"Student Management System": A Microproject Report ON
"Student Management System": A Microproject Report ON
MICROPROJECT REPORT
ON
SUBMITTED BY:
CERTIFICATE
This is certified that Mr. KADAM YOGESH BAPUSAHEB, GIRME PRATHMESH MAHADEV
,GAIKWAD GANESH ARUN. Roll No 3,5,11 of Sixth Semester of Diploma in
ComputerEngineering of institute HSBPVT’s Parikrama Polytechnic, Kashti (Code:1169) has
completed the micro-project satisfactorily in course Programming in Python(22616)for the
academic year 2019-2020as prescribed in the curriculum.
Sr.
Content Page No.
No.
1 Introduction 1
2 Aim 2
3 Course Outcome 3
4 Procedure Following 4
5 Resources used 7
6 Output 8
7 Learning from micro-project 10
8 Conclusion 11
9 References 12
INTRODUCTION:
User module
Student Module
Mark management
In the Software we can register as a user and user has of two types, student and
administrator. Administrator has the power to add new user and can edit and delete a
user. A student can register as user and can add edit and delete his profile. The
administrator can add edit and delete marks for the student. All the users can see the
marks.
1
AIM:
The project entitled “ Student Management System” is aimed at providing basic knowledge
Student Management System. Even if he/she doesn’t have any knowledge of Student Management
System
2
COURSE OUTCOME:
4] Handle exceptions.
3
PROCEDURE FOLLOWED:
INPUT DESIGN
Input design is the process of converting user-oriented input to a computer based
format. Input design is a part of overall system design, which requires very careful
attention. Often the collection of input data is the most expensive part of the system. The
main objectives of the input design are …
INPUT DATA:
The goal of designing input data is to make entry easy, logical and free from errors
as possible. The entering data entry operators need to know the allocated space for each
field; field sequence and which must match with that in the source document. The format
in which the data fields are entered should be given in the input form. Here data entry is
online; it makes use of processor that accepts commands and data from the operator
through a key board. The input required is analyzed by the processor. It is then accepted
or rejected. Input stages include the following processes
Data Recording
Data Transcription
Data Conversion
Data Verification
Data Control
Data Transmission
Data Correction
One of the aims of the system analyst must be to select data capture method and
devices, which reduce the number of stages so as to reduce both the changes of errors
and the cost. Input types, can be characterized as.
External
Internal
Operational
Computerized
Interactive
Input files can exist in document form before being input to the computer. Input
design is rather complex since it involves procedures for capturing data as well as
inputting it to the computer.
4
Outputs from computer systems are required primarily to communicate the
results of processing to users. They are also used to provide a permanent copy of these
result for latter consultation. Computer output is the most important and direct source of
information to the users. Designing computer output should proceed in an organized well
through out the manner. The right output must be available for the people who find the
system easy o use. The outputs have been defined during the logical design stage. If not,
they should have defined at the beginning of the output designing terms of types of
output connect, format, response etc.
External outputs
Internal outputs
Operational outputs
Interactive outputs
Turn around outputs
All screens are informative and interactive in such a way that the user can full fill
his requirements through asking queries.
Controlled Redundancy
Data independence
Accurate and integrating
More information at low cost
Recovery from failure
Privacy and security
Performance
Ease of learning and use
5
RESOURCES USED:
Sr.
Name of Component Specification Qty
No.
Windows7
System
1 Minimum 1
RAM 2GB
Software
2 pycharm 1
6
OUTPUT:
7
LEARNING FROM MICRO-PROJECT:
8
CONCLUSION:
In The project entitled “Student Management System” we get the basic knowledge of Student
Management System. Even if he/she doesn’t have any knowledge of Student Management
System
9
REFERENCES:
[1] Text books
[2] Refrence books
[3] Technical websites
10