Scribd Logo
Upload

Welcome to Scribd!

  • 78 views

    gc250 Eng

    Uploaded by

    Sarmad Bashir
    This document describes the GC250 controller for single generator sets. It has capabilities for auto-start, mains failure detection, power measurements, engine protections, and generator protections. It interfaces with electronic and non-electronic engines and has configurable digital and analog inputs/outputs. The GC250 has a large LCD display, USB update capability, data logging, and is compact with an IP65 rating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    gc250 Eng

    Uploaded by

    Sarmad Bashir
    78 views4 pages
    This document describes the GC250 controller for single generator sets. It has capabilities for auto-start, mains failure detection, power measurements, engine protections, and generator protections. It interfaces with electronic and non-electronic engines and has configurable digital and analog inputs/outputs. The GC250 has a large LCD display, USB update capability, data logging, and is compact with an IP65 rating.

    Original Title

    gc250_eng

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the GC250 controller for single generator sets. It has capabilities for auto-start, mains failure detection, power measurements, engine protections, and generator protections. It interfaces with electronic and non-electronic engines and has configurable digital and analog inputs/outputs. The GC250 has a large LCD display, USB update capability, data logging, and is compact with an IP65 rating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    78 views4 pages

    gc250 Eng

    Uploaded by

    Sarmad Bashir
    This document describes the GC250 controller for single generator sets. It has capabilities for auto-start, mains failure detection, power measurements, engine protections, and generator protections. It interfaces with electronic and non-electronic engines and has configurable digital and analog inputs/outputs. The GC250 has a large LCD display, USB update capability, data logging, and is compact with an IP65 rating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

     NEW AUTO-START and AMF (Automatic Mains Failure) controller for single gensets

     3 Phase mains (utility) sensing


     3 Phase generator sensing
     3 x CTs Inputs
     True RMS measurements: kW, kVA, kVAr, pf, kWh (phase & total)
     4 Configurable Digital Inputs
     3 Analogue Inputs + 1 Extra Analogue Input (instead of a digital Input) + 1 for D+
     4 Configurable Digital Output + 2 Digital Output 10A
     Interface for MPU and J1939 engines as standard
     USB serial port for configuration and FW update
     Large LCD display 128x64 with LED backlight and ICONES
     Compact dimensions: 144(W)x108(H)x40(D)mm (34mm)

     Attractive price  IP65 as protection degree with gasket always included as standard
     Periodical test
     Outstanding
     Real Time clock
    performances including
    AND/OR logics  Data recording: 64 Events log (64 slow trend and 42 fast trend)
     Remote start and stop
     Alternative configurations
    especially used for rental  Built in alarm sounder
    sets
     Free configuration software BOARD PRG
     User friendly, intuitive and
    easy to use

     Italian design
    Additional measures available based on the Isolated
    and Auto-supplied CAN J1939 .
    GC250 is the newest controller made by SICES for single
    stand-by gensets.
    The same controller can be also used for AUTO START
    applications. A set of high efficiency LEDs are used for signalling the
    Despite the compact dimensions, GC250 includes the main current status of the Generator Set and for the
    engine and alternator protections like the engine speed, oil visualization of alarm occurred. By means of ICONES it
    pressure, coolant temperature, frequency, voltage, current, is possible to realize the type of the alarm/shutdown
    power and fuel level.
    The same controller can be used for electronic engines with Engine protections
    CAN interface J1939 protocol and MPU engines (non-  Fuel reserve
    electronic) as well.  Min./Max. fuel level
    Configuring the Inputs, Outputs and protections, GC250 can be
    easily adapted to suit a wide range of applications.
     Min./Max. battery voltage
    GC250 offers a wide, graphic and powerful resolution display  Min./Max. oil pressure
    128x64 pixel providing ICONS for alarms/warning advices and  Min./Max. water temperature
    for signalling the status of the engine, controller and data logs  Max. Power (32P)
    as well.  Closing of mains contactor or genset contactor failed
    All parameters can be easily configured through USB using the
     Engine over crank
    free software tool (BoardPrg), which can be downloaded
    thorough Sices website. It is also possible to set them directly  Over speed from generator frequency
    through GC250 keyboard.  Belt breakage
     Operating conditions not reached
     Emergency Stop
    Mains Voltage:
    L1-N, L2-N, L3-N, L1-L2, L2-L3, L3-L1 Generator protections
    True RMS measure  Underfrequency (81U)
    Max 300Vac CAT III (L-N)  Overfrequency (81O)
    Max 520Vac CAT III (L-L)  Undervoltage (27)
    Generator Voltages:  Overvoltage (59)
    L1-N, L2-N, L3-N, L1-L2, L2-L3, L3-L1
     Time dependent overcurrent (51)
    True RMS measure
    Max 300Vac CAT III (L-N)  Instantaneous overcurrent (50, 50V)
    Max 520Vac CAT III (L-L)  Phase sequence (47)
    Generator Currents:  Current and Voltage unbalance (46/47)
    L1, L2, L3
    True RMS measure. Mains protections
    Rated current: 5A  Min./Max. mains voltage (27/59)
    Generator and Mains Frequency meter:  Min./Max. mains frequency (81U/81O)
    Resolution = 0.1 Hz.
    Accuracy = ±50ppm, ±35ppm/°C (typical)  Mains failure
    Battery Voltmeter:
    Resolution = 0.1V
    Oil Pressure Gauge:  N. 4 Configurable digital Inputs
    VDO 0-10 Bar, VDO 0-5 Bar, Veglia 0-8 Bar
    (Settable curve based on sensors available)  N. 3 Analogue Inputs + N.1 Additional digital Input, which
    Water or Oil Thermometer: can be used as analogue + N.1 Analogue Input for D+ (if not
    VDO, Veglia, BERU used in this way, they can be used as not isolated digital
    (Settable curve based on sensors available) Inputs)
    Fuel Level:  N. 4 Configurable digital voltage source Outputs
    VDO, Veglia  N. 2 High power digital voltage source Outputs (10A) for fuel
    (Settable curve based on sensors available) solenoid and engine start.
    Engine revolution counter:  Built tin alarm sounder
    By frequency detection.  Engine diagnostic code
    D+ for the measure of the voltage alternator battery
     Real Time Clock with internal rechargeable Lithium battery
    charger
     Periodical test
    Power and power factor measures are available as total  AND/OR Configurable logics
    measures and for each single phase too.
    Maximum power and current reached values, are Operating temperature: -30°C to 70°C
    registered with date and time. Storage temperature: -30°C to 80°C
    Dimensions: 141(L)x113(H)x39(P)mm - Weight: 200g
    Cut-Out dimensions: 18x92mm
    Protection degree: IP65 (with complimentary gasket).
    The display of GC250 offers a full set of info,
    providing clear symbols and code concerning the
    alarm occurred.
    In case of multiple alarms, the display offers a clear
    notification of all the failures with the related
    symbol and code.
    When an ECU engine is connected, the description
    of the alarm is available as well.

    You might also like