Scribd Logo
Upload

Welcome to Scribd!

  • 136 views

    Floor 400 BA: Surface Hardener in Powder Form

    Uploaded by

    Mahmoud
    floor 400 BA is a surface hardener for concrete floors. It is a powder made of selected aggregates, cement, and additives that is economical and recommended for both indoor and outdoor use. floor 400 BA provides high abrasion resistance and strength, making it suitable for floors that experience heavy traffic, such as in parking areas, warehouses, and industrial facilities. It is packaged in 25kg bags and applied by spreading it over freshly laid concrete to harden the surface.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Floor 400 BA: Surface Hardener in Powder Form

    Uploaded by

    Mahmoud
    136 views2 pages
    floor 400 BA is a surface hardener for concrete floors. It is a powder made of selected aggregates, cement, and additives that is economical and recommended for both indoor and outdoor use. floor 400 BA provides high abrasion resistance and strength, making it suitable for floors that experience heavy traffic, such as in parking areas, warehouses, and industrial facilities. It is packaged in 25kg bags and applied by spreading it over freshly laid concrete to harden the surface.

    Original Description:

    Weberfloor 400 BA

    Original Title

    Weberfloor 400 BA

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    floor 400 BA is a surface hardener for concrete floors. It is a powder made of selected aggregates, cement, and additives that is economical and recommended for both indoor and outdoor use. floor 400 BA provides high abrasion resistance and strength, making it suitable for floors that experience heavy traffic, such as in parking areas, warehouses, and industrial facilities. It is packaged in 25kg bags and applied by spreading it over freshly laid concrete to harden the surface.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    136 views2 pages

    Floor 400 BA: Surface Hardener in Powder Form

    Uploaded by

    Mahmoud
    floor 400 BA is a surface hardener for concrete floors. It is a powder made of selected aggregates, cement, and additives that is economical and recommended for both indoor and outdoor use. floor 400 BA provides high abrasion resistance and strength, making it suitable for floors that experience heavy traffic, such as in parking areas, warehouses, and industrial facilities. It is packaged in 25kg bags and applied by spreading it over freshly laid concrete to harden the surface.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    floor 400 BA Formerly "Floortop.

    400 BA" FLOORING

    Surface hardener in powder form

    PRODUCT
    floor 400 BA is a ready to use surface hardener for
    concrete made with selected aggregates (Silica, Basalt…),
    cement and additives. It is an economical floor hardener
    recommended for internal and external use. With its high
    abrasion resistance and strength, floor 400 BA is a heavy
    duty concrete surface hardener particularly recommended
    for heavy traffic floors.

    SCOPE OF USE
    • Parking areas
    • Auto show rooms
    • Warehouse
    • Industrial floors
    • Corridors
    • Lobbies & Waiting rooms
    PACKAGING
    CHARACTERISTICS Leb Syria Jordan UAE Qatar Kuwait KSA Oman
    Color Grey 25 Kg 25 Kg 25 Kg 25 Kg 25 Kg 25 Kg 25 Kg 25 Kg
    Grain size < 4 mm 50 Kg 50 Kg 50 Kg 50 Kg 50 Kg 50 Kg 50 Kg 50 Kg
    Powder density 1.40
    Abrasion resistance 0.99 mm/1000 rev (Tinius
    Olsen wearometer C.D.R)
    Compressive Strength
    (ASTM C 109:99) Immediately, use a power float or a trowel to obtain the
    7 days 45 MPa requested smooth finish.
    28 days 55 MPa During the following days after application, protect the
    Flexural Strength surface from sunshine and wind.
    (ASTM C 580) A proper curing improves the performances of floor
    7 days 10.1 N/mm² 400 BA.
    28 days 12.2 N/mm²
    Moh’s Hardness 8-9 CONSUMPTION
    Moderate traffic: 4 to 5 kg/m²
    Heavy traffic: 5 to 7 kg/m²
    INSTRUCTIONS FOR USE
    PREPARATION OF THE SUBSTRATE
    For a good aspect, the fresh concrete must not contain too STORAGE
    much air or water. As per technical recommendations and 12 months after manufacturing date in original and non-open
    state of art, joints should be created regularly to prevent packaging , under cover, in dry condition, away from humidity,
    cracks: usually each 25m². Before applying floor 400 protected from extreme temperatures and direct sunlight.
    BA, the concrete should be leveled and the excess water
    removed. SAFETY PRECAUTIONS
    The product contains cement powders which, when mixed
    PRODUCT PREPARATION with water, release alkalis that could be harmful to the skin. It
    When the concrete is prepared, spread floor 400 BA is preferable to do the application a well ventilated area, to
    regularly on the surface. For obtaining a constant quality, the wear protective gear for hands, eyes and respiratory system
    quantity of dry shake hardener per m² must be the same all and to avoid dust inhaling. Splashes on the skin should be
    over the surface. Spread two-third of the floor 400 BA washed away by cleaning with soap and water. In case of
    needed. Wait until the product gets wet in contact with the contact with eyes, wash thoroughly with clean water. If
    concrete. Then spread the remaining one-third of floor swallowed, do not induce vomiting. In both cases seek
    400 BA. medical attention. The product is non-flammable.

    1/2 Technical data sheet . Edition: 03.15-A www.sodamco-weber.com


    floor 400 BA FLOORING

    DISCLAIMER
    While the company guarantees its products against defective
    materials, the use and application of these products are
    made without guarantee since the conditions of their
    application are beyond its control. It is recommended to
    verify with the company that the product is suitable for the
    intended use, and that this Data Sheet version is the latest
    one. The company may modify it without prior notice. Technical
    characteristics are listed for guidance only. For more
    information, please contact the company’s office in your
    location.

    NOTE
    The information included on this Technical Data Sheet is the
    sole property of weber. The unauthorized disclosure, use,
    dissemination or copying (either whole or partial) of this data
    sheet or any information it contains, is prohibited and
    subject to legal pursuit.

    PG:22

    2/2 Technical data sheet . Edition: 03.15-A www.sodamco-weber.com

    You might also like