www.infoPLC.

net

Technology

PROFIBUS Technology

Chips - Modules - Development Kits

s Technology
Date 10/17/00, Page 1
 www.infoPLC.net

Technology

‰ Application Specific Integrated Circuit - ASIC

Master ASPC2

DPC31

Intelligent Slave SPC3 12 Mbaud

SPC41
+ SIM 11 31.25 kbaud
RS 485 IEC 1158-2

LSPM2 SPM2
Simple Slave

s Technology
Date 10/17/00, Page 2
 www.infoPLC.net

Technology

‰ Simple Field Devices

LSPM2 SPM2

MQFB, 80 Pin, 2cm2 PQFB, 120 Pin, 10cm2

9 Transmission rate up to 12Mbaud

9 DP Protocol completely integrated
9 No processor required
9 Data Volume:
8 LSPM 2 - 32 bit I/O & 8 bit diagnostic
8 SPM 2 - 64 bit I/O & 16 bit diagnostic
s Technology
Date 10/17/00, Page 3
 www.infoPLC.net

Technology

‰ LSPM2 Block Diagram

48 MHz

Clock pulse M TxD

generator i RS 485 Interface
RxD
c
Interface for r
o I/O
Port A
ser. EEPROM s
shift register e I/O /Diag
Port B
q
I/O Inter- u I/O /Diag
Port C
face e
n
Port D I/O /Diag
c
NORMOPER e
Port E Diagnostics
DIAERROR r

Watchdog Baudrate Generator

80 PIN QFP-Housing
XSREE
32 I/O´s

s Technology
Date 10/17/00, Page 4
 www.infoPLC.net

Technology

‰ Features LSPM2/SPM2
; Timer for response monitoring integrated (watchdog)
; Automatic detection of transmission rate
; EEPROM interface for station address & Ident
Number
; Shift register interface
; I/O interface
; Parameterization ports
; Diagnostic data is specified
; LSPM2/ SPM2 supports all mandatory and optional
services for field device/slave solutions

s Technology
Date 10/17/00, Page 5
 www.infoPLC.net

Technology

‰ Intelligent ASICs
ASPC2 SPC 3 SPC 41 DPC 31
Application Application Application
Application Slave Slave
Master Slave
DPV1
PROFIB. PROFIBUS PROFIBUS
DP FMS PROFIBUS DP PROFIB. FMS
DP PROFIBUS DP
Layer 2
PROFIBUS Part 1 PROFIBUS Part 1
PROFIBUS Part 1 PROFIBUS Part 1 + Data-Link-Layer IS + Data-Link-Layer IS
+ Physical-Layer Synchronous + Physical-Layer Synchronous

PROFIBUS

RS 485 (max. 12Mbaud)

Hardware SIM 11 SIM 11

Software
PROFIBUS (intrinsic safety)
IEC 1158-2 (31.25kbaud)

s Technology
Date 10/17/00, Page 6
 www.infoPLC.net

Technology

‰ Intelligent ASICs - continued

SPC3 SPC41 DPC31 ASPC2

Max. Transmission 12 12 12 12
Rate [Mbaud]

Transm. Medium RS 485 RS485 / IEC 1158-2 (with SIM 11) RS 485

Protocol DP (DPV1) DP/FMS/PA DP/DPV1 DP/DPV1/FMS

Message Buffer 1.5 1.5 6 1,000
[kByte] external

Housing PQFP, 44 Pin PQFP, 44 Pin PQFP, 100 Pin MQFP, 100 Pin

s Technology
Date 10/17/00, Page 7
 www.infoPLC.net

Technology

‰ Intelligent … (continued) - SPC3

up to 244 byte automatic search
9.6kbd-12Mbd
of data of baudrate

3 buffers for each: DP slave

input & output protocol integrated
SPC3
data; 1 for PRM;
2 for CFG & DIAG
interface to:
Intel (8032, 80x86)
Motorola (HC11/16/916)
firmware available 1.5 kByte
Siemens (80166/80167)
internal RAM
s Technology
Date 10/17/00, Page 8
 www.infoPLC.net

Technology

‰ Intelligent … (continued) - DPC31

up to 244 byte automatic search
9.6kbd-12Mbd
of data of baudrate

3 buffers for each: DP slave

input & output protocol integrated
DPC31
data; 2 for PRM,
CFG & DIAG
interface to:
Intel (8032, 80x86)
Motorola (HC11/16/916)
firmware available
Siemens (C166)
s Technology
Date 10/17/00, Page 9
 www.infoPLC.net

Technology

‰ Intelligent … - DPC31 (continued)

31.25kBd
firmware includes
integrated synchronous
complete DPV1
8031 core

synchronous
serial interface
100 pin PQFP
housing up to 40
bits I/O

standard interface
6 kByte
for memory expansion
internal RAM

s Technology
Date 10/17/00, Page 10
 www.infoPLC.net

Technology

‰ Available Firmware for the ASICs

Master SW
ASPC2 + Protocol DP (80 kByte)
for 80165

Slave SW
SPC3 + Protocol DP (6 kByte)

Slave SW
DPC31 + Protocol DP/DPV1 (depends on
implementation)

SPC41 Slave SW
+ Protocol DP, (30 kByte)
FMS,PA
s Technology
Date 10/17/00, Page 11
 www.infoPLC.net

Technology

‰ Modules
9 Fast implementation of PROFIBUS
9 Requires no SMD technology by the device
manufacturer
9 Reduces development effort
9 Low cost solution for getting started
9 PROFIBUS part is already complete
9 Proven technique

s Technology
Date 10/17/00, Page 12
 www.infoPLC.net

Technology

‰ Modules (continued) - Features

IM 180 IM 181
Master module
Carrier
IM 183-1 board
ASPC2
Intelligent Slave module for
ISA
SPC3
IM 184
Simple Slave module

LSPM2

; 5V DC power supply
; 0 to 70 °C permissible ambient temperature
; Transmission rate up to 12Mbaud

s Technology
Date 10/17/00, Page 13
 www.infoPLC.net

Technology
IM 184
‰ Modules (continued) - IM 184 Simple Slave module

9 PROFIBUS protocol handling by LSPM 2 ASIC LSPM2

9 32 configurable inputs/outputs
9 8 separate diagnostics inputs
9 Connection: 2x34-pin connectors for connection to
host network
9 10-pin connector for RS-485
9 Floating RS-485 interface for PROFIBUS-DP
9 Power consumption typ. 100 mA
9 Dimensions (W x H): 85 x 64 mm / 3.3 x 2.5 in
(modular design)

s Technology
Date 10/17/00, Page 14
 www.infoPLC.net

Technology

‰ Modules (continued) - IM 183-1 IM 183-1

Intelligent Slave module

9 PROFIBUS protocol handling by SPC 3 ASIC SPC3

9 CPU 80C32 microprocessor with 20 MHz clock

frequency
9 32 kBytes SRAM user memory
9 32 kBytes (mirrored) or 64 kByte EPROM
9 50-pin connector for connection to host network
9 14-pin connector for RS-232 & 10-pin connector for
RS-485
9 Dimensions (W x H): 86 x 76 mm / 3.3 x 2.7 in

s Technology
Date 10/17/00, Page 15
 www.infoPLC.net

Technology

‰ Modules (continued) - Example Program IM 183-1

Intelligent Slave module
IM 183-1 and SPC3
SPC3
if(DPS2_GET_IND_NEW_PRM_DATA())
{ /*=== New parameter data ===*/
UBYTE SPC3_PTR_ATTR * prm_ptr;
UBYTE param_data_len, prm_result;
UBYTE ii;
prm_result = DPS2_PRM_FINISHED; User makes changes to adjust
do { /* Check parameter until no conflict behavior */ code to own application
prm_ptr = DPS2_GET_PRM_BUF_PTR();
param_data_len = DPS2_GET_PRM_LEN();
/* data_length_netto of parametration_telegram > 7 */
if (param_data_len > 7)
{
if (( *(prm_ptr+8) == 0xAA) && ( *(prm_ptr+9) == 0xAA))
prm_result = DPS2_SET_PRM_DATA_NOT_OK(); /* as example !!! */
else
{
for (ii= 0; ii<param_data_len & ii <10; ii++) // store in the buffer
prm_tst_buf[ii] = *(prm_ptr+ii+7);
prm_result = DPS2_SET_PRM_DATA_OK();
}
}
else
prm_result = DPS2_SET_PRM_DATA_OK();
} while(prm_result == DPS2_PRM_CONFLICT);

s Technology
Date 10/17/00, Page 16
 www.infoPLC.net

Technology

‰ Modules (continued) - IM 180

IM 180 IM 181
Master module
9 PROFIBUS protocol handling by ASPC 2 ASIC Carrier
board
ASPC2
for
9 80C165 microprocessor with 40 MHz clock ISA
frequency
9 2 x 128K x 8-bit RAM user memory
9 128K x 16-bit flash EPROM program & parameter
memory
9 48 MHz oscillator chip for ASPC 2
9 16/8-bit data bus can be connected; dual-port RAM
(8K x 16 bit); 64-pin connector (4 rows); optional
8/16-bit data bus connectable
9 Dimensions (W x H): 100 x 100 mm
s Technology
Date 10/17/00, Page 17
 www.infoPLC.net

Technology

‰ Development Kit
9 Complete package with hardware & software
9 “Plug & Play” - plug hardware into PC connect power
to the slave board and get started
9 Starting point for own development
9 Hardware (slave) can be used as base for own
development
9 Software (example program) for slave can also be
used as base for development of own application

s Technology
Date 10/17/00, Page 18
 www.infoPLC.net

Technology

‰ Development Kit DP & PA - Test Board

s Technology
Date 10/17/00, Page 19
 www.infoPLC.net

Technology

‰ Development Kit DP & PA - RS485, FO or PA

s Technology
Date 10/17/00, Page 20
 www.infoPLC.net

Technology

‰ Development… - RS485 (1), FO (2) or PA (3)

(continued) (3)

(2) PA Link &

CP 5613 OBT PA Coupler
(1)
FO Cable

s Technology
Date 10/17/00, Page 21
 www.infoPLC.net

Technology

‰ Development Kit DP & PA - What do you get?

; PROFIBUS DP Master CP 5613 (PCI format)
; Software SIMATIC NET for CP 5613, configuration
tool COM PROFIBUS and demo version of Process
Data Manager (PDM)
; Example program for the PC (including DP Extended
services)
; Test board with DPC31 ASIC
; Firmware V1SL for DPC31
; Example program for board including DP Extensions
; Optical Bus Terminal (OBT), cable & connectors

s Technology
Date 10/17/00, Page 22
 www.infoPLC.net

Technology

‰ Development Kit 4 - What do you get?

; PROFIBUS DP Master IM 180 with carrier board IM
181 (ISA format)
; DPMT firmware for IM 180
; Configuration tool COM PROFIBUS and example
program for the PC
; Test board IM 183-1 with SPC3 ASIC
; Firmware DPS2 for SPC3
; Example program for board
; Test board IM 184 with LSPM2 ASIC
; Cable & connectors

s Technology
Date 10/17/00, Page 23
 www.infoPLC.net

Technology

‰ List Prices [US$/piece]

; LSPM2 19.40 (quantity 5) 14.45 (quantity 330)
; SPM2 27.40 (quantity 5) 18.70 (quantity 100)
; SPC3 15.20 (quantity 5) 11.51 (quantity 576)
; Firmware DPS2 for SPC3 1,380.00 US$ (one time fee)
; Firmware DPSE for SPC3 2,410.00 US$ (one time fee)
; SPC41 20.60 (quantity 5) 13.72 (quantity 960)
; DPC31 19.40 (quantity 5) 15.17 (quantity 300)
; Firmware V1SL for DPC31 2,800.00 US$ (one time fee)
; SIM11 18.00 (quantity 5) 11.74 (quantity 1,000)
; ASPC2 36.20 (quantity 5) 27.27 (quantity 660)

…contact (423) 262-2576 for more information or (423) 262-2425 to order

s Technology
Date 10/17/00, Page 24
 www.infoPLC.net

Technology

‰ List Prices [US$] (continued)

; Development Kit DP & PA 3,100.00

; Master board IM 180 675.00
; Carrier board IM 181 290.00
; Slave board IM 183-1 260.00
; Slave board IM 184 230.00
; Development Kit 4 2,700.00

…contact (423) 262-2576 for more information or (423) 262-2425 to order

s Technology
Date 10/17/00, Page 25