Scribd Logo
Upload

Welcome to Scribd!

  • 40 views

    Department of Industrial and Production Engineering Jessore University of Science and Technology

    Uploaded by

    Sourav Roy
    1. The document is an exam for a course on Electrical Circuits and Electronics. It contains 8 questions covering various topics in the subject including Ohm's law, circuit analysis techniques like KVL, KCL, mesh analysis and supernodes. Other topics covered are network theorems, rectifiers, operational amplifiers, transistors and logic gates. 2. Students are required to answer any 6 out of the 8 questions. Each question has 3 parts with varying marks assigned. Questions involve calculations, derivations and explanations. 3. Diagrams of various electric circuits are provided with the questions to aid analysis and calculations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Department of Industrial and Production Engineering Jessore University of Science and Technology

    Uploaded by

    Sourav Roy
    40 views3 pages
    1. The document is an exam for a course on Electrical Circuits and Electronics. It contains 8 questions covering various topics in the subject including Ohm's law, circuit analysis techniques like KVL, KCL, mesh analysis and supernodes. Other topics covered are network theorems, rectifiers, operational amplifiers, transistors and logic gates. 2. Students are required to answer any 6 out of the 8 questions. Each question has 3 parts with varying marks assigned. Questions involve calculations, derivations and explanations. 3. Diagrams of various electric circuits are provided with the questions to aid analysis and calculations.

    Original Description:

    JUST IPE 2nd year 2nd Semester Final Question on Electrical Machine and Electronics

    Original Title

    IPE1201 Final

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document is an exam for a course on Electrical Circuits and Electronics. It contains 8 questions covering various topics in the subject including Ohm's law, circuit analysis techniques like KVL, KCL, mesh analysis and supernodes. Other topics covered are network theorems, rectifiers, operational amplifiers, transistors and logic gates. 2. Students are required to answer any 6 out of the 8 questions. Each question has 3 parts with varying marks assigned. Questions involve calculations, derivations and explanations. 3. Diagrams of various electric circuits are provided with the questions to aid analysis and calculations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    40 views3 pages

    Department of Industrial and Production Engineering Jessore University of Science and Technology

    Uploaded by

    Sourav Roy
    1. The document is an exam for a course on Electrical Circuits and Electronics. It contains 8 questions covering various topics in the subject including Ohm's law, circuit analysis techniques like KVL, KCL, mesh analysis and supernodes. Other topics covered are network theorems, rectifiers, operational amplifiers, transistors and logic gates. 2. Students are required to answer any 6 out of the 8 questions. Each question has 3 parts with varying marks assigned. Questions involve calculations, derivations and explanations. 3. Diagrams of various electric circuits are provided with the questions to aid analysis and calculations.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    Department of Industrial and Production Engineering

    Jessore University of Science and Technology


    1st Year 2nd Semester Examination-2018
    Course Title: Electrical Circuits and Electronics Time: 3 hours
    Course Code: EEE 1201 Full Marks: 72
    N.B. There are eight questions, answer any six questions.
    The figures shown in the margin indicate full marks.

    1. a) State and explain Ohm’s law with it's limitation. 2


    b) Find the number of branches and nodes in each of the circuits of figure 1(b). 3

    Figure 1(b)
    c) State KVL and KCL. Calculate I and Vab in the circuit of figure 1(c) 3

    Figure 1(c) Figure 1(d)


    d) Find the equivalent resistance Rab in the circuit of figure 1(d). 4

    2. a) R∆ 4
    For balanced Y and ∆ network, show that R Y = .
    3

    b) Using mesh analysis, find i0 in the bridge network shown in figure 2(b). 4

    Figure 2(b) Figure 2(c)


    c) Define supernode. From the RLC circuit in figure 2(c) find (i) i, vC and iL (ii) the energy 4
    stored in capacitor and inductor under dc condition.

    3. a) Prove that maximum power is transferred to the load when the load resistance and Thevenin 4
    resistance as seen from the load are equal. Also derive the maximum power transfer equation.

    Sourav Roy
    Asst. Professor, Dept. of EEE, JUST
    b) State superposition theorem. Find vx in the circuit of figure 3(b) by using superposition 4
    theorem.

    Figure 3(b) Figure 3(c)


    c) State Norton’s Theorem. Find the Norton equivalent circuit of the circuit in figure 3(c) at 4
    terminals a-b.

    4. a) What is a p-n junction? How do the depletion region width and contact potential across a p-n 4
    junction vary with the applied bias voltage?
    b) With a neat circuit diagram and waveforms explain the working of full wave bridge rectifier 4
    and calculate the efficiency as 81.2%.
    c) In the bridge type circuit shown in fig. 4(c), find (i) dc output voltage and (ii) peak inverse 4
    voltage. Assume primary to secondary turns to be 4.

    Fig. 4(c)

    5. a) Obtain the power factor and the apparent power of a load whose impedance is Z = 60 + j40 Ω 4
    when the applied voltage is 𝑣(𝑡) = 160 cos(377𝑡 + 10˚)V.
    b) Find the effective value of the waveform shown in figure 5(b). Also calculate the form factor 4
    of the signal.

    Figure 5(b)
    c) Calculate i0 in the circuit shown in figure 5(c). 4

    Figure 5(c)

    6. a) “Current through a pure inductor lags the voltage across it by 90˚ whereas current through a 3
    pure capacitor leads the voltage across it by 90˚”- Justify the statement.
    b) “A transistor works as an amplifier and inverter”, Justify this statement. 4
    Sourav Roy
    Asst. Professor, Dept. of EEE, JUST
    c) Compare between common base, common emitter and common collector configuration of 3
    transistor. How can you identify the leads of a transistor?
    d) Define current amplification factor (γ) and base current amplification factor (β). Show that, 2
    1
    𝛾=
    1−𝛼

    7. a) Write down some key points on op-amp. Derive the equation of voltage gain for non-inverting 4
    amplifier and integrator.
    b) What is faithful amplification? Explain the conditions to be fulfilled to achieve faithful 4
    amplification in a transistor amplifier.
    c) Compare voltage and power amplifier. With a neat circuit diagram, explain the working of a 4
    transformer-coupled class A power amplifier. How does it give excellent performance in
    impedance matching?

    8. a) You are given a number 153.6875 in decimal format. Convert the number in octal and proof 4
    by reconverting to decimal.
    b) Draw the AND, OR, NOT, NOR, NAND, EX-OR and EX-NOR logic gates. Also write down 4
    their truth table.
    c) Justify this statement, “A full-adder can be implemented with two half adders and an OR 4
    gate”.

    -------x-------

    Sourav Roy
    Asst. Professor, Dept. of EEE, JUST

    You might also like