TIG ShadowProjector en US

TIG-shadowProjector
Copyright 2015 TIG (c)
All rights reserved.
This software is provided as is and without any express or implied warranties,

including, without limitation, the implied warranties of merchantability and
fitness for a particular purpose.
Extension:
By default the Extension TIG-shadowProjector is set to be
active when it is first installed, but it may be switched on/off later
as desired.
Menu:
Tools > ShadowProjector > submenu items
New Shadow Projection

1. Select the Face[s] to be processed.
Note that all other Objects in the Selection are ignored.
2. Run the tool from the submenu item.
3. The Options dialog opens.

Choose the Shadow 'Type' from the drop-down list.
Lines
Faces
Faces[Edged]
Faces[Edged]%
Faces[Edged]%sq…
'Lines' draws just lines along each shadow's perimeter
[the default Type].
'Faces' draws shadows as 'gray' faces, with edges hidden/visible.
'Faces[Edged]' draws shadows as 'gray' faces, edges visible.
'Faces[Edged]%' draws each shadow as a 'gray' face,

edges visible, with a text-tag at the center of the 'Shadow' group
showing the % of that Face in shade.
'Faces[Edged]%sq…' is similar, but it also appends the

Shaded:Total Area,
in either ft² or m² depending on your Model Units settings.
In this Options dialog you can also enter a 'Text Height', in

current units.
Note that this is only used if a '%' Type is chosen.
The default text-height is 2" or 50mm depending on your Model
Units settings.
These Options are remembered with the Model across sessions.
4. OK to continue, Cancel to abort.
Notes:
Selected Faces that are oriented away from the sun are ignored.
All qualifying Faces are now processed in turn.
All Faces are analyzed for shading, so it is much quicker to Select
only those Faces you know to be shaded [or just those which you
are interesting in].
Remember that an unshaded Face will take time to analyze and
produce no 'Shadow' !
'Shadows' are drawn over the Face showing the extent on any
shadows cast on it by all other Faces in the Model [including any
within Groups/Components] located between it and the sun.
Note that a Surface's 'Shadows' are processed as separate facets,
so it is much quicker to have hidden geometry 'on' and then Select
only those Surface Faces which you know to be shaded...
All Faces within the Model that fall within a face's reversed-umbra
will be included in any shadow-casting analysis.
Hidden Objects, those on 'off' Layers, Faces with transparent-
materials [<70% opacity] - or faces assigned the default-material
within a group/instance that itself has a transparent-material [so it
displays 'transparent' and casts no shadow] - and Objects with
'casts shadows' unchecked are ignored in the analysis.
Each 'Shadow-Group' is named after the Model's ShadowTime and
the Face's ID:
e.g. Shadows@Jun_21_1200#0xc741eac
Those with % or %sq have the text-group similarly named, but
with those values appended to the name:
e.g. Shadows@Jun_21_15=67.1%
The 'Shadow-Groups' are put on a Layer named 'SHAD'.
The 'Shadows' 'gray' material is named 'Shadows'; once it has
been made you can change its color/transparency etc as desired.
Any text is colored 'Black'.
Later on the text-group can be moved within the shadow-group
for clarity etc.
The text-group goes on a Layer named 'SHAD-TEXT'.
The tool beeps when it has finished processing.
The processing/shadow-group is one step undoable.
Note that if the 'Shadows' have Faces then it is moved 0.1mm off
the original Face to avoid 'z-fighting' between surfaces.
Similarly any text-group is slightly offset upwards too to be above
the Faces.
It is best to process a few faces at a time because Sketchup slows
up almost 'exponentially' as it processes larger collections...
If you process a lot at once be prepared to have lunch and come
back when it has done !
Remember that although it might 'white-out', it is still processing.
It is recommended that you keep the Outliner window closed
when using this tool, although it can be useful for selecting
shadow/text-groups later on.
Shadow Report to File
Writes a report of all Shadows to a txt file.
Shadow Report in Ruby Console

Prints the report in the Ruby Console.
Shadow Options for Model

Opens the Options dialog - this lets you change the settings for
that Model without having to run an analysis.
The Options are saved with the Model across sessions.
Help...
Opens the Help document.
Locales:
You can make your own locale translations of the tool's .strings
file as your own locale copy.
There are detailed instructions at the start of the standard file:
..Plugins/TIG-shadowProjector/Strings/TIG-shadowProjector-EN-US.strings
You can also make a translated copy of the Help .doc file:
..Plugins/TIG-shadowProjectorStrings/TIG-shadowProjector-EN-US.doc

TIG ShadowProjector en US

Uploaded by

Copyright:

Available Formats

TIG ShadowProjector en US

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TIG ShadowProjector en US

Uploaded by

Copyright:

Available Formats

TIG-shadowProjector

Copyright 2015 TIG (c)

All rights reserved.

This software is provided as is and without any express or implied warranties,

New Shadow Projection

2. Run the tool from the submenu item.

3. The Options dialog opens.

'Faces' draws shadows as 'gray' faces, with edges hidden/visible.

'Faces[Edged]' draws shadows as 'gray' faces, edges visible.

'Faces[Edged]%' draws each shadow as a 'gray' face,

'Faces[Edged]%sq…' is similar, but it also appends the

In this Options dialog you can also enter a 'Text Height', in

These Options are remembered with the Model across sessions.

4. OK to continue, Cancel to abort.

Shadow Report in Ruby Console

Shadow Options for Model

There are detailed instructions at the start of the standard file:

You might also like