4-14 HD Line Boring Machine and Accessories Catalogue: Portable - Powerful - Flexible - Easy To Use

4-14 HD Line Boring Machine
And
Accessories Catalogue
Manual Hydraulic Bar Drive

Used with 5HP power unit
Proportional Hydraulic Bar Drive

Used with 10HP power unit
Portable - Powerful - Flexible - Easy to Use
Line Boring | Bore Welding | Inline Turning | Rotary Milling

1641-17th Ave. Campbell River BC Canada V9W 4L5 1
1-888-783-9675
4-14 HD Line Boring Machine
The York 4-14HD hydraulic line boring machine is built for more power.
Our new 3 guide bar design makes a more rigid machine allowing higher
metal removal rates with less chatter. With up to 351 ft. lbs. of torque at the
bar and a feed motor that delivers 30 ft. lbs. of torque, heavy cuts are made
easy. York has two options available to suit every users need, the manual
control machine with a 5hp hydraulic power unit and the proportional control
machine with a 10hp hydraulic power unit.
Hydraulic
Boring Bar Drives
 M—Manually Operated
 P—Pendant Operated (Proportional
Version)
 Maximum Bar Rotation Speeds of
90, 160, 280, and 460 RPM
3 Hydraulic Power supplies:

 5HP Single Phase, 5HP Three Phase,
 10HP Three Phase
10 HP Power supply
with pendant remote
 Boring diameters from 3 –24” (76—609mm)

 14” (355) cutting tool travel
 Up to 351 ft. lbs. (475.89 Nm) of torque at the boring bar
 Variable speeds up to 460 rpm
 Universal mount for line boring and bore welding—allowing you to set up ahead
while you work. Works with all 4-14 options
 Machine weight 72lbs. Bar drive weight 12lbs.
 Factory trained dealer representatives provide demo's and training for line boring
and bore welding machines.
 5HP single phase available in 220/230V 50 or 60 Hz
 5HP / 10HP three phase available in 230, 380, 460 or 575V 50 or 60 Hz
Portable - Powerful - Flexible - Easy to Use
Line Boring | Bore Welding | Inline Turning | Rotary Milling 2

1641-17th Ave. Campbell River BC Canada V9W 4L5
1-888-783-9675
4-14 HD M
4-14 HD Manually Operated Bar Drive
 Boring diameters from 3—24” (76-609mm)

 14” (355mm) cutting tool travel
 Up to 351 ft. lbs. (475.89Nm) of torque at the
boring bar
 Available maximum speeds of 90, 160, 280,
and 490rpm
 Works with all York 4-14 options
 Borewelder interface
Part Number: 4-14HD-M
4-14 HD P
4-14 HD Proportional ( Pendant Operated)
 Remote Pendant allows for convenient control

of rotation speed.
 Boring diameters from 3—24” (76-609mm)
 14” (355mm) cutting tool travel
 Up to 351 ft. lbs. (475.89Nm) of torque at the
boring bar
 Available maximum speeds of 90, 160, 280,
and 490rpm
 Works with all York 4-14 options
 Borewelder interface
Part Number: 4-14HD-P

1-888-783-9675
5 HP Hydraulic Power Units
Available Units:
Features:
 5 HP single or three phase electric
 Reversible hydrostatic drive
Three Phase
Hydraulic Power Units
190 Volt, 50 Hz Part Number: HPU-05-319050
220~240 Volt, 50Hz Part Number: HPU-05-322050
440~460 Volt, 50 Hz Part Number: HPU-05-344050
440~460 Volt, 60 Hz Part Number: HPU-05-346060
Single Phase
Available Units:
Manual Control Bar Drives:

 Variable Rotational Bar Drive Motors Available
 90 rpm, 183.5 ft lb Torque (249 Nm) Part Number: HBD-M-000-90
 460 rpm, 56 ft lb Torque (76 Nm) Part Number: HBD-M-000-460
 Bar rotation lock valve mounted on bar drive
 9 gallon (40.3Lt) fluid tank
 Bar drive weight 26 lbs (12kg)
 Power supply weight 275 lbs (125kg)

1-888-783-9675
10 HP Hydraulic Power Units
Features:
 10HP three phase electric
 Reversible hydrostatic drive
Available Units:
10HP Three Phase

Hydraulic Power Unit with Remote Pendant
Proportional Bar Drives:

 Variable Rotational Bar Drive Motors Available
 90 rpm, 183.5 ft lb Torque (249 Nm) Part Number: HBD-P-000-90
 460 rpm, 56 ft lb Torque (76 Nm) Part Number: HBD-P-000-460
 Bar rotation lock valve mounted on bar drive
 19 us gallons ( 72 Lt) fluid tank
 Bar drive weight 26 lbs (12kg)
 Power supply weight 570 lbs ( 258 kg)

1-888-783-9675
A) Premium Plus Package: 1.5 to 16”
(38 to 406mm) A B C D E Package Includes
Complete 5 bar package that covers the entire
1 1/4" Bar Package
operating range of the 4-14. This is a very
1 1 1 4 Foot Bar
dynamic package designed for those who work
1 1 1 1 6 Foot Bar
on a wide range of large and small bores. 2 2 2 2 3" Line-up Cones
Part Number: P-1 2 2 1 2 Mounting Head
2 2 1 2 Bore weld Interface
B) Premium Package: 1.5 to 10" (38 to 2 2 2 2 Tail Support
254mm) 2 2 2 2 Clamping Collars
Complete 5 bar package that is designed for 1 1 1 1 Calibration Tool
those in the heavy equipment industry that work 1 1 1 1 Accessories Tool Box
on bores up to 10 inches, this kit can be easily 2" Bar Package
upgraded at any time to 16” (406mm) 1 1 1 3 Foot Bar
diameters. 1 1 1 1 5 Foot Bar
1 1 1 7 Foot Bar
Part Number: P-2
2 2 2 2 2-4 " Line-up Cones
2 2 2 2 4-6" Line-up Cones
C) Standard Package: 2.5 to 6” (63.5 to 2 2 6-8" Line-up Cones
152mm) 2 8-10" Line-up Cones
3 bar package using our 2” (52mm) boring bars. 1 8-16" Line-up Spiders
Small bars can be added at any time if required. 2 2 2 1 Mounting Head
Part Number: P-3 2 2 2 1 Bore welder Interface
1 Adjustable X/Y Mounting Kit
D) Combo Package: 1.5 to 6" (38 to 2 2 2 2 Tail Support
152mm) 2 2 2 2 Clamping Collars
1 1 1 1 Calibration Tool
Kit is designed to meet the needs of most
equipment owners. This kit is upgradeable by 1 1 6-10" Big Bore Adaptor
adding components as needed. 1 10-13" Big Bore Adaptor
Part Number:P-4 1 13-16" Big Bore Adaptor
1 1 1 1 Accessories Tool Box
E) Small Bore Package: 1.5 to 3" (38 to 2 ¼” (58mm) Bars now available using our
76mm) Hydraulic drives – bore up to 24”(609mm)
2 bar package is designed for our 1-1/4”
(32mm) bars for small diameters, we have an Chrome Plated Bars Available as
upgrade kit that can be added to reach an Option
5” (127mm) using our 1 1/4” (32mm) bars.
Part Number: P-5
Custom packaging is also available. All our

bars can be supplied with either imperial or
metric tool ports.

1-888-783-9675
2" (50.8mm) Boring Bars & Accessories
2” (50.8mm) Mounting Head
 Two bearings for added support

 One bore welder mounting plate included
 Alignment adjusting screws
Part Number: 414-201
Replacement Inserts
Part Number: 414-201A
2" (50.8mm) Tail Support
 4 bolt flange bearings on replaceable

mounting plates
Replacement Weld Plate

Replacement Flange Bearing
Part Number: 414-202B
X/Y Adjustable Mounting Kit
 Freedom to move - the X/Y mounting

head allows you to move the bar
5/8" (15.8mm) in any direction from
center. You also have a 6 degree spher-
ical adjustment. This feature is a huge as-
set for bores larger than 10" (254mm)
that might require an extra degree of pre-
cision alignment.
Part Number: 414-309 (Kit)
Adjustable X/Y Mounting Head only

Adjustable X/Y Tail Support only

1-888-783-9675
4-14 ET 2" (50.8mm) Items
2" Diameter (50.8mm) Boring Bars
 Staggered 1/2” tool ports every three

inches along the bar.
 Tool ports are broached and threaded
 Bars are made from C1045 precision
ground shafting
 Available chrome plated and polished
3’ Bar
Part # 414-213-36 Polished Bar
Part # 414-213-36C Chrome Bar
5’ Bar
7’ Bar
Note: For Metric bars place an M at the
end of the part number
Custom bars and lengths available on
request
2" (50.8mm) Line-Up Cones
 Steel cones
 Precision alignment
 Relieved in the back to reduce weight
2 to 4” (50.8 to 101.6mm)
4 to 6” (101.6 to 152.4mm)
6 to 8” (152.4 to 203.2mm)
8 to 10” (203.2 to 254mm)


1-888-783-9675
4-14ET 2" (50.8mm) Items
2" (50.8mm) Adjustable Line-Up Tool

(Spider) for bores 8"- 16" (203mm -
406mm)
 For aligning and centering the bar when
working with bores larger than
8” (203mm). The line up tool dials out to
the diameter that you need.
 The kit comes in a custom carrying case,
with two centering tools and four sets of
extensions
2" (50.8mm) Clamping Collars

 To secure the line up cones in place
during set up
 Split collar with allen head screws
(sold in package of 2)
2" (50.8mm) Calibration Wrench

 The calibration wrench allows accurate cutting
tool adjustment in increments of .001”. All of
our boring bars have broached and threaded
tool ports with a scribed line on center. We put
an adjusting screw at the base of the cutting
tool that the calibration wrench fits into. There
are 50 graduations on the wrench. With each
graduation past the scribed line the cutting tool
advances .001”
Part Number: 414-207 (c/w 5 cutting tool
adjusters)
Cutting Tool Adjusters
Part Number: 414-206 A York
(sold in package of 5) Exclusive!

1-888-783-9675
4-14ET 2" (50.8mm) Items
2" (50.8mm) Accessories Tool Box

Includes:
 Tool box (26”)
 Set screws
 Sample Micro 100 carbide tooling
 Wrenches
 Allen keys
2" (50.8mm) Large Bore Adapters
 The York large bore adapters clamp securely

to our 2” (50.8mm) boring bar. The large
bore adapter supports the tool bit to
accommodate larger bores over 6” (152mm)
in diameter. The 6-10” (152-254mm) adapter
can be used with the York calibration wrench
and is our standard adapter. Custom large
bore adapters are also available for 10-
13” (254-330mm) and 13-16” (330-406mm)
6 to 10” (152.4 to 254mm)

10 to 13” (254mm to 330mm)

13 to 16” (330.2 to 406mm)


1-888-783-9675
4-14ET 1-1/4" (32mm) Items
1 1/4" (32mm) Mounting Head

 One bore welder mount plate included
Replacement Inserts
1 1/4" (32mm) Tail Support

 4 bolt flange bearing on a replaceable
mounting plate
Replacement Flange
1 1/4" (32mm) Line-Up Cones

 Steel cones 1 1/4 to 3” and 3 to 5”
 1 1/4 to 3”
 3 to 5”
1 1/4” to 3” (32 to 76mm)
Part Number: 414-103 (set of 2)
3” to 5” (76 to 127mm)
Part Number: 414-104 (set of 2)

1-888-783-9675
4-14ET 1-1/4" (32mm)Items
1 1/4" (32mm) Boring Bars

 Staggered 3/8” (9.5mm) tool ports every
3” (76.2mm) along the bar
ground shafting
4’ Bar (1219.2mm)
Part Number: 414-113-48 Polished bar
Part Number: 414-113-48C Chrome bar
6’ Bar (1828.8mm)
Part Number: 414-113-72 Polished bar
Part Number: 414-113-72C Chrome bar
Note: For Metric bars place an M at the
end of the part number
request
1 1/4" (32mm) 3-5" (76 to 127mm)

Large Bore Adaptor
 This adapter is used to support tooling for
bores greater than 3”. It will help reduce
tool breakage and chatter. For maximum
success we recommend using our 2” bars
for bores greater than 3”
1 1/4" (32mm) Clamping Collars
 Used to secure the line up cones in place

during set up
 Spit collar with allen head screw

(sold in a package of 2)

1-888-783-9675
4-14ET 1-1/4" (32mm) Items
1 1/4" Calibration Wrench

 The calibration wrench allows accurate
cutting tool adjustment in increments
of .001”. All of our boring bars have
broached and threaded tool ports with a
scribed line on center. We put an adjusting
screw at the base of the cutting tool that the
calibration wrench fits into. There are 50
graduations on the wrench. With each grad-
uation past the scribed line the cutting tool
advances .001”.
Part Number: 414-107 (c/w 5 cutting tool
adjusters)
A York
Cutting Tool Adjusters
Exclusive!
(sold in package of 5)
1 1/4" (32mm) Accessories Tool Box
Includes:
 Tool box (21”)
 Set screws
 Wrenches
 Allen keys

1-888-783-9675
4-14 ET 2-1/4" (57mm) Items
Recommended with our hydraulic bar drives
2 ¼” (57mm) Mounting Head (Standard)

 One bore welder mount plate included
Replacement Inserts
X/Y Adjustable Mounting Head & Tail

Support
 Freedom to move - the X/Y mounting head
allows you to move the bar 5/8" (15.8mm)
in any direction from center. You also have
a 6 degree spherical adjustment. This fea-
ture is a huge asset for bores larger than
10" (254mm) that might require an extra
degree of precision alignment.
Part Number: 414-609 (Kit)
Mounting Head Only
Part Number: 414-610 Adjustable X/Y
Adjustable X/Y Tail Support Only
2 ¼” (57mm) Tail Support

 4 bolt flange bearing on a replaceable
mounting plate
Part Number: 414–602
Replacement Flange

1-888-783-9675
4-14 ET 2-1/4" (57mm) Items
2 ¼” (57mm) Boring Bars

 Staggered 1/2" (12.7mm) tool ports eve-
ry 3” (76mm) along the bar.
ground shafting.
3' (914mm) Boring Bar
Part Number: 414-613-36 Polished Bar
Part Number: 414-613-36C Chrome Bar
5' (1524mm) Bar
8' (2438mm) Bar
Note: for Metric place an M at the end of
the part number
request
2 ¼” (57mm) Line-Up Cones

 Steel cones
 Relieved in the back to reduce weight
2" to 4" (50.8 to 101.6mm)
Part Number: 414-603 (Set of 2)
4" to 6" (101.6 to 152.4mm)
6" to 8" (152.4 to 203.2mm)

1-888-783-9675
4-14 ET 2-1/4" (57mm) Items
2 ¼” (57mm) Adjustable Line-Up Tool (Spider)

for bores 8" to 24"
 For aligning and centering the bar when
working with bores larger than 8" (203mm). The
line up tool dials out to the diameter you need.
 The kit comes in a custom carrying case, with
two centering tools and four sets of extensions.
2 ¼” (57mm) Clamping Collars

 Used to secure the line up cones in place
during setup
 Split collar with allen head screw
Accessories Tool Box

Includes:
 Tool Box (26”)
 Set Screws
 Allen keys
 Key Stock
 Wrenches

1-888-783-9675
Optional Accessories
Facing Tools
 The York facing tools are designed to
machine surfaces 90 degrees to the bore.
The facing tool attaches to our
2" (50.8mm) boring bar. Two tool ports
are set in the facing tool; one at 45 de-
grees and the other at 90 degrees. Each
revolution of the bar actuates a gear driv-
en lead screw that advances the cutting
tool .005" (.127mm).
Part Number: FT-1000 Max 10” (254mm)
FT-1000 FT-9000
Part Number: FT 9000 Max 18” (457mm)
Off-Set Drive
(A unique feature no one else has)
 Our offset drive feature allows more flex-
ibility than thru bar designs. The York line
-boring machine is an excellent choice for
working in constricted areas, as the
driveline allows 30 degrees offset in any
direction from the boring bar alignment.
Part Number: OFF-000
Carbide Insert Tool Package

1/2" (12mm)
 The York insert tool places the carbide
cutting surface into the center of the
bore, substantially improving cutting tool
performance while extending tool holder
life. Our tool holders use standard inserts
that are readily available from most
cutting tool suppliers. Insert tooling takes
the guesswork out of tool geometry and
improves the overall performance of your
line boring machine.
Part Number: ITK-000

1-888-783-9675
Thru Bar Measuring Kits

1.9 - 12" (48.26 - 304.8mm) or
1.9 - 16" (48.26—406.4mm) Diameters
 Our thru bar measuring tool allows you to
accurately measure the bore without
removing the bar. The measuring tool is
placed into an adjacent tool port and
traversed into the bore. By loosening the
setscrew, the spring loaded measuring
tool snaps opens - capturing the size of
the bore. Tighten the setscrew and
traverse the tool from the bore. Pull the MT2-1000
measuring tool out of the bar. Using a
micrometer, measure the thru bar tool for
the diameter of the bore.
1.9" to 12" (48.26 to 304.8mm)
Part Number: MT2-1000
1.9" to 16" (48.26 to 406.4mm)
Part Number: MT2-2000
MT2-2000
Snap Ring Tool

 3.8 to 7" (96.5 to 177.8mm)
 5/8" stroke (15.8mm)
 Hydraulic feed
 Accurate adjustment
Part Number: SR- 000
Ripper Shank Repair Kit
 A unique option that saves having to pull

the tracks to repair worn bores on D-9 to
D-10 Cat
(*Call us for kits to repair other models)
Part Number: RIP-000

1-888-783-9675
Micro 100 Brazed Carbide Cutting Tools

 Micro 100 is highly shock resistant, will not
chip or break under normal machining
conditions and is unexcelled in interrupted
cutting. Micro 100 carbide is a space age
carbide with superior rupture strength for
exceptional machining versatility.
#6 - 3/8"
Part Number: AR-6 or AL-6 MICRO 100 “A” Style
Part Number: BR-6 or BL-6 MICRO 100 “B” Style
#8 - 1/2"
Part Number: AR-8 or AL-8 MICRO 100 “A” Style
Part Number: BR-8 or BL-8 MICRO 100 “B” Style
Bore Welder Adapter Plates

(Sold in package of 2)
* NOTE: Will work with most brands of bore welders

1-888-783-9675

4-14 HD Line Boring Machine and Accessories Catalogue: Portable - Powerful - Flexible - Easy To Use

Uploaded by

Copyright:

Available Formats

4-14 HD Line Boring Machine and Accessories Catalogue: Portable - Powerful - Flexible - Easy To Use

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

4-14 HD Line Boring Machine and Accessories Catalogue: Portable - Powerful - Flexible - Easy To Use

Uploaded by

Copyright:

Available Formats

4-14 HD Line Boring Machine

Manual Hydraulic Bar Drive

Proportional Hydraulic Bar Drive

Portable - Powerful - Flexible - Easy to Use

Line Boring | Bore Welding | Inline Turning | Rotary Milling

3 Hydraulic Power supplies:

 Boring diameters from 3 –24” (76—609mm)

Portable - Powerful - Flexible - Easy to Use

Line Boring | Bore Welding | Inline Turning | Rotary Milling 2

 Boring diameters from 3—24” (76-609mm)

Part Number: 4-14HD-M

 Remote Pendant allows for convenient control

Part Number: 4-14HD-P

Line Boring | Bore Welding | Inline Turning | Rotary Milling 3

Manual Control Bar Drives:

Line Boring | Bore Welding | Inline Turning | Rotary Milling 4

10HP Three Phase

Proportional Bar Drives:

Line Boring | Bore Welding | Inline Turning | Rotary Milling 5

Custom packaging is also available. All our

Line Boring | Bore Welding | Inline Turning | Rotary Milling 6

 Two bearings for added support

2" (50.8mm) Tail Support

 4 bolt flange bearings on replaceable

Replacement Weld Plate

X/Y Adjustable Mounting Kit

 Freedom to move - the X/Y mounting

Adjustable X/Y Mounting Head only

Line Boring | Bore Welding | Inline Turning | Rotary Milling 7

2" Diameter (50.8mm) Boring Bars

 Staggered 1/2” tool ports every three

2" (50.8mm) Line-Up Cones

8 to 10” (203.2 to 254mm)

Line Boring | Bore Welding | Inline Turning | Rotary Milling 8

2" (50.8mm) Adjustable Line-Up Tool

2" (50.8mm) Clamping Collars

2" (50.8mm) Calibration Wrench

Line Boring | Bore Welding | Inline Turning | Rotary Milling 9

2" (50.8mm) Accessories Tool Box

2" (50.8mm) Large Bore Adapters

 The York large bore adapters clamp securely

6 to 10” (152.4 to 254mm)

10 to 13” (254mm to 330mm)

13 to 16” (330.2 to 406mm)

Line Boring | Bore Welding | Inline Turning | Rotary Milling 10

1 1/4" (32mm) Mounting Head

1 1/4" (32mm) Tail Support

1 1/4" (32mm) Line-Up Cones

Line Boring | Bore Welding | Inline Turning | Rotary Milling 11

1 1/4" (32mm) Boring Bars

1 1/4" (32mm) 3-5" (76 to 127mm)

1 1/4" (32mm) Clamping Collars

 Used to secure the line up cones in place

Part Number: 414-105

Line Boring | Bore Welding | Inline Turning | Rotary Milling 12

1 1/4" Calibration Wrench

1 1/4" (32mm) Accessories Tool Box

Part Number: 414-150