HOUSEHOLD AND I&I

FORMUL ATION GUIDE

 TABLE OF CONTENT

L AUNDRY
LAUNDRY DETERGENT “UNIVERSAL” 4
LAUNDRY DETERGENT FOR HAND WASH 5
SOFTENER WITH ODOUR CONTROL 6
KITCHEN
HARD SURFACE CLEANER HAND DISHWASHING DETERGENT 17
THICKENED CHLORINE BLEACH 7 HOUSEHOLD DISHWASHER RINSE AID 18
ALL PURPOSE HARD SURFACE CLEANER 8 OVEN CLEANER 19
SPRAY & WIPE HARD SURFACE CLEANER 9
DISINFECTION DETERGENT 10 SPECIAL
FLOOR CLEANER 11 SPONGE IMPREGNATION 20
GLASS CLEANER 12 SHOE REFRESHER SPRAY 21
REFRIGERATOR CLEANER “ODOUR ABSORBING” 13 FABRIC REFRESHER “ODOUR NEUTRALIZER” 22

BATHROOM CAR WASH

ECO FRIENDLY TILE & BATH CLEANER 14 HIGH-PRESSURE CAR CLEANER 23
VISCOUS WC CLEANER 15 MILD CAR WASH SHAMPOO 24
TOILET LIQUID RIM BLOCK 16 TOUCHLESS CAR WASH CONCENTRATE 25
 F O R M U L AT I O N G U I D E – L AU N D R Y F O R M U L AT I O N G U I D E – L AU N D R Y

L AUNDRY DETERGENT “UNIVERSAL” L AUNDRY DETERGENT FOR HAND WASH

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w
A Aqua 84.90 Aqua 81.50
A
B Carboxymethyl Cellulose 0.50 Acrylates Copolymer, 30 % 5.00
PERLASTAN L-30 PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 5.00 Sodium Lauroyl Sarcosinate, 30 % 3.00
(Schill+Seilacher GmbH) (Schill+Seilacher GmbH)
Alcohol Alkoxylate 4.00 PERLASTAN SCG 50
Disodium Cocoyl Glutamate, 50 % 2.50
C POLYFIX ZRC 30 MT (Schill+Seilacher GmbH)
Zinc Ricinoleate 2.50 B
(Schill+Seilacher GmbH) Alcohol Alkoxylate 3.50
GLDA, 47 % 3.00 Glycerin 2.00
Defoamer 0.10 Optical Brightener 0.50
D Sodium Hydroxide, 10 % qs to pH GLDA, 47 % 2.00
E Enzymes, Fragrances, Colour, etc. qs C Sodium Hydroxide, 10 % qs to pH
D Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE MANUFACTURING PROCEDURE

n Heat Part A up to 50 °C n Mix Part A
n Maintain temperature and add Part B while stirring n Add Part B and mix until formulation is homogeneous
n Homogenize n Adjust pH-value with Part C while stirring
n Cool down to room temperature while stirring n Add Part D
n Add Part C in listed order
n Adjust pH-value with Part D while stirring PROPERT Y
n Add Part E Appearance: white, turbid, viscous liquid
pH-value: 8.0 – 9.5
PROPERT Y
Appearance: clear, viscous liquid
pH-value: 8.0 – 9.5

4 5
 F O R M U L AT I O N G U I D E – L AU N D R Y F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R

SOF TENER WITH ODOUR CONTROL THICKENED CHLORINE BLEACH

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w

Aqua 95.50 Aqua 58.70

A
Carbomer 0.50 A Potassium Hydroxide, 45 % 2.30
POLYFIX ZRC 30 MT GLDA, 47 % 0.50
Zinc Ricinoleate 2.00
(Schill+Seilacher GmbH) Myristyldimethylamine Oxide, 25 % 2.50
B
STRUKSILON FB PERLASTAN L-30
Amino Functional Silicone Polymer, 50 % 2.00 B Sodium Lauroyl Sarcosinate, 30 % 1.00
(Schill+Seilacher GmbH) (Schill+Seilacher GmbH)
C Citric Acid qs to pH Sodium Hypochlorite, 15 % 35.00
D Fragrances, Colour, etc. qs C Citric Acid qs to pH
D Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE MANUFACTURING PROCEDURE PROPERT Y

n Mix Part A in listed order *) n Mix Part A Appearance: colourless, viscous liquid
n Add Part B and mix until formulation is homogeneous n Add Part B in listed order to Part A pH-value: 11.5 – 12.0
n Adjust pH-value with Part C while stirring n Mix until formulation is clear
n Add Part D n Adjust pH-value with Part C
*) can be quicker and better dissolved at 30 – 40 °C n Add Part D

PROPERT Y
Appearance: turbid, viscous liquid
pH-value: 4.0 – 5.0

6 7
 F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R

ALL PURPOSE HARD SURFACE CLEANER SPRAY & WIPE HARD SURFACE CLEANER
Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w

Aqua 85.50 Aqua 88.80

A Propylene Glycol n-Butyl Ether 5.00 A Propylene Glycol n-Butyl Ether 3.00
Potassium Hydroxide, 45 % 1.00 GLDA, 47 % 0.50
PERLASTAN C-30 PERLASTAN L-30
Sodium Cocoyl Sarcosinate, 30 % 3.50 Sodium Lauroyl Sarcosinate, 30 % 1.50
(Schill+Seilacher GmbH) (Schill+Seilacher GmbH)
B B
Alcohol Alkoxylate 3.00 Isopropyl Alcohol 5.00
GLDA, 47 % 2.00 Lauryldimethylamine Oxide, 30 % 1.20
C Fragrances, Colour, etc. qs C Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE PROPERT Y MANUFACTURING PROCEDURE PROPERT Y

n Mix Part A in listed order Appearance: colourless, clear liquid n Mix Part A in listed order Appearance: colourless, clear liquid
n Add Part B in listed order to Part A and mix pH-value: 11.5 n Add Part B in listed order to Part A and mix pH-value: 10.0 – 11.5
until formulation is clear until formulation is clear
n Add Part C n Add Part C

8 9
 F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R

DISINFECTION DETERGENT FLOOR CLEANER

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w

Aqua 52.00 Aqua 94.50

GLDA, 47 % 1.00 A Propylene Glycol 0.50
Isopropyl Alcohol 32.00 GLDA, 47 % 2.00
PERLASTAN L-30 PERLASTAN C-30
Sodium Lauroyl Sarcosinate, 30 % 2.00 B Sodium Cocoyl Sarcosinate, 30 % 3.00
A (Schill+Seilacher GmbH) (Schill+Seilacher GmbH)
Alcohol Alkoxylate 6.00 C Citric Acid qs to pH
Hydroxyethyl Laurdimonium Chloride 5.00 D Fragrances, Colour, etc. qs
POLYFIX ZRC 50 TB
Zinc Ricinoleate 2.00
(Schill+Seilacher GmbH)
B Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE PROPERT Y MANUFACTURING PROCEDURE

n Mix Part A in listed order Appearance: clear liquid n Mix Part A in listed order
n Mix until formulation appears homogeneous pH-value: 9.0 – 10.0 n Add Part B to Part A and mix until
n Add Part B formulation is clear
n Adjust pH-value with Part C while stirring
n Add Part D

PROPERT Y
Appearance: colourless, clear liquid
pH-value: 6.5 – 7.5

10 11
 F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R F O R M U L A T I O N G U I D E – H A R D S U R FA C E C L E A N E R

GL ASS CLEANER REFRIGERATOR CLEANER “ODOUR ABSORBING”

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w
Aqua 89.95 Aqua 80.00
A
Isopropyl Alcohol 7.00 Ethanol or Isopropyl Alcohol 10.00
PERLASTAN M-30 POLYFIX ZRC 30 MT
A Sodium Myristoyl Sarcosinate, 30 % 0.75 Zinc Ricinoleate 5.00
(Schill+Seilacher GmbH) (Schill+Seilacher GmbH)
Propylene Glycol n-Butyl Ether 2.00 PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 3.00
Sodium Citrate 0.30 (Schill+Seilacher GmbH)
B
B Fragrances, Colour, etc. qs Sodium Citrate 0.50
GLDA, 47 % 0.50
Benzalkonium Chloride 1.00
C Citric Acid qs to pH
D Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE MANUFACTURING PROCEDURE PROPERT Y

n Mix Part A until formulation appears homogeneous n Mix Part A Appearance: colourless, clear liquid
n Add Part B n Add Part B in listed order and mix until pH-value: 9.0 – 10.0
formulation appears clear
PROPERT Y n Adjust pH-value with Part C
Appearance: colourless, clear liquid n Add Part D
pH-value: 7.0 – 8.0

12 13
 F O R M U L AT I O N G U I D E – B AT H R O O M F O R M U L AT I O N G U I D E – B AT H R O O M

ECO FRIENDLY TILE & BATH CLEANER VISCOUS WC CLEANER

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w
Aqua 91.80 A Aqua 30.50
PERLASTAN L-30 Myristyldimethylamine Oxide, 25 % 3.50
Sodium Lauroyl Sarcosinate, 30 % 2.00
(Schill+Seilacher GmbH)
A PERLASTAN L-30
Coco Glucoside, 52 % 1.50 Sodium Lauroyl Sarcosinate, 30 % 3.00
(Schill+Seilacher GmbH)
Sodium Citrate 4.50 B POLYFIX ZRC 30 MT
Zinc Ricinoleate 2.00
GLDA, 47 % 0.20 (Schill+Seilacher GmbH)
B Citric Acid qs to pH Sodium Hypochlorite, 15 % 60.00
C Fragrances, Colour, etc. qs GLDA, 47 % 1.00
C Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE PROPERT Y MANUFACTURING PROCEDURE PROPERT Y

n Mix Part A in listed order and mix until Appearance: colourless, clear liquid n Mix Part A Appearance: colourless, clear gel
formulation is clear pH-value: 4.5 – 5.0 n Add Part B in listed order to Part A and mix until pH-value: 11.0 – 12.0
n Adjust pH-value with B while stirring formulation is clear
n Add Part C n Add Part C

14 15
 F O R M U L AT I O N G U I D E – B AT H R O O M F O R M U L AT I O N G U I D E – K I T C H E N

TOILET LIQUID RIM BLOCK HAND DISHWASHING DETERGENT

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w

A Aqua 75.00 Aqua 74.30

A
B Carbomer 2.00 MGDA, 78 % 0.20
MGDA, 78 % 1.00 Sodium Laureth Sulfate, 28 % 15.00
POLYFIX ZRC 30 MT PERLASTAN L-30
Zinc Ricinoleate 2.00 Sodium Lauroyl Sarcosinate, 30 % 2.00
(Schill+Seilacher GmbH) (Schill+Seilacher GmbH)
C B
Sodium Laureth Sulfate, 30 % 15.00 Cocamidopropyl Betaine, 38 % 1.50
PERLASTAN L-30 Glycerin 2.00
Sodium Lauroyl Sarcosinate, 30 % 5.00
(Schill+Seilacher GmbH) Sodium Chloride 5.00
D Sodium Hydroxide, 10 % qs to pH C Citric Acid qs to pH
E Preservatives, Fragrances, Colour, etc. qs D Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE MANUFACTURING PROCEDURE

n Heat Part A up to 50 °C n Mix Part A
n Maintain temperature and add Part B while stirring n Add Part B in listed order to Part A
n Mix until preparation appears homogeneous and mix until formulation is clear
n Cool down to room temperature while stirring n Adjust pH-value with Part C
n Add Part C in listed order n Add Part D
n Adjust pH-value with Part D
PROPERT Y
n Add Part E
Appearance: clear, colourless, viscous liquid
PROPERT Y pH-value: 5.5 – 6.5

Appearance: clear, colourless gel

pH-value: 8.0 – 9.0

16 17
 F O R M U L AT I O N G U I D E – K I T C H E N F O R M U L AT I O N G U I D E – K I T C H E N

HOUSEHOLD DISHWASHER RINSE AID OVEN CLEANER

Part Active Ingredient Trade Name % w/w Part  Active Ingredient Trade Name % w/w

Aqua 68.60 Aqua 77.00

A PERLASTAN L-30 A Sodium Hydroxide, 10 % 15.00
Sodium Lauroyl Sarcosinate, 30 % 2.00
(Schill+Seilacher GmbH)
GLDA, 47 % 2.00
Alcohol Ethoxylate 19.40
B PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 2.00
Propylene Glycol n-Butyl Ether 10.00 B (Schill+Seilacher GmbH)
C Citric Acid qs to pH Decyl Glucoside, 52 % 2.00
D Fragrances, Colour, etc. qs C Alcohol Ethoxylate 2.00
D Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE MANUFACTURING PROCEDURE PROPERT Y

n Mix Part A n Mix Part A Appearance: colourless, clear liquid
n Add Part B to Part A and mix until formulation n Add Part B and mix until pH-value: 12.5 – 13.0
appears clear formulation appears clear
n Adjust pH-value with Part C n Add Part C
n Add Part D

PROPERT Y
Appearance: colourless, clear liquid
pH-value: 2.5 – 3.5

18 19
 F O R M U L AT I O N G U I D E – S P E C I A L F O R M U L AT I O N G U I D E – S P E C I A L

SPONGE IMPREGNATION SHOE REFRESHER SPRAY

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w

A Aqua 60.90 Aqua 95.90

Carbomer 1.50 A POLYFIX ZRC 30 MT
B Zinc Ricinoleate 3.00
(Schill+Seilacher GmbH)
Allantoin 0.10
Alcohol Alkoxylate 1.00
PERLASTAN L-30 B
Sodium Lauroyl Sarcosinate, 30 % 25.00
(Schill+Seilacher GmbH) Preservative 0.10
C Decyl Glucoside, 52 % 5.00 C Citric Acid qs to pH
Cocamidopropyl Betaine, 38 % 7.00 D Fragrances, Colour, etc. qs
Aloe Barbadensis Miller 0.50
D Sodium Hydroxide, 10 % qs to pH
E Preservatives, Fragrances, etc. qs

MANUFACTURING PROCEDURE PROPERT Y MANUFACTURING PROCEDURE

n Add Part B while stirring to Part A *) Appearance: turbid, colourless liquid n Mix Part A
n Mix until formulation appears homogeneous *) pH-value: 6.5 – 7.5 n Add Part B and mix until formulation

Viscosity: 550 – 620 mPa*s appears clear

n Add Part C in listed order
(Brookfield, Sp.3, 5 rpm, RT)
n Adjust pH-value with Part D (original pH: 5.3 – 5.5) n Adjust pH-value with Part C
n Add Part E n Add Part D
*) can be quicker and better dissolved at 30 – 40 °C
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 7.0 – 7.5

20 21
 F O R M U L AT I O N G U I D E – S P E C I A L F O R M U L AT I O N G U I D E – C A R WA S H

FABRIC REFRESHER “ODOUR NEUTRALIZER” HIGH-PRESSURE CAR CLEANER

Part  Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w

Aqua 85.00 Aqua 73.00

A POLYFIX ZRC 25 GP A MGDA, 78 % 5.00
Zinc Ricinoleate 5.00
(Schill+Seilacher GmbH)
GLDA, 47 % 5.00
B Ethanol 10.00
PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 2.00
C Fragrances, etc. qs (Schill+Seilacher GmbH)
Decyl Glucoside, 52 % 3.00
B
Alcohol Ethoxylate 2.00
Triethanolamine 2.00
Lauryldimethylamine Oxide, 30 % 8.00
C Citric Acid qs to pH
D Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE MANUFACTURING PROCEDURE PROPERT Y

n Mix Part A n Mix Part A Appearance: colourless, clear liquid
n Add Part B and mix until formulation appears clear n Add Part B in listed order and mix pH-value: 11.0 – 11.5
n Add Part C until formulation appears clear
n Adjust pH-value with Part C
n Add Part D
PROPERT Y
Appearance: colourless, clear liquid
pH-value: 9.5 – 10.5

22 23
 F O R M U L AT I O N G U I D E – C A R WA S H F O R M U L AT I O N G U I D E – C A R WA S H

MILD CAR WASH SHAMPOO TOUCHLESS CAR WASH CONCENTRATE

Part Active Ingredient Trade Name % w/w Part Active Ingredient Trade Name % w/w

Aqua 73.00 Aqua 74.00

A MGDA, 78 % 5.00 A MGDA, 78 % 7.00
GLDA, 47 % 5.00 GLDA, 47 % 7.00
PERLASTAN L-30 PERLASTAN L-30
Sodium Lauroyl Sarcosinate, 30 % 5.00 Sodium Lauroyl Sarcosinate, 30 % 2.00
(Schill+Seilacher GmbH) (Schill+Seilacher GmbH)
B B
Sodium Laureth Sulfate, 30 % 5.00 Decyl Glucoside, 52 % 4.00
Cocamidopropyl Betaine, 38 % 2.00 Alcohol Ethoxylate 4.00
C Citric Acid qs to pH C Sodium Hydroxide, 10 % 2.00
D Fragrances, Colour, etc. qs D Fragrances, Colour, etc. qs

MANUFACTURING PROCEDURE PROPERT Y MANUFACTURING PROCEDURE PROPERT Y

n Mix Part A Appearance: colourless, clear liquid n Mix Part A Appearance: colourless, clear liquid
n Add Part B in listed order and mix pH-value: 8.5 – 9.0 n Add Part B in listed order and mix pH-value: 11.5 – 12.5
until formulation appears clear until formulation appears homogeneous
n Adjust pH-value with Part C n Add Part C
n Add Part D n Add Part D

24 25
 S C H I L L + S E I L A C H E R AT A G L A N C E

BOEBLINGEN PIRNA
SPECIALITY CHEMICALS FOR: SPECIALITY CHEMICALS FOR:

FIBRES SILICONES
TEXTILES PU INDUSTRY
LEATHER PAPER
PAPER TEXTILES
WWW.SCHILLSEIL ACHER.DE
COSMETICS COSMETICS
FINE CHEMICALS FIBRES
LEATHER
DIN EN ISO 9001:2015
DIN EN ISO 14001:2015 DIN EN ISO 9001:2015

DIN EN ISO 500001:2011 (ONLY FOR BOEBLINGEN PRODUCTS)

RSPO CERTIFICATION MASS BALANCE

HUDSON / OHIO / USA

HAMBURG PRODUCER OF:
SPECIALITY CHEMICALS FOR:
NANOFIBRE MATRICES
Disclaimer:
RUBBER ADDITIVES
ANTIFOAMS DIN EN ISO 9001:2015

EPOXY PREPOLYMERS DIN EN ISO 13485:2003 The mentioned attributes and application proposals are only non-binding application possibilities and
AND FL AME RETARDANTS
application proposals for our products. Our advice and recommendations whether verbal, in writing or by
L ATEX ADDITIVES
SILICONES STOW / OHIO / USA way of tests do not excuse the customer from his or her own examination regarding the applicability for the
RELEASE AGENTS SPECIALITY CHEMICALS FOR: intended procedures and purposes. The mentioned attributes and application proposals are no assurance
for a certain further processing. Any assurances must be agreed upon explicitly and in writing between the
DIN EN ISO 9001:2015 PL ASTICS
DIN EN ISO 14001:2015 WOOD COMPOSITES customer and us.
DIN EN ISO 500001:2011 RUBBER
LEATHER
We also advice you, that any further processing and the distribution of the further processed products is
DIN EN ISO 9001:2008 part of the customers sole scope of responsibilities as the producer of the new product.

26
 Any Questions?
Our service team will be pleased to answer any questions
and assist you with advice and information. We can also
provide you with contact data of our local offices, distributors
and agencies. Data sheets and samples of our products
are available upon request.

For more information please contact:

Schill+Seilacher GmbH
Schoenaicher Strasse 205
71032 Boeblingen (Germany)
Phone: + 49 7031 282-0
Fax: + 49 7031 282-446
E-Mail: [email protected]

Visit also our site:

www.schillseilacher.de
KHM02.2019