English PDF

CR318C high pressure common rail injector test bench
Installation and operation manua

CR318C
1. Operation guide
1.1Refueling and connecting electricity
The required voltage of this machine is AC 380V. Before starting the equipment, please confirm the
power supply voltage and wiring mode of the machine. The specific operation is as follows:
Fill up oil as shown in Diagram 1.1
1: Diesel fuel tank, please add special 4113 test pump oil (if not have, you can use clean diesel
replace), the amount of oil is added to the side scale More than 70%.
Diagram 1.1
380V voltage ,Diagram 1.2
Power on, as shown in Diagram 1.2

R S T connected to three-phase live wire
1
CR318C
1.2 Switch Button Operating Instructions

1.1. Turn on the main power switch (the first step of all operations)
Turn the red power main switch on the right side of the device clockwise (to the horizontal direction)
as shown in Diagram 2.0. At this point, the entire device will be turned on and the PC will be
Automatically starts, the computer display lights up and is displayed as a test interface.
Button description and schematic diagram2.1

CR318C
2.Operation guide
2.1Testing high pressure common rail injector (external)
1.Turn on the main power switch (the first step of all operations)
Turn the red power main switch on the right side of the device clockwise (to the horizontal direction). At
this point, the entire device will be turned on and the PC will start automatically.
The screen lights up and is displayed as a test interface.
3
CR318C
3.Overview of the test operation process

1. Interface operation ,select the injector model
The computer interface is currently displayed as the home page automatically . and the automatic
test is selected. Steps: Next - enter the model, search – select injector number, load - start (as
shown in Figure 5.1 5.2 5.3)
Diagram5.1
Diagram5.2
Diagram5.3
5
CR318C
3.1est Interface Overview Test
1 interface specific function overview
6
CR318C
4.Maintanance instructions and common troubleshooting
4.1Maintanance instructions
1.Check all pipelines every week, no oil leakage is allowed, otherwise the measurement accuracy will
be affected.
2.Need to clean the Y filter after testing 100 injectors (Twist the screw cap to clean the internal filter),
can be reused, as shown in Diagram 7.2.
①
②
Diagram7.2
3. For each injector with 200 injections, clean the filter shown in Diagram 7.2 (Twist the transparent glass
and clean inside the Copper filter), can be reused.
4.For each 1000 injectors tested, replace the filter shown in Diagram 7.3. This filter is not reusable.
Diagram7.3
7
CR318C
4.2Common troubleshooting
1. Replace the rail pressure sensor
When the computer interface pops up the pop-up window as shown in Figure
8.1, please check the rail pressure sensor (if you need to replace the
sensor ,need keep same as the original model)
Diagram8.1
2.Check DRV
When the computer interface pops up the pop-up window as shown in Figure 8.2, please check if the
motor rotates. If it rotates, check if the DRV is loose or broken.
(If the motor does not turn, this pop-up window will pop up).
Diagram8.2
3.View the nozzle connection line

When the computer interface pops up the pop-up window as shown in Figure 8.3, please check
whether the two ends of the nozzle connection line are connected and check whether the nozzle
connection line is broken.
Note: If there are other faults during the normal operation of the test bench, and the computer interface
does not pop up the pop-up window prompt, please contact the relevant technical personnel of our
company.The staff will help you solve it so as not to affect your work progress.
Diagram8.3
8
CR318C
5.After-sales and maintenance
5.1How to connect network and network services
9
CR318C
6.Technical parameters
Name parameters
Power supply 380V AC 220V AC(optional)
Phase three phase signal phase（optional）
Frequency 50Hz/60Hz
Current 30A（MAX）
Main motor power 4KW/6 level
Control loop voltage DC12V/24V 350W
ECU internal boost - 0-200V DC(MAX)
Oil tank volume 18L
Diesel tank volume 18L
Oil temperature control method Heating/forced cooling
MAX CR pressure 260MPa/MAX
Flow meter (injection) 4-550ml/min
weight 400KG
Appearance net size 1280*820*1600（L*W*H）
Wooden box after packaging 1400*1000*1750（L*W*H）

English PDF

Uploaded by

Copyright:

Available Formats

English PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

English PDF

Uploaded by

Copyright:

Available Formats

CR318C high pressure common rail injector test bench

Installation and operation manua

380V voltage ,Diagram 1.2

Power on, as shown in Diagram 1.2

1.2 Switch Button Operating Instructions

Button description and schematic diagram2.1

3.Overview of the test operation process

3.1est Interface Overview Test

1 interface specific function overview

4.Maintanance instructions and common troubleshooting

3.View the nozzle connection line

5.After-sales and maintenance

5.1How to connect network and network services

Power supply 380V AC 220V AC(optional)

Phase three phase signal phase（optional）

Main motor power 4KW/6 level

Control loop voltage DC12V/24V 350W

ECU internal boost - 0-200V DC(MAX)

Oil tank volume 18L

Diesel tank volume 18L

Oil temperature control method Heating/forced cooling

MAX CR pressure 260MPa/MAX

Flow meter (injection) 4-550ml/min

Appearance net size 1280*820*1600（L*W*H）

Wooden box after packaging 1400*1000*1750（L*W*H）

You might also like

Appearance net size 12808201600（LWH）

Wooden box after packaging 140010001750（LWH）