Low Temperature Incubator (Energy Saving & Programmable) Ecological

Economical
Forced Air Convection
INE800
Operating Temp. distribution ±0.5°C Internal Inverter
0~+60°C (at 37°C during continuous operation) 286L Energy savings
temp. range accuracy capacity control

Upgraded inverter control improved refrigera-

tion efficiency, reduced frost significantly and
minimized wasted power during refrigeration.
44% power savings compared to previous models
Controller upgraded for easier viewing and operability
Temperature distribution accuracy improved for better incubation
Standard equipped with program operation, auto-stop, auto-start,
self-diagnostic, timer, calibration off-set, memory, and electricity &
CO2 emission monitor
Designed with analog output (4-20mA) and external communica-
tion port (RS485)

Specifications
Model INE800
System Forced air convection
Operating temperature range 0~+60oC
Setting temperature range -5~+65oC
Temperature adjustment
±0.2oC (at 37oC during continuous operation), ±0.5oC (at 37oC cycle operation)
accuracy
Temperature fluctuation ±0.3oC (at 37oC during continuous operation), ±1.0oC (at 37oC cycle operation)
Temperature distribution accuracy ±0.5oC (at 37oC during continuous operation)
Temperature gradient 2.0oC (at 37oC during continuous operation)
Max. temperature reaching time 20~60oC 35min.
Min. temperature reaching time 20~0oC 50min.
Cooling mechanism Continuous operation, Cycle operation, Cooling-stop operation
Interior material Stainless steel
Exterior material Chromate-free electrogalvanized steel plate Baked chemical resistant finish
Heat insulator Styrene foam (non-freon)
Freezer 200W Rotary Unit
Cooling medium R134a 350g
Operation range of freezer Below 40oC
Defrosting mechanism Hot gas bypass method, Manual (random) defrost / Auto (time) defrost
Blower fan DC Axial flow fan 4-Step, Equipped with error signal when stopped
Heater Iron-chrome wire heater : 750W

Sensor
preventation device)
Double sensor: Platinum resistance temperature detector: Pt100Ω (Temperature controller), K-thermocouple (Overheat

Cable port I.D.: 50 mm (Right side of main unit)

Temperature controller PID control by microprocesser
Temperature display Setting Temp. Display : 5-digit orange LED digital display, Actual Temp. Display : 4-digit green LED digital display
Timer / timer resolution 0~99hr. 59min. / 1min.
Operation function Fixed temperature, Auto start, Auto stop, Quick auto stop, Program (99 steps, 99 patterns)
Timer, Calibration off-set, Electricity & CO2 emission monitor, Voltage recovery optional, User setting saving/Readout,
Additional functions
Calendar timer (24 hours)
Self diagnostic function (Temp. sensor error, Heater disconnection, SSR short-circuit, Main relay error, Automatic overheat
Safety device prevention), Key lock, Overcurrent electric leakage breaker, Overheat preventation device, Fan malfunction detector, Cooling
high-pressure detector, Inverter malfunction detector
External dimensions W710×D645×H1730mm
Internal dimensions W600×D477×H1000 (effective 800) mm
Internal capacity 286L
Shelf load capacity 15 kg / pc.
Shelf rest step number / pitch 23 steps / 30mm
Power supply (50/60 Hz)
AC100V~240V

Weight Approx. 135kg

Included accessories Stainless steel punched metal 5 pcs. shelf / 10pcs. Brackets, 2 keys, Silicon stopper for cable hole 1 pc

159 Yamato Scientific Co., Ltd. INE800 http//www.yamato-scientific.com

 Power Consumption Comparison Falling / Rising Temp. Curve
Unit : Wh
0 oC 3oC 20oC 37oC
1200
70

IN804 648 712 864 1007

（A）
1000
60
Power consumption (W/h)

INE800 409 446 498 560

800 50

Reduction Rate 37% 37% 42% 44%

C)
Temperature (°
（B） 40
600

Comparison with IN804

（C）

1. Condition : AC115V/50Hz, Room Temp 23oC, 5 shelves, no load

30
400

2. Data was taken when each setting was stable

20
200

10

CO2 emissions reduced by approx 1,269 kg

0
0 5 10 15 20 25 30 35 40 45
0
Temperature (°
C)

(Calculated for 1 year operation with 37oC setting)

－10
0 10 20 30 40

9 Point Temperature Distribution

Time (min.)

Upper Front Upper Back Upper Front Upper Back Lower Front Lower Back Lower Front Lower Back (°C)
Center Side
Left Left Right Right Left Left Right Right
No load 37.1 36.2 37.2 36.9 36.8 36.8 37.1 36.9 37.0
Loaded 37.1 36.3 37.0 36.9 36.5 35.9 36.7 36.1 37.0

Condition
1. Above 9 measurement points were taken from the effective internal
capacity down-scale by 10% (as the image on the right)
2. Room Temp. 23oC, AC115V, 50Hz, Average temperature during stable
L3
10

setting temp. set at 37oC

3. No Load condition: 5 shelves
L3

4. Loaded condition: each of the 12 shelves were loaded with 20 Petri Dishes
(Total : 240 Petri Dishes )
L2
L3 10
10 L2
L2
10

L1
10 L1

Method Control Panel Overheat Prevention Device

L1 10

External Output Terminal (Top:

Bottom: standard)
optional
Cable Port (I.D.Φ50mm standard) Shelf & Bracket Set

Silicone sponge plug

Optional items
Description Product code
Dimensions (mm)
(1) Stainless steel punched metal shelf up to 15kg 211221
(2) Stainless steel wire shelf up to 20kg 212918
304

(3) External communication adapter 211880

744

(4) External alarm terminal 211881

(5) Time-up output terminal 211882
1730

(6) Earthquake resistant fixture 211883

* (4) and (5) please specify when ordering main unit
External communication adapter is equipped with RS485-USB interchange adapter, 1m USB cable, INE800
710 645

3m RS485 connection cable and utility software CD (Accepts Windows XP, Vista, 7 )

Yamato Scientific Co., Ltd. INE800 http//www.yamato-scientific.com 160