3900 Series & 5900 Series Base ST V100R015C10SPC080 GBTSFunction Performance Counter Reference
3900 Series & 5900 Series Base ST V100R015C10SPC080 GBTSFunction Performance Counter Reference
3900 Series & 5900 Series Base ST V100R015C10SPC080 GBTSFunction Performance Counter Reference
V100R015C10
GBTSFunction Performance
Counter Reference
Issue Draft C
Date 2019-04-10
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: [email protected]
This section describes performance counters for 3900 and 5900 series base stations.
Document Structure
Figure 1 shows the document structure.
Table 1 Terms
Term Explanation
Object type One object type contains one or more function subsets.
Counter A table that lists parent counters and their child counters in
Relationship a table. Note that the child counters listed in the table cover
only typical scenarios. That is, some scenarios are not
covered by any counter. Therefore, the value of a parent
counter is larger than or equal to the sum of the values of its
child counters. Some counters may not be involved in any
counter relationship.
NOTE
If the value of the parent counter exceeds the sum of the values of
the child counters, the value difference is the items that are not
counted.
Item Description
Original Release The version for which the counter was first available.
Contents
FunctionSubSets
FunctionSubSet FunctionSubSet Name
Overview
This function subset provides the measurements of total time, total range and average range of
GX dynamic power sharing. GX dynamic power sharing includes the GSM and UMTS
dynamic power sharing and the GSM and LTE dynamic power sharing.
Counters
Counter ID Counter Name Counter Introduced in
Description Version...
Counter Relationship
None
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
This counter provides the total time during which the GSM network shares power with the
target network in a measurement period.
Measurement Points
This counter is measured on the BTS side from when the GSM network sends a power
sharing message to the target network to when the GSM network takes back all the shared
power.
Formula
None
Unit
s
Related Features
Counter Name Feature ID Feature Name
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
This counter provides the total range of the GSM network in sharing power with the target
network in a measurement period. This counter corresponds to the Total shared power during
GX power sharing counter (TRX.GXPWRSHARE.SHARE.AMP) for BSCs.
Measurement Points
This counter is measured on the BTS side when the GSM network begins to share power with
the target network. The value of this counter is calculated using the following formula:
(x1) x (y1) + (x2) x (y2) + ... + (xN) x (yN)
where
x1, x2,..., and xN respectively represent the shared power during N time periods.
y1, y2,..., and yN represent N time periods during which the GSM network shares power with
the target network.
Formula
None
Unit
None
Related Features
Counter Name Feature ID Feature Name
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
This counter provides the average range of the GSM network in sharing power with the target
network in a measurement period.
The greater the value of this counter, the greater the total range of the GSM network in
sharing power with the target network. The smaller the value of this counter, the smaller the
total range of the GSM network in sharing power with the target network.
In GSM and UMTS dynamic power sharing mode, the target network is UMTS network. In
GSM and LTE dynamic power sharing mode, the target network is LTE network.
This counter corresponds to the Average shared power during GX power sharing counter
(TRX.GXPWRSHARE.SHARE.AVR.AMP) for BSCs.
Measurement Points
During a measurement period, the BTS regularly samples the value of the
VS.GXPowerShare.TotalShareRange counter. When the measurement period ends, the value
of this counter is calculated using the following formula:
VS.GXPowerShare.AverageShareRange = Accumulated value of sampled
VS.GXPowerShare.TotalShareRange/VS.GXPowerShare.TotalShareTime
Formula
10*log10(∑[VS.GXPowerShare.TotalShareRange]/∑[VS.GXPowerShare.TotalShareTime])
Unit
dBm
Related Features
Counter Name Feature ID Feature Name
FunctionSubSets
FunctionSubSet FunctionSubSet Name
Counters
Counter ID Counter Name Counter Introduced in
Description Version...
Counter Relationship
None
1.2.1.1 Number of Bytes Transmitted at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
This counter provides the total number of bytes transmitted over the Abis interface on both
the user plane and control plane in a measurement period. On the user plane, the number of
bytes transmitted before the multiplexing, fragmentation, or IPsec encryption are measured.
On the control plane, the number of bytes transmitted before the fragmentation or IPsec
encryption are measured.
Measurement Points
The number of bytes transmitted at the IP layer over the Abis interface is sampled every 10
seconds. At the end of a measurement period, the sum of these sampling results is used as the
value of this counter.
Formula
None
Unit
byte
Related Features
Counter Name Feature ID Feature Name
1.2.1.2 Number of Bytes Received at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
This counter provides the total number of bytes received over the Abis interface on both the
user plane and control plane in a measurement period. On the user plane, the number of bytes
received after the demultiplexing, reassembly, or IPsec decryption are measured. On the
control plane, the number of bytes received after the reassembly or IPsec decryption are
measured.
Measurement Points
The number of bytes received at the IP layer over the Abis interface is sampled every 10
seconds. At the end of a measurement period, the sum of these sampling results is used as the
value of this counter.
Formula
None
Unit
byte
Related Features
Counter Name Feature ID Feature Name
1.2.1.3 Number of IP Packets Transmitted at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
This counter provides the total number of packets transmitted over the Abis interface on both
the user plane and control plane in a measurement period. On the user plane, the number of
packets transmitted before the multiplexing, fragmentation, or IPsec encryption are measured.
On the control plane, the number of packets transmitted before the fragmentation or IPsec
encryption are measured.
Measurement Points
The number of packets transmitted at the IP layer over the Abis interface is sampled every 10
seconds. At the end of a measurement period, the sum of these sampling results is used as the
value of this counter.
Formula
None
Unit
packet
Related Features
Counter Name Feature ID Feature Name
1.2.1.4 Number of IP Packets Received at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
This counter provides the total number of packets received over the Abis interface on both the
user plane and control plane in a measurement period. On the user plane, the number of
packets received after the demultiplexing, reassembly, or IPsec decryption are measured. On
the control plane, the number of packets received after the reassembly or IPsec decryption are
measured.
Measurement Points
The number of packets received at the IP layer over the Abis interface is sampled every 10
seconds. At the end of a measurement period, the sum of these sampling results is used as the
value of this counter.
Formula
None
Unit
packet
Related Features
Counter Name Feature ID Feature Name
1.2.1.5 Maximum Transmit Rate at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
The transmit rate is sampled every 10 seconds (average transmit rate in the 10 seconds). This
counter provides the maximum value on both the user plane and control plane of these
sampling results in a measurement period. On the user plane, transmit rates before the
multiplexing, fragmentation, or IPsec encryption are measured. On the control plane, transmit
rates before the fragmentation or IPsec encryption are measured.
Measurement Points
The transmit rate over the Abis interface is sampled every 10 seconds. At the end of a
measurement period, the maximum value of these sampling results is used as the value of this
counter.
Formula
None
Unit
bit/s
Related Features
Counter Name Feature ID Feature Name
1.2.1.6 Average Transmit Rate at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
The transmit rate is sampled every 10 seconds (average transmit rate in the 10 seconds). This
counter provides the average value on both the user plane and control plane of these sampling
results in a measurement period. On the user plane, transmit rates before the multiplexing,
fragmentation, or IPsec encryption are measured. On the control plane, transmit rates before
the fragmentation or IPsec encryption are measured.
Measurement Points
The transmit rate over the Abis interface is sampled every 10 seconds. At the end of a
measurement period, the average value of these sampling results is used as the value of this
counter.
Formula
None
Unit
bit/s
Related Features
Counter Name Feature ID Feature Name
1.2.1.7 Maximum Receive Rate at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
The receive rate is sampled every 10 seconds (average receive rate in the 10 seconds). This
counter provides the maximum value on both the user plane and control plane of these
sampling results in a measurement period. On the user plane, receive rates after the
demultiplexing, reassembly, or IPsec decryption are measured. On the control plane, receive
rates after the reassembly or IPsec decryption are measured.
Measurement Points
The receive rate over the Abis interface is sampled every 10 seconds. At the end of a
measurement period, the maximum value of these sampling results is used as the value of this
counter.
Formula
None
Unit
bit/s
Related Features
Counter Name Feature ID Feature Name
1.2.1.8 Average Receive Rate at the IP Layer over the Abis Interface
Counters
Counter ID Counter Counter Network Applicable
Name Description Element Mode
Description
The receive rate is sampled every 10 seconds (average receive rate in the 10 seconds). This
counter provides the average value on both the user plane and control plane of these sampling
results in a measurement period. On the user plane, receive rates after the demultiplexing,
reassembly, or IPsec decryption are measured. On the control plane, receive rates after the
reassembly or IPsec decryption are measured.
Measurement Points
The receive rate over the Abis interface is sampled every 10 seconds. At the end of a
measurement period, the average value of these sampling results is used as the value of this
counter.
Formula
None
Unit
bit/s
Related Features
Counter Name Feature ID Feature Name