Rotary Actuator Catalogue-Reduced PDF

Focus on the technology of rotary
actuators(cylinders) for many years
A professional R&D manufacturer of

rotary actuators in China
To provide you with application

technology and solutions for rotary
actuators
简单的机构为您提供持久的力量
A simple mechanism provides you with enduring power
Integrity, Quality, Service and Competitiveness
They are always the goal of Dunke people

Founded in 2004, Shanghai Dunke Machinery Co.,

Ltd., which is located in the center of Fengcheng
Town, Fengxian District of Shanghai , is only 15
minutes' drive from Shanghai Lingang FTA for heavy
machinery. The company, with a site area of 22000
㎡ , a production area of 11000㎡ , a registered
capital of 5 million yuan and fixed assets more than
40 million yuan, has passed the ISO9001:2000
quality system certification as early as 2008. With
years of experience in hydraulic fluid industry, the
company can provide customers with complete sets
of hydraulic technology solutions. In 2012, the
company successfully developed the rotary
actuator and obtained a number of R&D patents,
which is well recognized by customers in practical
use.
1
Internal structure of products

Operational principle of the actuator: The linear piston movement is
converted to the rotary movement of rotating shaft by the internal two-
stage screw pair.
Main features
Compact structure
In order to ensure the compact structure of the actuator body for a larger
spiral angle, the piston stroke is thus greatly reduced.
High load capability
DKX series rotary actuator adopts the integral rolling bearings, no
additional external bearings are required for withstanding the thrust load,
radial load and bending moment load.
Zero leakage
Using robust PTFE, polyurethane and nitrile rubber seals, each product
will be tested separately for the sealing performance before shipment.
Through holes can be processed on the shaft according to
requirements
As the shaft is made of alloy steel,through holes can increase the stability
of the additional dynamic load, which can also be used as piston rods,
hydraulic hoses or cable channels.
Direct load mounting
In order to ensure the compact structure of the actuator body for a larger
spiral angle, the piston stroke is thus greatly reduced.
2
High load capability

The mounting flange and shaft is a whole, which avoids the gap
with the key connection; therefore, the same flange can also be
machined on the other side of the shaft.
Customized modules
Shafts, housings, pistons, thrust rings and some basic components
are in stock, for which some can be ordered according to customer's
requirements. Products made of stainless steel materials or with
special coating or heat treatment are also available for other harsh
environments.
Bounce
Aerial working platforms, cradles, rotating arms and other
equipment require small bounce. The bounce angle depends on the
machining accuracy. Due to seal wear caused by the bounce, our
products require that the bounce angle less than 0.5°.
Output torque
Due to the same size on both sides of the piston, the output torque
remains the same during clockwise or counterclockwise rotation of
actuator. As the bearing is subject to high thrust and friction, the
output torque is affected by the maximum bending moment to be
withstood by the actuator body.
3
Installation Force Diagrams of Each Series rotary actuators
Installation and Force Diagram of A Series

Note: A/E standard products can't withstand the radial
Radial bending bearing moment force (upon design demands, please
moment force contact our company when the output shaft center of
the actuator is subject to the radial bending moment)
Axial force
Torque
Installation Force Diagram of B/C/D Foundation Series
Axial force Axial force
Torque Torque
Radial bending
moment force
Radial load
Radial load
Radial bending
moment force
Torque
4
Rotation Angle and Mode Diagram of

Rotary Actuator
A B C D E F G
Application Diagram of Rotary Actuator
Processing master Crank drive Tube bending

tool change machine
Jumbo underground Feed mechanism

Valve control mechanical arm swinging
Door/cover Mobile platform

Material flipping
plate on/off
5
Balance valve
Since the rotary actuator is sometimes subject to the effects of load
and negative rotation torque during rotary movement of its drive workpieces
under some application conditions, balance loops are required. The rotary
actuator can run stably with low impact through back pressure of the balance
valve, thereby protecting the user's host and other equipment. Sometimes,
throttle valves are required to be in front series with the balance valve to
achieve better effects (for specific requirements, calculate the customer's
conditions, and please consult the Technical Department of Dunke Company
for details)
Integration Diagram
6
Selection description:
DKX - A 30 G Ⅱ Q 1 B V
1 12 3 4 5 6 7 8
Note:
1. The serial number of our company products is defined for use, installation and
conditions; for other requirements, please contact us directly.
2. The selection serial number only represents some product models of our
company; for special models, we shall make separate arrangements.
3. For the model representation details, see the serial dimension table in the
contents.
7
DKX-A Series Performance
8
DKX-A Series Dimensions
The product dimensions in the table is for reference only; the standard dimensions shall be subject to the final
product drawings.
Please consult Shanghai Dunke Machinery Co., Ltd. for details
9
DKX-B Series Performance
DKX-B 50 95 180 300 400 600 750 1100 1400

Torque
Drive 500 960 1850 3150 4290 5870 7620 11680 14130
210bar
（N.m）
Keep 730 1380 2670 4480 5700 8040 －－－
Standard 2800 4800 12000 18000 18000 18000 32000 42000 42000
Moment
（N.m）
Cantilever 1400 2800 5400 6500 6500 6500 9000 11000 11000
Axial 5000 6000 8000 12000 40000 40000 65000 80000 80000
Capacity
（N）
Radial 14000 20000 30000 40000 40000 40000 65000 80000 80000
Displace 180° 117 222 421 711 854 1270 －－－

ment
（cm3）
360° －－ 631 －－－ 2441 3743 5360
180° 12 19 32 45 47 50 －－－
Weight
（Kg）
360° －－ 40 －－－ 116 157 197
180° Standard Standard Standard Standard Standard Standard Standard Choice Choice
Valve
360° －－ Standard －－－－－－
10
DKX-B Series Dimensions
product drawings.
11
DKX-C Series Performance
DKX-C 20 50 80 120 300 400 650
Ancel Standard angle 180° 270° 180° 180° 270° 270° 270°
É Special angle 360° － 360É － 360É
Torque Drive 210 535 798 1203 2953 3938 6542

210bar
N.m Keep 320 820 1060 1850 4550 6000 10600
Moment Standard 1200 －－－－

N.m Cantilever 600 1200 2300 6900 26000 26000 40000
Capacity Axial 10000 13500 20000 40000 70000 70000 100000

N Radial 10000 13500 20000 40000 70000 70000 100000
Displacem 180° 45 75 140 289 494 554 1217

ent
cm3 360° 90 150 280 578 987 1108 2434
180° 8 15 33 －－
Weight
270É 13 － 78 78 132
Kg
360° 10 － 42 － 160
Balance valve Choice Choice Choice Choice Choice Choice Choice
Valve
Buffer valve Choice Choice Choice Choice Choice Choice Choice
12
DKX-C Series Dimensions
product drawings.
13
DKX-C Series Frent flange

Foot installation Performance
DKX-D
Front flange 200 300 500 800 1100 1800 2700
Foundation
Torque Drive 2030 2850 5100 7790 11500 18050 26750
210bar
（N.M） Keep 3200 5000 8100 12000 18500 45000 40000
Standard 14000 17500 31000 45000 75000 95000 70000

Moment
（ N.M ）
Cantilever 5500 7500 12000 20000 30000 45000 30000
Axial 14000 18000 30000 65000 70000 50000 150000

Capacity
（N ）
Radial 18000 25000 36000 65000 70000 70000 150000
Displacement 180° 461 716 1161 1722 2680 2280 3205

（ cm ³ ）
360° 921 1420 1313 3444 5360 8208 12145
180° 35 60 85 120 180 215 185

Weight
（ Kg ） 360° 45 75 110 170 240 －－
180° Cho ice Choi ce Choi ce Choi ce Cho ice Ch oice Sta ndard
Valve
360° Cho ice Choi ce Choi ce Choi ce Cho ice Ch oice Sta ndard
14
DKX-D Front Flange Installation Series
product drawings.
15
DKX-D Foundation Installation Series
DKX-D
Foundation Installation 200 300 500 800 1100 1800 2700
Series
φA 137 150 183 209 234 247 247
φB 149 177 202 227.5 265 296 275
C 38 44 50 57 60 62 50
180° 229 248 281 314 374 300 400
D
360° 358 395 454 516 604 －－
180° 267 292 323 383 431 411
E
360° 398 439 496 585 661 －－
180° 298 323 365 413 475 500 －
F
360° 427 470 538 615 705 －－
G 75 89 107 114 136 －－
H 80 95 108 122 140 175 150
φK 115 125 150 170 195 180 210
J 190 230 260 300 340 370 220
P 222 268 310 350 400 430 270
φL M12 M16 M20 M22 M24 M20 M20
PORTS G1/4 G1/4 G3/8 G3/8 G3/8 G3/8 G3/4
product drawings.
16
DKX-D Rear Flange Installation Series
DKX-D
Rear Flange Installation 550 850 1150 1450 1600 2000
Series
Torque Drive 5300 8300 11500 14500 16000 20000
210bar
（N.m ） Keep 8500 13100 18500 23000 25000 32000
Moment
Standard －－－－－－
（N.m ） Cantilever 12000 22000 35000 35000 50000 56000
Axial 30000 36000 80000 80000 80000 80000

Capacity
（N） Radial 36000 50000 100000 100000 100000 100000
Displace 180° －－－ 3256 3868 －
ment
（cm3） 360° 2491 3664 5170 6512 7736 9670
Weight
180° －－－ 230 －－
（Kg） 360° 110 150 235 － 345 430
180° －－－ Choice Choice Choice

Valve
360° Standard Standard Standard Choice Choice Choice
17
DKX-D Rear Flange Installation Series
DKX-D
Rear Flange Installation 550 850 1150 1450 1600 2000
Series
φA 227 253 296 296 342 342
φB 183 209 225 225 247 288
φC 200 215 265 265 303 303
φD 273 278 348 348 398 442
180° －－ 387 －
E
360° 430 456 500 559 572 672
F 31 51 40 40 40 40
180° －－ 460 －
G
360° 502 552 593 632 665 775
φH 150 170 185 185 205 240
φJ 245 250 310 310 352 380
N 12 12 16 16 12 12
φS 150 170 185 185 205 240
M 12 12 16 16 12 12
φR 17 17 17.5 17.5 25 28
Q G3/8 G3/8 G3/8 G3/8 G3/8 G3/8
product drawings.
18
Internal structure of DKX-E products
2. Zero leakage This series of

rotary actuator seals are imported
with original packaging, which are
dual-sealed for the key parts to
improve product stability!
1. Low-carbon alloy
materials This series
of rotary actuator
seals are imported 3. Compact structure
with original The high torque output
packaging, which are is available with the
dual-sealed for the two-stage screw pair in
key parts to improve the compact structure!
product stability 3
5. Flexible installation
4. Special surface The connecting flange of
hardening treatment With the swinging cylinder can
the new surface be adjusted with ±7.5°
hardening treatment, it is flexibly for installation
durable! and use
6. Special custom surface

bearing This series of rotary
actuator adopt the special
custom surface bearing,
making the life up to one
million times!
19
Notes
If you have questions about the selection, please
contact Dunke Machinery
We will first provide you with professional
technical support
The DKX-E series rotary actuator is made of low-
carbon alloy steel, which will not cause the
secondary pollution to the hydraulic oil of the
hydraulic system, thus effectively extending the
service life of hydraulic oil and components and
reducing the use cost.
DKX-E Rotary actuator Working type

H -Hydraulic return
Torque(N.M)@135bar S - Spring return
Flange
S-ISO5211
N-Others
Rotation
20
DKX-E**-*-H-*
DKX-E 125 250 500 1000 2000 4000 8000 16000 32000
Torque N.m
125 250 500 1000 2000 4000 8000 16000 32000
(135bar)
Weight(Kg) 10 15 18 32 77 115 150 205 324
A (mm) 12 15 20 20 25 28 30 30 35
B (mm) 15 15 20 20 25 28 30 30 35
C (mm) 90 90 125 130 155 175 195 200 250
F (mm) 35 40 47.5 50 63 80 85 95 110
H (mm) 60 65 75 85 90 105 115 125 145
L (mm) 164 180 210 225 260 295 330 350 420
Q (mm) 8 8 8 8 10 10 10 10 12
G (mm) 94 100 125 140 160 178 203 230 270
D1 (mm) 126 134 154 180 200 240 260 330 375
D2 (mm) 35 55 70 85 100 130 200 230 236
D3 (mm) 50 70 102 125 140 165 254 298 356
D4 (mm) 52 52 52 52 52 52 52 52 52
H1 (mm) 3 3 3 4 5 5 5 5 5
I (mm) 18 22 28 36 42 48 60 75 95
Ia (mm) 10.3 12.8 15.5 20.8 24.3 28.8 34.4 42.4 52.9
Ib (mm) 5 6 8 10 12 14 18 20 25
Ic (mm) 45 50 70 75 80 90 110 120 195
N (mm) 4 4 4 4 4 4 4 8 8
M (mm) M6 M8 M10 M12 M16 M20 M20 M16 M20
21
Table of Output Torque Parameters
N. M
Opening torque A
C Closing torque
Closing torque D B Opening torque
View refers to the output torque of the rotary

actuator at thenormal operating pressure of 135bar
The return stroke of the DKX-E series single-acting rotary actuator replies on the
spring return. The output torque of the series will be reduced accordingly at
135bar of the oil pressure. In addition, the closed torque of the rotary actuator
will be smaller gradually relative to this series as the time is longer due to the
fatigue effect of the return spring in the daily work. Therefore, regularly check
and replace the return spring!
Table of Output Torque Parameters
22
DKX-E**-*-S-* Series tech data
23
Notes
If you have questions about the selection, please
contact Dunke Machinery
We will first provide you with professional
technical support
The DKX-E series rotary actuator is made of low-
carbon alloy steel, which will not cause the
secondary pollution to the hydraulic oil of the
hydraulic system, thus effectively extending the
service life of hydraulic oil and components and
reducing the use cost.
DKX-I Electro-hydraulic Working type

actuator
H -Hydraulic return
Torque(N.M)@135bar S - Spring return
Protect
E -explosion
Rotation Manual pump
24
Series Standard
Processing
master tool
change
Nozzle swing of
the wet-spraying
trolley
Rig automatic
pole change Rig
mechanical arm
steering
25
Series Standard
Aerial working
trolley barrier
swing
Narrow-track
three-way
forklift steering
system
26
Series Standard
Sanitation
vehicle trash
turnover
mechanism
Joint swing of
industrial
mechanical arm
and underwater
operation arm
27
Series Standard
Jumbo power
frame swing
mechanism
Shield rig
rotating
mechanism
28
Series Standard
Hydraulic-electric
actuator
29
Company strength
30
321321
诚信质量服务竞争力
是盾克人永远追求的目标
SHANGHAI DUNKE MACHINERY CO.,LTD

Add:No.768 fengliang Road, fengcheng
Town,fengxian Area,shanghai,china
Tel:+86-21-65196182 65196187
Fax:+86-21-65196301
Mobile:+86-13817270266
www.coyo-sh.com
www.dunkesh.com
E-mail:[email protected]

Rotary Actuator Catalogue-Reduced PDF

Uploaded by

Copyright:

Available Formats

Rotary Actuator Catalogue-Reduced PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rotary Actuator Catalogue-Reduced PDF

Uploaded by

Copyright:

Available Formats

What is the company's area of expertise?

What is the company's area of expertise?

What are some of the main features of the rotary actuators?

What are some of the main features of the rotary actuators?

Focus on the technology of rotary

actuators(cylinders) for many years

A professional R&D manufacturer of

To provide you with application

Integrity, Quality, Service and Competitiveness

They are always the goal of Dunke people

Founded in 2004, Shanghai Dunke Machinery Co.,

Internal structure of products

High load capability

Installation Force Diagrams of Each Series rotary actuators

Installation and Force Diagram of A Series

Installation Force Diagram of B/C/D Foundation Series

Axial force Axial force

Rotation Angle and Mode Diagram of

Application Diagram of Rotary Actuator

Processing master Crank drive Tube bending

Jumbo underground Feed mechanism

Door/cover Mobile platform

DKX-A Series Performance

DKX-A Series Dimensions

DKX-B Series Performance

DKX-B 50 95 180 300 400 600 750 1100 1400

Displace 180° 117 222 421 711 854 1270 － － －

DKX-B Series Dimensions

DKX-C Series Performance

DKX-C 20 50 80 120 300 400 650

Torque Drive 210 535 798 1203 2953 3938 6542

Moment Standard 1200 － － － －

Capacity Axial 10000 13500 20000 40000 70000 70000 100000

Displacem 180° 45 75 140 289 494 554 1217

DKX-C Series Dimensions

DKX-C Series Frent flange

Standard 14000 17500 31000 45000 75000 95000 70000

Axial 14000 18000 30000 65000 70000 50000 150000

Displacement 180° 461 716 1161 1722 2680 2280 3205

180° 35 60 85 120 180 215 185

DKX-D Front Flange Installation Series

DKX-D Foundation Installation Series

DKX-D Rear Flange Installation Series

Axial 30000 36000 80000 80000 80000 80000

180° － － － Choice Choice Choice

DKX-D Rear Flange Installation Series

Internal structure of DKX-E products

2. Zero leakage This series of

6. Special custom surface

DKX-E Rotary actuator Working type

Table of Output Torque Parameters

Closing torque D B Opening torque

View refers to the output torque of the rotary

Table of Output Torque Parameters

DKX-E**-*-S-* Series tech data

DKX-I Electro-hydraulic Working type

Rotation Manual pump

SHANGHAI DUNKE MACHINERY CO.,LTD

You might also like

Displace 180° 117 222 421 711 854 1270 －－－

Moment Standard 1200 －－－－

180° －－－ Choice Choice Choice

DKX-E**--S- Series tech data