60W Triple Output Switching Power Supply: Series
60W Triple Output Switching Power Supply: Series
60W Triple Output Switching Power Supply: Series
Features :
Universal AC input / Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
Fixed switching frequency at 50KHz
2 years warranty
SPECIFICATION
MODEL T-60A T-60B T-60C
OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 CH3
DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V
RATED CURRENT 5A 2.5A 0.5A 5A 2.5A 0.5A 5A 2A 0.5A
CURRENT RANGE 0.5 ~ 7A 0.2 ~ 3.5A 0 ~ 1A 0.5 ~ 7A 0.2 ~ 3.5A 0 ~ 1A 0.5 ~ 7A 0.2 ~ 3A 0 ~ 1A
RATED POWER 57.5W 61W 62.5W
RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p
OUTPUT
VOLTAGE ADJ. RANGE CH1 : 4.75 ~ 5.5V CH1 : 4.75 ~ 5.5V CH1 : 4.75 ~ 5.5V
VOLTAGE TOLERANCE Note.3 2.0% 6.0% 6.0% 2.0% 6.0% 6.0% 2.0% 6.0% 6.0%
LINE REGULATION 0.5% 1.0% 0.5% 0.5% 1.0% 0.5% 0.5% 1.0% 0.5%
LOAD REGULATION 1.0% 4.0% 1.0% 1.0% 4.0% 1.0% 1.0% 4.0% 1.0%
SETUP, RISE TIME 300ms, 50ms/230VAC 800ms, 50ms/115VAC at full load
HOLD UP TIME (Typ.) 80ms/230VAC 10ms/115VAC at full load
VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY(Typ.) 72% 72% 72%
INPUT
AC CURRENT (Typ.) 2A/115VAC 1A/230VAC
INRUSH CURRENT (Typ.) COLD START 20A/115VAC 40A/230VAC
LEAKAGE CURRENT <3.5mA / 240VAC
105 ~ 150% rated output power
OVERLOAD Protection type : Hiccup mode, recovers automatically after fault condition is removed
PROTECTION
5V: 5.75 ~ 6.75V
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed
WORKING TEMP. -10 ~ +60 (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT 0.03%/ (0 ~ 50 )on +5V output
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS UL1012, UL60950-1, TUV EN60950-1 approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
(Note 4)
HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A
MTBF 281.1K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION 159*97*38mm (L*W*H)
PACKING 0.55Kg; 24pcs/14.1Kg/0.75CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
(as available on http://www.meanwell.com)
152.5
7
3.5
1
2
9.5
65
84.5
97
8.2
5
3
6 2-M
3.5
4.5
24 78
159
6.5 150
9
18.5
3-
3.5
38
18
M3
28.5
RECTIFIERS
Block Diagram & REGULATOR -V fosc : 50KHz
FILTER
RECTIFIERS
& +V2
FILTER
FG DETECTION
PWM CIRCUIT
O.L.P. CONTROL
O.V.P.
Ta=25
13 5.2 +12V 300
100 +5V
OUTPUT RIPPLE (mVp-p)
12 5.0 250
OUTPUT VOLTAGE (V)
80 -12V
11 4.8 200
60 10 4.6 150
LOAD (%)
9 4.4 100
40
8 4.2 50
+12V
20 +5V
7 4.0 25
-12V
-10 0 10 20 30 40 50 60 (VERTICAL) 60 80 100 120 140 160 180 200 220 240 260
-10 0 45 55 (HORIZONTAL)
Authorized Distributor
Mean Well:
T-60B T-60A T-60C