-LOK® 3/8” A-LOK® 99.1 (3.90) 167.4 (6.59)
HPBY*8A — 1/2” A-LOK® 1/2” A-LOK® 104.7 (4.12) 170.2 (6.70)
HPBY*M6A — 6mm A-LOK® 6mm A-LOK® 95.0 (3.74) 165.5 (6.52)
*Insert material code - select from material matrix (B = Standard 316 Stainless Steel). For CPI™ change A to Z.
“A” dimensions given for finger tight nuts. For compression ended valve pressure ratings consult tube ratings table.
Combination ends are available.
Standard product specification: PTFE packing with PTFE seats, 10mm bore ball 6,000 psi (414 bar).
Standard product specification: PTFE packing with PEEK seats, 10mm bore ball 10,000 psi (689 bar).
Available options Part number
Suffix
Graphoil packing 3
Cold working pressures (psi/bar) in accordance with PEEK seats PK
ANSI/ASME B16.34 Secured end connector LC
Handle locking HL
Class Rating
Spanner actuation SA
Material *Insert 1500 2500 4500 Panel mounting PM
Fire safe design - Graphoil packing (std) FS
316 Stainless steel std B 3600/248 6000/414 10000/689 NACE compliant materials** NC
Alloy 400 D 5000/345 9000/620 Retro-fit handle locking kit (for site assembly) HPHLKIT
Duplex E 3600/248 6000/414 10000/689 PHlex seats PH
Super Duplex F 6000/414 10000/689 Base mounting holes (consult Parker) –
Hasteloy G 6000/414 10000/689 Note: Heat code Trace (HCT) material traceability certificates
6Mo K 6000/414 10000/689 available on request
Alloy 625 M 6000/414 10000/689 **Does not apply for A-lok/CPI ended valves in 316 stainless steel.

operations (15mm bore)
165.9 (6.53”)
41.0 (1.61”)
A/F HEX. 108.7 (4.28”)
50.8 (2.00”)
A/F HEX.
58.7 (2.31”)
A A/C HEX.
B
Hand Valves

Class 2500 Class 4500 Female Female A mm (inch) B mm (inch)
HPBX*8FF HPBX*8FFHP 1/2” Female 1/2” Female 97.2 (3.83) 207.9 (8.18)
Male Female
HPBX*8M8F HPBX*8M8FHP 1/2” Male 1/2” Female 102.9 (4.05) 213.6 (8.41)
A-LOK® A-LOK®
HPBX*10A — 5/8” A-LOK® 5/8” A-LOK® 118.0 (4.65) 212.6 (8.37)
HPBX*12A — 3/4” A-LOK® 3/4” A-LOK® 121.9 (4.80) 214.6 (8.45)
HPBX*M16A — 16mm A-LOK® 16mm A-LOK® 120.0 (4.72) 214.2 (8.43)
Hi-Pro Ball Valve 10mm and 15mm bore

10000

PEEK seat
6000

PTFE seat
2000
0
0 50 100 150 200 250
Temperature (°C)
Materials and options as per page 83

operations (20 & 25mm bore)
165.9 (6.53”) 20mm bore
204.7 (8.06”) 25mm bore
51.8 (2.04”) 20mm bore 115.6 (4.55”)

63.5 (2.50”) 25mm bore 20mm bore
139.3 (5.46”)
25mm bore
57.2 (2.25”)
20mm bore
76.2 (3.00”)
25mm bore
66.0 (2.60”)
20mm bore
A 88.0 (3.47”)
25mm bore
Hand Valves
Class 1500 Class 2500 NPT NPT A mm (inch) B mm (inch)
HPBW*12FFLP HPBW*12FF 3/4” Female 3/4” Female 89.8 (3.54) 204.1 (8.03)
HPBW*12M12FLP HPBW*12M12F 3/4” Male 3/4” Female 102.5 (4.04) 216.8 (8.53)
A-LOK® A-LOK®
HPBW*14ALP — 7/8” A-LOK® 7/8” A-LOK® 134.0 (5.28) 221.1 (8.71)
HPBW*16ALP — 1” A-LOK® 1” A-LOK® 137.6 (5.42) 222.9 (8.77)
HPBW*M22ALP — 22mm A-LOK® 22mm A-LOK® 133.3 (5.25) 220.8 (8.69)
HPBW*M25ALP — 25mm A-LOK® 25mm A-LOK® 137.1 (5.40) 222.7 (8.77)
Class 1500 Class 2500 NPT NPT A mm (inch) B mm (inch)
HPBV*16FFLP HPBV*16FF 1” Female 1” Female 128.4 (5.05) 260.3 (10.23)
HPBV*16M16FLP HPBV*16M16F 1” Male 1” Female 132.2 (5.20) 264.1 (10.40)
A-LOK® A-LOK®
HPBV*16ALP — 1” A-LOK® 1” A-LOK® 153.2 (6.03) 269.8 (10.62)
HPBV*M25ALP — 25mm A-LOK® 25mm A-LOK® 153.2 (6.03) 269.8 (10.62)
Standard product specification: PTFE packing with PTFE or PEEK seats, 25mm bore ball 3,600 psi (247 bar).
Standard product specification: PTFE packing with PHflex seats, 25mm bore ball 6,000 psi (414 bar).
Hi-Pro Ball Valve 20mm bore Hi-Pro Ball Valve 25mm bore
6000 6000
5000 5000
4000 PEEK seat 4000 Stainless Steel PHflex seat
PEEK seat
3000 3000
2000 PTFE seat 2000 PTFE seat
1000 1000
0 0
0 50 100 150 200 250 0 50 100 150 200 250

Hi-Pro Multi Port Gauge Valve for up to Class 4500 (10,000
psi/689 bar) operations (10mm bore)
A
Hand Valves
Standard Product Specifications

Part No. HPBYGVB8: 316 Stainless Steel construction, PTFE packing, PTFE seats, 10mm bore ball, 6,000 psi
(414 bar), 1/2” NPT male inlet x 3 – 1/2” NPT female outlets.
Part No. HPBYGVB12: 316 Stainless Steel construction, PTFE packing, PTFE seats, 10mm bore ball, 6,000 psi
(414 bar), 3/4” NPT male inlet x 3 – 1/2” NPT female outlets.
Part No. HPBYGVB8HP: 316 Stainless Steel construction, PTFE packing, PEEK seats, 10mm bore ball,
10,000 psi (689 bar), 1/2” NPT male inlet x 3 – 1/2” NPT female outlets.
Part No. HPBYGVB12HP: 316 Stainless Steel construction, PTFE packing, PEEK seats, 10mm bore ball,
10,000 psi (689 bar), 3/4” NPT male inlet x 3 – 1/2” NPT female outlets.
Note: To obtain optional bleed valve and/or blank plug with the gauge valve the above part number must be
suffixed accordingly. If these parts are required they will be shipped loose in the box for customer assembly using
their preferred thread sealant.

6000 psi (414 bar) 10000 psi (689 bar) Male Female A mm (inch) B mm (inch)
HPBYGV*8 HPBYGV*8HP 1/2” NPT 3x1/2” NPT 116.5 (4.59) 188.1 (7.41)
HPBYGV*12 HPBYGV*12HP 3/4” NPT 3x1/2” NPT 119.5 (4.71) 191.1 (7.52)
*Insert material code - select from material matrix (B = Standard 316 Stainless Steel).
Bleed valve Plug

Hi-Pro Ball Options for up to Class 4500 (10,000 psi/689 bar)
operations
Part description
Item Description
1 End Connector
2 E-seal™
3 Sealing washer
4 Seats
5 Body
6 Ball
7 Anti blowout stem
8 Thrust Seal
9 Gland packing
10 Upper gland packing
Hand Valves
11 Thrust bush
12 Stop pin
13 Thrust bush
14 Lock nut
15 Locking dome nut
16 Handle
17 Handle grip
Secured end connector

Handle locking (double pin)
(padlock not supplied)
Panel mounting
Spanner actuation (c/w nuts & bolts)

‘H’ Series
Two Valve
Manifolds
Catalog 4190-PM
August 2006
Manifolds
2 Valve
'H' Series Two Valve manifolds
Contents
Page 92/93 Valve assembly details
Page 94/95 Remote mount static pressure manifolds
Page 96/97 High pressure remote manifolds

Manifolds
2 Valve
Page 98/99 Direct mount static pressure manifolds
Page 100/101 Single and double flanged outlet manifolds
Page 102 Miniature static pressure manifolds
Page 103 PTFree connections
Page 104/105 Mounting brackets
valv HSDL
H
Two HL*2
ies
Ser s HL*2
8M8F
4F
HD*2
o p tion p
l *2V DBB
teria HL HL*3 6
Ma
Page 106/107 Materials VTF
HL*2 6
page
page
3
3
2V
ert co
de HAL* 6 3 3
*Ins selected page
3 3
for erial in r
mat numbe 3 3 3
part 3 3 3
n ✓ ✓
Optio 3
✓
✓ ✓
9
✓ ✓
PK
✓ ✓
RP
✓
ST
tion ✓ ✓
P
Func hoil cked
✓
BV B
Grap E FE pa SW*N B
✓
PCTF le PT
lve sty BW*N
PEEK plug va ✓
Page 108/109 Spares kits and options d pa

Glan ing
Seat
ckin
g
Note
1
box)
Rising tip
ite 4 NP
Stell plug 1/ 4 NPT
T
Blank valve 1/ insert size)

Bleed et weld
(*
pipe
e
size)
ert pip ooves 2")

= 1/ )
DIN†
*K
*R
SSB 0
CSB1 0 ✓
2 se in Sock weld (* insaling gr (e.g. 8K = 1/2" B1
d loo
✓
e SS
pplie Note 2
2 Butt 213 se pipe siz (e.g. 8R
lve (su 19 e FFD P
d va Note 3 DIN (*insert pipe siz
CSBC
Plug/
Blee lting Note BSPT (*insert g bolts g bolts
**SG ✓
d bo ✓
lts
3 n an BSPP . Mountin Mountin ting bo
Conn
ectio
Note
4 St. St x 1.5 CS St. Moun T
NP NPT) THL ✓
0 t d N=

'H' Series Two valve manifolds
Introduction
With many years of manifold development and manufacture Parker Hannifin are able to offer the most comprehensive
range of two valve block and bleed manifolds to suit all types of instrumentation installations, specifications and
applications.
Now consolidated into one catalogue, selection can be made from a comprehensive range of bodies with a variety
of connections and valve positions, optimising installation and access opportunities.
Designed to reduce installation costs and improve safety performance, the consolidation of valves into one unit
provides you with a combination of
instrument isolation together with bleed/vent
and test facilities.
In addition to manufacturing manifolds
Parker also produce a comprehensive range
of single and twin ferrule high integrity tube
fittings. Manufactured in a variety of materials
these products are used extensively in the oil,
gas, petro-chem, power, processing and
many other markets.
By integrating these products, instrument
manifolds and tube fittings, Parker can offer
Manifolds
unique connection combinations which are
2 Valve
specifically designed to eliminate site
assembled threaded connectors, ingress of
debris and contamination from thread sealant
materials which often result in instrument
failure, replacement and downtime.
Eliminating the use of taper threads, factory
assembled and tested connections will
ensure improved performance through
simpler assembly and installation
procedures. This system provides total
flexibility of tubing position with positive leak
proof connections.
time to time necessitate changes in the
details contained in this catalogue. Parker
Hannifin reserve the right to make such changes at their discretion and without prior notification.


1. Positive handle retention design featuring For safe reliable and
repeatable performance 3. Dust Cap
broached square engagement positioned by This has a dual purpose, preventing air born
2. "T" bar functional identification. Isolate (BLUE)
Ergonomically designed for ease of operation. Bleed/test (RED).
Anti-tamper and lockable devices can be
supplied for on site retro-fit. 5. Gland adjuster lock nut
A secure anti vibration locking mechanism to
4. Gland packing adjuster prevent inadvertent gland adjuster loosening.
For maximum packing stability and performance,
simple and easily adjustable for gland wear 7. Anti blowout spindle
compensation. Designed for low torque operation with high
quality micro mirror stem finish for positive
6. Valve Bonnet gland sealing.
Standard construction for maximum pressure
rating with replaceable bonnet sealing washer 9. Gland packing (adjustable)
arrangement. Chevron effect dual piece gland packing to
provide maximum sealing area contact with
8. Thrust Bush minimum gland adjustment.
Anti rotational adjustor bush ensures uniform
packing compression, maximising pressure tight 11. Spindle tip
sealing and limiting cold flow passages. Self centering, non-rotational tip gives
successive positive bubble tight shut off
10. Bonnet/body washer assuring the user of leakage free performance
Annealed sealing washer to ensure complete and downstream functional safety.
fit of bonnets with 100% re-sealing assurance
Manifolds
2 Valve
• Height closed (standard and HP) = 47mm (1.85"). • Standard unit throughout manifold range.
Height open (standard and HP) = 50.3mm (2.00"). • Operating threads outside washout area.
• Maximum standard pressure up to 6,000 psig (414 • Low operating torque.
• Maximum optional pressure (limited to HP suffix see • Retro-fit kit for:-
pages 96/97) up to 10,000 psig (689 barg). Anti-tamper spindle.
• Maximum temperature PTFE 260C (500F). Lockable T bar.
Pressure vs Temperature fitted as standard.
Pressure
psi (bar) A - A Graphoil packing • Alternative graphoil packing for high temperature
10,000 A A - B PTFE packing performance available.
(690) B - B 6000psi (414 bar) standard
PTFE packing • Alternative self centering tip materials available for
8,000 B - C 6000 psi (414 bar) gaseous and aggressive fluids.
(552) standard Graphoil packing
A - D PEEK tip • Safety back seated spindle prevents stem blowout
6,000 B C - E PCTFE tip and provides secondary back up stem seal.
(413)
4,000
(275) C washout.
2,000
(138) • NACE certified wetted parts available.
0
Oxygen service.
0 100 200 300 400 500 Temperature

Optional manifold globe style bonnet design

The design options below can be simply retrofit to any "H" series standard manifold. Retrofit kit part numbers are listed
next to the illustrated option and all parts will be supplied in stainless steel regardless of the parent body material.
To obtain factory assembled options the manifold part number must be suffixed with the option and function
designator. This allows you to select one or both of the bonnets to be fitted with the selected option or, different
options to be fitted to either of the bonnets.
Function designator IS – isolate DR-drain/test.
Example HL*2VATDR – manifold with drain/bleed valve (DR) fitted with anti-tamper (AT). Isolate valve will be
standard bonnet design.
Example HL*2VHWISTHLDR – manifold with isolate valve fitted with hand-wheel and drain/bleed valve fitted
with "T" bar locking mechanism.
Note: Padlocks for lockable handwheels and "T" bars are not supplied (hole size 6mm/0.24").
Manifolds
2 Valve
ATHKEY/1

KITAT without key
THL ATK with key
Retro-fit kit part number Retro-fit kit part number Retro-fit kit part number
KITHW KITLHW KITPM
Factory assembled suffix Factory assembled suffix Factory assembled suffix
HW LHW PM
*Panel mounting hole diameter = 26mm (1.02").

Panel thickness = Max 5mm (0.20") Min 2.3mm (.09").

Remote mount static pressure manifolds

Purpose
This series of two-valve manifolds combine valves into one unitised block to perform isolation, bleed and calibration
of pressure transmitters, gauges and switches. Process, instrument and vent connections can be provided in a
variety of sizes and thread forms including NPT, BSPTr and BSPP.
HL*2VTF HL*2V HL*2HVSDLH

Manifolds
Instrument
2 Valve
Test/Drain Process
Line diagram represents

HAL*2V HL*28M8F4F
this group of manifolds
Instrument double block and bleed manifolds

Double block and bleed instrument manifolds for dual isolating and bleed purposes. Ideal for limited space and
panel installations.
Instrument Instrument
p
t
Test/drain Process Drain Process
HL*3DBB HL*3DBB1
*For material codes see pages 106/107. For options see pages 108/109.

Remote mount static pressure manifolds
69.8
63.5
(2.75")
85.0
85.0
(2.50") (3.35")
50.8
50.8 28.6
31.8
(2.00")
(2.00") (1.25")
(1.13") 50.8 28.6
50.8 28.6
(2.00") (1.13")
152.4 79.4
152.4
(6.00")
HL*2V (3.13")
78.8 HL*2VTF
(6.00")
69.8
63.5 73.0
73.0
(2.75")
(2.50") (2.88")
(2.88")
50.8
63.5 28.6 50.8
50.8 28.6
28.6
(2.00") (1.13")
(2.50")
(2.00") (1.13") (2.00") (1.13")
79.4 152.4
152.4
100.5
114.3
(6.00")
(4.50")
(3.96") (3.13") (6.00")
HAL*2V HL*28M8F4F
63.5
Manifolds
63.5
2 Valve
(2.50")
(2.50") 101.6
(4.00")
50.8
(2.00")
50.8
50.8 28.6
28.6
(2.00")
(2.00") (1.13")
(1.13") 88.9
101.6
101.6 79.4
79.4
(3.50") 28.6
(4.00")
(4.00") (3.13")
(3.13") (1.13")
148.3
HL*2HVSDLH (5.84") HL*3DBB HL*3DBB1
*Overall width with valves fully open

Standard product specification: self centering Specification
metal/metal seat, PTFE packed, stainless steel, • Maximum standard pressure up to 6,000 psig (414
T bar handle operation, 6000 psig (414 barg). barg), to ANSI Class 2500.
• Temperature rating - see page 92.
• Standard port sizes up to 1/2" NPT.
Standard connections
Part No. Inlet (NPT) Outlet (NPT) Bleed/test (NPT)
HL*2V 1/2" female 1/2" female 1/4" female
HAL*2V 1/2" female 1/2" female 1/4" female
HL*2HVSDLH 1/2" female 1/2" female 1/4" female Features
HL*2VTF 1/2" female 1/2" female 1/4" female
• Standard high performance bonnet design.
HL*28M8F4F 1/2" male 1/2" female 1/4" female
HL*3DBB 1/2" female 1/2" female 1/4" female
• Colour coded valve function identification.
HL*3DBB1 1/2" female 1/2" female 1/4" female • Alternative materials of construction available.
*Insert material designator, see pages 106/107 • Optional port sizes and thread forms available:
BSPTr, BSPP.
• Socket and butt weld connections available.
• PTFree connections available (see page 103).
• Blank and bleed plugs available.
• NACE certified on request.
Function • Optional cleaned and lubricated suitable for
Blue cap – isolate, Oxygen service.
Red Cap – drain/bleed • Heat code traceable body and bonnet.

High pressure 10,000 psig (689 barg) two valve manifolds

Purpose
This series of manifolds have been designed for more aggressive applications and for operation up to 10,000 psig
(689 barg).
Test/Drain Process

this group of products
HL*2VHP HAL*2VHP
Manifolds
2 Valve
HL*28M8F4FHP
Instrument double block and bleed manifolds

Designed for dual isolating and bleed purposes, ideal for limited space and panel installations.
p
t
Test/drain Process Test/Drain Process
HL*S3DBBHP HL*3DBB1HP
*For material codes see pages106/107. For options see pages 108/109.

High pressure 10,000 psig (689 barg) two valve manifolds
69.8
69.8 69.8
69.8
(2.75") (2.75")
(2.75")
(2.75")
50.8 31.8 63.5

63.5 31.8
31.8
50.8 31.8
(2.00")
(2.00") (1.25")
(1.25") (2.50")
(2.50") (1.25")
(1.25")
152.4
152.4
114.3
114.3
(6.00") (4.50")
(4.50")
(6.00")
HL*2VHP HAL*2VHP
76.2
76.2
107.7
107.7
(4.25")
(4.25")
(3.00")
(3.00")
57.2
57.2
(2.25")
(2.25")
Manifolds
2 Valve
50.8
50.8 31.8
31.8
(2.00")
(2.00") (1.25")
(1.25")
88.9
88.9 31.8
31.8
152.4
152.4 (3.50")
(3.50") (1.25")
(1.25")
(6.00")
(6.00")
148.6
148.6
(5.85")
(5.85")
HL*8M8F4FHP HL*3DBBHP HL*3DBB1HP
*Overall width with valves fully open Specification

Standard product specification: self centering • Maximum standard pressure up to 10,000 psig (689
metal/metal seat, PTFE packed, stainless steel, barg), to ANSI Class 4500 (St. St.).
T bar handle operation, 10,000 psig (689 barg). • Temperature rating - see page 92.

Part No. Inlet (NPT) Outlet (NPT) Bleed/test (NPT)
Features
HL*2VHP 1/2" female 1/2" female 1/4" female • Standard high performance bonnet design.
HAL*2VHP 1/2" female 1/2" female 1/4" female • Colour coded valve function identification.
HL*28M8F4FHP 1/2" male 1/2" female 1/4" female • Alternative materials of construction available.
HL*3DBBHP 1/2" female 1/2" female 1/4" female • Optional port sizes and thread forms available:
HL*3DBB1HP 1/2" female 1/2" female 1/4" female BSPTr, BSPP.
*Insert material designator, see pages 106/107 • Socket and butt weld connections available.
Function • Optional cleaned and lubricated suitable for
Blue cap – isolate, Oxygen service.
Red Cap – drain/bleed • Heat code traceable body and bonnet.

Direct mount static pressure manifolds

Purpose
This series of two valve manifolds is designed for direct mounting to process measurement pressure transmitters.
Standard functions include isolation, test, bleed and calibration.
HD*2EXT HD*2HLHFF
Base entry enclosure mountable Straight through bolted flange
Manifolds
2 Valve
Instrument
Test/drain Process

this group of products
HEF*2LH HD*2HLH
HEF*2LH8N HD*2HLHCP
For Model 3051 transmitter
*For material codes see pages 106/107. For options see pages 108/109.

Direct mount static pressure manifolds
107.6
107.6
(4.24")
145.5
145.5 (4.24")
(5.73")
114.3
114.3
(5.73") 63.5
63.5
(4.00")
(4.50") (2.50")
(2.50")
63.5
63.5 28.6
28.6
(2.50") (1.13")
(2.50") (1.13")
63.5
63.5 38.1
38.1
114.3
114.3
(4.50")
(2.50")
(2.50") (1.50")
(1.50") (4.50")
114.3
HD*2EXT 114.3
(4.50")
(4.50") HD*2HLHFF
62.0
62.0
(2.44)
(2.44")
107.6
107.6
96.4
96.4 (4.24")
(4.24")
(3.80")
(3.80")
63.5
63.5
(2.50")
(2.50")
98.5
98.5
63.5
63.5
(3.88") 31.8
31.8
28.6
28.6
(3.88") (2.50")
(2.50")
(1.13")
(1.25")
(1.25") (1.13")
149.3
149.3
114.3
114.3
(5.88)
(5.88") 95.8
95.8
(4.50")
(4.50")
(3.18")
(3.18")
HEF*2LH HD*2HLH
62.0
62.0
(2.44)
(2.44")
Manifolds
2 Valve
107.6
107.6
(4.24")
101.6
101.6 (4.24")
(4.00")
(4.00") 63.5
63.5
(2.50")
(2.50")
98.5
98.5 31.8
31.8
110.0
110.0 28.6
28.6
(4.33") (1.13")
(3.88")
(1.50") (1.25")
(1.25") (4.33") (1.13")
160.8
160.8
149.3
149.3 80.7
80.7 (6.33")
(6.33")
(5.88)
(5.88") (3.18")
(3.18")
HEF*2LH8N HD*2HLHCP
Overall width with valves fully open
Standard specification: self centering metal/metal seat, PTFE packed, stainless steel, T bar handle operation,
6000 psig (414 barg). Supplied as standard with 1 off PTFE instrument seal and appropriate 7/16" UNF high
tensile zinc plated carbon steel bolts.
Standard range part numbers Specification
Standard connections • Maximum standard pressure up to 6,000 psig (414
Part No. Inlet (NPT) Outlet Drain/bleed barg), to ANSI Class 2500.
HD*2EXT 1/2" female Flanged 1/4" female • Temperature rating - see page 92.
HEF*2LH Flanged Flanged 1/4" female • Standard port sizes up to 1/2" NPT.
HEF*2LH8N 1/2" female Flanged 1/4" female
HD*2HLHFF Flanged Flanged 1/4" female
Features
HD*2HLH 1/2" female Flanged 1/4" female • Standard high performance bonnet design.
HD*2HLHCP 1/2" female Flanged 1/4" female • Colour coded valve function identification.
*Insert material designator • Alternative materials of construction available.
Function • Optional port sizes and thread forms available:
Blue cap – isolate, BSPTr, BSPP.
Red Cap – drain/bleed • Socket and butt weld connections available.
All manifolds are drilled suitable for bracket mounting • PTFree connections available (see page 103).
- standard manifold support brackets are available. • Blank and bleed plugs available.
Straight through flow pattern rising plug valves are • NACE certified on request.
available for HEF*2LH and HEF*2LH8N. • Optional cleaned and lubricated suitable for
*For material codes see pages 106/107. For options Oxygen service.
see pages 108/109. • Heat code traceable body and bonnet.

Flanged connected static pressure manifolds

Purpose
These manifolds are designed for fast and efficient installation and removal of pressure measurement instruments.
Single kidney flange arrangements are provided with optional inlet connections for total installation flexibility, the
redundant connection can also be used for purge operations.
The dual flanged model enables users to mount two pressure measuring devices connected to a common inlet,
redundant cross-hole connections can be used for process purging.
Kidney flange connections can also be provided with male threaded outlet, A-LOK, CPI or PTFree connections.
Closing the isolation valves and operating the bleed valve gives operators the opportunity of venting trapped
pressurised fluids to an environmentally safe area. Further access through the bleed connection enables in-situ
instrument calibration.
Instrument
Manifolds
2 Valve
Test/drain Process
HL*2V1KFMB
Drain/bleed Drain/bleed
Process
HL*2V2KFMB
All manifolds are drilled suitable for bracket mounting - standard manifold support brackets are available.
*For material codes see page 106/107. For options see pages 108/109.

Standard dimensions
100.0
100.0
(3.94")
(3.94")
63.5
63.5
(2.50")
(2.50")
100.0
100.0 28.6
28.6
(3.94")
(3.94") (1.13")
(1.13")
142.4
142.4 79.4
79.4
(5.61") (3.13")
L*2V1KFMB (5.61") (3.13")
105.7
105.7
(4.16")
(4.16")
100.0
100.0
Manifolds
(3.94")
(3.94")
2 Valve
63.5
63.5
(2.50")
(2.50")
168.0
168.0 28.6
28.6
(6.61")
(6.61") (1.13")
(1.13")
253.8 79.4
79.4
253.8
L*2V2KFMB (9.99")
(9.99")
(3.13")
(3.13")
Overall width with valves fully open
Standard product specification: self centering Specification

metal/metal seat, PTFE packed, stainless steel • Maximum standard pressure up to 6,000 psig (414
construction, T bar handle operation, 6000 psig (414 barg), to ANSI Class 2500.
barg). Bleed valves fitted with Fluorocarbon Rubber • Temperature rating -40C to +204C (-40F to +400F)
gland seals.

Features
Part No. Inlet (NPT) Outlet (NPT) Bleed/test (NPT) • Standard high performance bonnet design.
L*2V1KFMB 2 x 1/2" female 1 x Flanged x 1/2" female 1/4" female • Colour coded valve function identification.
L*2V2KFMB 1/2" female 2 x Flanged x 1/2" female 1/4" female • Alternative materials of construction available.
*Insert material designator • Optional port sizes and thread forms available:
BSPTr, BSPP.
Function • Socket and butt weld connections available.
Blue cap – isolate, • PTFree connections available (see page 103).
Red Cap – drain/bleed • Blank and bleed plugs available.
• Optional cleaned and lubricated suitable for
Oxygen service.
*For material codes see pages 106/107. For option • Heat code traceable body and bonnet.
codes see pages 108/109. • Mini bleed valves for compact installation.

Miniature static pressure manifolds

Purpose
These manifolds are ideal for installation inside control panels or any size limited construction. They provide size, weight
and cost savings whilst at the same time meeting industry standard pressure rating performance of 6,000psig (414
barg).
Technical specification,
psi
(bar) 32.0mm (1.25")
6000
(414)
5000
(345)
Pressure
4000 28.2mm (1.11") open
(276) 25.4mm (1.00") closed
3000
(207)
2000
(138)
1000
(69)
50° 100° 150° 200° 250°

(122°) (212°) (302°) (392°) (482°)
Temperature °C (°F)
MLS2VTF4N
Specification
Manifolds
2 Valve
• Maximum pressure: 414 bar (6000 psi)

• Maximum temperature: 204° C (400° F)
• Packing seal ring Fluorocarbon Rubber
• Back up ring P.T.F.E.
C
• Material of construction Stainless steel

Vent Inlet
A B • Seat construction Metal/metal
Dimensions mm (inch)
Part Number Inlet Outlet Drain/vent A B C

MLS2VTF4N 1/4" NPT female 1/4" NPT female 1/4" NPT female 50.8mm (2.0") 38.1mm (1.5") 27.0mm (1.08")
MLS2VTF 1/2" NPT female 1/2" NPT female 1/4" NPT female 50.8mm (2.0") 50.8mm (2.0") 27.0mm (1.08")
Easy to install, easy to operate and easy on the budget

Parker's range of miniature valves and manifolds are ideal for installation inside control panels and other size
limited installations where space and weight are primary considerations.
Performance
Working with any fluids this valve will provide bubble tight shut off. To avoid seat damage, applications should be
provided with upstream filtering to remove any particle contamination.
The valve is designed with an anti-blow out proof stem and a metallic back seat to minimise atmospheric leakage
in the event of stem seal failure. To reduce sealing ring wear, an anti extrusion P.T.F.E. back up ring is fitted as a
standard.

PTFree connect™
Manifold connections
Many users continually desire the elimination of taper threads and their associated sealant.
The PTFree connect system enables users to assemble tube lines to any of the manifold ports without the need for
PTFE tape or other liquid sealant.
The PTFree connection can be applied to any of the manifold featured in this catalogue. these will be factory fitted, pin
locked and pressure tested.
PTFree connect enables angled tube connections to be swivelled until the optimum tube alignment position has been
achieved. Assembly to the tube connector is achieved by tightening the standpipe nut one-quarter turn from the finger
tight position.
Manifolds can also be supplied with male connectors using the same thread form as the PTFree connect. They can be
provided factory fitted, pin locked and tested before they leave our manufacturing plant.
Some size restrictions may be necessary due to the close proximity of some connections and the across flat hexagon
dimensions, as a guide PTFree connect for inlet and outlet can be up to 1/2" or 12mm o/d., drain/bleed connections
should be restricted to 1/4" or 6mm. For PTFree male connectors inlet and outlet should be restricted to 3/8" or 10mm
and 1/4" or 6mm o/d for drain/bleed.
Manifolds
2 Valve
AA AA
A = 29.70mm (1.17") 6mm/1/4" tube A = 31.50mm (1.25") 6mm/1/4" tube

A = 35.00mm (1.38") 10mm tube A = 36.60mm (1.44") 10mm tube
A = 35.00mm (1.38") 3/8" tube A = 36.60mm (1.44") 3/8" tube
PTFree connect PTFree male connectors

(Code FRC) (Code FRCM)
Part Number Construction Examples
Inlet, Outlet, Drain/vent/test, tube size/thread size & form
Manifold Connection Style A-LOK(L) or Metric or inch
Inlet (E) + size Outlet (X) + size Drain/vent/test
Part No. + option FRC or FRCM CPI(B) L or B tube M or I
HLS2V FRC L M E12 X12 D6
Part No. HLS2VFRCLME12X12D6 = 2 valve manifold with all A-LOK PTFree connect™ Inlet 12mm, Outlet 12mm
Drain/vent/test 6mm. Stainless steel standard construction
HALS2V FRCM B I E6 X6 D4N
Part No. HALS2VFRCMBIE6X6D6N = 2 valve manifold with CPI PTFree male connector Inlet 3/8 o.d, Outlet 3/8 o/d
Drain/vent/test 1/4" NPT. Stainless steel standard construction

Manifold bracket support

Purpose
It is essential to fully support impulse/pressure measurement tubing lines, manifolds and instruments. All Parker
manifolds are designed to accommodate bracket mounting and support, a full range of brackets with additional
U bolts are available.
Brackets are designed for panel and wall mounting and give full clearance for ease of handle operation. They are
also suitable for vertical and horizontal positioning on 2” pipe-stand.
Standard brackets are produced from 4mm thick carbon steel plate to provide maximum rigidity and support. For
full corrosion protection the brackets are shot blasted and zinc sprayed.
Alternative bracket material is available upon request.
Part No. BKT1CS Simple to install bracket for horizontal/vertical 2” stanpipe, wall, panel or base
mounting, bracket stand-off prevents handle obstruction.
Suitable for: -
HL*2V
HL*28M8F4F
HAL*2V
HL*2HVSDLH 30.0
24.0
(Not suitable for HP (1.18")
(0.94")
versions)
For ‘U’ bolts suffix

47.0
47.0
part no. with B.
Manifolds
(1.85")
(1.85") 2-Off Ø10.0
2 Valve
2-OFF ÿ10.0 (0.41")

Example BKT1CSB (0.41")
MTG. HOLES
Mtg. holes
69.5
71.0
(2.74")
(2.80")
90.0
90.0
(3.54")
(3.54")
For manifold/bracket bolts add ‘bolt set’ suffix from matrix.

Example: Bracket, ‘U’ bolt and manifold/bracket bolts BKT1CSB1 (suitable for H*L2V).
Part No. BKT2CS Universal manifold mounting bracket suitable for all remote mount manifolds.
This bracket allows 90 degree positioning enabling total installation flexibility
Suitable for the above and prevents handle obstruction
manifolds and: -
HL*2VTF
HL*3DBB 30.0
24.0
(0.94")
(1.18")
HL*3DBB1
HAL*2VHP
Suitable for all HP versions
For ‘U’ bolts suffix part no.

with B 4-Off Ø8.5
90.0
90.0 69.5
71.0 (0.34")
Example BKT2CSB (2.80")
(3.54") (2.74")
(3.54") Mtg. holes
69.5
71.0
(2.80")
(2.74")
90.0
90.0
(3.54")
(3.54")
For manifold/bracket bolts add bolt set suffix from matrix.

Example: Bracket, ‘U’ bolt and manifold/bracket bolts BKT2CSB2 (suitable for HL*3DBB).


Part No. BKT3CS Universal manifold mounting bracket suitable for all direct mount manifolds. This
Suitable for: - bracket design enables horizontal or vertical instrument positioning.
HD*2HLH
35.0
35.0
HD*2HLHCP (1.38")
(1.38")
HD*2HLHFF
For ‘U’ bolts suffix part no.
with B
Example BKT3CSB
69.5
71.0
(2.80") 145.0
145.0
For manifold/bracket bolts (2.74") (5.71")
(5.71")
add bolt set suffix from
matrix.
Example: Bracket, ‘U’ bolt
and manifold/bracket bolts
BKT3CSB3 (suitable for 69.5 10.0
10.0
71.0
HD*2HLH). (2.74")
(2.80") 4-Off Ø8.5 (0.39")
(0.39")
90.0
90.0
(0.34")
(3.54")
(3.54") Mtg. holes
Part No. BKT4CS For extruded style manifold blocks providing full base support for horizontal or
Suitable for: - vertical fixing to 2” pipestand.
Manifolds
2 Valve
HEF*2LH8N
HEF*2LH 67.0
(2.64")
67.0
67.0
(2.64")
(2.64")
For ‘U’ bolt suffix part no.
with B
Example BKT4CSB
For manifold/bracket bolts

add bolt set suffix from 120.0
120.0
69.5 (4.72")
(4.72")
matrix. 71.0
(2.74")
(2.80")
Example: Bracket, ‘U’ bolt

and manifold/bracket bolts
BKT4CSB4 (suitable for 69.5
71.0 4-Off Ø8.5
HEF*2LH). (2.74")
(2.80")
90.0
(0.34")
90.0
(3.54")
Mtg. holes
(3.54")
‘U’ Bolt with nuts & washers Manifold/bracket bolts

for 2" NB standpipe c/w nuts and washers.
Manifold Part No. Bolt Set Part No. Suffix
HL*2V M5 x 45 Bolt BS1 1
Part No. UBACS HAL*2V M5 x 45 Bolt BS1 1
HL*28M8F4F M5 x 45 Bolt BS1 1
HL*2HVSDLH M5 x 45 Bolt BS1 1
HL*2VTF M5 x 45 Bolt BS1 1
HL*3DBB M10 x 14 Bolt BS2 2
HL*3DBB1 M10 x 14 Bolt BS2 2
M6 x 14 Bolt (1-OFF)
85mm
A HD*2HLH BS3 3
HD*2HLHFF BS3 3
HD*2HLHCP M10 x 14 Bolt (2-OFF) BS2 2
HEFS2LH M6 x 45 Bolt BS4 4
Carbon steel standard HEFS2LH8N M6 x 45 Bolt BS4 4
All nut and bolt sets are standard in Carbon Steel

Material options Manifold types
HL*2V HL*28M8F4F HL*2HSDLH HD*2HLHFF
*Insert code
for selected
Material HAL*2V HL*2VTF HL*3DBB HD*2HLHCP
material in
part number page 104 page 104 page 104 page 98
Stainless steel Std S 3 3 3 3

Monel M 3 3 3 3
Duplex D1 3 3 3 3
Super Duplex D2 3 3 3 3
Hasteloy HC 3 3 3 3
Carbon Steel C 3 3 3 3
6Mo 6MO 3 3 3 3
Titanium T 3 3 3 3
Manifolds
Incoloy 825 825 3 3 3 3

2 Valve
Inconel 625 625 3 3 3 3

All non-wetted parts ie those not in contact with the process medium will be supplied in stainless steel.
High pressure versions can be supplied in any of the above materials.

HEF*2LH HD*2EXT HL*2V1KFMB
*Insert code
for selected
Material material in HEF*2LH8N HD*2HLH HL*2V2KFMB ML*2VTF4N
part number page 98 page 98 page 100 page 102
Stainless steel Std S 3 3 3 3

Monel M 3 3 3
Duplex D1 3 3 3
Super Duplex D2 3 3 3
Hasteloy HC 3 3 3
Carbon Steel C 3 3 3
6Mo 6MO 3 3 3
Titanium T 3 3 3
Manifolds
Incoloy 825 825 3 3 3
2 Valve
Inconel 625 625 3 3 3

'H' Series
'H' SeriesTwo
TwoValve
Valve manifolds
manifolds
Page 94/95 94/95
HL*28M8F4F+HP
HL*2V+HP
Available options
Suffix adding
HAL*2V+HP
HL*2VTF
Part No.
sequence
Function Option Detail

suffix
1 Gland packing Graphoil 3 3 3

2 Seating PCTFE 9 3 3
PEEK PK 3 3
Note 1 Rising plug valve style PTFE packed RP
Stellite tip ST 3 3
3 Plug/Bleed valve (supplied loose in box) Blank plug 1/4 NPT P 3 3
Bleed valve 1/4 NPT BV 3 3
4 Connection and bolting Note 2 Socket weld (* insert pipe size) SW*NB 3 3
Note 2 Butt weld (* insert pipe size) BW*NB 3 3
Manifolds
Manifolds
Valve
22Valve
Note 3 DIN 19213 sealing grooves DIN†

BSPT (*insert pipe size (e.g. 8K = 1/2") *K 3 3
Note 4 BSPP (*insert pipe size (e.g. 8R = 1/2") *R 3 3
St. St. Mounting bolts SSB
M10 x 1.5 CS Mounting bolts CSB10
M10 x 1.5 St. St. Mounting bolts SSB10
Front face drain 1/4" NPT FFD
Bolts for 3051 inclusive flange CSBCP
Swivel gauge outlet (**insert size/thread N=NPT) **SG 3 3
5 Connection size for tubing See below
6 Operating mechanism Lockable T bar THL 3 3
(See page 93 for details) Anti tamper spindle AT 3 3
Anti tamper spindle & key ATK 3 3
Handwheel HW 3 3
Lockable handwheel LHW 3 3
7 Mounting Note 5 Assembled to bracket BRK 3 3
8 Condition NACE (latest issue) NACE 3 3
Cleaned and lubricated for oxygen use OXY 3 3
Firesafe FS 3 3
Note 6 Heat code trace certificates HCT 3 3
Test certificates TC 3 3
Air testing PT 3 3
Note 11Seat
Note Seatmaterial
materialRP=standard
RP=standard acetal,
acetal, RP9RP9 = PTCFE,
= PTCFE, RPPKRPPK = PEEK.
= PEEK.
Note 22For
Note Fortube
tubesocket
socketor or tube
tube buttbutt
weldweld
use use
1/161/16
inch inch denominations
denominations and change
and change NB to TB.
NB to TB.
metrictube
For metric tubesize
sizeuseuseactual
actual metric
metric (mm)
(mm) dimensions
dimensions e.g. SW12MMTB.
e.g. SW12MMTB.
Note 33Insert
Note Insertseal
sealtype
type'B1',
'B1', 'B2',
'B2', 'B3'.
'B3'.
Note 44For
Note ForBSPP
BSPPconnections
connections drain/bleed
drain/bleed will will be BSPP.
be 1/8 1/8 BSPP.
Note 55Bracket
Note Bracketwill
willinclude
include 'U''U'
boltbolt & manifold/bracket
& manifold/bracket bolts.bolts.
Note 66Heat
Note Heatcode
codetraceable
traceable certificates
certificates for body
for body and and
bonnet.bonnet.
108 108 ParkerCorporation

Parker Hannifin Hannifin Corporation
'H' Series Two
'H' Series valve
Two valvemanifolds
manifolds
94/95 94/95 94/95 98/99 98/99 98/99 100/101 102

HL*28M8F4F+HP
HL*2VIKFMB
HL*2HVSDLH
HD*2HLHFF
HL*2V+HP
HD*2EXT
HEF*2LH
HL*3DBB/1+HP
HL*2V12KFMB
HAL*2V+HP
HD*2HLHCP
ML*2VTF4N
HEF*2LH8N
HD*2HLH
HL*2VTF
Option Detail
3 3 3 3 3 3 3 Graphite
3 3 3 3 3 3 3 PCTFE
3 3 3 3 3 3 3 PEEK
3 Rising plug valve style PTFE packed
3 3 3 3 3 3 3 Stellite tip
3 3 3 3 3 3 3 Blank plug 1/4 NPT
3 3 3 3 3 3 3 Bleed valve 1/4 NPT
3 3 3 3 3 3 3 Socket weld *insert pipe size
3 3 3 3 3 3 3 Butt weld * insert pipe size
Manifolds
3 3
Manifolds
22Valve
DIN 19213 sealing grooves
3 3 3 3 3 3 3
Valve
BSPT (*insert pipe size (e.g. 8K = 1/2")
3 3 3 3 3 3 3 3 BSPP * pipe size (e.g. 8R = 1/2")
3 3 3 3 St. St. Mounting bolts
3 3 3 M10 x 1.5 CS Mounting bolts
3 3 3 M10 x 1.5 St. St. Mounting bolts
3 3 3 Front face drain 1/4" NPT
3 Bolts for 3051 inclusive flange
3 3 3 3 Swivel gauge outlet (**insert size/thread N=NPT)
See below
3 3 3 3 3 3 3 Lockable T bar
3 3 3 3 3 3 3 Anti tamper spindle
3 3 3 3 3 3 3 Anti tamper spindle & key
3 3 3 3 3 3 3 Handwheel
3 3 3 3 3 3 3 Lockable handwheel
3 3 3 3 3 3 3 Assembled to bracket
3 3 3 3 3 3 3 NACE (latest issue)
3 3 3 3 3 3 3 3 Cleaned and lubricated for oxygen use
3 3 3 Firesafe
3 3 3 3 3 3 3 3 Heat code trace certificates
3 3 3 3 3 3 3 3 Test certificates
3 3 3 3 3 3 3 3 Air testing
AccessoriesAccessories
and sparesand spares
Description Description Part number
Part number Box
BoxQuantity
Quantity
PTFE manifold/instrument seals
PTFE manifold/instrument seals HKITPTFESEALS
HKITPTFESEALS 22
Graphoil manifold/instrument seals
Graphoil manifold/instrument seals HKITGRAPHOILSEALS
HKITGRAPHOILSEALS 22
Isolate valve with PTFEvalve
Isolate gland,
withmetal seat metal seat
PTFE gland, HBNTS*ISPTFE/3
HBNTS*ISPTFE/3 33
Drain/bleed valve with PTFE
Drain/bleed gland,m
valve metal
with PTFE seat metal seat
gland,m HBNTS*DRPTFE/3
HBNTS*DRPTFE/3 33
Isolate valve with graphoil
Isolate valve gland, metalgland,
with graphoil seat metal seat HBNTSISGRAP/3
HBNTSISGRAP/3 33
Drain/bleed valve with graphoil
Drain/bleed gland,
valve with metalgland,
graphoil seat metal seat HBNTSDRGRAP/3
HBNTSDRGRAP/3 33
*Insert*Insert
9 for PCTFE seatseat
9 for PCTFE
*Insert*Insert
PK forPKPEEK
for PEEK
oration 109 109 Parker Hannifin

Parker Corporation
Hannifin Corporation
Hi-Pro Manifolds for
High Performance
Instrument Control
Catalog 4190-HBM
August 2006
Manifolds
2 Valve
Hi-Pro Manifolds for up to 10,000psig (689 barg) operation
Contents
Page 114 Hi-Pro Ball valve construction and

P/T graph
Manifolds
2 Valve
Page 115 "H" series needle construction,

handle options and P/T graph
Page 116/117 Hi-Pro single block and bleed manifolds
Page 118/119 Hi-Pro double block and bleed manifolds
l
ro
nt
Co
nt
u me
In str Bo
dy
ce edle
m an Ne –
r for Ba
ll –
Pe – –
–
gh es PKN
Hi All
Valv – – – M
*NB
for PKB
– SW *NB
lds SW *NB
– –
o tail
3 – BW
nif e – *K
nD – –
Ma
–
tio P – *R 2
ns Op – note
ro tio
BV – See LC
-P es)
V –
Hi op ll v
alv
PB
–
– –
–
ble
–
Page 120 Manifold and valve options and spares Av

ail
a
F u n ctio
n ra
G K
phit
e (a
PEE k plu e
n
g1
/2
Bla d valv ed va tensio

NP
T
lv e n
–
–
–
–
–
–
–
–
–
AT*
*
–
–
–
–
e le SA
* ATK *
ing
x
add e
le b –
B ld e –
ffix uenc
g
&
lug et we – HW *
k in P – W
eld LH *
seq
ac k –
n dp e x ) Soc ket w – T HL
lv o c –
Su
Gla ting d va in b So weld – –

e e –
1 Sea g/Ble loos Butt T – –
2 Plu pplied BS P
P
I™ nnec
tor – HL* –
le P / CP –
3 (su on
sty BS OK® nd co on –
e –
ecti A-L ured ctuati ar – –
nn a –
Co 1 Sec nner er T b ey – –
te k
4 No Spa tamp er + – – –
n ti p e l C E
A tam el he NA –
A nti whe and w
m d h Y –
2 anis Han kable handle OX –
N o te
me
c h c
Lo kable hole rack s e t F S for
ti ng L oc ting to b fo r F C l s ize
era un d ted T a
Op 3 Mo emble rica HC actu al
No
te
Ass E lub ive
5 C
NA ned se
and
/2"
.G actu E
a u =1 use ber
Cle ygen d
e. 8 tric num dary
ox safe certifie . me
n g ir e fe e rts 6 " i.
. F or ix part econ
ti F s a C /1 8A uff S
un Fire t Cod
e f1 "= ® s 2 =
Mo 4 so 1/2 OK ary,
te
No ditio
n Hea tion i.e. A-L rim
6 ina or
Co
n
5 om TB. tions . 1/2" 1 = P nd
No
te den to a .g e. ya
7 se NB min t e i. uir
g u ge eno inle ture s. enq
izin chan 6" d ecify g fea bolt d at
es /1 ket ste
pip t weld se 1 To sp lockin rac que
or u . ld/b rly re
tu be socke PI™ to Z quires if o a
112 Parker Hannifin Corporation No
or e
te 1 Fo r A-LO ch h va
o
: F CP
/C
: F r tub K® ange lve
I™ whic
.
A re
e U ts
n
ma e cle
and ld b
bolt shou
te 2 For dicate valves clud emen
No in ir .
3 : *In = All t will requ tively
te e
4 ck tion pe c
No ra a os
: B rtific e retr
te 4 Ce ert
No te 5: provid *Ins
S
No M
D1
std
eel HC
rial s st
Introduction
With many years of manifold development and manufacture Parker Hannifin are able to offer the most comprehensive
range of block and bleed and double block and bleed manifolds to suit all types of instrumentation installations,
specifications and applications.
Now consolidated into one catalog, selection can be made from a comprehensive range of bodies with a variety of
connections and valve positions, optimising installation and access opportunities.
Designed to reduce installation costs and improve safety performance, the consolidation of valves into one unit
provides you with a combination of instrument
isolation together with bleed/vent and test
facilities.
In addition to manufacturing manifolds Parker
also produce a comprehensive range of single
and twin ferrule high integrity tube fittings.
Manufactured in a variety of materials these
products are used extensively in the oil, gas,
petro-chem, power, processing and many
other markets.
By integrating these products, instrument
manifolds and tube fittings, Parker can offer
Manifolds
unique connection combinations which are
2 Valve
specifically designed to eliminate site
assembled threaded connectors, ingress of
debris and contamination from thread sealant
materials which often result in instrument
failure, replacement and downtime. Eliminating
the use of taper threads, factory assembled
and tested connections will ensure improved
performance through simpler assembly and
installation procedures. This system provides
total flexibility of tubing position with positive
leak proof connections.
time to time necessitate changes in the details
contained in this catalogue. Parker Hannifin
reserve the right to make such changes at their
discretion and without prior notification.

Part description
Item Description
1 End Connector
2 E-seal™
3 Sealing washer
4 Seats Handle locking
5 Body
6 Ball
7 Anti blowout stem
Specifications 8 Thrust Seal
• 316 Stainless steel construction 9 Gland packing
• Maximum cold working pressure rating 10 Upper gland packing
6,000 psig (414 barg) with P.T.F.E. seats.* 11 Thrust bush
Manifolds
2 Valve
• Temperature rating PTFE seats 12 Stop pin

-54˚C to +204˚C (-65˚F to +400˚F).* 13 Thrust bush
• Maximum cold working pressure rating 14 Lock nut
10,000 psig (689 barg) with PEEK seats.*
15 Locking dome nut
• Temperature rating PEEK seats 16 Handle
-54˚C to +232˚C (-65˚F to +450˚F).*
17 Handle grip
*always refer to P/T graph Secured end connector
(double pin)
Features
• Two piece body design - minimal leakage
paths.
• 4:1 Pressure boundary designed safety factor.
• Designed to comply with requirements of
ANSI/ASME B16.34 where applicable.
• Bi-directional.
• PEEK and PTFE standard ball seat materials. Spanner actuation
• PTFE and Graphoil gland packings.
• Bubble tight shutoff. Performance Data Pressure vs temperature
seats featuring inherent self relief.
taper threads and thread sealants.
• Anti static.
• Optional firesafe designed to meet API 607,
BS6755 Pt2.
When selecting products for specific applications users should refer to our notice at the bottom of page 2


1 For safe reliable and repeatable performance
3 Part description
2 Item Description
2 "T" bar
4
3 Dust Cap
7 4 Gland packing adjuster
5 Gland adjuster lock nut
6
6 Valve Bonnet
9
8 8 Thrust Bush
11 10 Bonnet/body washer
10 11 Spindle tip
Pressure vs temperature Anti tamper spindle

Pressure
Manifolds
2 Valve
psi (bar) A - A Graphoil packing
10,000 A A - B PTFE packing
PTFE packing
8,000 B - C 6000 psi (414 bar)
A - D PEEK tip
6,000 B C - E PCTFE tip
(413)
4,000
(275) C For key only - part no.
2,000 ATHKEY/1
(138)
E D B C A
0 KITAT without key
0 100 200 300 400 500 Temperature KITATK with key
(32) (212) (392) (572) (752) (932) °C (°F)
Handwheel Lockable handwheel T bar handle locking
KITHW KITLHW KITTHL
When selecting products for specific applications users should refer to our notice at the bottom of page 2

Block and bleed remote mount static pressure manifolds

Purpose
This series of manifolds combines isolate in the form of a ball valve and bleed/vent in a choice of ball or needle into
one block for interface with pressure measurement transmitters, gauges and switches for applications up to
10,000psig (689 barg)
A variety of end connections can be provided including NPT as standard with optional BSPTr and BSPP. Parker can
also combine single or twin ferrule integral fitting technology into the product offering the end user the benefit of
leak path reduction and contaminant free connections by eliminating taper threads.
Manifolds
2 Valve
HPM6L*2
HPM6L*2B

Block and bleed remote mount static pressure manifolds

Series HPM6L*2B Standard Product Specifications
Part No. HPM6LS2B: 316 Stainless steel
construction with single isolate and
bleed/vent 10mm bore ball valves, PTFE
142.6
(5.61”)
packing, PTFE seats. Process and
instrument connection 1/2” NPT female,
bleed/vent 1/4” NPT female. Maximum cold
working pressure 6,000 psig (414 barg).
Part No. HPM6LS2BHP: 316 Stainless
141.6
(5.58”) steel construction with single isolate and
bleed/vent 10mm bore ball valves, PTFE
41.0
packing, PEEK seats. Process and
(1.61”) instrument connection 1/2” NPT female,
bleed/vent 1/4” NPT female. Maximum cold
106.5
(4.19”)
106.5 working pressure 10,000 psig (689 barg).
(4.19”)
190.7 188.0
(7.51”) (7.40”)
Series HPM6L*2 Standard Product Specifications

Part No. HPM6LS2: 316 Stainless steel
construction with single isolate 10mm bore
Manifolds
ball valve, PTFE packing, PTFE seats.
2 Valve
Bleed/vent valve globe pattern needle, none
rotating self-centering tip, T bar handle,
PTFE packing and metal/metal seat.
Process and instrument connection 1/2”
130.0 NPT female, bleed/vent 1/4” NPT female.
(5.12”)
Maximum cold working pressure 6,000 psig
(414 barg).
Part No. HPM6LS2HP: 316 Stainless steel
95.25 construction with single isolate 10mm bore
(3.75”)
ball valve, PTFE packing, PEEK seats.
44.5
(1.75”) Bleed/vent valve globe pattern needle, none
rotating self-centering tip, T bar handle,
106.5 44.5 PTFE packing and metal/metal seat.
(4.19”) (1.75”) Process and instrument connection 1/2”
178.0 95.25 (3.75") Open NPT female inlet, bleed/vent 1/4” NPT
(7.01”) 92.25 (3.63") Closed
female. Maximum cold working pressure
10,000 psig (689 barg)
Standard range part numbers Features

Standard connections • Standard high performance bonnet design.
Part No. Inlet (NPT) Outlet (NPT) Bleed/test (NPT) • Colour coded valve function identification.
HPM6L*2B 1/2" female 1/2" female 1/4" female • Alternative materials of construction available.
HPM6L*2BHP 1/2" female 1/2" female 1/4" female • Optional port sizes and thread forms available:
HPM6L*2 1/2" female 1/2" female 1/4" female BSPTr, BSPP.
HPM6L*2HP 1/2" female 1/2" female 1/4" female • Socket and butt weld connections available.
*Insert material designator, see page 120 • Blank and bleed plugs available.
• Optional cleaned and lubricated suitable for Oxygen
service.
Function • Heat code traceable body and bonnet.
Blue – isolate, • Optional Fire safe design to meet API 607,
Red – drain/bleed BS6755 Pt2.

Double block and bleed remote mount static pressure manifolds

Purpose
This series of manifolds combines double isolate (Primary and Secondary) and bleed/vent in a combination of
ball and needle into one block, for interface with pressure measurement transmitters, gauges and switches for
applications up to 10,000psig (689 barg).
A variety of end connections can be provided including NPT as standard with optional BSPTr and BSPP. Parker
can also combine single or twin ferrule integral fitting technology into the product offering the end user the benefit
of leak path reduction and contaminant free connections by eliminating taper threads.
Manifolds
2 Valve
HPM6L*3DBBN HPM6L*3DBB
HPM6L*3DBBB
Standard range part numbers Features
Standard connections • Standard high performance design.
Part No. Inlet (NPT) Outlet (NPT) Bleed/test (NPT) • Colour coded valve function identification.
HPM6L*3DBBN 1/2" female 1/2" female 1/4" female • Alternative materials of construction available.
HPM6L*3DBBNHP 1/2" female 1/2" female 1/4" female • Optional port sizes and thread forms available:
HPM6L*3DBB 1/2" female 1/2" female 1/4" female BSPTr, BSPP.
HPM6L*3DBBHP 1/2" female 1/2" female 1/4" female • Socket and butt weld connections available.
HPM6L*3DBBB 1/2" female 1/2" female 1/4" female • PTFree connections available (see page 120).
HPM6L*3DBBBHP 1/2" female 1/2" female 1/4" female
*Insert material designator, see page 120
• Optional cleaned and lubricated suitable for Oxygen
service.
Function • Heat code traceable body and bonnet.
Blue – isolate, • Optional fire safe design to meet API 607,
Red – drain/bleed BS6755 Pt2.

Double block and bleed remote mount static pressure manifolds

Series HPM6L*3DBBN Standard Product Specifications
Part No. HPM6LS3DBBN: 316 Stainless steel
construction with primary isolate 10mm bore ball
valves, PTFE packing, PTFE seats. Secondary
isolate and bleed/vent valve globe pattern needle,
none rotating self centering tip, T bar handle, PTFE
130.0 packing and metal/metal seat. Process and
(5.12”)
instrument connection 1/2” NPT female, bleed/vent
1/4” NPT female. Maximum cold working pressure
6,000 psig (414 barg).
95.25
(3.75”) Part No. HPM6LS3DBBNHP: 316 Stainless steel
44.5 construction with primary isolate 10mm bore ball
(1.75”)
valves, PTFE packing, PEEK seats. Secondary
isolate and bleed/vent valve globe pattern needle,
106.5
(4.19”)
44.5
(1.75”)
none rotating self centering tip, T bar handle, PTFE
packing and metal/metal seat. Process and
178.0 146.05 (5.75") Open instrument connection 1/2” NPT female, bleed/vent
(7.01”) 140.05 (5.51") Closed
1/4” NPT female. Maximum cold working pressure
10,000 psig (689 barg).
Series HPM6L*3DBB Standard Product Specifications

Part No. HPM6LS3DBB: 316 Stainless steel
Manifolds
2 Valve
construction with double isolate 10mm bore ball
valves, PTFE packing, PTFE seats. Single
bleed/vent valve globe pattern needle, none rotating
142.6
(5.64”) self-centering tip, T bar handle,PTFE packing and
metal/metal seat. Process and instrument
connection 1/2” NPT female, bleed/vent 1/4” NPT
female. Maximum cold working pressure 6,000 psig
(414 barg).
143.5
(5.65”) Part No. HPM6LS3DBBHP: 316 Stainless steel
construction with double isolate 10mm bore ball
42.7 valves, PTFE packing, PEEK seats. Single
(1.68”)
bleed/vent valve globe pattern needle, none rotating
self-centering tip, T bar handle,PTFE packing and
44.5 metal/metal seat. Process and instrument
149.6 (1.79”)
(5.89”) connection 1/2” NPT female, bleed/vent 1/4” NPT
231.1 95.25 3.75") Open female. Maximum cold working pressure 10,000
(9.10”) 92.25 (3.63") Closed
psig (689 barg).
Series HPM6L*3DBBB Standard Product Specifications

Part No. HPM6LS3DBBB: 316 Stainless steel
construction with double isolate and vent/bleed
10mm bore ball valves, PTFE packing, PTFE seats.
142.6 Process and instrument connection 1/2” NPT
(5.61”)
female, bleed/vent 1/4” NPT female. Maximum cold
141.6 Part No. HPM6LS3DBBBHP: 316 Stainless steel

(5.58”)
construction with double isolate and vent/bleed
10mm bore ball valves, PTFE packing, PEEK seats.
41.0 Process and instrument connection 1/2” NPT
(1.61”)
female, bleed/vent 1/4” NPT female. Maximum cold
149.6 106.5
(5.89”) (4.19”)
231.1 188.0
(9.10”) (7.40”)

Hi-Pro Manifolds for High Performance Instrument Control
Available options
Suffix adding
sequence
Function Option Detail All Valves Ball Needle Body
1 Gland packing Graphite (all valves) 3 – – –

2 Seating PEEK – PKB PKN –
3 Plug/Bleed valve Blank plug 1/2 NPT P – – –
(supplied loose in box) Bleed valve BV – – –
Plug & bleed valve PBV – – –
4 Connection style Socket weld extension – – – SW*NBM
Note 1 Socket weld – – – SW*NB
Butt weld – – – BW*NB
BSPT – – – *K
BSPP – – – *R
Note 2 A-LOK®/CPI™ – – – See note 2
Secured end connector – – – LC
5 Operating mechanism Spanner actuation – SA* –
Note 3 Anti tamper T bar – – AT* –
Anti tamper + key – – ATK* –
Manifolds
2 Valve
Hand wheel – – HW* –

Lockable hand wheel – – LHW* –
Lockable handle – HL* THL* –
6 Mounting Mounting holes – – – MH
Note 4 Assembled to bracket – – – BRK
7 Condition NACE NACE – – –
Note 5 Cleaned and lubricated for
oxygen use OXY – – –
Fire safe FS – – –
Fire safe certified FC – – –
Heat Code Certs. HCT – – –
Note 1: For tube or pipe sizing use denominations of 1/16" i.e. 8 = 1/2". Give actual size for metric i.e. M12.
For tube socket weld change NB to TB.
Note 2: For A-LOK®/CPI™ use 1/16" denominations i.e. 1/2"=8A. For metric use actual size i.e. 12mm = M12A.
For CPI™ change A to Z. To specify inlet e.g. 1/2" A-LOK® suffix part number E8A and for outlet X8A.
Note 3: *Indicate which valve requires locking feature i.e. 1 = Primary, 2 = Secondary, 3 = Vent/drain,
4 = All valves.
Note 4: Bracket will include U bolt and manifold/bracket bolts.
Note 5: Certification requirements should be clearly requested at enquiry and order stage - we are unable to
provide retrospectively.
Material *Insert
316 Stainless steel std S
Monel M
Duplex D1
Hasteloy HC
Carbon steel C
6Mo 6MO
Inconel 625 625

‘H’ Series
3 and 5 Valve
Differential
Pressure
Manifolds
Catalog 4190-FM
August 2006
3 & 5 Valve
Manifolds
‘H’ series 3 and 5 valve manifolds
Contents
15
Page 124/125 Bonnet assembly details and options
Page 126/127 Manifold key features
Page 128 3 Valve direct mount manifold

Pipe to flange style

Base entry and flange style

Extruded body flange style

Compact cast body style
Page 132 3 Valve remote manifold

High pressure style
Page 133 3 Valve manifold

3051 and Miniature style

3 & 5 Valve
Manifolds
Pipe to flange style

Custody transfer and oval flange style

3051 and base entry style

Compact cast body style

Extruded body flange style
s
old
anif
Page 139 5 Valve remote manifold 5 valv
em
and
High pressure style ser
ies
3
types
ML*
3V4N
‘H’ Man
ifold N
HF*38
8N
H EF*3
HL*3M HF*3
Page 140/141 Manifold bracket mounting tion

s
tech
nica
l HD*3
M
HEF
*3
pa
p CP ifold
ial o
e M
n se HD*3 s 3 Man
ter ecifi
catio
old
Ma ll material sp HD*3 anif 3 14
For fu n e m CAST 3
sect
io HD*3
MFF
valv3 3 Page
Page 142 PTFree connect rt co
de HD*3
EXT
ies
3a3
nd
5
anif
old
s
3
*Inseselected
for erial in ser3 3 valv
em 3
mat number ‘H’
part f iv3e 3 no.
3 r 3 Part ix
eria
l
s fo 3 3
Mat ion3 3 3
suff
Opt 3
S
3
Page 143 Material matrix less
stee
l Std
M
D2
D1 3
3
3
3
Op tion
De tail 3
9
Stain
3
PK
HC 3
el l.
s stee RP
3
Mon a d
3
x C e
R in stai nl es
le ST
3
Dup Duplex O d
6M n lie l HP) UPP
Super y ctio will be su
pp oi ed
3 n G raph tip (not pack FF
ding
lo T F u FE M DT
Suff quence
Haste n Steel ium

E es
PCTFtyptip ug, PT HD*5
Page 144-147 Manifold options 82 5 m ed pl
ix ad
s d ng
Carbo 5 pr oces M
ol
anif PEEKdable/risi *5 8NC
T
S
se
62 th e g EF
6Mo t with p ackin 1
Rod p H
te Ti s 1/4 N
PT
in box) P
um ac d e te lli
N e C
Titani 825 t in co
nt Glan ng Not S rt
HF*58rge po 1/4 NPT NPT (lo ze)HD*5
os M
loy e no 1
Sea
ti Pu rts 1/4 T pe si
Inco l 625 ie thos 2 C T ote 2 st po plugs se*5rtCpi ) 1/ 2”)
ne s *5 N Te EF ze =
Inco part HD s 2 on (*Hin si )
etted on Note Hexag t weld sert pipe ze e.g. 8K = 1/2”
n-w necti SF*oc5ke d (* in ad si e.g. 8R
All no HD*5 al con 3 H utt wel sert thre ad size /CPI
Opti
on Note B (* in thre -LOK
3 s HL*5 BSPT (* insert tions A ge 22) ves
plug 3
n k S PP nn ec pa gr oo
Bla ecMtion B co ee
rted nnect (s ent seal
3
4
4
CHonD
n*5 Note Inve
PTFr 213 in ar 3
ee co strum
3
5
19 ‘T’ B
HL*5M DIN 3
e
5 ASckT able r spindl e + key
e EX T Note CLo
ta m pe in dl
3
d i sp
122 Parker Hannifin Corporation rt co
*Inseselected
for erial in
HD*5
3ing for
ec han 3
is m3
Ant
A nt i tampe
r
el
dwhe handwhe ket
el 3
ckab ed to br 3
m H an
mat number le ac
t at )3
ee p3 nal def
ar p er 5 io n Lo bl
p O age init
3
s lts 7/
eria
l 6 Assem centre
funct3
at (s 6 m s g bo
3 56m centre l mountin g bolts
M io
S Note
3
m in
M 3 57m less stee . mount l mou
3 g
ee
Stain x 1.5 C.S nless st
l Std D1
ntin 3
stee Mou 3 M10 x 1.5 stai sue) for o
Stain
less D2 3 st is icated
3
7 M 10 te
el HC E (la el. lubr
Introduction
With years of manifold design and development experience Parker Hannifin are able to offer the most
comprehensive range of differential pressure transmitter manifolds available to users for a wide variety of
applications and industries. Now consolidated into one catalogue Parker is able to offer a simplified system of
selection and choice for all Instrument applications and installations.
In addition to producing manifolds Parker also makes twin and single ferrule compression fittings A-LOK® and
CPI™ which are used extensively in the oil, gas, petro-chem, power, processing and many other industries.
Combining these as an integral part of manifold and valve bodies users can eliminate pipe threaded connections
reducing leak paths and
avoiding the use of thread
sealant, a frequent
menace to instrument and
system performance.
All the valves offered in

this catalogue are
available with PTFree
connections improving
system performance,
safety factors and
simplifying installation and
ultimately reducing
customer costs.
3 & 5 Valve
Continuous product
Manifolds
development may from
time to time necessitate
changes in the details
contained in this
catalogue. Parker Hannifin
reserve the right to make
such changes at their
discretion and without
prior notification.


1. Positive handle retention design featuring For safe reliable and
repeatable performance 3. Dust Cap
broached square engagement positioned by This has a dual purpose, preventing air born
2. "T" bar functional identification. Isolate (BLUE)
Ergonomically designed for ease of operation. Bleed/test (RED).
Anti-tamper and lockable devices can be
supplied for on site retro-fit. 5. Gland adjuster lock nut
A secure anti vibration locking mechanism to
4. Gland packing adjuster prevent inadvertent gland adjuster loosening.
For maximum packing stability and
performance, simple and easily adjustable for 7. Anti blowout spindle
gland wear compensation. Designed for low torque operation with high
quality micro mirror stem finish for positive
6. Valve Bonnet gland sealing.
Standard construction for maximum pressure
rating with replaceable bonnet sealing washer 9. Gland packing (adjustable)
arrangement. Chevron style dual piece gland packing to
provide maximum sealing area contact with
8. Thrust Bush minimum gland adjustment.
Anti rotational adjustor bush ensures uniform
packing compression, maximising pressure tight 11. Spindle tip
sealing and limiting cold flow passages. Self centering, non-rotational tip gives
successive positive bubble tight shut off
10. Bonnet/body washer assuring the user of leakage free performance
Annealed sealing washer to ensure complete and downstream functional safety.
fit of bonnets with 100% re-sealing assurance
• Height closed (standard and HP) = 47mm (1.85”) • Standard unit throughout manifold range.
3 & 5 Valve
Manifolds
Height open (standard and HP) = 50.3mm (2.00”) • Operating threads outside washout area.
• Maximum standard pressure up to 6,000 psig (414 • Low operating torque.
• Maximum optional pressure (limited to HP suffix see • Retro-fit kit for:-
pages 132 & 139) up to 10,000 psig (689 barg). Anti-tamper spindle.
• Maximum temperature PTFE 260C (500F). Lockable T bar.
Pressure vs temperature fitted as standard.
Pressure
psi (bar) A - A Graphoil packing • Alternative graphite packing for high temperature
10,000 A A - B PTFE packing performance available.
PTFE packing • Alternative self centering tip materials available for
8,000 B - C 6000 psi (414 bar) gaseous and aggressive fluids.
A - D PEEK tip • Safety back seated spindle prevents stem blowout
6,000 B C - E PCTFE tip and provides secondary back up stem seal.
(413)
4,000
(275) washout.
C
2,000
(138) • NACE certified wetted parts available.
0
Oxygen service.
0 100 200 300 400 500 Temperature

Optional manifold globe style bonnet design

The design options below can be simply retrofit to any "H" series standard manifold. Retrofit kit part numbers are listed
next to the illustrated option and all parts will be supplied in stainless steel regardless of the parent body material.
To obtain factory assembled options the manifold part number must be suffixed with the option and function
designator. This allows you to select one or both of the bonnets to be fitted with the selected option or, different
options to be fitted to either of the bonnets.
Function designator IS – isolate, DR – drain/test, EQ – equalize.
Example HD*5MATDR – manifold with drain/bleed valves (DR) fitted with anti-tamper (AT). Isolate valves will be
standard bonnet design.
Example HL*5MHWISTHLDR – manifold with isolate valves fitted with hand-wheel and drain/bleed valves fitted
with "T" bar locking mechanism.
Note: Padlocks for lockable handwheels and "T" bars are not supplied (hole size 6mm/0.24").

ATHKEY/1
3 & 5 Valve
KITAT without key
Manifolds
THL ATK with key
KITHW KITLHW KITPM
Factory assembled suffix Factory assembled suffix Factory assembled suffix
HW LHW PM
*Panel mounting hole diameter = 26mm (1.02”).

Panel thickness = Max 5mm (0.20”) Min 2.3mm (0.09”).

Three and five valve manifolds for direct or remote mounting

Purpose
Instrument manifolds are a consolidation of single valves into a unitised block and allow engineers the flexibility
to perform various tasks and functions without removing the transmitter from its installed position.
Manifold key features (example)
Bonnet assemblies: are all functionally colour coded, 3 valve manifolds are Functional colour
provided with 2 IS and 1 EQ. 5 valve manifolds are provided with 2 IS, 2 DR and 1 coding:
EQ (as illustrated here). Alternatively 5 valve manifolds for custody transfer/fiscal RED =
metering are fitted with 2 IS, 1DR and 2 EQ. For extruded style manifold blocks Drain/vent/test
straight through flow rising plug style valves can be fitted. BLUE =
Isolate/block
Manifold body: GREEN =
this is standard Equalize
Test/Drain Equalize Test/Drain
compact bar stock
style suitable for
enclosure
installation.
Extruded forms
are also available
as standard.
Isolate Isolate
3 & 5 Valve
Manifolds
Process inlet connections positioned on Drain/bleed connections the position depends upon
front face 1/2” NPT female threads or kidney manifold design but are generally on the bottom face
flange/oval/futbol are standard. Alternative of the manifold. Other optional positions are available.
thread forms, socket or butt weld and PTFree On 3 valve manifold systems test and purge ports are
connections are available. optional choices.
Standard connections are on 2.125"/54mm.
Manifold marking: all manifolds are permanently marked with line diagram showing manifold capability.
Example:
316SS
Part No: HDS5M
PTFE: 260 Deg C (500 F) max.
Model: A1........1/2NPT/1/4NPT www.parker.com
All Parker direct mount manifolds are rated up to 6000psig (414 barg).
Remote mount 10,000psig (689 barg) are available

Three and five valve manifolds for direct or remote mounting

Instrument side, outlet, flange connections: are standard for direct
Pressure rating:
mount manifolds with machined grooves for PTFE seal rings. Optional DIN
maximum standard rating
sealing groove arrangement is also available. Remote style manifolds are
6000psig (414 barg).
provided as standard with 1/2” NPT female outlet connections (alternative
Remote mount
thread forms etc. are available). Flanged outlets are positioned on
10,000psig (689 barg) are
54mm/2.125” centres. (56/57mm options are available). Manifolds for 3051
available
style transmitters are available as standard
Seal rings:
Isolate Isolate
3 & 5 Valve
Manifolds
Manifold to transmitter mounting: all Manifold base/bracket mounting: all manifolds are
direct mount manifolds are provided with provided with bracket mounting holes. This provides the
4 off 7/16 UNF x 1.625” high tensile zinc user with the opportunity to bracket mount the
plated carbon steel bolts. Bolt holes are instrument allowing installation to take place without the
standard on 54mm/2.125” centres. instrument and to give full mounting support in the event
Optional St. St. bolts are available. of Instrument removal.
Bolts: Pressure
psi (bar) A - A Graphoil packing
10,000 A A - B PTFE packing
PTFE packing
8,000 B - C 6000 psi (414 bar)
A - D PEEK tip
6,000 B
C - E PCTFE tip
(413)
Material: Products in this catalogue are
standard in stainless steel and can also be 4,000
(275)
C
produced in many other materials as shown
2,000
on page 143. (138)
For full material specifications please refer to
E D B C A
the technical section. 0
0 100 200 300 400 500 Temperature
(32) (212) (392) (572) (752) (932) °C (°F)

Three valve manifold

Compact design for direct mounting to differential pressure transmitters with 54mm/2.125” mounting centres,
supplied with instrument mounting bolts and PTFE seals. Test ports available as standard on top face (plugs to
be ordered separately - not fitted). Purge port options available.
107.6
(4.24")
63.5
(2.50")
110.0 28.6
(4.33") (1.13")
211.6
(8.33")
HD*3MDTP
d d d
p p p
Part No. Inlet/process Outlet/inst. Drain/bleed/test Standard With test ports With purge ports
HD*3M 1/2” NPT Flanged -

HD*3MDTP 1/2” NPT Flanged 1/4” NPT
HD*3M HD*3MDTP
3 & 5 Valve
Manifolds
Compact design particularly suited for enclosure installation and for direct mounting to differential pressure
transmitters with 54mm/2.125” mounting centres, supplied with instrument mounting bolts and PTFE seals.
Additional test or purge port options are available.
107.6
(4.24")
63.5
(2.50")
138.0 28.6
(5.43") (1.13")
HD*3
d d d
p p p
Standard With test ports With purge ports
Part No. Inlet/process Outlet/inst. Drain/bleed/test

HD*3 1/2” NPT Flanged Optional
* Insert material designator see page 143 For full list of options see page 144 - 147


Specifically designed for installation inside enclosures enabling bottom entry connections to be completed outside
of the enclosure. Suitable for direct mounting to differential pressure transmitters with 54mm/2.125” mounting
centres, supplied with instrument mounting bolts and PTFE seals. Additional test or purge port options are available.
HD*3EXT
114.3
(4.50”)
114.3 38.1
(4.50”) (1.50”)
88.9
HD*3EXT
215.9
(8.50”) (3.50”)
HD*3EXT
d d d
p p p
HD*3MFF

HD*3EXT 1/2” NPT Flanged Optional
3 & 5 Valve
Manifolds
Compact design suitable for direct mounting to differential pressure transmitters with 54mm/2.125” mounting
centres. Process/inlet connections are via standard kidney flange ovals/futbols. Manifold supplied with instrument
mounting bolts and PTFE seals. Additional test or purge port options are available.
HD*3MFF
107.6
(4.24”)
63.5
(2.50”)
110.0 28.6
(4.33”) (1.13”)
211.6
(8.33)
HD*3MFF
d d d
p p p

HD*3MFF Flanged Flanged Optional


Extruded body design for direct mounting to differential pressure transmitters with 54mm/2.125” mounting centres,
supplied with instrument mounting bolts and PTFE seals. Additional test or purge port options are available.
HEF*38N
62.0
(2.44”)
101.6
(4.00”)
98.5 31.8
(3.88”) (1.25”)
200.1 82.6
(7.88”) (3.25”)
HEF*38N
HEF*3
HEF*38N
d d d
p p p

HEF*38N 1/2” NPT Flanged Optional

3 & 5 Valve
Manifolds
centres. Process/inlet connections are via standard kidney flange ovals/futbols. Manifold supplied with instrument
mounting bolts and PTFE seals. Additional test or purge port HEF*3
options are available. Roddable option available
(see CAT4190HV page 126 & 127 for rising plug valve details).
62.0
(2.44”)
96.4
(3.80”)
98.5 31.8
(3.88”) (1.25”)
200.1 97.7
(7.88”) (3.85”)
HEF*3
d d d
p p p

HEF*3 Flanged Flanged Optional


Compact cast body design with optimum positioning of equalize valve for easy access and operation. Manifold
suitable for direct mounting to differential pressure transmitters with 54mm/2.125” mounting centres, supplied
with instrument mounting bolts and PTFE seals. Additional test or purge port options are available.
HFS38N
85.8
(3.38”)
113.4
(7.01”)
61.5
(3.76”)
HFS38N
187.4 67.0
(7.38”) (2.64”)
HFS38N
d d d
p p p
Standard
HFS3 With test ports With purge ports

HF*38N 1/2” NPT Flanged Optional
3 & 5 Valve
Manifolds
suitable for direct mounting to differential pressure transmitters with 54mm/2.125” mounting centres. Process/inlet
connections are via standard kidney flange ovals/futbols. Manifold supplied with instrument mounting bolts and
HFS3
PTFE seals. Additional test or purge port options are available.
85.8
(3.38”)
113.4
(7.01”)
61.5
(3.76”)
187.4 67.0
(7.38”) (2.64”)
HFS3
d d d
p p p

HF*3 Flanged Flanged Optional


Compact design for remote installation from differential pressure transmitters. Test ports available as standard on
top face (plugs to be ordered separately - not fitted). Purge port options available.
HL*3MDTP
63.5
(2.50”)
54.0
(2.125”)
120.0 28.6
(4.72”) (1.13”)
220.0 79.4
(8.66”) (3.13”)
HL*3MDTP
HL*3MDTP
HL*3MHP
d d d
p p p

HL*3M 1/2” NPT 1/2” NPT Optional
HL*3MDTP 1/2” NPT 1/2” NPT 1/4” NPT
HL*3M HL*3MDTP
Three valve manifold for 10,000 psig (689 bar)

3 & 5 Valve
Manifolds
Compact design for remote installation from differential pressure transmitter. Additional test or purge port options
are available. HL*3MHP
76.2
(3.00”)
54.0
(2.125”)
132.0 31.8
(5.20”) (1.25”)
232.0 82.6
(9.14”) (3.25”)
HL*3MHP
d d d
p p p

HL*3MHP 1/2” NPT 1/2” NPT Optional

Three valve manifold for model 3051 transmitter

Specifically designed for mounting to the 3051 series of differential pressure transmitters with outlets positioned
to avoid the use of the adaptor/convertor flange. Inlet connections are on 54mm/2.125”. These manifolds are not
supplied with sealing rings, bolts are provided. Additional test or purge port options are available.
HD*3MCP
3 & 5 Valve
Manifolds
107.6
(4.24”)
63.5
(2.50”)
33.0 28.6
(1.30”) (1.13”)
110.0
(4.33”)
211.6
(8.33”)
HD*3MCP
d d d
p p p

HD*3MCP 1/2” NPT For 3051 Optional

Five valve manifold

Compact design for direct mounting to differential pressure transmitters with
HD*5M54mm/2.125” mounting centres,
supplied with instrument mounting bolts and PTFE seals.
107.6
(4.24”)
63.5
(2.50”)
138.0 28.6
(5.43”) (1.13”)
239.6
HD*5M
(9.43”)
HD*5M
HD*5

Test/ Process Test/
HD*5M 1/2” NPT Flanged 1/4” NPT drain drain
Five valve manifold

3 & 5 Valve
Manifolds
Compact design particularly suited for enclosure installation and for direct mounting to differential pressure
transmitters with 54mm/2.125” mounting centres, supplied with instrument
HD*5mounting bolts and PTFE seals.
107.6
(4.24”)
63.5
(2.50”)
152.4 28.6
(6.00”) (1.13”)
254.0
(10.00”)
HD*5

HD*5 1/2” NPT Flanged 1/4” NPT Test/
drain
Process Test/
drain

Five valve manifold

HD*5MFF with 54mm/2.125” mounting
Compact design suitable for direct mounting to differential pressure transmitters
centres. Process/inlet connections are via standard kidney flange ovals/futbol. Manifold supplied with instrument
mounting bolts and PTFE seals.
107.6
(4.24”)
63.5
(2.50”)
138.0 28.6
(5.43”) (1.13”)
239.6
(9.43”)
HD*5MFF
HD*5MFF
HD*5CT

Test/ Process Test/
HD*5MFF Flanged Flanged 1/4” NPT drain drain
Five valve custody transfer/fiscal metering manifold
3 & 5 Valve
Manifolds
Compact design for direct mounting to differential pressure transmitters with 54mm/2.125” mounting centres,
supplied with instrument mounting bolts and PTFE seals.
HD*5CT
152.4
(6.00”)
254.0
(10.00”)
HD*5CT

HD*5CT 1/2” NPT Flanged 1/4” NPT Process Drain Process

Five valve manifold

Specifically designed for installation inside enclosures enabling bottom entry connections to be completed outside
of the enclosure. Suitable for direct mounting to differentialHD*5EXT
pressure transmitters with 54mm/2.125” mounting
centres, supplied with instrument mounting bolts and PTFE seals.
145.5
(5.73”)
114.3
(4.50”)
HD*5EXT
114.3 38.1
(4.50”) (1.50”)
215.9 88.9
(8.50”) (3.50”)
HD*5EXT
HD*5MCP
Test/ Process Test/

Part No. Inlet/process Outlet/inst. Drain/bleed/test drain drain
HD*5EXT 1/2” NPT Flanged 1/4” NPT Standard
Five valve manifold for model 3051 transmitter

3 & 5 Valve
Manifolds
Specifically designed for mounting to the 3051 series of differential pressure transmitters with outlets positioned
to avoid the use of the adaptor/convertor flange. Inlet connections are on 54mm/2.125”. These manifolds are not
HD*5MCP
supplied with sealing rings, bolts are provided.
107.6
(4.24”)
63.5
(2.50”)
33.0 28.6
(1.30") (1.13”)
138.0
(5.43”)
239.6
(9.43”)
HD*5MCP
Part No. Inlet/process Outlet/inst. Drain/bleed/test Test/ Process Test/

drain drain
HD*5MCP 1/2” NPT Flanged 1/4” NPT Standard

Five valve manifold

HFS5
suitable for direct mounting to differential pressure transmitters with 54mm/2.125” mounting centres. Process/inlet
connections are via standard kidney flange ovals/futbol. Manifold supplied with instrument mounting bolts and
PTFE seals. 85.8
(3.38”)
178.1
(7.01”)
HFS5
95.4
(3.76”)
187.4.1 30.0
(7.38”) (1.18”)
HFS5
HFS58N

Test/ Process Test/
HF*5 Flanged Flanged 1/4” NPT drain drain
Five valve manifold
3 & 5 Valve
Manifolds
Compact cast body design suitable for direct mounting to differential pressure transmitters with 54mm/2.125”
HFS58N
mounting centres. Manifold supplied with instrument mounting bolts and PTFE seals.
85.8
(3.38”)
178.1
(7.01”)
95.4
(3.76”)
187.4 30.0
(7.38”) (1.18”)
67.0
(2.64”)
HFS58N
Part No. Inlet/process Outlet/inst. Drain/bleed/test Test/ Process Test/

drain drain
HF*58N 1/2” NPT Flanged 1/4” NPT Standard


centres. Process/inlet connections are via standard kidney flange ovals/futbol. Manifold supplied with instrument
mounting bolts and PTFE seals. Optional rising plug valve with HEF*5CT
6.4mm (1/4") straight through flow pattern for
isolating position available (see CAT 4190HV page 126 & 127 for full specification details).
62.0
(2.44”)
96.4
(3.80”)
98.5 31.8
(3.88”) (1.25”)
200.1 97.7
(7.88”) (3.85”)
HEF*5CT
HEF*5CT
HEF*58NCT
Part No. Inlet/process Outlet/inst. Drain/bleed/test Process Drain Process Test/ Process Test/
drain drain
HEF*5CT Flanged Flanged 1/4” NPT
Standard Option

3 & 5 Valve
Manifolds
Compact design for direct mounting to differential pressure transmitters with 54mm/2.125” centres, supplied with
instrument mounting bolts and PTFE seals. Optional rising plug valve with 6.4mm (1/4") straight through flow
pattern for isolating position available (see CAT 4190HV page 126HEF*58NCT
& 127 for full specification details).
62.0
(2.44”)
101.6
(4.00”)
98.5 31.8
(3.88”) (1.25”)
200.1 82.6
(7.88”) (3.25”)
HEF*58NCT
Part No. Inlet/process Outlet/inst. Drain/bleed/test Process Drain Process Test/ Process Test/
drain drain
HEF*58NCT 1/2” NPT Flanged 1/4” NPT Standard Option

Five valve manifold

Compact design manifold for remote installation from differential pressure transmitters. Optional custody
transfer/fiscal metering available.
HL*5M
63.5
(2.50”)
54.0
(2.125”)
120.0 28.6
(4.72”) (1.13”)
221.6 79.4
(8.72”) (3.13”)
HL*5M
HL*5MHP
HL*5M
HL*5M
Part No. Inlet/process Outlet/inst. Drain/bleed/test Test/ Process Test/ Process Drain Process
drain drain
HL*5M 1/2” NPT 1/2” NPT 1/4” NPT Standard Option
Five valve manifold for 10,000 psig (689 barg)
3 & 5 Valve
Manifolds
Compact design manifold for remote installation from differential pressure transmitters. Standard inlet, outlet and
test/bleed connections in NPT.
HL*5MHP
HL*5MHP
76.2
(3.00”)
54.0
(2.125”)
132.0 31.8
(5.20”) (1.25”)
233.6 82.6
(9.20”) (3.25”)
HL*5MHP

Test/ Process Test/
HL*5MHP 1/2” NPT 1/2” NPT 1/4” NPT drain drain


Purpose
It is essential to fully support impulse/pressure measurement tubing lines, manifolds and instruments. All Parker
manifolds are designed to accommodate bracket mounting and support, a full range of brackets with additional
U bolts are available.
Brackets are designed for panel and wall mounting and give full clearance for ease of handle operation. They are
also suitable for vertical and horizontal positioning on 2” pipe-stand.
Standard brackets are produced from 4mm thick carbon steel plate to provide maximum rigidity and support. For
full corrosion protection the brackets are shot blasted and zinc sprayed. Alternative bracket material is available
upon request.
BKT2CS BKT5CS
Part No. BKT5CS Simple to install bracket on horizontal or vertical 2” standpipe.
Designed for horizontal or vertical mounting of manifold giving total
Sutable for:- installation flexibility.
35.0
HD*5 (1.38”)
HD*5CT
71.0
(2.80”) 145.0
(5.71”)
71.0 10.0
(2.80”) (0.39”)
For ‘U’ bolts suffix 90.0
part no. with B (3.54”)
Example BKT5CSB BKT5CS

3 & 5 Valve
Manifolds
For manifold/bracket bolts add ‘bolt set’ suffix from matrix. Example: Bracket, ‘U’ bolts and manifold/bracket bolts
BKT5CSB6 (suitable for HD*5).
Part No. BKT2CS Universal manifold mounting bracket

BKT2CS suitable for all remote mount
BKT5CS
manifolds. This bracket allows 90 degree positioning enabling total
Sutable for the above and:- installation flexibility and prevents handle obstruction. Can be wall,
HL*3M standpipe or base mounted.
HL*3MHP
HL*3MDTP 30.0
(1.18”)
HL*5M
HL*5HP
90.0 71.0
(3.54”) (2.80”)
71.0
(2.80”)
90.0
(3.54”)
BKT2CS
For ‘U’ bolts suffix part no. with B
Example BKT2CSB
For manifold/bracket bolts add ‘bolt set’ suffix from matrix. Example: Bracket, ‘U’ bolts and manifold/bracket bolts
BKT2CSB5 (suitable for HL*3M).

Manifold bracket support BKT3CS

Part No. BKT3CS BKT3CS Universal manifold mounting bracket suitable for direct mount
manifolds. This bracket design enables horizontal or vertical
Sutable for:- 35.0 instrument positioning. Suitable for 2” standpipe.
(1.38”)
HD*3M
HD*3MDTP
HD*3
HD*3MFF
HD*3MCP 71.0
(2.80”) 145.0
(5.71”)
HD*5M
HD*5MFF
HD*5MCP
71.0 10.0
(2.80”) (0.39”)
For ‘U’ bolts suffix 90.0
(3.54”)
part no. with B For manifold/bracket bolts add ‘bolt set’ suffix from matrix. Example:
Example BKT3CSB BKT3CS
Bracket, ‘U’ bolts and manifold/bracket bolts BKT3CSB2 (suitable for
BKT4CS HD*5M).
Part No. BKT4CS For extruded style manifold blocks providing full base support for
BKT4CS horizontal or vertical fixing to 2” standpipe.
Sutable for:- 67.0
(2.64”)
HEF*38N
HEF*3
HEF*58NCT
HEF*5CT
120.0
For ‘U’ bolts suffix
3 & 5 Valve
(4.72”)
Manifolds
71.0
(2.80”)
part no. with B
Example BKT4CSB
71.0
(2.80”) BKT4CS
90.0
(3.54”)
For manifold/bracket bolts add ‘bolt set’ suffix from matrix. Example: Bracket, ‘U’ bolts and manifold/bracket
bolts BKT4CSB4 (suitable for HEF*3).
‘U’ Bolt with nuts and washers Manifold/bracket bolts

for 2” NB standpipe c/w nuts and washers
Manifold Part No. Bolting Set Part No. Suffix
Part No. UBACS HL*3M M8 x 45 Bolt + Nuts BS5 5
HL*3MDTP M8 x 45 Bolt + Nuts BS5 5
HL*3MHP M8 x 45 Bolt + Nuts BS5 5
BKT3CS HL*5M M8 x 45 Bolt + Nuts BS5 5
HL*5MCT M8 x 45 Bolt + Nuts BS5 5
HL*5MHP M8 x 45 Bolt + Nuts BS5 5
HD*3M M10 x 14 Bolt BS2 2
HD*3MDTP M10 x 14 Bolt BS2 2
HD*3MFF M10 x 14 Bolt BS2 2
HD*3MCP M10 x 14 Bolt BS2 2
HD*3 M10 x 14 Bolt BS2 2
85mm
HD*5M M10 x 14 Bolt BS2 2
(3.35") HD*5MFF M10 x 14 Bolt BS2 2
HD*5MCP M10 x 14 Bolt BS2 2
HD*5CT M6 x 14 Bolt BS6 6
HD*5 M6 x 14 Bolt BS6 6
HEF*38N M6 x 45 Bolt + Nuts BS4 4
HEF*3 M6 x 45 Bolt + Nuts BS4 4
HEFS58NCT M6 x 45 Bolt + Nuts BS4 4
HEFS5CT M6 x 45 Bolt + Nuts BS4 4
All nut and bolt sets are standard in Carbon Steel

PTFree connect™
Manifold connections
Many users continually desire the elimination of taper threads and their associated sealant.
The PTFree connect system enables users to assemble tube lines to any of the manifold ports without the need for
PTFE tape or other liquid sealant.
The PTFree connection can be applied to any of the manifold featured in this catalogue. These will be factory fitted,
pin locked and pressure tested.
PTFree connect enables angled tube connections to be swivelled until the optimum tube alignment position has been
achieved. Assembly to the tube connector is achieved by tightening the standpipe nut one-quarter turn from the finger
tight position.
Manifolds can also be supplied with male connectors using the same thread form as the PTFree connect. They can
be provided factory fitted, pin locked and tested before they leave our manufacturing plant.
Some size restrictions may be necessary due to the close proximity of some connections and the across flat hexagon
dimensions, as a guide PTFree connect for inlet and outlet can be up to 1/2" or 12mm o/d., drain/bleed connections
should be restricted to 1/4" or 6mm. For PTFree male connectors inlet and outlet should be restricted to 3/8" or 10mm
and 1/4" or 6mm o/d for drain/bleed.
3 & 5 Valve
Manifolds
AA A A
AA
A = 29.70mm (1.17") 6mm/1/4" tube A = 31.50mm (1.25") 6mm/1/4" tube

A = 35.00mm (1.38") 10mm tube A = 36.60mm (1.44") 10mm tube
A = 35.00mm (1.38") 3/8" tube A = 36.60mm (1.44") 3/8" tube
PTFree connect PTFree male connectors

(Code FRC) (Code FRCM)
Part Number Construction Examples
Inlet, Outlet, Drain/vent/test, tube size/thread size & form
Manifold Connection Style A-LOK(L) or Metric or inch
Inlet (E) + size Outlet (X) + size Drain/vent/test
Part No. + option FRC or FRCM CPI(B) L or B tube M or I
HDS5M FRC L M E12 Flanged D6
Part No. HDS5MFRCLME12D6 = 5 valve direct mount manifold with A-LOK PTFree connect™ Inlet - 12mm o.d., Outlet Flanged,
Drain/test - 6mm. Stainless steel construction
HLS3M FRC B I E6 X6 –
Part No. HLS3MFRCBIE6X6 = 3 valve remote manifold with CPI PTFree connect™ Inlet - 3/8” o.d., Outlet 3/8 o.d.
Stainless steel construction


For full material specification see technical
section HD*3M HL*3M HEF*38N HF*38N ML*3V4N
HD*3 HD*3MCP HEF*3 HF*3
*Insert code
for selected
Material HD*3EXT HD*3MFF
material in
part number
Stainless steel Std S 3 3 3 CAST 3

Monel M 3 3 3
Duplex D1 3 3 3
Hasteloy HC 3 3 3
Carbon Steel C 3 3 3
6Mo 6MO 3 3 3
Titanium T 3 3 3
Incoloy 825 825 3 3 3
Inconel 625 625 3 3 3
3 & 5 Valve
Manifolds
Manifold types
HD*5 HD*5CT HF*58N HEF*58NCT HD*5MFF
HD*5M HL*5 HF*5 HEF*5CT HD*5MCP
*Insert code
for selected
Material HD*5EXT HL*5M
material in
part number
Stainless steel Std S 3 3 CAST 3 3

Monel M 3 3 3
Duplex D1 3 3 3
Hasteloy HC 3 3 3
Carbon Steel C 3 3 3 3
6Mo 6MO 3 3 3
Titanium T 3 3 3
Incoloy 825 825 3 3 3
Inconel 625 625 3 3 3

Options for three valve manifolds Manifold part nos.

Page 128 128 129
Suffix adding
HD*3M+DTP
sequence
HD*3EXT
Part no.
HD*3
Function Read Option Detail
suffix
1 Gland packing Graphoil 3 3 3 3

2 Seating PCTFE tip 9 3 3 3
PEEK tip PK 3 3 3
Note 1 Roddable/rising plug, PTFE packed RP
Stellite Tip ST 3 3 3
3 Optional connections Note 2 Purge ports 1/4 NPT UPP* 3 3 3
Note 2 Test ports 1/4 NPT DTP* 3 3 3
4 Blank plugs Hexagon plugs 1/4 NPT (loose in box) P 3 3 3
5 Connection Note 3 Socket weld (* insert pipe size) SW*NB 3 3 3
Butt weld (* insert pipe size) BW*NB 3 3 3
BSPT (* insert thread size e.g. 8K = 1/2”) *K 3 3 3
Note 4 BSPP (* insert thread size e.g. 8R = 1/2”) *R 3 3 3
Inverted connections A-LOK/CPI *A/*Z
PTFree connect (see page 142) 3 3 3
Note 5 DIN 19213 instrument seal grooves DIN** 3 3 3
6 Operating mechanism Lockable ‘T’ Bar THL 3 3 3
(see page 125 for Anti tamper spindle AT 3 3 3
3 & 5 Valve
Manifolds
functional definition) Anti tamper spindle + key ATK 3 3 3

Handwheel HW 3 3 3
Lockable handwheel LHW 3 3 3
7 Mounting Note 6 Assembled to bracket BRK 3 3 3
56mm centres 56 3 3 3
57mm centres 57 3 3 3
Stainless steel mounting bolts 7/16 UNF SSB 3 3 3
M10 x 1.5 C.S. mounting bolts CSB10 3 3 3
M10 x 1.5 stainless steel mounting bolts SSB10 3 3 3
8 Condition NACE (latest issue) NACE 3 3 3
Cleaned and lubricated for oxygen use OXY 3 3 3
Firesafe design FS
Note 7 Heat code trace certificates HCT 3 3 3
Test certificates TC 3 3 3
Air testing PT 3 3 3
Note 1 Seat material RP = standard acetal, RP9 = PTCFE, RPPK = PEEK.

Note 2 *Specify face F = front, T = top, B = base, S = side (check viability of size and position with sales).
Note 3 For tube socket use 1/16” denominations (i.e. 8 = 1/2”) and change NB to TB.
For metric tube size use actual metric (mm) dimensions e.g. SW12MMTB.
Note 4 For test/purge connections in BSPP these will, due to sealing face requirements be limited to 1/8” as standard.
Note 5 **Insert seal type B1, B2, or B3.
Note 6 Bracket will include ‘U’ bolts and manifold/bracket bolts.
Note 7 Heat code traceable certificates for body and bonnet.

Manifold part nos.

129 130 130 131 131 132 133 133
HL*3M+DTP+HP
MLS3V4N
HEF*38N
HD*3CP
HF*38N
HD*3FF
HEF*3
HF*3
Option Detail
3 3 3 3 3 3 3 Graphoil
3 3 3 3 3 3 3 PCTFE tip
3 3 3 3 3 3 3 PEEK tip
3 Roddable/rising plug, PTFE packed
3 3 3 3 3 3 3 Stellite Tip
3 3 3 3 3 3 3 Purge ports 1/4 NPT
3 3 3 3 3 3 3 Test ports 1/4 NPT
3 3 3 3 3 3 3 Hexagon plugs 1/4 NPT (loose in box)
3 3 3 3 Socket weld (* insert pipe size)
3 3 3 3 Butt weld (* insert pipe size)
3 3 3 3 BSPT (* insert thread size e.g. BK = 1/2”)
3 3 3 3 BSPP (* insert thread size e.g. 8R = 1/2”)
3 3 Inverted connections A-LOK/CPI
3 3 3 3 PTFree connect (see page 142)
3 3 3 3 DIN 19213 instrument seal grooves
3 3 3 3 3 3 3 Lockable ‘T’ Bar
3 3 3 3 3 3 3 Anti tamper spindle
3 & 5 Valve
Manifolds
3 3 3 3 3 3 3 Anti tamper spindle + key
3 3 3 3 3 3 3 Handwheel
3 3 3 3 3 3 3 Lockable handwheel
3 3 3 3 3 3 3 Assembled to bracket
3 3 3 3 3 3 56mm centres
3 3 3 3 3 3 57mm centres
3 3 3 3 3 3 Stainless steel mounting bolts 7/16 UNF
3 3 3 3 3 M10 x 1.5 C.S. mounting bolts
3 3 3 3 3 M10 x 1.5 stainless steel mounting bolts
3 3 3 3 3 3 3 3 NACE (latest issue)
3 Firesafe design
3 3 3 3 3 3 3 3 Air testing
Accessories and spares Description Part number Box quantity
PTFE manifold/instrument seals HKITPTFESEALS 2
*Insert 9 PCTFE seat Graphite manifold/instrument seals HKITGRAPHOILSEALS 2
*Insert PK PEEK seat Isolate valve with PTFE gland, metal seat HBNTS*ISPTFE/3 3
Drain/bleed valve with PTFE gland, metal seat HBNTS*DRPTFE/3 3
Equalize valve with PTFE gland, metal seat HBNTS*EQPTFE/3 3
Isolate valve with graphoil gland, metal seat HBNTSISGRAP/3 3
Drain/bleed valve with graphoil gland, metal seat HBNTSDRGRAP/3 3
Equalize valve with graphoil gland, metal seat HBNTSEQGRAP/3 3

Options for three valve manifolds Manifold

Manifoldpart
partnos.
nos.
Page 134 134 135
Suffix adding
HD*3M+DTP
sequence
HD*3EXT
Part no.
HD*3
Function
Function Read
Read Option
OptionDetail
Detail
suffix
11 Gland
Glandpacking
packing Graphoil
Graphoil 33 33 33 33
22 Seating
Seating PCTFEtip
PCTFE tip(not HP) 99 33 33 33
PEEKtip
PEEK tip PK
PK 33 33 33
Note11
Note Roddable/rising
Roddable plug,PTFE
rising plug, PTFEpacked
packed RPRP
StelliteTip
Stellite Tip ST
ST 33 33 33
33 Optional
Optionalconnections
connections Note22
Note Purge ports
Upstream 1/4 ports
purge NPT 1/4 NPT UPP*
UPP* 33 33 33
Note22
Note Test ports 1/4
Downstream NPT
test ports 1/4 NPT DTP*
DTP* 3 3 3
44 Plugs
Blank plugs Hexagon
Blank plugs plugs 1/4 NPT
1/4 NPT (loose(loose in box)
in box) PP 33 33 33
55 Connection
Connection Note33
Note Socketweld
Socket weld(*(*insert
insertpipe
pipesize)
size) SW*NB
SW*NB 33 33 3
Buttweld
Butt weld(*(*insert
insertpipe
pipesize)
size) BW*NB
BW*NB 33 33 3
BSPT(*(*insert
BSPT insertthread
threadsize
sizee.g.
e.g.8K
8K==1/2”)
1/2”) *K
*K 33 33 3
Note44
Note BSPP(*(*insert
BSPP insertthread
threadsize
sizee.g.
e.g.8R
8R==1/2”)
1/2”) *R
*R 33 33 3
Invertedconnections
Inverted connectionsA-LOK/CPI
A-LOK/CPI *A/*Z
*A/*Z
PTFreeconnect
PTFree connect(see (seepage
page22) 142) 33 33 33
Note55
Note DIN19213
DIN 19213instrument
instrumentseal sealgrooves
grooves DIN**
DIN** 33 33 33
66 Operating
Operatingmechanism
mechanism Lockable‘T’
Lockable ‘T’Bar
Bar THL
THL 33 33 33
(seepage
(see page5125
for for Antitamper
Anti tamperspindle
spindle AT
AT 33 33 33
3 & 5 Valve
Manifolds
functionaldefinition)
functional definition) Antitamper
Anti tamperspindle
spindle++key key ATK
ATK 33 33 33
Handwheel
Handwheel HW
HW 33 33 33
Lockablehandwheel
Lockable handwheel LHW
LHW 33 33 33
77 Mounting
Mounting Note66
Note Assembledtotobracket
Assembled bracket BRK
BRK 33 33 33
56mmcentres
56mm centres 56
56 33 33 3
57mmcentres
57mm centres 57
57 33 33 3
Stainlesssteel
Stainless steelmounting
mountingbolts bolts7/16
7/16UNF
UNF SSB
SSB 33 33 33
M10xx1.5
M10 1.5C.S.
C.S.mounting
mountingboltsbolts CSB10
CSB10 33 33 33
M10xx1.5
M10 1.5stainless
stainlesssteel
steelmounting
mountingbolts
bolts SSB10
SSB10 33 33 33
88 Condition
Condition NACE(latest
NACE (latestissue)
issue) NACE
NACE 33 33 33
Cleanedand
Cleaned andlubricated
lubricatedfor foroxygen
oxygenuse
use OXY
OXY 33 33 33
Firesafe design
Firesafe FS
FS 3 3 3
Note77
Note Heatcode
Heat codetrace
tracecertificates
certificates HCT
HCT 33 33 33
Testcertificates
Test certificates TC
TC 33 33 33
Airtesting
Air testing PT
PT 33 33 33
Note 1 Seat material RP = standard acetal, RP9 = PTCFE, RPPK = PEEK.

Note 2 *Specify face F = front, T = top, B = base, S = side (check viability of size and position with sales).
Note 3 For tube socket use 1/16” denominations (i.e. 8 = 1/2”) and change NB to TB.
For metric tube size use actual metric (mm) dimensions e.g. SW12MMTB.
Note 4 For test/purge connections in BSPP these will, due to sealing face requirements be limited to 1/8” as standard.
Note 5 **Insert seal type B1, B2, or B3.
Note 6 Bracket will include ‘U’ bolts and manifold/bracket bolts.
Note 7 Heat code traceable certificates for body and bonnet.
24
146
Parker Hannifin Ltd
Parker Hannifin Corporation
Instrumentation Group
Manifold part nos.

135 136 136 137 137 138 138 139
HEF*58NCT
HL*5M+HP
HD*5MCP
HD*5EXT
HEF*5CT
HD*5CT
HF*58N
HF*5 Option Detail
3 3 3 3 3 3 3 3 Graphoil
3 3 3 3 3 3 3 3 PCTFE tip
3 3 3 3 3 3 3 3 PEEK tip
3 3 Roddable/rising plug, PTFE packed
3 3 3 3 3 3 3 3 Stellite Tip
3 3 3 3 3 3 3 3 Purge ports 1/4 NPT
3 3 3 Test ports 1/4 NPT
3 3 3 3 3 3 3 3 Hexagon plugs 1/4 NPT (loose in box)
3 3 3 3 3 3 Socket weld (* insert pipe size)
3 3 3 3 3 3 Butt weld (* insert pipe size)
3 3 3 3 3 3 BSPT (* insert thread size e.g. BK = 1/2”)
3 3 3 3 3 3 BSPP (* insert thread size e.g. 8R = 1/2”)
3 3 3 Inverted connections A-LOK/CPI
3 3 3 3 3 3 PTFree connect (see page 142)
3 3 3 3 3 DIN 19213 instrument seal grooves
3 3 3 3 3 3 3 3 Lockable ‘T’ Bar
3 3 3 3 3 3 3 3 Anti tamper spindle
3 & 5 Valve
Manifolds
3 3 3 3 3 3 3 3 Anti tamper spindle + key
3 3 3 3 3 3 3 3 Handwheel
3 3 3 3 3 3 3 3 Lockable handwheel
3 3 3 3 3 3 3 3 Assembled to bracket
3 3 3 3 3 3 56mm centres
3 3 3 3 3 3 57mm centres
3 3 3 3 3 3 3 Stainless steel mounting bolts 7/16 UNF
3 3 3 3 3 3 3 M10 x 1.5 C.S. mounting bolts
3 3 3 3 3 3 3 M10 x 1.5 stainless steel mounting bolts
3 3 3 3 3 3 3 3 NACE (latest issue)
3 Firesafe design
3 3 3 3 3 3 3 3 Air testing
Accessories and spares Description Part number Box quantity
PTFE manifold/instrument seals HKITPTFESEALS 2
*Insert 9 PCTFE seat Graphite manifold/instrument seals HKITGRAPHOILSEALS 2
*Insert PK PEEK seat Isolate valve with PTFE gland, metal seat HBNTS*ISPTFE/3 3
Drain/bleed valve with PTFE gland, metal seat HBNTS*DRPTFE/3 3
Equalize valve with PTFE gland, metal seat HBNTS*EQPTFE/3 3
Isolate valve with graphoil gland, metal seat HBNTSISGRAP/3 3
Drain/bleed valve with graphoil gland, metal seat HBNTSDRGRAP/3 3
Equalize valve with graphoil gland, metal seat HBNTSEQGRAP/3 3

‘H’ Series Compact
Distribution Manifold
Series HCDM
Cat 4190-DM
Product Description
Compact distribution manifold unit offering choice of 5 or 10 metal seated needle valves with PTFE gland
packing. ‘H’ series head assemblies for easy operation and positive bubble tight shut off.
Features
• Number of valves: 5 or 10 (between 5 & 10 will be • Main inlet: 1/2” female pipe thread.
supplied as 10 way - redundant outlets can be • Main outlets: 1/2” female pipe thread.
plugged by user).
• Distribution outlets: 1/4” female pipe thread.
• Valve style: Globe style needle valve metal/metal
seat with retained operating key.
As standard, 2 connections (one at each end of common size) will be provided. One of these will be utilised by
the user as an inlet, the other can be either blanked off or fitted with a valve to facilitate purging, should a purge
valve be required then the style should be clearly stated at enquiry stage.
We can connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally
isolate all the outlet valves from the supply point. Such a requirement must be stated separately at enquiry stage,
the valve style should be clearly specified.
These additional valve requirements will be structured into the part number at quotation stage.
Specifications:
Mounting holes dia: 6.5mm (1/4”). Pressure rating: Max. 6,000 psi (414 bar).
Temperature rating: Max. 260°C (500°F). Materials: AISI 316 stainless steel.
Distribution
Lead times: Max. up to 4 weeks. Minimum quantity: 5 off.
Manifolds
Part number construction:
H C D M S 10
Options
K - BSPT threads 3 - Grafoil packing
Material R - BSPP threads 9 - Kel-F tips (3,000 psi MWP)
NC - Nace AT - Supplied with anti-tamper bonnets
No. of ports PK - Peek tips and loose operating key
5 or 10

Hi-Pro
Distribution Manifold
Series HPDM
Cat 4190-HPDM
Product Description
High Pressure Modular Distribution Manifold with up to 20 Parker Hi-Pro ball valve outlets.
Features • Minimum size main inlet: 1/4” female pipe

• Maximum number of valves: 20 (even numbers thread/tube or pipe socket weld.
only - spare valves can be blanked off). • Maximum size main outlet: 1” pipe thread, 2”
• Valve style: Hi-Pro Ball style (10mm bore). socket weld, 2” flange.
• Maximum size main inlet: 1” pipe thread, • Minimum size main outlets: 1/4” female pipe
2” socket weld, 2” flange. thread/tube or pipe socket weld.
As standard, 2 connections (one at each end) will be provided. One of these will be utilised by the user as an inlet,
the other can be either blanked off or fitted with a valve to facilitate purging, should a purge valve be required then
the style should be clearly stated at enquiry stage.
We can connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally isolate
all the outlet valves from the supply point. Such a requirement must be stated separately at enquiry stage, the valve
style should be clearly specified.
These additional valve requirements will be structured into the part number at quotation stage.
Specifications:
Mounting/support: Standard wall mounting (also permits Materials: AISI 316 St. St.
mounting to a 2” NB pipe stand. Options: All valve options listed in CAT 4190 HBV
Pressure rating: Max. 6000 psig (414 barg) for valves - can be supplied.
tube/Pipe size to be designated by customer. Lead times: Max. up to 4 weeks.
Distribution
Manifolds
Temperature rating: Refer to CAT 4190HBV for P/T graph.
Part number construction:

No of Main in (A) Distribution Style Example part number: HPDMB2016F1508N4N
Series Material Style (A & B)
Valves out (B) Conns. (C) Female Description: Manifold (HPDM) produced in 316
HPDM 316 SS-B 4-20 1/2”-8 FNPT-N 1/4”-4 NPT-N stainless steel (B) complete with 20 ball valves
3/4”-12 BSPT-K 3.8”-6 BSPT-K (20) with 1” (16) flange spiral raised face (F) class
1”-16 BSPP-R 1/2”-8 BSPP-R 150 (150) main inlet, 1/2” (8) NPT (N) female main
1 1/2”-24 Pipe socket weld SWNB 3/4”-12 outlet, 20 x 1/4” (4) NPT (N) female ball valve
2”-32 Tubesocket weld SWTB 1”-16 distribution outlets.
Flange (see note 2)
Note 1: When main outlet is different size to main inlet then add main outlet designator after main inlet designator.
Note 2: When flange connection required use the part no. designators in the Flange catalogue CAT 4190 FP for flange face and class.

Hi-Check 10mm Bore
Non-Return Valve
(316 Stainless steel, Duplex and Monel)
6,000 psi/414 bar, 10,000 psi/689 bar
Product Description
These high performance non-return valves can offer the user a cold working pressure rating up to 10,000 psi/
689 bar maximum, with a cracking pressure of 10 psi maximum.
By offering a true two piece design, body leakage paths are kept to a minimum.
With the added opportunity to select integral compression ends the user can eliminate the use of taper threads
and thread sealant. This avoids system contamination, reduces potential leakage paths, weight, space and
installation costs.
Features Specifications:
• Two-piece metal seated body design - minimal Cold Working Pressure Ratings
leakage paths. • 6,000 psi (414 bar) & 10,000 psi (689 bar).
• 4:1 Pressure boundary designed safety factor. Temperature Rating:
• Designed to meet pressure and temperature Material Temperatures limited to working temperatures
requirements of ANSI/ASME B.16.34, as limited by of seals below:
the seat materials.
6,000 psi (414 bar)
• Nitrile, Fluorocarbon, EPR and Highly Fluorinated
Fluorocarbon Rubber seat materials available. • Fluorocarbon -15°F to 400°F (-26°C to 204°C).
• Available with A-lok compression ends. • Nitrile -30°F to 275°F (-34°C to 135°C).
• Factory tested - all units fully hydrostatically tested • Ethylene Propylene Rubber -70°F to 275°F (-57°C to
to 1.5 x maximum working presure. 135°C).
• Connector thread environmentally sealed. • Highly Fluorinated Fluorocarbon Rubber -15°F to
200°F (-26°C to 93°C).
• NACE MR 01 75/ISO 15156 compliant materials
Distribution
10,000 psi (689 bar) Option
Manifolds
available.
• Self-centering Seal. • Fluorocarbon V1238-95 -15°F to 400°F (-26°C to
204°C).
• Low noise.
• Highly Fluorinated Fluorocarbon Rubber -15°F to
• Rugged Design - Threads not in contact with media. 200°F (-26°C to 93°C).
• Zero coil bounding check spring. Crack and Re-seal
• Explosive decompression/extrusion resistance • Cracking Pressure: <10 psi (0.69 bar).
O-rings for high pressure applications. • Re-seal Pressure: <50 psi (3.45 bar).
• Optional secured locking connector. Re-seal pressure is defined as the upstream pressure
at which the non-return valve closes bubble-tight.
Note: Hi-check non-return valves which are not
actuated for a period of time, may initially crack at a
higher pressure than the above cracking pressure
listed.
Cv: 1.54
Cat 4190 CV

6
7 Item Description A 38.1 (1.50”)
8 A/F HEX.
1 Connector
2 E-seal™
5
3 Joint Seal
4 Body 44.0 (1.73”)
A/C
5 Spring Support
6 Spring
7 Poppet 31.8 (1.25”)
A/F HEX.
1 3 4
2 8 O-ring

6000 psig 10,000 psig Female Female A mm (inch) Material *Insert Available Options Part number suffix
(414 barg) (689 barg)
316 Stainless Steel B NACE NC
HCY*4FF-# HCY*4FFHP-# 1/4” NPT 1/4” NPT 74.7 (2.94)
Duplex E Secured end
HCY*6FF-# HCY*6FFHP-# 3/8” NPT 3/8” NPT 79.7 (3.14) LC
Monel D connector
HCY*8FF-# HCY*8FFHP-# 1/2” NPT 1/2” NPT 87.9 (3.46) Above options to be inserted prior to
6000 psig 10,000 psig Male Female A mm (inch) O-ring suffix
(414 barg) (689 barg) O-Ring Suffix # Compound
6000 psig (414 barg) Options Example ‘HCYB8FFHPNC-ED’
HCY*4M4F-# HCY*4M4FHP-# 1/4” NPT 1/4” NPT 89.7 (3.53) Hi-Check 10mm 316 St.Stl 1/2” NPT
Fluorocarbon Rubber
HCY*8M8F-# HCY*8M8FHP-# 1/2” NPT 1/2” NPT 97.9 (3.90) FC (FEM) 10,000 psi NACE with
FPM 75
Fluorocarbon V1238-95 rubber
6000 psig 10,000 psig A-LOK® A-LOK® A mm (inch) BN Nitrile
(414 barg) (689 barg)
Ethylene Propylene
HCY*4A-# HCY*4AHP-# 1/4” OD 1/4” OD 106.8 (4.20) EP
Rubber
HCY*6A-# HCY*6AHP-# 3/8” OD 3/8” OD 107.3 (4.23) Fluorocarbon Rubber
ED
HCY*8A-# HCY*8AHP-# 1/2” OD 1/2” OD 113.7 (4.48) V1238-95
HCY*M6A-# HCY*M6AHP-# 6mm OD 6mm OD 106.8 (4.20) KZ Highly Fluorinated

Fluorocarbon Seal
HCY*M10A-# HCY*M10AHP-# 10mm OD 10mm OD 107.8 (4.25)
O-Ring # Suffix # Compound
HCY*M12A-# HCY*M12AHP-# 12mm OD 12mm OD 113.7 (4.48) 10,000 psig (689 barg) Options
*Insert material code - select from material matrix (B = Standard 316 Stainless Steel) Fluorocarbon Rubber
ED
# O-ring code - select from O-ring compound matrix V1238-95
For CPI™ change A to Z. “A” Dimensions given for A-LOK® are finger tight. KZ Highly Fluorinated
NACE only available on Pipe Thread Connections. Fluorocarbon Seal
For Compression ended valve pressures consult tube rating table.
Pressure vs. Temperature

Nitrile Fluorocarbon Seal
-34 -18 -4 10 24 38 52 66 79 93 107 121 -26 -9 4 18 32 46 60 74 88 102 116 129 143 157 171 185 199 204
7000 483 1000 689
0 620
6000 414 ‘ED’
9000 551
Pressure (psig)
Pressure (psig)
5000 345
Pressure (bar)
Pressure (bar)
8000 483
‘BN’ 7000 414
4000 276
Distribution
6000 345
Manifolds
3000 207 5000 276

‘FC’
2000 138 4000 207
3000 138
1000 69
2000 69
1000
-30 0 25 50 75 100 125 150 175 200 225 250 -15 15 40 65 90 115 140 165 190 215 240 265 290 315 340 365 390 400
Temperature (°F) Temperature (°F)
Ethylene Propylene Seal Highly Fluorinated Fluorocarbon Seal

-57 -43 -29 -15 -1 13 27 41 54 68 82 96 110 124 135 -26 -18 -4 10 24 38 52 66 79 93
7000 483 10000 689
9000 620
6000 414 ‘KZ’
8000 551
Pressure (psig)
Pressure (psig)
5000 345
Pressure (bar)
Pressure (bar)
7000 483
‘EP’ 6000 414
4000 276 ‘KZ’
5000 345
3000 207 4000 276
2000 138 3000 207
2000 138
1000 69
1000 69
-70 -45 -20 5 30 55 80 105 130 155 180 205 230 255 275 -15 0 25 50 75 100 125 150 175 200
Temperature (°F) Temperature (°F)
Note: To determine MPa, multiply bar by 0.1 Key: 6,000 psi 10,000 psi
Cat 4190 CV

Manifold
Accessories
Catalog 4190-FP-ACC
May 2007
Distribution
Manifolds
Flanged Products
Contents
Page 155 Lapped joint tube adaptors (LJ)
Page 156 Flange to compression connectors (FC)
Page 157 Kidney flanges to compression

connectors (KF)
Page 158 Swivel gauge adaptors (SG)

Distribution
Manifolds

Flanged Products
Lapped joint tube adaptors (LJ)

Purpose
For applications involving small flanged process valves with simple conversion to instrument lines.
Series LJ
• 1/2" to 2" N.B. flanges (15 to 50DN). • Full heat code traceability to EN10204-3.1
• 150 to 2500lb flange class. • Integrally machined body, no welding.
• Flange sealing:- • Eliminates additional connections.
Raised face spiral finish. • P.T.F.E tape or liquid thread sealants not
• Standard A-LOK® arrangement required.
1/4" to 1" O.D. (3mm to 25mm O.D.). • Appropriate slipover flanges available.
• Standard CPI™ arrangement • NACE MR 0175 / ISO 15156
1/4" to 1" O.D. (3mm to 25mm O.D.). compliance available on request.
• Standard stainless steel body (316).
• Other materials on application.
Part number construction

Connection Class (to be
Material A-LOK maximum specified when Optional slipover
Distribution
Product code (refer to table below) size 1" / 25mm Flange size slipovers required flanges (SF)
Manifolds
Example 1 LJF B 8A 8 600 SF
Example 2 LJF D M6A 12
For CPI™ change A to Z.

For A-LOK® size codes use the A-LOK® catalogue.
Example 1: LJFB8A8600SF - Stainless steel, 1/2" O.D. A-LOK® tube connection to 1/2" (DN15) pipe flange,
supplied with Class 600 slipover flange.
Example 2: LJFDM6A12 - Monel M400, 6mm O.D. A-LOK® tube connection to 3/4" (DN20) pipe flange.
Flange class must be specified when ordering slipover flange options.

Material
A Carbon Steel A105
A-LOK®/CPI products in Carbon Steel and Low temp B Stainless Steel 316
Carbon Steel will be supplied with 316 nuts and ferrules D Monel M400
E Duplex UNS 31803
A-LOK®/CPI products can not be offered in the F Super Duplex UNS S.32750
G Hastelloy C-276
following materials: H Low Temp. C. St. A350 LF2
E: Duplex UNS 31803 K 6Mo
F: Super Duplex UNS.S.32750 L 825
M Inconel 625

Flanged Products
Flange to compression connectors (FC)

Purpose
One piece integral connectors allow the user to switch from piping flange standards to instrument compression
with minimum cost and added safety. This system eliminates the need for additional connections.
Series FC
• 1/2" to 2" N.B. flanges (15 to 50DN). • Full heat code traceability to EN10204-3.1
• 150 to 2500lb flange class. • Integrally machined body, no welding.
• Flanges to ANSI B16.5. (others available on request) • Eliminates additional connections.
• Standard or inverted A-LOK® arrangements • P.T.F.E tape or liquid thread sealants not
1/4" to 1" O.D. (3mm to 25mm O.D.). required.
• Standard or inverted CPI™ arrangements • Variety of materials available.
1/4" to 1" O.D. (3mm to 25mm O.D.). • NACE MR 0175 / ISO 15156
Distribution
Manifolds
• Flange sealing:- compliance available on request.

Raised face spiral finish.
Ring type joint.
• Standard stainless steel body (316).
• Other materials on application.

Connection
Material A-LOK maximum
Product code (refer to table page 155) size 1" / 25mm Flange size Face style Class
Example 1 FC B 8A 16 F 600
Example 2 FC K M12A 8 T 1500

Example 1: FCB8A16F600 - Stainless steel, 1/2" O.D. A-LOK® tube connection, 1" pipe flange, raised face,
class 600.
Example 2: FCKM12A8T1500 - 6Mo, 12mm O.D. A-LOK® tube connection to 1/2" pipe flange, ring type joint,
class 1500.

Flanged Products
Kidney flanges to compression connectors (KF)

Purpose
Integral A-LOK® twin ferrule connection for simple, easy and safe connection from process measurement impulse
line to instrument or manifold
Series KF
• Rated to 6000psi. • High tensile steel bolts standard.
Max (depending on connection) • Full heat code traceability to EN10204-3.1
• Standard PTFE seal ring. • 1/2" NB Sch.40 to Sch XXS butt weld
• Optional Graphite available. connections available.
• Standard stainless steel body (316). • Offset threads available.
• Standard A-LOK® arrangement • Integrally machined body, no welding.
1/4" to 1/2" (3mm to 12mm). • Eliminates additional connections.
• Standard CPI™ arrangement • P.T.F.E tape or liquid thread sealants not
1/4" to 1/2" (3mm to 12mm). required.
Distribution
Manifolds
• Standard stainless steel body (316). • NACE MR 0175 / ISO 15156
• Other materials on application. compliance available on request.

Connection Stainless steel
Material A-LOK maximum bolts optional Graphite option NACE optional
Product code (refer to table page 155) size 1/2" / 12mm (SSB) (3) (N)
Example 1 KF B 8A – 3 –
Example 2 KF B 8F SSB N

Example 1: KFB8A3 - Stainless steel, 1/2" O.D. A-LOK® tube connection, graphite sealing ring, 2 carbon steel
bolts.
Example 2: KFB8FSSBN - Stainless steel, 1/2" Female NPT thread, P.T.F.E. sealing ring, 2 stainless steel bolts,
complies to NACE.

Flanged Products
Swivel gauge adaptors

Purpose
Parker's range of swivel gauge adaptors have been designed to privide 360° rotational movement enabling
maximum positional orientation of installed gauges and measuring instruments. A fully contained sealing
mechanism ensured total system integrity and offers the user up to 10,000 psig (690 barg) working pressure. Silver
plated swivel nut thread and bearing area prevent threat galling of stainless steel threads and allow trouble free
repeatable re-assembly.
Features
• Silver plated swivel thread and bearing
surface to prevent thread galling and
maximising re-make opportunities.
• Variety of thread options.
• Compact design.
Specification • Fully contained and retained sealing
• 316 Stainless steel standard. mechanism.
• 1/2" NPT male to 1/2" NPT female standard.
• 6,000 psig (414 barg) maximum pressure rating.
4
• Maximum temperatre rating 260°C (500°F).
• Fully heat code traceable. 31.8mm 3
• Height = 66mm (2.60"). (1 1/4") A/F
• A/F1 = 19mm (3/4").
2
A/F2 = 31.8mm (1 1/4").
Options 19mm
(3/4") A/F
• Optional BSPP, BSPT & Metric male/female threads, BSPP
female DIN 16288 spigot* seal outlet arrangement.
* Note: for washers see CAT 4233 page 72 A-LOK®.
• 10,000 psig (689 barg) optional pressure rating. 1
• Graphoil packing for high temperature maximum
538°C (1,000°F). Part description
• NACE MR 0175 / ISO 15156 compliance available on request. Item Description
Distribution
Manifolds
• Heat code traceable certification. 1 Inlet connector

• Other materials on application. 2 Swivel nut
3 Seal
4 Gauge outlet connector

Inlet Outlet
Material connection connection Graphoil option High pressure NACE optional
Product code (refer to table page 155) NPT standard NPT standard (3) option (HP) (N)
Example 1 SG B 8M 8F 3 HP –
Example 2 SG B 6M 8F N
For male outlet change F to M.

For BSPP suffix M and/or F with R.
For BSPT suffix M and/or F with K.
For DIN 16288 spigot seal suffix F with RDIN.
Example 1: Stainless steel 1/2" NPT male inlet, 1/2" NPT female outlet, with graphoil seal and 10,000 psi (689
bar) rating.
Example 2: Stainless steel 3/8" NPT male inlet, 1/2" NPT female outlet, with P.T.F.E. (standard) and in accordance
with NACE requirements.

Instrument
Enclosures,
Cabinets and
Shelters
Catalogue 4190-ENC
January 2007
Enclosures
Instrument Enclosures, Cabinets and Shelters
Introduction
Parker Instrumentation provide a range of rugged enclosures for field-mounted process instruments. Three sizes of
enclosures are available for housing one, two or three process instruments. These enclosures are supported by an
assembly service that will provide them ready for field use - with manifold and tubing connections for pressure, flow,
temperature or other common process variable instruments, and any accessories required. Together, the enclosures
and support service provides users with a means of simplifying instrumentation projects.
Three enclosure sizes in the new PES range are available: with widths of 49, 58 or 69cm - offering mounting space
suitable for one, two or three instruments/transmitters respectively, plus a manifold and connections to the
instrumentation tubing, and an electrical heating element or steam heat tubing.
The CPS enclosures are fabricated from tough GRP (glass reinforced polyester). Each size variant employs the same
basic design with hinges that allow the top to open extensively, providing complete access from the front right down
to the floorline, as well as excellent access from both sides and above - for easy commissioning and maintenance.
Process connections may be routed either through the base or the rear of the enclosure - for application flexibility. The
front of the instrument includes a large window made from polycarbonate or laminated glass.
Parker Instrumentation will supply enclosures fully assembled: pre-fitted with a manifold which allows user to simply
bolt the instrument into place, or as a finished unit complete with the instrument (free issued by the customer) and/or
other equipment assembled to the customer's specifications. All commonly required manifold types are available off-
the-shelf, including two-, three- and five way designs.
A wide choice of accessories is available to customise the enclosure for individual applications, including insulation
and a range of explosion-proof heaters - approved to international standards including IP68, NEMA 4X and EEx e ll.
Contents
Page 160 Introduction and Contents
Page 161 Specification
Page 162 Technical Drawings

Enclosures
Page 163 Technical Drawings continued
Page 164 Enclosure Specials/Selection Guide

Specification
Enclosures
Parker instrument enclosures are made of long glass fibre reinforced polyester (GRP) in sheet moulded compound
design.
This high-tech material has many advantages:
• strength that almost matches stainless steel (non-reinforced plastic material has approx. 100 times less stability)
• the weight of stainless steel is 4 times greater

• by increasing wall thickness and optimum fibre alignment the enclosure can be made with extra reinforcing at the edge
• Corrosion-free
• Excellent chemical resistance
Heaters
Parker offers the widest selection of explosion-proof heaters worldwide.
• ATEX/CENELEC approvals for Europe
• CSA/NRTL approvals for America
• GOST approvals for the Russian Federation and many other national certificates, e.g. Japan, Czech Republic etc.
• Providing freeze protection
• Installation in a horizontal or vertical position
• Choice of many different wattages
• Self-limiting or with thermostat in the connection cable allowing for quick and easy installation
• Fully sealed with silicone, protection to IP 68, reliable even in the harshest conditions
• Low thermal stress for long life
• Optional failure alarm
Instrument side, outlet, flange connections: are standard for direct mount manifolds with
machined grooves for PTFE seal rings. Optional DIN sealing groove arrangement are also Functional colour coding:
available. Remote style manifolds are provided as standard with 1/2” NPT female outlet RED = Drain/vent/test
connections (alternative thread forms etc. are available). Flanged outlets are positioned on BLUE = Isolate/block
54mm/2.125” centres. (56/57mm options are available). Manifolds for 3051 style transmitters GREEN = Equalize
are available as standard
Enclosures
Isolate Isolate
Manifold to transmitter mounting: all direct mount Manifold base/bracket mounting: all manifolds are provided with
manifolds are provided with 4 off 7/16 UNF x 1.625” bracket mounting holes. This provides the user with the
high tensile zinc plated carbon steel bolts. Bolt holes opportunity to bracket mount the instrument allowing installation to
are standard on 54mm/2.125” centres. Optional St. take place without the instrument and to give full mounting support
St. bolts are available. in the event of Instrument removal.

Static Gauge and Absolute systems

General View
Dia Box 87 Window
Clasp
Lid Propstay
Temperature
Switch TS (in
cable)
Transmitter
Junction Box Adapter
GRP Mounting 2 Valve Manifold

plate
Mounting MINITHERM
Bracket Conduction heater
Base Plate
Cable Guard ISOPASS

M20x1,5 Insulation adapter
Mounting Hub MH87

(for 2" pipe stand)
Vent Pipe Process Pipe
(buyers scope)
Front view Side view

460 586
Top view
(without cover part)
Hinges
Enclosures
819
Cable Gland
M20x1,5

Differential Pressure Systems

General View Window
Dia Box 87
TAG Label
Clasp
Lid Propstay
Transmitter
5 Valve Manifold
Base Plate
Dummy plug
Mounting Hub MH87

(for 2" pipe stand)
Vent Pipes Process Pipe
(buyers scope)
Front view Side view

460 586
Top view
(without cover part)
Enclosures
819
Cable Gland
M20x1,5

Specials
Parkers full range of Enclosures are complimented with a range of specials that can be requested in addition to the
standard offering such features as multiple installations, different box design, customer specified tube diameters, exotic
materials, customised heater design (up to 160°C electrical and steam), customised temperature controllers and tube
bundles. For any of these options please contact your local Parker Instrumentation sales office or distributor.
Selection Guide
Is base or rear entry

required?
Base Rear
Is the application gauge or Is the application gauge or

differential? differential?
Differential (recommend Coplanar

Gauge Differential (must be H style flange) Gauge
style flange)
Are you quoting In-line or Is internal heating Are you quoting In-line or Is internal heating
flange Style? required? flange Style? required?
Yes No Yes No
Enclosures
Refer to Refer to In-Line Flanged Refer to Refer to

Flanged
drawing drawing (recommend drawing drawing
In-Line (must be H
DS1104 DS1104-NH Coplanar DS1107 DS1107-NH
style flange
style flange)
Is internal heating Is internal heating Is internal heating Is internal heating

required? required? required? required?
No Yes No Yes No Yes No Yes
Refer to Refer to Refer to Refer to Refer to Refer to Refer to Refer to
drawing drawing drawing drawing drawing drawing drawing drawing
DS1102-NH DS1102 DS1101-NH DS1101 DS1105A-NH DS1105A DS1105-NH DS1105

Material specification
data sheet
Maximum working pressure 6000psig (414 barg)
Bul 4190 MS High pressure range 10,000psig (689 barg)
June 2002 P.T.F.E. Packing: 260°C (500°F) Max.
Graphoil packing: 538°C (1000°F) Max.
Material
Item No. Description St.St. Monel Duplex Hastelloy Titanium 6Mo Incoloy Inconel
316 St.St. Duplex UNS Hastelloy
1 Body Monel M400 Titanium GR-2 6Mo Incoloy 825 Inconel 625
ASTM A479 31803 C-276
Duplex UNS Hastelloy Duplex UNS
*2 Tip 17-4PH St.St. Monel K500 Titanium GR-5 Inconel 625 Inconel 718
S.32750/32760 B2 S.32750/32760
3 Joint Seal Monel M400 Titanium GR-2 6Mo Incoloy 825 Inconel 625
ASTM A479 31803 C-276
P.T.F.E. / P.T.F.E. / P.T.F.E. / P.T.F.E. / P.T.F.E. / P.T.F.E. / P.T.F.E. / P.T.F.E. /
4 Packing
Graphoil Graphoil Graphoil Graphoil Graphoil Graphoil Graphoil Graphoil
5 Thrust Bush 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St.
6 Stem Monel M400 Titanium GR-2 6Mo Incoloy 825 Inconel 625
ASTM A479 31803 C-276
Gland 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St.
7
Adjuster ASTM A479 ASTM A479 ASTM A479 ASTM A479 ASTM A479 ASTM A479 ASTM A479 ASTM A479
8 Handle 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St.
9 Grub Screw A4-80 St.St. A4-80 St.St. A4-80 St.St. A4-80 St.St. A4-80 St.St. A4-80 St.St. A4-80 St.St. A4-80 St.St.
LDPE - LDPE - LDPE - LDPE - LDPE - LDPE - LDPE - LDPE -
10 Dust Cap
Coloured Coloured Coloured Coloured Coloured Coloured Coloured Coloured
11 Lock Nut 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St. 316 St.St.
12 Bonnet Monel M400 Titanium GR-2 6Mo Incoloy 825 Inconel 625
ASTM A479 31803 C-276
*Soft tip materials PEEK and PCTFE available for gaseous applications
Visit us on the web at www.parker.com/ipd

Section
Technical
Technical
Section
Monoflange - Table of dimensons

O.D. T No. of Hole Dia. P.C.D. t R L B
Size Class +0.6 / -0.0 +0.5 / -0.0 Holes +0.5 / -0.0 +0.3 / -0.3 +0.3 / -0.3 +0.3 / -0.3 +0.5 / -0.0 +0.5 / -0.0
1/2" N.B. 150 LB 88.90 (3.50") 39.69 (1.56") 4 15.75 (0.62") 60.45 (2.38") 1.59 (0.06") 35.05 (1.38") 60.00 (2.36") 28.58 (1.13")
3/4" N.B. 150 LB 98.55 (3.88") 39.69 (1.56") 4 15.75 (0.62") 69.85 (2.75") 1.59 (0.06") 42.93 (1.69") 60.00 (2.36") 31.75 (1.25")
1" N.B. 150 LB 107.95 (4.25") 39.69 (1.56") 4 15.75 (0.62") 79.25 (3.12") 1.59 (0.06") 50.80 (2.00") 60.00 (2.36") 31.75 (1.25")
1 1/2" N.B. 150 LB 127.00 (5.00") 39.69 (1.56") 4 15.75 (0.62") 98.55 (3.88") 1.59 (0.06") 73.15 (2.88") 67.00 (2.64") 50.80 (2.00")
2" N.B. 150 LB 152.40 (6.00") 39.69 (1.56") 4 19.05 (0.75") 120.65 (4.75") 1.59 (0.06") 91.95 (3.62") 60.00 (2.36") 50.80 (2.00")
1/2" N.B. 300 LB 95.25 (3.75") 39.69 (1.56") 4 15.75 (0.62") 66.55 (2.62") 1.59 (0.06") 35.05 (1.38") 60.00 (2.36") 31.75 (1.25")
3/4" N.B. 300 LB 117.35 (4.62") 39.69 (1.56") 4 19.05 (0.75") 82.55 (3.25") 1.59 (0.06") 42.93 (1.69") 60.00 (2.36") 38.10 (1.50")
1" N.B. 300 LB 123.95 (4.88") 39.69 (1.56") 4 19.05 (0.75") 88.90 (3.50") 1.59 (0.06") 50.80 (2.00") 60.00 (2.36") 38.10 (1.50")
1 1/2" N.B. 300 LB 155.45 (6.12") 39.69 (1.56") 4 22.35 (0.88") 114.30 (4.50") 1.59 (0.06") 73.15 (2.88") 67.00 (2.64") 50.80 (2.00")
2" N.B. 300 LB 165.10 (6.50") 39.69 (1.56") 8 19.05 (0.75") 127.00 (5.00") 1.59 (0.06") 91.95 (3.62") 60.00 (2.36") 50.80 (2.00")
1/2" N.B. 600 LB 95.25 (3.75") 44.45 (1.75") 4 15.75 (0.62") 66.55 (2.62") 6.35 (0.25") 35.05 (1.38") 60.00 (2.36") 31.75 (1.25")
3/4" N.B. 600 LB 117.35 (4.62") 44.45 (1.75") 4 19.05 (0.75") 82.55 (3.25") 6.35 (0.25") 42.93 (1.69") 60.00 (2.36") 38.10 (1.50")
1" N.B. 600 LB 123.95 (4.88") 44.45 (1.75") 4 19.05 (0.75") 88.90 (3.50") 6.35 (0.25") 50.80 (2.00") 60.00 (2.36") 38.10 (1.50")
1 1/2" N.B. 600 LB 155.45 (6.12") 44.45 (1.75") 4 22.35 (0.88") 114.30 (4.50") 6.35 (0.25") 73.15 (2.88") 67.00 (2.64") 50.80 (2.00")
2" N.B. 600 LB 165.10 (6.50") 47.63 (1.88") 8 19.05 (0.75") 127.00 (5.00") 6.35 (0.25") 91.95 (3.62") 60.00 (2.36") 50.80 (2.00")
1/2" N.B. 900/1500 LB 120.65 (4.75") 44.45 (1.75") 4 22.35 (0.88") 82.55 (3.25") 6.35 (0.25") 35.05 (1.38") 60.00 (2.36") 31.75 (1.25")
3/4" N.B. 900/1500 LB 130.05 (5.12") 47.63 (1.88") 4 22.35 (0.88") 88.90 (3.50") 6.35 (0.25") 42.93 (1.69") 60.00 (2.36") 38.10 (1.50")
1" N.B. 900/1500 LB 149.35 (5.88") 50.80 (2.00") 4 25.40 (1.00") 101.60 (4.00") 6.35 (0.25") 50.80 (2.00") 67.00 (2.64") 38.10 (1.50")
1 1/2" N.B. 900/1500 LB 177.80 (7.00") 53.98 (2.13") 4 28.45 (1.12") 123.95 (4.88") 6.35 (0.25") 73.15 (2.88") 74.00 (2.91") 38.10 (1.50")
2" N.B. 900/1500 LB 215.90 (8.50") 60.33 (2.38") 8 25.40 (1.00") 165.10 (6.50") 6.35 (0.25") 91.95 (3.62") 67.00 (2.64") 50.80 (2.00")
1/2" N.B. 2500 LB 133.35 (5.25") 53.98 (2.13") 4 22.35 (0.88") 88.90 (3.50") 6.35 (0.25") 35.05 (1.38") 60.00 (2.36") 31.75 (1.25")
3/4" N.B. 2500 LB 139.70 (5.50") 53.98 (2.13") 4 22.35 (0.88") 95.25 (3.75") 6.35 (0.25") 42.93 (1.69") 60.00 (2.36") 38.10 (1.50")
1" N.B. 2500 LB 158.75 (6.25") 57.15 (2.25") 4 25.40 (1.00") 107.95 (4.25") 6.35 (0.25") 50.80 (2.00") 67.00 (2.64") 38.10 (1.50")
1 1/2" N.B. 2500 LB 203.20 (8.00") 66.68 (2.63") 4 31.75 (1.25") 146.05 (5.75") 6.35 (0.25") 73.15 (2.88") 80.00 (3.15") 50.80 (2.00")
2" N.B. 2500 LB 234.95 (9.25") 73.03 (2.88") 8 28.45 (1.12") 171.45 (6.75") 6.35 (0.25") 91.95 (3.62") 80.00 (3.15") 50.80 (2.00")
L
T
O.D
tt
Height of installed O.S. & Y: 96.2mm (3.79")
Height of 'H' Series installed Needle Valve: 50.3mm (2.00")
Height of 'H' Series Anti Tamper Valve: 48.8mm (1.92")
All the above in fully open position
ØR ØB
Note: t dimension is for raised face joint seal only.
FLANGE HOLES Visit us on the web at www.parker.com/ipd

Printed in England by Toptown Printers Ltd Barnstaple Devon 112© Nov 2002 Parker Hannifin Issue 1.
?dijhkc[djWj_ed
dijhkc[djWj_ed
?dijhkc[djWj_ed
?dijhkc[djWj_ed
FheY[ii9edjheb
FheY[ii9edjheb
FheY[ii9edjheb
FheY[ii9edjheb
Product Selection Guide
Product Selection
Product
Product
Product Guide
Selection
Selection
Selection
GuideGuide
Guide
Instrumentation
Directory
Table of Contents
Introduction.......................................168
Introduction . . . . . . . . . . . . . . . . . . . . . . 2
Valves
Valves
Needle
N eedle Valves
Valves................................170
................. 4
Manifold Valves..............................172
Manifold Valves . . . . . . . . . . . . . . . . . 6
Ball/Plug
B all/Plug Valves
Valves..............................174
................ 8
Check
C he c k VValves
alves.................................176
. . . . . . . . . . . . . . . . . .10
Filters.............................................178
F ilters . . . . . . . . . . . . . . . . . . . . . . . . .12
Relief
R elief Valves...................................179
Valves . . . . . . . . . . . . . . . . . . .13
Bleed
B leed and
an d P Purge
urge V Valves
alves.................180
. . . . . . . . . . 14
Metering
M etering V Valves
alves ..............................181
. . . . . . . . . . . . . . . .15
Diaphragm
D iaphragm V Valves
alves..........................182
. . . . . . . . . . . . . . .16
Instrumentation Group of Parker Hannifin
Analytical Systems
Analytical Systems............................184
. . . . . . . . . . . . . . . .18
7KH,QVWUXPHQWDWLRQ*URXSRI3DUNHU+DQQLÀQLV
Regulators
Regulators dedicated to being the global leader in the design,
P ressure Regulators
Pressure Regulators ......................186
. . . . . . . . . . . . 20 manufacture and distribution of high quality, critical
B ack P
Back ressure Regulators..............188
Pressure Regulators. s . . . . . . . 22 Á R Z D Q G X O W U D K L J K S X U L W \ F R P S R Q H Q W V I R U W K H
V aporizing Regulators
Vaporizing Regulators ....................189
. . . . . . . . . . . 23 Petrochemical, Chemical Processing, Oil and Gas,
Fittings..............................................190
Fittings . . . . . . . . . . . . . . . . . . . . . . . . .24 Power Generation, Water Analysis, Biopharmaceuti-
cal, Semiconductor Manufacturing and Analy tical
Hose/ Tubing/Quick Couplings...........192
Hose/Tubing/Quick Couplings . . . . . . 26
Equipment industries.
Flow
Flow Controllers
Controllers ................................193
. . . . . . . . . . . . . . . . . 27
With 11 manufacturing plants and over 300 autho-
PFA/PTFE
PFA /PTFE Products
Products..........................194
. . . . . . . . . . . . . . 28
rized distributors worldwide we can provide local
Sanitary
Sanitar y and
and Bio
BioPPharmaceutical.......195
harmaceutical . . . . 29 inventory and technical support to our customers
Tools
Tools and
and Accessories
Accessories ......................196
. . . . . . . . . . . . 30 any where in the world.
3DUNHU+DQQLÀQ&RUS
3DUNHU+DQQLÀQLVWKHZRUOGҋVOHDGLQJGLYHUVLÀHG
manufacturer of motion and control technologies
and systems, providing precision-engineered
solutions for a wide variety of commercial, mobile,
industrial and aerospace markets.
263 manufacturing sites around the world
8,200 distributors
400,000 customers
3,200 product lines
Listed as PH on the NYSE
Instrumentation
2
Directory

Premier Customer Service Heat Code Traceability
The Instrumentation Group is driven to provide our 3DUNHU+DQQLÀQҋV,QVWUXPHQWDWLRQ*URXSRIIHUV
customers with premier customer ser vice through +HDW&RGH7UDFHDELOLW\+&7WRPHHWRUH[FHHGDOO
o n t i m e d e l i v e r y o f q u a l i t y p r o d u c t s a n d va l u e DSSOLFDEOHVSHFLÀFDWLRQVWRDVVXUHRXUFXVWRPHUV
DGGHGVHU YLFHVVXFKDVWKH9HULÁR'LYLVLRQ([SUHVV that they are working with a high quality product. It
Ser vice Program, custom assemblies and selection acts as an assurance for today and for tomorrow.
safety and installation training.
7KHVHVSHFLÀFDWLRQVHQVXUHKLJKTXDOLW\LQVWUXPHQ-
Engineering Excellence tation components for use in fossil fuel power plants,
By remaining focused on our customers we have FKHPLFDOUHÀQHULHVJHQHUDOLQVWUXPHQWDWLRQDQG
been able to introduce products that not only solve processing plants. Requirements are now emerging
RXUFXVWRPHUҋVEXVLQHVVFKDOOHQJHVEXWDGGUHVV in the semiconductor and pharmaceutical industries.
VSHFLÀFLQGXVWU\QHHGVDQGLVVXHV
Not only are the materials continuously monitored,
Using the latest in virtual engineering tools, Parker but Parker adheres to a formal, documented Quality
Instrumentation engineers have reduced the time Assurance Program that controls manufacturing,
to develop, test and manufacture our latest product PDUNLQJWHVWLQJDQGH[DPLQDWLRQSURFHGXUHV
innovations. cleaning and packaging.
To assist our customers with their designs, our 2D HCT is offered on the following quality stainless
and 3D CAD drawings are available online. steel components:
CPI™ and A-LOK® Tube Fittings
New Innovations
UltraSeal™ and VacuSeal™ Fittings
The result of innovative processes and techniques
Ball, Needle and Check Valves
that run throughout the Instrumentation Group has
been the manufacture of truly innovative product Instrumentation Pipe Fittings
solutions. Recently, we have launched a series of Orbital Tube Weld Fittings
breakthrough products that deliver a huge increase MiniButtweld™ Fittings
in safety, whilst also dramatically reducing installa- Filters
tion and maintenance time. Other developments
have included the production of a wide range of Together, We Are Innovators
products aimed at eliminating fugitive emissions into With such a strong global team, including a diverse
the environment. customer base, we are proud to nurture an innova-
Some recent innovations include: tive environment. Together, we are producing
solutions that make us Faster, Smarter, Safer and
CCIMS &OHDQHU,I\RXZRXOGOLNHWRÀQGRXWPRUHDERXW
PHASTITE how we can work together to this end, please
contact us today.
Pro-Bloc® (Fe)
0RQRÁDQJH)H
Instrumentation
3
Directory

Valves
Needle Valves
V Series (Catalog 4110- V)

s &ORPOSITIVELEAKTIGHTSHUT OF FAND s 7IDEVARIET YOFSIZEANDEND
REGULATIONOFmUIDS C ONN E C T I ON S
s #HOICEOFTHREESTEMT YPES
SN6 Series (Catalog 4110-SN)

s 0ROVIDESSHUT OF FANDCOAR SE s )N LINEANDANGLEPAT TERNS
REGULATIONOFLIQUIDSANDGASES s )DEALCYLINDERVALVE
s #HOICEOFT WOSTEMT YPES
VQ Series (Catalog 4110-VQ)

s )N LINEANDANGLEPAT TERNS s #OLOR CODEDHANDLES
s 0ANELMOUNT ABLE s 1UICKACTUATIONFORLOWPRESSURE
A PPLI C A T I ON S
NP6 Series (Catalog 4110-NP)

s #HOICEOFT WONON ROT ATING s 0ANELMOUNT ABLE
STEMT YPES s &RACTURERESIST ANTNYLONHANDLE
s 0ACKINGBELOWPOWERTHREADS
PV Series (Catalog 4110-PV)

s 2ODDABLESTRAIGHTTHROUGHmOWPATH s "ONNETLOCKPLATERESISTSACCIDENT AL
s 'AUGEPOR TOPTION BONNETDISENGAGEMENT
s 0%%+ ™!CET AL0&!SEATMATERIALS
AV A IL A B L E
U Series (Catalog 4110-U)

s 3TEMPACKINGBELOWTHETHREADS s 0ANELMOUNT ABLE
ISOLATESTHETHREADLUBRICANTFROM s )DEALFORSTEAMBLOWDOWN
THEmOW
s 3EVERESER VICEAPPLICATIONS
Instrumentation
Directory
4 170 Parker Hannifin Corporation

HNV Series (Catalog 4190-HV)
s #OMPACTNEEDLEVALVES s !VAILABLEWITHINTEGRAL! ,/+®OR
s &ORAPPLICATIONSUPTOPSI #0)™CONNECTIONSREDUCINGLEAK
BAR PATHSANDREDUCINGINST ALLATIONCOSTS
s 3OF TTIPPEDOPTIONALSEATINGAVAILABLE
FORGASEOUSAPPLICATIONS
RPV Series (Catalog 4190-HV)

s &ORmUIDSCONT AININGHIGHLEVELSOF s REPEAT ABLEBUBBLETIGHT
CONT AMINATIONFREQUENTLYFOUNDIN SHUTOF F
OILANDGASPROCESSINGFACILITIES
s 3TRAIGHTTHROUGHmOWPAT TERN
RODDABLEDESIGN
HGV Series (Catalog 4190-HV)

s 5PTOPSIG BARG s 3OF TTIPPEDOPTIONALSEATINGAVAILABLE
s #OMPACTSINGLEANDMULTIPOR T FORGASEOUSAPPLICATIONS
GAUGEVALVES
Bod y
Temper atur e Cv Material A c tuation Seat / Seal Material End Connec tions
E t h y len e P r o p y len e
Highly Fluorinated
S tainles s S teel
Buna-N Rubber
S ili c o n R u b b e r
Fluor ocarbon
Fluor ocarbon
Pneumatic
GR A FOIL®
Ma ximum
Manual
Rubber
Rubber
P T FE
A ll o y
M o d el O per a t in g
Val v e G r o u p s Series P res sure Min Ma x Ma x Min Ma x Cat alog
6 0 0 0 p si -65 F 450 F 1/ 8 in 3 / 4 in
V 1.3 0 x x x x x x x 4110 -V
414 bar -54 C 232 C 3mm 12
6 0 0 0 p si -65 F 450 F 1/ 4 in 1/ 4 in
SN6 0.3 0 x x x x 4110 -SN
414 bar -54 C 232 C
3 0 0 p si -2 0 F 200 F 1/ 8 in 1/ 2 in
VQ 0.8 0 x x x x x x x x 4110 -VQ
21 bar -2 9 C 93 C 3mm 10mm
6 0 0 0 p si -70 F 70 0 F 1/ 4 in 3 / 8 in
NP 6 0.6 0 x x x x x x x x 4110 -NP
414 bar - 57 C 37 1 C 6mm 8mm
6 0 0 0 p si -2 0 F 400 F 1/ 4 in 3 / 4 in
PV 2.0 0 x x x x x x x 4110 -P V
414 bar -2 9 C 20 4 C
6 0 0 0 p si -65 F 120 0 F 1/ 8 in 1 in
U 2.70 x x x x 4110 -U
414 bar -54 C 6 49 C 6mm 25mm
N e e dle 20000 psi -65 F 800 F 1/ 4 in 1 in
MP N x x x x x 423 4
Valves 1379 bar -54 C 4 27 C
3 0000 psi -10 F 400 F 9 / 16 in 9 / 16 in
MP GV x x x x x x 423 4
2 0 6 8 bar -23C 20 4 C
10000 psi -65 F 10 0 0 F 1/ 4 in 1/ 2 in
HN V 0.3 5 x x x x x 419 0 -H V
69 0 bar -54 C 538 C 6mm 12mm
10000 psi -65 F 10 0 0 F 1/ 4 in 1/ 2 in
HRP V 1.8 0 x x x x x 419 0 -H V
69 0 bar -54 C 538 C 6mm 12mm
10000 psi -65 F 10 0 0 F 1/ 4 in 1/ 2 in
HGV 0.3 5 x x x x x 419 0 -H V
69 0 bar -54 C 538 C 6mm 12mm
6 0 0 0 p si -65 F 10 0 0 F 1/ 4 in 1/ 2 in
H VG 0.3 5 x x x x x 419 0 -H V
414 bar -54 C 538 C 6mm 12mm
10000 psi -65 F 10 0 0 F 1/ 4 in 1/ 2 in
HY N V 0.3 5 x x x 419 0 -H V
69 0 bar -54 C 538 C 6mm 12mm
Instrumentation
Directory

Valves
Manifold Valves
CCIMS® (Catalog 4190-CCIMS)

s #LOSECOUPLEDSOLUTIONFORmOW s 2EDUCTIONSINCONNECTIONSANDLEAK
MEASUREMENTAPPLICATIONS PATHSOFUPTO
s 2EDUCTIONSININST ALLATIONTIMEOF s &EATURESPHAST lT ®FORRAPID
UPTO TRANSMIT TERREMOVALANDCONNECTION
0RQRÁDQJH(Catalog 4190-FP)
s #OMPACTDOUBLEBLOCKANDBLEED s #ONlGURABLEOPTIONSINCLUDESINGLE
VALVESFEATURINGNEEDLEVALVES BLOCKDOUBLEBLOCKANDDOUBLEBLOCK
s 2EDUCINGINST ALLATIONSCOSTWHILE ANDBLEED
IMPROVINGSAFET YTHROUGHAREDUCTION s !VAILABLEINARANGEOFMATERIALS
INLEAKPATHS INCLUDINGCARBONSTEELST AINLESS
STEELDUPLEXALLOY
Pro -Bloc® (Catalog 4190-FP)

s #OMPACTDOUBLEBLOCKANDBLEED s !VAILABLEINARANGEOFMATERIALS
VALVESFEATURINGNEEDLEORBALL INCLUDINGCARBONSTEELST AINLESS
VALVEOPTIONS STEELDUPLEXALLOY
s 2EDUCINGINST ALLATIONSCOSTWHILE s -ANUFACTUREDFROMFORGINGSTOGIVE
IMPROVINGSAFET YTHROUGHAREDUCTION HIGHTENSILESTRENGTHTHROUGH
INLEAKPATHS IMPROVEDGRAINSTRUCTURE
s #ONlGURABLEOPTIONSINCLUDESINGLE
BLOCKDOUBLEBLOCKANDDOUBLEBLOCK
ANDBLEED
0RQRÁDQJH(Fe) & Pro -Bloc®(Fe) (Catalog 4190-FP)

s )3/ APPROVED
s (IGHESTPOSSIBLEg!gCLASSLEAK AGE
RATESACHIEVED
s !LLTHREADSSEALEDFROMTHEMEDIA
s !LLBALLVALVESAREBI DIRECTIONAL
s &IRESAFEDESIGNAVAILABLE
Instrumentation
Directory

H-Series (Catalog 4190-PM/4190-FM)
s !COMPREHENSIVERANGEOFAND s !VAILABLEINST AINLESSSTEELANDMANY
VALVEMANIFOLDSFORmOWAPPLICATIONS EXOTICALLOYSINCLUDING(AST ALLOY
s !VAILABLEWITHINTEGRAL0 4&REE ® -O-/.%,®ANDALLOY
CONNECTIONSREDUCINGLEAKPATHSAND
INST ALLATIONCOST
Hi-Pro Series (Catalog 4190-HBM)

s !COMPLETERANGEOFBALLVALVES s 7ORKINGPRESSURESUPTOPSI
MMBALLANDNEEDLEVALVE BAR
M A NI FO L D S s !VAILABLEWITHINTEGRAL! ,/+®OR
s )NCLUDINGBLOCKANDBLEEDAND #0)™CONNECTIONSREDUCINGLEAK
DOUBLEBLOCKANDBLEEDMANIFOLD PATHSANDINST ALLATIONCOSTS
OP T IONS
Temper atur e Bod y Material P ack ing Seat / Tip E n d C o n ne c t ion Si z e R an ge

S tainles s S teel
C ar b o n S t e el
GR A FOIL®
M a x im um
P EEK ™
P C T FE
316 S S
P T FE
P T FE
A ll o y
Val v e M o d el P r oduc t O per a t in g

Gr oups Series Description P res sure Min Ma x Cv Min Ma x Cat alog
d o u b l e b lo c k A NSI 2 5 0 0 -65 F 10 0 0 F 1/ 4 in 1 / 2 in
MF x x x x x x x x 419 0 -FP
a n d ble e d A PI 10,0 0 0 -54 C 538 C 6mm 12mm
d o u b l e b lo c k A NSI 2 5 0 0 -65 F 450 F 1/ 4 in 1 in
PB x x x x x x x 419 0 -FP
a n d ble e d A PI 10,0 0 0 -5 4 C 232 C 6mm 25mm
2 v a l v e m a ni f o l d s 10,0 0 0 psi -65 F 10 0 0 F 1/ 4 in 1/ 2 in
H2 0.3 5 x x x x x x x 419 0 -PM
- n e e dl e s t y l e 6 8 9 bar -54 C 538 C 6mm 12mm
Manifolds 3 v a l v e m a ni f o l d s 10,0 0 0 psi -65 F 10 0 0 F 1/ 4 in 1/ 2 in
H3 1.8 0 x x x x x x x 419 0 -FM
- n e e dl e s t y l e 6 8 9 bar -54 C 538 C 6mm 12mm
5 v a l v e m a ni f o l d s 10,0 0 0 psi -65 F 10 0 0 F 1/ 4 in 1/ 2 in
H5 0.3 5 x x x x x x x 419 0 -FM
- n e e dl e s t y l e 6 8 9 bar -5 4 C 538 C 6mm 12mm
2 & 3 v alve
6 0 0 0 p si -65 F 450 F 1/ 4 in 1/ 2 in
HBM m a n i f o l d s b a ll x x x x x x 419 0 -HBM
414 bar -5 4 C 232 C 6mm 12mm
s t yle
Instrumentation
Directory

7
Valves Valves
Ball/Plug VBall/Plug
alves Valves
3DUNHUEDOODQGSO3
XD JUYNDHOUYEHDVOOZ
DQLWKGHS[OXFJHOYOHDQOYWHWH
VP
ZSLHWKUDHWX
[FUHHODOHQQGWWHPSHUDWXUHDQG
pressure characteprriesstiscu
s,rearceha wreacll teesrtisatbiclis,
shaerdefworeplloewse tar,bplisrohceedsfsor power, proce
and instrumentatiaondain ppsltircuam tioennstaatisonona/popffl/idciavteiorn
tesr aors soenlecfftoriver ter or selector
valves. Options invcalu
lvdees.loOcpktoiount sdeinvcicluedsealnodckroutnde , vsitcaeinl
s easnsdsrtoeuenl d, stainless s
or T-bar handles. or
Cle T-abnainr ghaonpdl tioenss. C inlcelaundine gOo2,phtiiognhspin ucriltuydaenO d 2, high purity and
grade A. Availablegrwad itheC A.PA I™v,aA- ilaLbO leKw ®
h aClePIa™n, dA-fem
,itm LOK al®e, m NP alTe, and female NPT,
UltraSeal™ and VaUclu trSaSeaelal™™
enadndconn VaceucSte al™.end connections.
ions
MB Series (CatM
aloBg 4
S1e21r-iM
eBs) (Catalog 4121-MB)
s /NEPIECECOMPACTBsA R/SNTOECPKIEDCEESICGONMPACTsB0ARASTETONCTEKDDSEESAIGTNDESIGNs 0ATENTEDSEATDESIGN
s #ENTEROF FPOSITIONFOsR#E WNTAEYROF FPOSITIONsFO3RTA NWDAYRDDROP INREPsLA3CTEAM NDENARTDDROP INREPLACEMENT
s WAYINLINEANGLE s W AWYAY IW
NLAINYE ANGLE WAY WAY
AND WAY AND WAY
B Series (CataloBg 4S1e21r-iBe)s (Catalog 4121-B)

s WAY WAYDIVER TIsNGO W
RASYPRIN GW AYDIVERsTIN7GIODRESSTPVRIANRGIE T YOFSEAsTS7 SIDEEASLSTVAANRDIET YOFSEATSSEALSAND
LOADED WAYSELECTORLDOEASDIEGDNS WAYSELECTOPRODRETSCIOGNNSECTIONS POR TCONNECTIONS
s 7IDETEMPERATUREAPsP L7 ICIADTEIOTNEM
RAPNEGREATUREAsP#POLICNANTEIOCTNIORNASNGINEC LUDEs# #0O)™NNECTIONSINCLUDE#0)™
ª&ª# TO ª& ª&ª# ª# TO !ª &,/+ªM ®
# ALEANDFEM! AL E,/.0 +®4MALEANDFEMALE.0 4
5 L T R A 3 E
s 2ATEDFORUPTOsP2SIATEDFORBUAPR TOPSIBAR A L ™
A N D 6 A C U 3 E5AL T
™
R A 3 EAL ™AND6ACU3EAL ™
SWB Series (CSatW

aloBg 4
S1e25r-iSeW
s B(C
) atalog 4125 -SWB)
s :EROCLEARANCEBODYsA L:LOEW
ROSCRLEEPAARAIRNSCEBODsY )A3LL/O WT YSPREEPAACITRUSATORMsOU)N3T/IN GT YDPESAIGCNTUATORMOUNTINGDESIG
INlELD INlELD s !VAILABLEUPTOFULLsm!OVWAIDLAEBSLIEGNUPTOFULLmOWDESIGN
s 3PRINGLOADEDSEATSsAN3DPSRITNEGMLOSAEDALESDSEATSANDSTEMSEALS
s &ULLYENCLOSEDBODYsBO&LUTSLLYENCLOSEDBODYBOLTS
HB Series (CatH
aloBg 4
S1e21r-iHeBs) (Catalog 4121-HB)
s #OMPACT&.0 4VER SIsON#FOOM RPTIAGCHTT&.0 4VERsSIO0N%%FO+RTTRIUGNHNTIONBEARINsG0S%P%R+OVTIRDUENNIONBEARINGSPROVIDE
WORKAREAS WORKAREAS HIGHCYCLELIFE HIGHCYCLELIFE
s &ULLOPERATINGPRESSUsRE&UINLLOPERATINGPRESsSUREINPSI BAR sRATINGW IPTHSI BAR RATINGWITH
ANYPOR T ANYPOR T 0%%+ ™SEATS 0%%+ ™SEATS
s % XCELLENTFOR#.' s % XCELLENTFOR#.'
Instrumentation
Directory
8 8 174 Parker Hannifin Corporation

MPB Series Ball Valve (Catalog 4234)
s WAYAND WAYBALLVALVEFOR s $ESIGNEDFORAND TURNMEDIA
SEVERESER VICEAPPLICATIONS SHUTOF FORSWITCHINGAPPLICATIONS
PR Series (Catalog 4126-PR)

s ,OWOPERATINGTORQUE s 4YPICALLYUSEDINLABORATORIES
s /PTIONALLOCKINGDEVICEDOWNSTREAM s -OSTCOMPACTªACTUATEDVALVE
VENTANDMET ALTEEHANDLES
Pneumatic/Electric Actuators (Catalog 4123)

s 3ERIESPNEUMATICACTUATOR S s AND3ERIESELECTRICACTUATOR S
PROVIDEªANDªROT ATIONIN PROVIDEªANDªACTUATIONFOR
BOTHDOUBLEACTINGANDSPRINGRETURN OUR"-"("37"SERIESBALL
MO D E L S V A L VE S
HBV Series (Catalog 4190-HV)

s 3UIT ABLEFORTHEMOSTDEMANDING s 4RUET WOPIECEDESIGNREDUCESBODY
APPLICATIONSINTHEOILGASAND LEAK AGEPATHS
PROCESSCONTROLINDUSTRIES s #OMPLIESWITH!.3) !3-%"
s )NTEGRALCOMPRESSIONENDSAVAILABLE REQUIREMENTSWHEREAPPLICABLE
ELIMINATINGT APERTHREADSANDTHREAD
SE AL AN T S
End Connection
Temper atur e Cv Bod y Material A c tuation Seat / Seal Material Si z e R an ge
Highly Fluorinated
P r o p y le n e R u b b e r
S tainles s S teel
Buna-N Rubber
Fluor ocarbon
Fluorocarbon
Pneumatic
GR A FOIL®
Ethylene
M a x im um
Elec tric
Manual
Rubber
P C T FE
Br as s
P EEK
Val v e M o d el P r oduc t O per a t in g

P T FE
A ll o y
PFA
Gr oups Series Description P res sure Min Ma x Ma x Min Ma x Cat alog

Mini B a r s t o c k 3 0 0 0 p si -65 F 300 F 1/ 16 in 3 / 4 in
MB 11.0 0 x x x x x x 4121-MB
B a ll V a l v e 2 07 b a r -54 C 149 C 3mm 12mm
6 0 0 0 p si -65 F 400 F 1/ 16 in 3 / 4 in
B B a ll V a l v e 6.4 0 x x x x x x x x x x x x x 4121- B
414 b ar -54 C 20 4 C 3mm 12mm
S w i n g O u t B a ll 2 5 0 0 p si -65 F 600 F 1/ 4 in 1 in
SW B 3 5.0 0 x x x x x x x x x x 412 5 -SW B
Valve 172 b ar -54 C 316 C n / a mm n / a mm
B a ll / P l u g 10000 psi -65 F 400 F 1/ 4 in 1/ 2 in
HB B a ll V a l v e 1.0 0 x x x x x x x x x 4121- HB
Valves 69 0 bar -54 C 20 4 C 6mm 12mm
M e d. P r e s sur e 2 0000 psi -10 F 400 F 1/ 8 in 1 in
MPB 8.8 0 x x x x x x x x x 42 3 4
B a ll V a l v e 1379 b ar -2 3C 20 4 C n / a mm n / a mm
3 0 0 0 p si -10 F 400 F 1/ 8 in 1/ 2 in
PR P lu g Va l v e 3.20 x x x x x x 412 6 -PR
2 07 b a r -2 3C 20 4 C 3mm 12mm
6 0 0 0 p si -65 F 450 F 1/ 8 in 1 in
HBV B a ll V a l v e x x x x x x 419 0 - HBV
Instrumentation
414 b ar -54 C 232 C 6mm 2 5mm

Directory

9
Valves
Check Valves
3DUNHUFKHFNYDOYHVDUHGHVLJQHGIRUXQLGLUHFWLRQDOÁRZFRQWURORIÁXLGVDQGJDVHVLQLQGXVWULHVVXFKDV
chemical processing, oil and gas production and transmission, pharmaceutical, pulp and paper, power
and utilities.
C Series (Catalog 4130-C)

s 2ESILIENTCUSTOMMOLDED s #RACKING0RESSURES ⁄
SEATDESIGN ANDPSI
s "ACKSTOPPEDPOPPETTOMINIMIZE BAR
SPRINGSTRESS s 0OR TCONNECTIONSINCLUDEMALE
ANDFEMALE.0 4#0)™! ,/+®
5LTRA3EAL ™6ACU3EAL ™"30
3!%AND3EAL ,OK ®
CO Series (Catalog 4130-CO)

s 3UIT ABLEFORAPPLICATIONSREQUIRING s #RACKING0RESSURES ⁄
HIGHINTEGRIT YLEAKRATESAND ANDPSI
RE SEALINGCAPABILITIES BAR
s 3EALINTEGRIT YTOX STD s !VAILABLEWITHHIGHLYmUORINATED
A TM C C S E C mUOROCARBONRUBBER
s "ACKSTOPPEDPOPPETTOMINIMIZE s /NLYCHECKVALVEWITHPUBLISHED
SPRINGSTRESS HELIUMLEAKRATE
CB Series (Catalog 4130-CB)

s 2EDUCESMAINTENANCEWHILE s 2UGGEDBALLDESIGNFORDEMANDING
IMPROVINGPER FORMANCEREQUIRE A PPLI C A T I ON S
MENTSONDUALFUELTURBINES s &ORHIGHTEMPERATURESWITHHIGHLY
s #RACKING0RESSURES VISCOUSMEDIA
ANDPSI

BAR
MPC Series (Catalog 4234)

s 6ARIET YOFELASTOMERICPOPPETSEALS s -0)™CONETHREADANDFEMALE.0 4
s PSI BAR CRACKINGPRESSURE CONNECTIONSAVAILABLE
s &ORPRESSURESUPTOPSI
BAR

Instrumentation
Directory

MPCB Series (Catalog 4234)
s -ET ALTOMET ALSEATFORUSEIN s -0)™CONETHREADANDFEMALE
APPLICATIONSTHATCANNOTACCEPT .0 4CONNECTIONSAVAILABLE
mUOROCARBONRUBBER s &ORPRESSURESUPTOPSI
s PSI BAR CRACKINGPRESSURE BAR
LC Series (Bulletin 4130-LC)

s &OREX TREMETEMPERATURE s 4HEGRAVIT YASSISTEDPOPPETUSES
A P P L I C A T I O N S REVER SEmOWTOACHIEVEASEALTO
WITHIN OFFOR WARDmOW
Cr ack ing Bod y

Temper atur e Cv P res sure Material Seal Material End Connec tions
Fluor ocarbon Rubber
Highly Fluorinated
Neopr ene Rubber

S tainles s S teel
Buna-N Rubber
P ar ker carbon
Fluor ocarbon
P ar ker fill /
M a x im um
Rubber
Met al
Br as s
P T FE
Val v e M o d el O per a t in g
Gr oups Series P res sure Min Ma x Ma x Ma x Min Ma x Cat alog
6 0 0 0 p si -65 F 400 F 10 0 psi 1/ 8 in 1 in
C 6.70 x x x x x x x x 413 0 -C
414 bar -54 C 20 4 C 6.9 b a r 3 mm 25 mm
6 0 0 0 p si -15 F 400 F 10 0 psi 1/ 4 in 1/ 2 in
CO 2.70 x x x x x 413 0 -CO
414 bar -2 6 C 20 4 C 6.9 b a r 6mm 12mm
Chec k 3 0 0 0 p si -65 F 450 F 120 psi 3 / 8 in 3 / 4 in
CB 6.0 0 x x 413 0 -CB
Valves 2 07 b a r -54 C 232 C 8. 27 b a r
20000 psi -10 F 400 F 5 p si 1/ 4 in 1 in
MP C x x x x x 423 4
1379 bar -23C 20 4 C .3 4 5 bar
20000 psi -10 0 F 600 F 5 p si 1/ 4 in 1 in
MPCB x x 423 4
1379 bar -73 C 316 C .3 4 5 bar
6 0 0 0 p si -10 0 F 900 F 1/ 8 in 1/ 2 in
LC 2.3 0 x x 413 0 -LC
414 bar -73 C 482 C
Instrumentation
Directory
177 Parker Hannifin Corporation 11

Valves
Filters
For protection of instrumentation systems from undesirable materials such as dir t, chips, scale and
RWKHUIRUHLJQSDU WLFOHV2SWLRQVLQFOXGH2[\JHQDQGVSHFLDOFOHDQLQJE\SDVVDQGLQWHJUDOFRPSUHVVLRQ
por ted bypass.
F Series (Catalog 4130-F)

s 2EPLACEABLESINTEREDST AINLESS s /PTIONALANDMICRONWIRE
STEELlLTERELEMENT CLOTHlLTERELEMENTS
FT Series (Catalog 4130-FT)

s &ILTERELEMENTSAREEASILYREPLACED s 2EPLACEABLESINTEREDST AINLESS
WITHOUTDISCONNECTINGTHETUBELINES STEELlLTERELEMENT
s &AST,OOPBYPASSOPTIONENABLESA s /PTIONALANDMICRONWIRE
CONTINUOUSSELFCLEANINGmOW CLOTHlLTERELEMENTS
MPF Series (Catalog 4234)

s (IGHPRESSUREAPPLICATIONSUPTO s )NLINElLTER SHELPPROTECTVALUABLE
PSIBAR EQUIPMENTINTHEPROCESSSYSTEM
s 3INTEREDST AINLESSSTEELlLTERDISC s -0)™CONETHREADANDFEMALE.0 4
CONNECTIONSAVAILABLE
End
Temper atur e Cv Bod y Material Seal Material Connec tions
Highly Fluorinated
P r opylene Rubber
Neopr ene Rubber

S tainles s S teel
Buna-N Rubber
Fluor ocarbon
Fluor ocarbon
S il v e r P l a t e d
N i c k e l A ll o y
E t h y len e
M a x im um
Rubber
Br as s
P T FE
Val v e M o d el P r oduc t O per a t in g Micr on

Gr oups Series Description P res sure Min Ma x Ma x Range Min Ma x Cat alog
6 0 0 0 p si -65 F 400 F 1/ 8 in 1 in
F I n li n e F il t e r 3.4 0 . 5 to 5 0 0 x x x x x x x 413 0 -F
414 bar -54 C 20 4 C 3mm 25mm
6 0 0 0 p si -10 0 F 900 F 1/ 8 in 1/ 2 in
Filter s FT Tee Filter 2.5 0 . 5 to 5 0 0 x x x x x x x x x 413 0 -F T
414 bar -73 C 482 C 6mm 12mm
M e diu m 20000 psi -10 F 400 F
MP F 0.59 .5 to 10 0 x x 1/ 4 in 9 / 16 in 423 4
Pressure Filter 1379 bar -23C 20 4 C
Instrumentation
Directory

Relief Valves
RL4 Series (Catalog 4131-RL)

s (ANDLEFORlELDMAINTENANCE s -ANUALOVERRIDEOPTIONWITHPOSITIVE
s % X TERNALLYADJUST ABLEPRESSURE STEMRETRACTIONISAVAILABLEFORTHE
SET TINGSWHILEVALVEISINOPERATION FULLWORKINGPRESSURERANGE
s 3EVENDIF FERENTSPRINGS s #OLORCODEDSPRINGSANDLABELS
INDICATESPRINGCRACKINGRANGE
RH4 Series (Catalog 4131-RH)

s %IGHTSPRINGS s 0RESETFROMFACTOR YANDCOMESWITH
s -ANUALOVERRIDEOPTIONWITHPOSITIVE ST ANDARDSPRINGS
STEMRETRACTIONISAVAILABLEFOR
PRESSURESUPTOPSIBAR
Bod y
Temper atur e Cv Material Seal Material End Connec tions
Highly Fluorinated
P r opylene Rubber
Neopr ene Rubber

S tainles s S teel
Buna-N Rubber
Fluor ocarbon
Fluor ocarbon
E t h y len e
M a x im um
Rubber
Val v e M o d el O per a t in g
Gr oups Series P res sure Min Ma x Ma x Min Ma x Cat alog
4 0 0 p si -70 F 400 F 1/ 4 in 1/ 4 in
RL 0.8 x x x x x x 4131- RL
28 bar -57C 20 4 C 6mm 8mm
R e li e f 6 0 0 0 p si -70 F 400 F 1/ 4 in 1/ 4 in
RH 0.4 x x x x x x 4131- RH
Valves 414 bar -57C 20 4 C 6mm 8mm
209 9 9 psi -10 F 400 F 1/ 2 in 9 / 16 in
MP R A 0.7 x x x x x 423 4
14 4 8 bar -23C 20 4 C n /a n /a
Instrumentation
Directory

13
Valves
Bleed and Purge Valves
BV Series (Catalog 4133-BP)

s 2ECOMMENDEDFORUSEINBLEEDING s -ULTI VALVEMANIFOLDSOR
HYDRAULICSYSTEMS GAUGE ROOTVALVES
s 6ALVEVENTSLINEPRESSURETO
ATMOSPHEREORTOCONT AINMENT
PG Series (Catalog 4133-BP)

s 6ENTHOLEINTHECAPBLEEDSDRAINS s #RIMPEDCAPENSURESSAFERELIEFOF
ORPURGESSYSTEMPRESSURE SYSTEMPRESSURES
s /PTIONAL0 4&%BALLREQUIRESONLY
lNGER TIGHTTORQUETOACHIEVEA
LEAK TIGHTSEAL
M a x im um Temper atur e Cv Bod y Material End Connec tions

M o d el O per a t in g S t ainles s
Val v e G r o u p s Series P res sure Min Ma x 0.1 Br as s S teel A ll o y Min Ma x Cat alog
10000 psi -65 F 850 F
BV x x x 1/4" 1/ 2" 4131- BP
69 0 bar -54 C 454 C
Blee d an d 4 0 0 0 p si -65 F 400 F
PG x x x 1/ 8" 1/ 2" 4131- BP
P u r g e Val v e s 276 b a r -54 C 20 4 C
3 0000 psi -10 F 400 F
MP BV x 9 / 16" 9 / 16" 423 4
2 0 6 8 bar -23C 20 4 C
Instrumentation
Directory

Metering Valves
N Series (Catalog 4170-N)

s 0ANELORIN LINEMOUNTING s 6ALVESTEMTHREADSNOTINCONT ACT
s !NGLEORIN LINEPAT TERNS WITHPROCESSmUID
HR Series (Catalog 4170-HR)

s "UBBLETIGHTSHUT OF FCAPABILIT Y s 3EVENOPTIONALVALVESTEMT APER S
s (IGHRESOLUTIONMETERINGVALVEWITH
LIMITEDHYSTERESIS
Temper atur e Cv Bod y Material Seat Material End Connec tions

Fluor ocarbon Rubber
Highly Fluorinated
Neopr ene Rubber

S tainles s S teel
Buna-N Rubber
Fluor ocarbon
Ma ximum
Rubber
Br as s
M o d el O per a t in g
Val v e G r o u p s Series P res sure Min Ma x Ma x Min Ma x Cat alog
2 0 0 0 p si -50 F 400 F 1/ 16 in 1/ 4 in
NS 0.0 4 0 x x x x x x x 4170 -N
13 8 bar -46 C 20 4 C 3mm 6mm
10 0 0 psi -50 F 400 F 1/ 8 in 1/ 4 in
NM 0.10 0 x x x x x x x 4170 -N
Metering 69 bar -46 C 20 4 C 3mm 6mm
Valves 10 0 0 psi -50 F 400 F 1/ 8 in 3 / 8 in
NL 0.20 0 x x x x x x x 4170 -N
69 bar -46 C 20 4 C 6mm
2 5 0 p si -50 F 400 F 1/ 16 in 1/ 4 in
HR 0.10 0 x x x x x x x 4170 -HR
17 bar -46 C 20 4 C 3mm 6mm
Instrumentation
Directory

15
Valves
Diaphragm Valves
Z
ZZZSDUNHUFRPYHULIOR
ZZSDUNHUFRPYHULIOR
NOVA Series (Catalog 4515)

s 'ENERALPURPOSEHIGHCYCLE s (ANDWHEELLEVERANDINDICATING
COMPACTVALVE HANDWHEELOPTIONS
s &ORREGULATOROUTLETVALVEGAS
CONTROLPANELSANDANALY ZERSAMPLING
SYSTEMAPPLICATIONS
NOVAAOP (Catalog 4515)

s 'ENERALPURPOSEHIGHCYCLE s .ORMALLYOPENANDNORMALLYCLOSED
COMPACTVALVE s 6ARIOUSACTUATIONPRESSURESAVAILABLE
s &ORGASCONTROLPANELSANDANALY ZER
SAMPLINGSYSTEMAPPLICATIONS
NV55 (Catalog 4515)

s 'ENERALPURPOSEHIGHmOW
COMPACTVALVE
s &ORmOWINGLARGEVOLUMESOF
CORROSIVEANDNON CORROSIVEmUIDS
Instrumentation
Directory

944AOPHPNCSP (Catalog 4515)
ss (IGHPRESSUREAIROPERATEDVALVE s /PENINGFUNCTIONINCORPORATES
s 2ELIABLEACCURATEPER FORMANCE H Y DR A U L I C S
16 Series (Catalog 4515)

s (IGHPRESSUREVALVEFORGAS s -ET AL TO MET ALDIAPHRAGMSEAL
MANIFOLD BOXSYSTEMS s 0ACKLESSVALVEDESIGN
s ,334MACHINEDBODYDESIGN
Temper atur e Cv Bod y Material A c tuation
Pneumatic
S t ainles s
M a x im um
Manual
Br as s
S teel
A ll o y
P r oduc t O per a t in g
Val v e G r o u p s M o d el S e r ie s Description P res sure Min Ma x 0.1 0.3 0.6 Cat alog
Di a p h r a g m 2 5 0 p si g -15 F 15 0 F
NOVA S eries x x x x x 4 515
Springle ss 17 barg -2 6 C 66 C
Di a p h r a g m 125 psig -15 F 15 0 F
NOVA AOP x x x x x 4 515
Springless 9 b arg -2 6 C 66 C
Diaphr agm Di a p h r a g m 2 5 0 p sig -15 F 15 0 F
N V5 5 x x x x 4 515
Valves Springless 17 barg -2 6 C 66 C
Di a p h r a g m 3 5 0 0 p sig -40 F 15 0 F
9 4 4AOPHPNCSP x x x 4 515
Springless 241 barg -40 C 66 C
3 0 0 0 p sig
16 S eries Di a p h r a g m S p r in g x x x x 4 515
2 07 b a r g
Instrumentation
Directory
183 Parker Hannifin Corporation 17

Analytical
Analytical
Analytical
Systems
Systems
Systems
Our chOem ur ich aem

l/peictraoOlc/uphreem ctrhoiem
ch aemlicpariolc/cpael stprso rocachneem aslsyitca icanalalplsyryo
tiscta eem lsssyaspntem raolvysitdicpearo l svyidsetems prov
a sounadsm ouonddelmfor odabesol otfhorunNbdor om thoN d
Aeorml e tfh
orricAbam onteharinN cdaornEtu h
arnA odpme Eeaurnricom apneaaraknnedm ts,Eau rkreotps,ean marke
DGDSWLDQGJDZSLWWLK
QJPZLQLWRD
KUGPP
DS LRQWGR
LQLUÀJP
FZ DRWLLG
WRKLQ
ÀP FVDLWQWRLRHUQQP
VYWR LURGRH LQÀQ
PFYDHLUWQLRRWQDQPOVVHWHRQJWHD
PQOHYVQ LHUWRJVQP
PDHVHQQWVWDODVVH JPHQWV
well aswleallbaorsaltaorbyorwaanetordll yapsialonlatdbpor p
lailnaottorm pylaaranknted m
tspa . irTlkohetetpsyl.aaTnlsht oemysae arkrlsveoetssa. esTrhaveyaaslsao ser ve as
basis fbor
aspisow for
erpaonw bdeaprshiasanfrdormpac phoaew rumetirac
cae lnau
dn tipcahalyal traimcnaac
al lsyeetiugm
ctaicl aen sleatgm
sn.aNen lyotitco sat.hlNesoregmothen er ts. No
single ssin
ugplpeliesur pcp
alinsein
or fgcfelaerna soum fpfeporrliee
arcm coa or
mnepolcefo ftem r, pad
alem vteaor,nead
cecvdoa,mnorpclead edte,a,or pad
taad vbalaenpcte
ad b,leor adap
samplseaamna pleysaisnaslysysastm iesm psl.yesa tena ml.ysis system.
Vent VReenco
tR
veco
ryVvP
eea
nrn
tyeRP
lea(Bco
nuellvele ry
ti(nB4u1ll4P
e1tia
-nVn
4
R1e)4l1-(VBR
ul)letin 4141-VR)
s 0RE ENsG0INREE REENDGICNOEM ERPEsADC0CTROIENM
SEPTNRAUGCM ITNIENNESRTTERDUM COEsM
N3TPYASCTTEM IsN S3ATYDRUSJUM
TESMETSNTAFODRJUVSAsTRSIA3FTOYIORSNTVESAM
RIINAATGDIOAJUNSS TSINFOGRASVARIATIONSING
PANELTHPAATNINECLLTUHDAETSINlCTLTUINDPGEASNElVLTATLIHNVAEGTSSINVCALULVDEESSlSUT TPINPGLYSPSVRUAEPLSVPSELUYSREP SREASNSDURmEOSSUW APSNPDLYmPORW ESSURESANDmOWS
STREAMSW TRIETACM
HINSGWVITACLHVEINSGRTERVEGAAULMVLAETSORWRESIGTCUHLAINTOGRSVALVEREGULATOR S
ANDGAUAGNEDSGAUGES ANDGAUGES
Vent VMeanst
tMera™st(V rt™
Ceae nlot(gCMa4t1aa4st
a l2 r1™42(-CVaM)
e4M)
o-gV talog 4142-VM)
s 0RE ENsG0INREE REENDGICNOEM ERPEsADC0CTROIENM
SEPTNRAUGCM ITNIENNESRTTERDUM
COEsM N#TPRAECATEIsNS S#ATRSEUTAMATBEELSNETAPSRET ASBSsLUER#EPRREWEASITTESHSUINRAETSHWTEAITBHLIENPTRHEES SUREWITHINTH
PANELTHPAATNINECLLTUHDAETSINRCELGUUDPLEASTNOERRELSGTHUALATTIONRCSLUDESRAENGAULYLAZTEORARNSHAELYLTZEERRVSEHNETLTHEERAAVNDEAENLRYTSZHEYERSATSDEHEMERLSTEYRSVTEEM NTHEADERSYSTE
GAUGESGRAOUTOGM ESETREORTOAM NEGTDEAURUCGATOENRSEADRNOUDTCOTOMREATNEsRDA0NROEVDIDUsEC0TAORNROAAVLNYIDSDEISAANCACLYUsSRIAS0CRAYOCW VCIUDTRHEACAYNAW LYITSHISAC
CURACYWITH
ASEPARAATESEPPREASRASTUEREPRCEOSNSATURSROELPLECARORNATREOPLLREERSSUREOCVOENRTAROVLOELENVRETRHAEAVDEENRTmHOEW ADOOEVFREmR OAW V3EO,NF0 T-
H EAD3E,R0m-OWOF 3,0
Instrumentation
Directory
18 18 18 184 Parker Hannifin Corporation

IntraFlow™ (Catalog 4250)
s -ODULARINSTRUMENTSYSTEM s 6ACUUMTOPSIG BARG
s )3! !.3)30COMPLIANT s 3YSTEMDESIGNSOF T WAREAVAILABLE
s %VER YCOMPONENTISUPGRADEABLETO
'EN.E33)4ECHNOLOGIES
R-max™ (Catalog 4140-R)

s 3UR FACEMOUNTTECHNOLOGYFOR s ,OWPRESSUREACTUATIONOF
STREAMSWITCHINGVALVES VALVES PSIG
s ,OWINTERNALVOLUMETOREDUCE s 2ATEDFROMVACUUMTO
SYSTEMPURGETIME PSIG BARG
ChangeOver System (Catalog 4511)

s #OMPACTTURNKEYMODULEDESIGNED s !UDIO VISUALALARMANNUNCIATOR
FORCONTINUOUSGASMANAGEMENT AV A IL A B L E
s /PTIONALOUTLETREGULATORTOCONTROL s !VAILABLEIN,ST AINLESSSTEEL
APPLICATIONSPECIlCOUTLETPRESSURE ANDBRASS
s !LUMINUMPANELISST ANDARD s 3UIT ABLEFOROX YGENSER VICE
Instrumentation
Directory

19
Regulators
Pressure Regulators
Z
ZZZSDUNHUFRPYHULIOR
ZZSDUNHUFRPYHULIOR
NPR4100 (Catalog 4511)

s .EGATIVEPRESSUREREGULATION s &ORDELIVER YOFLOWPRESSUREGASES
s )NTERNALLYTHREADLESSDESIGN FROMLIQUIDSOURCES
s #ONVOLUTED(ASTELLOY# ® s 7HITEKNOBINDICATESNEGATIVE
D I A P HR A G M P R E S S UR E
IR4000 Series (Catalog 4511)

s )NTERNALLYTHREADLESSDESIGN s 3EALSAVAILABLEFORNITROUSOXIDEAND
s #ONVOLUTED(ASTELLOY# ® HYDROCARBONAPPLICATIONS
D I A P HR A G M s ,OWDEADVOLUME
s )NTEGRALDIAPHRAGMSTOPSPREVENT s 'ENERALPURPOSEFORINSTRUMENT
OILCANNING ANALY ZERANDSEMICONDUCTOR
A PPLI C A T I ON S

s )NTERNALLYTHREADLESSDESIGN s 'REATERSENSITIVIT YFORPRECISE
s , ARGECONVOLUTED(ASTELLOY PRESSURECONTROL
# ®DIAPHRAGM s &ORANALY ZERSYSTEMGAS
MANAGEMENTANDINSTRUMENT
C A LIBR A T I O N
HFR900 (Catalog 4511)

s (IGHmOWREGULATOR s &ORCORROSIVEANDNONCORROSIVE
s 3ELF CONT AINEDREPLACEABLE mUIDAPPLICATIONS
VALVESEAT
Instrumentation
Directory

s $UALST AGEREGULATOR s 6IR TUALLYELIMINATESSUPPLY
s )NTERNALLYTHREADLESSDESIGN PRESSUREEF FECT
s #ONVOLUTED(ASTELLOY# ® s 0ROVIDESCYLINDERGASPRESSURE
D I A P HR A G M REDUCTIONINRElNERIESPROCESS
ANALY TICALSYSTEMSANDSPECIALT Y
GASES
APR66 (Catalog 4511)

s (IGHPRESSUREPISTONSENSING s 0RESSURESUPTOPSIG
R E GUL A T OR BARG
s ,OWACTUATINGTORQUE
Quantum 959 (Catalog 4511)

s 4IEDDIAPHRAGMDESIGNTOMINIMIZE s -ET ALTOMET ALDIAPHRAGMSEAL
REGULATORCREEP
s )NTERNALLYTHREADLESSDESIGN
DM3000 (Catalog 4518)

s -INIATUREPRESSUREREGULATORFOR s .OTHREADSINWET TEDAREA
GASINSTRUMENT ATIONAPPLICATIONS s #RITICALLYDAMPENEDTOIMPROVE
s !.3) )3!30MODULAR mOWST ABILIT Y
SUR FACEMOUNTINTER FACE s &ASTERPURGETIMES
P res sure Cv Bod y Material Connec tions
Re g ul a t o r M o d el M a x im um M a x im um O u t le t H a s t e ll o y Min Ma x F a c e S e al
Gr oups Series Ty pe I nle t P r e s s ur e P res sure Min Ma x 316L S S Br as s C -2 2 ® MONEL® FNP T FNP T Compr es sion or Tube Cat alog
A b s olu t e 2 5 0 p sig -26 in Hg to 10 psig
NPR410 0 0.0 2 0.15 x x x x 1/ 8" 3 / 8" x 4 511
Pressure 17 barg -1.8 in Hg to .7 barg
General 4 0 0 0 p sig 5 0 0 p sig
IR4 000 0.0 2 0.15 x x x x 1/ 8" 3 / 8" x 4 511
Purpose 276 b a rg 3 4 b arg
3 5 0 0 p sig 2 5 0 p sig
IR5 000 S ensitive 0.0 2 0.15 x x 1/ 8" 1/ 2" x 4 511
241 barg 17 barg
Single 5 0 0 p sig 15 0 psig
HFR9 0 0 Hig h F lo w 0.8 5 0.8 5 x x 1/4" 1/ 2" x 4 511
S tage 3 4 b arg 10 barg
Hig h 6 0 0 0 p sig 6 0 0 0 p sig
A PR6 6 0.0 4 0.0 4 x x 1/ 8" 1/4" 4 511
Pressure 414 barg 414 barg
Quantum T ie d 3 5 0 0 p sig 15 0 psig
0.0 4 0.20 x x 1/4" 1/4" x 4 511
9 59 Diaphragm 241 barg 10 barg
S ur f a c e
DM3 000 x 4 518
Instrumentation
Moun t
Directory

21
Regulators
Back Pressure Regulators
Z
ZZZSDUNHUFRPYHULIOR
ZZSDUNHUFRPYHULIOR
ABP1 (Catalog 4510)

s 2EDUCECONT AMINATIONANDACCU s #ONVOLUTED(ASTELLOY# ®
RATELYCONTROLBACKPRESSURE D I A P HR A G M
s )NTERNALLYTHREADLESSDESIGN s )NTEGRALDIAPHRAGMSTOP
ABP3 (Catalog 4510)

s )NTERNALLYTHREADLESSDESIGN s , ARGECONVOLUTED(ASTELLOY
s 0ROVIDESSENSITIVEPRESSURE # ®DIAPHRAGM
A DJU S T M E N T S s )NTEGRALDIAPHRAGMSTOP
BPR50 (Catalog 4510)

s &ORUSEWITHCORROSIVEAND s 0ISTONSENSEDHIGHPRESSUREBACK
NON CORROSIVEmUIDS PRESSUREREGULATOR
s !DJUST ABLEFROMPSI BAR
TOPSIBAR
Re g ul a t o r M a x im um I nle t H a s t e ll o y Min Ma x
Gr oups M o d el S e r ie s Ty pe P res sure Min Ma x 316L S S C -2 2 ® Monel® F NP T F NP T Cat alog
U p t o 5 0 0 p sig
A BP1 General Purpose 0.0 6 0.3 0 X X X 1/ 8" 1/4" 4 510
3 4 b arg
B ac k U p t o 6 0 p sig
A BP 3 S ensitive 0.0 6 0.3 0 X X 1/ 8" 1/4" 4 510
P res sure 4 b arg
U p t o 2 5 0 0 p sig
BPR5 0 Hig h P r e s s u r e 0.4 5 0.4 5 X 1/4" 1/4" 4 510
172 barg
Instrumentation
Directory

Vaporizing Regulators
ZZZSDUNHUFRPYHULIOR
ZZZSDUNHUFRPYHULIOR
AVR3 (Catalog 4512)

s 3TEAMHEATDESIGN s )NTERNALLYTHREADLESSDESIGN
s &IELDSER VICEABLEHEAT s )NTERNALLIQUIDVOLUMEONLYCC
TRANSFERELEMENT s #ONVOLUTED(ASTELLOY# ®
D I A P HR A G M
AVR4 (Catalog 4512)

s %LECTRICALHEATDESIGN s )NTERNALLYTHREADLESSDESIGN
s &IELDSER VICEABLEHEAT s VOR V (Z
TRANSFERELEMENT s #ONVOLUTED(ASTELLOY# ®
s #3! #ENELECAND!4% 8CER TIlED D I A P HR A G M
Re g ul a t o r M a x im um I nle t M a x im um O u t le t Min Ma x
Gr oups M o d el S e r ie s Ty pe Pres sure P res sure Min Ma x 316L S S MONEL® F NP T F NP T Cat alog
4 0 0 0 p sig 5 0 0 p sig
AV R3 S te am He ated 0.0 6 0.0 6 X X 1/ 8" 1/ 8" 4 512
Vaporizing 276 b a rg 3 4 b arg
Regulators Electric ally 4 0 0 0 p sig 5 0 0 p sig
AV R4 0.0 6 0.0 6 X X 1/ 8" 1/ 8" 4 512
He ated 276 b a rg 3 4 b arg
Instrumentation
Directory

23
Fittings
Fittings
ParPkaerrkInersIn trusmtruen
mten atitoantioTnubTeubFeittFinitgtin s gasreadreesdiegnsiegn
d eads alesalke-afrke-efree
concnoencnteiocntisonfor s fporropcreoscs,esps,ow po ewr, earn, danodil o
ainl dangdasgainssintrusmtruen
mtenatitoantion
appalpicpalitcioantisonhsanhdalnindglinlig
quliiqdusi,dgsa, sgeasseasndancdhecm heicm ailcsa
. ls.
3DU3NDHUUNҋVHULQ ҋVVLWQUXVP
WUXHPQWHWQXWEWHXEÀHWWLÀQWJWLVQJKVDYKHDYEHHHEQHHHQQJHLQQJHLHQUHHHGUHDGQGDQG
mam nuafnu acftac
uretudretod ctooncsoin stsenisttenly tplyropvrio dveidtheethheighhieghstelsetvleelvoefl roefliraebliialitbyi.lity.
+R+ ZR HZ YHHUYHQURQVR\VVW\HVPWHҋVPLQҋVWHLQJWUHLWJ\ULWV\FLVRP
FRSP OHSWHOHZ
WHLWK
ZRLWXKWRFXRWQFVRLQ
GVHLUGLQHJULQWKJHWKH
critcicriatilcla
inl klin
, tku,btin
ubgin. g.
ProPpreorpteurbteubseelseeclteiocntioanndanindsitnaslltaatliloantioanreakreeykeinygirnegdrieednitesnitns in
buiblduiinldginlegalke-afrke-e frereliraeblilaebtluebtiunbginsgysstyesmtesm .P sa . rPkaerrkienrsitnrusm truem ntent
ÀWWLÀQWJWLVQJDVUHDGUHHVGLH JVQLHJGQHWRGZWRRZUNRRUNQROLQ OLNPHDP
NH WHDULWDHOUVLD WOKVHWUKHHIRUHUHIRUVHWDVLQWDOHLQVOVHVV
VWHVHWOHÀHWOWLÀQWJWLVQJVVKRVXKORGXEOGHEXHVHXGVHRGQOR\Q ZO\LWK
ZLVWKWDVLQWDOHLQVOVHVVWHVHWOHWHXOEWLXQEJLQ7JKH7KH
SUDSFUWDLFFHWLFRHIP RIL[PLQL[JLQPJDP LVOVVLVWURVQWUJROQ\J
WHDULWDHOUVLD GO\LVGFLRVXFURDXJUHDGJH7GKH7KRHQOR\Q O\
H[FHH[SFWHLRSQWLRLVQELVUDEVUVDVÀVWWLÀQWJWLVQJZVLWK
ZLFWKRSFSRHSUSWHXUEWLXQEJLQJ
$OO$
ZOROZ
UNRLQUNJLQSJUHSVUVHXVUVHXVUHKVDYKHDYEHHHEQHHFQDOFDXOFDXWHODGWHXGVLX
QVJLQWKJHWKPHDP PX P
[LDP[XLP
alloawllo
awblaebsletresstrseslesvleelvsein ls ac
in cacorcdorandcaencweith wiA thNA SN IBS3 I1 B.31. .3.
C™PIF™itFtiitntgs
CPI ings
(Cat(C
aat
log
al o
4g2340/
0/4
2342332)33)
s 4HsRE4EHRPEIECPEIESCIM ESPILMEDPELESIDGENSITGONWTORW KORK s 3UsP3EURIPOERRBIOORDBYOSDEYATSSEUATRFSAUCREFAlCNEISlHNTISOH TO
ONAOLLNINASLLTIRNUSMTREUNMT AETNIOT ANTIGORNADGERATDUEBITNUGBING SEALSGEASLEGSASAENSDALNIQDULIIDQSUIDS
s -sO L-YBODLYEBNDUEMNU$M ISU$LlISDUELlCDOEATCEODATNEUDTSNUTS s 3IsN G3LIENFGELRERUFELERRTUELCEHTNECOHLONGOYLOTGOYPTROOVPIRDOEVIDE
TOPTROEVPERNETVEGNATLLIGNAGLLIANNGDAPNRDOVPIRDOEVIDE EXCELXLECNETLLEANTIA VNITBI RVAITBIORANTIPOENRFPOERRMFOARNMCEANCE
LUBRLIUCBARTICOANTION s % XsCE%LXLECNETLLEINNTHINGHHITGHHERTM
HEORMCYOCLCINYGCLING
s 3IsN G3LIENFGELRERUFELERRSUYLESTSEYMSTETRMEATTREEDATWEIDTHW ITH APPALIPCAPTLICOANTSIONS
3UP3AURCPAASREC™ASTEC™HTNECOHLONGOYLOTGOYINTOSUINRESURE
SEALSINEGALING
A-A
LO K® FitFtiitntgs
-LO ings
(Cat(C
aat
log
al o
4g2340/
0/4
2342332)33)
s )NsD U)NSDTRUYSSTRTYANSDT ANRDDADREDSIDGENSIFGONRAFOLLR ALL s "AsC" KAFECRKRUFELERRIUSLETRIESATTREEDATWEIDTHWITH
INSTIRNUSMTREUNMT AETNIOT ANTIGORNADGERATDUEBITNUGBING 3UP3AURCPAASREC™ASTEC™HTNECOHLONGOYLOTGOYPTROOVPIRDOEVAID EA
s 3IsLV3ERILVCEORATCEODATEHDRETAHDRSEATDOSTO STROSNTGROM NGECM HAENCHICAANLIGCRAILPGORINPTOHNETHUEBETUBE
REDURECDEUGCAELLIGNAGLLING s )NsD U)NSDTRUYSDTROYUDBOLEUFBELRERUFELERRDUELESIDGENSIFGONR FOR
SYSTSEYM STESMPECSIPlECCAITlICOANTSIONS
Instrumentation
Directory

MPI™ Fittings (Catalog 4234)
s #OMPRESSIONlT TINGFORMEDIUM s -OLYBDENUM$ISULlDECOATEDNUTS
PRESSUREAPPLICATIONSUPTO TOPREVENTGALLINGANDFORHIGHER
PSI BAR TEMPERATUREAPPLICATIONS
s )NVER TEDBODYANDNUTDESIGNFOR s )NST ALLATIONANDREWORKTIMEREDUCED
ADDEDSTRENGTHWITHTHICK WALLTUBING BY
s ,ONGERTHREADAREAFORIMPROVED
PER FORMANCEANDRESIST ANCE
TOVIBRATION
Phastite® (Catalog 4235-PH)

s /PTIONFORWELDEDSYSTEMS s .OLOOSEPAR TSSUPPLIEDFACTOR Y
s 3IMPLEASSEMBLYPROCESSPROVIDES PREASSEMBLED
HIGHINTEGRIT YCONNECTIONSlR STTIME s 0ERMANENTPUSHlTTUBECONNECTOR
EVER YTIME WITHWORKINGPRESSURESUPTO
s )NST ALLATIONTIMEREDUCEDTOSECONDS PSIBAR
Instrumentation Pipe Fittings (Catalog 4260)

s -ANUFACTUREDFROMST AINLESS s !LLEXPOSEDTHREADSPROTECTEDTO
STEELFORSUPERIORCORROSION PREVENTDAMAGE
R E SIS T AN C E s !LLPIPETHREADSMEET!.3)"
s !VAILABLEWITH.0 4AND)3/ R E Q U IR E M E N T S
THREADCONlGURATIONS
Welded Fittings (Catalog 4280)

s !VAILABLEINSOCKET WELD s 0ERMANENTLEAKFREECONNECTION
BUT T WELDANDAUTOMATIC s &ORCRITICALAPPLICATIONSANDHIGH
BUT T WELDCONNECTIONS TEMPERATURESSUCHASSTEAM
s -ANUFACTUREDTOMEET!3-%
3ECTION)))AND!.3)"
AND"CODES
Fit ting Wo r k i n g P r e s s u r e Connec tion Ty pe Si z e Ran ge

CP I ™ Instrument ation Tubing* S in g l e f e r r ul e c o m p r e s sio n 1/ 16" - 2" Tube Diameter
A - L O K® Instrument ation Tubing* D o u b l e f e r r ul e c o m p r e s sio n 1/ 16" - 2" Tube Diameter
MP I ™ Up to 15,0 0 0 psi (10 3 4 bar) Inver ted compression 1/4" - 1" Tube Diameter
®
Phas tite Up to 20,0 0 0 psi (1,3 8 0 bar) Permanent crimp* 1/4" - 1/ 2" ( 6 - 12mm )
Weld-lok™ Instrument Tubing* Tube Socket Weld 1/ 8" - 2" Tube Diameter
Pipe Up to 6 0 0 0 psi (414 bar) N P T Pip e T h r e a d 1/ 16" - 2" Pipe Size
P ipe A dap t er s Up to 6 0 0 0 psi (414 bar) NP T, B SP T, and B SPP Pipe Thre ads 1/ 8" - 1"
Instrumentation
*Ma ximum suggested working pressure a s indic ated in Instrument Tubing S election Guide Bulletin 420 0 -TS.
Directory

25
Hose/
ose/T
Hose/
ose/T
TubTin
ubg/Q
ing/Q
uick
uick
CouCpoluinpglin
s gs
Push-Push® -H
Lok Lok ®
ose H
(Bo
uls
lee
tin(B
42u8
ll e
1t-iB
n14-US
281)-B1-US)
s 5NIQUEsS E5ANLIEQNUSEUSRESALRENLISAUBRILEITSYRAENLIDAB ILIT YAsND)NNERLINsE)RNINSEARNLIENXETRRIUSDAENDESXYTRNUTDHEDTICS YNTHETIC
DURABILIT YDFUORRACBLIELIAT NY FEONRVCIRLEOANNM EENNVTIUROSNEMENTURSUEBBERRERSUIBSBT AENRTRTEOSPISETTARNOLTETUOM P EBTRAOSLEEUM BASE
s .OCLAMsP.SOORCLSAPMEPCISALOTROSOPLSECRIEAQLUTOIROELDS REQUIRED O I L A I RA N O
D I
L
W A T
I R
ER
A N DW A T E R
FORINST ALLFAOTRIOINST ALLATION
QuickQCo
uick
uplCo
inguspl(Cinatgas
log(C4at
22a0lo) g 4220)
s 3PILL FREsE3DPEISLLI GFNRESEVDIRETSUIAGLNLYSEVLIRMTUINAALLTYEELIMINsA$TEOUBLEsS H$UOT UOBFLFEmSUHSUHT M
OFAFTmINUGSHVAM
LVAETSIN GVALVES
mUIDLOSSmUUPIODNLODSISCUOPNONNECDTIISOCNONANDEC TIONANDSUIT ABLEFSOURIST AEBALEOFOFRM SEEDAILAOIFNFMEDIAIN
MINIMIZEM AIIRNINMCILZUESIAOIRNIDNUCRLUINSGIO NDURING CORROSIVECAOPRPROLISCIAVTEIOANPSPLICATIONS
CONNECTIOCNONNECTION s 7ORKINsGP7REOSRKSIUNRGESPRFREOSM SURESFROM
s -INIMIZsE - AIIRNINMCILZUESIAOIRNIDNUCRLUINSGIO NDURING PSIBAPRS ITOBAR TO
CONNECTIOCNONNECTION PSIPBSAIR BAR
StainlS
estai
s nSle
tesesl S
Mteteal
lMHeotsale H
(Co
ats
aelog(C4a6t9a0log
- M4
H6) 90 -MH)
s &OREX TRsE M
&OERCEOXNTRDEIM
TIOENCSOWNHDEITRIOENOSTHWEHREREOsTH E&REQUENsTL&YRUEQSUEDENFTOLRYTUHSEECDOFNOVRETYHAENCCOEN VEYANCE
HOSESFAILHOSESFAIL OFLIQUIDNOIFTRLOIQGUEINDNITROGEN
s &ORTEMsP E&ROARTUTERM
ESPUEPRATTOURESUPªT&O ª&s 0ROVIDEsS 0THREOVLOIDWEESSTTHPEELROM WEEASTTIOPNERRM ATEEA TIONRATE
ª# ª# OFANYHOOSEFAANVYAIHLAOBSLEAVAILABLE
ubuelt®itIunbsetrum
MultitM nsetnru
tmanedntHan
eadt Tr
THre
aace Tu
Tuabi
ceng
T bing
(Catalog(C4at
20a0lo-M
g4-12)00 -M-1)
s !VAILABsLE !INVAAILVAABRLIEETINYOAFVARIET YOF s -ATERIAsLS-
INACTLEURDIAELSCOINPCPLUERDESCT AOIPNPLEESRSST AINLESS
CONlGURACTIOONNlSGURATIONS STEELMETSATLEAELLOM
YSETAANLDAL0LO&Y!S0 AN4D&%0&! 0 4&%
s &ORCONsTA&INOM RCEONNTTATRINANMSEMNITSSTRIOANSAM NDIS SIONAND
CONTROLOFCPONETRUOM LOAFTIPCNSEIGUNMAALSTICGSAISGENSALSGASES
ANDLIQUIDASNDLIQUIDS
Instrumentation
Directory

Flow
Flow
Controllers
Controllers
ZZZSDUNHUFRPSRUWHULQVWUXPHQW
ZZZZZZSDUNHUFRPSRUWHULQVWUXPHQW
Z
SDZUZ
NHS
UDFURNP
HUSFRRUP
WHUSLQ
RVUWWHUX
ULP
QVHWQUX
W PHQW
PorterPInorstterurm Inenstrtusmpenectiaslipzeecsiainliztehse in
detshiegndeasnidgnmaannu d fm acatnu urefac ofture of
SUHFLVSLRUH
QFLQLVVLRWUQXP
LQHVQWUWXVP
IRHUQWKVHIRP
UHWKDHVXPUHPDVHXQUWHDPQHGQFWRDQQWGURFORRQIWOURRZ
OR
ÁIR
OR
ZZ ÁRZ
gasesgaansdesliqaunid sli.quids.
Gas G
Mas sMFas
loswFCo
low
ntCo
roln
letrs
rol(lCeatrsalo(Cg atFM
al o
- 4g4F
1)M- 441)
s 2ESPOsN2DSESTPOOANSDTSEPTOCAHASNTEGPECINHANGEIN s -ODEsLS - AVOADILEALBSLAEVWAILTAHBmLEOWIRTHANmGOEWSORAFNGESOF
SETPOINTSEINTPLEOSINSTTIHNALNESOSNTEHSAENCONEDSECOND SCCM TOSCC MTOSL PM .
SLPM.
s !CTUAsLm!OCWTUIASLSmTOAW BILIISZESDT AWBITLIHZIENDW ITHIN s (IGHPsRE(SIGSUHRPERMESOSDUERLESMHAOVDEELOSPHEARAVTEINOGPERATING
SECONDSSEVCIORNTUDASLLYVIWR TIUTHAOLLUYTWOIVTHEROSUHTOOOVTER SHOOPT RESSURPERSETSOSURESTOPSIGPSIBGARG BARG
DigitD
aligLiiq
taluid
LiqMuas
id sMFas
loswFCo
low
ntCo
roln
letrs
ol(lBeurls
leti(nBu
FlM
le-ti9n9F
8M) -998)
s 4HERMsA4LHMEERAMSAULRM EMEEANSUTRSEYM STEENMTSYSTEM s % XCLUSsIV%EXCLOUNSTIRVOELCOIRNCTURIOTRLYCIRCCOUM ITRBYINECDOMBINED
YIELDSAYCICEULDRASTEACMCUERAASTUERM EMEEANSUTREMENT WITHAPWIEIZTHOEALEPCITERZIOC EALECCTUTRAITCE DACCTOUNATREODLCONTROL
WITHLESWSITTHHALNESASTªH#ANINACREªA#SEINICNREASEIN VALVEPVROAVLVIDEEPSRFOAVSITDESSTAFBALSETCSOTNATBRLOELCAOTNTROLAT
mUIDTEMmPUIEDRATETUMREPERATURE LOWmOWLORWATmESOWRATES
FlowF
mloew
tem
rse(tCeatrsalo(Cg atFM
al o
-1g05
F8M) -1058)
s 6ARIABsLE6AREIAABmLEOW ARM EAETmEORW SM INCELTUEDR SEINCLUDE s )NTERCsH A)NTGEERACBHLAENmGOEWABTLUEBmEOAWSSTUEBME ASSEM
MMANDM M AM NDMSCAM LEMLENSCGATHLELENGTH BLIESANBDLIVEASLVAENSDAVLLAOLVWESCOANLLlOGWURCAOTNIOlNGURATION
TUBEASSTUEBMEBALISESSEMBLIES CHANGESCHWAINTHGOEUSTW REITM
HOOUVTARLEFRMOOMVALFROM
s !VAILAsB L!EVIANILEAIBTHLEERINFOERIGTHEEDRBFORDGYEODRB ODYOR PROCESSPSROYSCTEESM SSYSTEM
SIDE PLASTIEDCEO PNLSATREUCOTINOSNTRUCTION
InstrIunm
stern
utmPern
etsP
su
rere
ssRuerg
euRlaetgours
lat(Coatrsalo(Cg atFM
al o
-g10F5M
7)- 1057)
s !LLMOsD!ELSLMAROEDDEILRSEACRTEACDTIRINEGCTACTING s !VAILAsB L!EVWAILTAHBSLEPEWCIITAHLSPPOER CTILAOLCPAOTIROTNLSOC ATIONS
NON RELINEOVNIN GREALINEDVIANRGEACNLEDAANREEDCFLOERANEDFOR MANIFOLM DM ANOIFUONLDTCMOONUlNGTURCAOTNIOlNGSUROARTIONSOR
ANALY TICAANLAINLYSTTIRCUAMLIENNSTTRSUEM R VEINCETSER VICE WITHTHEWRIETHGUTHLAETORREGINUTLEAGTORARTIENDTEIGNRTOATAEDINTOA
s $ESIGsNE$DESSPIGENCEIlDCSAPLLEYCTIOlCPARLOLYVITDOEPHRIOGVHIDEHIGLHARGERM LAURGLTEI RFUM
NCUTLITOI NFUALNPCATICOKNAAGLEPACKAGE
RESOLUTIROENSOCOLUNTTIORONLCAOTNTHTREOLOAWTTmHOEW LO WmOW
RATEST YRPAICTEASLITNYPINICSATRLUINMIENNSTTARUTIMONENT ATION
APPLICATAIOPNPSLICATIONS
Instrumentation
Directory

27 27
PFA/PTFE
PF
A/PTFE
A/PTFE
Products
Products
Fluoropolymer
Fluoropolymer
Components
Components
ZZZZ
SZ
DUZNHSUDFUR
NHPUF
SRDP
UWHSND(Catalog
UWHN(Catalog
PSM Partek)
PSM Partek)
DurabDle u,ralebalek, flreeaekPfraereteP k aprrtoedkupcrtosdaurcetsusaered uinsead in a 3DU ÁD3UD HU3Á) D$ UH7
3X)E$H7 )XLWEWLHQJ
)V LWWL3QDJUVÁDU3HDÀU ÁWWDLQUHJVÀWSWLUQRJYVLGSHURYLGH
low dela odw vdoelu amd veo, lw
uhmiceh, w
dh eiccrheadseecsreta hseepsotshseibpiloitsysof ibilit y of
varietvyaorifein
tydoufsin trideus,stin
riecs,
ludinincglusdemingicsoemndiuccotnor
ductor par ticlpeaerntictrlaepemnetrnatpamnednbt aacntderbiaalcgteroriw althg.row th.
manum fac
anu turfin
acgt,ucrin hemg, cichaem l/foicoadl/pfohoadrm
/pac
hae rmutac
icaelu/ tical/
3DUJU3LSDU3J)U$ LS7 3X)E$H7 )XLWEWLHQJ
)VLWWLPQeJrVfecPt efor freacpt pfolircat
apiopnlicsations
biomebdioicmael dpircoaclepsrsoin cegs, sains gw, eallsawseallnaaslyatincalytical wherewehaesree of eaassesof emabslsyeismablryeiqsuaireremqeunirte. m Ge ronot.vGedrooved
msen
instruin trutamtien
ont.ation. tubingtuisbninogt riseqnuoitreredq. uired.
3DUER3QDGUE3R)Q$G)
3X)V$LE)OHXV
3LLESOHH)3LLWSWLHQJ
)VLWWLPQaJrbVon
Pdarbond
3DU WH3
NDÁUXWHRNURÁSXRRO\URPSHRUO\SP URHGUXSFUWRVGDXUFHWVUHDFUR
HP UHPFHRQPGP HGHQGHG ÀWWLQJVÀZWWLHQOJGVHGZGHHOGVHLJGQGHHOVLP VLWQKDUHWHDVGWHKGUHFDRGQHQGHFWRLRQQQVHFWLRQV
LJLQDHWOHLP
for apfor
plicaaptpiolincsattihoantsen thcaot uenntceorupnrteesrspurreesssbuereloswbelow and enatrnadpe mnetrnatpam reeanst anredacsre aantdescraealeteask afreleeackofn reneectoionnn.ection.
120 p1s2ig0 (p8s.2ig7(b 8a.2rg
7),ban rgd),caor nrdos cor
iveros mievdeiamaetdia at 3)$33LS )$ H)3LLWSWLHQJ )V LWWLAQvJaVilaAblveain la a
ble vain riet
a yvaofriety of
FRQÀJFXRUDQWÀLRJQXVUD WDLROOQZVLWKDOVOWZ
DLQWKGDVUWGDQ1G3D7UGWK1U3 HD7GWVKUHDGV
tempetemratu preersatupretso u4p00° to F40(20° 0F4°(C2)0. 4F°lCuor). o
Fp luoor
lyompeorlymer
YDOYHYVDDOYQHGVÀDWWQLQGJÀVWWRLQIIJHVUFRRIIUHUURFVR QGDUHPFA VPaFlvAeV
LRUQURSVULRWQHFSWULRRWQHFDWQLRGQDDUH sa,G lva eu sg ,G e aPuro gteeP ctrorts e,cT tohresr,m Tohc eorm upolceouple
) L W W LQ J
)VLWWDLQJ GV6DSQUG D\6* SUXDQ\V* HXiQ gV hcH ycigleh lcifyec, la
ell ife, all
used utoseen d stouren em suerdeiam/seydsiatemysptuem rityp. uTrhitey.wTehtetew d etted ÁXRURSÁRXOR\UP RSHRUOF\RPQHVUWUFXRFQWLVRWQUX FZWLWRKQDSZSLWOKLFDWSLRSQOLFWDHWVLR
WHQGWHDVQWGHGDQG
surfacseusrfacof easll opfroadllupcrtosdaurcetsofacrehem of cichaem lly icinaellryt inert provenprdoevsein gndse. signs.
corros ionros
cor reisoinstraenstisPta Fn At or
P PTor FEP. TPFaE rt.ePk aprrtoedkupcrtosducts 37)(3 97D)OY(H9 VD 5OYHHJ VX O5DHWRJUXVODDWRQUGV)DORQZ GP )OHRWZ HUP VH WHUV
DUHDYDDUHLODDEYODHLOIDUR
EPOH IU¼RP X
SWRXSLWQRVL]HLQVL]H :HW WHG :DHUWHWHDGVDDUUHHDP VDDQUHXIP DFDWQXXUHIDGFIWUXRUPHGÁIXURP URSÁRXOR\UP RS HRUO\PHU
materim
alatwehriicahl w
ofhfiecrhs of
unfemrsatucnhm
edatccohrerodscioonrro
psroiotencptiroontection
and high cycle life
Instrumentation
Directory

San
San
San
ita
ita
ita
ryryry
aa
nan
dndB
dB
io
Bio
P
ioP
hPh
aha
rm
arm
rm
ace
ace
ace
uti
uti
uti
ca
ca
ca
lll
ParPkaeP rrkaP errekre Pfror

eP rm fe
ora rfm
norcam encaSentacSinl etaS einltsaseinlsisseasisscao ism caopmcleoptmeleplin
teleelinteoelin f soeaf nsoiaftansriaytanrityar y
ÀWWLÀQWJWLÀVQWJWLYVQDJOYVDHOVYYDHDOVQ
YHGDVQUHG
DOQDUG
HWHOD
UGHWHOÁDGRWHZ
ÁGR FZÁRRP FZRSP FRRQSP
HRQQ SWHRVQIWHRVQUIWXRVVUIHR
XUVLQHXVDLQH
YDLQUYLD
HDWUY\LH
D WU\LH W\
of hoyf ghoiyef gn hiyecgnp iiecrnopiccreopscrseoin scsg
eisnasgpinpaglpicp aalpitcipoaln
itcisoa.ntiTsoh.neT
ss.heTeshperospderuopcdrtu oscdm tuscem testemtehteetehtethe
strin
stgrinsentg rinten sgtten
asntdasantrd ada nsrddraesrqdruesiqrreuediqre ubdiyrebpdyrobpcyreopscrseoor scsesorsin
ssor tin
hsetin hfoetohfdo e,ofbd oe,ovb
dee , rvbaeegrveae,grea,ge,
daidrya,idrba yi,o irbpyi,hobapirh oma prhamanrda mnhd aenahdletha hle& thabl& tehab&ueta byuein tayu
din
tuysdinturisdetusris.etsri.es.
San
San
iS
taan
irtyairtFa
yirtFytin
tFtgin
tstg
in
(s
Cgat(s
C
aat
l(oCg
aat
lo
4ag
2l7o40g2)7402)70)
s "UsT T"WsUET"TLDWUETCTLW
DLAEM CLDLPAMCBLPEAVM EBPLESVBEAELTVSE)LA SLTIEN)AE TLIN)E LINEs !sFU!LLsFLIUN!LELFLUOINLFLEALIODNFAEPAODTEFARAPSDTEFAORPSRTETFHOR SREFTAOHDRETDAHDREADDED
ANDAONTDHAEONRTDHlEOT TRTIHNlEGTRTISlNTTGYTLISENTSGYALSEVTSAYILALEAVSBAALIELVAABILLEABLE mANmGAENDmGAAENNDDGAESNDODCAKSNEODTCSW KOEECTLKDWECETOLW DNECNLOEDNCCTNIOEONCNNTSIEO CNTSIO NS
s 5NsP5OsNLIPS5HONELIPDSOH)LEI$ SDH)EA$DND)A$
UNNDPAUONNLDIPSUHONELIPDSOH/LEISD$H/E D$/ $A LSOAALSVOALIASLAVOBAALIELVAABILLEABLE
"OTH"O)T$" HO)AT$HND)A$/ND$A/ NAD$ RE/AM$REILLAM
ORERILLM
TUOIM RLLTBOULRM ETBULM EBsLE3
AsN3ITsANR3YITAATNURIYBTAITNRUGYBIATNUNGBDIANTNUGDBAITNUGDBIHTNUAGBNIHGNAEGNRHSGAENR SGER S
lNISlHNEIDSlHNEISDHED AVAIALAVBAALIELVAATBOILLEACBTOOLM ECPTOOLM ECTPOELM AENTPEYLEAPTNERYOAJPNERCYOTPJERCOTJECT
VaV
lvae
Vlvsaela
vsn
eas
dnaFdnloF
dw
lo
FwC
loow
CmoCpm
oop
m
neopne
notne
snt(s
n t(sCaat
Cat l(oCg
aat
lo
4ag
2l7o40g2-7V
402
F-7C
V0)F-C
VF
) C)
s 3AsN3ITsANR3YITAAVNREIYRTASVRIEOYRNSVSIEOORNSFSISOOANM
FSSPOALFMESPABLM EALPLBLEALLBALLs 6AsLV6EsASLV6AERASELVAPERSEACPRIRSEEIOCPNIRSEIM COINASNIM OUNAFANM CUTAFUANRCUETFDUARCETDURED
BUT TBEUR mT BTYEURATmTNEYDRAmCNYHDEACNKHDEVCAHKLVEVECASKLVAVEVASALVIALEAVSBAALIELVAABILLEABLE FROMFROHM EFRAOTHMTERAAHTCETERAATBCTLEREACM BELEAATBM ELREAIATM ELSRAIATENLSRDIA LNSDA ND
s !sC O!M
sCPO!LMECTPOELM LEINTPEELELOITNEFEPLIONFEPUONMFEAPUTNMICEAUATM NICDAATINCDA ND DESIDGENSEDIGDENSTEOIGDPNTEORDFPOTEORRM PFOEURRM NFODRUEM NRDTUHENERDTM HEREOSTM
HTEOSMTOST
ELECETLREICETALRECICTUTARAICCTTOUARACSTOUARNASTDOACRNSODNACTNRODONLCTROONLTROL EXACETXINAECGXTICANOCGNTICDNOIGTNIOCDONITNSIODNITSIONS
ACCEASCSCOAECRSICSEEOSSRIS# EOSHROIE#OSHSOE#OFHRSOEOM FSROETRMFARDOTIRMTAIODTNIRTAIOLDNITAIOLNsA!LVsA!
ILAsVBA!LIELVAAW
BILLIEATHBWLAEITVHWAAIRTIHVEATAYRIVEOATFRYEIEOLATFYSETOLOAFMSETELOARM
STEORMSER S
RACKR AACNKRD AACPNKIDN AIPONINDNISPOTINYLISEOTNOYRLSETSYOT ALREISNOTLERASISNSTLAEISNSLE SS ANDAONTDHAEONRTDHCEOURTSHTCOEURM SCTEOURM S STEOPRM E CSEIPlRE ESCDPIlEECDIl ED
STEESLTW EESALTSEW HEALDSW OHW ADSNOHVW DENORSW VIEONRNSVSIEORNSSIONS CONClOGNUClROAGNTUIlORGANTUSIROTANOTSIEOTNNOSSUETNROESEUANRPESEUARFEPEECARTPFEECRTFECT
lTWlITHWIlNITTHAWNINIYTHAPINNRYOACPNERYSOSPCIERNOSGCSEISNSYGSITSNEYGM SSTEYM S T EM
Instrumentation
Directory

29 29 29
ools
Tools
and
and
Accessories
Accessories
Tube T
Fuabe
ricFaatbiorincaEtqiounipEmqeunipt m en
(Cat t g(C4at29a0lo)g 4290)
al o
s (IGHQUsA(LITIYGHHAQNUDALBITEYNHDAENR SDBTUENBDEER STUBEs 0AR ,OKs®0WARE,NOCKH®ESWW REITNHCHESªWITHª
CUT TER SDCEUBTUTERR STODOELSBUARNRDTOPORELSSEATNTDOOPLRSESETTOSONLSAP ACTISONNAFPO RACmTEIOXINBIFLOITRYmEXIBILIT Y
s 4UBEBEsN4DUEBR SEFBREONMDER⁄ SFTROOMS IZETOSIZEs 0RESETsIN S0TRAELSLAETTIOINNSKT AITLSLAFTOIORNASKSITESM FO RASSEM
s 4UBECUsT T4EURBREATCEUDTTFEORRRATEDSTFAOIRNLESSST AINLESSB L I N GT U B E
BLlI N
T G
T IN
T U
G B
SE
I
NlCT T
L I
O NSGE
SSIPN
ACCLEOSESPACES
STEELTUBISNTGEELTUBING
SamplSeam
CyplliendCeyrs
lind ers
(Cat alog(C4at
16a0lo-S
gC4)160 -SC)
s PsSIGPBSAIGRG $/B4ARRAGT ED$/4RATEDs !.3) !s3 - !.%3 ")!3-
%IN"TERNALPIINPTERNALPIPE
SAMPLECSYALIM NDPELRESCYLINDER S T HR E A D S T HR E A D S
s 3T AINLEsSS3STTAEIENLECSOSNSTERUECLTCIONSTRUCTION
BrassBPras
ussh-Pto
u-sCo
h-tnon-Co
ectnFniettcin
tgFsitt(iBnug
llestin(B3u5l3le1t-iQ
nR35G3/1US
- QAR)G/USA)
s 0RESTOLsO K0®REBSRTAOSLSOKA®NDBR0ARSESSTAONLDOK0)R)E®S TOLOsK)%)®QUIPPsED%W
QUITIHPPSET ADINWLEITSHSSSTTAEIENLEGSRSABSTEELGRAB
COMPOSITCEOPMUPSOHS TITOE CPOUNSNHE TCOT lCTOTNINNGESCTlT TINRGINSG SELIMRINGASTINEGLIM NEINEADTIFNOGRTNUEBEEDFORTUBE
AREDESIGANREEDDFEOSRIGUNSEDWFIOTHRUNSYELOW NITHNYLONSUPPOR TSSUPPOR TS
POLYETHYLPEONLEYEPTHOYLYLEUNRETHPAONLEYUARNEDTH ANEANDs .OTOOLsS. REOQUTOIROELDSRFOEQRUIREDFOR
SOF TMET ASLOTFUTBMINEGT ALTUBING INST ALLATIOINNST ALLATION
s )DEALFOsRP)DNEEAULMFOARTIPCNEUMATIC s $ESIGNsED$FEOSRIGSINDEED LFOOARDSINIDGE LOADING
APPLICATIOANPSPLICATIONS
Instrumentation
Directory

Process Control Manifolds PDF

Uploaded by

Copyright:

Available Formats

Process Control Manifolds PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Process Control Manifolds PDF

Uploaded by

Copyright:

Available Formats

Process Control Manifolds

© 2009 Parker Hannifin Corporation TTP 06/09

Process Control Manifolds

2 Parker Hannifin Corporation

Close Coupled Instrument

Introduction The complete range of Manifold

With many years of manifold development Parker Hannifin offers

In addition to manifolds, Parker Hannifin offer the broadest range

This directory is intended as an overview to the range of

Key to Flow diagrams

Flow diagram A Flow diagram B Flow diagram C

Flow diagram D Flow diagram E Flow diagram F

Remote Mount Remote Mount Remote Remote Mount Remote Mount

See Flow See Flow See Flow

2 Valve Carbon Steel Manifold Mounting Brackets

3051 Transmitter manifolds

See Flow See Flow See Flow

See Flow See Flow See Flow See page 18

Custody Transfer/Fiscal metering Remote Mount High Pressure

See Flow See Flow See Flow

3 & 5 Valve Carbon Steel Manifold Mounting Brackets See Cat4190-FM

Bar Stock Needle Bar Stock Needle Rising Plug

See See See

Multi-port Gauge Single port Gauge Outside Screw & Yoke

See See See

Swivel Gauge Adaptors

Distribution Manifold Distribution Manifold Swivel Gauge Adapter

Pressure Measurement Flow Measurement

See Flow See Flow

For high performance information refer to

PTFree™ connection can be applied to any 2, 3 or 5 valve

Double Block and Bleed Manifolds and Flanged Products

Flange to compression Kidney flanges to For detailed product

See See See

Pro-Bloc® DBB manifold Monoflange DBB manifolds

Manifold and Enclosure Sub-Assemblies

For key only - part no.

Standard manifold globe style bonnet design

6. Valve Bonnet 9. Gland packing (adjustable)

8. Thrust Bush 11. Spindle tip

Page 15 Application illustrations.

Page 16 Ball valve specification.

Outside screw and yoke (O.S.&Y.)

Page 18 Globe style needle valve specification.

Page 19 Bolted bonnet.

Page 20/23 Monoflange (MF) manifolds.

Page 24/30 Pro-Bloc® (PB) manifolds.

Page 31/32 Meeting the ISO Standard

Page 33/39 Fugitive Emission solutions

14 Parker Hannifin Corporation

Primary, secondary and vent valve applications and installations

Pro-Bloc ® [2] Hi-Pro [4]

35 kgs 7 kgs 5 kgs 3 kgs

15 Parker Hannifin Corporation

Ball valve specification

16 Parker Hannifin Corporation

Outside screw and yoke (O.S.&Y.) Features

17 Parker Hannifin Corporation

“H” Series globe style needle valve

Single isolate. specify FEPB165, FEPB265.