Chemistry Project: Study of Constituents of An Alloy

CHEMISTRY PROJECT
AIM- Study Of Constituents Of An Alloy
Name –Manish Paliwal

Board roll no-
Contents
PAGE NO
1. Acknowledgement 3/13
2. Introduction 4/13
3. Aim of the experiment 5/13
a- General obje tive
b- Specific objective
4. Materials Required 6/13
5. Theory 7/13
6. Details of procedure and 9/13
Observations
7. Conclusion 12/13
8. Bibliography 13/13
9. Signature 13/13
Acknowledgement
I, Manish Paliwal of class Xll A express my
gratitude to my school authorities for allowing
me to undertake the project titled
Alloy Analysis
I naturally could not have done justice to my
delicate assignment, had I not been privileged to
get the animate guidance from
Mrs. Shalini Singhal, Chemistry teacher of
Central Academy Sr. Sec. School, chittorgarh
I also express sincere thanks to my
family who extended helping hand in completing
this project.
Manish Paliwal
Signatures:
Student Internal External

Examiner Examiner
Introduction
An alloy is a homogeneous mixture of two
or more metals or a metal and non-metal.
They are generally harder than their
components with reduced malleability and
ductility. Alloys are prepared to enhance
certain characteristics of the constituent
metals, as per requirement.
In this project, we shall qualitatively analyze
the chemical composition of two alloys: Brass
and Bronze
Aim of the Experiment
General objective:
This project is being carried out with a
view to increase the appreciation of alloy-
analysis as an important branch of chemistry.
The hands-on laboratory experience gained is
highly beneficial in understanding the general
procedure of qualitative analysis of an
unknown sample.
Specific objective:
In this project, we shall be
analyzing the constituents of Brass
and Bronze.
Materials Required
1) Brass and Bronze pieces
2) China dishes
3) Filtration apparatus
4) Nitric acid
5) Hydrogen sulphide gas
6) Ammonium hydroxide
7) Ammonium chloride
8) Potassium ferrocyanide
9) Ammonium sulphide
10) Dil hydrochloric acid
11) Mercuric chloride
Theory
Brass
Brass contains Cu and Zn . Both dissolve in
nitric acid.
4Zn+ 10 HNO3= 4Zn(NO3)2 + N2O + 5H2O
3Cu + 8 HNO3= 3Cu(NO3)2 + 4H2O+2NO
Further analysis is carried out for respective ions.
Cu dissolves in H2S to give black ppt. of CuS. It is filtered
to get the soln of Zinc Sulphide. It precipitates out in the
form of ZnCl2 in an ammoniacal soln. of Ammonium
chloride. The precipitate is dissolved in dilute HCl and
then treated with Potassium ferrocyanide to get a bluish-
white ppt. of Zn2[Fe( N)6].
Bronze
Bronze contains Cu and Sn. Their nitrates are obtained
by dissolving the sample in conc. Nitric acid. The nitrates
are precipitated as sulphides by passing H2S through their
solution in dil. HCl.
The CuS is insoluble in yellow a onium sulphide, while
SnS is soluble. The ppt. is separated by filtration.
The ppt. is dissolved in conc. HNO3 and then
Ammonium hydroxide solution is passed through it.Blue
colouration confirms the presense of Cu.
The filtrate is treated with conc. HCl followed by Zinc dust
to obtain SnCl2 . Then HgCl2 solution is added. Formation
of slate-coloured ppt. indicates the presence of Sn.
SnS2 +HCl(conc.)= SnCl4 + H2S
SnCl4 +Fe= Sn l2+Fe l2
SnCl2 + HgCl2 = Hg2 l2 + SnCl4
Details of
Procedure/Observations Brass:
1. A small piece of brass was placed in a china
dish and dissolved in mini um quantity of
50%conc.HNO3.
2. The soln. was heated to btain a dry residue.
The residue was dissolved in Dilute HCl.
3. H2S gas was passed and a black.ppt. was
observed. The soln. was filtered and the ppt.
was dissolved in NH4OH soln. A blue coloration
observed indicates the presence of Cu.
4. The filtrate was tested for presence of Zn.
Ammon um hydroxide and chloride solutions
were added and then H2S gas was passed. A
dull grey ppt. was separated and dissolved in
dil. HCl followed by addition of Potassium
ferrocyanide. A bluish white ppt. confirms the
presense of Zn.
Bronze:
1. The sample was dissolved in 50% HNO3 and
then heated to obtain nitrates.
2. The nitrates were dissolved in dil. HCl and

then precipitated as sulphides by passing H2S
gas.
3. The precipitates were treated with yellow
amm.sulphide when a part of it dissolves.
The soln. was filtered.
4. The ppt. was tested for Cu as in the case of

brass.
5. The filtrate was treated with conc. HCl followed
by Fe dust.
6. Then HgCl 2 soln. was added. Formation

of a slate-coloured ppt. confirmed the
presence of Sn.
Conclusion
Brass contains Copper and
Zinc.
Bronze contains Copper
and Tin.
Bibliography
1. Comprehensive Practical
Chemistry- Class 12.
2. Inorganic Chemistry
by Ashelesh Dashora
Signatures:
Student Internal External

Examiner Examiner

Chemistry Project: Study of Constituents of An Alloy

Uploaded by

Copyright:

Available Formats

Chemistry Project: Study of Constituents of An Alloy

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Chemistry Project: Study of Constituents of An Alloy

Uploaded by

Copyright:

Available Formats

CHEMISTRY PROJECT

AIM- Study Of Constituents Of An Alloy

Name –Manish Paliwal

Student Internal External

2. The nitrates were dissolved in dil. HCl and

4. The ppt. was tested for Cu as in the case of

6. Then HgCl 2 soln. was added. Formation

Student Internal External

You might also like