Scribd Logo
Upload

Welcome to Scribd!

  • 28 views

    Electrode Booklet F Web 73

    Uploaded by

    satnam
    This document provides information on TENALLOY 75D-2 low alloy steel, which is used for high strength steel welding. It is a Mn-Ni-Mo type electrode that produces a weld deposit suitable for welding high tensile steels used in heavy structures and equipment. The electrode requires preheat, interpass, and post-weld heat treatment to achieve the desired high strength and toughness even at low temperatures of -50°C. It has applications in welding fully killed fine grained steel with minimum tensile strengths of 690 MPa.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Electrode Booklet F Web 73

    Uploaded by

    satnam
    28 views1 page
    This document provides information on TENALLOY 75D-2 low alloy steel, which is used for high strength steel welding. It is a Mn-Ni-Mo type electrode that produces a weld deposit suitable for welding high tensile steels used in heavy structures and equipment. The electrode requires preheat, interpass, and post-weld heat treatment to achieve the desired high strength and toughness even at low temperatures of -50°C. It has applications in welding fully killed fine grained steel with minimum tensile strengths of 690 MPa.

    Original Description:

    Electrode Booklet F Web 73

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information on TENALLOY 75D-2 low alloy steel, which is used for high strength steel welding. It is a Mn-Ni-Mo type electrode that produces a weld deposit suitable for welding high tensile steels used in heavy structures and equipment. The electrode requires preheat, interpass, and post-weld heat treatment to achieve the desired high strength and toughness even at low temperatures of -50°C. It has applications in welding fully killed fine grained steel with minimum tensile strengths of 690 MPa.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    28 views1 page

    Electrode Booklet F Web 73

    Uploaded by

    satnam
    This document provides information on TENALLOY 75D-2 low alloy steel, which is used for high strength steel welding. It is a Mn-Ni-Mo type electrode that produces a weld deposit suitable for welding high tensile steels used in heavy structures and equipment. The electrode requires preheat, interpass, and post-weld heat treatment to achieve the desired high strength and toughness even at low temperatures of -50°C. It has applications in welding fully killed fine grained steel with minimum tensile strengths of 690 MPa.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    TENALLOY 75D-2

    LOW ALLOY STEEL (High Strength)

    Low alloyed Mn-Ni-Mo type Electrode for high tensile steel Welding.
    CLASSIFICATION : EN 757 AWS A/SFA 5.5 APPROVALS :
    E 55 4 Z B 32 H5 E 10018-D2 ABS

    KEY FEATURES :
    • Basic type electrode • Suitable preheat, interpass and PWHT is
    • Mn-Ni-Mo type weld deposit necessary to achieve desired properties
    • High resistance to cracking and cold toughness • Radiographic weld deposit
    at temperatures as low as -50°C • Positional welding capability

    WELDING POSITION : AC (70 OCV)/DCEP

    TYPICAL APPLICATIONS :

    • Welding of fully killed fine grained high tensile • Heavy structures under restraint
    steels used for fabrication of penstock, earthmoving • Used for materials with minimum tensile
    equipments strength of 690 MPa

    REDRYING CONDITION : 250-300OC for minimum 1 hr. (Also available in vacuum packed condition)

    CHEMICAL COMPOSITION OF UNDILUTED WELD METAL, Wt % :


    C Mn Si Ni Mo S P
    Typical 0.08 1.8 0.5 0.6 0.4 0.02 0.02
    Specification 0.15 max 1.65-2.0 0.20-0.60 0.90 max 0.25-0.45 0.03 max 0.03 max

    MECHANICAL PROPERTIES OF ALL WELD METAL :


    YS at 0.2% CVN Impact
    Condition UTS, MPa EL%
    offset, MPa at - 50°C, J

    Typical PWHT: 725 640 19 56


    O
    620 C for 1 Hr
    Specification 690-790 600-700 16-24 40 avg.
    Diffusible H2 Content: <5 ml/100 gm

    PARAMETERS - PACKING DATA :


    Approx. Approx. wt. of 1000
    Ø x L, mm Amperage, A Carton/Box
    Pcs/Carton pcs, Kg.
    2.5 x 350 60-90 242 4 21
    3.15 x 450 100-140 112 4 44
    4.0 x 450 140-180 74 4 67
    5.0 x 450 190-250 49 4 100

    PASSION FOR WELDING SINCE 1951 www.adorwelding.com

    73

    You might also like