SOP-06 Washing

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 1

Nimr

Workshop SOP-006 – Equipment Washing PTW


Additional PPE Job Specific Toolbox Topics
Rubber boot, Eye protection, Hand protection, hard hat, Rain
suit may be required Slip and Trips will be the major hazards

Tools
Wash gun

# Step Details/Safety Concerns Photo


1. Bring vehicle or part to be washed in to washing area Ensure the vehicle is in service position
2. Shut off all the window and doors and set brake if
applicable
3. Turn on water supply to pressure washer
4. Pull out wand and amount of hose needed
5. Turn on power to washer and maintain a firm grip on the
wand
6. Keep wand pointed at vehicle or part being washed, do
not aim at others or yourself
7. When clean, shut off power first and then water
supply
8. Coil up hose and wand and put away
9.
10.
11.
12.

Review by: ASAATCO Revision: 05/2017 1 of 1

You might also like